Bug#689096: linux-image-3.2.0-3-686-pae: ipw2200 crashes on wakeup
Package: src:linux
Version: 3.2.23-1
Severity: normal
Dear Maintainer,
Ever since I upgraded to wheezy I get occasional crashes in the ipw2200
driver when my laptop wakes up from suspend. It does't always happen and
it used to work flawlessly with squeeze.
Here's what dmesg has to say about this:
[59928.488934] wlan: Coming out of suspend...
[59928.488943] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[59928.490888] ------------[ cut here ]------------
[59928.490899] WARNING: at /build/buildd-linux_3.2.23-1-i386-qhsd1M/linux-3.2.23/drivers/base/firmware_class.c:537 _request_firmware+0xad/0x2f9()
[59928.490922] Hardware name: 25256NG
[59928.490925] Modules linked in: ipw2200 msr tg3 libphy cryptd aes_i586 aes_generic lib80211_crypt_ccmp cpufreq_userspace cpufreq_stats cpufreq_conservative cpufreq_powersave fuse ext3 jbd mbcache hidp hid rfcomm bluetooth crc16 dm_crypt dm_mod snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss thinkpad_acpi snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer pcmcia libipw snd_seq_device iTCO_wdt cfg80211 rfkill iTCO_vendor_support snd lib80211 nvram soundcore yenta_socket pcmcia_rsrc pcmcia_core psmouse rng_core snd_page_alloc serio_raw i2c_i801 pcspkr battery acpi_cpufreq ac power_supply mperf evdev processor xfs sg sd_mod crc_t10dif ata_generic ata_piix ahci libahci libata i915 scsi_mod sdhci_pci sdhci mmc_core i2c_algo_bit drm_kms_helper drm uhci_hcd ehci_hcd usbcore thermal video i2c_core thermal_sys usb_common button [last unloaded: ipw2200]
[59928.491047] Pid: 19479, comm: kworker/0:0 Tainted: G W 3.2.0-3-686-pae #1
[59928.491050] Call Trace:
[59928.491059] [<c1037fcc>] ? warn_slowpath_common+0x68/0x79
[59928.491063] [<c11f9356>] ? _request_firmware+0xad/0x2f9
[59928.491068] [<c1037fea>] ? warn_slowpath_null+0xd/0x10
[59928.491073] [<c11f9356>] ? _request_firmware+0xad/0x2f9
[59928.491077] [<c11f95ab>] ? request_firmware+0x9/0xc
[59928.491088] [<f89b3f78>] ? ipw_up+0xdd/0x1165 [ipw2200]
[59928.491094] [<c102cccb>] ? finish_task_switch+0x6d/0x94
[59928.491109] [<f856b928>] ? scsi_request_fn+0x303/0x3c3 [scsi_mod]
[59928.491116] [<c12bf943>] ? _raw_spin_lock_irqsave+0x8/0x21
[59928.491121] [<c1029ee0>] ? should_resched+0x5/0x1e
[59928.491128] [<f89b51e8>] ? ipw_bg_up+0x1c/0x25 [ipw2200]
[59928.491134] [<c104965c>] ? process_one_work+0x112/0x1fa
[59928.491141] [<f89b51cc>] ? ipw_net_init+0x32/0x32 [ipw2200]
[59928.491146] [<c104a367>] ? worker_thread+0xa9/0x122
[59928.491150] [<c104a2be>] ? manage_workers.isra.23+0x13d/0x13d
[59928.491155] [<c104cca7>] ? kthread+0x63/0x68
[59928.491160] [<c104cc44>] ? kthread_worker_fn+0x101/0x101
[59928.491167] [<c12c473e>] ? kernel_thread_helper+0x6/0x10
[59928.491170] ---[ end trace 489947a6c8cb68b7 ]---
[59928.491174] ipw2200 0000:04:02.0: firmware: ipw2200-bss.fw will not be loaded
[59928.491178] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -16
[59928.491182] ipw2200: Unable to load firmware: -16
-- Package-specific info:
** Version:
Linux version 3.2.0-3-686-pae (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 03:50:34 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-3-686-pae root=UUID=88262002-52a8-49fa-ab66-637759ec0159 ro acpi_sleep=s3_bios splash quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[124138.880450] snd_intel8x0 0000:00:1e.2: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003)
[124138.880608] tg3 0000:02:00.0: restoring config space at offset 0xc (was 0x0, writing 0xac000000)
[124138.880638] tg3 0000:02:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[124138.896067] sdhci-pci 0000:04:00.1: BAR 0: set to [mem 0xa0201000-0xa02010ff] (PCI address [0xa0201000-0xa02010ff])
[124138.896105] sdhci-pci 0000:04:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[124138.896115] sdhci-pci 0000:04:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[124138.896376] PM: early resume of devices complete after 56.287 msecs
[124138.896531] i915 0000:00:02.0: power state changed by ACPI to D0
[124138.896536] i915 0000:00:02.0: power state changed by ACPI to D0
[124138.896545] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[124138.896550] i915 0000:00:02.0: setting latency timer to 64
[124138.952450] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[124138.952454] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[124138.952461] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[124138.952469] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[124138.952496] usb usb2: root hub lost power or was reset
[124138.952509] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[124138.952513] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[124138.952519] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[124138.952527] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[124138.952552] usb usb3: root hub lost power or was reset
[124138.952566] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[124138.952574] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[124138.952599] usb usb4: root hub lost power or was reset
[124138.952613] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[124138.952621] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[124138.952646] usb usb5: root hub lost power or was reset
[124138.952659] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[124138.952665] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[124138.952672] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[124138.952680] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[124138.952710] pci 0000:00:1e.0: setting latency timer to 64
[124138.952722] snd_intel8x0 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[124138.952730] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[124138.952772] ata_piix 0000:00:1f.2: setting latency timer to 64
[124138.952798] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[124138.952806] tg3 0000:02:00.0: PME# disabled
[124138.952818] sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[124138.952823] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[124138.953841] wlan: Coming out of suspend...
[124138.953850] ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[124138.955827] sd 0:0:0:0: [sda] Starting disk
[124139.105097] Extended CMOS year: 2000
[124139.116438] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[124139.116444] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[124139.116450] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[124139.116455] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[124139.116622] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[124139.132377] ata1.00: configured for UDMA/100
[124139.304075] usb 4-2: reset full-speed USB device number 2 using uhci_hcd
[124139.989825] PM: resume of devices complete after 1093.385 msecs
[124139.989963] PM: Finishing wakeup.
[124139.989966] Restarting tasks ... done.
[124140.008138] video LNXVIDEO:00: Restoring backlight state
[124142.164072] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[124142.164192] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[124142.164257] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[124142.164270] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[124142.165008] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[124142.170165] ADDRCONF(NETDEV_UP): eth0: link is not ready
[124142.172140] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[124142.172196] ehci_hcd 0000:00:1d.7: PME# enabled
[124142.176931] ADDRCONF(NETDEV_UP): wlan: link is not ready
[124142.179597] ADDRCONF(NETDEV_UP): wlan: link is not ready
[124142.188044] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[124148.661847] ADDRCONF(NETDEV_CHANGE): wlan: link becomes ready
[124159.144028] wlan: no IPv6 routers present
[124685.874475] NMI watchdog enabled, takes one hw-pmu counter.
[124686.180919] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[124686.196099] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xa0040000-0xa00403ff] (PCI address [0xa0040000-0xa00403ff])
[124686.196123] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[124686.196152] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[124686.196191] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[124686.196250] ehci_hcd 0000:00:1d.7: PME# disabled
[124686.196267] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[124686.196281] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[124686.196304] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[124686.196320] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[124686.251739] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[124686.251754] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[124686.253858] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[124686.253872] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[124686.253890] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[124686.253907] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[124686.295476] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[124686.295491] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[124686.295620] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[124686.295632] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[124686.295649] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[124686.295665] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[124686.339422] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[124686.339441] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[131982.226889] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[131982.228749] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[131982.232171] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[131982.232225] ehci_hcd 0000:00:1d.7: PME# enabled
[131982.244372] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[131982.244484] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
[131982.248391] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[131982.262044] uhci_hcd 0000:00:1d.3: PCI INT D disabled
** Model information
not available
** Loaded modules:
ipw2200
msr
tg3
libphy
cryptd
aes_i586
aes_generic
lib80211_crypt_ccmp
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
fuse
ext3
jbd
mbcache
hidp
hid
rfcomm
bluetooth
crc16
dm_crypt
dm_mod
snd_intel8x0
snd_ac97_codec
ac97_bus
snd_pcm_oss
snd_mixer_oss
thinkpad_acpi
snd_pcm
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
snd_timer
pcmcia
libipw
snd_seq_device
iTCO_wdt
cfg80211
rfkill
iTCO_vendor_support
snd
lib80211
nvram
soundcore
yenta_socket
pcmcia_rsrc
pcmcia_core
psmouse
rng_core
snd_page_alloc
serio_raw
i2c_i801
pcspkr
battery
acpi_cpufreq
ac
power_supply
mperf
evdev
processor
xfs
sg
sd_mod
crc_t10dif
ata_generic
ata_piix
ahci
libahci
libata
i915
scsi_mod
sdhci_pci
sdhci
mmc_core
i2c_algo_bit
drm_kms_helper
drm
uhci_hcd
ehci_hcd
usbcore
thermal
video
i2c_core
thermal_sys
usb_common
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: IBM ThinkPad Z60t [1014:0575]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller])
Subsystem: IBM Device [1014:0582]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at a0000000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03)
Subsystem: IBM Device [1014:0582]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 60000000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: a0100000-a01fffff
Prefetchable memory behind bridge: 0000000060100000-00000000602fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:0565]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:0565]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:0565]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:0565]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: IBM Device [1014:0566]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at a0040000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=07, sec-latency=64
I/O behind bridge: 00002000-00005fff
Memory behind bridge: a0200000-afffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: IBM Device [1014:0581]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at a0040800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at a0040400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
Subsystem: IBM Device [1014:0568]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 03) (prog-if 80 [Master])
Subsystem: IBM Device [1014:056a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
Subsystem: IBM Device [1014:056b]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11)
Subsystem: IBM ThinkPad Z60t [1014:0577]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0100000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
04:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 8d)
Subsystem: IBM Device [1014:0555]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=04, secondary=05, subordinate=06, sec-latency=176
Memory window 0: d0000000-d3ffffff (prefetchable)
Memory window 1: a4000000-a7ffffff
I/O window 0: 00002400-000024ff
I/O window 1: 00002000-000020ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
04:00.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 13)
Subsystem: IBM ThinkPad X60s / Z60t [1014:0556]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 17
Region 0: Memory at a0201000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
04:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection [8086:4224] (rev 05)
Subsystem: Intel Corporation Device [8086:1011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at a0202000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (700, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-686-pae depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-3-686-pae recommends:
pn firmware-linux-free <none>
ii libc6-i686 2.13-35
Versions of packages linux-image-3.2.0-3-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-23
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
ii firmware-ipw2x00 0.36
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-686-pae/prerm/removing-running-kernel-3.2.0-3-686-pae: true
linux-image-3.2.0-3-686-pae/postinst/depmod-error-initrd-3.2.0-3-686-pae: false
* linux-image-3.2.0-3-686-pae/postinst/missing-firmware-3.2.0-3-686-pae:
Reply to: