Bug#688214: linux-image-3.2.0-3-rt-amd64: please add detection for device 0b05:179d in rt2800usb
Package: src:linux
Version: 3.2.23-1
Severity: normal
The module rt2800usb didn't get loaded when I plugged in my Asus USB-N53 wifi
dongle. Also loading it manually with modbrobe didn't help. I had to set the
option "rt2800usb - Include support for unknown (USB) devices
(RT2800USB_UNKNOWN)" in the kernel to get it working. You'll find information
from lsusb -v below.
I wasn't sure if I had to report this against the kernel package or somewhere
else, sorry if it's in the wrong place.
Thanks,
Sylvain
** lsusb -v output:
Bus 002 Device 005: ID 0b05:179d ASUSTek Computer, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0b05 ASUSTek Computer, Inc.
idProduct 0x179d
bcdDevice 1.01
iManufacturer 1 Ralink
iProduct 2 802.11 n WLAN
iSerial 3 1.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 450mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 7
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 1.0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
-- Package-specific info:
** Version:
Linux version 3.2.0-3-rt-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP PREEMPT RT Mon Jul 23 03:37:45 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-3-rt-amd64 root=/dev/mapper/midgar-root ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 6.913794] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1.2/1-1.2.1.2:1.1/input/input11
[ 6.914391] generic-usb 0003:1E54:2030.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1a.0-1.2.1.2/input1
[ 6.914469] usbcore: registered new interface driver usbhid
[ 6.914473] usbhid: USB HID core driver
[ 6.917580] usb 1-1.2.1.3: new full-speed USB device number 11 using ehci_hcd
[ 7.012606] usb 1-1.2.1.3: New USB device found, idVendor=046d, idProduct=c52b
[ 7.012611] usb 1-1.2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.012616] usb 1-1.2.1.3: Product: USB Receiver
[ 7.012619] usb 1-1.2.1.3: Manufacturer: Logitech
[ 7.065885] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2.1.3/input2
[ 7.068081] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1.3/1-1.2.1.3:1.2/0003:046D:C52B.0005/input/input12
[ 7.068655] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1a.0-1.2.1.3:1
[ 7.085261] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
[ 7.178250] scsi 6:0:0:0: Direct-Access WD My Book 1110 1030 PQ: 0 ANSI: 4
[ 7.178948] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0
[ 7.178954] usb 2-1.4: config 1 has no interface number 0
[ 7.179245] scsi 6:0:0:1: CD-ROM WD Virtual CD 1110 1030 PQ: 0 ANSI: 4
[ 7.180249] scsi 6:0:0:2: Enclosure WD SES Device 1030 PQ: 0 ANSI: 4
[ 7.180796] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204
[ 7.180801] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 7.180806] usb 2-1.4: Product: Qualcomm Gobi 2000
[ 7.180809] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[ 7.183577] sd 6:0:0:0: [sdb] 1952151552 512-byte logical blocks: (999 GB/930 GiB)
[ 7.185449] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.185457] sd 6:0:0:0: [sdb] Mode Sense: 23 00 10 00
[ 7.187686] sd 6:0:0:0: [sdb] No Caching mode page present
[ 7.187692] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.189195] sr1: scsi3-mmc drive: 51x/51x caddy
[ 7.193191] sr 6:0:0:1: Attached scsi CD-ROM sr1
[ 7.193676] sd 6:0:0:0: [sdb] No Caching mode page present
[ 7.193681] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.195218] sdb: sdb1
[ 7.203789] sd 6:0:0:0: [sdb] No Caching mode page present
[ 7.203794] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.203799] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 7.205009] Adding 4624380k swap on /dev/mapper/midgar-swap_1. Priority:-1 extents:1 across:4624380k SS
[ 7.213550] ses 6:0:0:2: Attached Enclosure device
[ 7.252940] usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
[ 7.298128] usbcore: registered new interface driver usbserial
[ 7.298161] USB Serial support registered for generic
[ 7.337917] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.345624] usb 2-1.8: New USB device found, idVendor=1b96, idProduct=0001
[ 7.345626] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.345628] usb 2-1.8: Product: DuoSense
[ 7.345630] usb 2-1.8: Manufacturer: N-trig
[ 7.346884] usbcore: registered new interface driver usbserial_generic
[ 7.346888] usbserial: USB Serial Driver core
[ 7.349022] USB Serial support registered for Qualcomm USB modem
[ 7.349107] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[ 7.349490] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 7.349528] usbcore: registered new interface driver qcserial
[ 7.557421] RPC: Registered named UNIX socket transport module.
[ 7.557423] RPC: Registered udp transport module.
[ 7.557424] RPC: Registered tcp transport module.
[ 7.557426] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.565722] FS-Cache: Loaded
[ 7.576856] FS-Cache: Netfs 'nfs' registered for caching
[ 7.583656] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.644314] scsi 7:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0
[ 7.657857] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 7.672694] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 7.716516] fuse init (API version 7.17)
[ 7.728155] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 7.729263] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.170769] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 9.509075] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 10.789179] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 10.789804] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.565602] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 11.823086] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 12.660885] Bluetooth: RFCOMM TTY layer initialized
[ 12.660913] Bluetooth: RFCOMM socket layer initialized
[ 12.660917] Bluetooth: RFCOMM ver 1.11
[ 12.663022] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.663026] Bluetooth: BNEP filters: protocol multicast
[ 12.696901] lp: driver loaded but no devices found
[ 12.702953] ppdev: user-space parallel port driver
[ 20.538091] vboxdrv: Found 4 processor cores.
[ 20.538630] vboxdrv: fAsync=0 offMin=0x16b offMax=0xfdb
[ 20.538752] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 20.538755] vboxdrv: Successfully loaded version 4.1.8_Debian (interface 0x00190000).
[ 20.560184] vboxpci: IOMMU not found (not registered)
[ 20.942089] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 20.948951] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 20.961157] eth0: no IPv6 routers present
[ 21.192587] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 21.199444] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 21.334147] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.427280] [drm] Changing LVDS panel from (-hsync, -vsync) to (-hsync, +vsync)
[ 34.402696] [drm] Changing LVDS panel from (-hsync, +vsync) to (-hsync, -vsync)
[ 177.563234] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 336.307827] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
[ 336.323771] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 424.309090] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 1069.525250] usb 2-1.2: new high-speed USB device number 5 using ehci_hcd
[ 1069.635143] usb 2-1.2: New USB device found, idVendor=0b05, idProduct=179d
[ 1069.635149] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1069.635153] usb 2-1.2: Product: 802.11 n WLAN
[ 1069.635156] usb 2-1.2: Manufacturer: Ralink
[ 1069.635159] usb 2-1.2: SerialNumber: 1.0
** Model information
sys_vendor: LENOVO
product_name: 2904FYG
product_version: ThinkPad T410s
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 6UET54WW (1.34 )
board_vendor: LENOVO
board_name: 2904FYG
board_version: Not Available
** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
cpufreq_userspace
parport_pc
ppdev
lp
parport
bnep
rfcomm
autofs4
uinput
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
qcserial
usb_wwan
ext2
usbserial
ses
enclosure
hid_logitech_dj
usbhid
hid
loop
uvcvideo
usb_storage
videodev
uas
media
v4l2_compat_ioctl32
btusb
bluetooth
snd_hda_codec_hdmi
snd_hda_codec_conexant
joydev
arc4
mxm_wmi
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
coretemp
crc32c_intel
snd_mixer_oss
sr_mod
ghash_clmulni_intel
aesni_intel
evdev
cdrom
cryptd
aes_x86_64
thinkpad_acpi
aes_generic
i915
snd_pcm
battery
ac
nvram
power_supply
drm_kms_helper
drm
snd_seq_midi
i2c_algo_bit
acpi_cpufreq
tpm_tis
tpm
snd_rawmidi
iwlwifi
tpm_bios
snd_seq_midi_event
mac80211
psmouse
cfg80211
serio_raw
snd_seq
rfkill
sdhci_pci
snd_timer
sdhci
snd_seq_device
ehci_hcd
mmc_core
snd
usbcore
i2c_i801
soundcore
intel_ips
i2c_core
usb_common
video
snd_page_alloc
e1000e
wmi
mperf
processor
button
ext4
mbcache
jbd2
crc16
dm_mod
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
Subsystem: Lenovo Device [17aa:2193]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:2159]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Lenovo Device [17aa:215f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2727800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series Chipset KT Controller [8086:3b67] (rev 06) (prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:2162]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1808 [size=8]
Region 1: Memory at f2524000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 06)
Subsystem: Lenovo Device [17aa:2153]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f2525000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:2163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f2728000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b57] (rev 06)
Subsystem: Lenovo Device [17aa:215e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 44
Region 0: Memory at f2520000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f2400000-f24fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2800000-00000000f28fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:2163]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2728400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series/3400 Series Chipset LPC Interface Controller [8086:3b0f] (rev 06)
Subsystem: Lenovo Device [17aa:2166]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:2168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at 1860 [size=8]
Region 1: I/O ports at 1814 [size=4]
Region 2: I/O ports at 1818 [size=8]
Region 3: I/O ports at 1810 [size=4]
Region 4: I/O ports at 1840 [size=32]
Region 5: Memory at f2727000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
Subsystem: Lenovo Device [17aa:2167]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2728800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
Subsystem: Lenovo Device [17aa:2190]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2526000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 35)
Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN [8086:1111]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
05:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 01)
Subsystem: Lenovo Device [17aa:2133]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1f00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
Subsystem: Lenovo Device [17aa:2196]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 1058:1110 Western Digital Technologies, Inc.
Bus 001 Device 004: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 005: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 006: ID 0a5c:217f Broadcom Corp. Bluetooth Controller
Bus 001 Device 007: ID 17ef:480d Lenovo Integrated Webcam [R5U877]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 008: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 009: ID 0424:4060 Standard Microsystems Corp. Ultra Fast Media Reader
Bus 001 Device 010: ID 1e54:2030 TypeMatrix 2030 USB Keyboard
Bus 001 Device 011: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc.
Bus 002 Device 004: ID 1b96:0001 N-Trig Duosense Transparent Electromagnetic Digitizer
Bus 002 Device 005: ID 0b05:179d ASUSTek Computer, Inc.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-3-rt-amd64 (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-rt-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.101
ii linux-base 3.5
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-3-rt-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-3-rt-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc 1.99-17
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-rt-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi 0.35
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink 0.36
pn firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-rt-amd64/prerm/removing-running-kernel-3.2.0-3-rt-amd64: true
linux-image-3.2.0-3-rt-amd64/postinst/depmod-error-initrd-3.2.0-3-rt-amd64: false
linux-image-3.2.0-3-rt-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-rt-amd64/postinst/missing-firmware-3.2.0-3-rt-amd64:
Reply to: