Bug#686921: linux-image-3.2.0-3-686-pae: D-link DWA-131 USB Wifi adapter failed to resume after suspend or hibernate
Package: src:linux
Version: 3.2.23-1
Severity: normal
Hi,
My D-link DWA-131 USB Wifi adapter works fine on Debian. However, when I try
to resume from suspend or hibernate, the wifi adapter does not work again. I
have to physically remove it and plug it again to have it working.
Some interesting lines in dmesg:
[16453.396341] Suspending console(s) (use no_console_suspend to debug)
[16453.396786] r8712: suspending...
[16453.396793] r8712: unable to suspend
...
[16454.212410] r8712: resuming...
[16454.212420] r8712: unable to resume
[16454.280185] usb 1-8: reset high-speed USB device number 3 using ehci_hcd
Xavier
-- Package-specific info:
** Version:
Linux version 3.2.0-3-686-pae (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 03:50:34 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=0b6f859a-027b-4d59-bac2-8fae9ed44c57 ro quiet
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[33229.344087] wlan0: no IPv6 routers present
[33483.856039] wlan0: no IPv6 routers present
[33912.132200] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[33912.132214] PM: Basic memory bitmaps created
[33912.132219] PM: Syncing filesystems ... done.
[33912.303698] Freezing user space processes ... (elapsed 0.01 seconds) done.
[33912.320227] PM: Preallocating image memory... done (allocated 281063 pages)
[33913.278908] PM: Allocated 1124252 kbytes in 0.95 seconds (1183.42 MB/s)
[33913.278914] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[33913.292707] Suspending console(s) (use no_console_suspend to debug)
[33913.292801] r8712: suspending...
[33913.292807] r8712: unable to suspend
[33913.293607] ACPI handle has no context!
[33913.293625] ATL1E 0000:03:00.0: PCI INT A disabled
[33913.293636] ACPI handle has no context!
[33913.294028] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[33913.496209] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[33913.497702] ata_piix 0000:00:1f.2: PCI INT B disabled
[33913.497785] PM: freeze of devices complete after 205.065 msecs
[33913.498384] PM: late freeze of devices complete after 0.590 msecs
[33913.498428] ACPI: Preparing to enter system sleep state S4
[33913.502279] PM: Saving platform NVS memory
[33913.503594] Disabling non-boot CPUs ...
[33913.608167] CPU 1 is now offline
[33913.609490] PM: Creating hibernation image:
[33913.612102] PM: Need to copy 195337 pages
[33913.612102] PM: Normal pages needed: 68772 + 1024, available pages: 158918
[33913.612102] PM: Restoring platform NVS memory
[33913.612102] Enabling non-boot CPUs ...
[33913.612102] Booting Node 0 Processor 1 APIC 0x1
[33913.612102] smpboot cpu 1: start_ip = 9b000
[33913.505259] Initializing CPU#1
[33913.505259] Calibrating delay loop (skipped) already calibrated this CPU
[33913.505259] Disabled fast string operations
[33913.621517] NMI watchdog enabled, takes one hw-pmu counter.
[33913.624288] CPU1 is up
[33913.625098] ACPI: Waking up from system sleep state S4
[33913.636630] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[33913.637202] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b80001, writing 0x2b80005)
[33913.652234] ATL1E 0000:03:00.0: BAR 0: set to [mem 0xfbfc0000-0xfbffffff 64bit] (PCI address [0xfbfc0000-0xfbffffff])
[33913.652259] ATL1E 0000:03:00.0: BAR 2: set to [io 0xec00-0xec7f] (PCI address [0xec00-0xec7f])
[33913.652356] ATL1E 0000:03:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
[33913.652541] PM: early restore of devices complete after 16.055 msecs
[33913.777608] i915 0000:00:02.0: setting latency timer to 64
[33913.777852] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[33913.777866] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[33913.777950] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[33913.778046] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[33913.778080] usb usb2: root hub lost power or was reset
[33913.778106] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[33913.778139] usb usb3: root hub lost power or was reset
[33913.778161] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[33913.778192] usb usb4: root hub lost power or was reset
[33913.778213] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[33913.778245] usb usb5: root hub lost power or was reset
[33913.778268] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[33913.778306] usb usb1: root hub lost power or was reset
[33913.782195] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[33913.782224] pci 0000:00:1e.0: setting latency timer to 64
[33913.782258] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[33913.782270] ata_piix 0000:00:1f.2: setting latency timer to 64
[33913.782384] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[33913.782398] ATL1E 0000:03:00.0: setting latency timer to 64
[33913.783376] sd 0:0:0:0: [sda] Starting disk
[33913.964444] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[33913.964454] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[33913.964721] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[33913.988843] ata1.00: configured for UDMA/133
[33914.128117] usb 1-8: reset high-speed USB device number 3 using ehci_hcd
[33914.231011] eeepc_laptop: Unable to find port
[33914.231345] eeepc_laptop: BIOS says wireless lan is unblocked, but the pci device is absent
[33914.231351] eeepc_laptop: skipped wireless hotplug as probably inappropriate for this model
[33914.281610] PM: restore of devices complete after 504.107 msecs
[33914.281800] PM: Image restored successfully.
[33914.281805] Restarting tasks ...
[33914.281963] usb 1-3: USB disconnect, device number 12
[33914.294772] done.
[33914.294818] PM: Basic memory bitmaps freed
[33914.294832] video LNXVIDEO:00: Restoring backlight state
[33914.404291] composite sync not supported
[33918.718481] ATL1E 0000:03:00.0: irq 44 for MSI/MSI-X
[33918.741349] ADDRCONF(NETDEV_UP): eth0: link is not ready
[33922.644102] usb 1-3: new high-speed USB device number 13 using ehci_hcd
[33922.779022] usb 1-3: New USB device found, idVendor=07d1, idProduct=3303
[33922.779040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33922.779053] usb 1-3: Product: 11n Adapter
[33922.779063] usb 1-3: Manufacturer: Manufacturer Realtek
[33922.779074] usb 1-3: SerialNumber: 00e04c000001
[33922.780236] r8712u: DriverVersion: v7_0.20100831
[33922.780372] r8712u: register rtl8712_netdev_ops to netdev_ops
[33922.780391] r8712u: USB_SPEED_HIGH with 4 endpoints
[33922.781534] r8712u: Boot from EFUSE: Autoload OK
[33923.585639] r8712u: CustomerID = 0x0000
[33923.585655] r8712u: MAC Address from efuse = 90:94:e4:4a:56:5f
[33923.585667] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[33925.312649] r8712u: 1 RCR=0x153f00e
[33925.313382] r8712u: 2 RCR=0x553f00e
[33925.421283] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[33946.606132] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[33957.024096] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
usbhid
hid
btrfs
crc32c
libcrc32c
zlib_deflate
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext4
jbd2
ext2
dm_mod
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
crc16
binfmt_misc
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_realtek
joydev
uvcvideo
snd_hda_intel
snd_hda_codec
iTCO_wdt
iTCO_vendor_support
i915
r8712u(C)
videodev
eeepc_laptop
snd_hwdep
media
snd_pcm
snd_page_alloc
acpi_cpufreq
snd_seq
snd_seq_device
snd_timer
rng_core
drm_kms_helper
snd
evdev
mperf
ac
battery
coretemp
power_supply
drm
psmouse
i2c_algo_bit
soundcore
i2c_core
sparse_keymap
video
pcspkr
serio_raw
rfkill
processor
button
ext3
mbcache
jbd
sg
sd_mod
crc_t10dif
ata_generic
ata_piix
libata
scsi_mod
thermal
thermal_sys
uhci_hcd
ehci_hcd
usbcore
atl1e
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:831a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 7fa00000-7fbfffff
Prefetchable memory behind bridge: 000000007fc00000-000000007fdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 000000007f800000-000000007f9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 013: ID 07d1:3303 D-Link System DWA-131 802.11n Wireless N Nano Adapter(rev.A1) [Realtek RTL8192SU]
Bus 001 Device 003: ID 05e3:0505 Genesys Logic, Inc.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-686-pae depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 9-1
ii linux-base 3.5
ii module-init-tools 9-1
Versions of packages linux-image-3.2.0-3-686-pae recommends:
ii firmware-linux-free 3.1
ii libc6-i686 2.13-35
Versions of packages linux-image-3.2.0-3-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-686-pae/postinst/depmod-error-initrd-3.2.0-3-686-pae: false
linux-image-3.2.0-3-686-pae/postinst/missing-firmware-3.2.0-3-686-pae:
linux-image-3.2.0-3-686-pae/prerm/removing-running-kernel-3.2.0-3-686-pae: true
Reply to: