Bug#684618: linux-image-3.2.0-3-686-pae: e1000 wake-on-lan does not work
Package: src:linux
Version: 3.2.23-1
Severity: important
Tags: patch upstream
In linux kernel commit d5bc77a223b0e9b9dfb002048d2b34a79e7d0b48 made wol does not work on e1000 cards.
Later, in b868179c47e9e8eadcd04c1f3105998e528988a3 it has been fixed, but has not been ported back to 3.2 series,
but that would be nice to include it in debian.
-- Package-specific info:
** Version:
Linux version 3.2.0-3-686-pae (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 03:50:34 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-3-686-pae root=/dev/mapper/vg0-root ro lapic panic=10
** Not tainted
** Kernel log:
[ 10.779512] sd 0:0:0:0: [sda] Write Protect is off
[ 10.779559] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.779613] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.781345] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 10.781522] sd 1:0:0:0: [sdb] Write Protect is off
[ 10.781569] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 10.781622] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.782864] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 10.783039] sd 2:0:0:0: [sdc] Write Protect is off
[ 10.783087] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 10.783139] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.784445] sda: sda1 sda2
[ 10.785305] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.792936] sdb: sdb1 sdb2
[ 10.795003] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 10.802798] sdc: sdc1 sdc2
[ 10.804828] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 11.056458] md: raid1 personality registered for level 1
[ 11.128072] raid6: int32x1 401 MB/s
[ 11.196042] raid6: int32x2 408 MB/s
[ 11.264021] raid6: int32x4 434 MB/s
[ 11.332184] raid6: int32x8 320 MB/s
[ 11.400028] raid6: mmxx1 1322 MB/s
[ 11.468009] raid6: mmxx2 1603 MB/s
[ 11.536035] raid6: sse1x1 1250 MB/s
[ 11.604043] raid6: sse1x2 1573 MB/s
[ 11.604087] raid6: using algorithm sse1x2 (1573 MB/s)
[ 11.605108] async_tx: api initialized (async)
[ 11.606089] xor: automatically using best checksumming function: pIII_sse
[ 11.624009] pIII_sse : 3222.000 MB/sec
[ 11.624054] xor: using function: pIII_sse (3222.000 MB/sec)
[ 11.629320] md: raid6 personality registered for level 6
[ 11.629379] md: raid5 personality registered for level 5
[ 11.629424] md: raid4 personality registered for level 4
[ 11.666262] md: md0 stopped.
[ 11.671690] md: bind<sdb1>
[ 11.672127] md: bind<sda1>
[ 11.682787] bio: create slab <bio-1> at 1
[ 11.683017] md/raid1:md0: active with 2 out of 2 mirrors
[ 11.683122] md0: detected capacity change from 0 to 268369920
[ 11.690825] md0: unknown partition table
[ 11.697206] md: md1 stopped.
[ 11.706471] md: bind<sdb2>
[ 11.706883] md: bind<sdc2>
[ 11.707471] md: bind<sda2>
[ 11.719045] md/raid:md1: device sda2 operational as raid disk 0
[ 11.719106] md/raid:md1: device sdc2 operational as raid disk 2
[ 11.719153] md/raid:md1: device sdb2 operational as raid disk 1
[ 11.719894] md/raid:md1: allocated 3174kB
[ 11.724329] md/raid:md1: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 11.728070] RAID conf printout:
[ 11.728075] --- level:5 rd:3 wd:3
[ 11.728080] disk 0, o:1, dev:sda2
[ 11.728085] disk 1, o:1, dev:sdb2
[ 11.728090] disk 2, o:1, dev:sdc2
[ 11.732341] md1: detected capacity change from 0 to 159379357696
[ 11.749593] md1: unknown partition table
[ 11.944382] device-mapper: uevent: version 1.0.3
[ 11.945305] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 12.456256] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 13.584885] udevd[280]: starting version 175
[ 13.889016] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 13.889093] ACPI: Power Button [PWRB]
[ 13.889274] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 13.889337] ACPI: Sleep Button [SLPB]
[ 13.889523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 13.889585] ACPI: Power Button [PWRF]
[ 13.902972] Marking TSC unstable due to TSC halts in idle
[ 13.903044] ACPI: acpi_idle registered with cpuidle
[ 13.909606] Switching to clocksource acpi_pm
[ 13.968498] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.986776] intel_rng: FWH not detected
[ 14.034228] iTCO_vendor_support: vendor-support=0
[ 14.048490] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 14.059984] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.060235] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 14.150426] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 14.150487] PCI: setting IRQ 5 as level-triggered
[ 14.150498] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 14.534565] Error: Driver 'pcspkr' is already registered, aborting...
[ 15.823154] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 16.182437] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 16.540551] loop: module loaded
[ 19.002524] kjournald starting. Commit interval 5 seconds
[ 19.024420] EXT3-fs (md0): using internal journal
[ 19.024472] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 19.084119] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 19.107926] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 19.613316] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.620147] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 19.621259] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.255299] RPC: Registered named UNIX socket transport module.
[ 20.255366] RPC: Registered udp transport module.
[ 20.255414] RPC: Registered tcp transport module.
[ 20.255458] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.311349] FS-Cache: Loaded
[ 20.370226] FS-Cache: Netfs 'nfs' registered for caching
[ 20.399015] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 21.881475] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 21.886264] NFSD: starting 90-second grace period
** Model information
not available
** Loaded modules:
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext3
jbd
loop
dm_crypt
snd_pcm
snd_page_alloc
snd_timer
snd
soundcore
evdev
i2c_i801
iTCO_wdt
i2c_core
pcspkr
iTCO_vendor_support
serio_raw
rng_core
shpchp
processor
button
ext4
crc16
jbd2
mbcache
dm_mod
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
xor
async_tx
raid6_pq
raid1
md_mod
sd_mod
crc_t10dif
ata_generic
sata_sil24
ata_piix
libata
thermal
scsi_mod
fan
thermal_sys
e1000
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 10.0.0.5
netmask 255.255.255.0
iface eth0 inet6 static
address 2a01:be00:0:103::2
netmask 64
gateway 2a01:be00:0:103::1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0e:0c:c0:28:4a brd ff:ff:ff:ff:ff:ff
inet 10.0.0.5/24 brd 10.0.0.255 scope global eth0
inet6 2a01:be00:0:103::2/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::20e:cff:fec0:284a/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 500 8 0 0 0 0 0 0 500 8 0 0 0 0 0 0
eth0: 395910 1223 0 0 0 0 0 139 162908 991 0 0 0 0 0 0
*** Protocol statistics:
Ip:
51 total packets received
0 forwarded
0 incoming packets discarded
51 incoming packets delivered
49 requests sent out
77 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
7 active connections openings
2 passive connection openings
2 failed connection attempts
0 connection resets received
2 connections established
1041 segments received
891 segments send out
0 segments retransmited
0 bad segments received.
2 resets sent
Udp:
90 packets received
0 packets to unknown port received.
0 packet receive errors
47 packets sent
UdpLite:
TcpExt:
8 delayed acks sent
2 packets directly queued to recvmsg prequeue.
267 packet headers predicted
62 acknowledgments not containing data payload received
637 predicted acknowledgments
IpExt:
InMcastPkts: 2
InBcastPkts: 43
OutBcastPkts: 43
InOctets: 5938
OutOctets: 5846
InMcastOctets: 64
InBcastOctets: 5486
OutBcastOctets: 5486
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub [8086:1130] (rev 04)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [88] Vendor Specific Information: Len=04 <?>
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP Bridge [8086:1131] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: e4000000-ebffffff
Prefetchable memory behind bridge: 20000000-200fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: 20100000-201fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 05) (prog-if 80 [Master])
Subsystem: Intel Corporation Device [8086:2442]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller [8086:2443] (rev 05)
Subsystem: Intel Corporation Device [8086:2442]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 5000 [size=16]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: S3 Inc. 86c360 [Trio 3D/1X], 86c362, 86c368 [Trio 3D/2X] [5333:8a13] (rev 02) (prog-if 00 [VGA controller])
Subsystem: S3 Inc. Trio3D/2X [5333:8a13]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max)
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=64M]
[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x2
02:0a.0 Ethernet controller [0200]: Intel Corporation 82541PI Gigabit Ethernet Controller [8086:107c] (rev 05)
Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter [8086:1376]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at ed020000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at ed000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c000 [size=64]
[virtual] Expansion ROM at 20180000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel driver in use: e1000
02:0b.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller [1095:3124] (rev 02)
Subsystem: Silicon Image, Inc. Device [1095:7124]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ed048000 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at ed040000 (64-bit, non-prefetchable) [size=32K]
Region 4: I/O ports at c400 [size=16]
[virtual] Expansion ROM at 20100000 [disabled] [size=512K]
Capabilities: [64] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=12
Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=12 DMCRS=128 RSCEM- 266MHz- 533MHz-
Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: sata_sil24
** USB devices:
not available
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/1 CPU core)
Locale: LANG=hu_HU.UTF-8, LC_CTYPE=hu_HU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-686-pae depends on:
ii debconf [debconf-2.0] 1.5.44
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.2.0-3-686-pae recommends:
pn firmware-linux-free <none>
ii libc6-i686 2.13-33
Versions of packages linux-image-3.2.0-3-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-686-pae/postinst/depmod-error-initrd-3.2.0-3-686-pae: false
linux-image-3.2.0-3-686-pae/postinst/missing-firmware-3.2.0-3-686-pae:
linux-image-3.2.0-3-686-pae/prerm/removing-running-kernel-3.2.0-3-686-pae: true
Reply to: