Your message dated Sun, 22 Jul 2012 07:18:35 +0100 with message-id <1342937915.5132.8.camel@deadeye.wl.decadent.org.uk> and subject line Re: unable to reproduce (was: Bug#679540: linux-image-2.6.32-5-686: cx88xx doesn't accept a legal parameter) has caused the Debian Bug report #679540, regarding linux-image-2.6.32-5-686: cx88xx doesn't accept a legal parameter to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 679540: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679540 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-686: cx88xx doesn't accept a legal parameter
- From: jsbien@mimuw.edu.pl (Janusz S. Bień)
- Date: Fri, 29 Jun 2012 17:35:58 +0200
- Message-id: <87fw9e6sgx.fsf@mimuw.edu.pl>
- Reply-to: jsbien@mimuw.edu.pl
Package: linux-2.6 Version: 2.6.32-45 Severity: normal File: /lib/modules/2.6.32-5-686/kernel/drivers/media/video/cx88/cx88xx.ko I've just installed a second hand AverMedia Studio 303 which works under Windows. However modprobe cx88xx card=6 results in FATAL: Error inserting cx88xx (/lib/modules/2.6.32-5-686/kernel/drivers/media/video/cx88/cx88xx.ko): Invalid argument and [ 3771.091382] cx88xx: `' invalid for parameter `card' Regards JSB -- Package-specific info:** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:01:19 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=a4d23e76-488c-483b-89fc-33ebf840f559 ro quiet ** Not tainted ** Kernel log: [ 8.240640] [drm] nouveau 0000:00:05.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 8.240644] [drm] nouveau 0000:00:05.0: Raw DCB entry 0: 02000300 00000023 [ 8.240647] [drm] nouveau 0000:00:05.0: Raw DCB entry 1: 03011312 00000000 [ 8.240650] [drm] nouveau 0000:00:05.0: Raw DCB entry 2: 020023f1 0040c080 [ 8.240656] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xDD1D [ 8.240730] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xDE74 [ 8.240733] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xDE75 [ 8.241090] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xDFF7 [ 8.241095] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xE040 [ 8.257783] [TTM] Zone kernel: Available graphics memory: 436412 kiB. [ 8.257786] [TTM] Zone highmem: Available graphics memory: 1670784 kiB. [ 8.257799] [drm] nouveau 0000:00:05.0: 32 MiB VRAM [ 8.260055] [drm] nouveau 0000:00:05.0: 64 MiB GART (aperture) [ 8.260474] [drm] nouveau 0000:00:05.0: Allocating FIFO number 0 [ 8.261111] [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 0 [ 8.261117] [drm] nouveau 0000:00:05.0: Initial CRTC_OWNER is 0 [ 8.261123] [drm] nouveau 0000:00:05.0: Saving VGA fonts [ 8.278107] usb 2-1: device descriptor read/all, error -62 [ 8.297544] [drm] nouveau 0000:00:05.0: Detected a VGA connector [ 8.297592] [drm] nouveau 0000:00:05.0: Detected a DVI-D connector [ 8.297617] [drm] nouveau 0000:00:05.0: Detected a TV connector [ 8.298526] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0) [ 8.298530] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on tmds encoder (output 1) [ 8.298533] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on TV encoder (output 2) [ 8.320569] cx88xx: `' invalid for parameter `card' [ 8.336028] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 8.468386] [drm] nouveau 0000:00:05.0: allocated 1920x1200 fb: 0x49000, bo f6579400 [ 8.482855] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0) [ 8.482859] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B [ 8.493701] Console: switching to colour frame buffer device 240x75 [ 8.509556] fb0: nouveaufb frame buffer device [ 8.509558] registered panic notifier [ 8.509565] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:05.0 on minor 0 [ 8.960806] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 8.960813] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 8.960817] hda_intel: Disable MSI for Nvidia chipset [ 8.960855] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 9.012020] usb 2-1: new full speed USB device using ohci_hcd and address 10 [ 9.574772] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input5 [ 9.890039] usb 2-1: device descriptor read/all, error -62 [ 9.949051] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 10.309585] Adding 1012052k swap on /dev/sda5. Priority:-1 extents:1 across:1012052k [ 10.625023] usb 2-1: new full speed USB device using ohci_hcd and address 12 [ 10.748228] EXT3 FS on sda6, internal journal [ 10.891547] loop: module loaded [ 11.509046] usb 2-1: device descriptor read/all, error -62 [ 11.569037] hub 2-0:1.0: unable to enumerate USB device on port 1 [ 12.096613] kjournald starting. Commit interval 5 seconds [ 12.096780] EXT3 FS on sda2, internal journal [ 12.096786] EXT3-fs: mounted filesystem with ordered data mode. [ 12.115957] kjournald starting. Commit interval 5 seconds [ 12.116136] EXT3 FS on sda3, internal journal [ 12.116140] EXT3-fs: mounted filesystem with ordered data mode. [ 12.232023] usb 2-1: new full speed USB device using ohci_hcd and address 14 [ 13.082052] usb 2-1: New USB device found, idVendor=046d, idProduct=0a12 [ 13.082056] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.082060] usb 2-1: Product: Logitech Wireless Headset [ 13.082062] usb 2-1: Manufacturer: Logitech [ 13.082173] usb 2-1: configuration #1 chosen from 1 choice [ 13.209843] usbcore: registered new interface driver hiddev [ 13.219344] input: Logitech Logitech Wireless Headset as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.3/input/input6 [ 13.219484] generic-usb 0003:046D:0A12.0001: input,hiddev0,hidraw0: USB HID v1.01 Device [Logitech Logitech Wireless Headset] on usb-0000:00:0b.0-1/input3 [ 13.219516] usbcore: registered new interface driver usbhid [ 13.219652] usbhid: v2.6:USB HID core driver [ 13.391157] fuse init (API version 7.13) [ 13.407484] usbcore: registered new interface driver snd-usb-audio [ 18.810611] Bluetooth: Core ver 2.15 [ 18.810681] NET: Registered protocol family 31 [ 18.810683] Bluetooth: HCI device and connection manager initialized [ 18.810687] Bluetooth: HCI socket layer initialized [ 19.241327] Bluetooth: L2CAP ver 2.14 [ 19.241331] Bluetooth: L2CAP socket layer initialized [ 19.436032] Bluetooth: RFCOMM TTY layer initialized [ 19.436039] Bluetooth: RFCOMM socket layer initialized [ 19.436042] Bluetooth: RFCOMM ver 1.11 [ 19.436236] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.436239] Bluetooth: BNEP filters: protocol multicast [ 19.504566] Bridge firewalling registered [ 20.273025] Bluetooth: SCO (Voice Link) ver 0.6 [ 20.273028] Bluetooth: SCO socket layer initialized [ 22.876848] lp0: using parport0 (interrupt-driven). [ 23.027651] ppdev: user-space parallel port driver [ 25.445287] [drm] nouveau 0000:00:05.0: Allocating FIFO number 1 [ 25.445794] [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 1 [ 27.690580] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (2 cpu cores) (version 2.20.00) [ 27.690600] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 27.690601] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 30.012255] vboxdrv: Found 2 processor cores. [ 30.012857] vboxdrv: fAsync=1 offMin=0x780a5 offMax=0x780a5 [ 30.012924] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 30.012927] vboxdrv: Successfully loaded version 4.1.18 (interface 0x00190000). [ 30.358557] vboxpci: IOMMU not found (not compiled) [ 30.437014] eth0: no IPv6 routers present [ 72.424719] kjournald starting. Commit interval 5 seconds [ 72.424735] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 72.426039] EXT3 FS on sdb1, internal journal [ 72.426049] EXT3-fs: mounted filesystem with ordered data mode. [ 232.081024] cx88xx: `' invalid for parameter `card' [ 784.440593] cx88xx: `' invalid for parameter `card' [ 807.939001] cx88xx: `' invalid for parameter `card' ** Model information not available ** Loaded modules: Module Size Used by pci_stub 889 1 vboxpci 11533 0 vboxnetadp 18075 0 vboxnetflt 13941 0 vboxdrv 164303 3 vboxpci,vboxnetadp,vboxnetflt cpufreq_conservative 4018 0 cpufreq_powersave 602 0 cpufreq_stats 1997 0 cpufreq_userspace 1480 0 ppdev 4058 0 lp 5570 0 sco 5885 2 bridge 33031 0 stp 996 1 bridge bnep 7452 2 rfcomm 25199 0 l2cap 21721 6 bnep,rfcomm crc16 1027 1 l2cap bluetooth 36319 6 sco,bnep,rfcomm,l2cap rfkill 10264 2 bluetooth binfmt_misc 4907 1 fuse 44272 1 snd_usb_audio 50670 0 joydev 6739 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28016 0 hid 50909 1 usbhid loop 9769 0 firewire_sbp2 9647 0 snd_hda_codec_analog 45530 1 snd_hda_intel 16823 1 snd_wavefront 24702 0 snd_cs4236 21379 0 snd_wss_lib 16653 2 snd_wavefront,snd_cs4236 snd_hda_codec 46062 2 snd_hda_codec_analog,snd_hda_intel snd_opl3_lib 6022 2 snd_wavefront,snd_cs4236 snd_mpu401 3604 0 snd_mpu401_uart 4067 3 snd_wavefront,snd_cs4236,snd_mpu401 snd_seq_midi 3576 0 snd_rawmidi 12513 4 snd_usb_lib,snd_wavefront,snd_mpu401_uart,snd_seq_midi ir_common 22187 0 tveeprom 9393 0 snd_hwdep 4054 4 snd_usb_audio,snd_wavefront,snd_hda_codec,snd_opl3_lib nouveau 314888 2 snd_seq_midi_event 3684 1 snd_seq_midi ttm 33502 1 nouveau v4l2_common 9820 0 drm_kms_helper 18569 1 nouveau snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event snd_pcm_oss 28671 0 snd_mixer_oss 10461 1 snd_pcm_oss snd_pcm 47222 6 snd_usb_audio,snd_hda_intel,snd_cs4236,snd_wss_lib,snd_hda_codec,snd_pcm_oss videodev 25637 1 v4l2_common v4l1_compat 10250 1 videodev drm 112053 4 nouveau,ttm,drm_kms_helper snd_timer 12270 4 snd_wss_lib,snd_opl3_lib,snd_seq,snd_pcm snd_seq_device 3673 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq ns558 1599 0 videobuf_dma_sg 7203 0 k8temp 2551 0 i2c_algo_bit 3493 1 nouveau psmouse 44837 0 snd_page_alloc 5045 3 snd_hda_intel,snd_wss_lib,snd_pcm gameport 6061 2 ns558 snd 34415 20 snd_usb_audio,snd_hda_codec_analog,snd_hda_intel,snd_wavefront,snd_cs4236,snd_wss_lib,snd_hda_codec,snd_opl3_lib,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_hwdep,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_seq_device pcspkr 1207 0 videobuf_core 10476 1 videobuf_dma_sg btcx_risc 2499 0 button 3598 1 nouveau parport_pc 15799 1 parport 22554 3 ppdev,lp,parport_pc i2c_nforce2 4464 0 asus_atk0110 6770 0 i2c_core 12787 8 tveeprom,nouveau,v4l2_common,drm_kms_helper,videodev,drm,i2c_algo_bit,i2c_nforce2 evdev 5609 9 soundcore 3450 1 snd serio_raw 2916 0 processor 26327 0 ext3 94396 4 jbd 32401 1 ext3 mbcache 3762 1 ext3 sg 19937 0 sr_mod 10770 0 sd_mod 26013 7 cdrom 26435 1 sr_mod crc_t10dif 1012 1 sd_mod usb_storage 31033 1 ata_generic 2247 0 ohci_hcd 16999 0 fan 2586 0 firewire_ohci 16725 0 firewire_core 31243 2 firewire_sbp2,firewire_ohci pata_amd 6625 4 sata_nv 15398 0 floppy 40923 0 thermal 9206 0 crc_itu_t 1035 1 firewire_core thermal_sys 9378 3 processor,fan,thermal ehci_hcd 28689 0 forcedeth 40785 0 libata 115869 3 ata_generic,pata_amd,sata_nv scsi_mod 105001 6 firewire_sbp2,sg,sr_mod,sd_mod,usb_storage,libata usbcore 99321 7 snd_usb_audio,snd_usb_lib,usbhid,usb_storage,ohci_hcd,ehci_hcd nls_base 4541 1 usbcore ** PCI devices: 00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- 00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:05.0 VGA compatible controller [0300]: nVidia Corporation C51PV [GeForce 6150] [10de:0240] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM [1043:81cd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at f0000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau 00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 4: I/O ports at 4c00 [size=64] Region 5: I/O ports at 4c40 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus 00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a2) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a2) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at f400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_amd 00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at e000 [size=16] Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv 00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:81c0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at 09e0 [size=8] Region 1: I/O ports at 0be0 [size=4] Region 2: I/O ports at 0960 [size=8] Region 3: I/O ports at 0b60 [size=4] Region 4: I/O ports at cc00 [size=16] Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv 00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=128 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: fde00000-fdefffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81cb] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:816a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c800 [size=8] Capabilities: <access denied> Kernel driver in use: forcedeth 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard [1043:808b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fbff8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 01:09.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05) Subsystem: Avermedia Technologies Inc Device [1461:001b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 255 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> ** USB devices: Bus 002 Device 014: ID 046d:0a12 Logitech, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 1058:1100 Western Digital Technologies, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub-- System Information: Debian Release: 6.0.5 APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-45 Linux image base package ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: ii firmware-linux-free 2.6.32-45 Binary firmware for various driver ii libc6-i686 2.11.3-3 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686: -- , Prof. dr hab. Janusz S. Bien - Uniwersytet Warszawski (Katedra Lingwistyki Formalnej) Prof. Janusz S. Bien - University of Warsaw (Formal Linguistics Department) jsbien@uw.edu.pl, jsbien@mimuw.edu.pl, http://fleksem.klf.uw.edu.pl/~jsbien/
--- End Message ---
--- Begin Message ---
- To: 679540-done@bugs.debian.org
- Subject: Re: unable to reproduce (was: Bug#679540: linux-image-2.6.32-5-686: cx88xx doesn't accept a legal parameter)
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 22 Jul 2012 07:18:35 +0100
- Message-id: <1342937915.5132.8.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <87hattdufk.fsf@mimuw.edu.pl>
- References: <87fw9e6sgx.fsf@mimuw.edu.pl> <87hattdufk.fsf@mimuw.edu.pl>
On Sat, 2012-06-30 at 11:23 +0200, Janusz S. Bień wrote: > On Fri, 29 Jun 2012 jsbien@mimuw.edu.pl (Janusz S. Bień) wrote: > > > Package: linux-2.6 > > Version: 2.6.32-45 > > Severity: normal > > File: /lib/modules/2.6.32-5-686/kernel/drivers/media/video/cx88/cx88xx.ko > > > > I've just installed a second hand AverMedia Studio 303 which works under > > Windows. However > > > > modprobe cx88xx card=6 > > > > results in > > > > FATAL: Error inserting cx88xx (/lib/modules/2.6.32-5-686/kernel/drivers/media/video/cx88/cx88xx.ko): Invalid argument > > > > and > > > > [ 3771.091382] cx88xx: `' invalid for parameter `card' > > Today it simply works... Can somebody explain this? Perhaps you accidentally typed some extra invisible punctuation in the command the first time?? Anyway, since this is not reproducible, I think the report should be closed. Ben. -- Ben Hutchings 73.46% of all statistics are made up.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---