Bug#680747: [linux-image-3.2.0-2-amd64] Kernel crashes
Package: linux-image-3.2.0-2-amd64
Version: 3.2.20-1
Severity: important
--- Please enter the report below this line. ---
Dear Maintainers,
my system crashes time by time, but it was not possible to reproduce the
crashes or to find any obvious reason.
I tried different things before, but the behaviour did not change:
- I tested the memory with memtest86+, but no errors were found.
- I removed all additional cards, except video (Soundblaster
Live!/emu10k1, Adaptec 29160)
- moved from proprietary nvidia-drivers to nouveau
I attached two files:
reportbug-ng-linux-image-[...].txt, with general informations about my
machine
and netconsole.log, where all kernel-messages have been logged within
the last ~24 hours
in netconsole.log you will find these four crashes, I don't know if they
are related or not...:
Line 759:
[ 2605.144649] update-notifier[14853] general protection ip:7f9485bf2dbd
sp:7ffff5256930 error:0 in libc-2.13.so[7f9485b7d000+17d000]
Line 1455:
[ 1732.146071] general protection fault: 0000 [#1] SMP [ 0.000000]
Initializing cgroup subsys cpuset
Line 2160-2165:
[ 103.905641] ------------[ cut here ]------------
[ 103.905972] kernel BUG at
/build/buildd-linux_3.2.20-1-amd64-lTzScn/linux-3.2.20/fs/dcache.c:474!
[ 103.906281] invalid opcode: 0000 [#1] SMP
[ 103.906582] CPU 1
[ 103.906587] Modules linked in: cpufreq_stats cpufreq_userspace
cpufreq_conservative ppdev lp bnep rfcomm bluetooth[ 0.000000]
Initializing cgroup subsys cpuset
Line 2816-2822:
[ 1616.181418]
/build/buildd-linux_3.2.20-1-amd64-lTzScn/linux-3.2.20/mm/memory.c:408:
bad pud ffff8800d94bcf78(00000000d0211031).
[ 1616.181440]
/build/buildd-linux_3.2.20-1-amd64-lTzScn/linux-3.2.20/mm/memory.c:402:
bad pgd ffff8800d016f7f8(00000000d02de073).
[ 1616.181500] ------------[ cut here ]------------
[ 1616.181786] kernel BUG at
/build/buildd-linux_3.2.20-1-amd64-lTzScn/linux-3.2.20/mm/mmap.c:2274!
[ 1616.181801] invalid opcode: 0000 [#1] SMP
[ 1616.181815] CPU 0
[ 1616.181821] Modules linked in: snd_hrtimer ip6table_filter ip6_tables
iptable_filter ip_tables x_tables(P) cpufreq_stats[ 0.000000]
Initializing cgroup subsys cpuset
linux-image-3.2.0-2-amd64-dbg has been installed for crashes in the future.
But the system is up for 19.5 hours now without crashing, and I'm
waiting for the next crash... :-)
thanks,
Christoph Mühlmann
--- System information. ---
Architecture: amd64
Kernel: Linux 3.2.0-2-amd64
Debian Release: wheezy/sid
500 unstable qgis.org
500 testing-proposed-updates ftp.de.debian.org
500 testing www.debian-multimedia.org
500 testing security.debian.org
500 testing ftp.de.debian.org
500 stable dl.google.com
--- Package information. ---
Depends (Version) | Installed
====================================-+-============
kmod | 8-2
OR module-init-tools | 8-2
linux-base (>= 3~) | 3.5
initramfs-tools (>= 0.99~) | 0.106
OR linux-initramfs-tool |
Package Status (Version) | Installed
=====================================-+-===========
firmware-atheros | 0.36
firmware-bnx2 | 0.36
firmware-bnx2x | 0.36
firmware-brcm80211 | 0.36
firmware-intelwimax | 0.36
firmware-ipw2x00 | 0.36
firmware-ivtv | 0.36
firmware-iwlwifi | 0.36
firmware-libertas | 0.36
firmware-linux | 0.36
firmware-linux-nonfree | 0.36
firmware-myricom | 0.36
firmware-netxen | 0.36
firmware-qlogic | 0.36
firmware-ralink | 0.36
firmware-realtek | 0.36
xen-hypervisor |
Recommends (Version) | Installed
==================================-+-===========
firmware-linux-free (>= 3~) | 3.1
Suggests (Version) | Installed
================================-+-===============
linux-doc-3.2 | 3.2.20-1
grub-pc | 1.99-22.1
OR extlinux |
OR lilo (>= 22.8-8.2~) |
--- Output from package bug script ---
** Version:
Linux version 3.2.0-2-amd64 (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 17:24:18 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
** Not tainted
** Kernel log:
[ 21.334507] sr 6:0:0:0: Attached scsi generic sg5 type 5
[ 21.457721] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[ 21.458022] powernow-k8: fid 0xe (2200 MHz), vid 0xc
[ 21.458253] powernow-k8: fid 0xc (2000 MHz), vid 0xe
[ 21.458477] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 21.458696] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 21.526767] usbcore: registered new interface driver usblp
[ 21.556662] Bridge firewalling registered
[ 21.638113] Driver for 1-wire Dallas network protocol.
[ 21.667935] it87: Found IT8716F chip at 0x290, revision 0
[ 21.668484] it87: VID is disabled (pins used for GPIO)
[ 21.669047] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x295-0x296]
[ 21.669533] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.831448] netconsole: local port 6666
[ 21.831987] netconsole: local IP 172.16.0.3
[ 21.832514] netconsole: interface 'eth1'
[ 21.833001] netconsole: remote port 6666
[ 21.833481] netconsole: remote IP 172.16.0.13
[ 21.833958] netconsole: remote ethernet address 00:1c:23:85:ba:39
[ 21.834437] netconsole: device eth1 not up yet, forcing it
[ 21.836465] forcedeth 0000:00:10.0: irq 46 for MSI/MSI-X
[ 21.839811] netconsole: carrier detect appears untrustworthy, waiting 4 seconds
[ 25.849267] console [netcon0] enabled
[ 25.849842] netconsole: network logging started
[ 27.486605] scsi_verify_blk_ioctl: 606 callbacks suppressed
[ 27.487204] mdadm: sending ioctl 1261 to a partition!
[ 27.487753] mdadm: sending ioctl 1261 to a partition!
[ 28.023058] mdadm: sending ioctl 1261 to a partition!
[ 28.023671] mdadm: sending ioctl 1261 to a partition!
[ 28.136389] mdadm: sending ioctl 1261 to a partition!
[ 28.137012] mdadm: sending ioctl 1261 to a partition!
[ 28.355480] md: resync of RAID array md3
[ 28.356130] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 28.356718] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 28.357316] md: using 128k window, over a total of 1953510841k.
[ 28.515777] mdadm: sending ioctl 1261 to a partition!
[ 28.516509] mdadm: sending ioctl 1261 to a partition!
[ 28.559754] mdadm: sending ioctl 1261 to a partition!
[ 28.560516] mdadm: sending ioctl 1261 to a partition!
[ 28.795289] kjournald starting. Commit interval 5 seconds
[ 28.811559] EXT3-fs (md0): using internal journal
[ 28.812260] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 28.813711] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 28.814426] REISERFS (device md2): using ordered data mode
[ 28.815055] reiserfs: using flush barriers
[ 28.827101] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 28.830847] REISERFS (device md2): checking transaction log (md2)
[ 28.927092] REISERFS (device md2): Using r5 hash to sort names
[ 28.960082] REISERFS (device md3): found reiserfs format "3.6" with standard journal
[ 28.960884] REISERFS (device md3): using ordered data mode
[ 28.961534] reiserfs: using flush barriers
[ 28.963355] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 28.967047] REISERFS (device md3): checking transaction log (md3)
[ 29.044084] REISERFS (device md3): Using r5 hash to sort names
[ 31.587099] RPC: Registered named UNIX socket transport module.
[ 31.587946] RPC: Registered udp transport module.
[ 31.588668] RPC: Registered tcp transport module.
[ 31.589460] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 31.685078] FS-Cache: Loaded
[ 31.743118] FS-Cache: Netfs 'nfs' registered for caching
[ 31.769897] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 32.304038] eth1: no IPv6 routers present
[ 35.427397] fuse init (API version 7.17)
[ 39.262157] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X
[ 41.311436] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 43.835917] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 43.856519] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 43.906366] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 43.906382] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 49.808044] eth2: no IPv6 routers present
[ 52.169224] Bluetooth: Core ver 2.16
[ 52.169319] NET: Registered protocol family 31
[ 52.169328] Bluetooth: HCI device and connection manager initialized
[ 52.169347] Bluetooth: HCI socket layer initialized
[ 52.169354] Bluetooth: L2CAP socket layer initialized
[ 52.169756] Bluetooth: SCO socket layer initialized
[ 52.335567] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 52.335592] Bluetooth: BNEP filters: protocol multicast
[ 52.516674] Bluetooth: RFCOMM TTY layer initialized
[ 52.516739] Bluetooth: RFCOMM socket layer initialized
[ 52.516747] Bluetooth: RFCOMM ver 1.11
[ 59.997467] lp0: using parport0 (interrupt-driven).
[ 60.065884] ppdev: user-space parallel port driver
[ 101.741296] postgres (6222): /proc/6222/oom_adj is deprecated, please use /proc/6222/oom_score_adj instead.
[ 109.014991] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 109.879052] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 110.682594] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 110.682649] NFSD: starting 90-second grace period
[ 737.278676] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1701.575255] md: md1: resync done.
[ 1701.625989] RAID1 conf printout:
[ 1701.626016] --- wd:2 rd:2
[ 1701.626043] disk 0, wo:0, o:1, dev:sda3
[ 1701.626052] disk 1, wo:0, o:1, dev:sdb3
[24814.861219] md: md3: resync done.
[24814.992358] RAID1 conf printout:
[24814.992396] --- wd:2 rd:2
[24814.992424] disk 0, wo:0, o:1, dev:sdc1
[24814.992432] disk 1, wo:0, o:1, dev:sdd1
[67988.684418] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies, LTD
bios_version: ASUS M2N32 WS Pro ACPI BIOS Revision 2001
board_vendor: ASUSTeK Computer INC.
board_name: M2N32 WS Professional
board_version: 1.XX
** Loaded modules:
snd_hrtimer
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
ppdev
lp
rfcomm
bnep
bluetooth
rfkill
crc16
binfmt_misc
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext3
mbcache
jbd
netconsole
configfs
hwmon_vid
wire
cn
bridge
stp
usblp
sata_mv
powernow_k8
mperf
ahci
libahci
cpufreq_powersave
sg
aic79xx
aic7xxx
scsi_transport_spi
msr
cpuid
aes_x86_64
aes_generic
firewire_sbp2
loop
dm_crypt
snd_hda_codec_analog
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
i2c_nforce2
parport_pc
edac_mce_amd
parport
edac_core
shpchp
psmouse
serio_raw
k8temp
snd_seq_device
snd_timer
asus_atk0110
processor
pcspkr
snd
soundcore
evdev
reiserfs
raid1
md_mod
dm_mirror
dm_region_hash
dm_log
dm_mod
vga16fb
vgastate
sr_mod
cdrom
usbhid
hid
sd_mod
crc_t10dif
ata_generic
nouveau
pata_amd
sata_nv
libata
firewire_ohci
ohci_hcd
fan
thermal
video
firewire_core
mxm_wmi
wmi
i2c_algo_bit
crc_itu_t
drm_kms_helper
ttm
button
drm
ehci_hcd
usbcore
scsi_mod
forcedeth
i2c_core
thermal_sys
usb_common
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 17:24:18 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32 WS Professional, BIOS ASUS M2N32 WS Pro ACPI BIOS Revision 2001 05/05/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6040] f6040
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfeb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeaa000-dfeb0000
[ 0.000000] RAMDISK: 36152000 - 370a1000
[ 0.000000] ACPI: RSDP 00000000000f7f20 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000dfeeb480 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000dfee3280 08189 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000dfeb0000 00040
[ 0.000000] ACPI: TCPA 00000000dfeeb6c0 00032 (v01 HTC HTCACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000dfeeb740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000dfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000dfeeb5c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031994
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ d4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000
[ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
[ 0.000000] Memory: 3976876k/4718592k available (3407k kernel code, 526084k absent, 215632k reserved, 3326k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2209.872 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.74 BogoMIPS (lpj=8839488)
[ 0.008107] pid_max: default: 32768 minimum: 301
[ 0.008198] Security Framework initialized
[ 0.008234] AppArmor: AppArmor disabled by boot time parameter
[ 0.012393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014984] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.016369] Mount-cache hash table entries: 256
[ 0.016570] Initializing cgroup subsys cpuacct
[ 0.016607] Initializing cgroup subsys memory
[ 0.016655] Initializing cgroup subsys devices
[ 0.016689] Initializing cgroup subsys freezer
[ 0.016724] Initializing cgroup subsys net_cls
[ 0.016757] Initializing cgroup subsys blkio
[ 0.016799] Initializing cgroup subsys perf_event
[ 0.016864] tseg: 00dff00000
[ 0.016897] CPU: Physical Processor ID: 0
[ 0.016929] CPU: Processor Core ID: 0
[ 0.016962] mce: CPU supports 5 MCE banks
[ 0.017003] using AMD E400 aware idle routine
[ 0.017367] ACPI: Core revision 20110623
[ 0.024491] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.064231] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 9a000
[ 0.156149] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156205] Brought up 2 CPUs
[ 0.156238] Total of 2 processors activated (8840.14 BogoMIPS).
[ 0.156778] devtmpfs: initialized
[ 0.160265] PM: Registering ACPI NVS region at dfeb0000 (208896 bytes)
[ 0.160265] print_constraints: dummy:
[ 0.160360] NET: Registered protocol family 16
[ 0.160520] node 0 link 0: io port [a000, ffff]
[ 0.160555] TOM: 00000000e0000000 aka 3584M
[ 0.160589] node 0 link 0: mmio [a0000, bffff]
[ 0.160644] node 0 link 0: mmio [e0000000, efffffff]
[ 0.160699] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.160755] node 0 link 0: mmio [f0000000, f09fffff]
[ 0.160810] TOM2: 0000000120000000 aka 4608M
[ 0.160843] bus: [00, 09] on node 0 link 0
[ 0.160878] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.160911] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.160946] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff]
[ 0.160980] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[ 0.161014] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[ 0.161057] ACPI: bus type pci registered
[ 0.161170] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.161216] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.168101] PCI: Using configuration type 1 for base access
[ 0.168983] bio: create slab <bio-0> at 0
[ 0.168983] ACPI: Added _OSI(Module Device)
[ 0.168983] ACPI: Added _OSI(Processor Device)
[ 0.168983] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.168983] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169415] ACPI: EC: Look up EC in DSDT
[ 0.178289] ACPI: Interpreter enabled
[ 0.178330] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.178495] ACPI: Using IOAPIC for interrupt routing
[ 0.186363] ACPI: No dock devices found.
[ 0.186400] HEST: Table not found.
[ 0.186435] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.186737] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.186773] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.186809] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.186852] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.186895] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470c]
[ 0.186931] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.186974] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.187018] pci_root PNP0A08:00: host bridge window expanded to [io 0x0d00-0xffff]; [io 0x4700-0x470c] ignored
[ 0.187077] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500
[ 0.187153] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.187216] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.187285] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.187355] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.187424] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.187489] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.187549] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.187623] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.187681] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187718] pci 0000:00:04.0: PME# disabled
[ 0.187781] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500
[ 0.187996] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601
[ 0.188041] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.188094] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05
[ 0.188156] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.188194] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.188259] pci 0000:00:09.1: PME# supported from D3hot D3cold
[ 0.188296] pci 0000:00:09.1: PME# disabled
[ 0.188349] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03
[ 0.188391] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.188460] pci 0000:00:0a.0: supports D1 D2
[ 0.188493] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188530] pci 0000:00:0a.0: PME# disabled
[ 0.188576] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03
[ 0.188618] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.188687] pci 0000:00:0a.1: supports D1 D2
[ 0.188721] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188757] pci 0000:00:0a.1: PME# disabled
[ 0.188808] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101
[ 0.188860] pci 0000:00:0c.0: reg 20: [io 0xf400-0xf40f]
[ 0.188923] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101
[ 0.188966] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7]
[ 0.189003] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.189040] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977]
[ 0.189078] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.189115] pci 0000:00:0d.0: reg 20: [io 0xe000-0xe00f]
[ 0.279963] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.279963] pci 0000:03:00.1: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.279963] pci 0000:03:00.1: setting latency timer to 64
[ 0.279963] pci 0000:00:14.0: setting latency timer to 64
[ 0.279963] pci 0000:00:15.0: setting latency timer to 64
[ 0.279963] pci 0000:00:16.0: setting latency timer to 64
[ 0.279963] pci 0000:00:17.0: setting latency timer to 64
[ 0.279963] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.279963] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279963] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.279963] pci_bus 0000:00: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.279963] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.279963] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279963] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.279963] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.279963] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279963] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.279963] pci_bus 0000:02: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.279963] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.279963] NET: Registered protocol family 2
[ 0.279963] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.285303] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.285928] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.285964] TCP reno registered
[ 0.286097] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.286312] NET: Registered protocol family 1
[ 0.286689] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.286739] pci 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 0.356039] pci 0000:00:0a.0: PCI INT A disabled
[ 0.356351] pci 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.356421] pci 0000:00:0a.1: PCI INT B disabled
[ 0.356582] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.356659] pci 0000:00:0d.2: Enabling HT MSI Mapping
[ 0.356737] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.356909] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.357006] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.357106] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 0.357211] pci 0000:00:14.0: Enabling HT MSI Mapping
[ 0.357321] pci 0000:00:15.0: Enabling HT MSI Mapping
[ 0.357558] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.357610] pci 0000:01:00.0: Boot video device
[ 0.357651] PCI: CLS 32 bytes, default 64
[ 0.753918] Freeing initrd memory: 15676k freed
[ 0.764901] PCI-DMA: Disabling AGP.
[ 0.765031] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 0.765065] PCI-DMA: using GART IOMMU.
[ 0.769516] audit: initializing netlink socket (disabled)
[ 0.769569] type=2000 audit(1341667189.768:1): initialized
[ 0.797960] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.823971] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.824118] msgmni has been set to 7926
[ 0.824458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.824505] io scheduler noop registered
[ 0.824538] io scheduler deadline registered
[ 0.824812] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.824874] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.825012] pcieport 0000:00:12.0: setting latency timer to 64
[ 0.825193] pcieport 0000:00:14.0: setting latency timer to 64
[ 0.825250] pcieport 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.825371] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.825549] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.825606] pcieport 0000:00:16.0: irq 44 for MSI/MSI-X
[ 0.825728] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.826021] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.826090] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.826125] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.826729] GHES: HEST is not enabled!
[ 0.826837] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.924570] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.940267] Linux agpgart interface v0.103
[ 0.940896] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.940936] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.941152] mousedev: PS/2 mouse device common for all mice
[ 0.941243] rtc_cmos 00:04: RTC can wake from S4
[ 0.941491] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.941537] cpuidle: using governor ladder
[ 0.941824] TCP cubic registered
[ 0.941923] NET: Registered protocol family 10
[ 0.942543] NET: Registered protocol family 17
[ 0.942579] Registering the dns_resolver key type
[ 0.942815] PM: Hibernation image not present or could not be loaded.
[ 1.061411] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.061734] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
[ 1.061781] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.067624] usbcore: registered new interface driver hub
[ 1.072800] usbcore: registered new device driver usb
[ 1.073448] libata version 3.00 loaded.
[ 1.081165] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.081216] ACPI: Power Button [PWRB]
[ 1.081401] ACPI: Power Button [PWRF]
[ 1.090737] [drm] Initialized drm 1.1.0 20060810
[ 1.108318] wmi: Mapper loaded
[ 1.114353] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 1.114454] ACPI: [Package] has zero elements (ffff88011707b180)
[ 1.114741] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.117972] ACPI: Thermal Zone [THRM] (40 C)
[ 1.131326] ACPI: Fan [FAN] (on)
[ 1.135230] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1.160047] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 1.160136] nouveau 0000:01:00.0: setting latency timer to 64
[ 1.162431] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200b1)
[ 1.164179] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 1.211834] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1.211907] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[ 1.211943] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[ 1.211987] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 1.212046] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 1.212119] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 1.212154] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0c011312 00c00000
[ 1.212229] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 1.212266] [drm] nouveau 0000:01:00.0: 0: 0x00000030: type 0x30 idx 0 tag 0xff
[ 1.212354] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 1.212398] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 1.212443] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 1.212790] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD497
[ 1.224956] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDB92
[ 1.228180] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF22
[ 1.229020] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.254159] [drm] nouveau 0000:01:00.0: 0: core 400MHz shader 400MHz memory 333MHz voltage 1100mV fanspeed 100%
[ 1.254210] [drm] nouveau 0000:01:00.0: c: core 351MHz shader 351MHz memory 265MHz
[ 1.254433] [TTM] Zone kernel: Available graphics memory: 2030216 kiB.
[ 1.254515] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 1.257492] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.308551] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.308589] [drm] No driver support for vblank timestamp query.
[ 1.308635] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 1.308734] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[ 1.308783] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 1.308827] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
[ 1.496900] fbcon: nouveaufb (fb0) is primary device
[ 1.510185] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 1.559803] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 1.560715] Console: switching to colour frame buffer device 128x48
[ 1.561626] drm: registered panic notifier
[ 1.561637] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 1.584760] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:06:5d
[ 1.584782] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.585104] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20
[ 1.585118] forcedeth 0000:00:11.0: setting latency timer to 64
[ 2.108766] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:08:8e
[ 2.108782] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.108886] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 2.108942] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 2.108982] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 2.109030] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported
[ 2.109064] ehci_hcd 0000:00:0a.1: irq 22, io mem 0xfe02e000
[ 2.120036] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 2.120404] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.120711] usb usb1: Product: EHCI Host Controller
[ 2.121354] usb usb1: SerialNumber: 0000:00:0a.1
[ 2.121946] hub 1-0:1.0: USB hub found
[ 2.122247] hub 1-0:1.0: 10 ports detected
[ 2.123463] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 2.123766] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 2.124851] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 2.125590] scsi0 : sata_nv
[ 2.126458] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 2.126753] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 2.127318] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 2.127896] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 2.128626] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 2.130220] scsi3 : sata_nv
[ 2.130642] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 2.130916] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 2.131729] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.131999] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 2.132711] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 2.133775] scsi5 : sata_nv
[ 2.134190] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 21
[ 2.134458] ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 21
[ 2.135303] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 2.135971] scsi6 : pata_amd
[ 2.137101] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.137358] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.137886] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 2.138423] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 2.138687] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 2.194038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.194289] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.194534] usb usb2: Product: OHCI Host Controller
[ 2.195025] usb usb2: SerialNumber: 0000:00:0a.0
[ 2.195440] hub 2-0:1.0: USB hub found
[ 2.195693] hub 2-0:1.0: 10 ports detected
[ 2.300635] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 2.316313] ata7.00: configured for UDMA/33
[ 2.544028] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 2.592034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.600284] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 2.600533] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.604344] ata3.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 2.608245] ata1.00: configured for UDMA/133
[ 2.608669] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 2.676476] usb 1-3: New USB device found, idVendor=050d, idProduct=0234
[ 2.676739] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.677289] hub 1-3:1.0: USB hub found
[ 2.788032] usb 1-10: new high-speed USB device number 5 using ehci_hcd
[ 2.935350] usb 1-10: New USB device found, idVendor=0aec, idProduct=3260
[ 2.935611] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.935867] usb 1-10: Product: USB Storage Device
[ 2.936133] usb 1-10: Manufacturer: GENERIC
[ 2.936380] usb 1-10: SerialNumber: 200504221023394LD
[ 2.939525] usbcore: registered new interface driver uas
[ 3.076040] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.084262] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 3.084531] ata2.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.092249] ata2.00: configured for UDMA/133
[ 3.092655] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 3.093268] scsi 2:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.240028] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[ 3.454051] usb 2-1: New USB device found, idVendor=046d, idProduct=c00e
[ 3.454313] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.454564] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 3.454816] usb 2-1: Manufacturer: Logitech
[ 3.560036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.568357] ata4.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 3.568609] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.584356] ata4.00: configured for UDMA/133
[ 3.584776] scsi 3:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.588200] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.588248] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.588299] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.588302] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.588324] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.588672] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.588719] sd 3:0:0:0: [sdd] Write Protect is off
[ 3.588722] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.588743] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.590971] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.590988] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.590991] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.591011] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.592799] sd 0:0:0:0: [sda] Write Protect is off
[ 3.593074] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.593367] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.609279] sdd: sdd1
[ 3.609636] sdc: sdc1
[ 3.610128] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.610292] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.620736] sdb: sdb1 sdb2 sdb3 sdb4
[ 3.621408] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.647983] sda: sda1 sda2 sda3 sda4
[ 3.648690] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.760029] usb 2-2: new low-speed USB device number 3 using ohci_hcd
[ 3.978053] usb 2-2: New USB device found, idVendor=046d, idProduct=c30f
[ 3.978331] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.978591] usb 2-2: Product: Logitech USB Keyboard
[ 3.978846] usb 2-2: Manufacturer: Logitech
[ 4.052041] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.060168] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
[ 4.076161] ata6.00: configured for UDMA/100
[ 4.077631] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB04 PQ: 0 ANSI: 5
[ 4.083393] scsi 6:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
[ 4.083845] ata8: port disabled--ignoring
[ 4.085575] Initializing USB Mass Storage driver...
[ 4.089382] scsi8 : usb-storage 1-10:1.0
[ 4.089794] usbcore: registered new interface driver usb-storage
[ 4.090063] USB Mass Storage support registered.
[ 4.106595] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.106896] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.107348] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.111241] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.111734] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 4.115374] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input2
[ 4.115899] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-1/input0
[ 4.123390] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.0/input/input3
[ 4.123911] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:0a.0-2/input0
[ 4.139187] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.1/input/input4
[ 4.139646] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:0a.0-2/input1
[ 4.140314] usbcore: registered new interface driver usbhid
[ 4.140611] usbhid: USB HID core driver
[ 4.478095] vga16fb: initializing
[ 4.478958] vga16fb: mapped to 0xffff8800000a0000
[ 4.479371] fb1: VGA16 VGA frame buffer device
[ 4.485880] device-mapper: uevent: version 1.0.3
[ 4.486444] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.776339] md: raid1 personality registered for level 1
[ 4.794876] mdadm: sending ioctl 800c0910 to a partition!
[ 4.795185] mdadm: sending ioctl 800c0910 to a partition!
[ 4.795474] mdadm: sending ioctl 1261 to a partition!
[ 4.795748] mdadm: sending ioctl 1261 to a partition!
[ 4.798019] mdadm: sending ioctl 1261 to a partition!
[ 4.798293] mdadm: sending ioctl 1261 to a partition!
[ 4.801838] mdadm: sending ioctl 1261 to a partition!
[ 4.802106] mdadm: sending ioctl 1261 to a partition!
[ 4.802548] mdadm: sending ioctl 1261 to a partition!
[ 4.802810] mdadm: sending ioctl 1261 to a partition!
[ 4.812398] md: md0 stopped.
[ 4.815686] md: bind<sdb1>
[ 4.816284] md: bind<sda1>
[ 4.818752] bio: create slab <bio-1> at 1
[ 4.819140] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.819455] md0: detected capacity change from 0 to 98566144
[ 4.822229] md0: unknown partition table
[ 4.849004] md: md1 stopped.
[ 4.850669] md: bind<sdb3>
[ 4.851149] md: bind<sda3>
[ 4.855111] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.855410] md1: detected capacity change from 0 to 79998943232
[ 4.857531] md1: unknown partition table
[ 4.902172] md: md2 stopped.
[ 4.905124] md: bind<sdb4>
[ 4.934174] md: bind<sda4>
[ 4.936127] md/raid1:md2: active with 2 out of 2 mirrors
[ 4.936419] md2: detected capacity change from 0 to 237973733376
[ 4.938518] md2: unknown partition table
[ 4.983439] md: md3 stopped.
[ 4.984942] md: bind<sdd1>
[ 4.985407] md: bind<sdc1>
[ 4.988156] md/raid1:md3: not clean -- starting background reconstruction
[ 4.988404] md/raid1:md3: active with 2 out of 2 mirrors
[ 4.988656] md3: detected capacity change from 0 to 2000395101184
[ 4.993450] md3: unknown partition table
[ 5.093127] scsi 8:0:0:0: Direct-Access GENERIC USB Storage-SMC I19B PQ: 0 ANSI: 0 CCS
[ 5.097489] scsi 8:0:0:1: Direct-Access GENERIC USB Storage-CFC I19B PQ: 0 ANSI: 0 CCS
[ 5.101739] scsi 8:0:0:2: Direct-Access GENERIC USB Storage-SDC I19B PQ: 0 ANSI: 0 CCS
[ 5.105986] scsi 8:0:0:3: Direct-Access GENERIC USB Storage-MSC I19B PQ: 0 ANSI: 0 CCS
[ 5.113498] sd 8:0:0:0: [sde] Attached SCSI removable disk
[ 5.117437] sd 8:0:0:1: [sdf] Attached SCSI removable disk
[ 5.118246] sd 8:0:0:2: [sdg] Attached SCSI removable disk
[ 5.121754] sd 8:0:0:3: [sdh] Attached SCSI removable disk
[ 5.139949] PM: Starting manual resume from disk
[ 5.143267] PM: Hibernation image partition 8:2 present
[ 5.143489] PM: Looking for hibernation image.
[ 5.144081] PM: Image not found (code -22)
[ 5.144284] PM: Hibernation image not present or could not be loaded.
[ 5.152845] REISERFS (device md1): found reiserfs format "3.6" with standard journal
[ 5.153082] REISERFS (device md1): using ordered data mode
[ 5.153302] reiserfs: using flush barriers
[ 5.166311] REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.167987] REISERFS (device md1): checking transaction log (md1)
[ 11.521335] REISERFS (device md1): replayed 628 transactions in 7 seconds
[ 11.902730] REISERFS (device md1): Using r5 hash to sort names
[ 14.106259] udevd[525]: starting version 175
[ 15.028211] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.064494] EDAC MC: Ver: 2.1.0
[ 15.067808] MCE: In-kernel MCE decoding enabled.
[ 15.074663] AMD64 EDAC driver v3.4.0
[ 15.075311] EDAC amd64: DRAM ECC disabled.
[ 15.075674] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 15.075676] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 15.075678] (Note that use of the override may cause unknown side effects.)
[ 15.112463] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 15.161189] scsi_verify_blk_ioctl: 276 callbacks suppressed
[ 15.161547] mdadm: sending ioctl 1261 to a partition!
[ 15.161871] mdadm: sending ioctl 1261 to a partition!
[ 15.163441] mdadm: sending ioctl 1261 to a partition!
[ 15.163780] mdadm: sending ioctl 1261 to a partition!
[ 15.164434] mdadm: sending ioctl 1261 to a partition!
[ 15.164779] mdadm: sending ioctl 1261 to a partition!
[ 15.269322] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 15.421544] ACPI: resource nForce2_smbus [io 0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
[ 15.421879] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.422259] i2c i2c-3: nForce2 SMBus adapter at 0x1c40
[ 15.424548] udevd[595]: renamed network interface eth1 to eth2
[ 15.448564] udevd[594]: renamed network interface eth0 to eth1
[ 15.553921] parport_pc 00:08: reported by Plug and Play ACPI
[ 15.554371] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 15.930971] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 15.931290] snd_hda_intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 15.931585] hda_intel: msi for device 1043:81f6 set to 0
[ 15.931944] snd_hda_intel 0000:00:0e.1: setting latency timer to 64
[ 16.399832] mdadm: sending ioctl 800c0910 to a partition!
[ 16.400247] mdadm: sending ioctl 800c0910 to a partition!
[ 16.401610] mdadm: sending ioctl 1261 to a partition!
[ 16.401927] mdadm: sending ioctl 1261 to a partition!
[ 16.780560] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/input/input6
[ 20.072861] Adding 1951892k swap on /dev/sda2. Priority:5 extents:1 across:1951892k
[ 20.119409] Adding 1951892k swap on /dev/sdb2. Priority:5 extents:1 across:1951892k
[ 20.488219] reiserfs: enabling write barrier flush mode
[ 20.504461] scsi_verify_blk_ioctl: 768 callbacks suppressed
[ 20.504771] mdadm: sending ioctl 1261 to a partition!
[ 20.505050] mdadm: sending ioctl 1261 to a partition!
[ 21.143257] loop: module loaded
[ 21.275115] microcode: CPU0: family 15 not supported
[ 21.488738] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.489400] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 21.489941] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 21.490483] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 21.491010] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 21.491592] sr 6:0:0:0: Attached scsi generic sg5 type 5
[ 21.491922] sd 8:0:0:0: Attached scsi generic sg6 type 0
[ 21.492932] sd 8:0:0:1: Attached scsi generic sg7 type 0
[ 21.493823] sd 8:0:0:2: Attached scsi generic sg8 type 0
[ 21.494711] sd 8:0:0:3: Attached scsi generic sg9 type 0
[ 21.607883] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[ 21.608236] powernow-k8: fid 0xe (2200 MHz), vid 0xc
[ 21.608497] powernow-k8: fid 0xc (2000 MHz), vid 0xe
[ 21.608745] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 21.608986] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 21.731424] usbcore: registered new interface driver usblp
[ 21.771284] Bridge firewalling registered
[ 21.861286] Driver for 1-wire Dallas network protocol.
[ 21.904849] it87: Found IT8716F chip at 0x290, revision 0
[ 21.905405] it87: VID is disabled (pins used for GPIO)
[ 21.905987] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x295-0x296]
[ 21.906505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.071160] netconsole: local port 6666
[ 22.071730] netconsole: local IP 172.16.0.3
[ 22.072288] netconsole: interface 'eth1'
[ 22.072820] netconsole: remote port 6666
[ 22.072824] netconsole: remote IP 172.16.0.13
[ 22.072828] netconsole: remote ethernet address 00:1c:23:85:ba:39
[ 22.072837] netconsole: device eth1 not up yet, forcing it
[ 22.074251] forcedeth 0000:00:10.0: irq 46 for MSI/MSI-X
[ 22.076806] netconsole: carrier detect appears untrustworthy, waiting 4 seconds
[ 26.085443] console [netcon0] enabled
[ 26.086012] netconsole: network logging started
[ 27.908466] mdadm: sending ioctl 1261 to a partition!
[ 27.909028] mdadm: sending ioctl 1261 to a partition!
[ 32.600037] eth1: no IPv6 routers present
[ 32.608585] mdadm: sending ioctl 1261 to a partition!
[ 32.608976] mdadm: sending ioctl 1261 to a partition!
[ 32.762786] mdadm: sending ioctl 1261 to a partition!
[ 32.763186] mdadm: sending ioctl 1261 to a partition!
[ 32.906225] md: resync of RAID array md3
[ 32.906678] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 32.907087] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 32.907510] md: using 128k window, over a total of 1953510841k.
[ 37.923844] mdadm: sending ioctl 1261 to a partition!
[ 37.924644] mdadm: sending ioctl 1261 to a partition!
[ 38.306871] kjournald starting. Commit interval 5 seconds
[ 38.323638] EXT3-fs (md0): using internal journal
[ 38.324043] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 38.328474] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 38.328926] REISERFS (device md2): using ordered data mode
[ 38.329316] reiserfs: using flush barriers
[ 38.337603] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 38.341086] REISERFS (device md2): checking transaction log (md2)
[ 38.455306] REISERFS (device md2): Using r5 hash to sort names
[ 38.488283] REISERFS (device md3): found reiserfs format "3.6" with standard journal
[ 38.488898] REISERFS (device md3): using ordered data mode
[ 38.489366] reiserfs: using flush barriers
[ 38.491075] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 38.494515] REISERFS (device md3): checking transaction log (md3)
[ 38.564978] REISERFS (device md3): Using r5 hash to sort names
[ 41.324422] RPC: Registered named UNIX socket transport module.
[ 41.325037] RPC: Registered udp transport module.
[ 41.325607] RPC: Registered tcp transport module.
[ 41.326167] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 41.384354] FS-Cache: Loaded
[ 41.438383] FS-Cache: Netfs 'nfs' registered for caching
[ 41.465527] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 45.174460] fuse init (API version 7.17)
[ 49.114405] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X
[ 50.134429] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 52.130035] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 52.150580] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 52.200575] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 52.200593] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 56.192533] Bluetooth: Core ver 2.16
[ 56.192612] NET: Registered protocol family 31
[ 56.192625] Bluetooth: HCI device and connection manager initialized
[ 56.192639] Bluetooth: HCI socket layer initialized
[ 56.192648] Bluetooth: L2CAP socket layer initialized
[ 56.192666] Bluetooth: SCO socket layer initialized
[ 56.298741] Bluetooth: RFCOMM TTY layer initialized
[ 56.298795] Bluetooth: RFCOMM socket layer initialized
[ 56.298803] Bluetooth: RFCOMM ver 1.11
[ 56.324846] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 56.324870] Bluetooth: BNEP filters: protocol multicast
[ 59.266578] lp0: using parport0 (interrupt-driven).
[ 59.285377] ppdev: user-space parallel port driver
[ 59.408034] eth2: no IPv6 routers present
[ 82.124305] postgres (6089): /proc/6089/oom_adj is deprecated, please use /proc/6089/oom_score_adj instead.
[ 89.822450] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 91.400535] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 92.706049] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 92.706155] NFSD: starting 90-second grace period
[ 117.936056] usb 1-10: reset high-speed USB device number 5 using ehci_hcd
[ 130.201261] usb 1-10: USB disconnect, device number 5
[ 133.212062] usb 1-10: new high-speed USB device number 6 using ehci_hcd
[ 133.360521] usb 1-10: New USB device found, idVendor=0aec, idProduct=3260
[ 133.360549] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 133.360578] usb 1-10: Product: USB Storage Device
[ 133.360585] usb 1-10: Manufacturer: GENERIC
[ 133.360598] usb 1-10: SerialNumber: 200504221023394LD
[ 133.362592] scsi9 : usb-storage 1-10:1.0
[ 134.373052] scsi 9:0:0:0: Direct-Access GENERIC USB Storage-SMC I19B PQ: 0 ANSI: 0 CCS
[ 134.377572] scsi 9:0:0:1: Direct-Access GENERIC USB Storage-CFC I19B PQ: 0 ANSI: 0 CCS
[ 134.381807] scsi 9:0:0:2: Direct-Access GENERIC USB Storage-SDC I19B PQ: 0 ANSI: 0 CCS
[ 134.386060] scsi 9:0:0:3: Direct-Access GENERIC USB Storage-MSC I19B PQ: 0 ANSI: 0 CCS
[ 134.387523] sd 9:0:0:0: Attached scsi generic sg6 type 0
[ 134.388052] sd 9:0:0:1: Attached scsi generic sg7 type 0
[ 134.388620] sd 9:0:0:2: Attached scsi generic sg8 type 0
[ 134.389477] sd 9:0:0:3: Attached scsi generic sg9 type 0
[ 134.397919] sd 9:0:0:0: [sde] Attached SCSI removable disk
[ 134.400505] sd 9:0:0:1: [sdf] Attached SCSI removable disk
[ 134.402773] sd 9:0:0:2: [sdg] Attached SCSI removable disk
[ 134.403876] sd 9:0:0:3: [sdh] Attached SCSI removable disk
[ 137.087709] usb 1-10: USB disconnect, device number 6
[ 2381.082451] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 2605.144649] update-notifier[14853] general protection ip:7f9485bf2dbd sp:7ffff5256930 error:0 in libc-2.13.so[7f9485b7d000+17d000]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 17:24:18 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32 WS Professional, BIOS ASUS M2N32 WS Pro ACPI BIOS Revision 2001 05/05/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6040] f6040
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfeb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeaa000-dfeb0000
[ 0.000000] RAMDISK: 36152000 - 370a1000
[ 0.000000] ACPI: RSDP 00000000000f7f20 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000dfeeb480 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000dfee3280 08189 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000dfeb0000 00040
[ 0.000000] ACPI: TCPA 00000000dfeeb6c0 00032 (v01 HTC HTCACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000dfeeb740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000dfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000dfeeb5c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031994
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ d4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000
[ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
[ 0.000000] Memory: 3976876k/4718592k available (3407k kernel code, 526084k absent, 215632k reserved, 3326k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2209.791 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.58 BogoMIPS (lpj=8839164)
[ 0.008107] pid_max: default: 32768 minimum: 301
[ 0.008198] Security Framework initialized
[ 0.008234] AppArmor: AppArmor disabled by boot time parameter
[ 0.012392] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014991] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.016376] Mount-cache hash table entries: 256
[ 0.016576] Initializing cgroup subsys cpuacct
[ 0.016613] Initializing cgroup subsys memory
[ 0.016661] Initializing cgroup subsys devices
[ 0.016695] Initializing cgroup subsys freezer
[ 0.016730] Initializing cgroup subsys net_cls
[ 0.016763] Initializing cgroup subsys blkio
[ 0.016805] Initializing cgroup subsys perf_event
[ 0.016871] tseg: 00dff00000
[ 0.016903] CPU: Physical Processor ID: 0
[ 0.016936] CPU: Processor Core ID: 0
[ 0.016969] mce: CPU supports 5 MCE banks
[ 0.017009] using AMD E400 aware idle routine
[ 0.017374] ACPI: Core revision 20110623
[ 0.024499] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.064235] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 9a000
[ 0.156155] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156211] Brought up 2 CPUs
[ 0.156245] Total of 2 processors activated (8839.98 BogoMIPS).
[ 0.156783] devtmpfs: initialized
[ 0.160265] PM: Registering ACPI NVS region at dfeb0000 (208896 bytes)
[ 0.160265] print_constraints: dummy:
[ 0.160360] NET: Registered protocol family 16
[ 0.160521] node 0 link 0: io port [a000, ffff]
[ 0.160556] TOM: 00000000e0000000 aka 3584M
[ 0.160589] node 0 link 0: mmio [a0000, bffff]
[ 0.160645] node 0 link 0: mmio [e0000000, efffffff]
[ 0.160700] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.160755] node 0 link 0: mmio [f0000000, f09fffff]
[ 0.160810] TOM2: 0000000120000000 aka 4608M
[ 0.160844] bus: [00, 09] on node 0 link 0
[ 0.160878] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.160912] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.160946] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff]
[ 0.160980] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[ 0.161014] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[ 0.161057] ACPI: bus type pci registered
[ 0.161170] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.161216] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.168108] PCI: Using configuration type 1 for base access
[ 0.168991] bio: create slab <bio-0> at 0
[ 0.168991] ACPI: Added _OSI(Module Device)
[ 0.168991] ACPI: Added _OSI(Processor Device)
[ 0.168991] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.168991] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169416] ACPI: EC: Look up EC in DSDT
[ 0.178298] ACPI: Interpreter enabled
[ 0.178339] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.178503] ACPI: Using IOAPIC for interrupt routing
[ 0.186372] ACPI: No dock devices found.
[ 0.186409] HEST: Table not found.
[ 0.186445] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186561] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.186746] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.186783] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.186819] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.186862] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.186905] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470c]
[ 0.186941] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.186984] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.187028] pci_root PNP0A08:00: host bridge window expanded to [io 0x0d00-0xffff]; [io 0x4700-0x470c] ignored
[ 0.187087] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500
[ 0.187163] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.187227] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.187296] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.187365] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.187434] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.187500] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.187560] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.187634] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.187692] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187729] pci 0000:00:04.0: PME# disabled
[ 0.187792] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500
[ 0.188017] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601
[ 0.188078] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.188130] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05
[ 0.188192] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.188231] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.188295] pci 0000:00:09.1: PME# supported from D3hot D3cold
[ 0.188333] pci 0000:00:09.1: PME# disabled
[ 0.188386] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03
[ 0.188428] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.188496] pci 0000:00:0a.0: supports D1 D2
[ 0.188530] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188567] pci 0000:00:0a.0: PME# disabled
[ 0.188613] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03
[ 0.188655] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.188725] pci 0000:00:0a.1: supports D1 D2
[ 0.188758] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188795] pci 0000:00:0a.1: PME# disabled
[ 0.188846] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101
[ 0.188898] pci 0000:00:0c.0: reg 20: [io 0xf400-0xf40f]
[ 0.188962] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101
[ 0.189004] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7]
[ 0.189041] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.189079] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977]
[ 0.189116] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.189153] pci 0000:00:0d.0: reg 20: [io 0xe000-0xe00f]
[ 0.286322] NET: Registered protocol family 1
[ 0.286407] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.286699] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.286749] pci 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 0.356039] pci 0000:00:0a.0: PCI INT A disabled
[ 0.356299] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.356351] pci 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.356421] pci 0000:00:0a.1: PCI INT B disabled
[ 0.356505] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.356582] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.356737] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.356819] pci 0000:00:0e.1: Enabling HT MSI Mapping
[ 0.356910] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.357007] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.357107] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 0.357322] pci 0000:00:15.0: Enabling HT MSI Mapping
[ 0.357438] pci 0000:00:16.0: Enabling HT MSI Mapping
[ 0.357559] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.357653] PCI: CLS 32 bytes, default 64
[ 0.357751] Unpacking initramfs...
[ 0.753923] Freeing initrd memory: 15676k freed
[ 0.764892] PCI-DMA: Disabling AGP.
[ 0.765056] PCI-DMA: using GART IOMMU.
[ 0.765091] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.769502] audit: initializing netlink socket (disabled)
[ 0.797950] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.823885] VFS: Disk quotas dquot_6.5.2
[ 0.823960] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.824099] msgmni has been set to 7926
[ 0.824349] alg: No test for stdrng (krng)
[ 0.824486] io scheduler noop registered
[ 0.824519] io scheduler deadline registered
[ 0.824573] io scheduler cfq registered (default)
[ 0.824856] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.824993] pcieport 0000:00:12.0: setting latency timer to 64
[ 0.825052] pcieport 0000:00:12.0: irq 41 for MSI/MSI-X
[ 0.825231] pcieport 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.825352] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.825408] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 0.825586] pcieport 0000:00:16.0: irq 44 for MSI/MSI-X
[ 0.825709] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.825765] pcieport 0000:00:17.0: irq 45 for MSI/MSI-X
[ 0.826071] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.826107] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.826677] ERST: Table is not found!
[ 0.826710] GHES: HEST is not enabled!
[ 0.847231] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.924570] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.940448] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.940896] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.940936] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.941151] mousedev: PS/2 mouse device common for all mice
[ 0.941425] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.941491] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.941538] cpuidle: using governor ladder
[ 0.941825] TCP cubic registered
[ 0.941924] NET: Registered protocol family 10
[ 0.942510] Mobile IPv6
[ 0.956191] rtc_cmos 00:04: setting system clock to 2012-07-07 14:03:44 UTC (1341669824)
[ 0.956288] Initializing network drop monitor service
[ 0.958106] Write protecting the kernel read-only data: 6144k
[ 0.961355] Freeing unused kernel memory: 672k freed
[ 0.989950] udevd[96]: starting version 175
[ 1.071202] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.071386] ACPI: Power Button [PWRB]
[ 1.071567] ACPI: Power Button [PWRF]
[ 1.074561] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.074885] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
[ 1.074932] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.081866] usbcore: registered new interface driver usbfs
[ 1.081935] usbcore: registered new interface driver hub
[ 1.091720] usbcore: registered new device driver usb
[ 1.099011] [drm] Initialized drm 1.1.0 20060810
[ 1.101506] wmi: Mapper loaded
[ 1.104885] libata version 3.00 loaded.
[ 1.126619] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 1.126663] nouveau 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 1.126710] nouveau 0000:01:00.0: setting latency timer to 64
[ 1.140278] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 1.181746] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 1.181914] ACPI: [Package] has zero elements (ffff880115968d40)
[ 1.181974] ACPI: Invalid passive threshold
[ 1.182290] ACPI: Thermal Zone [THRM] (40 C)
[ 1.188218] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.188256] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1.188292] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.50
[ 1.188364] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[ 1.188409] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 1.188456] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 1.188531] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 1.188567] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0c011312 00c00000
[ 1.188643] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 1.188681] [drm] nouveau 0000:01:00.0: 0: 0x00000030: type 0x30 idx 0 tag 0xff
[ 1.188725] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 1.188768] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 1.188855] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 1.188903] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCDED
[ 1.189200] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD497
[ 1.201426] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD16
[ 1.204592] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF22
[ 1.207563] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.207620] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1.240427] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 1.240470] [drm] nouveau 0000:01:00.0: 0: core 400MHz shader 400MHz memory 333MHz voltage 1100mV fanspeed 100%
[ 1.240737] [TTM] Zone kernel: Available graphics memory: 2030216 kiB.
[ 1.240773] [TTM] Initializing pool allocator.
[ 1.240819] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 1.243756] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.292421] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.295169] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.295206] [drm] No driver support for vblank timestamp query.
[ 1.295307] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1.295351] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[ 1.295402] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 1.480388] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ffff8801177ffc00
[ 1.480886] fbcon: nouveaufb (fb0) is primary device
[ 1.494178] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 1.543794] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 1.544706] Console: switching to colour frame buffer device 128x48
[ 1.545619] drm: registered panic notifier
[ 1.545630] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 1.596750] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:06:5d
[ 1.597079] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20
[ 1.597104] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20
[ 1.792149] firewire_core: created device fw0: GUID 0011d80000c8637e, S400
[ 2.120768] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:08:8e
[ 2.120784] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.120929] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[ 2.120940] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 2.121018] ehci_hcd 0000:00:0a.1: debug port 1
[ 2.121030] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported
[ 2.132039] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 2.132077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.132413] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.132728] usb usb1: Product: EHCI Host Controller
[ 2.133354] usb usb1: SerialNumber: 0000:00:0a.1
[ 2.133948] hub 1-0:1.0: USB hub found
[ 2.134265] hub 1-0:1.0: 10 ports detected
[ 2.135351] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 2.135655] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 2.136891] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 2.137630] scsi0 : sata_nv
[ 2.138512] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 2.138814] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 2.139390] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 2.139959] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 2.140683] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 2.141363] scsi2 : sata_nv
[ 2.142166] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 2.142445] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 2.142974] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 2.143517] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 2.144261] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 2.145819] scsi5 : sata_nv
[ 2.146241] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 21
[ 2.146516] ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 21
[ 2.147214] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 2.147473] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 2.148042] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[ 2.206038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.206291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.206786] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 2.207031] usb usb2: SerialNumber: 0000:00:0a.0
[ 2.207692] hub 2-0:1.0: 10 ports detected
[ 2.208154] pata_amd 0000:00:0c.0: version 0.4.1
[ 2.209103] scsi6 : pata_amd
[ 2.209452] scsi7 : pata_amd
[ 2.210187] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.372382] ata7.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[ 2.372638] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 2.388348] ata7.00: configured for UDMA/33
[ 2.556028] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 2.604034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.608036] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.616594] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.628251] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 2.628497] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.636248] ata1.00: configured for UDMA/133
[ 2.636683] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 2.688742] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.689285] hub 1-3:1.0: USB hub found
[ 2.689725] hub 1-3:1.0: 4 ports detected
[ 3.104037] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.128280] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 3.136254] ata2.00: configured for UDMA/133
[ 3.136675] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 3.137256] scsi 2:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.206315] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.206573] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 3.512026] usb 2-2: new low-speed USB device number 3 using ohci_hcd
[ 3.604036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.612350] ata4.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 3.628336] ata4.00: configured for UDMA/133
[ 3.628723] scsi 3:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.730052] usb 2-2: New USB device found, idVendor=046d, idProduct=c30f
[ 3.730581] usb 2-2: Product: Logitech USB Keyboard
[ 3.730832] usb 2-2: Manufacturer: Logitech
[ 4.104168] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
[ 4.120161] ata6.00: configured for UDMA/100
[ 4.121648] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB04 PQ: 0 ANSI: 5
[ 4.128289] ata8: port disabled--ignoring
[ 4.137359] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.138112] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.142348] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.143146] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 4.150067] sd 0:0:0:0: [sda] Write Protect is off
[ 4.150347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.150637] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.151653] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.151929] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.152698] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 4.153080] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 4.153473] sd 2:0:0:0: [sdc] Write Protect is off
[ 4.153475] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.154601] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.155597] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.158768] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input2
[ 4.159194] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-1/input0
[ 4.166800] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:0a.0-2/input0
[ 4.179768] sdc: sdc1
[ 4.182014] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4.182121] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 4.182784] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.1/input/input4
[ 4.183809] usbcore: registered new interface driver usbhid
[ 4.184138] usbhid: USB HID core driver
[ 4.223226] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.224107] sda: sda1 sda2 sda3 sda4
[ 4.224838] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.575066] vga16fb: mapped to 0xffff8800000a0000
[ 4.575469] fb1: VGA16 VGA frame buffer device
[ 4.582498] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.893315] md: raid1 personality registered for level 1
[ 4.896971] mdadm: sending ioctl 800c0910 to a partition!
[ 4.897569] mdadm: sending ioctl 1261 to a partition!
[ 4.897840] mdadm: sending ioctl 1261 to a partition!
[ 4.898658] mdadm: sending ioctl 1261 to a partition!
[ 4.899132] mdadm: sending ioctl 1261 to a partition!
[ 4.899830] mdadm: sending ioctl 1261 to a partition!
[ 4.900105] mdadm: sending ioctl 1261 to a partition!
[ 4.948645] md: md0 stopped.
[ 4.953530] md: bind<sda1>
[ 4.955942] bio: create slab <bio-1> at 1
[ 4.956339] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.958623] md0: unknown partition table
[ 4.984898] md: md1 stopped.
[ 4.992869] md: bind<sdb3>
[ 4.995310] md/raid1:md1: not clean -- starting background reconstruction
[ 4.995570] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.995832] md1: detected capacity change from 0 to 79998943232
[ 4.998348] md1: unknown partition table
[ 5.048050] md: md2 stopped.
[ 5.051765] md: bind<sdb4>
[ 5.052296] md: bind<sda4>
[ 5.054832] md/raid1:md2: active with 2 out of 2 mirrors
[ 5.055088] md2: detected capacity change from 0 to 237973733376
[ 5.087790] md2: unknown partition table
[ 5.107432] md: md3 stopped.
[ 5.109684] md: bind<sdd1>
[ 5.110133] md: bind<sdc1>
[ 5.112114] md/raid1:md3: not clean -- starting background reconstruction
[ 5.112340] md/raid1:md3: active with 2 out of 2 mirrors
[ 5.112571] md3: detected capacity change from 0 to 2000395101184
[ 5.118321] md3: unknown partition table
[ 5.212545] PM: Starting manual resume from disk
[ 5.212765] PM: Hibernation image partition 8:2 present
[ 5.212967] PM: Looking for hibernation image.
[ 5.213428] PM: Image not found (code -22)
[ 5.213656] PM: Hibernation image not present or could not be loaded.
[ 5.220759] REISERFS (device md1): found reiserfs format "3.6" with standard journal
[ 5.221000] REISERFS (device md1): using ordered data mode
[ 5.221208] reiserfs: using flush barriers
[ 5.244796] REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.246421] REISERFS (device md1): checking transaction log (md1)
[ 5.279184] md: resync of RAID array md1
[ 5.279437] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 5.279670] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 5.279909] md: using 128k window, over a total of 78123968k.
[ 11.552381] REISERFS (device md1): replayed 473 transactions in 7 seconds
[ 12.592401] REISERFS (device md1): Using r5 hash to sort names
[ 14.820141] udevd[501]: starting version 175
[ 16.045299] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 16.073831] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.137591] EDAC MC: Ver: 2.1.0
[ 16.292578] MCE: In-kernel MCE decoding enabled.
[ 16.319016] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 16.449592] parport_pc 00:08: reported by Plug and Play ACPI
[ 16.450019] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 16.474306] AMD64 EDAC driver v3.4.0
[ 16.474939] EDAC amd64: DRAM ECC disabled.
[ 16.475303] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.475305] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.475306] (Note that use of the override may cause unknown side effects.)
[ 16.512729] scsi_verify_blk_ioctl: 342 callbacks suppressed
[ 16.513085] mdadm: sending ioctl 1261 to a partition!
[ 16.513407] mdadm: sending ioctl 1261 to a partition!
[ 16.514952] mdadm: sending ioctl 1261 to a partition!
[ 16.515290] mdadm: sending ioctl 1261 to a partition!
[ 16.515852] mdadm: sending ioctl 1261 to a partition!
[ 16.516227] mdadm: sending ioctl 1261 to a partition!
[ 16.633280] ACPI: resource nForce2_smbus [io 0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
[ 16.633616] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.634003] i2c i2c-3: nForce2 SMBus adapter at 0x1c40
[ 17.108552] udevd[568]: renamed network interface eth0 to rename2
[ 17.132533] udevd[573]: renamed network interface eth1 to eth2
[ 17.172507] udevd[568]: renamed network interface rename2 to eth1
[ 18.055661] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 18.055990] snd_hda_intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 18.056313] hda_intel: msi for device 1043:81f6 set to 0
[ 18.056676] snd_hda_intel 0000:00:0e.1: setting latency timer to 64
[ 18.889865] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/input/input6
[ 18.962191] mdadm: sending ioctl 800c0910 to a partition!
[ 18.962521] mdadm: sending ioctl 800c0910 to a partition!
[ 18.963053] mdadm: sending ioctl 1261 to a partition!
[ 18.963348] mdadm: sending ioctl 1261 to a partition!
[ 21.800761] scsi_verify_blk_ioctl: 156 callbacks suppressed
[ 21.801059] mdadm: sending ioctl 800c0910 to a partition!
[ 21.801331] mdadm: sending ioctl 800c0910 to a partition!
[ 21.801598] mdadm: sending ioctl 1261 to a partition!
[ 21.801855] mdadm: sending ioctl 1261 to a partition!
[ 21.802277] mdadm: sending ioctl 1261 to a partition!
[ 21.802532] mdadm: sending ioctl 1261 to a partition!
[ 21.802940] mdadm: sending ioctl 1261 to a partition!
[ 21.803186] mdadm: sending ioctl 1261 to a partition!
[ 21.803592] mdadm: sending ioctl 1261 to a partition!
[ 21.803831] mdadm: sending ioctl 1261 to a partition!
[ 22.548237] Adding 1951892k swap on /dev/sda2. Priority:5 extents:1 across:1951892k
[ 22.565828] Adding 1951892k swap on /dev/sdb2. Priority:5 extents:1 across:1951892k
[ 23.006566] reiserfs: enabling write barrier flush mode
[ 23.202564] REISERFS (device md1): Removing [26 5086905 0x0 SD]..done
[ 23.211084] REISERFS (device md1): There were 1 uncompleted unlinks/truncates. Completed
[ 24.022150] loop: module loaded
[ 24.169741] microcode: CPU0: family 15 not supported
[ 24.320763] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.321103] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 24.321411] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 24.321701] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 24.507718] usbcore: registered new interface driver usblp
[ 24.553601] Bridge firewalling registered
[ 24.635103] Driver for 1-wire Dallas network protocol.
[ 24.670706] it87: Found IT8716F chip at 0x290, revision 0
[ 24.671234] it87: VID is disabled (pins used for GPIO)
[ 24.671805] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x295-0x296]
[ 24.672369] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.844982] netconsole: local port 6666
[ 24.845529] netconsole: local IP 172.16.0.3
[ 24.846040] netconsole: interface 'eth1'
[ 24.846536] netconsole: remote port 6666
[ 24.847025] netconsole: remote IP 172.16.0.13
[ 24.847519] netconsole: remote ethernet address 00:1c:23:85:ba:39
[ 24.848048] netconsole: device eth1 not up yet, forcing it
[ 24.849950] forcedeth 0000:00:10.0: irq 46 for MSI/MSI-X
[ 28.861306] console [netcon0] enabled
[ 28.861911] netconsole: network logging started
[ 30.664500] scsi_verify_blk_ioctl: 606 callbacks suppressed
[ 30.665104] mdadm: sending ioctl 1261 to a partition!
[ 30.665681] mdadm: sending ioctl 1261 to a partition!
[ 31.202500] mdadm: sending ioctl 1261 to a partition!
[ 31.203110] mdadm: sending ioctl 1261 to a partition!
[ 31.301651] mdadm: sending ioctl 1261 to a partition!
[ 31.302268] mdadm: sending ioctl 1261 to a partition!
[ 31.541739] md: resync of RAID array md3
[ 31.542431] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 31.543040] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 31.543656] md: using 128k window, over a total of 1953510841k.
[ 35.336032] eth1: no IPv6 routers present
[ 119.412307] mdadm: sending ioctl 1261 to a partition!
[ 119.412806] mdadm: sending ioctl 1261 to a partition!
[ 119.747086] kjournald starting. Commit interval 5 seconds
[ 119.764342] EXT3-fs (md0): using internal journal
[ 119.764843] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 119.777944] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 119.778497] REISERFS (device md2): using ordered data mode
[ 119.778990] reiserfs: using flush barriers
[ 119.786077] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 119.789602] REISERFS (device md2): checking transaction log (md2)
[ 119.945268] REISERFS (device md2): Using r5 hash to sort names
[ 120.019757] REISERFS (device md3): found reiserfs format "3.6" with standard journal
[ 120.020485] REISERFS (device md3): using ordered data mode
[ 120.021037] reiserfs: using flush barriers
[ 120.028000] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 120.031509] REISERFS (device md3): checking transaction log (md3)
[ 120.116742] REISERFS (device md3): Using r5 hash to sort names
[ 120.220189] REISERFS (device md3): Removing [197092 649784 0x0 SD]..done
[ 120.244203] REISERFS (device md3): Removing [195090 649781 0x0 SD]..done
[ 120.305374] REISERFS (device md3): Removing [573640 649749 0x0 SD]..done
[ 120.327900] REISERFS (device md3): Removing [195090 647353 0x0 SD]..done
[ 120.328615] REISERFS (device md3): Removing [197092 647323 0x0 SD]..done
[ 120.347319] REISERFS (device md3): Removing [573640 647318 0x0 SD]..done
[ 120.361107] REISERFS (device md3): Removing [197092 646486 0x0 SD]..done
[ 120.385374] REISERFS (device md3): Removing [197092 638030 0x0 SD]..done
[ 120.397122] REISERFS (device md3): There were 8 uncompleted unlinks/truncates. Completed
[ 123.429848] RPC: Registered named UNIX socket transport module.
[ 123.430482] RPC: Registered udp transport module.
[ 123.431105] RPC: Registered tcp transport module.
[ 123.431705] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 123.500355] FS-Cache: Loaded
[ 123.558676] FS-Cache: Netfs 'nfs' registered for caching
[ 123.587482] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 127.300902] fuse init (API version 7.17)
[ 131.119259] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X
[ 132.951904] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 135.399445] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 135.419524] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 135.469160] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 135.469172] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 142.070213] Bluetooth: Core ver 2.16
[ 142.070292] NET: Registered protocol family 31
[ 142.070301] Bluetooth: HCI device and connection manager initialized
[ 142.070332] Bluetooth: HCI socket layer initialized
[ 142.070342] Bluetooth: L2CAP socket layer initialized
[ 142.071025] Bluetooth: SCO socket layer initialized
[ 142.114644] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 142.114670] Bluetooth: BNEP filters: protocol multicast
[ 142.116186] Bluetooth: RFCOMM TTY layer initialized
[ 142.116214] Bluetooth: RFCOMM socket layer initialized
[ 142.116224] Bluetooth: RFCOMM ver 1.11
[ 142.192029] eth2: no IPv6 routers present
[ 147.110166] lp0: using parport0 (interrupt-driven).
[ 147.282543] ppdev: user-space parallel port driver
[ 184.923005] postgres (6793): /proc/6793/oom_adj is deprecated, please use /proc/6793/oom_score_adj instead.
[ 191.367937] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 192.911718] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 193.983119] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 193.983228] NFSD: starting 90-second grace period
[ 487.384550] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 487.404772] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 487.454975] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 487.454983] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 1732.146071] general protection fault: 0000 [#1] SMP [ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 17:24:18 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32 WS Professional, BIOS ASUS M2N32 WS Pro ACPI BIOS Revision 2001 05/05/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6040] f6040
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfeb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeaa000-dfeb0000
[ 0.000000] RAMDISK: 36152000 - 370a1000
[ 0.000000] ACPI: RSDP 00000000000f7f20 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000dfeeb480 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000dfee3280 08189 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000dfeb0000 00040
[ 0.000000] ACPI: TCPA 00000000dfeeb6c0 00032 (v01 HTC HTCACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000dfeeb740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000dfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000dfeeb5c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031994
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ d4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000
[ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
[ 0.000000] Memory: 3976876k/4718592k available (3407k kernel code, 526084k absent, 215632k reserved, 3326k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2209.906 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.81 BogoMIPS (lpj=8839624)
[ 0.004107] pid_max: default: 32768 minimum: 301
[ 0.004198] Security Framework initialized
[ 0.004234] AppArmor: AppArmor disabled by boot time parameter
[ 0.008383] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010979] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012364] Mount-cache hash table entries: 256
[ 0.012563] Initializing cgroup subsys cpuacct
[ 0.012600] Initializing cgroup subsys memory
[ 0.012648] Initializing cgroup subsys devices
[ 0.012682] Initializing cgroup subsys freezer
[ 0.012717] Initializing cgroup subsys net_cls
[ 0.012751] Initializing cgroup subsys blkio
[ 0.012793] Initializing cgroup subsys perf_event
[ 0.012859] tseg: 00dff00000
[ 0.012891] CPU: Physical Processor ID: 0
[ 0.012924] CPU: Processor Core ID: 0
[ 0.012957] mce: CPU supports 5 MCE banks
[ 0.012997] using AMD E400 aware idle routine
[ 0.013362] ACPI: Core revision 20110623
[ 0.020487] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060227] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152060] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152116] Brought up 2 CPUs
[ 0.152149] Total of 2 processors activated (8840.21 BogoMIPS).
[ 0.152688] devtmpfs: initialized
[ 0.156265] PM: Registering ACPI NVS region at dfeb0000 (208896 bytes)
[ 0.156265] print_constraints: dummy:
[ 0.156360] NET: Registered protocol family 16
[ 0.156521] node 0 link 0: io port [a000, ffff]
[ 0.156556] TOM: 00000000e0000000 aka 3584M
[ 0.156590] node 0 link 0: mmio [a0000, bffff]
[ 0.156645] node 0 link 0: mmio [e0000000, efffffff]
[ 0.156700] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.156756] node 0 link 0: mmio [f0000000, f09fffff]
[ 0.156811] TOM2: 0000000120000000 aka 4608M
[ 0.156845] bus: [00, 09] on node 0 link 0
[ 0.156879] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.156913] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.156947] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff]
[ 0.156981] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[ 0.157015] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[ 0.157058] ACPI: bus type pci registered
[ 0.157171] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.157217] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.163872] PCI: Using configuration type 1 for base access
[ 0.164765] bio: create slab <bio-0> at 0
[ 0.164765] ACPI: Added _OSI(Module Device)
[ 0.164765] ACPI: Added _OSI(Processor Device)
[ 0.164765] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.164765] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165416] ACPI: EC: Look up EC in DSDT
[ 0.174084] ACPI: Interpreter enabled
[ 0.174126] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.174290] ACPI: Using IOAPIC for interrupt routing
[ 0.182155] ACPI: No dock devices found.
[ 0.182191] HEST: Table not found.
[ 0.182227] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.182343] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.182529] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.182565] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.182601] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.182644] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.182688] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470c]
[ 0.182723] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.182766] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.182811] pci_root PNP0A08:00: host bridge window expanded to [io 0x0d00-0xffff]; [io 0x4700-0x470c] ignored
[ 0.182870] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500
[ 0.182946] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.183009] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.183078] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.183147] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.183216] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.183282] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.183342] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.183416] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.183475] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183511] pci 0000:00:04.0: PME# disabled
[ 0.183574] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500
[ 0.183789] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601
[ 0.183850] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.183902] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05
[ 0.183963] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.184002] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.184046] pci 0000:00:09.1: PME# supported from D3hot D3cold
[ 0.184084] pci 0000:00:09.1: PME# disabled
[ 0.184137] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03
[ 0.184179] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.184248] pci 0000:00:0a.0: supports D1 D2
[ 0.184281] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184318] pci 0000:00:0a.0: PME# disabled
[ 0.184364] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03
[ 0.184406] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.184476] pci 0000:00:0a.1: supports D1 D2
[ 0.184509] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184546] pci 0000:00:0a.1: PME# disabled
[ 0.184597] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101
[ 0.184649] pci 0000:00:0c.0: reg 20: [io 0xf400-0xf40f]
[ 0.184712] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101
[ 0.184755] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7]
[ 0.184792] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.184830] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977]
[ 0.184867] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.184904] pci 0000:00:0d.0: reg 20: [io 0xe000-0xe00f]
[ 0.353437] pci 0000:00:16.0: Enabling HT MSI Mapping
[ 0.353558] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.353610] pci 0000:01:00.0: Boot video device
[ 0.353652] PCI: CLS 32 bytes, default 64
[ 0.353751] Unpacking initramfs...
[ 0.749915] Freeing initrd memory: 15676k freed
[ 0.760870] PCI-DMA: Disabling AGP.
[ 0.761034] PCI-DMA: using GART IOMMU.
[ 0.761069] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.765484] audit: initializing netlink socket (disabled)
[ 0.793929] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.819868] VFS: Disk quotas dquot_6.5.2
[ 0.819944] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.820083] msgmni has been set to 7926
[ 0.820334] alg: No test for stdrng (krng)
[ 0.820471] io scheduler noop registered
[ 0.820504] io scheduler deadline registered
[ 0.820558] io scheduler cfq registered (default)
[ 0.820841] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.820978] pcieport 0000:00:12.0: setting latency timer to 64
[ 0.821037] pcieport 0000:00:12.0: irq 41 for MSI/MSI-X
[ 0.821160] pcieport 0000:00:14.0: setting latency timer to 64
[ 0.821338] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.821394] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 0.821516] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.821695] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.821751] pcieport 0000:00:17.0: irq 45 for MSI/MSI-X
[ 0.821988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.822093] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.822664] ERST: Table is not found!
[ 0.822697] GHES: HEST is not enabled!
[ 0.843217] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920570] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.936268] Linux agpgart interface v0.103
[ 0.936896] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.936936] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.937151] mousedev: PS/2 mouse device common for all mice
[ 0.937425] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.937491] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.937571] cpuidle: using governor menu
[ 0.937825] TCP cubic registered
[ 0.937925] NET: Registered protocol family 10
[ 0.938543] NET: Registered protocol family 17
[ 0.938579] Registering the dns_resolver key type
[ 0.938817] PM: Hibernation image not present or could not be loaded.
[ 0.952185] rtc_cmos 00:04: setting system clock to 2012-07-07 14:33:03 UTC (1341671583)
[ 0.952281] Initializing network drop monitor service
[ 0.953825] Freeing unused kernel memory: 572k freed
[ 0.954100] Write protecting the kernel read-only data: 6144k
[ 0.961152] Freeing unused kernel memory: 684k freed
[ 0.985881] udevd[96]: starting version 175
[ 1.064895] SCSI subsystem initialized
[ 1.068488] usbcore: registered new interface driver hub
[ 1.069724] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.069989] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 1.070089] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.070794] usbcore: registered new device driver usb
[ 1.071508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.078093] ACPI: Power Button [PWRB]
[ 1.078229] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.078273] ACPI: Power Button [PWRF]
[ 1.085843] wmi: Mapper loaded
[ 1.098232] libata version 3.00 loaded.
[ 1.110438] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 1.110533] ACPI: [Package] has zero elements (ffff880116a755c0)
[ 1.110567] ACPI: Invalid passive threshold
[ 1.110809] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.140252] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.140313] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1.154737] nouveau 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 1.154784] nouveau 0000:01:00.0: setting latency timer to 64
[ 1.157932] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200b1)
[ 1.208353] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.208390] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1.208426] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.50
[ 1.208497] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[ 1.208540] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 1.208622] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000302 00000000
[ 1.208658] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 1.208694] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0c011312 00c00000
[ 1.208767] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 1.208804] [drm] nouveau 0000:01:00.0: 0: 0x00000030: type 0x30 idx 0 tag 0xff
[ 1.208848] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 1.208935] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 1.208979] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 1.209324] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD497
[ 1.221490] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDB92
[ 1.221548] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD16
[ 1.224714] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF22
[ 1.224819] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.243662] [drm] nouveau 0000:01:00.0: 0: core 400MHz shader 400MHz memory 333MHz voltage 1100mV fanspeed 100%
[ 1.243713] [drm] nouveau 0000:01:00.0: c: core 351MHz shader 351MHz memory 265MHz
[ 1.243913] [TTM] Zone kernel: Available graphics memory: 2030216 kiB.
[ 1.244019] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 1.246992] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.298308] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.298346] [drm] No driver support for vblank timestamp query.
[ 1.298394] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 1.298448] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1.298540] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 1.298584] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
[ 1.484895] fbcon: nouveaufb (fb0) is primary device
[ 1.498190] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 1.547805] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 1.548724] Console: switching to colour frame buffer device 128x48
[ 1.549626] fb0: nouveaufb frame buffer device
[ 1.549643] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 1.592712] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:06:5d
[ 1.592734] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.593063] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20
[ 1.593077] forcedeth 0000:00:11.0: setting latency timer to 64
[ 1.724150] firewire_core: created device fw0: GUID 0011d80000c8637e, S400
[ 2.116782] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.116885] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 2.116940] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 2.116978] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 2.117014] ehci_hcd 0000:00:0a.1: debug port 1
[ 2.117061] ehci_hcd 0000:00:0a.1: irq 22, io mem 0xfe02e000
[ 2.128030] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 2.128067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.128694] usb usb1: Product: EHCI Host Controller
[ 2.128992] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 2.129916] hub 1-0:1.0: USB hub found
[ 2.130219] hub 1-0:1.0: 10 ports detected
[ 2.131236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.131981] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 2.132316] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 2.132638] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 2.190036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.190339] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.190927] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 2.191216] usb usb2: SerialNumber: 0000:00:0a.0
[ 2.192033] hub 2-0:1.0: 10 ports detected
[ 2.192476] sata_nv 0000:00:0d.0: version 3.5
[ 2.193211] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 2.193477] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 2.194233] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 2.195328] scsi1 : sata_nv
[ 2.195738] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 2.196037] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 2.196823] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 2.197085] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 2.197767] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 2.198799] scsi3 : sata_nv
[ 2.199194] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 2.199455] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 2.200232] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.200482] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 2.202216] scsi4 : sata_nv
[ 2.202857] scsi5 : sata_nv
[ 2.203469] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 21
[ 2.204225] pata_amd 0000:00:0c.0: version 0.4.1
[ 2.204519] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 2.205550] scsi7 : pata_amd
[ 2.206277] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.206530] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.368376] ata7.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[ 2.368648] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 2.384360] ata7.00: configured for UDMA/33
[ 2.516028] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.552028] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 2.664050] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.664054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.672343] ata3.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 2.672601] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.684467] usb 1-3: New USB device found, idVendor=050d, idProduct=0234
[ 2.684725] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.685301] hub 1-3:1.0: USB hub found
[ 2.685719] hub 1-3:1.0: 4 ports detected
[ 2.688346] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 2.688631] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.688644] ata3.00: configured for UDMA/133
[ 2.696260] ata1.00: configured for UDMA/133
[ 2.696682] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 2.988020] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[ 3.164041] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.188279] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 3.188541] ata2.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.196264] ata2.00: configured for UDMA/133
[ 3.196664] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 3.197233] scsi 2:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.202050] usb 2-1: New USB device found, idVendor=046d, idProduct=c00e
[ 3.202321] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.202582] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 3.202839] usb 2-1: Manufacturer: Logitech
[ 3.508031] usb 2-2: new low-speed USB device number 3 using ohci_hcd
[ 3.664038] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.672358] ata4.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 3.672637] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.688343] ata4.00: configured for UDMA/133
[ 3.688781] scsi 3:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.727049] usb 2-2: New USB device found, idVendor=046d, idProduct=c30f
[ 3.727330] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.727597] usb 2-2: Product: Logitech USB Keyboard
[ 3.727856] usb 2-2: Manufacturer: Logitech
[ 3.739337] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input2
[ 3.739756] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-1/input0
[ 3.747312] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.0/input/input3
[ 3.747655] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:0a.0-2/input0
[ 3.763147] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.1/input/input4
[ 3.763837] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:0a.0-2/input1
[ 3.764472] usbcore: registered new interface driver usbhid
[ 3.764764] usbhid: USB HID core driver
[ 4.156039] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.164171] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
[ 4.180163] ata6.00: configured for UDMA/100
[ 4.181676] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB04 PQ: 0 ANSI: 5
[ 4.187998] scsi 6:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
[ 4.188595] ata8: port disabled--ignoring
[ 4.199991] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.200356] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.204382] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.204742] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.205147] sd 0:0:0:0: [sda] Write Protect is off
[ 4.205483] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.205833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.206876] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.206927] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 4.206976] sd 2:0:0:0: [sdc] Write Protect is off
[ 4.206979] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.207000] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.207579] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 4.207627] sd 3:0:0:0: [sdd] Write Protect is off
[ 4.207630] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.207651] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.208319] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.208643] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 4.211368] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.211687] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.212151] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.219678] sda: sda1 sda2 sda3 sda4
[ 4.220553] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.229331] sdc: sdc1
[ 4.229985] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4.230375] sdd: sdd1
[ 4.230929] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 4.259772] sdb: sdb1 sdb2 sdb3 sdb4
[ 4.260694] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.578067] vga16fb: initializing
[ 4.578611] vga16fb: mapped to 0xffff8800000a0000
[ 4.578998] fb1: VGA16 VGA frame buffer device
[ 4.585488] device-mapper: uevent: version 1.0.3
[ 4.586049] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.839004] md: raid1 personality registered for level 1
[ 4.842650] mdadm: sending ioctl 800c0910 to a partition!
[ 4.842963] mdadm: sending ioctl 800c0910 to a partition!
[ 4.843243] mdadm: sending ioctl 1261 to a partition!
[ 4.843510] mdadm: sending ioctl 1261 to a partition!
[ 4.845628] mdadm: sending ioctl 1261 to a partition!
[ 4.845913] mdadm: sending ioctl 1261 to a partition!
[ 4.851507] mdadm: sending ioctl 1261 to a partition!
[ 4.851757] mdadm: sending ioctl 1261 to a partition!
[ 4.872283] mdadm: sending ioctl 1261 to a partition!
[ 4.872527] mdadm: sending ioctl 1261 to a partition!
[ 4.896291] md: md0 stopped.
[ 4.899432] md: bind<sdb1>
[ 4.900822] md: bind<sda1>
[ 4.902670] bio: create slab <bio-1> at 1
[ 4.903033] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.903317] md0: detected capacity change from 0 to 98566144
[ 4.905375] md0: unknown partition table
[ 4.933669] md: md1 stopped.
[ 4.935948] md: bind<sdb3>
[ 4.936472] md: bind<sda3>
[ 4.939780] md/raid1:md1: not clean -- starting background reconstruction
[ 4.940077] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.940334] md1: detected capacity change from 0 to 79998943232
[ 4.965459] md1: unknown partition table
[ 4.994555] md: md2 stopped.
[ 4.996860] md: bind<sdb4>
[ 4.997483] md: bind<sda4>
[ 5.001206] md/raid1:md2: active with 2 out of 2 mirrors
[ 5.001468] md2: detected capacity change from 0 to 237973733376
[ 5.029067] md2: unknown partition table
[ 5.049661] md: md3 stopped.
[ 5.051169] md: bind<sdd1>
[ 5.051640] md: bind<sdc1>
[ 5.054224] md/raid1:md3: not clean -- starting background reconstruction
[ 5.054451] md/raid1:md3: active with 2 out of 2 mirrors
[ 5.054702] md3: detected capacity change from 0 to 2000395101184
[ 5.058865] md3: unknown partition table
[ 5.162308] PM: Starting manual resume from disk
[ 5.162530] PM: Hibernation image partition 8:2 present
[ 5.162731] PM: Looking for hibernation image.
[ 5.163192] PM: Image not found (code -22)
[ 5.163417] PM: Hibernation image not present or could not be loaded.
[ 5.170450] REISERFS (device md1): found reiserfs format "3.6" with standard journal
[ 5.170690] REISERFS (device md1): using ordered data mode
[ 5.170900] reiserfs: using flush barriers
[ 5.182285] REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.183901] REISERFS (device md1): checking transaction log (md1)
[ 5.209932] md: resync of RAID array md1
[ 5.210273] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 5.210617] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 5.210958] md: using 128k window, over a total of 78123968k.
[ 13.148452] REISERFS (device md1): replayed 346 transactions in 8 seconds
[ 14.462359] REISERFS (device md1): Using r5 hash to sort names
[ 16.768607] udevd[488]: starting version 175
[ 18.006593] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 18.098792] EDAC MC: Ver: 2.1.0
[ 18.142860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.155762] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 18.261882] MCE: In-kernel MCE decoding enabled.
[ 18.286426] parport_pc 00:08: reported by Plug and Play ACPI
[ 18.286856] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 18.367356] scsi_verify_blk_ioctl: 276 callbacks suppressed
[ 18.367712] mdadm: sending ioctl 1261 to a partition!
[ 18.368063] mdadm: sending ioctl 1261 to a partition!
[ 18.369522] mdadm: sending ioctl 1261 to a partition!
[ 18.369863] mdadm: sending ioctl 1261 to a partition!
[ 18.370486] mdadm: sending ioctl 1261 to a partition!
[ 18.370824] mdadm: sending ioctl 1261 to a partition!
[ 18.442015] AMD64 EDAC driver v3.4.0
[ 18.442433] EDAC amd64: DRAM ECC disabled.
[ 18.442768] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 18.442770] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 18.442772] (Note that use of the override may cause unknown side effects.)
[ 18.569591] ACPI: resource nForce2_smbus [io 0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
[ 18.569921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.570306] i2c i2c-3: nForce2 SMBus adapter at 0x1c40
[ 19.036560] udevd[575]: renamed network interface eth0 to rename2
[ 19.048580] udevd[571]: renamed network interface eth1 to eth2
[ 19.100540] udevd[575]: renamed network interface rename2 to eth1
[ 19.774390] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 19.774716] snd_hda_intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 19.775033] hda_intel: msi for device 1043:81f6 set to 0
[ 19.775394] snd_hda_intel 0000:00:0e.1: setting latency timer to 64
[ 20.660153] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/input/input6
[ 20.844340] mdadm: sending ioctl 800c0910 to a partition!
[ 20.844667] mdadm: sending ioctl 800c0910 to a partition!
[ 20.844971] mdadm: sending ioctl 1261 to a partition!
[ 20.845255] mdadm: sending ioctl 1261 to a partition!
[ 23.670628] scsi_verify_blk_ioctl: 156 callbacks suppressed
[ 23.670924] mdadm: sending ioctl 800c0910 to a partition!
[ 23.671193] mdadm: sending ioctl 800c0910 to a partition!
[ 23.671456] mdadm: sending ioctl 1261 to a partition!
[ 23.671713] mdadm: sending ioctl 1261 to a partition!
[ 23.672165] mdadm: sending ioctl 1261 to a partition!
[ 23.672415] mdadm: sending ioctl 1261 to a partition!
[ 23.672817] mdadm: sending ioctl 1261 to a partition!
[ 23.673059] mdadm: sending ioctl 1261 to a partition!
[ 23.673475] mdadm: sending ioctl 1261 to a partition!
[ 23.673705] mdadm: sending ioctl 1261 to a partition!
[ 24.434798] Adding 1951892k swap on /dev/sda2. Priority:5 extents:1 across:1951892k
[ 24.450226] Adding 1951892k swap on /dev/sdb2. Priority:5 extents:1 across:1951892k
[ 24.851584] reiserfs: enabling write barrier flush mode
[ 25.886731] loop: module loaded
[ 26.031422] microcode: CPU0: family 15 not supported
[ 26.182413] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 26.182847] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 26.183246] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 26.183638] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 26.184079] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 26.184437] sr 6:0:0:0: Attached scsi generic sg5 type 5
[ 26.308109] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[ 26.308410] powernow-k8: fid 0xe (2200 MHz), vid 0xc
[ 26.308640] powernow-k8: fid 0xc (2000 MHz), vid 0xe
[ 26.308865] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 26.309085] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 26.377107] usbcore: registered new interface driver usblp
[ 26.423528] Bridge firewalling registered
[ 26.505184] Driver for 1-wire Dallas network protocol.
[ 26.534903] it87: Found IT8716F chip at 0x290, revision 0
[ 26.535406] it87: VID is disabled (pins used for GPIO)
[ 26.535962] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x295-0x296]
[ 26.536505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 26.698373] netconsole: local port 6666
[ 26.698914] netconsole: local IP 172.16.0.3
[ 26.699416] netconsole: interface 'eth1'
[ 26.699900] netconsole: remote port 6666
[ 26.700406] netconsole: remote IP 172.16.0.13
[ 26.700886] netconsole: remote ethernet address 00:1c:23:85:ba:39
[ 26.701367] netconsole: device eth1 not up yet, forcing it
[ 26.703259] forcedeth 0000:00:10.0: irq 46 for MSI/MSI-X
[ 26.707058] netconsole: carrier detect appears untrustworthy, waiting 4 seconds
[ 30.713195] console [netcon0] enabled
[ 30.713763] netconsole: network logging started
[ 32.463204] scsi_verify_blk_ioctl: 606 callbacks suppressed
[ 32.463810] mdadm: sending ioctl 1261 to a partition!
[ 32.464401] mdadm: sending ioctl 1261 to a partition!
[ 33.039296] mdadm: sending ioctl 1261 to a partition!
[ 33.039908] mdadm: sending ioctl 1261 to a partition!
[ 33.154442] mdadm: sending ioctl 1261 to a partition!
[ 33.155060] mdadm: sending ioctl 1261 to a partition!
[ 33.372219] md: resync of RAID array md3
[ 33.372898] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 33.373505] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 33.374104] md: using 128k window, over a total of 1953510841k.
[ 33.777450] mdadm: sending ioctl 1261 to a partition!
[ 33.778137] mdadm: sending ioctl 1261 to a partition!
[ 34.083941] kjournald starting. Commit interval 5 seconds
[ 34.093134] EXT3-fs (md0): using internal journal
[ 34.093807] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 34.095268] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 34.095982] REISERFS (device md2): using ordered data mode
[ 34.096639] reiserfs: using flush barriers
[ 34.097871] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 34.101690] REISERFS (device md2): checking transaction log (md2)
[ 34.209329] REISERFS (device md2): Using r5 hash to sort names
[ 34.242289] REISERFS (device md3): found reiserfs format "3.6" with standard journal
[ 34.243103] REISERFS (device md3): using ordered data mode
[ 34.243777] reiserfs: using flush barriers
[ 34.245691] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 34.249434] REISERFS (device md3): checking transaction log (md3)
[ 34.322484] REISERFS (device md3): Using r5 hash to sort names
[ 36.757605] RPC: Registered named UNIX socket transport module.
[ 36.758338] RPC: Registered udp transport module.
[ 36.759022] RPC: Registered tcp transport module.
[ 36.759671] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 36.832881] FS-Cache: Loaded
[ 36.884557] FS-Cache: Netfs 'nfs' registered for caching
[ 36.909329] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 37.296048] eth1: no IPv6 routers present
[ 40.626684] fuse init (API version 7.17)
[ 44.695271] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X
[ 46.311100] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 49.556464] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 49.577045] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 49.626733] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 49.626750] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 56.048031] eth2: no IPv6 routers present
[ 56.770478] Bluetooth: Core ver 2.16
[ 56.770567] NET: Registered protocol family 31
[ 56.770576] Bluetooth: HCI device and connection manager initialized
[ 56.770588] Bluetooth: HCI socket layer initialized
[ 56.770598] Bluetooth: L2CAP socket layer initialized
[ 56.770614] Bluetooth: SCO socket layer initialized
[ 56.795269] Bluetooth: RFCOMM TTY layer initialized
[ 56.795316] Bluetooth: RFCOMM socket layer initialized
[ 56.795323] Bluetooth: RFCOMM ver 1.11
[ 57.024522] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 57.044611] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 57.094243] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 57.094250] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 57.850432] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 57.851161] Bluetooth: BNEP filters: protocol multicast
[ 65.172769] lp0: using parport0 (interrupt-driven).
[ 65.321428] ppdev: user-space parallel port driver
[ 103.905641] ------------[ cut here ]------------
[ 103.905972] kernel BUG at /build/buildd-linux_3.2.20-1-amd64-lTzScn/linux-3.2.20/fs/dcache.c:474!
[ 103.906281] invalid opcode: 0000 [#1] SMP
[ 103.906582] CPU 1
[ 103.906587] Modules linked in: cpufreq_stats cpufreq_userspace cpufreq_conservative ppdev lp bnep rfcomm bluetooth[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 17:24:18 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32 WS Professional, BIOS ASUS M2N32 WS Pro ACPI BIOS Revision 2001 05/05/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6040] f6040
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfeb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeaa000-dfeb0000
[ 0.000000] RAMDISK: 36152000 - 370a1000
[ 0.000000] ACPI: RSDP 00000000000f7f20 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000dfeeb480 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000dfee3280 08189 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000dfeb0000 00040
[ 0.000000] ACPI: TCPA 00000000dfeeb6c0 00032 (v01 HTC HTCACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000dfeeb740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000dfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000dfeeb5c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031994
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ d4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000
[ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
[ 0.000000] Memory: 3976876k/4718592k available (3407k kernel code, 526084k absent, 215632k reserved, 3326k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2210.113 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.22 BogoMIPS (lpj=8840452)
[ 0.008107] pid_max: default: 32768 minimum: 301
[ 0.008198] Security Framework initialized
[ 0.008234] AppArmor: AppArmor disabled by boot time parameter
[ 0.012393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014988] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.016373] Mount-cache hash table entries: 256
[ 0.016573] Initializing cgroup subsys cpuacct
[ 0.016611] Initializing cgroup subsys memory
[ 0.016658] Initializing cgroup subsys devices
[ 0.016692] Initializing cgroup subsys freezer
[ 0.016727] Initializing cgroup subsys net_cls
[ 0.016761] Initializing cgroup subsys blkio
[ 0.016803] Initializing cgroup subsys perf_event
[ 0.016869] tseg: 00dff00000
[ 0.016901] CPU: Physical Processor ID: 0
[ 0.016933] CPU: Processor Core ID: 0
[ 0.016966] mce: CPU supports 5 MCE banks
[ 0.017007] using AMD E400 aware idle routine
[ 0.017372] ACPI: Core revision 20110623
[ 0.024495] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.064237] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 9a000
[ 0.156081] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156138] Brought up 2 CPUs
[ 0.156171] Total of 2 processors activated (8840.62 BogoMIPS).
[ 0.156710] devtmpfs: initialized
[ 0.160265] PM: Registering ACPI NVS region at dfeb0000 (208896 bytes)
[ 0.160265] print_constraints: dummy:
[ 0.160360] NET: Registered protocol family 16
[ 0.160521] node 0 link 0: io port [a000, ffff]
[ 0.160556] TOM: 00000000e0000000 aka 3584M
[ 0.160590] node 0 link 0: mmio [a0000, bffff]
[ 0.160645] node 0 link 0: mmio [e0000000, efffffff]
[ 0.160700] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.160756] node 0 link 0: mmio [f0000000, f09fffff]
[ 0.160811] TOM2: 0000000120000000 aka 4608M
[ 0.160844] bus: [00, 09] on node 0 link 0
[ 0.160879] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.160912] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.160947] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff]
[ 0.160981] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[ 0.161015] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[ 0.161058] ACPI: bus type pci registered
[ 0.161171] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.161217] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.168171] PCI: Using configuration type 1 for base access
[ 0.169053] bio: create slab <bio-0> at 0
[ 0.169053] ACPI: Added _OSI(Module Device)
[ 0.169053] ACPI: Added _OSI(Processor Device)
[ 0.169053] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.169053] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169415] ACPI: EC: Look up EC in DSDT
[ 0.178487] ACPI: Interpreter enabled
[ 0.178529] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.178693] ACPI: Using IOAPIC for interrupt routing
[ 0.186567] ACPI: No dock devices found.
[ 0.186603] HEST: Table not found.
[ 0.186639] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186755] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.186940] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.186976] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.187012] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.187055] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.187098] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470c]
[ 0.187134] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.187177] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.187221] pci_root PNP0A08:00: host bridge window expanded to [io 0x0d00-0xffff]; [io 0x4700-0x470c] ignored
[ 0.187280] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500
[ 0.187357] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.187420] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.187489] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.187559] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.187628] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.187694] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.187754] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.187828] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.187886] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187923] pci 0000:00:04.0: PME# disabled
[ 0.187985] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500
[ 0.188197] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601
[ 0.188258] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.188310] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05
[ 0.188372] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.188411] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.188475] pci 0000:00:09.1: PME# supported from D3hot D3cold
[ 0.188513] pci 0000:00:09.1: PME# disabled
[ 0.188566] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03
[ 0.188608] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.188676] pci 0000:00:0a.0: supports D1 D2
[ 0.188710] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188747] pci 0000:00:0a.0: PME# disabled
[ 0.188793] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03
[ 0.188835] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.188905] pci 0000:00:0a.1: supports D1 D2
[ 0.188938] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.188975] pci 0000:00:0a.1: PME# disabled
[ 0.189026] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101
[ 0.189078] pci 0000:00:0c.0: reg 20: [io 0xf400-0xf40f]
[ 0.189142] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101
[ 0.189184] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7]
[ 0.189222] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.189259] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977]
[ 0.189296] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.189334] pci 0000:00:0d.0: reg 20: [io 0xe000-0xe00f]
[ 0.267684] pnp 00:0a: [mem 0x000cde00-0x000cffff]
[ 0.267719] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 0.267753] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 0.267787] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 0.267821] pnp 00:0a: [mem 0xfefff000-0xfefff0ff]
[ 0.267855] pnp 00:0a: [mem 0xdfeb0000-0xdfefffff]
[ 0.267889] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.267924] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.267958] pnp 00:0a: [mem 0x00100000-0xdfeaffff]
[ 0.268022] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.268056] pnp 00:0a: [mem 0xfefff000-0xfeffffff]
[ 0.268090] pnp 00:0a: [mem 0xfff80000-0xfff80fff]
[ 0.268125] pnp 00:0a: [mem 0xfff90000-0xfffbffff]
[ 0.268303] system 00:0a: [mem 0x000cde00-0x000cffff] has been reserved
[ 0.268341] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.268378] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.268451] system 00:0a: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.268488] system 00:0a: [mem 0xdfeb0000-0xdfefffff] could not be reserved
[ 0.268524] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.268598] system 00:0a: [mem 0x00100000-0xdfeaffff] could not be reserved
[ 0.271811] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.271847] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.271921] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.271957] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.272020] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.272056] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.272101] pnp: PnP ACPI: found 11 devices
[ 0.272134] ACPI: ACPI bus type pnp unregistered
[ 0.279359] PCI: max bus depth: 2 pci_try_num: 3
[ 0.279443] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.279514] pci 0000:00:04.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.279550] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279595] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.279669] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[ 0.279715] pci 0000:03:00.1: PCI bridge to [bus 05-05]
[ 0.279760] pci 0000:00:12.0: PCI bridge to [bus 03-05]
[ 0.279795] pci 0000:00:12.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.279834] pci 0000:00:14.0: PCI bridge to [bus 06-06]
[ 0.279909] pci 0000:00:16.0: PCI bridge to [bus 08-08]
[ 0.279947] pci 0000:00:17.0: PCI bridge to [bus 09-09]
[ 0.279989] pci 0000:00:04.0: setting latency timer to 64
[ 0.279989] pci 0000:00:12.0: setting latency timer to 64
[ 0.279989] pci 0000:03:00.0: setting latency timer to 64
[ 0.279989] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.279989] pci 0000:03:00.1: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.279989] pci 0000:00:14.0: setting latency timer to 64
[ 0.279989] pci 0000:00:15.0: setting latency timer to 64
[ 0.279989] pci 0000:00:17.0: setting latency timer to 64
[ 0.279989] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.279989] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279989] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.279989] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.279989] pci_bus 0000:00: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.279989] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.279989] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279989] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.279989] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.279989] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279989] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.279989] pci_bus 0000:02: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.279989] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.279989] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.280251] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.285307] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.285930] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.286013] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.286100] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.286401] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.286694] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.356039] pci 0000:00:0a.0: PCI INT A disabled
[ 0.356298] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.356421] pci 0000:00:0a.1: PCI INT B disabled
[ 0.356504] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.356582] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.356737] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.356909] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.357007] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.357106] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 0.357211] pci 0000:00:14.0: Enabling HT MSI Mapping
[ 0.357321] pci 0000:00:15.0: Enabling HT MSI Mapping
[ 0.357558] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.357610] pci 0000:01:00.0: Boot video device
[ 0.357750] Unpacking initramfs...
[ 0.753921] Freeing initrd memory: 15676k freed
[ 0.765023] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 0.765057] PCI-DMA: using GART IOMMU.
[ 0.765092] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.769560] type=2000 audit(1341671713.768:1): initialized
[ 0.797956] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.823889] VFS: Disk quotas dquot_6.5.2
[ 0.824104] msgmni has been set to 7926
[ 0.824353] alg: No test for stdrng (krng)
[ 0.824490] io scheduler noop registered
[ 0.824523] io scheduler deadline registered
[ 0.824577] io scheduler cfq registered (default)
[ 0.824860] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.824998] pcieport 0000:00:12.0: setting latency timer to 64
[ 0.825180] pcieport 0000:00:14.0: setting latency timer to 64
[ 0.825237] pcieport 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.825358] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.825535] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.825592] pcieport 0000:00:16.0: irq 44 for MSI/MSI-X
[ 0.825715] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.826008] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.826077] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.826683] ERST: Table is not found!
[ 0.826716] GHES: HEST is not enabled!
[ 0.826824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.920581] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.936267] Linux agpgart interface v0.103
[ 0.936893] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.936933] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.937149] mousedev: PS/2 mouse device common for all mice
[ 0.937423] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.937489] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.937569] cpuidle: using governor menu
[ 0.937823] TCP cubic registered
[ 0.937922] NET: Registered protocol family 10
[ 0.938540] NET: Registered protocol family 17
[ 0.938576] Registering the dns_resolver key type
[ 0.938811] PM: Hibernation image not present or could not be loaded.
[ 0.952189] rtc_cmos 00:04: setting system clock to 2012-07-07 14:35:14 UTC (1341671714)
[ 0.952286] Initializing network drop monitor service
[ 0.954104] Write protecting the kernel read-only data: 6144k
[ 0.957353] Freeing unused kernel memory: 672k freed
[ 0.961159] Freeing unused kernel memory: 684k freed
[ 1.072310] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.072581] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 1.072680] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.077148] usbcore: registered new interface driver usbfs
[ 1.079896] ACPI: Fan [FAN] (on)
[ 1.081914] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.082104] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.082148] ACPI: Power Button [PWRF]
[ 1.101832] usbcore: registered new device driver usb
[ 1.102343] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.105038] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 1.105134] ACPI: [Package] has zero elements (ffff880116fd98c0)
[ 1.105416] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.105451] ACPI: Thermal Zone [THRM] (40 C)
[ 1.109969] wmi: Mapper loaded
[ 1.113487] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.113548] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1.118509] libata version 3.00 loaded.
[ 1.168339] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.178582] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 1.178673] nouveau 0000:01:00.0: setting latency timer to 64
[ 1.181417] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200b1)
[ 1.231071] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.231109] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1.231144] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.50
[ 1.231214] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[ 1.231259] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 1.231306] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 1.231378] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 1.231415] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0c011312 00c00000
[ 1.231488] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 1.231525] [drm] nouveau 0000:01:00.0: 0: 0x00000030: type 0x30 idx 0 tag 0xff
[ 1.231570] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 1.231658] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 1.231703] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 1.231752] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCDED
[ 1.244223] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDB92
[ 1.244281] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD16
[ 1.266245] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 1.266284] [drm] nouveau 0000:01:00.0: 0: core 400MHz shader 400MHz memory 333MHz voltage 1100mV fanspeed 100%
[ 1.266335] [drm] nouveau 0000:01:00.0: c: core 351MHz shader 351MHz memory 265MHz
[ 1.266577] [TTM] Initializing pool allocator.
[ 1.266624] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 1.269712] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.320888] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.320926] [drm] No driver support for vblank timestamp query.
[ 1.321027] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1.321071] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[ 1.321165] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
[ 1.508390] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ffff8801177fa000
[ 1.508892] fbcon: nouveaufb (fb0) is primary device
[ 1.571801] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 1.571804] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 1.573626] fb0: nouveaufb frame buffer device
[ 1.573633] drm: registered panic notifier
[ 1.573644] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 1.596747] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.597053] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20
[ 1.597079] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20
[ 1.668150] firewire_core: created device fw0: GUID 0011d80000c8637e, S400
[ 2.120762] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:08:8e
[ 2.120779] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.120928] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[ 2.120939] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 2.121015] ehci_hcd 0000:00:0a.1: debug port 1
[ 2.121028] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported
[ 2.121238] ehci_hcd 0000:00:0a.1: irq 22, io mem 0xfe02e000
[ 2.132074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.132399] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.132704] usb usb1: Product: EHCI Host Controller
[ 2.133344] usb usb1: SerialNumber: 0000:00:0a.1
[ 2.133926] hub 1-0:1.0: USB hub found
[ 2.134227] hub 1-0:1.0: 10 ports detected
[ 2.135423] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 2.136448] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 2.137109] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[ 2.194039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.194652] usb usb2: Product: OHCI Host Controller
[ 2.194949] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 2.195243] usb usb2: SerialNumber: 0000:00:0a.0
[ 2.196103] hub 2-0:1.0: 10 ports detected
[ 2.196576] sata_nv 0000:00:0d.0: version 3.5
[ 2.197057] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 2.197605] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 2.198353] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 2.199461] scsi1 : sata_nv
[ 2.199873] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 2.200169] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 2.200969] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 2.201234] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 2.202605] scsi2 : sata_nv
[ 2.202962] scsi3 : sata_nv
[ 2.203366] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 2.204144] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 2.204397] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.205324] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 2.206543] scsi4 : sata_nv
[ 2.206905] scsi5 : sata_nv
[ 2.207580] ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 21
[ 2.207933] pata_amd 0000:00:0c.0: version 0.4.1
[ 2.208943] scsi6 : pata_amd
[ 2.209284] scsi7 : pata_amd
[ 2.210025] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.372374] ata7.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[ 2.372658] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 2.388336] ata7.00: configured for UDMA/33
[ 4.586395] vga16fb: initializing
[ 4.587248] fb1: VGA16 VGA frame buffer device
[ 4.593751] device-mapper: uevent: version 1.0.3
[ 4.594304] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.903983] mdadm: sending ioctl 800c0910 to a partition!
[ 4.904321] mdadm: sending ioctl 800c0910 to a partition!
[ 4.904598] mdadm: sending ioctl 1261 to a partition!
[ 4.905375] mdadm: sending ioctl 1261 to a partition!
[ 4.905654] mdadm: sending ioctl 1261 to a partition!
[ 4.906372] mdadm: sending ioctl 1261 to a partition!
[ 4.906786] mdadm: sending ioctl 1261 to a partition!
[ 4.907020] mdadm: sending ioctl 1261 to a partition!
[ 4.964992] md: bind<sdb1>
[ 4.965479] md: bind<sda1>
[ 4.967793] bio: create slab <bio-1> at 1
[ 4.968441] md0: detected capacity change from 0 to 98566144
[ 4.970493] md0: unknown partition table
[ 5.003412] md: bind<sdb3>
[ 5.003865] md: bind<sda3>
[ 5.007017] md/raid1:md1: not clean -- starting background reconstruction
[ 5.007252] md/raid1:md1: active with 2 out of 2 mirrors
[ 5.007495] md1: detected capacity change from 0 to 79998943232
[ 5.009543] md1: unknown partition table
[ 5.051580] md: md2 stopped.
[ 5.055382] md: bind<sdb4>
[ 5.086200] md: bind<sda4>
[ 5.088208] md/raid1:md2: active with 2 out of 2 mirrors
[ 5.088459] md2: detected capacity change from 0 to 237973733376
[ 5.107091] md2: unknown partition table
[ 5.127847] md: md3 stopped.
[ 5.130938] md: bind<sdd1>
[ 5.131436] md: bind<sdc1>
[ 5.133905] md/raid1:md3: not clean -- starting background reconstruction
[ 5.134111] md/raid1:md3: active with 2 out of 2 mirrors
[ 5.134335] md3: detected capacity change from 0 to 2000395101184
[ 5.140878] md3: unknown partition table
[ 5.224530] PM: Starting manual resume from disk
[ 5.224749] PM: Hibernation image partition 8:2 present
[ 5.224949] PM: Looking for hibernation image.
[ 5.225413] PM: Image not found (code -22)
[ 5.225637] PM: Hibernation image not present or could not be loaded.
[ 5.232720] REISERFS (device md1): found reiserfs format "3.6" with standard journal
[ 5.232957] REISERFS (device md1): using ordered data mode
[ 5.233165] reiserfs: using flush barriers
[ 5.243655] REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.245332] REISERFS (device md1): checking transaction log (md1)
[ 5.270097] md: resync of RAID array md1
[ 5.270491] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 5.270737] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 5.271128] md: using 128k window, over a total of 78123968k.
[ 5.676324] REISERFS (device md1): replayed 18 transactions in 1 seconds
[ 6.603127] REISERFS (device md1): Using r5 hash to sort names
[ 8.781086] udevd[498]: starting version 175
[ 10.098632] EDAC MC: Ver: 2.1.0
[ 10.183838] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.311111] parport_pc 00:08: reported by Plug and Play ACPI
[ 10.311544] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 10.326366] MCE: In-kernel MCE decoding enabled.
[ 10.379496] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 10.469445] scsi_verify_blk_ioctl: 408 callbacks suppressed
[ 10.469804] mdadm: sending ioctl 1261 to a partition!
[ 10.470130] mdadm: sending ioctl 1261 to a partition!
[ 10.471603] mdadm: sending ioctl 1261 to a partition!
[ 10.471947] mdadm: sending ioctl 1261 to a partition!
[ 10.472693] mdadm: sending ioctl 1261 to a partition!
[ 10.473032] mdadm: sending ioctl 1261 to a partition!
[ 10.512207] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.574571] AMD64 EDAC driver v3.4.0
[ 10.574994] EDAC amd64: DRAM ECC disabled.
[ 10.575329] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 10.575331] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 10.575332] (Note that use of the override may cause unknown side effects.)
[ 10.735186] ACPI: resource nForce2_smbus [io 0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
[ 10.735508] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.736095] i2c i2c-3: nForce2 SMBus adapter at 0x1c40
[ 11.268592] udevd[589]: renamed network interface eth0 to rename2
[ 11.280518] udevd[591]: renamed network interface eth1 to eth2
[ 11.324544] udevd[589]: renamed network interface rename2 to eth1
[ 12.149207] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 12.149529] snd_hda_intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 12.149826] hda_intel: msi for device 1043:81f6 set to 0
[ 12.150179] snd_hda_intel 0000:00:0e.1: setting latency timer to 64
[ 13.065696] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/input/input6
[ 13.120771] mdadm: sending ioctl 800c0910 to a partition!
[ 13.121102] mdadm: sending ioctl 800c0910 to a partition!
[ 13.121431] mdadm: sending ioctl 1261 to a partition!
[ 13.121725] mdadm: sending ioctl 1261 to a partition!
[ 16.101686] scsi_verify_blk_ioctl: 156 callbacks suppressed
[ 24.816411] scsi_verify_blk_ioctl: 606 callbacks suppressed
[ 24.817009] mdadm: sending ioctl 1261 to a partition!
[ 24.817570] mdadm: sending ioctl 1261 to a partition!
[ 25.400060] mdadm: sending ioctl 1261 to a partition!
[ 25.400669] mdadm: sending ioctl 1261 to a partition!
[ 25.512429] mdadm: sending ioctl 1261 to a partition!
[ 25.513041] mdadm: sending ioctl 1261 to a partition!
[ 25.724401] md: resync of RAID array md3
[ 25.725031] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 25.725632] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 25.726239] md: using 128k window, over a total of 1953510841k.
[ 25.873994] mdadm: sending ioctl 1261 to a partition!
[ 25.874682] mdadm: sending ioctl 1261 to a partition!
[ 25.914185] mdadm: sending ioctl 1261 to a partition!
[ 25.914845] mdadm: sending ioctl 1261 to a partition!
[ 26.166855] kjournald starting. Commit interval 5 seconds
[ 26.184234] EXT3-fs (md0): using internal journal
[ 26.184878] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 26.186317] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 26.187004] REISERFS (device md2): using ordered data mode
[ 26.187629] reiserfs: using flush barriers
[ 26.188890] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 26.192746] REISERFS (device md2): checking transaction log (md2)
[ 26.305382] REISERFS (device md2): Using r5 hash to sort names
[ 26.339864] REISERFS (device md3): found reiserfs format "3.6" with standard journal
[ 26.340685] REISERFS (device md3): using ordered data mode
[ 26.341331] reiserfs: using flush barriers
[ 26.343201] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 26.346956] REISERFS (device md3): checking transaction log (md3)
[ 26.419336] REISERFS (device md3): Using r5 hash to sort names
[ 28.890927] RPC: Registered named UNIX socket transport module.
[ 28.891632] RPC: Registered udp transport module.
[ 28.892329] RPC: Registered tcp transport module.
[ 28.892970] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.966449] FS-Cache: Loaded
[ 29.026572] FS-Cache: Netfs 'nfs' registered for caching
[ 29.053368] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 30.112028] eth1: no IPv6 routers present
[ 33.007517] fuse init (API version 7.17)
[ 37.166857] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X
[ 39.140228] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 42.219012] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 42.239104] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 42.288865] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 42.288878] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 47.672044] eth2: no IPv6 routers present
[ 50.073845] Bluetooth: Core ver 2.16
[ 50.073923] NET: Registered protocol family 31
[ 50.073933] Bluetooth: HCI device and connection manager initialized
[ 50.073956] Bluetooth: HCI socket layer initialized
[ 50.073966] Bluetooth: L2CAP socket layer initialized
[ 50.077682] Bluetooth: SCO socket layer initialized
[ 50.247688] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 50.247713] Bluetooth: BNEP filters: protocol multicast
[ 50.425167] Bluetooth: RFCOMM TTY layer initialized
[ 50.425196] Bluetooth: RFCOMM socket layer initialized
[ 50.425207] Bluetooth: RFCOMM ver 1.11
[ 59.543851] lp0: using parport0 (interrupt-driven).
[ 59.646598] ppdev: user-space parallel port driver
[ 95.739002] postgres (6113): /proc/6113/oom_adj is deprecated, please use /proc/6113/oom_score_adj instead.
[ 103.269832] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 104.880376] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 105.985997] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 105.986091] NFSD: starting 90-second grace period
[ 734.890288] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1616.181418] /build/buildd-linux_3.2.20-1-amd64-lTzScn/linux-3.2.20/mm/memory.c:408: bad pud ffff8800d94bcf78(00000000d0211031).
[ 1616.181440] /build/buildd-linux_3.2.20-1-amd64-lTzScn/linux-3.2.20/mm/memory.c:402: bad pgd ffff8800d016f7f8(00000000d02de073).
[ 1616.181500] ------------[ cut here ]------------
[ 1616.181786] kernel BUG at /build/buildd-linux_3.2.20-1-amd64-lTzScn/linux-3.2.20/mm/mmap.c:2274!
[ 1616.181801] invalid opcode: 0000 [#1] SMP
[ 1616.181815] CPU 0
[ 1616.181821] Modules linked in: snd_hrtimer ip6table_filter ip6_tables iptable_filter ip_tables x_tables(P) cpufreq_stats[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 17:24:18 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32 WS Professional, BIOS ASUS M2N32 WS Pro ACPI BIOS Revision 2001 05/05/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6040] f6040
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfeb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeaa000-dfeb0000
[ 0.000000] RAMDISK: 36152000 - 370a1000
[ 0.000000] ACPI: RSDP 00000000000f7f20 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000dfeeb480 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000dfee3280 08189 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000dfeb0000 00040
[ 0.000000] ACPI: TCPA 00000000dfeeb6c0 00032 (v01 HTC HTCACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000dfeeb740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000dfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000dfeeb5c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031994
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ d4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000
[ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
[ 0.000000] Memory: 3976876k/4718592k available (3407k kernel code, 526084k absent, 215632k reserved, 3326k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2209.958 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.91 BogoMIPS (lpj=8839832)
[ 0.008107] pid_max: default: 32768 minimum: 301
[ 0.008199] Security Framework initialized
[ 0.008235] AppArmor: AppArmor disabled by boot time parameter
[ 0.012394] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014990] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.016374] Mount-cache hash table entries: 256
[ 0.016574] Initializing cgroup subsys cpuacct
[ 0.016612] Initializing cgroup subsys memory
[ 0.016660] Initializing cgroup subsys devices
[ 0.016694] Initializing cgroup subsys freezer
[ 0.016729] Initializing cgroup subsys net_cls
[ 0.016762] Initializing cgroup subsys blkio
[ 0.016805] Initializing cgroup subsys perf_event
[ 0.016870] tseg: 00dff00000
[ 0.016903] CPU: Physical Processor ID: 0
[ 0.016935] CPU: Processor Core ID: 0
[ 0.016968] mce: CPU supports 5 MCE banks
[ 0.017009] using AMD E400 aware idle routine
[ 0.017373] ACPI: Core revision 20110623
[ 0.024499] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.064240] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 9a000
[ 0.156088] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156145] Brought up 2 CPUs
[ 0.156178] Total of 2 processors activated (8840.31 BogoMIPS).
[ 0.156717] devtmpfs: initialized
[ 0.160266] PM: Registering ACPI NVS region at dfeb0000 (208896 bytes)
[ 0.160266] print_constraints: dummy:
[ 0.160360] NET: Registered protocol family 16
[ 0.160521] node 0 link 0: io port [a000, ffff]
[ 0.160556] TOM: 00000000e0000000 aka 3584M
[ 0.160589] node 0 link 0: mmio [a0000, bffff]
[ 0.160645] node 0 link 0: mmio [e0000000, efffffff]
[ 0.160700] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.160755] node 0 link 0: mmio [f0000000, f09fffff]
[ 0.160811] TOM2: 0000000120000000 aka 4608M
[ 0.160844] bus: [00, 09] on node 0 link 0
[ 0.160879] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.160912] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.160947] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff]
[ 0.160981] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[ 0.161015] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[ 0.161058] ACPI: bus type pci registered
[ 0.161171] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.161217] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.168043] PCI: Using configuration type 1 for base access
[ 0.168925] bio: create slab <bio-0> at 0
[ 0.168925] ACPI: Added _OSI(Module Device)
[ 0.168925] ACPI: Added _OSI(Processor Device)
[ 0.168925] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.168925] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169417] ACPI: EC: Look up EC in DSDT
[ 0.178247] ACPI: Interpreter enabled
[ 0.178289] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.178453] ACPI: Using IOAPIC for interrupt routing
[ 0.186308] ACPI: No dock devices found.
[ 0.186345] HEST: Table not found.
[ 0.186380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.186682] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.186719] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.186754] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.186798] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.186841] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470c]
[ 0.186876] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.186920] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.186964] pci_root PNP0A08:00: host bridge window expanded to [io 0x0d00-0xffff]; [io 0x4700-0x470c] ignored
[ 0.187023] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500
[ 0.187099] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.187162] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.187232] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.187301] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.187370] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.187436] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.187496] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.187570] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.267742] pnp 00:0a: [mem 0xfff90000-0xfffbffff]
[ 0.267776] pnp 00:0a: [mem 0xfffed000-0xfffeffff]
[ 0.267919] system 00:0a: [mem 0x000cde00-0x000cffff] has been reserved
[ 0.267956] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.267993] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.268021] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.268058] system 00:0a: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.268095] system 00:0a: [mem 0xdfeb0000-0xdfefffff] could not be reserved
[ 0.268168] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.268205] system 00:0a: [mem 0x00100000-0xdfeaffff] could not be reserved
[ 0.271420] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.271493] system 00:0a: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.271530] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.271602] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.271639] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.271684] pnp: PnP ACPI: found 11 devices
[ 0.278887] Switching to clocksource acpi_pm
[ 0.279157] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279202] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.279237] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.279321] pci 0000:03:00.1: PCI bridge to [bus 05-05]
[ 0.279367] pci 0000:00:12.0: PCI bridge to [bus 03-05]
[ 0.279402] pci 0000:00:12.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.279478] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[ 0.279516] pci 0000:00:16.0: PCI bridge to [bus 08-08]
[ 0.279596] pci 0000:00:04.0: setting latency timer to 64
[ 0.279633] pci 0000:00:0e.0: setting latency timer to 64
[ 0.279711] pci 0000:03:00.0: setting latency timer to 64
[ 0.279962] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.279962] pci 0000:03:00.1: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.279962] pci 0000:00:14.0: setting latency timer to 64
[ 0.279962] pci 0000:00:15.0: setting latency timer to 64
[ 0.279962] pci 0000:00:17.0: setting latency timer to 64
[ 0.279962] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.279962] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.279962] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.279962] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.279962] pci_bus 0000:00: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.279962] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.279962] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279962] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.279962] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.279962] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279962] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.279962] pci_bus 0000:02: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.279962] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.279962] NET: Registered protocol family 2
[ 0.279962] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.285305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.285928] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.286011] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.286098] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.286399] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.286692] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.286741] pci 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 0.356299] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.356351] pci 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.356421] pci 0000:00:0a.1: PCI INT B disabled
[ 0.356583] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.356660] pci 0000:00:0d.2: Enabling HT MSI Mapping
[ 0.356738] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.356911] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.357008] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.357213] pci 0000:00:14.0: Enabling HT MSI Mapping
[ 0.357323] pci 0000:00:15.0: Enabling HT MSI Mapping
[ 0.357560] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.357612] pci 0000:01:00.0: Boot video device
[ 0.357752] Unpacking initramfs...
[ 0.753921] Freeing initrd memory: 15676k freed
[ 0.764893] PCI-DMA: Disabling AGP.
[ 0.765023] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 0.765093] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.769505] audit: initializing netlink socket (disabled)
[ 0.797947] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.823890] VFS: Disk quotas dquot_6.5.2
[ 0.823966] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.824358] alg: No test for stdrng (krng)
[ 0.824449] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.824529] io scheduler deadline registered
[ 0.824583] io scheduler cfq registered (default)
[ 0.824804] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.825004] pcieport 0000:00:12.0: setting latency timer to 64
[ 0.825063] pcieport 0000:00:12.0: irq 41 for MSI/MSI-X
[ 0.825243] pcieport 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.825364] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.825420] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 0.825598] pcieport 0000:00:16.0: irq 44 for MSI/MSI-X
[ 0.825721] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.826014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.826083] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.826118] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.826722] GHES: HEST is not enabled!
[ 0.826830] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.847242] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.940267] Linux agpgart interface v0.103
[ 0.940447] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.940935] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.941150] mousedev: PS/2 mouse device common for all mice
[ 0.941242] rtc_cmos 00:04: RTC can wake from S4
[ 0.941423] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.941536] cpuidle: using governor ladder
[ 0.941570] cpuidle: using governor menu
[ 0.941923] NET: Registered protocol family 10
[ 0.942509] Mobile IPv6
[ 0.942577] Registering the dns_resolver key type
[ 0.942815] PM: Hibernation image not present or could not be loaded.
[ 0.942860] registered taskstats version 1
[ 0.956285] Initializing network drop monitor service
[ 0.957828] Freeing unused kernel memory: 572k freed
[ 0.961352] Freeing unused kernel memory: 672k freed
[ 0.965155] Freeing unused kernel memory: 684k freed
[ 0.990005] udevd[96]: starting version 175
[ 1.059581] usbcore: registered new interface driver usbfs
[ 1.059645] usbcore: registered new interface driver hub
[ 1.079407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.079993] [drm] Initialized drm 1.1.0 20060810
[ 1.080042] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.080387] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
[ 1.080434] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.083138] ACPI: Power Button [PWRB]
[ 1.083272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.083316] ACPI: Power Button [PWRF]
[ 1.093712] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 1.093807] ACPI: [Package] has zero elements (ffff8801180f29c0)
[ 1.093842] ACPI: Invalid passive threshold
[ 1.094111] ACPI: Thermal Zone [THRM] (40 C)
[ 1.099322] ACPI: Fan [FAN] (on)
[ 1.112299] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.112363] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1.160157] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 1.160200] nouveau 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 1.161694] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200b1)
[ 1.163636] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 1.212206] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.212280] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.50
[ 1.212316] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[ 1.212394] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 1.212439] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 1.212476] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000302 00000000
[ 1.212512] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 1.212584] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 020223f1 0040c083
[ 1.212621] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 1.212658] [drm] nouveau 0000:01:00.0: 0: 0x00000030: type 0x30 idx 0 tag 0xff
[ 1.212746] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 1.212790] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 1.212881] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCDED
[ 1.213177] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD497
[ 1.225402] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD16
[ 1.228569] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF22
[ 1.228674] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.247467] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 1.247557] [drm] nouveau 0000:01:00.0: c: core 351MHz shader 351MHz memory 265MHz
[ 1.247762] [TTM] Zone kernel: Available graphics memory: 2030216 kiB.
[ 1.247798] [TTM] Initializing pool allocator.
[ 1.250820] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.250972] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 1.302368] [drm] No driver support for vblank timestamp query.
[ 1.302415] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 1.302468] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1.302560] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 1.302604] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
[ 1.488385] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ffff880117004400
[ 1.502202] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 1.551824] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 1.552740] Console: switching to colour frame buffer device 128x48
[ 1.553643] fb0: nouveaufb frame buffer device
[ 1.553660] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 1.604743] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:06:5d
[ 1.604766] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.605098] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20
[ 1.605112] forcedeth 0000:00:11.0: setting latency timer to 64
[ 2.128767] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:08:8e
[ 2.128783] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.128883] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 2.128939] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 2.128976] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 2.129026] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported
[ 2.129058] ehci_hcd 0000:00:0a.1: irq 22, io mem 0xfe02e000
[ 2.140070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.140395] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.140701] usb usb1: Product: EHCI Host Controller
[ 2.141340] usb usb1: SerialNumber: 0000:00:0a.1
[ 2.141915] hub 1-0:1.0: USB hub found
[ 2.142216] hub 1-0:1.0: 10 ports detected
[ 2.143119] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 2.143471] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 2.145034] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[ 2.202029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.202331] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.202913] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 2.203208] usb usb2: SerialNumber: 0000:00:0a.0
[ 2.204074] hub 2-0:1.0: 10 ports detected
[ 2.204558] sata_nv 0000:00:0d.0: version 3.5
[ 2.205034] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 2.205582] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 2.206333] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 2.207968] scsi1 : sata_nv
[ 2.208417] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 2.208682] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 2.209512] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 2.209778] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 2.211147] scsi2 : sata_nv
[ 2.211504] scsi3 : sata_nv
[ 2.211905] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 2.212706] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 2.212963] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.213898] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 2.214934] scsi5 : sata_nv
[ 2.215328] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 21
[ 2.215582] ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 21
[ 2.216452] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 2.217128] scsi6 : pata_amd
[ 2.217486] scsi7 : pata_amd
[ 2.218464] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.380397] ata7.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[ 25.849842] netconsole: network logging started
[ 27.486605] scsi_verify_blk_ioctl: 606 callbacks suppressed
[ 27.487204] mdadm: sending ioctl 1261 to a partition!
[ 27.487753] mdadm: sending ioctl 1261 to a partition!
[ 28.023058] mdadm: sending ioctl 1261 to a partition!
[ 28.023671] mdadm: sending ioctl 1261 to a partition!
[ 28.136389] mdadm: sending ioctl 1261 to a partition!
[ 28.137012] mdadm: sending ioctl 1261 to a partition!
[ 28.355480] md: resync of RAID array md3
[ 28.356130] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 28.356718] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 28.357316] md: using 128k window, over a total of 1953510841k.
[ 28.515777] mdadm: sending ioctl 1261 to a partition!
[ 28.516509] mdadm: sending ioctl 1261 to a partition!
[ 28.559754] mdadm: sending ioctl 1261 to a partition!
[ 28.560516] mdadm: sending ioctl 1261 to a partition!
[ 28.795289] kjournald starting. Commit interval 5 seconds
[ 28.811559] EXT3-fs (md0): using internal journal
[ 28.812260] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 28.813711] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 28.814426] REISERFS (device md2): using ordered data mode
[ 28.815055] reiserfs: using flush barriers
[ 28.827101] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 28.830847] REISERFS (device md2): checking transaction log (md2)
[ 28.927092] REISERFS (device md2): Using r5 hash to sort names
[ 28.960082] REISERFS (device md3): found reiserfs format "3.6" with standard journal
[ 28.960884] REISERFS (device md3): using ordered data mode
[ 28.961534] reiserfs: using flush barriers
[ 28.963355] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 28.967047] REISERFS (device md3): checking transaction log (md3)
[ 29.044084] REISERFS (device md3): Using r5 hash to sort names
[ 31.587099] RPC: Registered named UNIX socket transport module.
[ 31.587946] RPC: Registered udp transport module.
[ 31.588668] RPC: Registered tcp transport module.
[ 31.589460] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 31.685078] FS-Cache: Loaded
[ 31.743118] FS-Cache: Netfs 'nfs' registered for caching
[ 31.769897] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 32.304038] eth1: no IPv6 routers present
[ 35.427397] fuse init (API version 7.17)
[ 39.262157] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X
[ 41.311436] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 43.835917] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 43.856519] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 43.906366] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 43.906382] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 49.808044] eth2: no IPv6 routers present
[ 52.169224] Bluetooth: Core ver 2.16
[ 52.169319] NET: Registered protocol family 31
[ 52.169328] Bluetooth: HCI device and connection manager initialized
[ 52.169347] Bluetooth: HCI socket layer initialized
[ 52.169354] Bluetooth: L2CAP socket layer initialized
[ 52.169756] Bluetooth: SCO socket layer initialized
[ 52.335567] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 52.335592] Bluetooth: BNEP filters: protocol multicast
[ 52.516674] Bluetooth: RFCOMM TTY layer initialized
[ 52.516739] Bluetooth: RFCOMM socket layer initialized
[ 52.516747] Bluetooth: RFCOMM ver 1.11
[ 59.997467] lp0: using parport0 (interrupt-driven).
[ 60.065884] ppdev: user-space parallel port driver
[ 101.741296] postgres (6222): /proc/6222/oom_adj is deprecated, please use /proc/6222/oom_score_adj instead.
[ 109.014991] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 109.879052] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 110.682594] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 110.682649] NFSD: starting 90-second grace period
[ 737.278676] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1701.575255] md: md1: resync done.
[ 1701.625989] RAID1 conf printout:
[ 1701.626016] --- wd:2 rd:2
[ 1701.626043] disk 0, wo:0, o:1, dev:sda3
[ 1701.626052] disk 1, wo:0, o:1, dev:sdb3
[24814.861219] md: md3: resync done.
[24814.992358] RAID1 conf printout:
[24814.992396] --- wd:2 rd:2
[24814.992424] disk 0, wo:0, o:1, dev:sdc1
[24814.992432] disk 1, wo:0, o:1, dev:sdd1
[67988.684418] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
Reply to: