[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#680649: linux-image-3.0.0-1-amd64: Restoring from hibernate requires rerunning /etc/init.d/kbd start manually to fix broken consoles



Package: linux-2.6
Version: 3.0.0-3
Severity: important

Dear Maintainer,

I have some nonstandard console settings that require running /etc/init.d/kbd to configure console.
Using the newer console-setup is a non-starter for reasons that are not relevant at this time.

Somewhere in the last two months (it's hard to tell exactly), there was a regression such that
after restoring from hibernate, some console settings are not restored correctly. Running
/etc/init.d/kbd start successfully restores them.

Bug might be related to #647153. I had to reapply my original patch as the maintainer patch did not work for me.

-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-3) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP Sat Aug 27 16:21:11 UTC 2011

** Command line:
auto BOOT_IMAGE=Lin ro root=801 resume=/dev/sda5

** Tainted: PO (4097)
 * Proprietary module has been loaded.
 * Out-of-tree module has been loaded.

** Kernel log:
[98776.388039] sr 0:0:0:0: [sr0]  Add. Sense: Read of scrambled sector without authentication
[98776.388047] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 04 00 00 00 02 00
[98776.388055] end_request: I/O error, dev sr0, sector 4096
[98776.388060] Buffer I/O error on device sr0, logical block 512
[104211.293746] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[104211.293752] PM: Marking nosave pages: 00000000d7f90000 - 0000000100000000
[104211.294608] PM: Marking nosave pages: 00000000cc000000 - 00000000d0000000
[104211.294861] PM: Basic memory bitmaps created
[104211.294863] PM: Syncing filesystems ... done.
[104211.307845] Freezing user space processes ... (elapsed 0.01 seconds) done.
[104211.324293] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[104211.340610] PM: Preallocating image memory... done (allocated 474682 pages)
[104211.663624] PM: Allocated 1898728 kbytes in 0.32 seconds (5933.52 MB/s)
[104211.663662] Suspending console(s) (use no_console_suspend to debug)
[104211.663869] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[104211.663960] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[104211.664466] serial 00:0b: disabled
[104211.664473] serial 00:0b: wake-up capability disabled by ACPI
[104211.664796] parport_pc 00:05: disabled
[104211.665152] ata2: port disabled. ignoring.
[104211.896227] HDA Intel 0000:00:07.0: PCI INT A disabled
[104211.912255] HDA Intel 0000:00:07.0: power state changed by ACPI to D3
[104211.912289] PM: freeze of devices complete after 248.581 msecs
[104211.912873] PM: late freeze of devices complete after 0.580 msecs
[104211.912940] ACPI: Preparing to enter system sleep state S4
[104211.914039] PM: Saving platform NVS memory
[104211.914644] Disabling non-boot CPUs ...
[104211.916090] CPU 1 is now offline
[104211.916791] PM: Creating hibernation image:
[104211.920062] PM: Need to copy 475120 pages
[104211.920062] PM: Normal pages needed: 475120 + 1024, available pages: 1572515
[104211.920062] PM: Restoring platform NVS memory
[104211.920062] PCI-DMA: Resuming GART IOMMU
[104211.920062] PCI-DMA: Restoring GART aperture settings
[104211.920062] Enabling non-boot CPUs ...
[104211.920062] Booting Node 0 Processor 1 APIC 0x1
[104211.920062] smpboot cpu 1: start_ip = 99000
[104211.916052] Switch to broadcast mode on CPU1
[104212.008348] NMI watchdog enabled, takes one hw-pmu counter.
[104212.012222] Switched to NOHz mode on CPU #1
[104212.012272] CPU1 is up
[104212.012626] ACPI: Waking up from system sleep state S4
[104212.014256] pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
[104212.014280] HDA Intel 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[104212.014365] ahci 0000:00:09.0: restoring config space at offset 0x1 (was 0xb00503, writing 0xb00507)
[104212.014871] nvidia 0000:02:00.0: restoring config space at offset 0xc (was 0xfebe0000, writing 0x0)
[104212.014878] nvidia 0000:02:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
[104212.014978] PM: early restore of devices complete after 1.064 msecs
[104212.151091] ohci_hcd 0000:00:02.0: setting latency timer to 64
[104212.151132] ehci_hcd 0000:00:02.1: setting latency timer to 64
[104212.151148] ohci_hcd 0000:00:04.0: setting latency timer to 64
[104212.151158] ehci_hcd 0000:00:04.1: setting latency timer to 64
[104212.151172] pata_amd 0000:00:06.0: setting latency timer to 64
[104212.151239] pci 0000:00:08.0: setting latency timer to 64
[104212.151248] ahci 0000:00:09.0: setting latency timer to 64
[104212.151545] pci 0000:00:0b.0: setting latency timer to 64
[104212.152768] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[104212.152774] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[104212.152780] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[104212.152784] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[104212.152793] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[104212.152798] HDA Intel 0000:00:07.0: setting latency timer to 64
[104212.154231] ata2: port disabled. ignoring.
[104212.155346] parport_pc 00:05: activated
[104212.156548] serial 00:0b: activated
[104212.157140] sd 2:0:0:0: [sda] Starting disk
[104212.157204] sd 4:0:0:0: [sdb] Starting disk
[104212.210022] usb usb4: root hub lost power or was reset
[104212.210047] usb usb2: root hub lost power or was reset
[104212.210056] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[104212.212058] usb usb3: root hub lost power or was reset
[104212.213763] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[104212.213978] forcedeth 0000:00:0a.0: eth0: no link during initialization
[104212.214316] usb usb1: root hub lost power or was reset
[104212.214326] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[104212.316563] ata1.01: ACPI cmd ef/03:21:00:00:00:b0 (SET FEATURES) filtered out
[104212.316568] ata1.01: ACPI cmd ef/03:01:00:00:00:b0 (SET FEATURES) filtered out
[104212.316572] ata1.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[104212.324512] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[104212.324518] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[104212.324530] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:120:0x11)
[104212.324535] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc5000000) ACPI=0x39f (30:120:0x11)
[104212.340434] ata1.00: configured for UDMA/66
[104212.356490] ata1.01: configured for MWDMA2
[104212.472213] ata7: SATA link down (SStatus 0 SControl 300)
[104212.472228] ata8: SATA link down (SStatus 0 SControl 300)
[104212.472242] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[104212.472254] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[104212.474387] ata3.00: configured for UDMA/133
[104212.475068] ata5.00: configured for UDMA/133
[104212.476212] ata4: SATA link down (SStatus 0 SControl 300)
[104212.476226] ata6: SATA link down (SStatus 0 SControl 300)
[104212.836222] usb 3-1: reset low speed USB device number 2 using ohci_hcd
[104213.504218] usb 4-1: reset low speed USB device number 2 using ohci_hcd
[104213.863288] PM: restore of devices complete after 1712.271 msecs
[104213.865842] PM: Image restored successfully.
[104213.865844] Restarting tasks ... done.
[104213.869238] PM: Basic memory bitmaps freed
[104213.869246] video LNXVIDEO:00: Restoring backlight state
[104214.907483] forcedeth 0000:00:0a.0: eth0: link up

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1009   
board_vendor: ASUSTeK Computer INC.
board_name: M3N78-VM
board_version: Rev X.0x

** Loaded modules:
Module                  Size  Used by
snd_seq_dummy          12503  0 
sha1_generic           12575  0 
arc4                   12458  0 
ecb                    12737  0 
ppp_mppe               12968  0 
ppp_async              17398  0 
crc_ccitt              12347  1 ppp_async
ppp_generic            26709  2 ppp_async,ppp_mppe
slhc                   12670  1 ppp_generic
pci_stub               12429  1 
vboxpci                19059  0 
vboxnetadp             25490  0 
vboxnetflt             23595  0 
vboxdrv               194320  3 vboxnetflt,vboxnetadp,vboxpci
binfmt_misc            13040  1 
uinput                 17469  1 
fuse                   66430  1 
snd_hda_codec_hdmi     26321  1 
snd_hda_codec_via      56995  1 
nvidia              12288281  40 
snd_hda_intel          26140  2 
snd_hda_codec          72699  3 snd_hda_intel,snd_hda_codec_via,snd_hda_codec_hdmi
snd_hwdep              13186  1 snd_hda_codec
snd_pcm_oss            41257  0 
snd_mixer_oss          17969  1 snd_pcm_oss
snd_pcm                68104  4 snd_pcm_oss,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc         13043  2 snd_pcm,snd_hda_intel
snd_seq_midi           12848  0 
snd_seq_midi_event     13316  1 snd_seq_midi
snd_rawmidi            23297  1 snd_seq_midi
snd_seq                45208  3 snd_seq_midi_event,snd_seq_midi,snd_seq_dummy
snd_seq_device         13137  4 snd_seq,snd_rawmidi,snd_seq_midi,snd_seq_dummy
snd_timer              22581  2 snd_seq,snd_pcm
snd                    52823  16 snd_timer,snd_seq_device,snd_seq,snd_rawmidi,snd_pcm,snd_mixer_oss,snd_pcm_oss,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_via,snd_hda_codec_hdmi
i2c_nforce2            12584  0 
i2c_core               23909  2 i2c_nforce2,nvidia
shpchp                 31343  0 
pci_hotplug            27232  1 shpchp
soundcore              13152  1 snd
k8temp                 12531  0 
edac_mce_amd           17103  0 
edac_core              35343  0 
mxm_wmi                12473  0 
asus_atk0110           17294  0 
psmouse                55656  0 
evdev                  17558  11 
processor              27942  0 
video                  17707  0 
thermal_sys            17949  2 video,processor
button                 12930  0 
parport_pc             22395  0 
parport                31929  1 parport_pc
wmi                    13243  1 mxm_wmi
serio_raw              12846  0 
ext3                  114399  3 
mbcache                13066  1 ext3
jbd                    43355  1 ext3
usbhid                 40516  0 
hid                    73172  1 usbhid
sd_mod                 36259  6 
sr_mod                 21811  0 
cdrom                  35093  1 sr_mod
crc_t10dif             12348  1 sd_mod
ata_generic            12479  0 
floppy                 53265  0 
ohci_hcd               26576  0 
ahci                   25089  4 
libahci                22767  1 ahci
pata_amd               13276  0 
libata                149043  4 pata_amd,libahci,ahci,ata_generic
ehci_hcd               40090  0 
scsi_mod              162442  3 libata,sr_mod,sd_mod
usbcore               128338  4 ehci_hcd,ohci_hcd,usbhid
forcedeth              49427  0 

** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: I/O ports at 0900 [size=256]

00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 0e00 [size=64]
	Region 4: I/O ports at 0600 [size=64]
	Region 5: I/O ports at 0700 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus

00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at fcf80000 (32-bit, non-prefetchable) [size=512K]

00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fcf7e000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:02.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at fcf7fc00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fcf7d000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:04.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at fcf7f800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:06.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_amd

00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8345]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at fcf78000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:09.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 40
	Region 0: I/O ports at d480 [size=8]
	Region 1: I/O ports at d400 [size=4]
	Region 2: I/O ports at d080 [size=8]
	Region 3: I/O ports at d000 [size=4]
	Region 4: I/O ports at cc00 [size=16]
	Region 5: Memory at fcf76000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP77 Ethernet [10de:0760] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at fcf7c000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at c880 [size=8]
	Region 2: Memory at fcf7f400 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fcf7f000 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth

00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fd000000-febfffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000fbffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:12.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp

02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C77 [GeForce 8200] [10de:0849] (rev a2) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at f0000000 (64-bit, prefetchable) [size=128M]
	Region 3: Memory at fa000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at ec00 [size=128]
	[virtual] Expansion ROM at febe0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0461:4d15 Primax Electronics, Ltd Dell Optical Mouse
Bus 004 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.44
it  initramfs-tools [linux-initramfs-tool]  0.106
ii  linux-base                              3.5
ii  module-init-tools                       8-2

Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii  firmware-linux-free  3.1

Versions of packages linux-image-3.0.0-1-amd64 suggests:
ii  lilo             1:23.2-4
pn  linux-doc-3.0.0  <none>

Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
  linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
  linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
  linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:



Reply to: