Bug#679391: linux-source-3.2: cifs mount of a subfolder of a Windows 2003 Server share need access rights for the share itself
Package: linux-source-3.2
Version: 3.2.18-1
Severity: important
Tags: upstream
With kernel 3.2.xx you will no longer be able to mount a subfolder of a
Windows 2003 Server share if you don't have access right to the share itself
(of course the user must have access rights to the subfolder).
This is also a problem when using some NAS Devices, which give a user only
access rights to a subfolder of a share.
The reason of this is known upstream (see the 8 th reply to
http://samba.2283325.n4.nabble.com/Trouble-with-mount-cifs-while-smbclient-
works-Ubuntu-12-04-tp4631671p4631800.html) but doesn't seem to be easily
fixable.
This renders debian in some cases unusable as Windows Client (mounting as
Domain administrator always works ;-)
Reverting back to kernel 2.6.xx fixes the problem!
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.18-1) (debian-
kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Mon May
21 18:24:12 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=7d0b322d-6e57-4fa5-ac58-
ac008dae8ffd ro quiet
** Not tainted
** Kernel log:
[ 10.159150] usbcore: registered new interface driver usbhid
[ 10.159151] usbhid: USB HID core driver
[ 11.560703] Adding 3211260k swap on /dev/sda5. Priority:-1 extents:1
across:3211260k
[ 11.795451] EXT3-fs (sda1): using internal journal
[ 11.912794] loop: module loaded
[ 12.823892] Ebtables v2.0 registered
[ 13.317416] 8021q: 802.1Q VLAN Support v1.8
[ 13.681997] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 13.736043] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 13.736236] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.862058] Bridge firewalling registered
[ 13.879417] device vlan1 entered promiscuous mode
[ 13.880049] device eth0 entered promiscuous mode
[ 13.880233] ADDRCONF(NETDEV_UP): vlan1: link is not ready
[ 13.882638] device vlan100 entered promiscuous mode
[ 13.883291] ADDRCONF(NETDEV_UP): vlan100: link is not ready
[ 13.885681] device vlan102 entered promiscuous mode
[ 13.886331] ADDRCONF(NETDEV_UP): vlan102: link is not ready
[ 13.887056] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 15.124853] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
None
[ 15.124857] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 15.124980] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.125147] ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[ 15.125174] br0: port 1(vlan1) entering forwarding state
[ 15.125177] br0: port 1(vlan1) entering forwarding state
[ 15.125285] ADDRCONF(NETDEV_CHANGE): vlan100: link becomes ready
[ 15.125311] br0: port 2(vlan100) entering forwarding state
[ 15.125313] br0: port 2(vlan100) entering forwarding state
[ 15.125421] ADDRCONF(NETDEV_CHANGE): vlan102: link becomes ready
[ 15.125446] br0: port 3(vlan102) entering forwarding state
[ 15.125449] br0: port 3(vlan102) entering forwarding state
[ 15.125557] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 23.712963] RPC: Registered named UNIX socket transport module.
[ 23.712965] RPC: Registered udp transport module.
[ 23.712966] RPC: Registered tcp transport module.
[ 23.712967] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 23.890762] FS-Cache: Loaded
[ 23.968392] FS-Cache: Netfs 'nfs' registered for caching
[ 24.010018] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 24.924817] fuse init (API version 7.17)
[ 25.472005] br0: no IPv6 routers present
[ 25.544005] eth0: no IPv6 routers present
[ 29.484517] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input7
[ 30.176010] br0: port 1(vlan1) entering forwarding state
[ 30.176021] br0: port 2(vlan100) entering forwarding state
[ 30.176026] br0: port 3(vlan102) entering forwarding state
[ 37.253840] Bluetooth: Core ver 2.16
[ 37.253853] NET: Registered protocol family 31
[ 37.253855] Bluetooth: HCI device and connection manager initialized
[ 37.253857] Bluetooth: HCI socket layer initialized
[ 37.253858] Bluetooth: L2CAP socket layer initialized
[ 37.253864] Bluetooth: SCO socket layer initialized
[ 37.346634] Bluetooth: RFCOMM TTY layer initialized
[ 37.346637] Bluetooth: RFCOMM socket layer initialized
[ 37.346638] Bluetooth: RFCOMM ver 1.11
[ 37.459494] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.459496] Bluetooth: BNEP filters: protocol multicast
[ 39.985509] lp0: using parport0 (interrupt-driven).
[ 40.012031] ppdev: user-space parallel port driver
[ 516.988870] FS-Cache: Netfs 'cifs' registered for caching
[ 517.082845] CIFS VFS: default security mechanism requested. The default
security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
[ 517.109674] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 517.109678] CIFS VFS: Send error in SessSetup = -13
[ 517.111262] CIFS VFS: cifs_mount failed w/return code = -13
[ 517.164819] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 517.164823] CIFS VFS: Send error in SessSetup = -13
[ 517.166757] CIFS VFS: cifs_mount failed w/return code = -13
[ 517.230551] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 517.230556] CIFS VFS: Send error in SessSetup = -13
[ 517.232750] CIFS VFS: cifs_mount failed w/return code = -13
[ 583.785548] CIFS VFS: cifs_read_super: get root inode failed
[ 583.827583] CIFS VFS: cifs_read_super: get root inode failed
[ 583.884606] CIFS VFS: cifs_read_super: get root inode failed
[ 606.332342] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 606.332348] CIFS VFS: Send error in SessSetup = -13
[ 606.332390] CIFS VFS: cifs_mount failed w/return code = -13
[ 606.336139] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 606.336143] CIFS VFS: Send error in SessSetup = -13
[ 606.336182] CIFS VFS: cifs_mount failed w/return code = -13
[ 606.339513] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 606.339517] CIFS VFS: Send error in SessSetup = -13
[ 606.339554] CIFS VFS: cifs_mount failed w/return code = -13
[ 670.816840] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 670.816846] CIFS VFS: Send error in SessSetup = -13
[ 670.816885] CIFS VFS: cifs_mount failed w/return code = -13
[ 670.820858] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 670.820862] CIFS VFS: Send error in SessSetup = -13
[ 670.820900] CIFS VFS: cifs_mount failed w/return code = -13
[ 670.824399] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 670.824403] CIFS VFS: Send error in SessSetup = -13
[ 670.824438] CIFS VFS: cifs_mount failed w/return code = -13
[ 1086.236787] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 1086.236791] CIFS VFS: Send error in SessSetup = -13
[ 1086.236828] CIFS VFS: cifs_mount failed w/return code = -13
[ 1086.241304] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 1086.241308] CIFS VFS: Send error in SessSetup = -13
[ 1086.241338] CIFS VFS: cifs_mount failed w/return code = -13
[ 1086.246511] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 1086.246515] CIFS VFS: Send error in SessSetup = -13
[ 1086.246546] CIFS VFS: cifs_mount failed w/return code = -13
** Model information
not available
** Loaded modules:
mperf
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
des_generic
ecb
md4
hmac
nls_utf8
cifs
ppdev
lp
bnep
rfcomm
bluetooth
rfkill
crc16
binfmt_misc
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
bridge
8021q
garp
stp
ebtable_filter
ebtables
x_tables
coretemp
loop
joydev
usbhid
hid
snd_hda_codec_analog
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
sr_mod
cdrom
i915
video
drm_kms_helper
drm
i2c_i801
i2c_algo_bit
snd_seq_device
snd_timer
uhci_hcd
i2c_core
snd
ehci_hcd
usbcore
soundcore
iTCO_wdt
iTCO_vendor_support
processor
button
e1000e
parport_pc
parport
usb_common
psmouse
evdev
pcspkr
dcdbas
thermal_sys
serio_raw
ext3
mbcache
jbd
sd_mod
crc_t10dif
ata_generic
ata_piix
libata
scsi_mod
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo br0 br0:0
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet manual
iface vlan1 inet manual
pre-up ifup eth0
vlan-raw-device eth0
iface vlan100 inet manual
vlan-raw-device eth0
iface vlan102 inet manual
vlan-raw-device eth0
iface br0 inet dhcp
pre-up ifup vlan1 vlan100 vlan102
bridge_ports vlan1 vlan100 vlan102
# pre-up ifup vlan1 vlan100
# bridge_ports vlan1 vlan100
post-up /usr/sbin/arp -s 10.x.x.x 00:xx:xx:xx:xx:3f
# address 10.x.x.x
# netmask 255.255.0.0
# gateway 10.x.x.x
# dns-nameservers 10.x.x.xxx
# dns-search abc.de
iface br0:0 inet static
address 10.x.x.x
netmask 255.255.0.0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet6 fe80::221:70ff:xxxx:xxxx/64 scope link
valid_lft forever preferred_lft forever
3: vlan1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master
br0 state UP
link/ether 00:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
4: vlan100@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master br0 state UP
link/ether 00:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
5: vlan102@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master br0 state UP
link/ether 00:xx:xx:xx:xx:xx rd ff:ff:ff:ff:ff:ff
6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 00:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet 10.x.x.x/16 brd 10.1.255.255 scope global br0
inet 10.x.x.x/16 brd 10.2.255.255 scope global br0:0
inet6 fe80::221:70ff:fe27:afab/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
vlan1: 37221 407 0 0 0 0 0 362 20416
192 0 0 0 0 0 0
lo: 206796 375 0 0 0 0 0 0 206796
375 0 0 0 0 0 0
br0: 140471580 66246 0 0 0 0 0 0 8100833
64427 0 0 0 0 0 0
vlan100: 140112008 63791 0 0 0 0 0 88 8090524
64270 0 0 0 0 0 0
eth0: 145480708 113212 0 58 0 0 0 1493 8669250
64859 0 0 0 0 0 0
vlan102: 407043 2151 0 0 0 0 0 121 29173
317 0 0 0 0 0 0
*** Protocol statistics:
Ip:
63863 total packets received
345 with invalid addresses
0 forwarded
0 incoming packets discarded
63470 incoming packets delivered
64707 requests sent out
4 dropped because of missing route
Icmp:
12 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 12
12 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 12
IcmpMsg:
InType3: 12
OutType3: 12
Tcp:
76 active connections openings
19 passive connection openings
2 failed connection attempts
2 connection resets received
4 connections established
62899 segments received
64406 segments send out
5 segments retransmited
0 bad segments received.
5 resets sent
Udp:
601 packets received
0 packets to unknown port received.
0 packet receive errors
307 packets sent
UdpLite:
TcpExt:
40 TCP sockets finished time wait in fast timer
1013 delayed acks sent
Quick ack mode was activated 8 times
57510 packets directly queued to recvmsg prequeue.
253326 bytes directly in process context from backlog
123520292 bytes directly received in process context from prequeue
1336 packet headers predicted
42480 packets header predicted and directly queued to user
350 acknowledgments not containing data payload received
399 predicted acknowledgments
1 other TCP timeouts
8 DSACKs sent for old packets
IpExt:
InMcastPkts: 69
OutMcastPkts: 53
InBcastPkts: 286
OutBcastPkts: 54
InOctets: 140525086
OutOctets: 7397716
InMcastOctets: 5857
OutMcastOctets: 5345
InBcastOctets: 46080
OutBcastOctets: 4792
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82Q35 Express DRAM Controller
[8086:29b0] (rev 02)
Subsystem: Dell OptiPlex 755 [1028:0211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82Q35 Express PCI Express Root
Port [8086:29b1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q35 Express
Integrated Graphics Controller [8086:29b2] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Dell OptiPlex 755 [1028:0211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fea00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec90 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at feb00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82Q35 Express Integrated
Graphics Controller [8086:29b3] (rev 02)
Subsystem: Dell OptiPlex 755 [1028:0211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:03.0 Communication controller [0780]: Intel Corporation 82Q35 Express MEI
Controller [8086:29b4] (rev 02)
Subsystem: Dell OptiPlex 755 [1028:0211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.2 IDE interface [0101]: Intel Corporation 82Q35 Express PT IDER
Controller [8086:29b6] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell OptiPlex 755 [1028:0211]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe80 [size=8]
Region 1: I/O ports at fe90 [size=4]
Region 2: I/O ports at fea0 [size=8]
Region 3: I/O ports at feb0 [size=4]
Region 4: I/O ports at fef0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic
00:03.3 Serial controller [0700]: Intel Corporation 82Q35 Express Serial KT
Controller [8086:29b7] (rev 02) (prog-if 02 [16550])
Subsystem: Dell OptiPlex 755 [1028:0211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ec98 [size=8]
Region 1: Memory at fe9da000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit
Network Connection [8086:10bd] (rev 02)
Subsystem: Dell OptiPlex 755 [1028:0211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe9db000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fe9d9c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 02)
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe9dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000f0100000-00000000f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IO (ICH9DO) LPC Interface
Controller [8086:2914] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4
port SATA Controller [IDE mode] [8086:2920] (rev 02) (prog-if 8f [Master SecP
SecO PriP PriO])
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Region 5: I/O ports at eca0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9d9b00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port
SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO
PriO])
Subsystem: Dell Optiplex 755 [1028:0211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe40 [size=8]
Region 1: I/O ports at fe50 [size=4]
Region 2: I/O ports at fe60 [size=8]
Region 3: I/O ports at fe70 [size=4]
Region 4: I/O ports at fed0 [size=16]
Region 5: I/O ports at ecb0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 413c:1003 Dell Computer Corp. Keyboard Hub
Bus 003 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel
Mouse
Bus 003 Device 004: ID 413c:2010 Dell Computer Corp. Keyboard
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.43
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-33
Versions of packages linux-image-3.2.0-2-686-pae suggests:
ii grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.35
ii firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae:
true
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae:
false
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
Mit freundlichen Grüßen
A. Biel
-------------------------------------------------------------
Ludwig Geissler Schule
Abtlng. IT/EDV
StD Dipl.-Ing. A. Biel
Akademiestrasse 41
63450 Hanau
-------------------------------------------------------------
tel. 06181 937615
fax. 06181 937641
mail. aribiel@ludwig-geissler-schule.de
web. www.ludwig-geissler-schule.de
Reply to: