[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#678568: linux-image-3.2.0-1-686-pae: WD30EZRX 3.0TB not working at all on any Linux.



Package: linux-2.6
Version: 3.2.6-1
Severity: important


   * What led up to the situation?
Kernel has never supported it.

   * What outcome did you expect instead?
I expected it to work out.



-- Package-specific info:
** Version:
Linux version 3.2.0-1-686-pae (Debian 3.2.6-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 SMP Fri Feb 17 06:27:21 UTC 2012

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-686-pae root=UUID=69f0db67-1c69-405c-b48a-3889cd316cc5 ro quiet

** Tainted: PO (4097)
 * Proprietary module has been loaded.
 * Out-of-tree module has been loaded.

** Kernel log:
[    4.212889] scsi 6:0:0:3: Direct-Access     TEAC     USB   HS-SD Card 4.00 PQ: 0 ANSI: 0
[    4.294001] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.302372] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    4.307246] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    4.311119] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    5.835433] udevd[271]: starting version 175
[    6.748174] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    6.748185] ACPI: Power Button [VBTN]
[    6.748301] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    6.748308] ACPI: Power Button [PWRF]
[    6.828363] iTCO_vendor_support: vendor-support=0
[    6.968681] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    6.974748] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    7.118579] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    7.135831] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    7.135966] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    7.857920] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.857991] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    7.858028] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    8.006971] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
[    8.123697] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input4
[    8.123857] generic-usb 0003:413C:2005.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.0-1/input0
[    8.135595] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[    8.135796] generic-usb 0003:413C:3200.0002: input,hidraw1: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1a.0-2/input0
[    8.135827] usbcore: registered new interface driver usbhid
[    8.135830] usbhid: USB HID core driver
[    8.216308] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    8.216626] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    8.216852] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.217066] input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.217289] input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.217507] input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.217717] input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.217929] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.247493] nvidia: module license 'NVIDIA' taints kernel.
[    8.247498] Disabling lock debugging due to kernel taint
[    8.868114] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.868129] nvidia 0000:01:00.0: setting latency timer to 64
[    8.868136] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    8.868808] NVRM: loading NVIDIA UNIX x86 Kernel Module  295.53  Fri May 11 23:13:15 PDT 2012
[   10.540345] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.791033] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.923743] loop: module loaded
[   12.625819] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   12.680081] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   12.680320] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.022496] RPC: Registered named UNIX socket transport module.
[   13.022502] RPC: Registered udp transport module.
[   13.022505] RPC: Registered tcp transport module.
[   13.022508] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   13.101168] FS-Cache: Loaded
[   13.158398] FS-Cache: Netfs 'nfs' registered for caching
[   13.175240] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   14.264768] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[   14.264776] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[   14.264955] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.107828] fuse init (API version 7.17)
[   16.002348] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.030935] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   16.083318] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   19.357356] lp: driver loaded but no devices found
[   19.386876] ppdev: user-space parallel port driver
[   25.008010] eth0: no IPv6 routers present
[   29.592177] vboxdrv: Found 2 processor cores.
[   29.592919] vboxdrv: fAsync=0 offMin=0xb0c offMax=0x2338
[   29.593021] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   29.593025] vboxdrv: Successfully loaded version 4.1.16_Debian (interface 0x00190000).
[   29.699895] vboxpci: IOMMU not found (not registered)
[  807.400023] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[  807.533224] usb 1-4: New USB device found, idVendor=058f, idProduct=6366
[  807.533229] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  807.533233] usb 1-4: Product: Flash Card Reader/Writer
[  807.533237] usb 1-4: Manufacturer: Generic
[  807.533240] usb 1-4: SerialNumber: 058F63666438
[  807.534243] scsi7 : usb-storage 1-4:1.0
[  808.532754] scsi 7:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
[  809.209499] sd 7:0:0:0: [sdf] 62324736 512-byte logical blocks: (31.9 GB/29.7 GiB)
[  809.210238] sd 7:0:0:0: [sdf] Write Protect is off
[  809.210243] sd 7:0:0:0: [sdf] Mode Sense: 03 00 00 00
[  809.210987] sd 7:0:0:0: [sdf] No Caching mode page present
[  809.210992] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[  809.214365] sd 7:0:0:0: [sdf] No Caching mode page present
[  809.214372] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[  809.217159]  sdf: sdf1
[  809.226615] sd 7:0:0:0: [sdf] No Caching mode page present
[  809.226623] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[  809.226628] sd 7:0:0:0: [sdf] Attached SCSI removable disk
[  837.076617] sdf: detected capacity change from 31910264832 to 0
[  840.162271] usb 1-4: USB disconnect, device number 4
[ 7281.434931] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65293 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7281.436456] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65294 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7281.438159] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65295 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7281.975674] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65296 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7283.054137] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65297 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7285.213819] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65298 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7289.534073] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65299 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7298.175920] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65300 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7315.453772] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65301 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7350.013474] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65302 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 
[ 7419.133543] [UFW BLOCK] IN=eth0 OUT= MAC=00:16:76:e3:3c:fc:00:09:5b:9e:c2:c0:08:00 SRC=140.211.15.34 DST=192.168.0.5 LEN=1458 TOS=0x00 PREC=0x00 TTL=49 ID=65303 DF PROTO=TCP SPT=80 DPT=53243 WINDOW=501 RES=0x00 ACK URGP=0 

** Model information
not available

** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
mperf
speedstep_lib
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
parport_pc
ppdev
lp
parport
binfmt_misc
ip6t_LOG
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
ipt_LOG
xt_limit
xt_tcpudp
xt_addrtype
xt_state
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
nvidia(P)
usbhid
hid
snd_hda_codec_idt
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
snd
iTCO_wdt
i2c_i801
psmouse
serio_raw
evdev
dcdbas
pcspkr
soundcore
i2c_core
processor
iTCO_vendor_support
button
thermal_sys
ext4
crc16
jbd2
mbcache
usb_storage
uas
sd_mod
crc_t10dif
sr_mod
cdrom
uhci_hcd
ahci
libahci
libata
ehci_hcd
scsi_mod
usbcore
e1000e
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
	Subsystem: Dell Device [1028:01dd]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: dd000000-dfefffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:19.0 Ethernet controller [0200]: Intel Corporation 82562V 10/100 Network Connection [8086:104c] (rev 02)
	Subsystem: Dell Device [1028:01dd]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at dffe0000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at dffdb000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at ecc0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at ff20 [size=32]
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at ff00 [size=32]
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:01dd]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at dffdac00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
	Subsystem: Dell Device [1028:01dd]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at dffdc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: dcf00000-dcffffff
	Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at ff80 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at ff60 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:01dd]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at ff40 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:01dd]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HH (ICH8DH) LPC Interface Controller [8086:2812] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA Controller [RAID mode] [8086:2822] (rev 02)
	Subsystem: Dell Device [1028:01dd]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 43
	Region 0: I/O ports at fe00 [size=8]
	Region 1: I/O ports at fe10 [size=4]
	Region 2: I/O ports at fe20 [size=8]
	Region 3: I/O ports at fe30 [size=4]
	Region 4: I/O ports at fec0 [size=32]
	Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
	Subsystem: Dell Device [1028:01dd]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 20
	Region 0: Memory at dffdab00 (32-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at ece0 [size=32]
	Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300 LE] [10de:01d1] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:0405]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
	[virtual] Expansion ROM at dfe00000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0644:0200 TEAC Corp. All-In-One Multi-Card Reader CA200/B/S
Bus 003 Device 002: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
Bus 003 Device 003: ID 413c:3200 Dell Computer Corp. Mouse


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-1-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.43
ii  initramfs-tools [linux-initramfs-tool]  0.106
ii  kmod                                    8-2
ii  linux-base                              3.5
ii  module-init-tools                       8-2

Versions of packages linux-image-3.2.0-1-686-pae recommends:
pn  firmware-linux-free  <none>
ii  libc6-i686           2.13-33

Versions of packages linux-image-3.2.0-1-686-pae suggests:
ii  extlinux       2:4.05+dfsg-5
ii  grub-pc        1.99-22
pn  linux-doc-3.2  <none>

Versions of packages linux-image-3.2.0-1-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information excluded



Reply to: