On Fri, Feb 13, 2009 at 03:42:22PM +0100, Vincent Zweije wrote:
|| And unfortunately, it's there in the trunk snapshot as well.
|| [ 31.787940] [drm] Initialized drm 1.1.0 20060810
|| [ 31.811084] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
|| [ 31.811244] [drm] Initialized via 2.11.1 20070202 on minor 0
|| [ 31.843844] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
|| [ 31.843861] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
|| [ 31.843868] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
|| [ 31.843930] pci 0000:01:00.0: putting AGP V3 device into 8x mode
|| [ 32.318292] irq 16: nobody cared (try booting with the "irqpoll" option)
|| [ 32.318299] Pid: 2514, comm: debtorrent-clie Not tainted 2.6.28-1-686 #1
|| [ 32.318302] Call Trace:
|| [ 32.318311] [<c0157ffa>] __report_bad_irq+0x24/0x69
|| [ 32.318316] [<c0158001>] __report_bad_irq+0x2b/0x69
|| [ 32.318320] [<c015812c>] note_interrupt+0xed/0x131
|| [ 32.318324] [<c01572e6>] handle_IRQ_event+0x23/0x51
|| [ 32.318328] [<c015882c>] handle_fasteoi_irq+0x86/0xaa
|| [ 32.318332] [<c0105b87>] do_IRQ+0x67/0x7c
|| [ 32.318336] [<c0104473>] common_interrupt+0x23/0x28
|| [ 32.318338] handlers:
|| [ 32.318339] [<dca443e4>] (via_driver_irq_handler+0x0/0x13d [via])
|| [ 32.318350] Disabling IRQ #16
The problem has disappeared. Don't know when, haven't checked the PC in
a long time.
The new log is also mussing the line:
agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
so maybe it was Xorg after all.
Log attached.
From my part, this can probably be closed.
Vincent.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.19-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Fri Jun 1 18:56:14 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bff0000 (usable)
[ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000/K8M800-8237, BIOS 1.0v 06/24/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1bff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CBFFF uncachable
[ 0.000000] CC000-D3FFF write-back
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 base 001C000000 mask FFFC000000 uncachable
[ 0.000000] 2 base 00D0000000 mask FFF8000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5a50] f5a50
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001bff0000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 001be00000 page 2M
[ 0.000000] 001be00000 - 001bff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1bff0000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 1aaa8000 - 1b4f1000
[ 0.000000] ACPI: RSDP 000f76e0 00014 (v00 VIAK8 )
[ 0.000000] ACPI: RSDT 1bff3000 0002C (v01 VIAK8 AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: FACP 1bff3040 00074 (v01 VIAK8 AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: DSDT 1bff30c0 045DC (v01 VIAK8 AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 1bff0000 00040
[ 0.000000] ACPI: APIC 1bff76c0 0005A (v01 VIAK8 AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1bff0000
[ 0.000000] low ram: 0 - 1bff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001bff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001bff0
[ 0.000000] On node 0 totalpages: 114559
[ 0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map dbc6f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 864 pages used for memmap
[ 0.000000] Normal zone: 109712 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e2c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @dbc5d000 s33024 r0 d24320 u57344
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113663
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=UUID=42471fed-6864-4172-9f11-3b6781bef510 ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 438396k/458688k available (2843k kernel code, 19840k reserved, 1369k data, 412k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xdc7f0000 - 0xff9fe000 ( 562 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB)
[ 0.000000] .init : 0xc141e000 - 0xc1485000 ( 412 kB)
[ 0.000000] .data : 0xc12c6e6c - 0xc141d600 (1369 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c6e6c (2843 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] ^IRCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=da406000 soft=da408000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1808.156 MHz processor.
[ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3616.31 BogoMIPS (lpj=7232624)
[ 0.008008] pid_max: default: 32768 minimum: 301
[ 0.008060] Security Framework initialized
[ 0.008067] AppArmor: AppArmor disabled by boot time parameter
[ 0.008086] Mount-cache hash table entries: 512
[ 0.008236] Initializing cgroup subsys cpuacct
[ 0.008243] Initializing cgroup subsys memory
[ 0.008254] Initializing cgroup subsys devices
[ 0.008258] Initializing cgroup subsys freezer
[ 0.008261] Initializing cgroup subsys net_cls
[ 0.008265] Initializing cgroup subsys blkio
[ 0.008273] Initializing cgroup subsys perf_event
[ 0.008307] mce: CPU supports 5 MCE banks
[ 0.008378] SMP alternatives: switching to UP code
[ 0.010750] Freeing SMP alternatives: 8k freed
[ 0.010760] ACPI: Core revision 20110623
[ 0.014962] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.055754] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Brought up 1 CPUs
[ 0.056003] Total of 1 processors activated (3616.31 BogoMIPS).
[ 0.056003] devtmpfs: initialized
[ 0.056003] PM: Registering ACPI NVS region at 1bff0000 (12288 bytes)
[ 0.056003] print_constraints: dummy:
[ 0.056003] NET: Registered protocol family 16
[ 0.056003] node 0 link 0: io port [1000, fffff]
[ 0.056003] TOM: 0000000020000000 aka 512M
[ 0.056003] node 0 link 0: mmio [20000000, d7ffffff]
[ 0.056003] node 0 link 0: mmio [d8000000, dbffffff]
[ 0.056003] node 0 link 0: mmio [dc000000, dcffffff]
[ 0.056003] node 0 link 0: mmio [dd000000, ff70ffff]
[ 0.056003] node 0 link 0: mmio [a0000, bffff]
[ 0.056003] bus: [00, ff] on node 0 link 0
[ 0.056003] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.056003] bus: 00 index 1 [mem 0x20000000-0xfcffffffff]
[ 0.056003] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.056003] ACPI: bus type pci registered
[ 0.056003] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.056003] PCI: PCI BIOS revision 2.10 entry at 0xfbae0, last bus=1
[ 0.056003] PCI: Using configuration type 1 for base access
[ 0.056003] bio: create slab <bio-0> at 0
[ 0.056003] ACPI: Added _OSI(Module Device)
[ 0.056003] ACPI: Added _OSI(Processor Device)
[ 0.056003] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.056003] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.056368] ACPI: EC: Look up EC in DSDT
[ 0.057331] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated
[ 0.057336]
[ 0.060342] ACPI: Interpreter enabled
[ 0.060354] ACPI: (supports S0 S3 S4 S5)
[ 0.060378] ACPI: Using IOAPIC for interrupt routing
[ 0.064535] ACPI: No dock devices found.
[ 0.064539] HEST: Table not found.
[ 0.064547] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.064626] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.064780] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.064784] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.064788] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.064792] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.064796] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.064819] pci 0000:00:00.0: [1106:0204] type 0 class 0x000600
[ 0.064829] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.064910] pci 0000:00:00.1: [1106:1204] type 0 class 0x000600
[ 0.064949] pci 0000:00:00.2: [1106:2204] type 0 class 0x000600
[ 0.064989] pci 0000:00:00.3: [1106:3204] type 0 class 0x000600
[ 0.065028] pci 0000:00:00.4: [1106:4204] type 0 class 0x000600
[ 0.065069] pci 0000:00:00.7: [1106:7204] type 0 class 0x000600
[ 0.065111] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
[ 0.065154] pci 0000:00:01.0: supports D1
[ 0.065184] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000101
[ 0.065200] pci 0000:00:0f.0: reg 10: [io 0x9000-0x9007]
[ 0.065210] pci 0000:00:0f.0: reg 14: [io 0x9400-0x9403]
[ 0.065219] pci 0000:00:0f.0: reg 18: [io 0x9800-0x9807]
[ 0.065230] pci 0000:00:0f.0: reg 1c: [io 0x9c00-0x9c03]
[ 0.065240] pci 0000:00:0f.0: reg 20: [io 0xa000-0xa00f]
[ 0.065249] pci 0000:00:0f.0: reg 24: [io 0xa400-0xa4ff]
[ 0.065297] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[ 0.065338] pci 0000:00:0f.1: reg 20: [io 0xa800-0xa80f]
[ 0.065398] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.065436] pci 0000:00:10.0: reg 20: [io 0xac00-0xac1f]
[ 0.065471] pci 0000:00:10.0: supports D1 D2
[ 0.065475] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065480] pci 0000:00:10.0: PME# disabled
[ 0.065497] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.065535] pci 0000:00:10.1: reg 20: [io 0xb000-0xb01f]
[ 0.065570] pci 0000:00:10.1: supports D1 D2
[ 0.065573] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065578] pci 0000:00:10.1: PME# disabled
[ 0.065596] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.065635] pci 0000:00:10.2: reg 20: [io 0xb400-0xb41f]
[ 0.065670] pci 0000:00:10.2: supports D1 D2
[ 0.065673] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065678] pci 0000:00:10.2: PME# disabled
[ 0.065694] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[ 0.065733] pci 0000:00:10.3: reg 20: [io 0xb800-0xb81f]
[ 0.065768] pci 0000:00:10.3: supports D1 D2
[ 0.065771] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065776] pci 0000:00:10.3: PME# disabled
[ 0.065794] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[ 0.065809] pci 0000:00:10.4: reg 10: [mem 0xde000000-0xde0000ff]
[ 0.065868] pci 0000:00:10.4: supports D1 D2
[ 0.065871] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065876] pci 0000:00:10.4: PME# disabled
[ 0.065898] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
[ 0.065952] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.065996] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[ 0.066012] pci 0000:00:11.5: reg 10: [io 0xbc00-0xbcff]
[ 0.066076] pci 0000:00:11.5: supports D1 D2
[ 0.066096] pci 0000:00:13.0: [10ec:8139] type 0 class 0x000200
[ 0.066112] pci 0000:00:13.0: reg 10: [io 0xc000-0xc0ff]
[ 0.066122] pci 0000:00:13.0: reg 14: [mem 0xde001000-0xde0010ff]
[ 0.066177] pci 0000:00:13.0: supports D1 D2
[ 0.066180] pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold
[ 0.066185] pci 0000:00:13.0: PME# disabled
[ 0.066204] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.066228] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.066248] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.066267] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.066290] PCI: peer root bus 00 res updated from pci conf
[ 0.066326] pci 0000:01:00.0: [1106:3108] type 0 class 0x000300
[ 0.066339] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref]
[ 0.066347] pci 0000:01:00.0: reg 14: [mem 0xdc000000-0xdcffffff]
[ 0.066369] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.066391] pci 0000:01:00.0: supports D1 D2
[ 0.066419] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.066425] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xddffffff]
[ 0.066431] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 0.066439] pci_bus 0000:00: on NUMA node 0
[ 0.066443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.066719] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.094867] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 0.094963] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 0.095060] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[ 0.095142] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.095218] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.095288] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.095359] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.095429] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.095549] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 0.095667] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 0.095803] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 0.095921] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 0.096115] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.096119] vgaarb: loaded
[ 0.096121] vgaarb: bridge control possible 0000:01:00.0
[ 0.096176] PCI: Using ACPI for IRQ routing
[ 0.096181] PCI: pci_cache_line_size set to 64 bytes
[ 0.096258] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.096262] reserve RAM buffer: 000000001bff0000 - 000000001bffffff
[ 0.098323] pnp: PnP ACPI init
[ 0.098348] ACPI: bus type pnp registered
[ 0.098578] pnp 00:00: [mem 0x000cc000-0x000d3fff]
[ 0.098581] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[ 0.098585] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.098588] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.098591] pnp 00:00: [mem 0x1bff0000-0x1bffffff]
[ 0.098594] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.098598] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.098601] pnp 00:00: [mem 0x00100000-0x1bfeffff]
[ 0.098604] pnp 00:00: [mem 0x1c000000-0x1fffffff]
[ 0.098607] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[ 0.098610] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 0.098613] pnp 00:00: [mem 0xfff80000-0xfffeffff]
[ 0.098693] system 00:00: [mem 0x000cc000-0x000d3fff] has been reserved
[ 0.098697] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.098701] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.098706] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.098710] system 00:00: [mem 0x1bff0000-0x1bffffff] could not be reserved
[ 0.098714] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.098719] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.098723] system 00:00: [mem 0x00100000-0x1bfeffff] could not be reserved
[ 0.098727] system 00:00: [mem 0x1c000000-0x1fffffff] has been reserved
[ 0.098732] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.098736] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.098740] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.098746] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.098813] pnp 00:01: [bus 00-ff]
[ 0.098817] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.098820] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.098823] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.098827] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.098830] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[ 0.098834] pnp 00:01: [mem 0x20000000-0xfebfffff window]
[ 0.098886] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.098912] pnp 00:02: [io 0x4000-0x407f]
[ 0.098915] pnp 00:02: [io 0x40f0-0x40ff]
[ 0.098918] pnp 00:02: [io 0x5000-0x500f]
[ 0.098973] system 00:02: [io 0x4000-0x407f] has been reserved
[ 0.098978] system 00:02: [io 0x40f0-0x40ff] has been reserved
[ 0.098982] system 00:02: [io 0x5000-0x500f] has been reserved
[ 0.098986] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.099361] pnp 00:03: [io 0x0010-0x001f]
[ 0.099364] pnp 00:03: [io 0x0022-0x003f]
[ 0.099367] pnp 00:03: [io 0x0044-0x005f]
[ 0.099370] pnp 00:03: [io 0x0062-0x0063]
[ 0.099373] pnp 00:03: [io 0x0065-0x006f]
[ 0.099376] pnp 00:03: [io 0x0074-0x007f]
[ 0.099379] pnp 00:03: [io 0x0091-0x0093]
[ 0.099382] pnp 00:03: [io 0x00a2-0x00bf]
[ 0.099385] pnp 00:03: [io 0x00e0-0x00ef]
[ 0.099388] pnp 00:03: [io 0x04d0-0x04d1]
[ 0.099391] pnp 00:03: [io 0x0290-0x029f]
[ 0.099394] pnp 00:03: [io 0x0800-0x0805]
[ 0.099464] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.099468] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.099472] system 00:03: [io 0x0800-0x0805] has been reserved
[ 0.099477] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.099492] pnp 00:04: [dma 4]
[ 0.099495] pnp 00:04: [io 0x0000-0x000f]
[ 0.099498] pnp 00:04: [io 0x0080-0x0090]
[ 0.099502] pnp 00:04: [io 0x0094-0x009f]
[ 0.099505] pnp 00:04: [io 0x00c0-0x00df]
[ 0.099546] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.099560] pnp 00:05: [io 0x0070-0x0073]
[ 0.099574] pnp 00:05: [irq 8]
[ 0.099611] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.099622] pnp 00:06: [io 0x0061]
[ 0.099661] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.099672] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.099679] pnp 00:07: [irq 13]
[ 0.099716] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.099988] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.100020] pnp 00:08: [irq 4]
[ 0.100110] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.100316] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.100323] pnp 00:09: [irq 3]
[ 0.100393] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.100788] pnp 00:0a: [io 0x0378-0x037f]
[ 0.100792] pnp 00:0a: [io 0x0778-0x077b]
[ 0.100798] pnp 00:0a: [irq 7]
[ 0.100801] pnp 00:0a: [dma 3]
[ 0.100889] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.100941] pnp 00:0b: [irq 12]
[ 0.100982] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.101011] pnp 00:0c: [io 0x0060]
[ 0.101014] pnp 00:0c: [io 0x0064]
[ 0.101020] pnp 00:0c: [irq 1]
[ 0.101060] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.101086] pnp: PnP ACPI: found 13 devices
[ 0.101088] ACPI: ACPI bus type pnp unregistered
[ 0.101094] PnPBIOS: Disabled by ACPI PNP
[ 0.137949] Switching to clocksource acpi_pm
[ 0.137985] PCI: max bus depth: 1 pci_try_num: 2
[ 0.138013] pci 0000:01:00.0: BAR 6: assigned [mem 0xdd000000-0xdd00ffff pref]
[ 0.138018] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.138025] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xddffffff]
[ 0.138030] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 0.138045] pci 0000:00:01.0: setting latency timer to 64
[ 0.138050] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.138053] pci_bus 0000:00: resource 5 [mem 0x20000000-0xfcffffffff]
[ 0.138057] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.138061] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xddffffff]
[ 0.138065] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff pref]
[ 0.138131] NET: Registered protocol family 2
[ 0.138212] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.138480] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.138594] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.138728] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.138732] TCP reno registered
[ 0.138736] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.138747] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.138877] NET: Registered protocol family 1
[ 0.138893] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.138912] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.139154] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 0.139157] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 0.139176] pci 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 0.139195] pci 0000:00:10.0: PCI INT A disabled
[ 0.139206] pci 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 0.139221] pci 0000:00:10.1: PCI INT A disabled
[ 0.139231] pci 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 0.139247] pci 0000:00:10.2: PCI INT B disabled
[ 0.139256] pci 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 0.139272] pci 0000:00:10.3: PCI INT B disabled
[ 0.139281] pci 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 0.139314] pci 0000:00:10.4: PCI INT C disabled
[ 0.139336] pci 0000:01:00.0: Boot video device
[ 0.139340] PCI: CLS 32 bytes, default 64
[ 0.139421] Unpacking initramfs...
[ 0.510338] Freeing initrd memory: 10532k freed
[ 0.521976] audit: initializing netlink socket (disabled)
[ 0.521994] type=2000 audit(1339852006.520:1): initialized
[ 0.543434] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.543573] VFS: Disk quotas dquot_6.5.2
[ 0.543611] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.543692] msgmni has been set to 876
[ 0.543884] alg: No test for stdrng (krng)
[ 0.543922] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.543927] io scheduler noop registered
[ 0.543929] io scheduler deadline registered
[ 0.543939] io scheduler cfq registered (default)
[ 0.544116] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.544157] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.544160] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.544562] ERST: Table is not found!
[ 0.544565] GHES: HEST is not enabled!
[ 0.544581] isapnp: Scanning for PnP cards...
[ 0.898475] isapnp: No Plug & Play device found
[ 0.898574] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.918906] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.939242] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.959830] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.980207] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.980473] Linux agpgart interface v0.103
[ 0.980532] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[ 0.984795] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 0.985016] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.985500] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.985509] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.985671] mousedev: PS/2 mouse device common for all mice
[ 0.985727] rtc_cmos 00:05: RTC can wake from S4
[ 0.985865] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.985913] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.985928] cpuidle: using governor ladder
[ 0.985931] cpuidle: using governor menu
[ 0.986239] TCP cubic registered
[ 0.986269] NET: Registered protocol family 10
[ 0.986950] Mobile IPv6
[ 0.986955] NET: Registered protocol family 17
[ 0.986960] Registering the dns_resolver key type
[ 0.986987] Using IPI No-Shortcut mode
[ 0.987127] PM: Hibernation image not present or could not be loaded.
[ 0.987144] registered taskstats version 1
[ 0.987439] rtc_cmos 00:05: setting system clock to 2012-06-16 13:06:47 UTC (1339852007)
[ 0.987490] Initializing network drop monitor service
[ 0.987636] Freeing unused kernel memory: 412k freed
[ 0.988127] Write protecting the kernel text: 2844k
[ 0.988163] Write protecting the kernel read-only data: 1112k
[ 0.988166] NX-protecting the kernel data: 3300k
[ 1.003752] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.088259] udevd[46]: starting version 175
[ 1.194355] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.194385] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.195028] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.195091] 8139too 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.253652] 8139too 0000:00:13.0: eth0: RealTek RTL8139 at 0xc000, 00:14:85:47:20:98, IRQ 18
[ 1.267482] SCSI subsystem initialized
[ 1.279601] usbcore: registered new interface driver usbfs
[ 1.279635] usbcore: registered new interface driver hub
[ 1.302905] usbcore: registered new device driver usb
[ 1.303629] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.303676] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 1.303702] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 1.303740] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.303814] ehci_hcd 0000:00:10.4: irq 21, io mem 0xde000000
[ 1.317150] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.317207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.317211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.317215] usb usb1: Product: EHCI Host Controller
[ 1.317218] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.317221] usb usb1: SerialNumber: 0000:00:10.4
[ 1.317402] hub 1-0:1.0: USB hub found
[ 1.317408] hub 1-0:1.0: 8 ports detected
[ 1.318076] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.318146] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 1.318162] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.318181] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.318213] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ac00
[ 1.318268] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.318272] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.318275] usb usb2: Product: UHCI Host Controller
[ 1.318278] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.318281] usb usb2: SerialNumber: 0000:00:10.0
[ 1.318572] hub 2-0:1.0: USB hub found
[ 1.318581] hub 2-0:1.0: 2 ports detected
[ 1.318682] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 1.318696] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.318708] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.318736] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b000
[ 1.318781] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.318785] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.318789] usb usb3: Product: UHCI Host Controller
[ 1.318792] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.318795] usb usb3: SerialNumber: 0000:00:10.1
[ 1.318952] hub 3-0:1.0: USB hub found
[ 1.318957] hub 3-0:1.0: 2 ports detected
[ 1.319045] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 1.319055] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.319066] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.319090] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400
[ 1.319134] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.319138] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.319141] usb usb4: Product: UHCI Host Controller
[ 1.319144] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.319147] usb usb4: SerialNumber: 0000:00:10.2
[ 1.319285] hub 4-0:1.0: USB hub found
[ 1.319291] hub 4-0:1.0: 2 ports detected
[ 1.319374] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 1.319384] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.319394] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.319418] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b800
[ 1.319461] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.319465] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.319468] usb usb5: Product: UHCI Host Controller
[ 1.319471] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.319474] usb usb5: SerialNumber: 0000:00:10.3
[ 1.319616] hub 5-0:1.0: USB hub found
[ 1.319622] hub 5-0:1.0: 2 ports detected
[ 1.332290] libata version 3.00 loaded.
[ 1.332716] sata_via 0000:00:0f.0: version 2.6
[ 1.332949] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 1.332953] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 1.332973] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 1.333031] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.337522] scsi0 : sata_via
[ 1.344892] scsi1 : sata_via
[ 1.345001] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x9400 bmdma 0xa000 irq 20
[ 1.345006] ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9c00 bmdma 0xa008 irq 20
[ 1.348689] pata_via 0000:00:0f.1: version 0.3.4
[ 1.348711] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 1.350949] scsi2 : pata_via
[ 1.353443] scsi3 : pata_via
[ 1.354789] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14
[ 1.354794] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15
[ 1.520512] ata3.00: ATA-7: ST3200826A, 3.03, max UDMA/100
[ 1.520518] ata3.00: 390721968 sectors, multi 16: LBA48
[ 1.528324] ata3.00: configured for UDMA/100
[ 1.540016] Refined TSC clocksource calibration: 1808.313 MHz.
[ 1.540023] Switching to clocksource tsc
[ 1.552011] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.764009] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.774758] scsi 2:0:0:0: Direct-Access ATA ST3200826A 3.03 PQ: 0 ANSI: 5
[ 1.924012] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 1.949928] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.949981] sd 2:0:0:0: [sda] Write Protect is off
[ 1.949986] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.950008] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.016231] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 2.017306] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.112813] usb 3-1: New USB device found, idVendor=046d, idProduct=c00e
[ 2.112819] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.112823] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 2.112826] usb 3-1: Manufacturer: Logitech
[ 2.135715] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input1
[ 2.136449] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1/input0
[ 2.136921] usbcore: registered new interface driver usbhid
[ 2.136926] usbhid: USB HID core driver
[ 2.352038] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.525188] usb 4-1: New USB device found, idVendor=058f, idProduct=9360
[ 2.525194] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.525198] usb 4-1: Product: USB Reader
[ 2.525201] usb 4-1: Manufacturer:
[ 2.525203] usb 4-1: SerialNumber: 2004888
[ 2.534819] usbcore: registered new interface driver uas
[ 2.538269] Initializing USB Mass Storage driver...
[ 2.538670] scsi4 : usb-storage 4-1:1.0
[ 2.538817] usbcore: registered new interface driver usb-storage
[ 2.538820] USB Mass Storage support registered.
[ 3.036892] PM: Starting manual resume from disk
[ 3.036899] PM: Hibernation image partition 8:5 present
[ 3.036902] PM: Looking for hibernation image.
[ 3.049780] PM: Image not found (code -22)
[ 3.049783] PM: Hibernation image not present or could not be loaded.
[ 3.062872] kjournald starting. Commit interval 5 seconds
[ 3.062901] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 3.540235] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.543242] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.546221] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.549222] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.594222] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 3.599219] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.604235] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 3.609218] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 4.566091] udevd[284]: starting version 175
[ 5.123372] parport_pc 00:0a: reported by Plug and Play ACPI
[ 5.123464] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.170073] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.170082] ACPI: Power Button [PWRB]
[ 5.170184] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.170189] ACPI: Power Button [PWRF]
[ 5.174811] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.423403] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.973491] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 5.973497] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 5.973518] snd_via82xx 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 5.973683] snd_via82xx 0000:00:11.5: setting latency timer to 64
[ 6.163389] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 7.716173] Adding 987960k swap on /dev/sda5. Priority:-1 extents:1 across:987960k
[ 8.463970] EXT3-fs (sda7): using internal journal
[ 8.573382] device-mapper: uevent: version 1.0.3
[ 8.574162] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 11.029509] kjournald starting. Commit interval 5 seconds
[ 11.029721] EXT3-fs (sda6): using internal journal
[ 11.029726] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 11.099975] kjournald starting. Commit interval 5 seconds
[ 11.100201] EXT3-fs (sda10): using internal journal
[ 11.100206] EXT3-fs (sda10): mounted filesystem with ordered data mode
[ 11.165234] kjournald starting. Commit interval 5 seconds
[ 11.165412] EXT3-fs (sda8): using internal journal
[ 11.165417] EXT3-fs (sda8): mounted filesystem with ordered data mode
[ 11.251267] kjournald starting. Commit interval 5 seconds
[ 11.251445] EXT3-fs (sda9): using internal journal
[ 11.251450] EXT3-fs (sda9): mounted filesystem with ordered data mode
[ 11.443921] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 11.819116] fuse init (API version 7.17)
[ 16.124920] 8139too 0000:00:13.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 28.497227] [drm] Initialized drm 1.1.0 20060810
[ 28.612184] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 28.612889] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 28.612894] [drm] No driver support for vblank timestamp query.
[ 28.612899] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[ 28.808660] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 28.808684] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 28.808749] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 29.212340] Bluetooth: Core ver 2.16
[ 29.212395] NET: Registered protocol family 31
[ 29.212398] Bluetooth: HCI device and connection manager initialized
[ 29.212402] Bluetooth: HCI socket layer initialized
[ 29.212405] Bluetooth: L2CAP socket layer initialized
[ 29.212877] Bluetooth: SCO socket layer initialized
[ 29.245945] Bluetooth: RFCOMM TTY layer initialized
[ 29.245954] Bluetooth: RFCOMM socket layer initialized
[ 29.245957] Bluetooth: RFCOMM ver 1.11
[ 29.297036] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.297041] Bluetooth: BNEP filters: protocol multicast
[ 33.144354] lp0: using parport0 (interrupt-driven).
[ 33.403719] ppdev: user-space parallel port driver
[ 40.926246] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ (1 cpu cores) (version 2.20.00)
[ 40.926324] powernow-k8: fid 0xa (1800 MHz), vid 0x6
[ 40.926327] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 41.217697] Marking TSC unstable due to cpufreq changes
[ 41.220419] Switching to clocksource acpi_pm
--
Vincent Zweije <vincent@zweije.nl> | "If you're flamed in a group you
<http://www.xs4all.nl/~zweije/> | don't read, does anybody get burnt?"
[Xhost should be taken out and shot] | -- Paul Tomblin on a.s.r.
Attachment:
signature.asc
Description: Digital signature