On Fri, 2012-06-15 at 22:53 -0500, Jonathan Nieder wrote: > Thanks again for that. Another interesting test would be a plain > current (3.5-rc2 or newer) mainline kernel, built like so: I built the kernel from the git repository as you described. The tablet does not work. lsusb -t gives: Port 5: Dev 5, If 0, Class=HID, Driver=, 12M The dmesg output is attached. The two input files mentioned in this file, which are related to the wacom tablet, are not there after booting. On Sat, 2012-06-16 at 02:31 -0500, Jonathan Nieder wrote: > > 0002: > > > > I could not apply the patch: > > Are you trying to apply this patch alone or on top of 0001? Only the > latter is supposed to work. Ah, I tried to apply 0002 alone. However, since already 0001 does not work 0001+0002 should also fail? Nils >
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-rc2+ (nils@x220tablet) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Sat Jun 16 13:24:37 CEST 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-rc2+ root=UUID=b85df6c7-1c58-4c42-8d8a-1b65258b864d ro quiet i915.i915_enable_rc6=1 [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: LENOVO 42992QG/42992QG, BIOS 8DET52WW (1.22 ) 09/15/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask FE0000000 write-back [ 0.000000] 8 base 21F000000 mask FFF000000 uncachable [ 0.000000] 9 base 21E800000 mask FFF800000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff] [ 0.000000] [mem 0x00000000-0xdaffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1f923000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x21e5fffff] [ 0.000000] [mem 0x100000000-0x21e5fffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x21e5fffff @ [mem 0xda995000-0xda99efff] [ 0.000000] RAMDISK: [mem 0x37514000-0x37a81fff] [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000daffe120 000AC (v01 LENOVO TP-8D 00001220 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafe7000 000F4 (v04 LENOVO TP-8D 00001220 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000dafea000 0F686 (v01 LENOVO TP-8D 00001220 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf2d000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8D 00001220 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000daffa000 007D1 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 00000000dafe6000 00038 (v01 LENOVO TP-8D 00001220 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafe5000 00098 (v01 LENOVO TP-8D 00001220 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafe4000 0003C (v01 LENOVO TP-8D 00001220 PTL 00000002) [ 0.000000] ACPI: ECDT 00000000dafe3000 00052 (v01 LENOVO TP-8D 00001220 PTL 00000002) [ 0.000000] ACPI: ASF! 00000000dafe9000 000A5 (v32 LENOVO TP-8D 00001220 PTL 00000002) [ 0.000000] ACPI: TCPA 00000000dafe2000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 00000000dafe1000 00A27 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafe0000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 00000000dafdf000 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafde000 0003E (v01 LENOVO TP-8D 00001220 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafdd000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafdc000 00292 (v01 LENOVO TP-8D 00001220 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21e5fffff] [ 0.000000] NODE_DATA [mem 0x21e5fc000-0x21e5fffff] [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880215c00000-ffff88021cdfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xda99efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x21e5fffff] [ 0.000000] On node 0 totalpages: 2067245 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 875992 pages, LIFO batch:31 [ 0.000000] Normal zone: 16037 pages used for memmap [ 0.000000] Normal zone: 1156955 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000da99f000 - 00000000dae9f000 [ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000 [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000 [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000 [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd20000 [ 0.000000] PM: Registered nosave memory: 00000000ffd20000 - 0000000100000000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021e200000 s82496 r8192 d24000 u262144 [ 0.000000] pcpu-alloc: s82496 r8192 d24000 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036866 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-rc2+ root=UUID=b85df6c7-1c58-4c42-8d8a-1b65258b864d ro quiet i915.i915_enable_rc6=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8071188k/8886272k available (3446k kernel code, 617292k absent, 197792k reserved, 3246k data, 580k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2491.910 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4983.82 BogoMIPS (lpj=9967640) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000040] Security Framework initialized [ 0.000044] AppArmor: AppArmor disabled by boot time parameter [ 0.000516] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002100] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002794] Mount-cache hash table entries: 256 [ 0.002984] Initializing cgroup subsys cpuacct [ 0.002985] Initializing cgroup subsys memory [ 0.002997] Initializing cgroup subsys devices [ 0.002999] Initializing cgroup subsys freezer [ 0.003000] Initializing cgroup subsys net_cls [ 0.003002] Initializing cgroup subsys blkio [ 0.003003] Initializing cgroup subsys perf_event [ 0.003030] Disabled fast string operations [ 0.003032] CPU: Physical Processor ID: 0 [ 0.003033] CPU: Processor Core ID: 0 [ 0.003037] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003037] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003040] mce: CPU supports 7 MCE banks [ 0.003051] CPU0: Thermal monitoring enabled (TM1) [ 0.003058] using mwait in idle threads. [ 0.003497] ACPI: Core revision 20120320 [ 0.011355] DMAR: Host address width 36 [ 0.011357] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.011363] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.011364] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.011369] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.011371] DMAR: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff [ 0.011372] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff [ 0.011442] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.011443] HPET id 0 under DRHD base 0xfed91000 [ 0.011444] HPET id 0 under DRHD base 0xfed91000 [ 0.011445] HPET id 0 under DRHD base 0xfed91000 [ 0.011446] HPET id 0 under DRHD base 0xfed91000 [ 0.011447] HPET id 0 under DRHD base 0xfed91000 [ 0.011448] HPET id 0 under DRHD base 0xfed91000 [ 0.011449] HPET id 0 under DRHD base 0xfed91000 [ 0.011450] HPET id 0 under DRHD base 0xfed91000 [ 0.011694] Enabled IRQ remapping in x2apic mode [ 0.011697] Enabling x2apic [ 0.011698] Enabled x2apic [ 0.011703] Switched APIC routing to cluster x2apic. [ 0.012133] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.051728] CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz stepping 07 [ 0.156021] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.156022] PEBS disabled due to CPU errata. [ 0.156023] ... version: 3 [ 0.156024] ... bit width: 48 [ 0.156025] ... generic registers: 4 [ 0.156026] ... value mask: 0000ffffffffffff [ 0.156027] ... max period: 000000007fffffff [ 0.156028] ... fixed-purpose events: 3 [ 0.156029] ... event mask: 000000070000000f [ 0.156390] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.167426] Disabled fast string operations [ 0.180547] Disabled fast string operations [ 0.193653] Disabled fast string operations [ 0.195781] Booting Node 0, Processors #1 #2 #3 [ 0.195781] Brought up 4 CPUs [ 0.195785] Total of 4 processors activated (19935.28 BogoMIPS). [ 0.199033] devtmpfs: initialized [ 0.202392] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes) [ 0.202515] dummy: [ 0.202578] NET: Registered protocol family 16 [ 0.202724] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.202725] ACPI: bus type pci registered [ 0.202972] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.202974] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.206256] PCI: Using configuration type 1 for base access [ 0.207061] bio: create slab <bio-0> at 0 [ 0.207139] ACPI: Added _OSI(Module Device) [ 0.207141] ACPI: Added _OSI(Processor Device) [ 0.207143] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.207145] ACPI: Added _OSI(Processor Aggregator Device) [ 0.208526] ACPI: EC: EC description table is found, configuring boot EC [ 0.214183] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.217199] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.217562] ACPI: Dynamic OEM Table Load: [ 0.217566] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.217865] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.218268] ACPI: Dynamic OEM Table Load: [ 0.218271] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.218402] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.218757] ACPI: Dynamic OEM Table Load: [ 0.218760] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.219418] ACPI: Interpreter enabled [ 0.219438] ACPI: (supports S0 S3 S4 S5) [ 0.219442] ACPI: Using IOAPIC for interrupt routing [ 0.222426] ACPI: Power Resource [PUBS] (on) [ 0.225623] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.226849] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.226853] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.226973] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.226996] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.226998] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.227000] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.227002] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfebfffff] [ 0.227004] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff] [ 0.227037] PCI host bridge to bus 0000:00 [ 0.227039] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.227041] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.227043] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.227044] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff] [ 0.227046] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff] [ 0.227055] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.227092] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.227102] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.227108] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.227112] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] [ 0.227166] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.227190] pci 0000:00:16.0: reg 10: [mem 0xf2525000-0xf252500f 64bit] [ 0.227266] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.227293] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002 [ 0.227311] pci 0000:00:16.3: reg 10: [io 0x50b0-0x50b7] [ 0.227320] pci 0000:00:16.3: reg 14: [mem 0xf252c000-0xf252cfff] [ 0.227422] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.227440] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff] [ 0.227449] pci 0000:00:19.0: reg 14: [mem 0xf252b000-0xf252bfff] [ 0.227457] pci 0000:00:19.0: reg 18: [io 0x5080-0x509f] [ 0.227521] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.227549] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.227569] pci 0000:00:1a.0: reg 10: [mem 0xf252a000-0xf252a3ff] [ 0.227659] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.227688] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.227703] pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit] [ 0.227772] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.227801] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.227938] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.227978] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.228109] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.228149] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.228277] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.228318] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.228448] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.228492] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.228513] pci 0000:00:1d.0: reg 10: [mem 0xf2529000-0xf25293ff] [ 0.228603] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.228632] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 0.228757] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.228776] pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af] [ 0.228784] pci 0000:00:1f.2: reg 14: [io 0x50bc-0x50bf] [ 0.228792] pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7] [ 0.228800] pci 0000:00:1f.2: reg 1c: [io 0x50b8-0x50bb] [ 0.228809] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] [ 0.228817] pci 0000:00:1f.2: reg 24: [mem 0xf2528000-0xf25287ff] [ 0.228861] pci 0000:00:1f.2: PME# supported from D3hot [ 0.228882] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.228898] pci 0000:00:1f.3: reg 10: [mem 0xf2524000-0xf25240ff 64bit] [ 0.228919] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.229018] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.229263] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000 [ 0.229426] pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit] [ 0.230141] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.235989] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.235998] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.236077] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.236082] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.236086] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff] [ 0.236095] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.236385] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001 [ 0.236403] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 0.236429] pci 0000:0d:00.0: reg 10: [mem 0xf1400000-0xf14000ff] [ 0.236624] pci 0000:0d:00.0: supports D1 D2 [ 0.236626] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.243983] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.243988] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.243992] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.244000] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.244033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.244153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.244185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.244215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.244250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.244402] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.244592] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.244593] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.247180] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.247244] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) [ 0.247305] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.247366] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.247426] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) [ 0.247476] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.247537] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11) [ 0.247597] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) [ 0.247689] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.247695] vgaarb: loaded [ 0.247696] vgaarb: bridge control possible 0000:00:02.0 [ 0.247735] PCI: Using ACPI for IRQ routing [ 0.249461] PCI: pci_cache_line_size set to 64 bytes [ 0.249894] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.249896] e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff] [ 0.249898] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.249899] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff] [ 0.250027] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.250029] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.252041] Switching to clocksource hpet [ 0.253442] pnp: PnP ACPI init [ 0.253454] ACPI: bus type pnp registered [ 0.253843] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.253845] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.253847] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.253848] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.253850] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.253851] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.253853] pnp 00:00: [mem 0x000d4000-0x000d7fff] [ 0.253854] pnp 00:00: [mem 0x000d8000-0x000dbfff] [ 0.253856] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 0.253857] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.253859] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.253861] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.253862] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.253864] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.253865] pnp 00:00: [mem 0x00100000-0xdf9fffff] [ 0.253867] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.253869] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.253914] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.253917] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.253919] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.253920] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.253922] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.253924] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.253926] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.253928] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.253930] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.253932] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.253934] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.253936] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.253938] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.253940] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.253942] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.253944] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.253946] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.253949] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.253966] pnp 00:01: [bus 00-fe] [ 0.253968] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.253970] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.253971] pnp 00:01: [io 0x0d00-0xffff window] [ 0.253973] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.253975] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.253976] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.253978] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.253980] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.253981] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.253983] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.253984] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.253986] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.253988] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.253989] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.253991] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.253992] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.253994] pnp 00:01: [mem 0xdfa00000-0xfebfffff window] [ 0.253996] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 0.254037] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.254094] pnp 00:02: [io 0x0010-0x001f] [ 0.254095] pnp 00:02: [io 0x0090-0x009f] [ 0.254097] pnp 00:02: [io 0x0024-0x0025] [ 0.254098] pnp 00:02: [io 0x0028-0x0029] [ 0.254101] pnp 00:02: [io 0x002c-0x002d] [ 0.254102] pnp 00:02: [io 0x0030-0x0031] [ 0.254103] pnp 00:02: [io 0x0034-0x0035] [ 0.254105] pnp 00:02: [io 0x0038-0x0039] [ 0.254106] pnp 00:02: [io 0x003c-0x003d] [ 0.254108] pnp 00:02: [io 0x00a4-0x00a5] [ 0.254109] pnp 00:02: [io 0x00a8-0x00a9] [ 0.254111] pnp 00:02: [io 0x00ac-0x00ad] [ 0.254112] pnp 00:02: [io 0x00b0-0x00b5] [ 0.254113] pnp 00:02: [io 0x00b8-0x00b9] [ 0.254115] pnp 00:02: [io 0x00bc-0x00bd] [ 0.254116] pnp 00:02: [io 0x0050-0x0053] [ 0.254118] pnp 00:02: [io 0x0072-0x0077] [ 0.254119] pnp 00:02: [io 0x0400-0x047f] [ 0.254121] pnp 00:02: [io 0x0500-0x057f] [ 0.254122] pnp 00:02: [io 0x0800-0x080f] [ 0.254124] pnp 00:02: [io 0x15e0-0x15ef] [ 0.254125] pnp 00:02: [io 0x1600-0x167f] [ 0.254127] pnp 00:02: [mem 0xf8000000-0xfbffffff] [ 0.254128] pnp 00:02: [mem 0x00000000-0x00000fff] [ 0.254130] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.254131] pnp 00:02: [mem 0xfed10000-0xfed13fff] [ 0.254133] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.254134] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.254136] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 0.254187] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.254189] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.254191] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.254193] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.254195] system 00:02: [io 0x1600-0x167f] has been reserved [ 0.254198] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.254200] system 00:02: [mem 0x00000000-0x00000fff] could not be reserved [ 0.254202] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.254204] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.254206] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.254208] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.254210] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.254212] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.254253] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.254277] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.254285] pnp 00:04: [io 0x0000-0x000f] [ 0.254287] pnp 00:04: [io 0x0080-0x008f] [ 0.254288] pnp 00:04: [io 0x00c0-0x00df] [ 0.254291] pnp 00:04: [dma 4] [ 0.254314] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.254322] pnp 00:05: [io 0x0061] [ 0.254346] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.254354] pnp 00:06: [io 0x00f0] [ 0.254364] pnp 00:06: [irq 13] [ 0.254388] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.254396] pnp 00:07: [io 0x0070-0x0071] [ 0.254402] pnp 00:07: [irq 8] [ 0.254426] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.254434] pnp 00:08: [io 0x0060] [ 0.254435] pnp 00:08: [io 0x0064] [ 0.254440] pnp 00:08: [irq 1] [ 0.254465] pnp 00:08: Plug and Play ACPI device, IDs LEN0070 PNP0303 (active) [ 0.254477] pnp 00:09: [irq 12] [ 0.254502] pnp 00:09: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active) [ 0.254534] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.254559] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.255054] pnp: PnP ACPI: found 11 devices [ 0.255055] ACPI: ACPI bus type pnp unregistered [ 0.261634] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.261652] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.261660] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.261672] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.261675] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.261682] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff] [ 0.261687] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.261695] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.261699] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.261706] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.261711] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.261760] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.261762] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.261763] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.261765] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff] [ 0.261766] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] [ 0.261768] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff] [ 0.261770] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.261771] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff] [ 0.261773] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.261775] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.261776] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff] [ 0.261778] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.261845] NET: Registered protocol family 2 [ 0.262013] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.263584] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.264749] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.264874] TCP: Hash tables configured (established 524288 bind 65536) [ 0.264876] TCP: reno registered [ 0.264887] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.264916] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.265038] NET: Registered protocol family 1 [ 0.265052] pci 0000:00:02.0: Boot video device [ 0.265071] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.265075] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.265129] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.265133] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.265299] PCI: CLS 64 bytes, default 64 [ 0.265334] Unpacking initramfs... [ 0.374003] Freeing initrd memory: 5560k freed [ 0.374918] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.374922] software IO TLB [mem 0xd6995000-0xda994fff] (64MB) mapped at [ffff8800d6995000-ffff8800da994fff] [ 0.375435] audit: initializing netlink socket (disabled) [ 0.375449] type=2000 audit(1339846156.268:1): initialized [ 0.388397] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.389102] VFS: Disk quotas dquot_6.5.2 [ 0.389126] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.389195] msgmni has been set to 15774 [ 0.389335] alg: No test for stdrng (krng) [ 0.389368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.389370] io scheduler noop registered [ 0.389371] io scheduler deadline registered [ 0.389392] io scheduler cfq registered (default) [ 0.389746] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.389767] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.389768] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.389938] acpiphp: Slot [1] registered [ 0.390031] intel_idle: MWAIT substates: 0x21120 [ 0.390032] intel_idle: v0.4 model 0x2A [ 0.390033] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.390061] GHES: HEST is not enabled! [ 0.390108] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.410604] 0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19) is a 16550A [ 0.410761] Linux agpgart interface v0.103 [ 0.410828] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 0.410873] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.411649] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.411782] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.411884] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.417050] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.417056] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.417150] mousedev: PS/2 mouse device common for all mice [ 0.417182] rtc_cmos 00:07: RTC can wake from S4 [ 0.417318] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.417346] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.417438] cpuidle: using governor ladder [ 0.417543] cpuidle: using governor menu [ 0.417589] drop_monitor: Initializing network drop monitor service [ 0.417663] TCP: cubic registered [ 0.417750] NET: Registered protocol family 10 [ 0.418002] mip6: Mobile IPv6 [ 0.418005] NET: Registered protocol family 17 [ 0.418013] Key type dns_resolver registered [ 0.418202] PM: Hibernation image not present or could not be loaded. [ 0.418209] registered taskstats version 1 [ 0.419081] rtc_cmos 00:07: setting system clock to 2012-06-16 11:29:16 UTC (1339846156) [ 0.420096] Freeing unused kernel memory: 580k freed [ 0.420182] Write protecting the kernel read-only data: 6144k [ 0.420750] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.422276] Freeing unused kernel memory: 640k freed [ 0.424574] Freeing unused kernel memory: 688k freed [ 0.436251] udevd[59]: starting version 175 [ 0.450372] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k [ 0.450375] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 0.450426] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.450504] e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.450547] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 0.466011] sdhci: Secure Digital Host Controller Interface driver [ 0.466014] sdhci: Copyright(c) Pierre Ossman [ 0.466320] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4) [ 0.466759] mmc0: no vmmc regulator found [ 0.466859] Registered led device: mmc0:: [ 0.468196] ACPI: bus type usb registered [ 0.468237] usbcore: registered new interface driver usbfs [ 0.468253] usbcore: registered new interface driver hub [ 0.469326] SCSI subsystem initialized [ 0.472387] usbcore: registered new device driver usb [ 0.472870] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.476132] libata version 3.00 loaded. [ 0.488433] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.488436] ACPI: Thermal Zone [THM0] (54 C) [ 0.495517] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 0.645511] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:5b:d6:94 [ 0.645514] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 0.645565] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 0.645597] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 0.645602] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 0.645639] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.645643] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.645649] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.645687] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.649560] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.649567] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf252a000 [ 0.659226] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.659286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.659289] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.659292] usb usb1: Product: EHCI Host Controller [ 0.659294] usb usb1: Manufacturer: Linux 3.5.0-rc2+ ehci_hcd [ 0.659296] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.659556] hub 1-0:1.0: USB hub found [ 0.659562] hub 1-0:1.0: 3 ports detected [ 0.659637] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.659643] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.659686] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.659689] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.659694] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.659724] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.663597] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.663616] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2529000 [ 0.675193] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.675250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.675253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.675256] usb usb2: Product: EHCI Host Controller [ 0.675258] usb usb2: Manufacturer: Linux 3.5.0-rc2+ ehci_hcd [ 0.675260] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.675501] hub 2-0:1.0: USB hub found [ 0.675506] hub 2-0:1.0: 3 ports detected [ 0.675584] ahci 0000:00:1f.2: version 3.0 [ 0.675659] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 0.675761] ahci: SSS flag set, parallel bus scan disabled [ 0.691193] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 0.691197] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.691202] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.707694] scsi0 : ahci [ 0.707805] scsi1 : ahci [ 0.707875] scsi2 : ahci [ 0.707944] scsi3 : ahci [ 0.708013] scsi4 : ahci [ 0.708083] scsi5 : ahci [ 0.708725] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 43 [ 0.708728] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 43 [ 0.708729] ata3: DUMMY [ 0.708730] ata4: DUMMY [ 0.708733] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 43 [ 0.708734] ata6: DUMMY [ 0.970546] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.026421] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.026925] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.026928] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.026930] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.027319] ata1.00: ATA-8: INTEL SSDSA2CW300G3, 4PC10302, max UDMA/133 [ 1.027334] ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.027968] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.027971] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.027973] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.028378] ata1.00: configured for UDMA/133 [ 1.028568] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW30 4PC1 PQ: 0 ANSI: 5 [ 1.103088] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.103092] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.103580] hub 1-1:1.0: USB hub found [ 1.103807] hub 1-1:1.0: 6 ports detected [ 1.213997] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.345688] ata2: SATA link down (SStatus 0 SControl 300) [ 1.346209] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.346212] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.346628] hub 2-1:1.0: USB hub found [ 1.346801] hub 2-1:1.0: 8 ports detected [ 1.369626] Refined TSC clocksource calibration: 2491.905 MHz. [ 1.369640] Switching to clocksource tsc [ 1.417770] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd [ 1.511659] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 [ 1.511662] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.511664] usb 1-1.3: Product: Biometric Coprocessor [ 1.511665] usb 1-1.3: Manufacturer: UPEK [ 1.581516] usb 1-1.6: new high-speed USB device number 4 using ehci_hcd [ 1.672936] ata5: SATA link down (SStatus 0 SControl 300) [ 1.676657] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 1.676725] sd 0:0:0:0: [sda] Write Protect is off [ 1.676728] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.676749] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.677342] sda: sda1 sda2 < sda5 > [ 1.677713] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.680145] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217 [ 1.680149] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.680152] usb 1-1.6: Product: Integrated Camera [ 1.680154] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 1.721651] PM: Starting manual resume from disk [ 1.721654] PM: Hibernation image partition 8:5 present [ 1.721655] PM: Looking for hibernation image. [ 1.721980] PM: Image not found (code -22) [ 1.721982] PM: Hibernation image not present or could not be loaded. [ 1.733042] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.752735] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd [ 1.853203] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911 [ 1.853206] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.853208] usb 2-1.4: Product: F5521gw [ 1.853210] usb 2-1.4: Manufacturer: Lenovo [ 1.853211] usb 2-1.4: SerialNumber: 2AF518E978DCC3E0 [ 1.949346] udevd[334]: starting version 175 [ 1.956278] usb 2-1.5: new full-speed USB device number 4 using ehci_hcd [ 2.023258] ACPI: Requesting acpi_cpufreq [ 2.024237] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.024404] ACPI: Lid Switch [LID] [ 2.024480] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 2.024485] ACPI: Sleep Button [SLPB] [ 2.026550] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.026557] ACPI: Power Button [PWRF] [ 2.032703] wmi: Mapper loaded [ 2.050301] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6 [ 2.050305] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.050308] usb 2-1.5: Product: ISD-V4 [ 2.050310] usb 2-1.5: Manufacturer: Tablet [ 2.056725] cfg80211: Calling CRDA to update world regulatory domain [ 2.063652] ACPI: Battery Slot [BAT0] (battery present) [ 2.065798] ACPI: AC Adapter [AC] (on-line) [ 2.070177] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78) [ 2.076591] [drm] Initialized drm 1.1.0 20060810 [ 2.078045] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 2.078444] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251) [ 2.078447] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.078460] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 2.078468] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251) [ 2.078469] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.078475] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120320/utaddress-251) [ 2.078477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.078479] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.081773] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 2.081775] iwlwifi: Copyright(c) 2003-2012 Intel Corporation [ 2.081937] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [ 2.081940] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057a8000 [ 2.081942] iwlwifi 0000:03:00.0: HW Revision ID = 0x34 [ 2.082083] iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X [ 2.087380] i915 0000:00:02.0: power state changed by ACPI to D0 [ 2.087385] i915 0000:00:02.0: power state changed by ACPI to D0 [ 2.087726] i915 0000:00:02.0: setting latency timer to 64 [ 2.101785] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 2.105718] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 2.105726] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.105727] [drm] Driver supports precise vblank timestamp query. [ 2.105776] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.131832] tpm_tis 00:0a: A TPM error (6) occurred attempting to read a pcr value [ 2.131888] tpm_tis 00:0a: TPM is disabled/deactivated (0x6) [ 2.150051] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device [ 2.151922] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device [ 2.155081] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device [ 2.158085] Linux media interface: v0.10 [ 2.159684] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5 [ 2.163079] usbcore: registered new interface driver cdc_acm [ 2.163082] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.163421] Linux video capture interface: v2.00 [ 2.164406] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input6 [ 2.169116] Non-volatile memory driver v1.3 [ 2.169315] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301 [ 2.169759] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 2.169762] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 2.169764] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 2.169765] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 2.169767] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P enabled [ 2.169770] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 2.169839] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 2.170077] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio. [ 2.170913] usbcore: registered new interface driver wacom [ 2.173154] usbcore: registered new interface driver usbhid [ 2.173156] usbhid: USB HID core driver [ 2.174001] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 2.174004] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 2.174006] thinkpad_acpi: ThinkPad BIOS 8DET52WW (1.22 ), EC unknown [ 2.174009] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 42992QG [ 2.175690] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217) [ 2.177616] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 2.178111] thinkpad_acpi: radio switch found; radios are enabled [ 2.178599] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 2.178690] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7 [ 2.178770] usbcore: registered new interface driver uvcvideo [ 2.178772] USB Video Class driver (1.1.1) [ 2.178794] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 2.178795] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 2.180214] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6 [ 2.180217] iwlwifi 0000:03:00.0: Device SKU: 0x1F0 [ 2.180219] iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3 [ 2.180243] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 2.181582] Registered led device: phy0-led [ 2.181841] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 2.182674] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 2.182896] Registered led device: tpacpi::thinklight [ 2.182940] Registered led device: tpacpi::power [ 2.182965] Registered led device: tpacpi::standby [ 2.182988] Registered led device: tpacpi::thinkvantage [ 2.182997] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 2.183079] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 2.183472] usb 2-1.4: MAC-Address: 02:80:37:ec:02:00 [ 2.183651] cdc_ncm 2-1.4:1.6: usb0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, CDC NCM, 02:80:37:ec:02:00 [ 2.183685] usbcore: registered new interface driver cdc_ncm [ 2.183897] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device [ 2.183944] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device [ 2.183964] usbcore: registered new interface driver cdc_wdm [ 2.184230] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 2.193842] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 2.198332] usb 2-1.5: USB disconnect, device number 4 [ 2.204478] cfg80211: World regulatory domain updated: [ 2.204481] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2.204482] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.204484] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2.204485] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2.204486] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.204487] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2.635222] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.638950] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd [ 2.737333] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f [ 2.737343] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.737349] usb 1-1.4: Product: Broadcom Bluetooth Device [ 2.737353] usb 1-1.4: Manufacturer: Broadcom Corp [ 2.737358] usb 1-1.4: SerialNumber: EC55F9F6D0F3 [ 2.762282] Bluetooth: Core ver 2.16 [ 2.762297] NET: Registered protocol family 31 [ 2.762298] Bluetooth: HCI device and connection manager initialized [ 2.762299] Bluetooth: HCI socket layer initialized [ 2.762300] Bluetooth: L2CAP socket layer initialized [ 2.762303] Bluetooth: SCO socket layer initialized [ 2.763911] usbcore: registered new interface driver btusb [ 2.884008] fbcon: inteldrmfb (fb0) is primary device [ 3.046429] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00 [ 3.046446] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.069246] Console: switching to colour frame buffer device 170x48 [ 3.080494] fb0: inteldrmfb frame buffer device [ 3.080497] drm: registered panic notifier [ 3.086897] acpi device:01: registered as cooling_device4 [ 3.087208] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.087404] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 3.087721] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.087912] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 3.105748] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 3.417120] usb 2-1.5: new full-speed USB device number 5 using ehci_hcd [ 3.510259] usb 2-1.5: New USB device found, idVendor=056a, idProduct=0094 [ 3.510269] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.626678] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 3.635689] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 3.635915] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 3.636106] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 4.117813] Adding 11893756k swap on /dev/sda5. Priority:-1 extents:1 across:11893756k SS [ 4.151449] EXT4-fs (sda1): re-mounted. Opts: (null) [ 4.216900] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.253132] loop: module loaded [ 5.409057] RPC: Registered named UNIX socket transport module. [ 5.409063] RPC: Registered udp transport module. [ 5.409066] RPC: Registered tcp transport module. [ 5.409069] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.419849] FS-Cache: Loaded [ 5.433331] NFS: Registering the id_resolver key type [ 5.433360] Key type id_resolver registered [ 5.433376] FS-Cache: Netfs 'nfs' registered for caching [ 5.443669] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.223861] fuse init (API version 7.19) [ 7.167668] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 7.268254] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 7.269507] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.274556] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 7.274761] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 7.561120] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [ 7.561348] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 7.681136] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.693054] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.693587] cdc_ncm: usb0: network connection: disconnected [ 8.298777] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 8.779952] Bluetooth: RFCOMM TTY layer initialized [ 8.779968] Bluetooth: RFCOMM socket layer initialized [ 8.779973] Bluetooth: RFCOMM ver 1.11 [ 8.780983] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.780988] Bluetooth: BNEP filters: protocol multicast [ 8.972385] lp: driver loaded but no devices found [ 8.977342] ppdev: user-space parallel port driver [ 9.896496] colord[2575]: segfault at 8 ip 000000000040bc6d sp 00007fffb8ac4950 error 4 in colord[400000+20000] [ 10.637173] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 10.937763] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16 [ 14.117639] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 14.188388] usb 1-1.4: USB disconnect, device number 5 [ 19.051404] wlan0: authenticate with a0:cf:5b:9f:67:fe [ 19.074712] wlan0: send auth to a0:cf:5b:9f:67:fe (try 1/3) [ 19.276873] wlan0: send auth to a0:cf:5b:9f:67:fe (try 2/3) [ 19.277552] wlan0: authenticated [ 19.280877] wlan0: associate with a0:cf:5b:9f:67:fe (try 1/3) [ 19.304603] wlan0: RX AssocResp from a0:cf:5b:9f:67:fe (capab=0x111 status=0 aid=2) [ 19.304606] wlan0: associated [ 19.307526] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 19.307606] cfg80211: Calling CRDA for country: DE [ 19.311285] cfg80211: Regulatory domain changed to country: DE [ 19.311288] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.311290] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 19.311292] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 19.311293] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 19.311295] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 33.077504] wlan0: authenticate with a0:cf:5b:9f:67:f1 [ 33.096627] wlan0: send auth to a0:cf:5b:9f:67:f1 (try 1/3) [ 33.097800] wlan0: authenticated [ 33.099164] wlan0: waiting for beacon from a0:cf:5b:9f:67:f1 [ 33.105554] wlan0: associate with a0:cf:5b:9f:67:f1 (try 1/3) [ 33.108914] wlan0: RX AssocResp from a0:cf:5b:9f:67:f1 (capab=0x431 status=0 aid=15) [ 33.108923] wlan0: associated
Attachment:
signature.asc
Description: This is a digitally signed message part