Bug#677655: 3.4-trunk-486: kernel oops: EIP is at __destroy_inode+0x56/0x8d
Hi Jonathan,
2012/6/15 Jonathan Nieder <jrnieder@gmail.com>:
> Hi Martin-Éric,
>
> Martin-Éric Racine wrote:
>
>> I'm not sure if it's too early to report on kernel 3.4 or not, but
>> here it goes:
>
> Any package uploaded to the archive is open for bug reports. :)
>
> Could you send the full "oops" trace, starting at the first BUG line?
> (It should include the text "Not tainted".) Even better would be full
> "dmesg" output from booting and reproducing the bug.
Here's the dmesg output at bootup, right after the first few oopses
have started to appear.
Cheers!
Martin-Éric
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.4-trunk-486 (Debian 3.4.1-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 Wed Jun 6 14:24:16 UTC 2012
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
<6>[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<6>[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fb0000 (usable)
<6>[ 0.000000] BIOS-e820: 0000000037fb0000 - 0000000037fb3000 (ACPI NVS)
<6>[ 0.000000] BIOS-e820: 0000000037fb3000 - 0000000037fc0000 (ACPI data)
<6>[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
<6>[ 0.000000] DMI 2.2 present.
<7>[ 0.000000] DMI: First International Computer, Inc. ION603/ION603, BIOS 6.00 PG 11/08/2007
<7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>[ 0.000000] last_pfn = 0x37fb0 max_arch_pfn = 0x100000
<7>[ 0.000000] initial memory mapped : 0 - 01800000
<7>[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 12288
<6>[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
<7>[ 0.000000] 0000000000 - 0000400000 page 4k
<7>[ 0.000000] 0000400000 - 0037400000 page 2M
<7>[ 0.000000] 0037400000 - 00377fe000 page 4k
<7>[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
<6>[ 0.000000] RAMDISK: 35fca000 - 36fdd000
<4>[ 0.000000] ACPI: RSDP 000f5910 00014 (v00 AMDGX3)
<4>[ 0.000000] ACPI: RSDT 37fb3000 00028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
<4>[ 0.000000] ACPI: FACP 37fb3080 00074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
<4>[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 (20120320/tbfadt-629)
<4>[ 0.000000] ACPI: DSDT 37fb3100 01581 (v01 AMDGX3 AWRDACPI 00001017 MSFT 03000000)
<4>[ 0.000000] ACPI: FACS 37fb0000 00040
<5>[ 0.000000] 7MB HIGHMEM available.
<5>[ 0.000000] 887MB LOWMEM available.
<6>[ 0.000000] mapped low ram: 0 - 377fe000
<6>[ 0.000000] low ram: 0 - 377fe000
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] DMA 0x00000010 -> 0x00001000
<4>[ 0.000000] Normal 0x00001000 -> 0x000377fe
<4>[ 0.000000] HighMem 0x000377fe -> 0x00037fb0
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] Early memory PFN ranges
<4>[ 0.000000] 0: 0x00000010 -> 0x0000009e
<4>[ 0.000000] 0: 0x00000100 -> 0x00037fb0
<7>[ 0.000000] On node 0 totalpages: 229182
<7>[ 0.000000] free_area_init_node: node 0, pgdat c13e6e08, node_mem_map f70fd200
<7>[ 0.000000] DMA zone: 32 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
<7>[ 0.000000] Normal zone: 1744 pages used for memmap
<7>[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 16 pages used for memmap
<7>[ 0.000000] HighMem zone: 1954 pages, LIFO batch:0
<6>[ 0.000000] Using APIC driver default
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x9c10
<6>[ 0.000000] No local APIC present or hardware disabled
<6>[ 0.000000] APIC: disable apic facility
<6>[ 0.000000] APIC: switched to apic NOOP
<7>[ 0.000000] nr_irqs_gsi: 16
<6>[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
<6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
<6>[ 0.000000] Allocating PCI resources starting at 37fc0000 (gap: 37fc0000:c8030000)
<6>[ 0.000000] Booting paravirtualized kernel on bare hardware
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227390
<5>[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-trunk-486 root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro panic=15 pnpbios=off quiet splash
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Initializing CPU#0
<6>[ 0.000000] Initializing HighMem for node 0 (000377fe:00037fb0)
<6>[ 0.000000] Memory: 887248k/917184k available (2636k kernel code, 29480k reserved, 1389k data, 444k init, 7880k highmem)
<6>[ 0.000000] virtual kernel memory layout:
<6>[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
<6>[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
<6>[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
<6>[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
<6>[ 0.000000] .init : 0xc13ef000 - 0xc145e000 ( 444 kB)
<6>[ 0.000000] .data : 0xc129336c - 0xc13ee900 (1389 kB)
<6>[ 0.000000] .text : 0xc1000000 - 0xc129336c (2636 kB)
<6>[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
<6>[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
<7>[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
<6>[ 0.000000] Console: colour dummy device 80x25
<6>[ 0.000000] console [tty0] enabled
<4>[ 0.000000] Fast TSC calibration using PIT
<4>[ 0.000000] Detected 498.061 MHz processor.
<6>[ 0.008007] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.12 BogoMIPS (lpj=1992244)
<6>[ 0.008039] pid_max: default: 32768 minimum: 301
<6>[ 0.008259] Security Framework initialized
<6>[ 0.008289] AppArmor: AppArmor disabled by boot time parameter
<6>[ 0.008366] Mount-cache hash table entries: 512
<6>[ 0.012382] Initializing cgroup subsys cpuacct
<6>[ 0.012399] Initializing cgroup subsys memory
<6>[ 0.012440] Initializing cgroup subsys devices
<6>[ 0.012456] Initializing cgroup subsys freezer
<6>[ 0.012472] Initializing cgroup subsys net_cls
<6>[ 0.012488] Initializing cgroup subsys blkio
<6>[ 0.012521] Initializing cgroup subsys perf_event
<6>[ 0.012650] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
<6>[ 0.014022] ACPI: Core revision 20120320
<4>[ 0.019711] ACPI: setting ELCR to 0200 (from 0c20)
<6>[ 0.020278] Performance Events: no PMU driver, software events only.
<4>[ 0.020690] NMI watchdog: disabled (cpu0): hardware events not enabled
<6>[ 0.021249] devtmpfs: initialized
<6>[ 0.024503] PM: Registering ACPI NVS region [mem 0x37fb0000-0x37fb2fff] (12288 bytes)
<6>[ 0.025062] dummy:
<6>[ 0.025330] NET: Registered protocol family 16
<6>[ 0.025967] EISA bus registered
<6>[ 0.026254] ACPI: bus type pci registered
<6>[ 0.027985] PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=0
<6>[ 0.028021] PCI: Using configuration type 1 for base access
<6>[ 0.032271] bio: create slab <bio-0> at 0
<6>[ 0.032632] ACPI: Added _OSI(Module Device)
<6>[ 0.032649] ACPI: Added _OSI(Processor Device)
<6>[ 0.032665] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.032687] ACPI: Added _OSI(Processor Aggregator Device)
<7>[ 0.037368] ACPI: EC: Look up EC in DSDT
<6>[ 0.046349] ACPI: Interpreter enabled
<6>[ 0.046403] ACPI: (supports S0 S1 S5)
<6>[ 0.046505] ACPI: Using PIC for interrupt routing
<6>[ 0.058615] ACPI: No dock devices found.
<6>[ 0.058652] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
<6>[ 0.058993] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
<7>[ 0.059491] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
<7>[ 0.059515] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xac17] (ignored)
<7>[ 0.059539] pci_root PNP0A03:00: host bridge window [io 0xac20-0xffff] (ignored)
<7>[ 0.059563] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
<7>[ 0.059587] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
<7>[ 0.059612] pci_root PNP0A03:00: host bridge window [mem 0x40500000-0xfebfffff] (ignored)
<7>[ 0.059633] PCI: root bus 00: using default resources
<6>[ 0.059908] PCI host bridge to bus 0000:00
<6>[ 0.059929] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
<6>[ 0.059951] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
<7>[ 0.060121] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
<7>[ 0.060270] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f]
<7>[ 0.060384] pci 0000:00:01.0: reg 14: [io 0x9e00-0x9e07]
<7>[ 0.061195] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
<7>[ 0.061495] pci 0000:00:01.1: reg 10: [mem 0xd0000000-0xdfffffff]
<7>[ 0.061710] pci 0000:00:01.1: reg 14: [mem 0xefff0000-0xefff3fff]
<7>[ 0.061927] pci 0000:00:01.1: reg 18: [mem 0xeffec000-0xeffeffff]
<7>[ 0.062142] pci 0000:00:01.1: reg 1c: [mem 0xeffe8000-0xeffebfff]
<7>[ 0.062357] pci 0000:00:01.1: reg 20: [mem 0xefff8000-0xefffbfff]
<7>[ 0.063093] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
<7>[ 0.063349] pci 0000:00:01.2: reg 10: [mem 0xefff4000-0xefff7fff]
<7>[ 0.064722] pci 0000:00:0d.0: [10ec:8139] type 00 class 0x020000
<7>[ 0.064762] pci 0000:00:0d.0: reg 10: [io 0xfc00-0xfcff]
<7>[ 0.064792] pci 0000:00:0d.0: reg 14: [mem 0xeffff000-0xeffff0ff]
<7>[ 0.064887] pci 0000:00:0d.0: supports D1 D2
<7>[ 0.064906] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
<7>[ 0.065056] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
<7>[ 0.065372] pci 0000:00:0f.0: reg 10: [io 0x6000-0x6007]
<7>[ 0.065636] pci 0000:00:0f.0: reg 14: [io 0x6100-0x61ff]
<7>[ 0.065900] pci 0000:00:0f.0: reg 18: [io 0x6200-0x623f]
<7>[ 0.066164] pci 0000:00:0f.0: reg 1c: [io 0x0000-0x001f]
<7>[ 0.066433] pci 0000:00:0f.0: reg 20: [io 0x9d00-0x9d7f]
<7>[ 0.066714] pci 0000:00:0f.0: reg 24: [io 0x9c00-0x9c3f]
<7>[ 0.067312] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
<7>[ 0.068292] pci 0000:00:0f.2: reg 20: [io 0xff00-0xff0f]
<7>[ 0.068996] pci 0000:00:0f.3: [1022:2093] type 00 class 0x040100
<7>[ 0.069270] pci 0000:00:0f.3: reg 10: [io 0xfe00-0xfe7f]
<7>[ 0.070679] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
<7>[ 0.071085] pci 0000:00:0f.4: reg 10: [mem 0xefffe000-0xefffefff]
<7>[ 0.072710] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
<7>[ 0.073061] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
<7>[ 0.073421] pci 0000:00:0f.5: reg 10: [mem 0xefffd000-0xefffdfff]
<7>[ 0.075016] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
<7>[ 0.075255] pci_bus 0000:00: on NUMA node 0
<7>[ 0.075278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>[ 0.075815] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
<6>[ 0.084693] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
<6>[ 0.085433] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
<6>[ 0.086026] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
<6>[ 0.086762] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
<6>[ 0.087392] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
<6>[ 0.087428] vgaarb: loaded
<6>[ 0.087440] vgaarb: bridge control possible 0000:00:01.1
<6>[ 0.087686] PCI: Using ACPI for IRQ routing
<7>[ 0.087703] PCI: pci_cache_line_size set to 32 bytes
<7>[ 0.088218] reserve RAM buffer: 000000000009e800 - 000000000009ffff
<7>[ 0.088238] reserve RAM buffer: 0000000037fb0000 - 0000000037ffffff
<6>[ 0.089007] Switching to clocksource pit
<6>[ 0.095980] pnp: PnP ACPI init
<6>[ 0.096080] ACPI: bus type pnp registered
<7>[ 0.096553] pnp 00:00: [mem 0x000f0000-0x000fffff]
<7>[ 0.096574] pnp 00:00: [mem 0x37fb0000-0x37fbffff]
<7>[ 0.096594] pnp 00:00: [mem 0xffff0000-0xffffffff]
<7>[ 0.096613] pnp 00:00: [mem 0x00000000-0x0009ffff]
<7>[ 0.096633] pnp 00:00: [mem 0x00100000-0x37faffff]
<7>[ 0.096652] pnp 00:00: [mem 0x40400000-0x4043ffff]
<7>[ 0.096672] pnp 00:00: [mem 0xfee00000-0xfee00fff]
<6>[ 0.096924] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
<6>[ 0.096951] system 00:00: [mem 0x37fb0000-0x37fbffff] could not be reserved
<6>[ 0.096977] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
<6>[ 0.097002] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
<6>[ 0.097028] system 00:00: [mem 0x00100000-0x37faffff] could not be reserved
<6>[ 0.097053] system 00:00: [mem 0x40400000-0x4043ffff] has been reserved
<6>[ 0.097079] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
<7>[ 0.097106] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
<7>[ 0.097521] pnp 00:01: [bus 00-ff]
<7>[ 0.097541] pnp 00:01: [io 0x0cf8-0x0cff]
<7>[ 0.097561] pnp 00:01: [io 0x0000-0x0cf7 window]
<7>[ 0.097581] pnp 00:01: [io 0x0d00-0xac17 window]
<7>[ 0.097600] pnp 00:01: [io 0xac20-0xffff window]
<7>[ 0.097621] pnp 00:01: [mem 0x000a0000-0x000bffff window]
<7>[ 0.097642] pnp 00:01: [mem 0x000c8000-0x000dffff window]
<7>[ 0.097663] pnp 00:01: [mem 0x40500000-0xfebfffff window]
<7>[ 0.097859] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[ 0.098939] pnp 00:02: [io 0x0010-0x001f]
<7>[ 0.098958] pnp 00:02: [io 0x0022-0x002d]
<7>[ 0.099034] pnp 00:02: [io 0x0030-0x003f]
<7>[ 0.099052] pnp 00:02: [io 0x0044-0x005f]
<7>[ 0.099070] pnp 00:02: [io 0x0060]
<7>[ 0.099087] pnp 00:02: [io 0x0062-0x0064]
<7>[ 0.099105] pnp 00:02: [io 0x0065-0x006f]
<7>[ 0.099124] pnp 00:02: [io 0x0074-0x007f]
<7>[ 0.099142] pnp 00:02: [io 0x0091-0x0093]
<7>[ 0.099171] pnp 00:02: [io 0x00a2-0x00bf]
<7>[ 0.099189] pnp 00:02: [io 0x00e0-0x00ef]
<7>[ 0.099207] pnp 00:02: [io 0x04d0-0x04d1]
<7>[ 0.099226] pnp 00:02: [io 0x0480-0x048f]
<4>[ 0.099298] pnp 00:02: disabling [io 0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io 0x0000-0x001f]
<6>[ 0.099559] system 00:02: [io 0x04d0-0x04d1] has been reserved
<6>[ 0.099584] system 00:02: [io 0x0480-0x048f] has been reserved
<7>[ 0.099610] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.099699] pnp 00:03: [dma 4]
<7>[ 0.099717] pnp 00:03: [io 0x0000-0x000f]
<7>[ 0.099735] pnp 00:03: [io 0x0080-0x0090]
<7>[ 0.099753] pnp 00:03: [io 0x0094-0x009f]
<7>[ 0.099772] pnp 00:03: [io 0x00c0-0x00df]
<7>[ 0.099948] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
<7>[ 0.100025] pnp 00:04: [io 0x0070-0x0073]
<7>[ 0.100046] pnp 00:04: [irq 8]
<7>[ 0.100224] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[ 0.100287] pnp 00:05: [io 0x0061]
<7>[ 0.100475] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
<7>[ 0.100551] pnp 00:06: [io 0x00f0-0x00ff]
<7>[ 0.100570] pnp 00:06: [irq 13]
<7>[ 0.100751] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
<6>[ 0.100795] pnp: PnP ACPI: found 7 devices
<6>[ 0.100810] ACPI: ACPI bus type pnp unregistered
<6>[ 0.100824] PnPBIOS: Disabled
<6>[ 0.146739] Switching to clocksource acpi_pm
<6>[ 0.146840] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f]
<7>[ 0.146935] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
<7>[ 0.146957] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
<6>[ 0.147274] NET: Registered protocol family 2
<6>[ 0.147563] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.148514] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.151714] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.152698] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.152715] TCP: reno registered
<6>[ 0.152735] UDP hash table entries: 512 (order: 1, 8192 bytes)
<6>[ 0.152781] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
<6>[ 0.153062] NET: Registered protocol family 1
<7>[ 0.153192] pci 0000:00:01.1: Boot video device
<4>[ 0.155361] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
<4>[ 0.155382] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<7>[ 0.155399] PCI: setting IRQ 11 as level-triggered
<7>[ 0.224406] PCI: CLS 32 bytes, default 32
<6>[ 0.224647] Unpacking initramfs...
<6>[ 3.280752] Freeing initrd memory: 16460k freed
<6>[ 3.300615] audit: initializing netlink socket (disabled)
<5>[ 3.300668] type=2000 audit(1339788693.298:1): initialized
<4>[ 3.417160] highmem bounce pool size: 64 pages
<6>[ 3.417192] HugeTLB registered 4 MB page size, pre-allocated 0 pages
<5>[ 3.420401] VFS: Disk quotas dquot_6.5.2
<4>[ 3.420477] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>[ 3.420770] msgmni has been set to 1749
<6>[ 3.421442] alg: No test for stdrng (krng)
<6>[ 3.421558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 3.421580] io scheduler noop registered
<6>[ 3.421595] io scheduler deadline registered
<6>[ 3.421654] io scheduler cfq registered (default)
<6>[ 3.422074] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[ 3.422221] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<6>[ 3.422239] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<4>[ 3.424866] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
<7>[ 3.424884] PCI: setting IRQ 10 as level-triggered
<4>[ 3.515432] vmap allocation for size 134221824 failed: use vmalloc=<size> to increase size.
<3>[ 3.560765] lxfb 0000:00:01.1: failed to map frame buffer or controller registers
<4>[ 3.560837] lxfb: probe of 0000:00:01.1 failed with error -12
<4>[ 3.561066] vesafb: cannot reserve video memory at 0xd0000000
<6>[ 3.561093] vesafb: mode is 800x600x32, linelength=3200, pages=0
<6>[ 3.561108] vesafb: scrolling: redraw
<6>[ 3.561130] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
<6>[ 3.562515] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1920k, total 1920k
<6>[ 3.587381] Console: switching to colour frame buffer device 100x37
<6>[ 3.615463] fb0: VESA VGA frame buffer device
<6>[ 3.615666] GHES: HEST is not enabled!
<6>[ 3.615747] isapnp: Scanning for PnP cards...
<6>[ 3.927511] isapnp: No Plug & Play device found
<6>[ 3.927724] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>[ 3.929935] Linux agpgart interface v0.103
<6>[ 3.931073] i8042: PNP: No PS/2 controller found. Probing ports directly.
<3>[ 4.808499] i8042: Can't read CTR while initializing i8042
<6>[ 4.809003] Refined TSC clocksource calibration: 498.050 MHz.
<6>[ 4.809029] Switching to clocksource tsc
<4>[ 4.809063] i8042: probe of i8042 failed with error -5
<6>[ 4.809562] mousedev: PS/2 mouse device common for all mice
<6>[ 4.810460] rtc_cmos 00:04: RTC can wake from S4
<6>[ 4.810832] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
<6>[ 4.810889] rtc0: alarms up to one day, 242 bytes nvram
<6>[ 4.811186] EISA: Probing bus 0 at eisa.0
<4>[ 4.811215] Cannot allocate resource for EISA slot 1
<4>[ 4.811279] Cannot allocate resource for EISA slot 6
<6>[ 4.811318] EISA: Detected 0 cards.
<6>[ 4.811333] cpuidle: using governor ladder
<6>[ 4.811348] cpuidle: using governor menu
<6>[ 4.812060] TCP: cubic registered
<6>[ 4.812207] NET: Registered protocol family 10
<6>[ 4.813189] Mobile IPv6
<6>[ 4.813205] NET: Registered protocol family 17
<5>[ 4.813231] Registering the dns_resolver key type
<6>[ 4.813422] Using IPI Shortcut mode
<7>[ 4.813949] PM: Hibernation image not present or could not be loaded.
<6>[ 4.814004] registered taskstats version 1
<6>[ 4.815178] rtc_cmos 00:04: setting system clock to 2012-06-15 19:31:34 UTC (1339788694)
<6>[ 4.815464] Initializing network drop monitor service
<6>[ 4.815890] Freeing unused kernel memory: 444k freed
<6>[ 4.816781] Write protecting the kernel text: 2640k
<6>[ 4.816954] Write protecting the kernel read-only data: 1092k
<30>[ 5.292599] udevd[46]: starting version 175
<6>[ 5.493508] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
<6>[ 5.493582] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
<6>[ 5.496126] 8139too: 8139too Fast Ethernet driver 0.9.28
<6>[ 5.523592] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
<6>[ 5.523626] ACPI: Power Button [PWRB]
<6>[ 5.531990] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
<6>[ 5.532091] ACPI: Sleep Button [SLPB]
<6>[ 5.532569] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
<6>[ 5.532595] ACPI: Power Button [PWRF]
<4>[ 5.539258] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<5>[ 5.582937] SCSI subsystem initialized
<6>[ 5.589737] 8139too 0000:00:0d.0: eth0: RealTek RTL8139 at 0xfc00, 00:40:ca:9d:f0:50, IRQ 11
<6>[ 5.677907] usbcore: registered new interface driver usbfs
<6>[ 5.678041] usbcore: registered new interface driver hub
<6>[ 5.683842] usbcore: registered new device driver usb
<6>[ 5.686289] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 5.686574] ehci_hcd 0000:00:0f.5: setting latency timer to 64
<6>[ 5.686618] ehci_hcd 0000:00:0f.5: EHCI Host Controller
<6>[ 5.686704] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
<7>[ 5.707233] libata version 3.00 loaded.
<6>[ 5.708265] ehci_hcd 0000:00:0f.5: irq 11, io mem 0xefffd000
<6>[ 5.720103] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
<6>[ 5.720224] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 5.720248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.720269] usb usb1: Product: EHCI Host Controller
<6>[ 5.720288] usb usb1: Manufacturer: Linux 3.4-trunk-486 ehci_hcd
<6>[ 5.720307] usb usb1: SerialNumber: 0000:00:0f.5
<6>[ 5.721021] hub 1-0:1.0: USB hub found
<6>[ 5.721052] hub 1-0:1.0: 4 ports detected
<6>[ 5.723259] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<7>[ 5.723526] ohci_hcd 0000:00:0f.4: setting latency timer to 64
<6>[ 5.723570] ohci_hcd 0000:00:0f.4: OHCI Host Controller
<6>[ 5.723637] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
<6>[ 5.723708] ohci_hcd 0000:00:0f.4: irq 11, io mem 0xefffe000
<6>[ 5.797135] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 5.797162] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.797184] usb usb2: Product: OHCI Host Controller
<6>[ 5.797202] usb usb2: Manufacturer: Linux 3.4-trunk-486 ohci_hcd
<6>[ 5.797221] usb usb2: SerialNumber: 0000:00:0f.4
<6>[ 5.797950] hub 2-0:1.0: USB hub found
<6>[ 5.797983] hub 2-0:1.0: 4 ports detected
<6>[ 5.808872] scsi0 : pata_cs5536
<6>[ 5.812353] scsi1 : pata_cs5536
<6>[ 5.813364] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
<6>[ 5.813385] ata2: DUMMY
<6>[ 5.976734] ata1.00: ATA-7: FUJITSU MHW2040AT, 0000000B, max UDMA/100
<6>[ 5.976761] ata1.00: 78140160 sectors, multi 16: LBA
<6>[ 5.992463] ata1.00: configured for UDMA/100
<5>[ 5.992929] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2040A 0000 PQ: 0 ANSI: 5
<5>[ 6.022998] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
<5>[ 6.023299] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 6.023322] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 6.023456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 6.136978] sda: sda1 sda2 < sda5 >
<5>[ 6.139429] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 6.280130] usb 2-1: new low-speed USB device number 2 using ohci_hcd
<6>[ 6.498137] usb 2-1: New USB device found, idVendor=03f9, idProduct=0100
<6>[ 6.498164] usb 2-1: New USB device strings: Mfr=4, Product=26, SerialNumber=0
<6>[ 6.498185] usb 2-1: Product: Keytronic USB Keyboard
<6>[ 6.498203] usb 2-1: Manufacturer: Key Tronic
<6>[ 6.559786] input: Key Tronic Keytronic USB Keyboard as /devices/pci0000:00/0000:00:0f.4/usb2/2-1/2-1:1.0/input/input3
<6>[ 6.560341] generic-usb 0003:03F9:0100.0001: input,hidraw0: USB HID v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on usb-0000:00:0f.4-1/input0
<6>[ 6.561331] usbcore: registered new interface driver usbhid
<6>[ 6.561349] usbhid: USB HID core driver
<6>[ 15.834801] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
<6>[ 15.834826] EXT4-fs (sda1): write access will be enabled during recovery
<6>[ 17.648639] EXT4-fs (sda1): recovery complete
<6>[ 17.655457] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<30>[ 21.301000] udevd[246]: starting version 175
<6>[ 22.850136] ACPI: AC Adapter [AC] (on-line)
<4>[ 23.157204] ACPI Warning: 0x00006100-0x000061ff SystemIO conflicts with Region \_SB_.GPIO 1 (20120320/utaddress-251)
<6>[ 23.157251] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
<3>[ 23.157383] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
<4>[ 23.157443] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
<6>[ 23.311714] AMD Geode RNG detected
<4>[ 23.666722] microcode: AMD CPU family 0x5 not supported
<5>[ 24.084283] geode-aes: GEODE AES engine enabled.
<7>[ 24.491191] snd_cs5535audio 0000:00:0f.3: setting latency timer to 64
<6>[ 28.050599] Adding 1646624k swap on /dev/sda5. Priority:-1 extents:1 across:1646624k
<6>[ 28.167997] EXT4-fs (sda1): re-mounted. Opts: (null)
<6>[ 28.721401] EXT4-fs (sda1): re-mounted. Opts: (null)
<1>[ 29.595342] BUG: unable to handle kernel paging request at ffffb4ff
<1>[ 29.595373] IP: [<c10b698e>] __destroy_inode+0x56/0x8d
<4>[ 29.595413] *pde = 01462067 *pte = 00000000
<4>[ 29.595437] Oops: 0000 [#1]
<4>[ 29.595453] Modules linked in: snd_cs5535audio snd_ac97_codec snd_pcm snd_page_alloc ecb scx200_acb snd_seq cryptd aes_i586 snd_seq_device snd_timer aes_generic i2c_core snd geode_aes geode_rng rng_core soundcore ac97_bus cs5535_mfd processor ac thermal_sys evdev ext4 crc16 jbd2 mbcache msr usbhid hid sd_mod crc_t10dif ata_generic ohci_hcd pata_cs5536 ehci_hcd libata usbcore scsi_mod usb_common button 8139too 8139cp mii [last unloaded: scsi_wait_scan]
<4>[ 29.595661]
<4>[ 29.595679] Pid: 693, comm: mount Not tainted 3.4-trunk-486 #1 First International Computer, Inc. ION603/ION603
<4>[ 29.595714] EIP: 0060:[<c10b698e>] EFLAGS: 00010286 CPU: 0
<4>[ 29.595737] EIP is at __destroy_inode+0x56/0x8d
<4>[ 29.595756] EAX: ffffb4ff EBX: f54f1d38 ECX: f6871ed8 EDX: ffffb4fe
<4>[ 29.595777] ESI: f55475d8 EDI: f54f1d38 EBP: 00000000 ESP: f6871ef0
<4>[ 29.595798] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
<4>[ 29.595818] CR0: 8005003b CR2: ffffb4ff CR3: 36877000 CR4: 00000090
<4>[ 29.595839] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
<4>[ 29.595856] DR6: ffff0ff0 DR7: 00000400
<0>[ 29.595876] Process mount (pid: 693, ti=f6870000 task=f37f1810 task.ti=f6870000)
<0>[ 29.595892] Stack:
<4>[ 29.595903] f54f1d38 c10b6cdd f5538898 c10b5104 f5538898 f6871f20 f6871f20 c10b5149
<4>[ 29.595946] f55388f8 f5817c00 f5817c80 c10b5362 f55b8a78 f55389f8 f5817c00 00000000
<4>[ 29.595988] fffffff3 c10a9dd3 00000000 00000000 00000000 0000002e 00000027 f5812090
<0>[ 29.596030] Call Trace:
<4>[ 29.596036] [<c10b6cdd>] ? destroy_inode+0x1a/0x3e
<4>[ 29.596036] [<c10b5104>] ? dentry_kill+0x7f/0x8c
<4>[ 29.596036] [<c10b5149>] ? shrink_dentry_list+0x38/0x62
<4>[ 29.596036] [<c10b5362>] ? shrink_dcache_sb+0x40/0x51
<4>[ 29.596036] [<c10a9dd3>] ? do_remount_sb+0x5b/0x11c
<4>[ 29.596036] [<c10b9acc>] ? do_mount+0x1de/0x5ca
<4>[ 29.596036] [<c113b3f0>] ? _copy_from_user+0x28/0x47
<4>[ 29.596036] [<c108b524>] ? memdup_user+0x26/0x43
<4>[ 29.596036] [<c10b9f21>] ? sys_mount+0x67/0x96
<4>[ 29.596036] [<c128e6ec>] ? syscall_call+0x7/0xb
<0>[ 29.596036] Code: 85 c0 75 0f ba ee 00 00 00 b8 58 a4 33 c1 e8 87 6e f6 ff 8b 43 1c ff 88 c4 01 00 00 8b 43 10 8d 50 ff 83 fa fd 77 14 85 c0 74 10 <ff> 08 0f 94 c2 84 d2 74 07 31 d2 e8 ee be fa ff 8b 43 14 8d 50
<0>[ 29.596036] EIP: [<c10b698e>] __destroy_inode+0x56/0x8d SS:ESP 0068:f6871ef0
<4>[ 29.596036] CR2: 00000000ffffb4ff
<4>[ 29.596036] ---[ end trace fd18a118a8987593 ]---
<6>[ 32.947981] 8139too 0000:00:0d.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
<7>[ 43.184058] eth0: no IPv6 routers present
<3>[ 44.935839] snd-malloc: invalid device type 0
<3>[ 44.937263] snd-malloc: invalid device type 0
<3>[ 45.051141] snd-malloc: invalid device type 0
<3>[ 45.055418] snd-malloc: invalid device type 0
<3>[ 45.057633] snd-malloc: invalid device type 0
<3>[ 45.058827] snd-malloc: invalid device type 0
<3>[ 45.060610] snd-malloc: invalid device type 0
<3>[ 45.065459] snd-malloc: invalid device type 0
<3>[ 45.066813] snd-malloc: invalid device type 0
<3>[ 45.067973] snd-malloc: invalid device type 0
<3>[ 45.070423] snd-malloc: invalid device type 0
<3>[ 45.075135] snd-malloc: invalid device type 0
<3>[ 45.077009] snd-malloc: invalid device type 0
<3>[ 45.078250] snd-malloc: invalid device type 0
<3>[ 45.079940] snd-malloc: invalid device type 0
<3>[ 45.084997] snd-malloc: invalid device type 0
<3>[ 45.086257] snd-malloc: invalid device type 0
<3>[ 45.087416] snd-malloc: invalid device type 0
<3>[ 45.091602] snd-malloc: invalid device type 0
<3>[ 45.096478] snd-malloc: invalid device type 0
<3>[ 45.217811] snd-malloc: invalid device type 0
<3>[ 45.219016] snd-malloc: invalid device type 0
<3>[ 45.221379] snd-malloc: invalid device type 0
<3>[ 45.226630] snd-malloc: invalid device type 0
<6>[ 50.203720] Bluetooth: Core ver 2.16
<6>[ 50.203835] NET: Registered protocol family 31
<6>[ 50.203852] Bluetooth: HCI device and connection manager initialized
<6>[ 50.205808] Bluetooth: HCI socket layer initialized
<6>[ 50.205832] Bluetooth: L2CAP socket layer initialized
<6>[ 50.205864] Bluetooth: SCO socket layer initialized
<6>[ 50.246180] Bluetooth: RFCOMM TTY layer initialized
<6>[ 50.246211] Bluetooth: RFCOMM socket layer initialized
<6>[ 50.246227] Bluetooth: RFCOMM ver 1.11
<6>[ 50.473725] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 50.473750] Bluetooth: BNEP filters: protocol multicast
<1>[ 62.028518] BUG: unable to handle kernel paging request at ffffb4ff
<1>[ 62.028546] IP: [<c10b698e>] __destroy_inode+0x56/0x8d
<4>[ 62.028586] *pde = 01462067 *pte = 00000000
<4>[ 62.028609] Oops: 0000 [#2]
<4>[ 62.028625] Modules linked in: mperf cpufreq_conservative cpufreq_userspace cpufreq_powersave cpufreq_stats bnep rfcomm bluetooth rfkill snd_cs5535audio snd_ac97_codec snd_pcm snd_page_alloc ecb scx200_acb snd_seq cryptd aes_i586 snd_seq_device snd_timer aes_generic i2c_core snd geode_aes geode_rng rng_core soundcore ac97_bus cs5535_mfd processor ac thermal_sys evdev ext4 crc16 jbd2 mbcache msr usbhid hid sd_mod crc_t10dif ata_generic ohci_hcd pata_cs5536 ehci_hcd libata usbcore scsi_mod usb_common button 8139too 8139cp mii [last unloaded: scsi_wait_scan]
<4>[ 62.028867]
<4>[ 62.028885] Pid: 2115, comm: anacron Tainted: G D 3.4-trunk-486 #1 First International Computer, Inc. ION603/ION603
<4>[ 62.028921] EIP: 0060:[<c10b698e>] EFLAGS: 00010286 CPU: 0
<4>[ 62.028943] EIP is at __destroy_inode+0x56/0x8d
<4>[ 62.028963] EAX: ffffb4ff EBX: f5799cb8 ECX: f5b77e44 EDX: ffffb4fe
<4>[ 62.028983] ESI: f57976b8 EDI: f5799cb8 EBP: f5797138 ESP: f5b77e5c
<4>[ 62.029004] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
<4>[ 62.029024] CR0: 8005003b CR2: ffffb4ff CR3: 3598f000 CR4: 00000090
<4>[ 62.029045] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
<4>[ 62.029062] DR6: ffff0ff0 DR7: 00000400
<0>[ 62.029081] Process anacron (pid: 2115, ti=f5b76000 task=f38d9030 task.ti=f5b76000)
<0>[ 62.029097] Stack:
<4>[ 62.029108] f5799cb8 c10b6cdd f5797138 c10b5104 f5797138 f5b77e9c f5797728 c10b5149
<4>[ 62.029151] f5797198 f57976b8 00000001 c10b5195 0000072e 00000000 f5797728 f57976b8
<4>[ 62.029192] f5b77e9c f5b77e9c f5b77ed7 00000000 f5812810 f57976b8 c10ddc19 0000084a
<0>[ 62.029234] Call Trace:
<4>[ 62.029260] [<c10b6cdd>] ? destroy_inode+0x1a/0x3e
<4>[ 62.029285] [<c10b5104>] ? dentry_kill+0x7f/0x8c
<4>[ 62.029310] [<c10b5149>] ? shrink_dentry_list+0x38/0x62
<4>[ 62.029336] [<c10b5195>] ? shrink_dcache_parent+0x22/0x15d
<4>[ 62.029368] [<c10ddc19>] ? proc_flush_task+0x89/0x17f
<4>[ 62.029395] [<c1021602>] ? nsecs_to_jiffies+0x5/0x6
<4>[ 62.029423] [<c1038d56>] ? thread_group_times+0x33/0xa7
<4>[ 62.029456] [<c101f146>] ? release_task+0x20/0x2b7
<4>[ 62.029483] [<c101f89d>] ? wait_consider_task+0x4c0/0x7d4
<4>[ 62.029511] [<c101fc64>] ? do_wait+0xb3/0x19a
<4>[ 62.029538] [<c1020a7e>] ? sys_wait4+0x95/0xae
<4>[ 62.029562] [<c101d17e>] ? do_fork+0x162/0x1eb
<4>[ 62.029589] [<c101f0d6>] ? task_stopped_code+0x31/0x31
<4>[ 62.029621] [<c128e6ec>] ? syscall_call+0x7/0xb
<0>[ 62.029637] Code: 85 c0 75 0f ba ee 00 00 00 b8 58 a4 33 c1 e8 87 6e f6 ff 8b 43 1c ff 88 c4 01 00 00 8b 43 10 8d 50 ff 83 fa fd 77 14 85 c0 74 10 <ff> 08 0f 94 c2 84 d2 74 07 31 d2 e8 ee be fa ff 8b 43 14 8d 50
<0>[ 62.029882] EIP: [<c10b698e>] __destroy_inode+0x56/0x8d SS:ESP 0068:f5b77e5c
<4>[ 62.029914] CR2: 00000000ffffb4ff
<4>[ 62.029931] ---[ end trace fd18a118a8987594 ]---
<6>[ 64.809030] colord[2180]: segfault at 8 ip 08052674 sp bfde1990 error 4 in colord[8048000+20000]
Reply to: