Bug#668211: Genius iSlim 1300 V2 webcam not working since 2.6.39
On Wed, 13 Jun 2012 09:39:02 +0200, Jonathan Nieder <jrnieder@gmail.com>
wrote:
What is the newest kernel version you two have tested? Could you
attach full "dmesg" output from booting and reproducing the problem?
I am running 3.2.0-2-686-pae , this is the newest I tried. Attached is a
dmesg output. I booted with the webcam connected, then ran `mplayer
tv://`, then I connected it to a different usb port and tried mplayer
again. It produced a green window each time.
Regards, Peter
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.14-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Fri Apr 6 05:25:56 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000aed87000 (usable)
[ 0.000000] BIOS-e820: 00000000aed87000 - 00000000aeddd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aeddd000 - 00000000aee05000 (reserved)
[ 0.000000] BIOS-e820: 00000000aee05000 - 00000000aee06000 (usable)
[ 0.000000] BIOS-e820: 00000000aee06000 - 00000000aee09000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aee09000 - 00000000aee0a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000aee0a000 - 00000000aee14000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aee14000 - 00000000aee39000 (reserved)
[ 0.000000] BIOS-e820: 00000000aee39000 - 00000000aee7c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aee7c000 - 00000000af000000 (usable)
[ 0.000000] BIOS-e820: 00000000af800000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H67M-GE/HT, BIOS P1.40 02/18/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 23FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000af800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00fcee0] fcee0
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36c16000 - 37603000
[ 0.000000] ACPI: RSDP 000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT aedd5068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP aeddc780 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT aedd5150 0762E (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS aee0bf80 00040
[ 0.000000] ACPI: APIC aeddc878 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT aeddc910 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG aeddcae8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: AAFT aeddcb28 000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET aeddcbe8 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 8324MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0023fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000aed87
[ 0.000000] 0: 0x000aee05 -> 0x000aee06
[ 0.000000] 0: 0x000aee7c -> 0x000af000
[ 0.000000] 0: 0x00100000 -> 0x0023fe00
[ 0.000000] On node 0 totalpages: 2025625
[ 0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f2416200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221482 pages, LIFO batch:31
[ 0.000000] HighMem zone: 16649 pages used for memmap
[ 0.000000] HighMem zone: 1781765 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f2200000 s33024 r0 d24320 u262144
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2007196
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=f85585c4-a651-4e8e-b9c4-b95b652bf936 ro video=LVDS-1:d quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000379fe:0023fe00)
[ 0.000000] Memory: 8012040k/9435136k available (2841k kernel code, 90460k reserved, 1372k data, 412k init, 7193656k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141e000 - 0xc1485000 ( 412 kB)
[ 0.000000] .data : 0xc12c64ac - 0xc141d600 (1372 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c64ac (2841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f1c06000 soft=f1c08000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3391.959 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.91 BogoMIPS (lpj=13567836)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000020] Security Framework initialized
[ 0.000023] AppArmor: AppArmor disabled by boot time parameter
[ 0.000031] Mount-cache hash table entries: 512
[ 0.000095] Initializing cgroup subsys cpuacct
[ 0.000098] Initializing cgroup subsys memory
[ 0.000103] Initializing cgroup subsys devices
[ 0.000104] Initializing cgroup subsys freezer
[ 0.000105] Initializing cgroup subsys net_cls
[ 0.000107] Initializing cgroup subsys blkio
[ 0.000110] Initializing cgroup subsys perf_event
[ 0.000127] CPU: Physical Processor ID: 0
[ 0.000128] CPU: Processor Core ID: 0
[ 0.000131] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000131] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000133] mce: CPU supports 9 MCE banks
[ 0.000142] CPU0: Thermal monitoring enabled (TM1)
[ 0.000147] using mwait in idle threads.
[ 0.000460] ACPI: Core revision 20110623
[ 0.004001] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.004400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.043968] CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07
[ 0.147962] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.147966] PEBS disabled due to CPU errata.
[ 0.147968] ... version: 3
[ 0.147969] ... bit width: 48
[ 0.147969] ... generic registers: 4
[ 0.147970] ... value mask: 0000ffffffffffff
[ 0.147971] ... max period: 000000007fffffff
[ 0.147972] ... fixed-purpose events: 3
[ 0.147973] ... event mask: 000000070000000f
[ 0.148069] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148121] CPU 1 irqstacks, hard=f1d14000 soft=f1d16000
[ 0.148122] Booting Node 0, Processors #1
[ 0.148123] smpboot cpu 1: start_ip = 99000
[ 0.158514] Initializing CPU#1
[ 0.255736] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.255796] CPU 2 irqstacks, hard=f1d44000 soft=f1d46000
[ 0.255797] #2
[ 0.255798] smpboot cpu 2: start_ip = 99000
[ 0.266042] Initializing CPU#2
[ 0.363406] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.363465] CPU 3 irqstacks, hard=f1d56000 soft=f1d58000
[ 0.363466] #3
[ 0.363467] smpboot cpu 3: start_ip = 99000
[ 0.373712] Initializing CPU#3
[ 0.471175] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.471231] CPU 4 irqstacks, hard=f1d66000 soft=f1d68000
[ 0.471233] #4
[ 0.471233] smpboot cpu 4: start_ip = 99000
[ 0.481564] Initializing CPU#4
[ 0.578804] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.578868] CPU 5 irqstacks, hard=f1d98000 soft=f1d9a000
[ 0.578869] #5
[ 0.578870] smpboot cpu 5: start_ip = 99000
[ 0.589115] Initializing CPU#5
[ 0.686479] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.686536] CPU 6 irqstacks, hard=f1daa000 soft=f1dac000
[ 0.686537] #6
[ 0.686538] smpboot cpu 6: start_ip = 99000
[ 0.696782] Initializing CPU#6
[ 0.794245] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.794302] CPU 7 irqstacks, hard=f1dd8000 soft=f1dda000
[ 0.794304] #7 Ok.
[ 0.794304] smpboot cpu 7: start_ip = 99000
[ 0.804550] Initializing CPU#7
[ 0.901913] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.901932] Brought up 8 CPUs
[ 0.901933] Total of 8 processors activated (54275.69 BogoMIPS).
[ 0.908652] devtmpfs: initialized
[ 0.908740] PM: Registering ACPI NVS region at aed87000 (352256 bytes)
[ 0.908748] PM: Registering ACPI NVS region at aee06000 (12288 bytes)
[ 0.908749] PM: Registering ACPI NVS region at aee0a000 (40960 bytes)
[ 0.908751] PM: Registering ACPI NVS region at aee39000 (274432 bytes)
[ 0.908852] print_constraints: dummy:
[ 0.908886] NET: Registered protocol family 16
[ 0.908939] ACPI: bus type pci registered
[ 0.908982] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.908984] PCI: not using MMCONFIG
[ 0.919300] PCI: Using configuration type 1 for base access
[ 0.919658] bio: create slab <bio-0> at 0
[ 0.919711] ACPI: Added _OSI(Module Device)
[ 0.919712] ACPI: Added _OSI(Processor Device)
[ 0.919713] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.919714] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.920376] ACPI: EC: Look up EC in DSDT
[ 0.921137] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.923164] ACPI: SSDT aee13898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.923406] ACPI: Dynamic OEM Table Load:
[ 0.923408] ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.923427] ACPI: SSDT aee0ad98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.923590] ACPI: Dynamic OEM Table Load:
[ 0.923592] ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.924215] ACPI: Interpreter enabled
[ 0.924222] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.924235] ACPI: Using IOAPIC for interrupt routing
[ 0.924249] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.924291] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.924292] PCI: Using MMCONFIG for extended config space
[ 0.924495] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.927739] ACPI: No dock devices found.
[ 0.927741] HEST: Table not found.
[ 0.927744] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.927868] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.928008] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.928010] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.928011] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.928013] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 0.928014] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff]
[ 0.928018] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cd9ff])
[ 0.928025] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[ 0.928052] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
[ 0.928059] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.928064] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.928067] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.928124] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.928154] pci 0000:00:16.0: reg 10: [mem 0xfe608000-0xfe60800f 64bit]
[ 0.928258] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.928262] pci 0000:00:16.0: PME# disabled
[ 0.928304] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.928332] pci 0000:00:1a.0: reg 10: [mem 0xfe607000-0xfe6073ff]
[ 0.928458] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.928462] pci 0000:00:1a.0: PME# disabled
[ 0.928493] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.928514] pci 0000:00:1b.0: reg 10: [mem 0xfe600000-0xfe603fff 64bit]
[ 0.928612] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.928616] pci 0000:00:1b.0: PME# disabled
[ 0.928644] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.928756] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.928760] pci 0000:00:1c.0: PME# disabled
[ 0.928792] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 0.928904] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.928908] pci 0000:00:1c.2: PME# disabled
[ 0.928938] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 0.929050] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.929054] pci 0000:00:1c.3: PME# disabled
[ 0.929084] pci 0000:00:1c.4: [8086:244e] type 1 class 0x000604
[ 0.929196] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.929200] pci 0000:00:1c.4: PME# disabled
[ 0.929230] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 0.929342] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.929346] pci 0000:00:1c.5: PME# disabled
[ 0.929386] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.929413] pci 0000:00:1d.0: reg 10: [mem 0xfe606000-0xfe6063ff]
[ 0.929539] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.929543] pci 0000:00:1d.0: PME# disabled
[ 0.929572] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601
[ 0.929739] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[ 0.929766] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.929777] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.929787] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.929798] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.929809] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.929819] pci 0000:00:1f.2: reg 24: [mem 0xfe605000-0xfe6057ff]
[ 0.929887] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.929891] pci 0000:00:1f.2: PME# disabled
[ 0.929912] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.929933] pci 0000:00:1f.3: reg 10: [mem 0xfe604000-0xfe6040ff 64bit]
[ 0.929962] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.930059] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.930158] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.930190] pci 0000:02:00.0: reg 10: [mem 0xfe500000-0xfe507fff 64bit]
[ 0.930348] pci 0000:02:00.0: supports D1 D2
[ 0.930349] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.930354] pci 0000:02:00.0: PME# disabled
[ 0.937717] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.937727] pci 0000:00:1c.2: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.937837] pci 0000:03:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.937869] pci 0000:03:00.0: reg 10: [mem 0xfe400000-0xfe407fff 64bit]
[ 0.938025] pci 0000:03:00.0: supports D1 D2
[ 0.938026] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.938032] pci 0000:03:00.0: PME# disabled
[ 0.945692] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.945702] pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.945802] pci 0000:04:00.0: [1b21:1080] type 1 class 0x000604
[ 0.945949] pci 0000:00:1c.4: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.945962] pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.945964] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.945966] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.945967] pci 0000:00:1c.4: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 0.946103] pci 0000:04:00.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.946129] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.946131] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.946132] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.946134] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.946135] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.946137] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.946138] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.946140] pci 0000:04:00.0: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 0.946240] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
[ 0.946264] pci 0000:06:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.946306] pci 0000:06:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.946332] pci 0000:06:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.946446] pci 0000:06:00.0: supports D1 D2
[ 0.946447] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.946453] pci 0000:06:00.0: PME# disabled
[ 0.953669] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.953675] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.953689] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.953736] pci_bus 0000:00: on NUMA node 0
[ 0.953738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.953837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.953860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.953883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.953904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.953927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.PE2P._PRT]
[ 0.953949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.954030] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.954168] pci0000:00: ACPI _OSC control (0x1c) granted
[ 0.956744] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.956772] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.956800] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.956827] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.956854] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.956881] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.956908] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.956935] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.956991] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.956996] vgaarb: loaded
[ 0.956996] vgaarb: bridge control possible 0000:00:02.0
[ 0.957016] PCI: Using ACPI for IRQ routing
[ 0.967210] PCI: pci_cache_line_size set to 64 bytes
[ 0.967280] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.967282] reserve RAM buffer: 00000000aed87000 - 00000000afffffff
[ 0.967285] reserve RAM buffer: 00000000aee06000 - 00000000afffffff
[ 0.967287] reserve RAM buffer: 00000000af000000 - 00000000afffffff
[ 0.967289] reserve RAM buffer: 000000023fe00000 - 000000023fffffff
[ 0.967356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.967360] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.969366] Switching to clocksource hpet
[ 0.970340] pnp: PnP ACPI init
[ 0.970348] ACPI: bus type pnp registered
[ 0.970427] pnp 00:00: [bus 00-ff]
[ 0.970429] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.970430] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.970432] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.970433] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.970434] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 0.970436] pnp 00:00: [mem 0xbfa00000-0xffffffff window]
[ 0.970437] pnp 00:00: [mem 0x00000000 window]
[ 0.970462] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.970496] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.970497] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.970498] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.970500] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.970501] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.970524] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.970526] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.970527] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.970529] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.970530] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.970532] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.970566] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.970567] pnp 00:02: [io 0x0290-0x029f]
[ 0.970568] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.970590] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.970592] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.970894] pnp 00:03: [io 0x02f8-0x02ff]
[ 0.970900] pnp 00:03: [irq 3]
[ 0.970901] pnp 00:03: [dma 0 disabled]
[ 0.970935] pnp 00:03: Plug and Play ACPI device, IDs PNP0510 (active)
[ 0.971003] pnp 00:04: [dma 4]
[ 0.971004] pnp 00:04: [io 0x0000-0x000f]
[ 0.971005] pnp 00:04: [io 0x0081-0x0083]
[ 0.971006] pnp 00:04: [io 0x0087]
[ 0.971008] pnp 00:04: [io 0x0089-0x008b]
[ 0.971008] pnp 00:04: [io 0x008f]
[ 0.971009] pnp 00:04: [io 0x00c0-0x00df]
[ 0.971026] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.971031] pnp 00:05: [io 0x0070-0x0071]
[ 0.971035] pnp 00:05: [irq 8]
[ 0.971049] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.971054] pnp 00:06: [io 0x0061]
[ 0.971067] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.971076] pnp 00:07: [io 0x0010-0x001f]
[ 0.971077] pnp 00:07: [io 0x0022-0x003f]
[ 0.971078] pnp 00:07: [io 0x0044-0x005f]
[ 0.971079] pnp 00:07: [io 0x0062-0x0063]
[ 0.971080] pnp 00:07: [io 0x0065-0x006f]
[ 0.971081] pnp 00:07: [io 0x0072-0x007f]
[ 0.971082] pnp 00:07: [io 0x0080]
[ 0.971083] pnp 00:07: [io 0x0084-0x0086]
[ 0.971084] pnp 00:07: [io 0x0088]
[ 0.971085] pnp 00:07: [io 0x008c-0x008e]
[ 0.971086] pnp 00:07: [io 0x0090-0x009f]
[ 0.971087] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.971088] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.971089] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.971113] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.971115] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.971120] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.971123] pnp 00:08: [irq 13]
[ 0.971137] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.971150] pnp 00:09: [io 0x0060]
[ 0.971151] pnp 00:09: [io 0x0064]
[ 0.971154] pnp 00:09: [irq 1]
[ 0.971172] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.971355] pnp 00:0a: [io 0x0400-0x0453]
[ 0.971356] pnp 00:0a: [io 0x0458-0x047f]
[ 0.971357] pnp 00:0a: [io 0x1180-0x119f]
[ 0.971358] pnp 00:0a: [io 0x0500-0x057f]
[ 0.971359] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.971360] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.971361] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.971362] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.971386] system 00:0a: [io 0x0400-0x0453] has been reserved
[ 0.971388] system 00:0a: [io 0x0458-0x047f] has been reserved
[ 0.971389] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.971391] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.971393] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.971394] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.971396] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.971398] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.971399] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.971421] pnp 00:0b: [io 0x0454-0x0457]
[ 0.971444] system 00:0b: [io 0x0454-0x0457] has been reserved
[ 0.971446] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.971509] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.971530] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.971623] pnp: PnP ACPI: found 13 devices
[ 0.971624] ACPI: ACPI bus type pnp unregistered
[ 0.971625] PnPBIOS: Disabled by ACPI PNP
[ 1.007424] PCI: max bus depth: 2 pci_try_num: 3
[ 1.007489] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.007504] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 1.007510] pci 0000:00:1c.2: bridge window [mem 0xfe500000-0xfe5fffff]
[ 1.007520] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 1.007526] pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff]
[ 1.007536] pci 0000:04:00.0: PCI bridge to [bus 05-05]
[ 1.007560] pci 0000:00:1c.4: PCI bridge to [bus 04-05]
[ 1.007574] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 1.007577] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 1.007586] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 1.007601] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.007606] pci 0000:00:1c.0: setting latency timer to 64
[ 1.007614] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.007618] pci 0000:00:1c.2: setting latency timer to 64
[ 1.007626] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.007630] pci 0000:00:1c.3: setting latency timer to 64
[ 1.007636] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.007640] pci 0000:00:1c.4: setting latency timer to 64
[ 1.007649] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.007655] pci 0000:04:00.0: setting latency timer to 64
[ 1.007661] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.007665] pci 0000:00:1c.5: setting latency timer to 64
[ 1.007668] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.007670] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.007671] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.007672] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xffffffff]
[ 1.007674] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 1.007675] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 1.007677] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.007678] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.007679] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.007680] pci_bus 0000:04: resource 7 [mem 0xbfa00000-0xffffffff]
[ 1.007682] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
[ 1.007683] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
[ 1.007684] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
[ 1.007686] pci_bus 0000:05: resource 11 [mem 0xbfa00000-0xffffffff]
[ 1.007687] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 1.007688] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 1.007756] NET: Registered protocol family 2
[ 1.007798] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.007932] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.008077] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.008139] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.008141] TCP reno registered
[ 1.008142] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.008145] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.008211] NET: Registered protocol family 1
[ 1.008217] pci 0000:00:02.0: Boot video device
[ 1.008225] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.008244] pci 0000:00:1a.0: PCI INT A disabled
[ 1.008265] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.008280] pci 0000:00:1d.0: PCI INT A disabled
[ 1.008294] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.008318] pci 0000:02:00.0: PCI INT A disabled
[ 1.008326] pci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.008350] pci 0000:03:00.0: PCI INT A disabled
[ 1.008359] PCI: CLS 64 bytes, default 64
[ 1.008381] Unpacking initramfs...
[ 1.187382] Freeing initrd memory: 10164k freed
[ 1.188733] audit: initializing netlink socket (disabled)
[ 1.188740] type=2000 audit(1339598395.972:1): initialized
[ 1.202745] highmem bounce pool size: 64 pages
[ 1.202749] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.211148] VFS: Disk quotas dquot_6.5.2
[ 1.211174] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.211224] msgmni has been set to 1618
[ 1.211335] alg: No test for stdrng (krng)
[ 1.211360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.211362] io scheduler noop registered
[ 1.211363] io scheduler deadline registered
[ 1.211384] io scheduler cfq registered (default)
[ 1.211450] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.211508] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.211590] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.211644] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 1.211722] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.211775] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 1.211854] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.211908] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 1.212002] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.212007] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.212024] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.212026] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.212030] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.212047] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.212049] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.212053] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.212070] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 1.212071] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 1.212075] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 1.212085] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.212100] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.212101] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.212303] intel_idle: MWAIT substates: 0x1120
[ 1.212304] intel_idle: v0.4 model 0x2A
[ 1.212305] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.212341] ERST: Table is not found!
[ 1.212342] GHES: HEST is not enabled!
[ 1.212349] isapnp: Scanning for PnP cards...
[ 1.567053] isapnp: No Plug & Play device found
[ 1.567094] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.587502] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.587891] Linux agpgart interface v0.103
[ 1.587953] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.588001] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.588963] agpgart-intel 0000:00:00.0: detected 262144K stolen memory
[ 1.589058] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.589159] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.589161] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.589659] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.589729] mousedev: PS/2 mouse device common for all mice
[ 1.589759] rtc_cmos 00:05: RTC can wake from S4
[ 1.589856] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.589887] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.590027] cpuidle: using governor ladder
[ 1.590243] cpuidle: using governor menu
[ 1.590358] TCP cubic registered
[ 1.590494] NET: Registered protocol family 10
[ 1.590882] Mobile IPv6
[ 1.590884] NET: Registered protocol family 17
[ 1.590886] Registering the dns_resolver key type
[ 1.590900] Using IPI No-Shortcut mode
[ 1.591071] PM: Hibernation image not present or could not be loaded.
[ 1.591078] registered taskstats version 1
[ 1.595565] rtc_cmos 00:05: setting system clock to 2012-06-13 14:39:57 UTC (1339598397)
[ 1.595606] Initializing network drop monitor service
[ 1.595734] Freeing unused kernel memory: 412k freed
[ 1.595872] Write protecting the kernel text: 2844k
[ 1.595932] Write protecting the kernel read-only data: 1112k
[ 1.595933] NX-protecting the kernel data: 3300k
[ 1.601602] udevd[76]: starting version 175
[ 1.608812] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.613466] usbcore: registered new interface driver usbfs
[ 1.613483] usbcore: registered new interface driver hub
[ 1.613562] usbcore: registered new device driver usb
[ 1.613939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.613959] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.613976] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.613979] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.613996] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.614020] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.614091] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.614106] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.614132] r8169 0000:06:00.0: setting latency timer to 64
[ 1.614211] r8169 0000:06:00.0: irq 44 for MSI/MSI-X
[ 1.614540] r8169 0000:06:00.0: eth0: RTL8168e/8111e at 0xf822a000, 00:25:22:b4:88:df, XID 0c200000 IRQ 44
[ 1.614542] r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.616577] SCSI subsystem initialized
[ 1.617907] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.617925] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe607000
[ 1.618215] libata version 3.00 loaded.
[ 1.631481] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.631507] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.631510] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.631520] usb usb1: Product: EHCI Host Controller
[ 1.631521] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.631522] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.631648] hub 1-0:1.0: USB hub found
[ 1.631651] hub 1-0:1.0: 2 ports detected
[ 1.631699] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.631712] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.631715] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.631719] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.631741] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.635617] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.635628] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe606000
[ 1.635891] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.635908] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 1.635911] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.635916] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 1.636073] xhci_hcd 0000:02:00.0: irq 18, io mem 0xfe500000
[ 1.636097] xhci_hcd 0000:02:00.0: Failed to enable MSI-X
[ 1.636234] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1.636304] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.636305] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.636306] usb usb3: Product: xHCI Host Controller
[ 1.636307] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae xhci_hcd
[ 1.636309] usb usb3: SerialNumber: 0000:02:00.0
[ 1.636366] xHCI xhci_add_endpoint called for root hub
[ 1.636367] xHCI xhci_check_bandwidth called for root hub
[ 1.636386] hub 3-0:1.0: USB hub found
[ 1.636393] hub 3-0:1.0: 2 ports detected
[ 1.636436] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.636439] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 1.636453] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.636455] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.636456] usb usb4: Product: xHCI Host Controller
[ 1.636457] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae xhci_hcd
[ 1.636458] usb usb4: SerialNumber: 0000:02:00.0
[ 1.636512] xHCI xhci_add_endpoint called for root hub
[ 1.636513] xHCI xhci_check_bandwidth called for root hub
[ 1.636530] hub 4-0:1.0: USB hub found
[ 1.636537] hub 4-0:1.0: 2 ports detected
[ 1.651423] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.651448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.651452] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.651462] usb usb2: Product: EHCI Host Controller
[ 1.651463] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.651464] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.651591] hub 2-0:1.0: USB hub found
[ 1.651595] hub 2-0:1.0: 2 ports detected
[ 1.651639] ahci 0000:00:1f.2: version 3.0
[ 1.651648] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.651691] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 1.651724] ahci: SSS flag set, parallel bus scan disabled
[ 1.659424] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.659454] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 1.659458] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.659463] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
[ 1.659584] xhci_hcd 0000:03:00.0: irq 19, io mem 0xfe400000
[ 1.659606] xhci_hcd 0000:03:00.0: Failed to enable MSI-X
[ 1.659724] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 1.659782] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.659784] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.659785] usb usb5: Product: xHCI Host Controller
[ 1.659786] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae xhci_hcd
[ 1.659787] usb usb5: SerialNumber: 0000:03:00.0
[ 1.659846] xHCI xhci_add_endpoint called for root hub
[ 1.659847] xHCI xhci_check_bandwidth called for root hub
[ 1.659864] hub 5-0:1.0: USB hub found
[ 1.659870] hub 5-0:1.0: 2 ports detected
[ 1.659910] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.659913] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
[ 1.659927] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.659928] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.659929] usb usb6: Product: xHCI Host Controller
[ 1.659930] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae xhci_hcd
[ 1.659931] usb usb6: SerialNumber: 0000:03:00.0
[ 1.659982] xHCI xhci_add_endpoint called for root hub
[ 1.659983] xHCI xhci_check_bandwidth called for root hub
[ 1.659999] hub 6-0:1.0: USB hub found
[ 1.660005] hub 6-0:1.0: 2 ports detected
[ 1.667420] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.667423] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.667428] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.707817] scsi0 : ahci
[ 1.708112] scsi1 : ahci
[ 1.708287] scsi2 : ahci
[ 1.708472] scsi3 : ahci
[ 1.708640] scsi4 : ahci
[ 1.708825] scsi5 : ahci
[ 1.709042] ata1: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605100 irq 46
[ 1.709044] ata2: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605180 irq 46
[ 1.709047] ata3: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605200 irq 46
[ 1.709049] ata4: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605280 irq 46
[ 1.709052] ata5: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605300 irq 46
[ 1.709054] ata6: SATA max UDMA/133 abar m2048@0xfe605000 port 0xfe605380 irq 46
[ 1.942616] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.026379] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.074565] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.074567] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.074895] hub 1-1:1.0: USB hub found
[ 2.075040] hub 1-1:1.0: 6 ports detected
[ 2.181894] Refined TSC clocksource calibration: 3392.294 MHz.
[ 2.181900] Switching to clocksource tsc
[ 2.185885] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 2.238863] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 2.241356] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 2.244099] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 2.244862] usb 3-2: New USB device found, idVendor=0458, idProduct=7071
[ 2.244867] usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.244870] usb 3-2: Product: iSlim 1300 V2
[ 2.244872] usb 3-2: Manufacturer: KYE SYSTEMS CORP.
[ 2.247713] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 2.250207] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 2.353414] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.359894] ata2.00: ATA-7: SAMSUNG HD502HI, 1AG01113, max UDMA7
[ 2.359896] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.361379] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.366487] ata2.00: configured for UDMA/133
[ 2.366574] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1AG0 PQ: 0 ANSI: 5
[ 2.493360] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.493362] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.493696] hub 2-1:1.0: USB hub found
[ 2.493834] hub 2-1:1.0: 8 ports detected
[ 2.684458] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.764350] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.861570] usb 2-1.2: New USB device found, idVendor=09da, idProduct=000a
[ 2.861575] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.861578] usb 2-1.2: Product: PS/2+USB Mouse
[ 2.861580] usb 2-1.2: Manufacturer: A4Tech
[ 2.931868] usb 2-1.3: new low-speed USB device number 4 using ehci_hcd
[ 3.003550] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.004604] ata4.00: ATA-8: ST3500412AS, CC32, max UDMA/133
[ 3.004609] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.005833] ata4.00: configured for UDMA/133
[ 3.005973] scsi 3:0:0:0: Direct-Access ATA ST3500412AS CC32 PQ: 0 ANSI: 5
[ 3.124943] usb 2-1.3: New USB device found, idVendor=051d, idProduct=0002
[ 3.124948] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.124951] usb 2-1.3: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
[ 3.124954] usb 2-1.3: Manufacturer: American Power Conversion
[ 3.124956] usb 2-1.3: SerialNumber: QB0642231236
[ 3.199106] usb 2-1.4: new full-speed USB device number 5 using ehci_hcd
[ 3.294558] usb 2-1.4: New USB device found, idVendor=03f0, idProduct=6204
[ 3.294563] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.294566] usb 2-1.4: Product: deskjet 5100
[ 3.294568] usb 2-1.4: Manufacturer: hp
[ 3.294570] usb 2-1.4: SerialNumber: MY43O4Q1247A
[ 3.322637] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.322998] ata5.00: ATA-8: KINGSTON SS100S216G, D100719, max UDMA/100
[ 3.323003] ata5.00: 31277232 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.323367] ata5.00: configured for UDMA/100
[ 3.323544] scsi 4:0:0:0: Direct-Access ATA KINGSTON SS100S2 D100 PQ: 0 ANSI: 5
[ 3.641721] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.643882] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.643912] sd 1:0:0:0: [sda] Write Protect is off
[ 3.643914] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.643927] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.643965] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.643967] sd 4:0:0:0: [sdc] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 3.644007] sd 4:0:0:0: [sdc] Write Protect is off
[ 3.644010] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.644014] sd 3:0:0:0: [sdb] Write Protect is off
[ 3.644016] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.644024] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.644043] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.644435] sdc: sdc1
[ 3.644578] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 3.646986] sda: sda1
[ 3.647283] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.664297] sdb: sdb1 sdb2 sdb3
[ 3.664773] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 4.641602] generic-usb 0003:051D:0002.0002: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:1d.0-1.3/input0
[ 4.641614] usbcore: registered new interface driver usbhid
[ 4.641615] usbhid: USB HID core driver
[ 5.296271] kjournald starting. Commit interval 5 seconds
[ 5.296297] EXT3-fs (sdc1): mounted filesystem with ordered data mode
[ 5.694452] udevd[319]: starting version 175
[ 5.758140] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.758146] ACPI: Power Button [PWRB]
[ 5.758194] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.758198] ACPI: Power Button [PWRF]
[ 5.769628] iTCO_vendor_support: vendor-support=0
[ 5.773304] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.773356] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 5.773406] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.774408] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.776478] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.783695] [drm] Initialized drm 1.1.0 20060810
[ 5.800674] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.800677] i915 0000:00:02.0: setting latency timer to 64
[ 5.807746] udevd[355]: renamed network interface eth0 to eth1
[ 5.813529] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 5.813532] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 5.813826] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 5.813830] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.813832] [drm] Driver supports precise vblank timestamp query.
[ 5.813865] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.840075] Linux media interface: v0.10
[ 5.840079] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
[ 5.840173] a4tech 0003:09DA:000A.0001: input,hidraw1: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1.2/input0
[ 5.842504] usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6204
[ 5.842514] usbcore: registered new interface driver usblp
[ 5.842878] Linux video capture interface: v2.00
[ 5.848057] uvcvideo: Found UVC 1.00 device iSlim 1300 V2 (0458:7071)
[ 5.854504] input: iSlim 1300 V2 as /devices/pci0000:00/0000:00:1c.2/0000:02:00.0/usb3/3-2/3-2:1.0/input/input5
[ 5.854562] usbcore: registered new interface driver uvcvideo
[ 5.854563] USB Video Class driver (1.1.1)
[ 5.890264] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 5.892874] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 5.918301] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 5.918326] 2:3:1: cannot get freq at ep 0x84
[ 5.918342] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 5.918407] usb 3-2: Not enough bandwidth for altsetting 0
[ 5.918688] usbcore: registered new interface driver snd-usb-audio
[ 6.543061] fbcon: inteldrmfb (fb0) is primary device
[ 6.716104] Console: switching to colour frame buffer device 210x65
[ 6.720050] fb0: inteldrmfb frame buffer device
[ 6.720051] drm: registered panic notifier
[ 6.720058] No ACPI video bus found
[ 6.720099] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.720131] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.720189] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 6.720216] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.272088] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.272270] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 7.272441] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 7.272563] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.272618] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.272661] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.272884] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.495230] Adding 1004024k swap on /dev/sdb1. Priority:-1 extents:1 across:1004024k
[ 7.544429] EXT3-fs (sdc1): using internal journal
[ 7.554487] device-mapper: uevent: version 1.0.3
[ 7.554527] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 7.571899] loop: module loaded
[ 7.575923] w83627ehf: Found NCT6776F chip at 0x290
[ 8.017057] kjournald starting. Commit interval 5 seconds
[ 8.017432] EXT3-fs (sdb3): using internal journal
[ 8.017436] EXT3-fs (sdb3): mounted filesystem with ordered data mode
[ 8.033756] NILFS version 2 loaded
[ 8.322746] segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
[ 8.810694] r8169 0000:06:00.0: eth1: link down
[ 8.810757] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.630882] r8169 0000:06:00.0: eth1: link up
[ 10.630957] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 14.229625] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 14.290118] fuse init (API version 7.17)
[ 14.935621] lp: driver loaded but no devices found
[ 14.937833] ppdev: user-space parallel port driver
[ 15.758583] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.021094] lirc_dev: IR Remote Control driver registered, major 250
[ 16.024016] IR NEC protocol handler initialized
[ 16.025087] usbcore: registered new interface driver mceusb
[ 16.025109] IR RC5(x) protocol handler initialized
[ 16.026461] IR RC6 protocol handler initialized
[ 16.027465] IR JVC protocol handler initialized
[ 16.028469] IR Sony protocol handler initialized
[ 16.029672] IR MCE Keyboard/mouse protocol handler initialized
[ 16.031769] IR LIRC bridge handler initialized
[ 19.835740] postgres (2270): /proc/2270/oom_adj is deprecated, please use /proc/2270/oom_score_adj instead.
[ 21.179539] eth1: no IPv6 routers present
[ 33.583991] vboxdrv: Found 8 processor cores.
[ 33.584189] vboxdrv: fAsync=0 offMin=0x215 offMax=0x182de
[ 33.584218] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 33.584219] vboxdrv: Successfully loaded version 4.1.14 (interface 0x00190000).
[ 33.796069] vboxpci: IOMMU not found (not registered)
[ 77.318981] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 93.343213] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 96.925191] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 96.952736] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 96.952748] 2:3:1: cannot get freq at ep 0x84
[ 96.955069] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 96.955073] usb 3-2: Not enough bandwidth for altsetting 0
[ 96.979784] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 96.979798] 2:3:1: cannot get freq at ep 0x84
[ 96.983045] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 96.983049] usb 3-2: Not enough bandwidth for altsetting 0
[ 98.011228] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 121.117995] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 121.144415] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 121.144455] 2:3:1: cannot get freq at ep 0x84
[ 121.148235] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 121.148239] usb 3-2: Not enough bandwidth for altsetting 0
[ 121.286876] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 121.286889] 2:3:1: cannot get freq at ep 0x84
[ 121.287845] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 121.287849] usb 3-2: Not enough bandwidth for altsetting 0
[ 269.954891] /dev/vmmon[5611]: Module vmmon: registered with major=10 minor=165
[ 269.954896] /dev/vmmon[5611]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 269.954900] /dev/vmmon[5611]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 269.954902] /dev/vmmon[5611]: Module vmmon: initialized
[ 269.975145] [5619]: VMCI: shared components initialized.
[ 269.975169] [5619]: VMCI: host components initialized.
[ 269.975205] [5619]: VMCI: Module registered (name=vmci,major=10,minor=57).
[ 269.975207] [5619]: VMCI: Using host personality
[ 269.975208] [5619]: VMCI: Module (name=vmci) is initialized
[ 270.316156] /dev/vmnet: open called by PID 5699 (vmnet-bridge)
[ 270.316162] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 270.316173] /dev/vmnet: port on hub 0 successfully opened
[ 270.316180] bridge-eth1: up
[ 270.316182] bridge-eth1: attached
[ 271.327816] /dev/vmnet: open called by PID 5706 (vmnet-netifup)
[ 271.327821] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 271.327832] /dev/vmnet: port on hub 1 successfully opened
[ 271.384225] /dev/vmnet: open called by PID 5713 (vmnet-dhcpd)
[ 271.384233] /dev/vmnet: port on hub 1 successfully opened
[ 271.396524] /dev/vmnet: open called by PID 5719 (vmnet-natd)
[ 271.396529] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 271.396540] /dev/vmnet: port on hub 8 successfully opened
[ 271.397363] userif-3: sent link down event.
[ 271.397365] userif-3: sent link up event.
[ 271.398087] /dev/vmnet: open called by PID 5720 (vmnet-netifup)
[ 271.398092] /dev/vmnet: port on hub 8 successfully opened
[ 271.408017] /dev/vmnet: open called by PID 5726 (vmnet-dhcpd)
[ 271.408025] /dev/vmnet: port on hub 8 successfully opened
[ 282.169442] vmnet8: no IPv6 routers present
[ 282.281127] vmnet1: no IPv6 routers present
[ 507.927492] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 507.968668] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 507.968673] usb 3-2: Not enough bandwidth for altsetting 6
[ 563.037281] usb 3-2: USB disconnect, device number 2
[ 568.696967] usb 3-1: new high-speed USB device number 3 using xhci_hcd
[ 568.749451] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 568.751943] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 568.754686] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 568.755315] usb 3-1: New USB device found, idVendor=0458, idProduct=7071
[ 568.755318] usb 3-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 568.755319] usb 3-1: Product: iSlim 1300 V2
[ 568.755321] usb 3-1: Manufacturer: KYE SYSTEMS CORP.
[ 568.758051] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 568.758703] uvcvideo: Found UVC 1.00 device iSlim 1300 V2 (0458:7071)
[ 568.765273] input: iSlim 1300 V2 as /devices/pci0000:00/0000:00:1c.2/0000:02:00.0/usb3/3-1/3-1:1.0/input/input10
[ 568.766900] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 568.769393] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 568.772010] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 568.797187] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 568.797198] 3:3:1: cannot get freq at ep 0x84
[ 568.797231] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 568.797234] usb 3-1: Not enough bandwidth for altsetting 0
[ 569.867712] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 569.867746] 3:3:1: cannot get freq at ep 0x84
[ 569.868060] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 569.868063] usb 3-1: Not enough bandwidth for altsetting 0
[ 569.894135] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 569.894174] 3:3:1: cannot get freq at ep 0x84
[ 569.897550] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 569.897554] usb 3-1: Not enough bandwidth for altsetting 0
[ 584.222907] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 584.287866] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[ 584.287872] usb 3-1: Not enough bandwidth for altsetting 6
Reply to: