--- Begin Message ---
- To: Jonathan Nieder <jrnieder@gmail.com>
- Subject: RE: Dell PERC H710P is not supported by Squeeze Standard Kernel
- From: Buford Peek <BPeek@lancope.com>
- Date: Fri, 8 Jun 2012 18:34:10 +0000
- Message-id: <FB09F9AF3FE25444B277AA82BB35EE176B670424@LCHQEX03.lancope.local>
- In-reply-to: <[🔎] 20120608173508.GA11520@burratino>
- References: <FB09F9AF3FE25444B277AA82BB35EE175F0260C0@LCHQEX03.lancope.local> <20120328192623.GB8982@burratino> <FB09F9AF3FE25444B277AA82BB35EE175F02612C@LCHQEX03.lancope.local> <FB09F9AF3FE25444B277AA82BB35EE175F028482@LCHQEX03.lancope.local> <20120329165806.GC3147@burratino> <FB09F9AF3FE25444B277AA82BB35EE175F0284E2@LCHQEX03.lancope.local> <20120329194751.GG3147@burratino> <FB09F9AF3FE25444B277AA82BB35EE175F029319@LCHQEX03.lancope.local> <20120419223709.GA4904@burratino>,<[🔎] 20120608173508.GA11520@burratino>
Sorry for Not getting back with you on this issue earlier..I have been crazy busy at work.
that being said, here are my findings..
First the patch worked with out issue and was able to spin the drives with no problem. We were being effected by a weird kernel panic (see bug 666442)..I was able to fix that by using a different kernel config. I will explain in more detail in bug 666442.
So I took the latest Debian linux image 2.6.32-45 applied your patch used our NEW kernel config and everything seemed to work great..it went through our initial revs of LTP testing and there were some minor issues mainly on our OS side but other than that, it works great.
We have greatly improved our performance using the new RAID cards, and the driver worked great and without issue
I was a little bummed to see that patch was not applied in 2.6.32-45 but I should have replied earlier..I would recommend to role this patch into 2.6.32-46 or what ever revision 2.6.32 development is on.
-Buford
________________________________________
From: Jonathan Nieder [jrnieder@gmail.com]
Sent: Friday, June 08, 2012 1:35 PM
To: Buford Peek
Cc: 666108@bugs.debian.org
Subject: Re: Dell PERC H710P is not supported by Squeeze Standard Kernel
Hi again,
Jonathan Nieder wrote:
> Buford Peek wrote:
>> So far everything is looking good..We do NOT run a stock config so I
>> have recompiled the kernel with our specific config and will run LTP
>> testing on the system to determine if their are any more issues.
>
> Thanks again. How did it go?
Friendly ping. Did you end up learning anything from testing?
Curious,
Jonathan
--- End Message ---