Bug#675902: linux-image-2.6.32-5-powerpc64: used aptitude to perform kernel upgrade and got these errors, but kernel seems to be installed.
Package: linux-2.6
Version: 2.6.32-41
Severity: important
root@calcium:/var/log# aptitude -u
Preconfiguring packages ...
(Reading database ... 27177 files and directories currently installed.)
Preparing to replace linux-image-2.6.32-5-powerpc64 2.6.32-41 (using .../linux-image-2.6.32-5-powerpc64_2.6.32-45_powerpc.deb) ...
Unpacking replacement linux-image-2.6.32-5-powerpc64 ...
dpkg: error processing /var/cache/apt/archives/linux-image-2.6.32-5-powerpc64_2.6.32-45_powerpc.deb (--unpack):
failed in write on buffer copy for backend dpkg-deb during `./boot/vmlinux-2.6.32-5-powerpc64': No space left on device
configured to not write apport reports
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Examining /etc/kernel/postrm.d .
run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.32-5-powerpc64 /boot/vmlinux-2.6.32-5-powerpc64
Errors were encountered while processing:
/var/cache/apt/archives/linux-image-2.6.32-5-powerpc64_2.6.32-45_powerpc.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install. Trying to recover:
Press return to continue.
***
root@calcium:/boot# uname -a
Linux calcium 2.6.32-5-powerpc64 #1 SMP Mon Jan 16 20:11:51 UTC 2012 ppc64 GNU/Linux
******
-- Package-specific info:
** Version:
Linux version 2.6.32-5-powerpc64 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 20:11:51 UTC 2012
** Command line:
root=UUID=40fb12a6-6b51-4cbd-80dd-9f3716dbd4cf ro
** Not tainted
** Kernel log:
[ 5.069180] scsi 1:0:0:0: Direct-Access ATA ST31000340AS SD01 PQ: 0 ANSI: 5
[ 5.111673] usb 5-2: new full speed USB device using ohci_hcd and address 2
[ 5.330723] usb 5-2: New USB device found, idVendor=05ac, idProduct=1003
[ 5.339658] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.348567] usb 5-2: Product: Hub in Apple Extended USB Keyboard
[ 5.357423] usb 5-2: Manufacturer: Mitsumi Electric
[ 5.366539] usb 5-2: configuration #1 chosen from 1 choice
[ 5.376907] hub 5-2:1.0: USB hub found
[ 5.387729] hub 5-2:1.0: 3 ports detected
[ 5.401773] ata3: SATA link down (SStatus 4 SControl 300)
[ 5.700735] usb 5-2.1: new low speed USB device using ohci_hcd and address 3
[ 5.742824] ata4: SATA link down (SStatus 4 SControl 300)
[ 5.773694] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.774094] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 5.774241] sd 0:0:0:0: [sda] Write Protect is off
[ 5.774245] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.774281] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.774559] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[ 5.819546] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.821315] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.837930] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.837992] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.847718] sdb:
[ 5.861750] usb 5-2.1: New USB device found, idVendor=05ac, idProduct=0307
[ 5.880391] usb 5-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.889848] usb 5-2.1: Product: Apple Optical USB Mouse
[ 5.889912] [mac] sdb1 sdb2 sdb3 sdb4
[ 5.908500] usb 5-2.1: Manufacturer: Logitech
[ 5.909648] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.927338] usb 5-2.1: configuration #1 chosen from 1 choice
[ 6.016804] usb 5-2.3: new full speed USB device using ohci_hcd and address 4
[ 6.139761] usb 5-2.3: New USB device found, idVendor=05ac, idProduct=020b
[ 6.149344] usb 5-2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 6.158929] usb 5-2.3: Product: Apple Extended USB Keyboard
[ 6.168493] usb 5-2.3: Manufacturer: Mitsumi Electric
[ 6.178897] usb 5-2.3: configuration #1 chosen from 1 choice
[ 6.215944] usbcore: registered new interface driver hiddev
[ 6.232258] input: Logitech Apple Optical USB Mouse as /devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.1/5-2.1:1.0/input/input2
[ 6.242801] generic-usb 0003:05AC:0307.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0001:02:0b.1-2.1/input0
[ 6.260334] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.3/5-2.3:1.0/input/input3
[ 6.271056] generic-usb 0003:05AC:020B.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3/input0
[ 6.304027] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.1/usb5/5-2/5-2.3/5-2.3:1.1/input/input4
[ 6.315719] generic-usb 0003:05AC:020B.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3/input1
[ 6.339195] usbcore: registered new interface driver usbhid
[ 6.351221] usbhid: v2.6:USB HID core driver
[ 6.427806] eth0: Link is up at 100 Mbps, full-duplex.
[ 6.632910] PowerMac G5 Thermal control driver 1.3
[ 6.645203] Detected fan controls:
[ 6.657106] 0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
[ 6.669071] 1: RPM fan, id 2, location: DRIVE BAY
[ 6.680984] 2: PWM fan, id 2, location: SLOT,PCI FAN
[ 6.692847] 3: RPM fan, id 3, location: CPU A INTAKE
[ 6.704645] 4: RPM fan, id 4, location: CPU A EXHAUST
[ 6.716445] 5: RPM fan, id 5, location: CPU B INTAKE
[ 6.728098] 6: RPM fan, id 6, location: CPU B EXHAUST
[ 6.790295] PM: Starting manual resume from disk
[ 6.801893] PM: Resume from partition 8:6
[ 6.801895] PM: Checking hibernation image.
[ 6.802286] PM: Error -22 checking image file
[ 6.802289] PM: Resume from disk failed.
[ 6.848518] kjournald starting. Commit interval 5 seconds
[ 6.854794] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.847121] udev[246]: starting version 164
[ 8.053301] PowerMac i2c bus pmu 2 registered
[ 8.069280] PowerMac i2c bus pmu 1 registered
[ 8.082605] PowerMac i2c bus mac-io 0 registered
[ 8.094845] PowerMac i2c bus u3 1 registered
[ 8.108200] PowerMac i2c bus u3 0 registered
[ 8.112437] FCU Initialized, RPM fan shift is 3
[ 8.350505] irq: irq 30 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 30
[ 8.350552] irq: irq 1 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 21
[ 8.350576] irq: irq 2 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 24
[ 8.379689] snd-aoa-fabric-layout: Using PMF GPIOs
[ 8.386382] snd-aoa-codec-tas: found 'deq' node
[ 8.387015] snd-aoa-fabric-layout: can use this codec
[ 8.462274] irq: irq 61 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 61
[ 8.462355] irq: irq 60 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 60
[ 8.462386] snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a
[ 9.337140] Adding 5874012k swap on /dev/sda6. Priority:-1 extents:1 across:5874012k
[ 9.848015] EXT3 FS on sda3, internal journal
[ 9.999641] loop: module loaded
[ 10.035139] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
[ 11.970384] kjournald starting. Commit interval 5 seconds
[ 11.981631] EXT3 FS on sda8, internal journal
[ 11.992275] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.124762] kjournald starting. Commit interval 5 seconds
[ 12.135483] EXT3 FS on sda7, internal journal
[ 12.145319] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.215952] kjournald starting. Commit interval 5 seconds
[ 12.226206] EXT3 FS on sda4, internal journal
[ 12.236054] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.295682] kjournald starting. Commit interval 5 seconds
[ 12.305788] EXT3 FS on sda5, internal journal
[ 12.315433] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.449195] eth0: Link is up at 100 Mbps, full-duplex.
[ 13.450694] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 15.510390] lp: driver loaded but no devices found
[ 24.386653] eth0: no IPv6 routers present
[ 914.849790] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 914.907424] ISO 9660 Extensions: RRIP_1991A
** Model information
revision : 2.2 (pvr 0039 0202)
revision : 2.2 (pvr 0039 0202)
platform : PowerMac
model : PowerMac7,2
machine : PowerMac7,2
motherboard : PowerMac7,2 MacRISC4 Power Macintosh
** Loaded modules:
Module Size Used by
nls_utf8 1904 0
isofs 37384 0
parport_pc 40944 0
lp 12220 0
parport 43200 2 parport_pc,lp
snd_powermac 72328 0
loop 19205 0
firewire_sbp2 18321 0
snd_aoa_codec_tas 14321 2
snd_aoa_fabric_layout 13109 0
snd_aoa 17690 2 snd_aoa_codec_tas,snd_aoa_fabric_layout
snd_aoa_i2sbus 24367 1
snd_aoa_soundbus 5404 2 snd_aoa_fabric_layout,snd_aoa_i2sbus
snd_pcm 96860 2 snd_powermac,snd_aoa_i2sbus
snd_page_alloc 8589 1 snd_pcm
snd_timer 26063 1 snd_pcm
snd 83426 7 snd_powermac,snd_aoa_codec_tas,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_pcm,snd_timer
soundcore 7939 1 snd
evdev 13386 0
i2c_powermac 5654 0
ext3 159647 5
jbd 61099 1 ext3
mbcache 8262 1 ext3
therm_pm72 25896 0
usbhid 49265 0
hid 87022 1 usbhid
sd_mod 41991 7
crc_t10dif 1409 1 sd_mod
ata_generic 4786 0
ohci_hcd 60052 0
ehci_hcd 77012 0
firewire_ohci 38052 0
sata_svw 9431 6
libata 189879 2 ata_generic,sata_svw
ide_cd_mod 33971 0
cdrom 40053 1 ide_cd_mod
firewire_core 57290 2 firewire_sbp2,firewire_ohci
crc_itu_t 1468 1 firewire_core
sungem 56813 0
sungem_phy 14486 1 sungem
scsi_mod 183933 3 firewire_sbp2,sd_mod,libata
ide_pci_generic 3551 0
usbcore 184340 4 usbhid,ohci_hcd,ehci_hcd
nls_base 8213 3 nls_utf8,isofs,usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.20
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
# dns-* options are implemented by the resolvconf package, if installed
#dns-nameservers 208.67.222.222 208.67.220.220
dns-nameservers 192.168.2.3 66.75.164.89 66.75.64.90 8.8.8.8
dns-search gasster.com
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0a:95:d2:9c:38 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.20/24 brd 192.168.1.255 scope global eth0
inet6 fe80::20a:95ff:fed2:9c38/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 255951 1618 0 0 0 0 0 0 74895 519 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1331 total packets received
0 forwarded
0 incoming packets discarded
1331 incoming packets delivered
501 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
3 active connections openings
2 passive connection openings
0 failed connection attempts
0 connection resets received
2 connections established
832 segments received
491 segments send out
0 segments retransmited
0 bad segments received.
3 resets sent
Udp:
108 packets received
0 packets to unknown port received.
0 packet receive errors
10 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
5 delayed acks sent
4 packets directly queued to recvmsg prequeue.
191 packet headers predicted
8 acknowledgments not containing data payload received
454 predicted acknowledgments
IpExt:
InBcastPkts: 489
InOctets: 218913
OutOctets: 66909
InBcastOctets: 131173
** PCI devices:
0000:f0:0b.0 Host bridge [0600]: Apple Computer Inc. U3 AGP [106b:004b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
0000:f0:10.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] [1002:4e48] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] [1002:4e48]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at a0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 90020000 [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeonfb
0001:00:00.0 Host bridge [0600]: Apple Computer Inc. CPC945 HT Bridge [106b:004a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
0001:00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:03.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0045] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: 80000000-800fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:04.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0046] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: 80100000-801fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:05.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0047] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: 80200000-802fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:06.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0048] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Memory behind bridge: 80300000-805fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:07.0 PCI bridge [0604]: Apple Computer Inc. K2 HT-PCI Bridge [106b:0049] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: 80600000-806fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:01:07.0 Unassigned class [ff00]: Apple Computer Inc. K2 KeyLargo Mac/IO [106b:0041] (rev 60)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 64 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:01:08.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:01:09.0 USB Controller [0c03]: Apple Computer Inc. K2 KeyLargo USB [106b:0040] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:02:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:02:0b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at 80101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:02:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 63
Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
0001:03:0d.0 Unassigned class [ff00]: Apple Computer Inc. K2 ATA/100 [106b:0043]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at 80204000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: ide-pmac
0001:03:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. K2 FireWire [106b:0042] (prog-if 10 [OHCI])
Subsystem: Apple Computer Inc. Device [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at 80200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0001:04:0f.0 Ethernet controller [0200]: Apple Computer Inc. K2 GMAC (Sun GEM) [106b:004c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at 80400000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at 80300000 [disabled] [size=1M]
Kernel driver in use: gem
0001:05:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Broadcom K2 SATA [1166:0240]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin ? routed to IRQ 16
Region 0: I/O ports at <unassigned> [disabled]
Region 1: I/O ports at <unassigned> [disabled]
Region 2: I/O ports at <unassigned> [disabled]
Region 3: I/O ports at <unassigned> [disabled]
Region 4: I/O ports at <unassigned> [disabled]
Region 5: Memory at 80600000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: sata_svw
** USB devices:
Bus 005 Device 004: ID 05ac:020b Apple, Inc. Pro Keyboard [Mitsumi, A1048/US layout]
Bus 005 Device 003: ID 05ac:0307 Apple, Inc.
Bus 005 Device 002: ID 05ac:1003 Apple, Inc. Hub in Pro Keyboard [Mitsumi, A1048]
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: powerpc (ppc64)
Kernel: Linux 2.6.32-5-powerpc64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-powerpc64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii libc6 2.11.3-3 Embedded GNU C Library: Shared lib
ii linux-base 2.6.32-45 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-powerpc64 recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-powerpc64 suggests:
pn linux-doc-2.6.32 <none> (no description available)
pn mkvmlinuz <none> (no description available)
Versions of packages linux-image-2.6.32-5-powerpc64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-powerpc64/prerm/removing-running-kernel-2.6.32-5-powerpc64: true
linux-image-2.6.32-5-powerpc64/postinst/missing-firmware-2.6.32-5-powerpc64:
linux-image-2.6.32-5-powerpc64/postinst/ignoring-do-bootloader-2.6.32-5-powerpc64:
linux-image-2.6.32-5-powerpc64/postinst/depmod-error-initrd-2.6.32-5-powerpc64: false
Reply to: