Bug#675302: linux-image-3.2.0-2-amd64: system totally hands when using nouveau
Package: linux-2.6
Version: 3.2.17-1
Severity: important
Dear Maintainer,
* What led up to the situation?
Wanted to change back from the nonfree nvidia driver to nouveau.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Tried removing the nvidia stuff and booting up with nouveau.
* What was the outcome of this action?
Total system hang as soon as xorg starts. No response from keyboard,
mouse, no response on the network (no ping, no ARP response)
* What outcome did you expect instead?
Something better!
Using an Nvidia GeForce GT 520.
I tried a new, clean install of wheezy. After installing lxde (my
favorite), the system freezes as the moment when gdm3 starts up.
I'm pretty certain this is not debian-specific, since I tried booting up
parted magic (v. 2012_05_30) from a USB stick. It does the same exact
thing. However parted magic works when I choose the xvesa boot option.
The nouveau driver is still in use but I guess the fact that only
non-accelerated VESA modes are being used helps.
A while back (like around linux 3.0.0) nouveau and gnome 2.30 did work
on this same machine, at the time I changed to the nvidia drivers for
more minor issues.
I'm filing this against the kernel since this is a total system hang.
The system information below is generated from my working system, using
the nvidia driver.
-- Package-specific info:
** Version:
Linux version 3.2.0-2-amd64 (Debian 3.2.17-1)
(debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) )
#1 SMP Sat May 12 23:08:28 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=/dev/mapper/nws_vg0-rootfs ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 5.724696] PM: Image not found (code -22)
[ 5.724698] PM: Hibernation image not present or could not be loaded.
[ 5.765388] EXT4-fs (dm-0): mounted filesystem with ordered data
mode. Opts: (null)
[ 7.093488] udevd[399]: starting version 175
[ 7.664239] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.664243] ACPI: Power Button [PWRB]
[ 7.664319] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.664321] ACPI: Power Button [PWRF]
[ 7.725543] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.755010] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 7.867662] Marking TSC unstable due to TSC halts in idle
[ 7.867668] ACPI: acpi_idle registered with cpuidle
[ 7.868903] Switching to clocksource hpet
[ 7.878614] iTCO_vendor_support: vendor-support=0
[ 7.950400] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.950492] iTCO_wdt: Found a ICH10R TCO device (Version=2,
TCOBASE=0x0460)
[ 7.950566] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.972393] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 7.972441] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 7.972471] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.009769] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
[ 8.194326] hda_codec: ALC889A: BIOS auto-probing.
[ 8.203338] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 8.203836] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 8.203839] hda_intel: Disabling MSI
[ 8.203876] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 8.467460] Linux media interface: v0.10
[ 8.496188] nvidia: module license 'NVIDIA' taints kernel.
[ 8.496191] Disabling lock debugging due to kernel taint
[ 8.692222] Linux video capture interface: v2.00
[ 8.696074] tpm_tis 00:09: Adjusting TPM timeout parameters.
[ 8.700016] HDMI status: Codec=0 Pin=4 Presence_Detect=0 ELD_Valid=0
[ 8.700526] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
[ 8.714893] input: UVC Camera (046d:0990) as
/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input6
[ 8.714981] usbcore: registered new interface driver uvcvideo
[ 8.714982] USB Video Class driver (1.1.1)
[ 8.732021] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.748101] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 8.748197] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 8.748461] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 8.748471] nvidia 0000:01:00.0: setting latency timer to 64
[ 8.748477] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.748651] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.49
Mon Apr 30 23:46:33 PDT 2012
[ 9.057232] usbcore: registered new interface driver snd-usb-audio
[ 9.468054] parport_pc 00:08: reported by Plug and Play ACPI
[ 9.468107] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.234155] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 10.399608] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 10.545659] loop: module loaded
[ 10.558285] it87: Found IT8718F chip at 0x290, revision 5
[ 10.558292] it87: VID is disabled (pins used for GPIO)
[ 10.558301] it87: Beeping is supported
[ 10.595603] scsi_verify_blk_ioctl: 160 callbacks suppressed
[ 10.595605] mdadm: sending ioctl 800c0910 to a partition!
[ 10.595607] mdadm: sending ioctl 800c0910 to a partition!
[ 10.595609] mdadm: sending ioctl 800c0910 to a partition!
[ 10.595615] mdadm: sending ioctl 1261 to a partition!
[ 10.595616] mdadm: sending ioctl 1261 to a partition!
[ 10.595618] mdadm: sending ioctl 1261 to a partition!
[ 10.595761] mdadm: sending ioctl 1261 to a partition!
[ 10.595764] mdadm: sending ioctl 1261 to a partition!
[ 10.595766] mdadm: sending ioctl 1261 to a partition!
[ 10.595875] mdadm: sending ioctl 1261 to a partition!
[ 11.963225] Adding 4882428k swap on /dev/mapper/vg0-swap.
Priority:-1 extents:1 across:4882428k
[ 12.683257] EXT4-fs (dm-9): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.737594] EXT4-fs (dm-10): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.738809] EXT4-fs (dm-6): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.787800] EXT4-fs (dm-2): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.826857] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.871519] EXT4-fs (dm-3): mounted filesystem with ordered data
mode. Opts: (null)
[ 13.188085] r8169 0000:05:00.0: eth1: link down
[ 13.188092] r8169 0000:05:00.0: eth1: link down
[ 13.188895] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 15.528370] r8169 0000:05:00.0: eth1: link up
[ 15.529193] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 16.732408] fuse init (API version 7.17)
[ 19.880281] lp0: using parport0 (interrupt-driven).
[ 19.904442] ppdev: user-space parallel port driver
[ 22.766747] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=1
ELD_Valid=0
[ 22.772057] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 22.786585] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=0
ELD_Valid=1
[ 22.792016] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 23.467874] vboxdrv: Found 4 processor cores.
[ 23.468173] vboxdrv: fAsync=0 offMin=0x2a0 offMax=0x267b
[ 23.468239] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 23.468241] vboxdrv: Successfully loaded version 4.1.14_Debian
(interface 0x00190000).
[ 23.568021] HDMI: detected monitor SMS27A350H
[ 23.568023] at connection type HDMI
[ 23.568027] HDMI: available speakers: FL/FR LFE FC RL/RR RC FLC/FRC
RLC/RRC FLW/FRW FLH/FRH TC FCH
[ 23.571648] vboxpci: IOMMU not found (not registered)
[ 25.672013] eth1: no IPv6 routers present
[ 40.530670] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=1
ELD_Valid=0
[ 40.536015] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 40.555521] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=1
ELD_Valid=0
[ 40.560015] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 40.586797] HDMI hot plug event: Codec=0 Pin=5 Presence_Detect=0
ELD_Valid=1
[ 40.592019] HDMI status: Codec=0 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 41.372012] HDMI: detected monitor SMS27A350H
[ 41.372014] at connection type HDMI
[ 41.372018] HDMI: available speakers: FL/FR LFE FC RL/RR RC FLC/FRC
RLC/RRC FLW/FRW FLH/FRH TC FCH
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: EP45-UD3P
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F9
board_vendor: Gigabyte Technology Co., Ltd.
board_name: EP45-UD3P
board_version: x.x
** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
acpi_cpufreq
mperf
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
ppdev
lp
binfmt_misc
fuse
ext2
it87
hwmon_vid
coretemp
loop
firewire_sbp2
tpm_infineon
snd_usb_audio
uvcvideo
videodev
nvidia(P)
snd_usbmidi_lib
v4l2_compat_ioctl32
media
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_hda_codec_hdmi
snd_hda_codec_realtek
parport_pc
tpm_tis
snd_hda_intel
parport
snd_hda_codec
tpm
iTCO_wdt
snd_hwdep
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
iTCO_vendor_support
processor
snd
thermal_sys
soundcore
i2c_i801
psmouse
pcspkr
evdev
i2c_core
serio_raw
tpm_bios
button
ext4
crc16
jbd2
mbcache
dm_mod
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
xor
async_tx
raid6_pq
raid1
raid0
multipath
linear
md_mod
sr_mod
sd_mod
cdrom
crc_t10dif
ata_generic
usbhid
hid
ahci
libahci
uhci_hcd
firewire_ohci
firewire_core
crc_itu_t
pata_jmicron
libata
r8169
mii
ehci_hcd
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM
Controller [8086:2e20] (rev 03)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H
Motherboard [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI
Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ec000000-eeffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000e7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H
Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H
Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e200 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1405000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller [8086:3a3e]
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H
Motherboard [1458:a102]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f1400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI
Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f1700000-f18fffff
Prefetchable memory behind bridge: 00000000f1900000-00000000f1afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI
Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f1100000-f11fffff
Prefetchable memory behind bridge: 00000000f1500000-00000000f16fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI
Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: ef000000-efffffff
Prefetchable memory behind bridge: 00000000f1000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI
Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f0000000-f0ffffff
Prefetchable memory behind bridge: 00000000f1200000-00000000f12fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f1404000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: f1300000-f13fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC
Interface Controller [8086:3a16]
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family)
SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H
Motherboard [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 47
Region 0: I/O ports at e600 [size=8]
Region 1: I/O ports at e700 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e900 [size=4]
Region 4: I/O ports at ea00 [size=32]
Region 5: Memory at f1406000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus
Controller [8086:3a30]
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H
Motherboard [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1407000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119
[GeForce GT 520] [10de:1040] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:83a0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at a000 [size=128]
[virtual] Expansion ROM at e2000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GF119 HDMI Audio
Controller [10de:0e08] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:83a0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at f1100000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at b100 [size=4]
Region 2: I/O ports at b200 [size=8]
Region 3: I/O ports at b300 [size=4]
Region 4: I/O ports at b400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H
Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at f1010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f1000000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f1020000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H
Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 46
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f1210000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f1200000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f1220000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
06:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f1304000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f1300000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000
Bus 008 Device 002: ID 046d:c049 Logitech, Inc. G5 Laser Mouse
Bus 008 Device 003: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.43
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.2.0-2-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-2-amd64 suggests:
pn extlinux 2:4.05+dfsg-2
pn grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64:
linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true
linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64:
false
Reply to: