Bug#674565: Bluetooth activation failed (btusb module)
On Tue, May 29, 2012 at 12:49 AM, Arief M Utama
<arief.utama@gmail.com> wrote:
On Sun, May 27, 2012 at 1:35 AM, Jonathan Nieder
<jrnieder@gmail.com> wrote:
Arief M Utama wrote:
> This is the output from lsusb:
>
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
> Bus 001 Device 003: ID 0a5c:21e1 Broadcom Corp.
> Bus 004 Device 003: ID 0424:b832 Standard Microsystems Corp.
> Bus 004 Device 004: ID 064e:e258 Suyin Corp.
>
> More details from lsusb output on the bluetooth device attached.
Thanks.
> I can confirm that patch number 4
> [0004-Bluetooth-btusb-typo-in-Broadcom-SoftSailing-id.patch] is working on
> my laptop. Haven't tested other patches, although I can report that only
> patches 1, 4, 6 and 8 that applied successfully.
Ok. What kernel are you applying these to? Could you attach "dmesg"
output from the patched kernel?
The source package was called this: linux-2.6-3.2.18, the image is this: linux-image-3.2.0-2-amd64.
dmesg output attached here.
Hit enter too quick, forgot about the dmesg attachment. Here it is.
All the best.
-arief
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.18-1a~test) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Sun May 27 21:49:41 WIT 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=bebd9c63-74ba-43e2-a2fc-5e42f29a0a78 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable)
[ 0.000000] BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved)
[ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009cfff000 - 000000009d000000 (usable)
[ 0.000000] BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000025fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ENVY 15 NOTEBOOK PC/1688, BIOS F.04 11/12/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask FC0000000 write-back
[ 0.000000] 7 base 240000000 mask FE0000000 write-back
[ 0.000000] 8 base 25FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000009d000000
[ 0.000000] 0000000000 - 009d000000 page 2M
[ 0.000000] kernel direct mapping tables up to 9d000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000025fe00000
[ 0.000000] 0100000000 - 025fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 25fe00000 @ 9ce34000-9ce3f000
[ 0.000000] RAMDISK: 36bbe000 - 375d7000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000009cfe9000 0FD2A (v01 HP INSYDE 00000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000009cf6c000 00040
[ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000009cfe8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MSDM 000000009cfe7000 00055 (v03 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDAT 000000009cfe6000 00224 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009cfe4000 01066 (v01 HP INSYDE 00001000 MSFT 01000013)
[ 0.000000] ACPI: BOOT 000000009cfe2000 00028 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 000000009cfdf000 00034 (v07 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009cfde000 00990 (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 000000009cfdd000 00996 (v01 HP INSYDE 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 000000009cfd7000 025D2 (v01 HP INSYDE 00001000 INTL 20100121)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000025fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000025fe00000
[ 0.000000] NODE_DATA [000000025fdfb000 - 000000025fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00085fffff] PMD -> [ffff880257400000-ffff88025e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0025fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0009ce3f
[ 0.000000] 0: 0x0009cfff -> 0x0009d000
[ 0.000000] 0: 0x00100000 -> 0x0025fe00
[ 0.000000] On node 0 totalpages: 2083789
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 624248 pages, LIFO batch:31
[ 0.000000] Normal zone: 19705 pages used for memmap
[ 0.000000] Normal zone: 1421575 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000
[ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000
[ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000
[ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s82304 r8192 d24192 u262144
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2049743
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=bebd9c63-74ba-43e2-a2fc-5e42f29a0a78 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8132588k/9959424k available (3403k kernel code, 1624268k absent, 202568k reserved, 3329k data, 568k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2195.151 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.30 BogoMIPS (lpj=8780604)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000046] Security Framework initialized
[ 0.000050] AppArmor: AppArmor disabled by boot time parameter
[ 0.000763] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002621] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003372] Mount-cache hash table entries: 256
[ 0.003484] Initializing cgroup subsys cpuacct
[ 0.003489] Initializing cgroup subsys memory
[ 0.003500] Initializing cgroup subsys devices
[ 0.003503] Initializing cgroup subsys freezer
[ 0.003505] Initializing cgroup subsys net_cls
[ 0.003507] Initializing cgroup subsys blkio
[ 0.003513] Initializing cgroup subsys perf_event
[ 0.003541] CPU: Physical Processor ID: 0
[ 0.003542] CPU: Processor Core ID: 0
[ 0.003548] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003549] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003552] mce: CPU supports 9 MCE banks
[ 0.003563] CPU0: Thermal monitoring handled by SMI
[ 0.003570] using mwait in idle threads.
[ 0.004075] ACPI: Core revision 20110623
[ 0.046410] x2apic not enabled, IRQ remapping init failed
[ 0.046823] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086466] CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.191741] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.191747] PEBS disabled due to CPU errata.
[ 0.191749] ... version: 3
[ 0.191750] ... bit width: 48
[ 0.191751] ... generic registers: 4
[ 0.191753] ... value mask: 0000ffffffffffff
[ 0.191754] ... max period: 000000007fffffff
[ 0.191756] ... fixed-purpose events: 3
[ 0.191757] ... event mask: 000000070000000f
[ 0.191899] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.191999] Booting Node 0, Processors #1
[ 0.192001] smpboot cpu 1: start_ip = 98000
[ 0.279667] CPU1: Thermal monitoring handled by SMI
[ 0.299712] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.299816] #2
[ 0.299818] smpboot cpu 2: start_ip = 98000
[ 0.387541] CPU2: Thermal monitoring handled by SMI
[ 0.407595] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.407692] #3
[ 0.407694] smpboot cpu 3: start_ip = 98000
[ 0.495415] CPU3: Thermal monitoring handled by SMI
[ 0.515472] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.515569] #4
[ 0.515571] smpboot cpu 4: start_ip = 98000
[ 0.603292] CPU4: Thermal monitoring handled by SMI
[ 0.623348] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.623447] #5
[ 0.623448] smpboot cpu 5: start_ip = 98000
[ 0.711167] CPU5: Thermal monitoring handled by SMI
[ 0.731227] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.731325] #6
[ 0.731327] smpboot cpu 6: start_ip = 98000
[ 0.819044] CPU6: Thermal monitoring handled by SMI
[ 0.839103] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.839198] #7 Ok.
[ 0.839199] smpboot cpu 7: start_ip = 98000
[ 0.926918] CPU7: Thermal monitoring handled by SMI
[ 0.946978] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.947004] Brought up 8 CPUs
[ 0.947006] Total of 8 processors activated (35119.15 BogoMIPS).
[ 0.954799] devtmpfs: initialized
[ 0.958231] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes)
[ 0.958426] print_constraints: dummy:
[ 0.958487] NET: Registered protocol family 16
[ 0.958580] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.958582] ACPI: bus type pci registered
[ 0.958663] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.958666] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.981458] PCI: Using configuration type 1 for base access
[ 0.982243] bio: create slab <bio-0> at 0
[ 0.982341] ACPI: Added _OSI(Module Device)
[ 0.982343] ACPI: Added _OSI(Processor Device)
[ 0.982345] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.982347] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.984006] ACPI: EC: Look up EC in DSDT
[ 0.985596] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.014889] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.103641] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 1.104083] ACPI: Dynamic OEM Table Load:
[ 1.104086] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 1.115108] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 1.115598] ACPI: Dynamic OEM Table Load:
[ 1.115601] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 1.130884] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 1.131307] ACPI: Dynamic OEM Table Load:
[ 1.131309] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 2.522214] ACPI: Interpreter enabled
[ 2.522218] ACPI: (supports S0 S3 S4 S5)
[ 2.522250] ACPI: Using IOAPIC for interrupt routing
[ 2.528477] ACPI: Power Resource [FN00] (on)
[ 2.528854] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 2.529316] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 2.529318] HEST: Table not found.
[ 2.529321] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.529762] \_SB_.PCI0:_OSC invalid UUID
[ 2.529763] _OSC request data:1 8 1f
[ 2.529767] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 2.530532] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 2.530535] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 2.530537] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 2.530540] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
[ 2.530551] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 2.530589] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 2.530622] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.530625] pci 0000:00:01.0: PME# disabled
[ 2.530638] pci 0000:00:01.1: [8086:0105] type 1 class 0x000604
[ 2.530669] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 2.530671] pci 0000:00:01.1: PME# disabled
[ 2.530684] pci 0000:00:01.2: [8086:0109] type 1 class 0x000604
[ 2.530715] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 2.530717] pci 0000:00:01.2: PME# disabled
[ 2.530734] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[ 2.530745] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[ 2.530751] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 2.530756] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
[ 2.530812] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 2.530836] pci 0000:00:16.0: reg 10: [mem 0xc3704000-0xc370400f 64bit]
[ 2.530914] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.530919] pci 0000:00:16.0: PME# disabled
[ 2.530953] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 2.531301] pci 0000:00:1a.0: reg 10: [mem 0xc3709000-0xc37093ff]
[ 2.533394] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 2.533398] pci 0000:00:1a.0: PME# disabled
[ 2.533425] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 2.533441] pci 0000:00:1b.0: reg 10: [mem 0xc3700000-0xc3703fff 64bit]
[ 2.533512] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.533516] pci 0000:00:1b.0: PME# disabled
[ 2.533541] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 2.533623] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.533627] pci 0000:00:1c.0: PME# disabled
[ 2.533655] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 2.533736] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 2.533741] pci 0000:00:1c.2: PME# disabled
[ 2.533768] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 2.533850] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.533854] pci 0000:00:1c.4: PME# disabled
[ 2.533883] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[ 2.533964] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 2.533968] pci 0000:00:1c.7: PME# disabled
[ 2.533998] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 2.534346] pci 0000:00:1d.0: reg 10: [mem 0xc3708000-0xc37083ff]
[ 2.536422] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.536427] pci 0000:00:1d.0: PME# disabled
[ 2.536453] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[ 2.536583] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 2.536603] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f]
[ 2.536612] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]
[ 2.536621] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087]
[ 2.536629] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]
[ 2.536637] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
[ 2.536646] pci 0000:00:1f.2: reg 24: [mem 0xc3707000-0xc37077ff]
[ 2.536693] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.536697] pci 0000:00:1f.2: PME# disabled
[ 2.536715] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 2.536732] pci 0000:00:1f.3: reg 10: [mem 0xc3705000-0xc37050ff 64bit]
[ 2.536754] pci 0000:00:1f.3: reg 20: [io 0x5040-0x505f]
[ 2.536816] pci 0000:01:00.0: [1002:6741] type 0 class 0x000300
[ 2.536832] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.536844] pci 0000:01:00.0: reg 18: [mem 0xc2700000-0xc271ffff 64bit]
[ 2.536852] pci 0000:01:00.0: reg 20: [io 0x4000-0x40ff]
[ 2.536867] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 2.536904] pci 0000:01:00.0: supports D1 D2
[ 2.541060] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 2.541067] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 2.541074] pci 0000:00:01.0: bridge window [mem 0xc2700000-0xc36fffff]
[ 2.541084] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.541152] pci 0000:00:01.1: PCI bridge to [bus 07-07]
[ 2.541177] pci 0000:00:01.2: PCI bridge to [bus 08-08]
[ 2.541264] pci 0000:09:00.0: [8086:4238] type 0 class 0x000280
[ 2.541308] pci 0000:09:00.0: reg 10: [mem 0xc2600000-0xc2601fff 64bit]
[ 2.541572] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 2.541580] pci 0000:09:00.0: PME# disabled
[ 2.549065] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
[ 2.549080] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc26fffff]
[ 2.549248] pci 0000:0a:00.0: [10ec:5209] type 0 class 0x00ff00
[ 2.549313] pci 0000:0a:00.0: reg 10: [mem 0xc1600000-0xc1600fff]
[ 2.549809] pci 0000:0a:00.0: supports D1 D2
[ 2.549810] pci 0000:0a:00.0: PME# supported from D1 D2 D3hot
[ 2.549826] pci 0000:0a:00.0: PME# disabled
[ 2.557087] pci 0000:00:1c.2: PCI bridge to [bus 0a-0f]
[ 2.557097] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 2.557111] pci 0000:00:1c.2: bridge window [mem 0xc1600000-0xc25fffff]
[ 2.557134] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 2.557259] pci 0000:10:00.0: [1969:1083] type 0 class 0x000200
[ 2.557352] pci 0000:10:00.0: reg 10: [mem 0xc1500000-0xc153ffff 64bit]
[ 2.557399] pci 0000:10:00.0: reg 18: [io 0x2000-0x207f]
[ 2.557823] pci 0000:10:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.557838] pci 0000:10:00.0: PME# disabled
[ 2.565061] pci 0000:00:1c.4: PCI bridge to [bus 10-10]
[ 2.565071] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 2.565080] pci 0000:00:1c.4: bridge window [mem 0xc1500000-0xc15fffff]
[ 2.565234] pci 0000:11:00.0: [1033:0194] type 0 class 0x000c03
[ 2.565261] pci 0000:11:00.0: reg 10: [mem 0xc1400000-0xc1401fff 64bit]
[ 2.565398] pci 0000:11:00.0: PME# supported from D0 D3hot D3cold
[ 2.565404] pci 0000:11:00.0: PME# disabled
[ 2.573075] pci 0000:00:1c.7: PCI bridge to [bus 11-11]
[ 2.573091] pci 0000:00:1c.7: bridge window [mem 0xc1400000-0xc14fffff]
[ 2.573141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.573402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 2.573459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 2.573510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 2.573568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 2.573625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 2.573678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 2.573720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT]
[ 2.573816] \_SB_.PCI0:_OSC invalid UUID
[ 2.573817] _OSC request data:1 1f 1f
[ 2.573820] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 2.573865] \_SB_.PCI0:_OSC invalid UUID
[ 2.573866] _OSC request data:1 0 1d
[ 2.573869] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 2.573871] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 2.580231] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 2.580294] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 2.580353] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 2.580410] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 2.580467] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 2.580527] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 2.580584] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 2.580641] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.580741] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.580751] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 2.580755] vgaarb: loaded
[ 2.580756] vgaarb: bridge control possible 0000:01:00.0
[ 2.580757] vgaarb: no bridge control possible 0000:00:02.0
[ 2.580795] PCI: Using ACPI for IRQ routing
[ 2.587429] PCI: pci_cache_line_size set to 64 bytes
[ 2.587580] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 2.587582] reserve RAM buffer: 000000009ce3f000 - 000000009fffffff
[ 2.587585] reserve RAM buffer: 000000009d000000 - 000000009fffffff
[ 2.587588] reserve RAM buffer: 000000025fe00000 - 000000025fffffff
[ 2.587694] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.587700] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.589718] Switching to clocksource hpet
[ 2.591557] pnp: PnP ACPI init
[ 2.591569] ACPI: bus type pnp registered
[ 2.591958] pnp 00:00: [bus 00-fe]
[ 2.591961] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 2.591963] pnp 00:00: [io 0x0cf8-0x0cff]
[ 2.591965] pnp 00:00: [io 0x0d00-0xffff window]
[ 2.591967] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 2.591969] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 2.591971] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 2.591972] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 2.591974] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 2.591976] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 2.591978] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 2.591980] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 2.591983] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 2.591985] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 2.591987] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 2.591988] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 2.591990] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 2.591992] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 2.591994] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[ 2.592043] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 2.592068] pnp 00:01: [io 0x0000-0x001f]
[ 2.592070] pnp 00:01: [io 0x0081-0x0091]
[ 2.592071] pnp 00:01: [io 0x0093-0x009f]
[ 2.592073] pnp 00:01: [io 0x00c0-0x00df]
[ 2.592075] pnp 00:01: [dma 4]
[ 2.592099] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.592108] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 2.592131] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.592222] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 2.592247] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.592258] pnp 00:04: [io 0x00f0]
[ 2.592265] pnp 00:04: [irq 13]
[ 2.592288] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.592301] pnp 00:05: [io 0x002e-0x002f]
[ 2.592302] pnp 00:05: [io 0x004e-0x004f]
[ 2.592304] pnp 00:05: [io 0x0061]
[ 2.592305] pnp 00:05: [io 0x0063]
[ 2.592307] pnp 00:05: [io 0x0065]
[ 2.592308] pnp 00:05: [io 0x0067]
[ 2.592310] pnp 00:05: [io 0x0070]
[ 2.592311] pnp 00:05: [io 0x0080]
[ 2.592313] pnp 00:05: [io 0x0092]
[ 2.592314] pnp 00:05: [io 0x00b2-0x00b3]
[ 2.592316] pnp 00:05: [io 0x0680-0x069f]
[ 2.592318] pnp 00:05: [io 0x1004-0x1013]
[ 2.592319] pnp 00:05: [io 0xffff]
[ 2.592321] pnp 00:05: [io 0xffff]
[ 2.592323] pnp 00:05: [io 0x0400-0x0453]
[ 2.592325] pnp 00:05: [io 0x0458-0x047f]
[ 2.592326] pnp 00:05: [io 0x0700-0x077f]
[ 2.592328] pnp 00:05: [io 0x164e-0x164f]
[ 2.592329] pnp 00:05: [io 0x0500-0x0501]
[ 2.592378] system 00:05: [io 0x0680-0x069f] has been reserved
[ 2.592380] system 00:05: [io 0x1004-0x1013] has been reserved
[ 2.592382] system 00:05: [io 0xffff] has been reserved
[ 2.592385] system 00:05: [io 0xffff] has been reserved
[ 2.592387] system 00:05: [io 0x0400-0x0453] has been reserved
[ 2.592389] system 00:05: [io 0x0458-0x047f] has been reserved
[ 2.592391] system 00:05: [io 0x0700-0x077f] has been reserved
[ 2.592394] system 00:05: [io 0x164e-0x164f] has been reserved
[ 2.592396] system 00:05: [io 0x0500-0x0501] has been reserved
[ 2.592398] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.592408] pnp 00:06: [io 0x0070-0x0077]
[ 2.592413] pnp 00:06: [irq 8]
[ 2.592437] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.592460] pnp 00:07: [io 0x0454-0x0457]
[ 2.592501] system 00:07: [io 0x0454-0x0457] has been reserved
[ 2.592503] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 2.592519] pnp 00:08: [io 0x0060]
[ 2.592520] pnp 00:08: [io 0x0064]
[ 2.592525] pnp 00:08: [irq 1]
[ 2.592549] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 2.592561] pnp 00:09: [irq 12]
[ 2.592588] pnp 00:09: Plug and Play ACPI device, IDs SYN1e52 SYN1e00 SYN0002 PNP0f13 (active)
[ 2.592616] pnp 00:0a: [irq 23]
[ 2.592641] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 2.592752] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 2.592754] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 2.592756] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 2.592757] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 2.592759] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 2.592761] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 2.592762] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 2.592764] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 2.592766] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 2.592767] pnp 00:0b: [mem 0x9fa00000-0x9fa00fff]
[ 2.592813] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.592815] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.592818] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.592820] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.592823] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.592825] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.592828] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 2.592830] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.592833] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 2.592835] system 00:0b: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 2.592838] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.593290] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 2.593292] pnp 00:0c: [mem 0x40000000-0x401fffff]
[ 2.593356] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
[ 2.593358] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
[ 2.593361] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.593381] pnp: PnP ACPI: found 13 devices
[ 2.593383] ACPI: ACPI bus type pnp unregistered
[ 2.600048] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 2.600054] PCI: max bus depth: 1 pci_try_num: 2
[ 2.600098] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2720000-0xc273ffff pref]
[ 2.600100] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 2.600102] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 2.600105] pci 0000:00:01.0: bridge window [mem 0xc2700000-0xc36fffff]
[ 2.600108] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.600112] pci 0000:00:01.1: PCI bridge to [bus 07-07]
[ 2.600117] pci 0000:00:01.2: PCI bridge to [bus 08-08]
[ 2.600123] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
[ 2.600128] pci 0000:00:1c.0: bridge window [mem 0xc2600000-0xc26fffff]
[ 2.600137] pci 0000:00:1c.2: PCI bridge to [bus 0a-0f]
[ 2.600141] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 2.600146] pci 0000:00:1c.2: bridge window [mem 0xc1600000-0xc25fffff]
[ 2.600151] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 2.600158] pci 0000:00:1c.4: PCI bridge to [bus 10-10]
[ 2.600161] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 2.600166] pci 0000:00:1c.4: bridge window [mem 0xc1500000-0xc15fffff]
[ 2.600175] pci 0000:00:1c.7: PCI bridge to [bus 11-11]
[ 2.600181] pci 0000:00:1c.7: bridge window [mem 0xc1400000-0xc14fffff]
[ 2.600199] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.600202] pci 0000:00:01.0: setting latency timer to 64
[ 2.600206] pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.600208] pci 0000:00:01.1: setting latency timer to 64
[ 2.600212] pci 0000:00:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.600214] pci 0000:00:01.2: setting latency timer to 64
[ 2.600224] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.600228] pci 0000:00:1c.0: setting latency timer to 64
[ 2.600239] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.600244] pci 0000:00:1c.2: setting latency timer to 64
[ 2.600250] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.600254] pci 0000:00:1c.4: setting latency timer to 64
[ 2.600263] pci 0000:00:1c.7: setting latency timer to 64
[ 2.600267] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.600269] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.600271] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.600273] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 2.600275] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 2.600276] pci_bus 0000:01: resource 1 [mem 0xc2700000-0xc36fffff]
[ 2.600278] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.600281] pci_bus 0000:09: resource 1 [mem 0xc2600000-0xc26fffff]
[ 2.600282] pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
[ 2.600284] pci_bus 0000:0a: resource 1 [mem 0xc1600000-0xc25fffff]
[ 2.600286] pci_bus 0000:0a: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 2.600288] pci_bus 0000:10: resource 0 [io 0x2000-0x2fff]
[ 2.600290] pci_bus 0000:10: resource 1 [mem 0xc1500000-0xc15fffff]
[ 2.600292] pci_bus 0000:11: resource 1 [mem 0xc1400000-0xc14fffff]
[ 2.600382] NET: Registered protocol family 2
[ 2.600627] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.601694] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.603004] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.603129] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.603131] TCP reno registered
[ 2.603149] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.603186] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.603329] NET: Registered protocol family 1
[ 2.603347] pci 0000:00:02.0: Boot video device
[ 2.603361] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.617606] pci 0000:00:1a.0: PCI INT A disabled
[ 2.617672] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.633576] pci 0000:00:1d.0: PCI INT A disabled
[ 2.633701] pci 0000:11:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.645403] pci 0000:11:00.0: PCI INT A disabled
[ 2.645408] PCI: CLS 64 bytes, default 64
[ 2.645454] Unpacking initramfs...
[ 2.866835] Freeing initrd memory: 10340k freed
[ 2.868067] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.868071] Placing 64MB software IO TLB between ffff880098e34000 - ffff88009ce34000
[ 2.868073] software IO TLB at phys 0x98e34000 - 0x9ce34000
[ 2.868095] Simple Boot Flag at 0x44 set to 0x1
[ 2.868835] audit: initializing netlink socket (disabled)
[ 2.868845] type=2000 audit(1338338470.620:1): initialized
[ 2.891492] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.908621] VFS: Disk quotas dquot_6.5.2
[ 2.908658] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.908736] msgmni has been set to 15904
[ 2.908894] alg: No test for stdrng (krng)
[ 2.908929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.908931] io scheduler noop registered
[ 2.908933] io scheduler deadline registered
[ 2.908960] io scheduler cfq registered (default)
[ 2.909052] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.909079] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.909122] pcieport 0000:00:01.1: setting latency timer to 64
[ 2.909142] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[ 2.909179] pcieport 0000:00:01.2: setting latency timer to 64
[ 2.909199] pcieport 0000:00:01.2: irq 42 for MSI/MSI-X
[ 2.909442] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.909468] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.909469] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.909630] acpiphp: Slot [1] registered
[ 2.909883] intel_idle: MWAIT substates: 0x21120
[ 2.909885] intel_idle: v0.4 model 0x2A
[ 2.909886] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.909946] ERST: Table is not found!
[ 2.909947] GHES: HEST is not enabled!
[ 2.910004] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.085581] Linux agpgart interface v0.103
[ 3.085665] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 3.085737] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 3.086882] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 3.087011] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 3.087151] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.088614] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.088620] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.088729] mousedev: PS/2 mouse device common for all mice
[ 3.088766] rtc_cmos 00:06: RTC can wake from S4
[ 3.088932] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.088971] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.089278] cpuidle: using governor ladder
[ 3.089718] cpuidle: using governor menu
[ 3.089899] TCP cubic registered
[ 3.090119] NET: Registered protocol family 10
[ 3.090693] Mobile IPv6
[ 3.090695] NET: Registered protocol family 17
[ 3.090699] Registering the dns_resolver key type
[ 3.091125] PM: Hibernation image not present or could not be loaded.
[ 3.091138] registered taskstats version 1
[ 3.100107] rtc_cmos 00:06: setting system clock to 2012-05-30 00:41:12 UTC (1338338472)
[ 3.100168] Initializing network drop monitor service
[ 3.101238] Freeing unused kernel memory: 568k freed
[ 3.101308] Write protecting the kernel read-only data: 6144k
[ 3.103779] Freeing unused kernel memory: 676k freed
[ 3.106224] Freeing unused kernel memory: 676k freed
[ 3.119555] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.120582] udevd[78]: starting version 175
[ 3.141928] atl1c 0000:10:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.141952] atl1c 0000:10:00.0: setting latency timer to 64
[ 3.143203] usbcore: registered new interface driver usbfs
[ 3.143234] usbcore: registered new interface driver hub
[ 3.143399] usbcore: registered new device driver usb
[ 3.144305] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.144309] ACPI: Thermal Zone [TZ00] (65 C)
[ 3.144683] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.144686] ACPI: Thermal Zone [TZ01] (61 C)
[ 3.144766] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.144793] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.144819] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.144824] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.144860] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.144897] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.145071] SCSI subsystem initialized
[ 3.146974] libata version 3.00 loaded.
[ 3.148787] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.148811] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc3709000
[ 3.161061] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.161112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.161115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.161117] usb usb1: Product: EHCI Host Controller
[ 3.161118] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 3.161120] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.161269] hub 1-0:1.0: USB hub found
[ 3.161275] hub 1-0:1.0: 2 ports detected
[ 3.161372] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.161404] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.161407] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.161415] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.161442] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.165335] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.165354] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc3708000
[ 3.181057] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.181111] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.181114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.181116] usb usb2: Product: EHCI Host Controller
[ 3.181118] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 3.181120] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.181278] hub 2-0:1.0: USB hub found
[ 3.181287] hub 2-0:1.0: 2 ports detected
[ 3.181434] ahci 0000:00:1f.2: version 3.0
[ 3.181447] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.181474] ACPI: Fan [FAN0] (on)
[ 3.181512] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 3.181896] xhci_hcd 0000:11:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.181916] xhci_hcd 0000:11:00.0: setting latency timer to 64
[ 3.181921] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 3.181933] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 3
[ 3.182109] xhci_hcd 0000:11:00.0: irq 19, io mem 0xc1400000
[ 3.182175] xhci_hcd 0000:11:00.0: irq 44 for MSI/MSI-X
[ 3.182180] xhci_hcd 0000:11:00.0: irq 45 for MSI/MSI-X
[ 3.182184] xhci_hcd 0000:11:00.0: irq 46 for MSI/MSI-X
[ 3.182188] xhci_hcd 0000:11:00.0: irq 47 for MSI/MSI-X
[ 3.182193] xhci_hcd 0000:11:00.0: irq 48 for MSI/MSI-X
[ 3.182197] xhci_hcd 0000:11:00.0: irq 49 for MSI/MSI-X
[ 3.182202] xhci_hcd 0000:11:00.0: irq 50 for MSI/MSI-X
[ 3.182206] xhci_hcd 0000:11:00.0: irq 51 for MSI/MSI-X
[ 3.182339] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.182342] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.182343] usb usb3: Product: xHCI Host Controller
[ 3.182345] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 xhci_hcd
[ 3.182346] usb usb3: SerialNumber: 0000:11:00.0
[ 3.182490] xHCI xhci_add_endpoint called for root hub
[ 3.182493] xHCI xhci_check_bandwidth called for root hub
[ 3.182524] hub 3-0:1.0: USB hub found
[ 3.182531] hub 3-0:1.0: 2 ports detected
[ 3.182589] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 3.182595] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 4
[ 3.185535] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.185538] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.185539] usb usb4: Product: xHCI Host Controller
[ 3.185541] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 xhci_hcd
[ 3.185543] usb usb4: SerialNumber: 0000:11:00.0
[ 3.185694] xHCI xhci_add_endpoint called for root hub
[ 3.185697] xHCI xhci_check_bandwidth called for root hub
[ 3.185726] hub 4-0:1.0: USB hub found
[ 3.185734] hub 4-0:1.0: 2 ports detected
[ 3.197085] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 3.197090] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 3.197097] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.205682] scsi0 : ahci
[ 3.205926] scsi1 : ahci
[ 3.206102] scsi2 : ahci
[ 3.206262] scsi3 : ahci
[ 3.206424] scsi4 : ahci
[ 3.206573] scsi5 : ahci
[ 3.206697] ata1: SATA max UDMA/133 abar m2048@0xc3707000 port 0xc3707100 irq 43
[ 3.206699] ata2: DUMMY
[ 3.206702] ata3: SATA max UDMA/133 abar m2048@0xc3707000 port 0xc3707200 irq 43
[ 3.206704] ata4: DUMMY
[ 3.206705] ata5: DUMMY
[ 3.206706] ata6: DUMMY
[ 3.270023] atl1c 0000:10:00.0: version 1.0.1.0-NAPI
[ 3.472738] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.524690] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.524715] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.529132] ata3.00: ATAPI: hp DVDRAM GS30N, VC03, max UDMA/100
[ 3.531061] ata1.00: ATA-9: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
[ 3.531071] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.534332] ata3.00: configured for UDMA/100
[ 3.537510] ata1.00: configured for UDMA/133
[ 3.537751] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5
[ 3.541184] scsi 2:0:0:0: CD-ROM hp DVDRAM GS30N VC03 PQ: 0 ANSI: 5
[ 3.545497] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.545501] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.545535] sd 0:0:0:0: [sda] Write Protect is off
[ 3.545538] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.545553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.550493] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
[ 3.550503] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.550712] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.605152] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.605155] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.605547] hub 1-1:1.0: USB hub found
[ 3.605628] hub 1-1:1.0: 6 ports detected
[ 3.605772] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 3.606532] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.716425] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.848593] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.848603] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.848866] hub 2-1:1.0: USB hub found
[ 3.848946] hub 2-1:1.0: 6 ports detected
[ 3.864292] Refined TSC clocksource calibration: 2195.013 MHz.
[ 3.864304] Switching to clocksource tsc
[ 3.920453] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[ 4.016084] usb 1-1.3: New USB device found, idVendor=0a5c, idProduct=21e1
[ 4.016095] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.016100] usb 1-1.3: Product: BCM20702A0
[ 4.016104] usb 1-1.3: Manufacturer: Broadcom Corp
[ 4.016109] usb 1-1.3: SerialNumber: E4D53DCFA928
[ 4.120236] usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
[ 4.220648] usb 2-1.5: New USB device found, idVendor=0424, idProduct=b832
[ 4.220658] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.220664] usb 2-1.5: Product: HP Wireless Audio Adapter
[ 4.220669] usb 2-1.5: Manufacturer: Standard Microsystems Corp.
[ 4.257997] input: Standard Microsystems Corp. HP Wireless Audio Adapter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.3/input/input1
[ 4.258217] generic-usb 0003:0424:B832.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [Standard Microsystems Corp. HP Wireless Audio Adapter] on usb-0000:00:1d.0-1.5/input3
[ 4.258237] usbcore: registered new interface driver usbhid
[ 4.258239] usbhid: USB HID core driver
[ 4.296040] usb 2-1.6: new high-speed USB device number 4 using ehci_hcd
[ 4.427689] usb 2-1.6: New USB device found, idVendor=064e, idProduct=e258
[ 4.427693] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.427696] usb 2-1.6: Product: HP TrueVision HD
[ 4.427697] usb 2-1.6: Manufacturer: SuYin
[ 4.427698]
[ 4.427699] usb 2-1.6: SerialNumber: HF1016-A821-OV01-VH-R01.01.00
[ 4.828937] PM: Starting manual resume from disk
[ 4.828940] PM: Hibernation image partition 8:6 present
[ 4.828942] PM: Looking for hibernation image.
[ 4.829158] PM: Image not found (code -22)
[ 4.829161] PM: Hibernation image not present or could not be loaded.
[ 4.837095] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 4.837098] EXT4-fs (sda5): write access will be enabled during recovery
[ 5.337611] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 5.337618] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4328294
[ 5.337667] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4328229
[ 5.337704] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4325552
[ 5.337716] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4326232
[ 5.337727] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4325482
[ 5.337739] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4325478
[ 5.337749] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4330136
[ 5.337760] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4325623
[ 5.337788] EXT4-fs (sda5): 8 orphan inodes deleted
[ 5.337790] EXT4-fs (sda5): recovery complete
[ 6.350752] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 8.870046] udevd[338]: starting version 175
[ 9.612322] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 9.612507] ACPI: Lid Switch [LID0]
[ 9.612563] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 9.612567] ACPI: Power Button [PWRB]
[ 9.612617] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.612620] ACPI: Power Button [PWRF]
[ 9.638108] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.958755] hp_accel: laptop model unknown, using default axes configuration
[ 9.966582] lis3lv02d: 8 bits 3DC sensor found
[ 9.987168] iTCO_vendor_support: vendor-support=0
[ 10.093485] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 10.093657] Registered led device: hp::hddprotect
[ 10.093677] hp_accel: driver loaded
[ 10.250808] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.251583] Initializing Realtek PCIE storage driver...
[ 10.251612] rts_pstor 0000:0a:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.251666] Resource length: 0x1000
[ 10.251686] Original address: 0xc1600000, remapped address: 0xffffc90000c7c000
[ 10.251689] pci->irq = 18
[ 10.251691] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 10.251717] rts_pstor 0000:0a:00.0: setting latency timer to 64
[ 10.305666] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 10.305672] ACPI: resource 0000:00:1f.3 [io 0x5040-0x505f] conflicts with ACPI region SMBI [io 0x5040-0x504f]
[ 10.305675] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.372273] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x122c00
[ 10.402733] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 10.453270] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
[ 10.453487] rts_pstor: waiting for device to settle before scanning
[ 10.458058] ACPI: AC Adapter [AC] (on-line)
[ 10.458386] wmi: Mapper loaded
[ 10.465373] ACPI: Battery Slot [BAT0] (battery present)
[ 10.500728] Bluetooth: Core ver 2.16
[ 10.500744] NET: Registered protocol family 31
[ 10.500746] Bluetooth: HCI device and connection manager initialized
[ 10.500748] Bluetooth: HCI socket layer initialized
[ 10.500750] Bluetooth: L2CAP socket layer initialized
[ 10.500754] Bluetooth: SCO socket layer initialized
[ 10.516857] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.517097] usbcore: registered new interface driver btusb
[ 10.560626] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 10.560715] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 10.560791] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.649314] Linux media interface: v0.10
[ 10.727167] [drm] Initialized drm 1.1.0 20060810
[ 10.764371] cfg80211: Calling CRDA to update world regulatory domain
[ 10.782651] Linux video capture interface: v2.00
[ 10.855675] i915 0000:00:02.0: power state changed by ACPI to D0
[ 10.855680] i915 0000:00:02.0: power state changed by ACPI to D0
[ 10.855686] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.855690] i915 0000:00:02.0: setting latency timer to 64
[ 10.891247] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[ 10.891252] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 10.891254] [drm] Driver supports precise vblank timestamp query.
[ 10.892798] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 10.892801] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 10.911405] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:e258)
[ 10.914646] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input8
[ 10.914717] usbcore: registered new interface driver uvcvideo
[ 10.914719] USB Video Class driver (1.1.1)
[ 10.940932] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 10.940935] Copyright(c) 2003-2011 Intel Corporation
[ 10.940982] iwlwifi 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.940993] iwlwifi 0000:09:00.0: setting latency timer to 64
[ 10.941014] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[ 10.941016] iwlwifi 0000:09:00.0: pci_resource_base = ffffc900117c4000
[ 10.941019] iwlwifi 0000:09:00.0: HW Revision ID = 0x3E
[ 10.941103] iwlwifi 0000:09:00.0: irq 53 for MSI/MSI-X
[ 10.941136] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 10.941202] iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S
[ 10.957371] iwlwifi 0000:09:00.0: device EEPROM VER=0x43a, CALIB=0x6
[ 10.957373] iwlwifi 0000:09:00.0: Device SKU: 0X1f0
[ 10.957376] iwlwifi 0000:09:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 10.957405] iwlwifi 0000:09:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 10.980390] [drm] failed to retrieve link info, disabling eDP
[ 11.084702] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 11.208007] Error: Driver 'pcspkr' is already registered, aborting...
[ 11.399257] [drm] radeon kernel modesetting enabled.
[ 11.399271] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 11.399331] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 11.399339] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.399347] radeon 0000:01:00.0: setting latency timer to 64
[ 11.452078] rts_pstor: device scan complete
[ 11.452316] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 11.452417] Bad LUN (0:1)
[ 11.452607] Bad target number (1:0)
[ 11.452746] Bad target number (2:0)
[ 11.452878] Bad target number (3:0)
[ 11.452998] Bad target number (4:0)
[ 11.453141] Bad target number (5:0)
[ 11.453257] Bad target number (6:0)
[ 11.453353] Bad target number (7:0)
[ 11.453724] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 11.584918] iwlwifi 0000:09:00.0: loaded firmware version 9.221.4.1 build 25532
[ 11.585199] Registered led device: phy0-led
[ 11.636416] fbcon: inteldrmfb (fb0) is primary device
[ 11.685450] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.871618] Console: switching to colour frame buffer device 170x48
[ 11.875708] fb0: inteldrmfb frame buffer device
[ 11.875710] drm: registered panic notifier
[ 11.875900] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 11.879618] acpi device:31: registered as cooling_device9
[ 11.879826] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input10
[ 11.879878] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 11.883011] acpi device:3e: registered as cooling_device10
[ 11.883215] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[ 11.883263] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.883310] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.883358] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.883429] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
[ 11.883462] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 11.883548] [drm] initializing kernel modesetting (TURKS 0x1002:0x6741 0x103C:0x1688).
[ 11.883578] [drm] register mmio base: 0xC2700000
[ 11.883580] [drm] register mmio size: 131072
[ 11.883581] vga_switcheroo: enabled
[ 11.883695] radeon atpx: version is 1
[ 12.430619] cfg80211: World regulatory domain updated:
[ 12.430622] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.430625] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.430627] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.430630] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.430632] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.430634] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.544963] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 12.606942] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 12.607127] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 12.607272] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.607358] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 12.607499] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.607585] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 13.224221] ATOM BIOS: HP
[ 13.224264] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 13.224266] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 13.224274] mtrr: no more MTRRs available
[ 13.224276] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 13.224277] [drm] RAM width 128bits DDR
[ 13.224342] [TTM] Zone kernel: Available graphics memory: 4072424 kiB.
[ 13.224344] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 13.224345] [TTM] Initializing pool allocator.
[ 13.224367] [drm] radeon: 1024M of VRAM memory ready
[ 13.224369] [drm] radeon: 512M of GTT memory ready.
[ 13.224381] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.224382] [drm] Driver supports precise vblank timestamp query.
[ 13.224430] radeon 0000:01:00.0: irq 55 for MSI/MSI-X
[ 13.224436] radeon 0000:01:00.0: radeon: using MSI.
[ 13.224502] [drm] radeon: irq initialized.
[ 13.224505] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.224912] [drm] Loading TURKS Microcode
[ 13.303907] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 13.304036] radeon 0000:01:00.0: WB enabled
[ 13.320362] [drm] ring test succeeded in 2 usecs
[ 13.320466] [drm] radeon: ib pool ready.
[ 13.320579] [drm] ib test succeeded in 0 usecs
[ 13.320750] [drm] Radeon Display Connectors
[ 13.320767] [drm] Internal thermal controller without fan control
[ 13.321970] [drm] radeon: power management initialized
[ 13.322240] No connectors reported connected with modes
[ 13.322242] [drm] Cannot find any crtc or sizes - going 1024x768
[ 13.324724] [drm] fb mappable at 0xA0142000
[ 13.324725] [drm] vram apper at 0xA0000000
[ 13.324726] [drm] size 3145728
[ 13.324728] [drm] fb depth is 24
[ 13.324729] [drm] pitch is 4096
[ 13.324809] fb1: radeondrmfb frame buffer device
[ 13.324813] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 1
[ 15.192933] Adding 8584188k swap on /dev/sda6. Priority:-1 extents:1 across:8584188k
[ 15.205371] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 15.357028] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 15.450021] loop: module loaded
[ 16.631141] RPC: Registered named UNIX socket transport module.
[ 16.631145] RPC: Registered udp transport module.
[ 16.631146] RPC: Registered tcp transport module.
[ 16.631148] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.686209] FS-Cache: Loaded
[ 16.739741] FS-Cache: Netfs 'nfs' registered for caching
[ 16.750347] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.578043] iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S
[ 19.584492] iwlwifi 0000:09:00.0: Radio type=0x0-0x3-0x1
[ 19.826473] iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S
[ 19.832934] iwlwifi 0000:09:00.0: Radio type=0x0-0x3-0x1
[ 19.958790] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.970469] atl1c 0000:10:00.0: irq 56 for MSI/MSI-X
[ 20.056559] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.295488] Bluetooth: RFCOMM TTY layer initialized
[ 25.295494] Bluetooth: RFCOMM socket layer initialized
[ 25.295496] Bluetooth: RFCOMM ver 1.11
[ 25.698893] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.698896] Bluetooth: BNEP filters: protocol multicast
[ 26.584185] lp: driver loaded but no devices found
[ 26.601311] ppdev: user-space parallel port driver
[ 26.770403] wlan0: authenticate with 00:22:6b:6f:ad:10 (try 1)
[ 26.773384] wlan0: authenticated
[ 26.773620] wlan0: associate with 00:22:6b:6f:ad:10 (try 1)
[ 26.775890] wlan0: RX AssocResp from 00:22:6b:6f:ad:10 (capab=0x401 status=0 aid=2)
[ 26.775896] wlan0: associated
[ 26.780217] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 37.547206] wlan0: no IPv6 routers present
[ 46.154749] postgres (3007): /proc/3007/oom_adj is deprecated, please use /proc/3007/oom_score_adj instead.
[ 77.448484] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 77.448494] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 77.459992] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 77.460002] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 77.618363] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 77.618373] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 77.629916] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 77.629925] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 77.783956] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 77.783963] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 77.795444] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 77.795465] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 77.937731] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 77.937740] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 77.949258] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 77.949265] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 78.084772] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 78.084781] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 78.096284] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 78.096291] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 78.232712] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 78.232722] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 78.244220] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 78.244229] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 78.375313] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 78.375325] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 78.396776] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 78.396783] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 78.518200] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
[ 78.518227] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 78.529696] atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
[ 78.529705] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[ 83.542526] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 141.914013] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 141.915358] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 141.928545] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
Reply to: