Bug#674430: wireless brcms_c_wait_for_tx_completion warning
Package: linux-2.6
Severity: normal
Here is log from 3.2.18-1 kernel with X125 laptop. WARNING is there.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.18-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Mon May 21 18:24:12 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006fe70000 (usable)
[ 0.000000] BIOS-e820: 000000006fe70000 - 000000006fe90000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006fe90000 - 000000006fe93000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fe93000 - 000000006feff000 (reserved)
[ 0.000000] BIOS-e820: 000000006ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. X125 /X125 , BIOS 02UP 08/20/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x6fe70 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DEFFF uncachable
[ 0.000000] DF000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back
[ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f7c00] f7c00
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 376a3000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36d56000 - 376a29db
[ 0.000000] Move RAMDISK from 00000000376a3000 - 0000000037fef9da to 36d56000 - 376a29da
[ 0.000000] ACPI: RSDP 000f7bd0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 6fe7fa68 00084 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 6fe8f260 000F4 (v03 SEC MAGIC 06040000 AMD 000F4240)
[ 0.000000] ACPI: DSDT 6fe7faec 0F774 (v01 ATI SB800 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 6fe92fc0 00040
[ 0.000000] ACPI: TCPA 6fe8f3c8 00032 (v02 AMD 06040000 PTEC 00000000)
[ 0.000000] ACPI: EINJ 6fe8f3fa 001B0 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: HEST 6fe8f5aa 002E4 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: BERT 6fe8f88e 00030 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 6fe8f8be 000E1 (v01 wheaos wheaosc 06040000 INTL 20050624)
[ 0.000000] ACPI: ERST 6fe8f99f 00270 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 6fe8fc0f 001B7 (v01 AMD POWERNOW 06040000 AMD 00000001)
[ 0.000000] ACPI: SLIC 6fe8fdc6 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: APIC 6fe8ff3c 00050 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 6fe8ff8c 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 6fe8ffc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 900MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0006fe70
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0006fe70
[ 0.000000] On node 0 totalpages: 458237
[ 0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f5f56200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1801 pages used for memmap
[ 0.000000] HighMem zone: 228713 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override: forcing polarity to high active.
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x69, should be 0x6C (20110623/tbutils-314)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79e6000 s33024 r0 d24320 u57344
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454656
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=UUID=8d1825b0-128e-48b9-b21d-c189ccdf9506 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0006fe70)
[ 0.000000] Memory: 1802952k/1833408k available (2841k kernel code, 29996k reserved, 1371k data, 412k init, 922056k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141e000 - 0xc1485000 ( 412 kB)
[ 0.000000] .data : 0xc12c672c - 0xc141d600 (1371 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c672c (2841 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1695.902 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3391.80 BogoMIPS (lpj=6783608)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004052] Security Framework initialized
[ 0.004058] AppArmor: AppArmor disabled by boot time parameter
[ 0.004076] Mount-cache hash table entries: 512
[ 0.004214] Initializing cgroup subsys cpuacct
[ 0.004221] Initializing cgroup subsys memory
[ 0.004232] Initializing cgroup subsys devices
[ 0.004235] Initializing cgroup subsys freezer
[ 0.004238] Initializing cgroup subsys net_cls
[ 0.004241] Initializing cgroup subsys blkio
[ 0.004249] Initializing cgroup subsys perf_event
[ 0.004282] mce: CPU supports 6 MCE banks
[ 0.004294] using AMD E400 aware idle routine
[ 0.004367] SMP alternatives: switching to UP code
[ 0.010286] Freeing SMP alternatives: 8k freed
[ 0.010293] ACPI: Core revision 20110623
[ 0.016061] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057856] CPU0: AMD Athlon(tm) II Neo K125 Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Brought up 1 CPUs
[ 0.060003] Total of 1 processors activated (3391.80 BogoMIPS).
[ 0.060003] devtmpfs: initialized
[ 0.060003] PM: Registering ACPI NVS region at 6fe90000 (12288 bytes)
[ 0.060003] print_constraints: dummy:
[ 0.060003] NET: Registered protocol family 16
[ 0.060003] node 0 link 0: io port [1000, ffff]
[ 0.060003] TOM: 0000000080000000 aka 2048M
[ 0.060003] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.060003] node 0 link 0: mmio [a0000, bffff]
[ 0.060003] node 0 link 0: mmio [80000000, bfffffff]
[ 0.060003] node 0 link 0: mmio [c0000000, d01fffff]
[ 0.060003] node 0 link 0: mmio [d0200000, dfffffff]
[ 0.060003] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.060003] node 0 link 0: mmio [f0000000, ffdfffff]
[ 0.060003] bus: [00, 1f] on node 0 link 0
[ 0.060003] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.060003] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.060003] bus: 00 index 2 [mem 0x80000000-0xdfffffff]
[ 0.060003] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
[ 0.060003] Extended Config Space enabled on 1 nodes
[ 0.060003] ACPI: bus type pci registered
[ 0.060003] PCI: MMCONFIG for domain 0000 [bus 00-03] at [mem 0xe0000000-0xe03fffff] (base 0xe0000000)
[ 0.060003] PCI: not using MMCONFIG
[ 0.060003] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.060003] PCI: PCI BIOS revision 2.10 entry at 0xfda40, last bus=4
[ 0.060003] PCI: Using configuration type 1 for base access
[ 0.060003] PCI: Using configuration type 1 for extended access
[ 0.060003] bio: create slab <bio-0> at 0
[ 0.060003] ACPI: Added _OSI(Module Device)
[ 0.060003] ACPI: Added _OSI(Processor Device)
[ 0.060003] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.060003] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.060003] ACPI: EC: Look up EC in DSDT
[ 0.060003] \_SB_:_OSC evaluation returned wrong type
[ 0.060003] _OSC request data:1 17
[ 0.063177] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.064048] ACPI Warning: Incorrect checksum in table [APIC] - 0x69, should be 0x6C (20110623/tbutils-314)
[ 0.064057] ACPI: OEMN 6fe914f2 00541 (v01 AMD NAHP 00000001 MSFT 03000001)
[ 0.064367] ACPI: Dynamic OEM Table Load:
[ 0.064371] ACPI: OEMN (null) 00541 (v01 AMD NAHP 00000001 MSFT 03000001)
[ 0.064479] ACPI: OEMT 6fe91a33 0028B (v01 AMD THER 00000001 MSFT 03000001)
[ 0.064845] ACPI: Dynamic OEM Table Load:
[ 0.064848] ACPI: OEMT (null) 0028B (v01 AMD THER 00000001 MSFT 03000001)
[ 0.065152] ACPI Warning: Incorrect checksum in table [APIC] - 0x69, should be 0x6C (20110623/tbutils-314)
[ 0.065454] ACPI: Interpreter enabled
[ 0.065466] ACPI: (supports S0 S3 S4 S5)
[ 0.065485] ACPI: Using IOAPIC for interrupt routing
[ 0.065637] PCI: MMCONFIG for domain 0000 [bus 00-03] at [mem 0xe0000000-0xe03fffff] (base 0xe0000000)
[ 0.066182] [Firmware Bug]: PCI: MMCONFIG at [mem 0xe0000000-0xe03fffff] not reserved in ACPI motherboard resources
[ 0.066233] PCI: not using MMCONFIG
[ 0.066595] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.066876] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.070809] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.071151] System has AMD C1E enabled
[ 0.071163] Switch to broadcast mode on CPU0
[ 0.071163] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.071163] ACPI: No dock devices found.
[ 0.071163] [Firmware Warn]: HEST: Duplicated hardware error source ID: 9.
[ 0.071163] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.071163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.071279] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.071284] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
[ 0.071288] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
[ 0.071291] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
[ 0.071295] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
[ 0.071298] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
[ 0.071302] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
[ 0.071305] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
[ 0.071309] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
[ 0.071312] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.071316] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.071319] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.071345] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.071414] pci 0000:00:01.0: [144d:9602] type 1 class 0x000604
[ 0.071467] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[ 0.071517] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.071521] pci 0000:00:04.0: PME# disabled
[ 0.071542] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[ 0.072055] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.072059] pci 0000:00:06.0: PME# disabled
[ 0.072099] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.072124] pci 0000:00:11.0: reg 10: [io 0x8440-0x8447]
[ 0.072136] pci 0000:00:11.0: reg 14: [io 0x8430-0x8433]
[ 0.072147] pci 0000:00:11.0: reg 18: [io 0x8420-0x8427]
[ 0.072158] pci 0000:00:11.0: reg 1c: [io 0x8410-0x8413]
[ 0.072170] pci 0000:00:11.0: reg 20: [io 0x8400-0x840f]
[ 0.072181] pci 0000:00:11.0: reg 24: [mem 0xd0608c00-0xd0608fff]
[ 0.072258] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.072274] pci 0000:00:12.0: reg 10: [mem 0xd0404000-0xd0404fff]
[ 0.072354] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.072375] pci 0000:00:12.2: reg 10: [mem 0xd0608000-0xd06080ff]
[ 0.072466] pci 0000:00:12.2: supports D1 D2
[ 0.072469] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.072474] pci 0000:00:12.2: PME# disabled
[ 0.072498] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.072513] pci 0000:00:13.0: reg 10: [mem 0xd0405000-0xd0405fff]
[ 0.072593] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.072614] pci 0000:00:13.2: reg 10: [mem 0xd0608400-0xd06084ff]
[ 0.072705] pci 0000:00:13.2: supports D1 D2
[ 0.072708] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.072713] pci 0000:00:13.2: PME# disabled
[ 0.072736] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.072824] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.072848] pci 0000:00:14.2: reg 10: [mem 0xd0400000-0xd0403fff 64bit]
[ 0.072921] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.072927] pci 0000:00:14.2: PME# disabled
[ 0.072942] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.073026] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.073073] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.073089] pci 0000:00:14.5: reg 10: [mem 0xd0406000-0xd0406fff]
[ 0.073165] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.073181] pci 0000:00:16.0: reg 10: [mem 0xd0407000-0xd0407fff]
[ 0.073260] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.073281] pci 0000:00:16.2: reg 10: [mem 0xd0608800-0xd06088ff]
[ 0.073372] pci 0000:00:16.2: supports D1 D2
[ 0.073375] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.073380] pci 0000:00:16.2: PME# disabled
[ 0.073402] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.073425] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.073444] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.073463] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.073485] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.073541] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
[ 0.073553] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.073560] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
[ 0.073567] pci 0000:01:05.0: reg 18: [mem 0xd0100000-0xd010ffff]
[ 0.073581] pci 0000:01:05.0: reg 24: [mem 0xd0000000-0xd00fffff]
[ 0.073606] pci 0000:01:05.0: supports D1 D2
[ 0.073621] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
[ 0.073632] pci 0000:01:05.1: reg 10: [mem 0xd0110000-0xd0113fff]
[ 0.073675] pci 0000:01:05.1: supports D1 D2
[ 0.073718] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.073723] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.073728] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.073733] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.073786] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280
[ 0.073807] pci 0000:02:00.0: reg 10: [mem 0xd0200000-0xd0203fff 64bit]
[ 0.073912] pci 0000:02:00.0: supports D1 D2
[ 0.073915] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.073920] pci 0000:02:00.0: PME# disabled
[ 0.080042] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.080052] pci 0000:00:04.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.080119] pci 0000:03:00.0: [11ab:4354] type 0 class 0x000200
[ 0.080144] pci 0000:03:00.0: reg 10: [mem 0xd0300000-0xd0303fff 64bit]
[ 0.080158] pci 0000:03:00.0: reg 18: [io 0xa000-0xa0ff]
[ 0.080260] pci 0000:03:00.0: supports D1 D2
[ 0.080263] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.080269] pci 0000:03:00.0: PME# disabled
[ 0.088043] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.088052] pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
[ 0.088056] pci 0000:00:06.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.088130] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.088141] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.088145] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
[ 0.088149] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
[ 0.088153] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
[ 0.088157] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
[ 0.088160] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
[ 0.088164] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
[ 0.088168] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
[ 0.088171] pci 0000:00:14.4: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[ 0.088175] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.088179] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.088182] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.088200] pci_bus 0000:00: on NUMA node 0
[ 0.088209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.088459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.088521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.088627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.088715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.088882] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.089089] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.095694] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
[ 0.095763] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
[ 0.095837] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
[ 0.095909] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[ 0.095966] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[ 0.096022] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[ 0.096069] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[ 0.096113] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[ 0.096239] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.096243] vgaarb: loaded
[ 0.096245] vgaarb: bridge control possible 0000:01:05.0
[ 0.096286] PCI: Using ACPI for IRQ routing
[ 0.096291] PCI: pci_cache_line_size set to 64 bytes
[ 0.096382] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.096386] reserve RAM buffer: 000000006fe70000 - 000000006fffffff
[ 0.096512] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.096518] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.098562] Switching to clocksource hpet
[ 0.098569] pnp: PnP ACPI init
[ 0.098569] ACPI: bus type pnp registered
[ 0.098569] pnp 00:00: [bus 00-ff]
[ 0.098569] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.098569] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.098569] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.098569] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.098569] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.098569] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.098569] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.098569] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.098569] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.098569] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.098569] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.098569] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.098569] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.098569] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.098569] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.098569] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.098569] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.098569] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.098569] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.098569] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.098569] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.098571] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.098574] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.098577] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.098580] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.098584] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.098588] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.098592] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.098595] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.098598] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.098671] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.098726] pnp 00:01: [io 0x0f50-0x0f51]
[ 0.098729] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.098732] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.098789] system 00:01: [io 0x0f50-0x0f51] has been reserved
[ 0.098794] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.098798] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.098802] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.099231] pnp 00:02: [io 0x0000-0x001f]
[ 0.099234] pnp 00:02: [io 0x0080-0x008f]
[ 0.099237] pnp 00:02: [io 0x00c0-0x00df]
[ 0.099240] pnp 00:02: [dma 4]
[ 0.099284] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.099295] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.099306] pnp 00:03: [irq 13]
[ 0.099344] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.099356] pnp 00:04: [io 0x0070-0x0071]
[ 0.099362] pnp 00:04: [irq 8]
[ 0.099402] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.099412] pnp 00:05: [io 0x0061]
[ 0.099450] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.099462] pnp 00:06: [io 0x0060]
[ 0.099464] pnp 00:06: [io 0x0064]
[ 0.099469] pnp 00:06: [irq 1]
[ 0.099508] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.099531] pnp 00:07: [irq 12]
[ 0.099572] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.099599] pnp 00:08: [io 0x0022-0x0023]
[ 0.099602] pnp 00:08: [io 0x002e-0x002f]
[ 0.099605] pnp 00:08: [io 0x0072-0x0073]
[ 0.099607] pnp 00:08: [io 0x0080-0x0081]
[ 0.099610] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.099613] pnp 00:08: [io 0x00b8]
[ 0.099615] pnp 00:08: [io 0x0092]
[ 0.099618] pnp 00:08: [io 0x0220-0x022f]
[ 0.099621] pnp 00:08: [io 0x040b]
[ 0.099623] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.099626] pnp 00:08: [io 0x04d6]
[ 0.099629] pnp 00:08: [io 0x0530-0x0537]
[ 0.099631] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.099634] pnp 00:08: [io 0x0c14]
[ 0.099637] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.099639] pnp 00:08: [io 0x0c6c]
[ 0.099642] pnp 00:08: [io 0x0c6f]
[ 0.099644] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.099647] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.099650] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.099653] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.099655] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.099658] pnp 00:08: [io 0x8000-0x805f]
[ 0.099661] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.099664] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.099667] pnp 00:08: [io 0x0f40-0x0f47]
[ 0.099670] pnp 00:08: [io 0x087f]
[ 0.099752] system 00:08: [io 0x0220-0x022f] has been reserved
[ 0.099756] system 00:08: [io 0x040b] has been reserved
[ 0.099760] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.099763] system 00:08: [io 0x04d6] has been reserved
[ 0.099767] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.099771] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.099774] system 00:08: [io 0x0c14] has been reserved
[ 0.099778] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.099781] system 00:08: [io 0x0c6c] has been reserved
[ 0.099786] system 00:08: [io 0x0c6f] has been reserved
[ 0.099790] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.099794] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.099798] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.099801] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.099805] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.099809] system 00:08: [io 0x8000-0x805f] has been reserved
[ 0.099813] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.099816] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.099820] system 00:08: [io 0x0f40-0x0f47] has been reserved
[ 0.099824] system 00:08: [io 0x087f] has been reserved
[ 0.099828] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.099891] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.099894] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.099898] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.099901] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.099904] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.099907] pnp 00:09: [mem 0xfed61000-0xfed613ff]
[ 0.099910] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.099937] pnp 00:09: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xefffffff]; adding more reservations
[ 0.099985] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.099990] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.099994] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.100012] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.100016] system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved
[ 0.100020] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.100025] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.100397] pnp: PnP ACPI: found 10 devices
[ 0.100401] ACPI: ACPI bus type pnp unregistered
[ 0.100405] PnPBIOS: Disabled by ACPI PNP
[ 0.136882] PCI: max bus depth: 1 pci_try_num: 2
[ 0.136910] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.136915] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.136920] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd01fffff]
[ 0.136925] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.136930] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.136935] pci 0000:00:04.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.136942] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 0.136945] pci 0000:00:06.0: bridge window [io 0xa000-0xafff]
[ 0.136950] pci 0000:00:06.0: bridge window [mem 0xd0300000-0xd03fffff]
[ 0.136956] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.136987] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.136992] pci 0000:00:04.0: setting latency timer to 64
[ 0.137002] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.137006] pci 0000:00:06.0: setting latency timer to 64
[ 0.137016] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.137019] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d1fff]
[ 0.137022] pci_bus 0000:00: resource 6 [mem 0x000d2000-0x000d3fff]
[ 0.137026] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d5fff]
[ 0.137029] pci_bus 0000:00: resource 8 [mem 0x000d6000-0x000d7fff]
[ 0.137032] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000d9fff]
[ 0.137035] pci_bus 0000:00: resource 10 [mem 0x000da000-0x000dbfff]
[ 0.137039] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000ddfff]
[ 0.137042] pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff]
[ 0.137045] pci_bus 0000:00: resource 13 [mem 0xf0000000-0xffffffff]
[ 0.137049] pci_bus 0000:00: resource 14 [io 0x0000-0x0cf7]
[ 0.137052] pci_bus 0000:00: resource 15 [io 0x0d00-0xffff]
[ 0.137055] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.137058] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd01fffff]
[ 0.137062] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.137065] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.137069] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.137072] pci_bus 0000:03: resource 1 [mem 0xd0300000-0xd03fffff]
[ 0.137075] pci_bus 0000:04: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.137079] pci_bus 0000:04: resource 5 [mem 0x000d0000-0x000d1fff]
[ 0.137082] pci_bus 0000:04: resource 6 [mem 0x000d2000-0x000d3fff]
[ 0.137085] pci_bus 0000:04: resource 7 [mem 0x000d4000-0x000d5fff]
[ 0.137088] pci_bus 0000:04: resource 8 [mem 0x000d6000-0x000d7fff]
[ 0.137092] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000d9fff]
[ 0.137095] pci_bus 0000:04: resource 10 [mem 0x000da000-0x000dbfff]
[ 0.137098] pci_bus 0000:04: resource 11 [mem 0x000dc000-0x000ddfff]
[ 0.137101] pci_bus 0000:04: resource 12 [mem 0x80000000-0xdfffffff]
[ 0.137105] pci_bus 0000:04: resource 13 [mem 0xf0000000-0xffffffff]
[ 0.137108] pci_bus 0000:04: resource 14 [io 0x0000-0x0cf7]
[ 0.137111] pci_bus 0000:04: resource 15 [io 0x0d00-0xffff]
[ 0.137152] NET: Registered protocol family 2
[ 0.137224] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.137506] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.138127] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.138438] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.138442] TCP reno registered
[ 0.138446] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.138458] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.138555] NET: Registered protocol family 1
[ 0.138569] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.138596] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.212081] pci 0000:00:12.0: PCI INT A disabled
[ 0.212114] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.212138] pci 0000:00:12.2: PCI INT B disabled
[ 0.212147] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.288088] pci 0000:00:13.0: PCI INT A disabled
[ 0.288110] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.288133] pci 0000:00:13.2: PCI INT B disabled
[ 0.288152] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.364115] pci 0000:00:14.5: PCI INT C disabled
[ 0.364135] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.440115] pci 0000:00:16.0: PCI INT A disabled
[ 0.440136] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.440159] pci 0000:00:16.2: PCI INT B disabled
[ 0.440173] pci 0000:01:05.0: Boot video device
[ 0.440184] PCI: CLS 32 bytes, default 64
[ 0.440265] Unpacking initramfs...
[ 0.776329] Freeing initrd memory: 9524k freed
[ 0.780624] IBS: LVT offset 1 assigned
[ 0.780638] perf: AMD IBS detected (0x0000001f)
[ 0.780811] audit: initializing netlink socket (disabled)
[ 0.780825] type=2000 audit(1337696306.780:1): initialized
[ 0.802540] highmem bounce pool size: 64 pages
[ 0.802548] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.808182] VFS: Disk quotas dquot_6.5.2
[ 0.808221] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.808297] msgmni has been set to 1739
[ 0.808493] alg: No test for stdrng (krng)
[ 0.808520] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.808524] io scheduler noop registered
[ 0.808527] io scheduler deadline registered
[ 0.808536] io scheduler cfq registered (default)
[ 0.808642] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.808680] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.808761] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.808792] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.808897] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 0.808900] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.808905] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 0.808921] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.808924] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.808928] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.808949] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.808977] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.808980] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.809400] APEI: Can not request iomem region <000000006fe92ddc-000000006fe92dde> for GARs.
[ 0.809485] GHES: HEST is not enabled!
[ 0.809500] isapnp: Scanning for PnP cards...
[ 1.194998] isapnp: No Plug & Play device found
[ 1.195061] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.195564] Linux agpgart interface v0.103
[ 1.195960] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PSM0] at 0x60,0x64 irq 1,12
[ 1.198740] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.198747] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.198873] mousedev: PS/2 mouse device common for all mice
[ 1.199029] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.199061] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.199072] cpuidle: using governor ladder
[ 1.199075] cpuidle: using governor menu
[ 1.199343] TCP cubic registered
[ 1.199369] NET: Registered protocol family 10
[ 1.200072] Mobile IPv6
[ 1.200075] NET: Registered protocol family 17
[ 1.200082] Registering the dns_resolver key type
[ 1.200098] Using IPI No-Shortcut mode
[ 1.200191] PM: Hibernation image not present or could not be loaded.
[ 1.200201] registered taskstats version 1
[ 1.203349] rtc_cmos 00:04: setting system clock to 2012-05-22 14:18:27 UTC (1337696307)
[ 1.203400] Initializing network drop monitor service
[ 1.203509] Freeing unused kernel memory: 412k freed
[ 1.203676] Write protecting the kernel text: 2844k
[ 1.203711] Write protecting the kernel read-only data: 1112k
[ 1.203714] NX-protecting the kernel data: 3300k
[ 1.222431] udev[44]: starting version 164
[ 1.231725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.268078] sky2: driver version 1.30
[ 1.279759] usbcore: registered new interface driver usbfs
[ 1.279787] usbcore: registered new interface driver hub
[ 1.324507] sky2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.324522] sky2 0000:03:00.0: setting latency timer to 64
[ 1.324557] sky2 0000:03:00.0: Yukon-2 FE+ chip revision 0
[ 1.324647] sky2 0000:03:00.0: irq 42 for MSI/MSI-X
[ 1.325352] sky2 0000:03:00.0: eth0: addr 00:24:54:cc:53:99
[ 1.367525] SCSI subsystem initialized
[ 1.369645] usbcore: registered new device driver usb
[ 1.370133] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.370199] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.370222] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.370249] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.370261] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.370282] QUIRK: Enable AMD PLL fix
[ 1.370295] ehci_hcd 0000:00:12.2: debug port 1
[ 1.370324] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd0608000
[ 1.376417] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.376422] ACPI: Thermal Zone [THZ0] (59 C)
[ 1.382037] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.382084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.382088] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.382092] usb usb1: Product: EHCI Host Controller
[ 1.382094] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.382097] usb usb1: SerialNumber: 0000:00:12.2
[ 1.382231] hub 1-0:1.0: USB hub found
[ 1.382237] hub 1-0:1.0: 5 ports detected
[ 1.382377] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.382401] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.382411] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.382421] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.382446] ehci_hcd 0000:00:13.2: debug port 1
[ 1.382462] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd0608400
[ 1.392043] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.392103] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.392108] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.392111] usb usb2: Product: EHCI Host Controller
[ 1.392114] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.392117] usb usb2: SerialNumber: 0000:00:13.2
[ 1.392255] hub 2-0:1.0: USB hub found
[ 1.392261] hub 2-0:1.0: 5 ports detected
[ 1.392400] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.392422] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.392432] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.392442] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.392469] ehci_hcd 0000:00:16.2: debug port 1
[ 1.392485] ehci_hcd 0000:00:16.2: irq 17, io mem 0xd0608800
[ 1.392879] libata version 3.00 loaded.
[ 1.404113] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.404155] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.404159] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.404163] usb usb3: Product: EHCI Host Controller
[ 1.404165] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.404168] usb usb3: SerialNumber: 0000:00:16.2
[ 1.404341] hub 3-0:1.0: USB hub found
[ 1.404347] hub 3-0:1.0: 4 ports detected
[ 1.405318] ahci 0000:00:11.0: version 3.0
[ 1.405347] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.405402] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 1.405484] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x9 impl SATA mode
[ 1.405489] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.407669] scsi0 : ahci
[ 1.407879] scsi1 : ahci
[ 1.410075] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.410096] scsi2 : ahci
[ 1.410526] scsi3 : ahci
[ 1.410843] ata1: SATA max UDMA/133 abar m1024@0xd0608c00 port 0xd0608d00 irq 43
[ 1.410847] ata2: DUMMY
[ 1.410849] ata3: DUMMY
[ 1.410853] ata4: SATA max UDMA/133 abar m1024@0xd0608c00 port 0xd0608e80 irq 43
[ 1.411003] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.411028] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.411043] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.411081] ohci_hcd 0000:00:12.0: irq 18, io mem 0xd0404000
[ 1.468128] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.468134] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.468138] usb usb4: Product: OHCI Host Controller
[ 1.468140] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.468143] usb usb4: SerialNumber: 0000:00:12.0
[ 1.468422] hub 4-0:1.0: USB hub found
[ 1.468466] hub 4-0:1.0: 5 ports detected
[ 1.468558] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.468583] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.468593] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.468614] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0405000
[ 1.528363] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.528368] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.528372] usb usb5: Product: OHCI Host Controller
[ 1.528375] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.528377] usb usb5: SerialNumber: 0000:00:13.0
[ 1.528646] hub 5-0:1.0: USB hub found
[ 1.528690] hub 5-0:1.0: 5 ports detected
[ 1.528783] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.528807] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.528817] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.528839] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd0406000
[ 1.588130] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.588135] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.588139] usb usb6: Product: OHCI Host Controller
[ 1.588141] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.588144] usb usb6: SerialNumber: 0000:00:14.5
[ 1.588417] hub 6-0:1.0: USB hub found
[ 1.588461] hub 6-0:1.0: 2 ports detected
[ 1.588550] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.588574] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.588587] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.588609] ohci_hcd 0000:00:16.0: irq 18, io mem 0xd0407000
[ 1.648138] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.648143] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.648146] usb usb7: Product: OHCI Host Controller
[ 1.648149] usb usb7: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.648152] usb usb7: SerialNumber: 0000:00:16.0
[ 1.648423] hub 7-0:1.0: USB hub found
[ 1.648468] hub 7-0:1.0: 4 ports detected
[ 1.728115] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.796102] Refined TSC clocksource calibration: 1695.752 MHz.
[ 1.796110] Switching to clocksource tsc
[ 1.804102] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 1.900108] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.901228] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC66G, max UDMA/133
[ 1.901234] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.902545] ata1.00: configured for UDMA/133
[ 1.902678] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[ 1.911330] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.911382] sd 0:0:0:0: [sda] Write Protect is off
[ 1.911386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.911408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.946084] usb 2-2: New USB device found, idVendor=13fe, idProduct=1f23
[ 1.946090] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.946094] usb 2-2: Product: STORE N GO
[ 1.946096] usb 2-2: Manufacturer: Verbatim
[ 1.946099] usb 2-2: SerialNumber: 078517A0048B
[ 1.949732] usbcore: registered new interface driver uas
[ 2.056108] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 2.192295] usb 2-4: New USB device found, idVendor=2232, idProduct=1001
[ 2.192300] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.192304] usb 2-4: Product: WebCam SCB-0370N
[ 2.192307] usb 2-4: Manufacturer: Namuga
[ 2.192309] usb 2-4: SerialNumber: SM3711
[ 2.263969] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 2.264602] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.266957] Initializing USB Mass Storage driver...
[ 2.267720] scsi4 : usb-storage 2-2:1.0
[ 2.267820] usbcore: registered new interface driver usb-storage
[ 2.267823] USB Mass Storage support registered.
[ 2.456098] usb 4-3: new full-speed USB device number 2 using ohci_hcd
[ 2.631203] usb 4-3: New USB device found, idVendor=0a5c, idProduct=219c
[ 2.631209] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.631213] usb 4-3: Product: Broadcom BCM2070 Bluetooth Device
[ 2.631216] usb 4-3: Manufacturer: Broadcom Corp
[ 2.631218] usb 4-3: SerialNumber: E839DF5866A1
[ 3.265553] scsi 4:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 3.267240] sd 4:0:0:0: [sdb] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 3.267734] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.267739] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.268791] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.268874] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.271916] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.271965] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.272696] sdb: sdb1 sdb2
[ 3.275611] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.275660] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.275706] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.380862] EXT4-fs (sdb2): mounted filesystem without journal. Opts: (null)
[ 3.868750] udev[327]: starting version 164
[ 4.157697] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.171681] cfg80211: Calling CRDA to update world regulatory domain
[ 4.175145] Bluetooth: Core ver 2.16
[ 4.175164] NET: Registered protocol family 31
[ 4.175167] Bluetooth: HCI device and connection manager initialized
[ 4.175172] Bluetooth: HCI socket layer initialized
[ 4.175174] Bluetooth: L2CAP socket layer initialized
[ 4.175183] Bluetooth: SCO socket layer initialized
[ 4.208869] ACPI: resource piix4_smbus [io 0x8040-0x8047] conflicts with ACPI region SMB0 [io 0x8040-0x804f]
[ 4.208874] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.238337] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 4.249464] samsung_laptop: found laptop model 'X125'
[ 4.254416] samsung_laptop: enabled workaround for brightness stepping quirk
[ 4.303864] ACPI: processor limited to max C-state 1
[ 4.307858] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 4.311241] acpi device:44: registered as cooling_device1
[ 4.311438] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:42/LNXVIDEO:02/input/input2
[ 4.311447] ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no)
[ 4.312423] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.312499] SP5100 TCO timer: mmio address 0xb88100 already in use
[ 4.313783] ACPI: Battery Slot [BATT] (battery present)
[ 4.320191] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.323403] usbcore: registered new interface driver btusb
[ 4.360573] Linux media interface: v0.10
[ 4.366770] Linux video capture interface: v2.00
[ 4.368089] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 4.369663] ACPI: Power Button [PWRB]
[ 4.369773] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 4.369867] ACPI: Sleep Button [SLPB]
[ 4.369943] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 4.370593] ACPI: Lid Switch [LID]
[ 4.370668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.371095] ACPI: Power Button [PWRF]
[ 4.373514] ACPI: AC Adapter [ACAD] (on-line)
[ 4.531517] uvcvideo: Found UVC 1.00 device WebCam SCB-0370N (2232:1001)
[ 4.533511] input: WebCam SCB-0370N as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input7
[ 4.533846] usbcore: registered new interface driver uvcvideo
[ 4.533850] USB Video Class driver (1.1.1)
[ 4.558580] [drm] Initialized drm 1.1.0 20060810
[ 4.582759] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.623396] [drm] radeon kernel modesetting enabled.
[ 4.623519] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.623526] radeon 0000:01:05.0: setting latency timer to 64
[ 4.623771] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x144D:0xC566).
[ 4.623797] [drm] register mmio base: 0xD0100000
[ 4.623799] [drm] register mmio size: 65536
[ 4.623986] ATOM BIOS: BR36734.001
[ 4.624032] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 4.624037] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 4.624331] [drm] Detected VRAM RAM=256M, BAR=256M
[ 4.624336] [drm] RAM width 32bits DDR
[ 4.625655] [TTM] Zone kernel: Available graphics memory: 445420 kiB.
[ 4.625659] [TTM] Zone highmem: Available graphics memory: 906448 kiB.
[ 4.625662] [TTM] Initializing pool allocator.
[ 4.625686] [drm] radeon: 256M of VRAM memory ready
[ 4.625689] [drm] radeon: 512M of GTT memory ready.
[ 4.625706] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.625708] [drm] Driver supports precise vblank timestamp query.
[ 4.625735] [drm] radeon: irq initialized.
[ 4.625740] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.627317] [drm] Loading RS780 Microcode
[ 4.694290] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 4.694450] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 4.731827] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 11
[ 4.731845] brcmsmac 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.731853] brcmsmac 0000:02:00.0: setting latency timer to 64
[ 4.757486] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 4.758795] radeon 0000:01:05.0: WB enabled
[ 4.792438] [drm] ring test succeeded in 0 usecs
[ 4.792575] [drm] radeon: ib pool ready.
[ 4.792663] [drm] ib test succeeded in 0 usecs
[ 4.794160] [drm] Radeon Display Connectors
[ 4.794164] [drm] Connector 0:
[ 4.794166] [drm] LVDS
[ 4.794169] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 4.794172] [drm] Encoders:
[ 4.794174] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 4.794177] [drm] Connector 1:
[ 4.794179] [drm] VGA
[ 4.794181] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 4.794184] [drm] Encoders:
[ 4.794186] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.794188] [drm] Connector 2:
[ 4.794190] [drm] HDMI-A
[ 4.794192] [drm] HPD1
[ 4.794195] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 4.794197] [drm] Encoders:
[ 4.794199] [drm] DFP1: INTERNAL_UNIPHY
[ 4.794334] [drm] radeon: power management initialized
[ 4.827833] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.997323] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 5.039779] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 5.821899] [drm] fb mappable at 0xC0142000
[ 5.821903] [drm] vram apper at 0xC0000000
[ 5.821905] [drm] size 4325376
[ 5.821907] [drm] fb depth is 24
[ 5.821909] [drm] pitch is 5632
[ 5.822072] fbcon: radeondrmfb (fb0) is primary device
[ 5.903736] Console: switching to colour frame buffer device 170x48
[ 5.919686] fb0: radeondrmfb frame buffer device
[ 5.919689] drm: registered panic notifier
[ 5.919698] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
[ 5.919749] snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.919814] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 6.208675] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 6.275039] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 6.320597] loop: module loaded
[ 7.107334] EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
[ 7.661462] fuse init (API version 7.17)
[ 8.577462] powernow-k8: Found 1 AMD Athlon(tm) II Neo K125 Processor (1 cpu cores) (version 2.20.00)
[ 8.577509] powernow-k8: 0 : pstate 0 (1700 MHz)
[ 8.577512] powernow-k8: 1 : pstate 1 (1300 MHz)
[ 8.577515] powernow-k8: 2 : pstate 2 (800 MHz)
[ 8.709601] Bluetooth: RFCOMM TTY layer initialized
[ 8.709610] Bluetooth: RFCOMM socket layer initialized
[ 8.709614] Bluetooth: RFCOMM ver 1.11
[ 8.739288] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.739293] Bluetooth: BNEP filters: protocol multicast
[ 8.754587] Bridge firewalling registered
[ 9.805235] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 9.809816] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 9.814840] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 9.820566] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.827370] sky2 0000:03:00.0: eth0: enabling interface
[ 9.828236] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 168.504624] wlan0: authenticate with 00:24:a5:da:fa:e8 (try 1)
[ 168.506606] wlan0: authenticated
[ 168.506642] wlan0: associate with 00:24:a5:da:fa:e8 (try 1)
[ 168.510172] wlan0: RX AssocResp from 00:24:a5:da:fa:e8 (capab=0x411 status=0 aid=1)
[ 168.510177] wlan0: associated
[ 168.510767] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 168.510777] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 168.510784] ieee80211 phy0: changing basic rates failed: -22
[ 168.510789] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 168.511067] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 168.916504] Intel AES-NI instructions are not detected.
[ 172.730815] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 178.832134] wlan0: no IPv6 routers present
[42420.620394] ieee80211 phy0: AMPDU status: BA Timeout, seq 1904, in_transit 0
[44836.530183] ieee80211 phy0: AMPDU status: BA Timeout, seq 1968, in_transit 0
[73570.920008] ------------[ cut here ]------------
[73570.920038] WARNING: at /build/buildd-linux-2.6_3.2.18-1-i386-rwdM7y/linux-2.6-3.2.18/debian/build/source_i386_none/drivers/net/wireless/brcm80211/brcmsmac/main.c:8241 brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]()
[73570.920045] Hardware name: X125
[73570.920048] Modules linked in: cryptd aes_i586 aes_generic bridge stp bnep rfcomm powernow_k8 mperf cpufreq_stats cpufreq_userspace cpufreq_conservative cpufreq_powersave fuse loop snd_hda_codec_hdmi joydev arc4 brcmsmac mac80211 brcmutil snd_hda_codec_realtek radeon snd_hda_intel ttm drm_kms_helper drm uvcvideo snd_hda_codec snd_hwdep snd_pcm snd_seq tpm_tis tpm tpm_bios snd_timer ac button videodev media btusb evdev sp5100_tco snd_seq_device video battery processor k10temp snd samsung_laptop i2c_algo_bit pcspkr power_supply i2c_piix4 i2c_core bluetooth cfg80211 shpchp rfkill psmouse serio_raw soundcore crc8 snd_page_alloc cordic ext4 mbcache jbd2 crc16 usb_storage uas sd_mod crc_t10dif ohci_hcd ahci libahci libata ehci_hcd scsi_mod thermal thermal_sys usbcore usb_common sky2 [last unloaded: scsi_wait_scan]
[73570.920137] Pid: 3127, comm: kworker/u:2 Not tainted 3.2.0-2-686-pae #1
[73570.920140] Call Trace:
[73570.920150] [<c1038468>] ? warn_slowpath_common+0x68/0x79
[73570.920169] [<f8759e22>] ? brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]
[73570.920175] [<c1038486>] ? warn_slowpath_null+0xd/0x10
[73570.920193] [<f8759e22>] ? brcms_c_wait_for_tx_completion+0x73/0x7d [brcmsmac]
[73570.920206] [<f875110f>] ? brcms_ops_flush+0x1f/0x29 [brcmsmac]
[73570.920224] [<f86abdca>] ? ieee80211_scan_work+0x36a/0x3fb [mac80211]
[73570.920231] [<c1049aef>] ? process_one_work+0x112/0x1fa
[73570.920246] [<f86aba60>] ? ieee80211_scan_rx+0x139/0x139 [mac80211]
[73570.920252] [<c104a7fa>] ? worker_thread+0xa9/0x122
[73570.920258] [<c104a751>] ? manage_workers.isra.23+0x13d/0x13d
[73570.920263] [<c104d13b>] ? kthread+0x63/0x68
[73570.920268] [<c104d0d8>] ? kthread_worker_fn+0x101/0x101
[73570.920275] [<c12c5c7e>] ? kernel_thread_helper+0x6/0x10
[73570.920279] ---[ end trace b3b9484c4306740d ]---
[263710.348647] ieee80211 phy0: AMPDU status: BA Timeout, seq 3712, in_transit 0
[263747.786027] ieee80211 phy0: AMPDU status: BA Timeout, seq 2482, in_transit 0
[263970.716604] ieee80211 phy0: AMPDU status: BA Timeout, seq 3757, in_transit 0
Reply to: