Bug#674153: linux-image-3.2.0-2-amd64: High CPU load when idle
Package: linux-2.6
Version: 3.2.17-1
Severity: normal
Hi!
Starting with 3.2.17-1, the CPU load accounting is broken when the
computer is idle. The CPU load is reported as >0.50 when
idle. 3.2.16-1 don't suffer from this problem.
Suspected patch is the upstream patch
"sched: Fix nohz load accounting -- again!"
commit 5e2d50da11f0e6ec3ce8fe658d7c83b0b4346c68 to 3.2 and
originating from c308b56b5398779cd3da0f62ab26b0453494c3d4 .
See also:
https://bugs.launchpad.net/unity/+bug/991370
https://lkml.org/lkml/2012/5/22/310
https://bugzilla.redhat.com/show_bug.cgi?id=822877
https://bbs.archlinux.org/viewtopic.php?id=141289
/ Anders
-- Package-specific info:
** Version:
Linux version 3.2.0-2-amd64 (Debian 3.2.17-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Sat May 12 23:08:28 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=/dev/sdb1 ro vga=771 video=vesafb:vtotal:128,mtrr:3 hpet=force sata_nv.adma=1 acpi_enforce_resources=lax devtmpfs.mount=1 quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 5.536456] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 5.536480] ehci_hcd 0000:00:0b.1: irq 22, io mem 0x80005000
[ 5.548119] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 5.548155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.548159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.548161] usb usb1: Product: EHCI Host Controller
[ 5.548164] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 5.548166] usb usb1: SerialNumber: 0000:00:0b.1
[ 5.548317] hub 1-0:1.0: USB hub found
[ 5.548323] hub 1-0:1.0: 10 ports detected
[ 5.550452] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.551004] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 5.551027] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 5.551030] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 5.551043] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 5.551078] ohci_hcd 0000:00:0b.0: irq 23, io mem 0x80000000
[ 5.606029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.606034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.606037] usb usb2: Product: OHCI Host Controller
[ 5.606039] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 5.606042] usb usb2: SerialNumber: 0000:00:0b.0
[ 5.606285] hub 2-0:1.0: USB hub found
[ 5.606292] hub 2-0:1.0: 10 ports detected
[ 5.606871] EDAC amd64: DRAM ECC disabled.
[ 5.606877] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.606878] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.606880] (Note that use of the override may cause unknown side effects.)
[ 5.607147] pata_amd 0000:00:0f.0: version 0.4.1
[ 5.607194] pata_amd 0000:00:0f.0: setting latency timer to 64
[ 5.607709] scsi4 : pata_amd
[ 5.607832] scsi5 : pata_amd
[ 5.609035] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 5.609038] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 5.609520] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
[ 5.609526] snd_intel8x0 0000:00:0d.0: PCI INT A -> Link[LACI] -> GSI 22 (level, low) -> IRQ 22
[ 5.609549] snd_intel8x0 0000:00:0d.0: setting latency timer to 64
[ 5.764418] ata5.00: ATAPI: SONY DVD-ROM DDU1612, DYS3, max UDMA/33
[ 5.764428] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[ 5.764836] ata5.00: configured for UDMA/33
[ 5.765623] scsi 4:0:0:0: CD-ROM SONY DVD-ROM DDU1612 DYS3 PQ: 0 ANSI: 5
[ 5.818930] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 5.818953] nvidia 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 5.818963] nvidia 0000:03:00.0: setting latency timer to 64
[ 5.818968] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.819330] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.49 Mon Apr 30 23:46:33 PDT 2012
[ 5.937948] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 5.937953] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.938326] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 5.940030] intel8x0_measure_ac97_clock: measured 55865 usecs (2744 samples)
[ 5.940034] intel8x0: clocking to 46907
[ 6.076462] ata1.00: configured for UDMA/133
[ 6.076469] ata1: EH complete
[ 6.108028] usb 2-2: new low-speed USB device number 2 using ohci_hcd
[ 6.148132] ata3.00: configured for UDMA/133
[ 6.148137] ata3: EH complete
[ 6.206396] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input4
[ 6.322032] usb 2-2: New USB device found, idVendor=046d, idProduct=c050
[ 6.322037] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.322040] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 6.322043] usb 2-2: Manufacturer: Logitech
[ 6.346319] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input5
[ 6.346507] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2/input0
[ 6.346567] usbcore: registered new interface driver usbhid
[ 6.346569] usbhid: USB HID core driver
[ 8.202589] Adding 2047996k swap on /dev/sdb2. Priority:-1 extents:1 across:2047996k SSD
[ 8.217882] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 8.349387] EXT4-fs (sdb1): re-mounted. Opts: acl,discard,user_xattr,errors=remount-ro
[ 8.365492] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout= 0)
[ 8.368785] it87: Found IT8712F chip at 0xd00, revision 7
[ 8.368794] it87: VID is disabled (pins used for GPIO)
[ 8.368840] ACPI: resource it87 [io 0x0d05-0x0d06] conflicts with ACPI region ECRE [io 0xd00-0xd1f]
[ 8.368843] ACPI: This conflict may cause random problems and system instability
[ 8.368845] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.109824] RPC: Registered named UNIX socket transport module.
[ 9.109828] RPC: Registered udp transport module.
[ 9.109830] RPC: Registered tcp transport module.
[ 9.109832] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.116286] FS-Cache: Loaded
[ 9.131273] FS-Cache: Netfs 'nfs' registered for caching
[ 9.138885] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.627151] fuse init (API version 7.17)
[ 10.321514] nvidia 0000:03:00.0: irq 45 for MSI/MSI-X
[ 10.332339] CacheFiles: Loaded
[ 10.423063] FS-Cache: Cache "mycache" added (type cachefiles)
[ 10.423069] CacheFiles: File cache on sdb1 registered
[ 10.583454] lp: driver loaded but no devices found
[ 10.587729] ppdev: user-space parallel port driver
[ 11.608293] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2 cpu cores) (version 2.20.00)
[ 11.608355] powernow-k8: fid 0xe (2200 MHz), vid 0x8
[ 11.608358] powernow-k8: fid 0xc (2000 MHz), vid 0xa
[ 11.608360] powernow-k8: fid 0xa (1800 MHz), vid 0xc
[ 11.608362] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 14.396047] ata3.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[ 14.396053] ata3.00: CPB resp_flags 0x11: , CMD error
[ 14.396058] ata3.00: failed command: SMART
[ 14.396066] ata3.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0
[ 14.396067] res 51/04:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
[ 14.396071] ata3.00: status: { DRDY ERR }
[ 14.396073] ata3.00: error: { ABRT }
[ 19.832051] eth0: no IPv6 routers present
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1303
board_vendor: ASUSTeK Computer INC.
board_name: A8N32-SLI-Deluxe
board_version: Rev 1.xx
** Loaded modules:
autofs4
powernow_k8
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
parport_pc
ppdev
lp
parport
cachefiles
binfmt_misc
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
eeprom
it87
hwmon_vid
softdog
usbhid
hid
sr_mod
cdrom
nvidia(P)
ohci_hcd
snd_intel8x0
snd_ac97_codec
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
pata_amd
snd
soundcore
psmouse
ac97_bus
edac_mce_amd
ehci_hcd
serio_raw
forcedeth
floppy
edac_core
pcspkr
k8temp
evdev
usbcore
usb_common
i2c_nforce2
i2c_core
button
processor
thermal_sys
ext4
crc16
jbd2
mbcache
sd_mod
crc_t10dif
ata_generic
sata_nv
libata
scsi_mod
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02f4] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81d2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.1 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81d2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81d2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81d2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81d2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02ff] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81d2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.6 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81d2]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81d2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fb] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: ddf00000-dfffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 Memory controller [0580]: NVIDIA Corporation CK804 Memory Controller [10de:005e] (rev a4)
Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:0a.0 ISA bridge [0601]: NVIDIA Corporation CK804 ISA Bridge [10de:0050] (rev a4)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0a.1 SMBus [0c05]: NVIDIA Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at ec00 [size=32]
Region 4: I/O ports at 0600 [size=64]
Region 5: I/O ports at 0700 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:0b.0 USB controller [0c03]: NVIDIA Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:0b.1 USB controller [0c03]: NVIDIA Corporation CK804 USB Controller [10de:005b] (rev a4) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at 80005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:0d.0 Multimedia audio controller [0401]: NVIDIA Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:812a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at e400 [size=256]
Region 1: I/O ports at e000 [size=256]
Region 2: Memory at 80001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
00:0f.0 IDE interface [0101]: NVIDIA Corporation CK804 IDE [10de:0053] (rev f3) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:10.0 IDE interface [0101]: NVIDIA Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at 80002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:11.0 IDE interface [0101]: NVIDIA Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at 80003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:12.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:13.0 Bridge [0680]: NVIDIA Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:8141]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 80004000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c480 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:16.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:17.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
03:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV44 [GeForce 7100 GS] [10de:016a] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at ddfe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (70, 'testing-proposed-updates'), (60, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=UTF-8) (ignored: LC_ALL set to sv_SE.UTF8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.43
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2
Versions of packages linux-image-3.2.0-2-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-2-amd64 suggests:
pn grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false
linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64:
linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true
Reply to: