--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-amd64: Boot process pauses indefinitely waiting for keyboard activity
- From: Bob Freemer <bob.freemer@gmail.com>
- Date: Wed, 16 Jun 2010 12:18:42 -0500
- Message-id: <20100616171842.4661.40890.reportbug@birch.wayzata.egeland.net>
Package: linux-2.6
Version: 2.6.32-15
Severity: critical
Tags: d-i squeeze
Justification: breaks the whole system
The kernel pauses waiting for any keyboard input early* in the boot process.
Pressing any key during this pause causes the kernel to continue booting normally.
There is no error message present when this pause happens, and it occurs also
later in the boot process (after loading NFS for example).
* The pause first happens after the following lines in the kernel log:
[ 1.352116] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.372150] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.372206] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.372270] usb usb7: Product: OHCI Host Controller
[ 1.372323] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.372378] usb usb7: SerialNumber: 0000:00:14.5
[ 1.372490] usb usb7: configuration #1 chosen from 1 choice
[ 1.372567] hub 7-0:1.0: USB hub found
[PAUSE HAPPENS HERE -> I PRESSED SHIFT AFTER ABOUT 12 SECONDS]
[ 14.302853] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 14.302901] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 14.324384] usb 1-2: New USB device found, idVendor=058f, idProduct=6362
[ 14.324442] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 14.324499] usb 1-2: Product: Mass Storage Device
[ 14.324556] usb 1-2: Manufacturer: Generic
[ 14.324608] usb 1-2: SerialNumber: 058F312D81A
[ 14.324732] usb 1-2: configuration #1 chosen from 1 choice
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/vg0-root ro rootdelay=60
** Not tainted
** Kernel log:
[ 79.290926] EDAC amd64_edac: Ver: 3.2.0 Jun 1 2010
[ 79.310435] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 79.310491] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 79.310545] [drm] nouveau 0000:01:00.0: Bios version 60.84.35.00
[ 79.310608] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 79.310672] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 79.310727] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 79.310792] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[ 79.310848] [drm] nouveau 0000:01:00.0: 0: 0x00002030: type 0x30 idx 0 tag 0x08
[ 79.310916] [drm] nouveau 0000:01:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07
[ 79.310989] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 79.311061] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
[ 79.311130] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
[ 79.311194] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[ 79.311251] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[ 79.311306] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 79.311362] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
[ 79.311417] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
[ 79.311478] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBDC4
[ 79.331512] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 79.331656] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 79.331657] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 79.331658] (Note that use of the override may cause unknown side effects.)
[ 79.331872] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 79.354705] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 79.360137] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC0E7
[ 79.360526] 8:3:1: cannot get freq at ep 0x84
[ 79.368241] usbcore: registered new interface driver snd-usb-audio
[ 79.400115] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCB33
[ 79.400188] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCC25
[ 79.404628] CE: hpet increasing min_delta_ns to 15000 nsec
[ 79.408112] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xCE3E
[ 79.408187] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xCEA3
[ 79.432124] [drm] nouveau 0000:01:00.0: 0xCEA3: Condition still not met after 20ms, skipping following opcodes
[ 79.432199] [drm] nouveau 0000:01:00.0: 0xB04E: parsing output script 0
[ 79.432256] [drm] nouveau 0000:01:00.0: 0xB04E: parsing output script 0
[ 79.432311] [drm] nouveau 0000:01:00.0: 0xA6DE: parsing output script 0
[ 79.515104] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7
[ 79.518724] [TTM] Zone kernel: Available graphics memory: 2029712 kiB.
[ 79.518790] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
[ 79.530468] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 79.530921] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 79.537291] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 79.537742] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 79.537798] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 79.537852] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 79.537907] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 79.537961] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 79.538016] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 79.538113] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 79.718141] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88012d918c00
[ 79.722374] [drm] nouveau 0000:01:00.0: 0x0FE3: parsing clock script 0
[ 79.722716] Console: switching to colour frame buffer device 160x64
[ 79.723949] fb0: nouveaufb frame buffer device
[ 79.723956] registered panic notifier
[ 79.723965] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 80.106292] loop: module loaded
[ 80.676052] w1_master_driver w1 bus master: Family 81 for 81.00000027b7ec.16 is not registered.
[ 80.773459] Adding 974840k swap on /dev/dm-2. Priority:-1 extents:1 across:974840k
[ 81.547969] EXT4-fs (dm-5): barriers disabled
[ 81.623126] EXT4-fs (dm-5): mounted filesystem with writeback data mode
[ 81.646216] EXT4-fs (dm-4): barriers disabled
[ 81.647607] EXT4-fs (dm-4): mounted filesystem with writeback data mode
[ 81.679827] EXT4-fs (dm-3): mounted filesystem without journal
[ 81.699149] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[ 93.213330] r8169: eth0: link up
[ 93.213578] r8169: eth0: link up
[ 93.310371] fuse init (API version 7.13)
[ 93.828820] RPC: Registered udp transport module.
[ 93.829090] RPC: Registered tcp transport module.
[ 93.829342] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 93.870636] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 93.978298] svc: failed to register lockdv1 RPC service (errno 97).
[ 93.979146] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 93.989403] NFSD: starting 90-second grace period
[ 106.092606] eth0: no IPv6 routers present
[ 109.706053] powernow-k8: Found 1 AMD Athlon(tm) II X4 630 Processor processors (4 cpu cores) (version 2.20.00)
[ 109.706093] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 109.706094] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 109.706096] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 109.706097] powernow-k8: 3 : pstate 3 (800 MHz)
[ 112.649482] Bluetooth: Core ver 2.15
[ 112.650475] NET: Registered protocol family 31
[ 112.651334] Bluetooth: HCI device and connection manager initialized
[ 112.652179] Bluetooth: HCI socket layer initialized
[ 112.726419] Bluetooth: L2CAP ver 2.14
[ 112.727288] Bluetooth: L2CAP socket layer initialized
[ 112.736214] Bluetooth: RFCOMM TTY layer initialized
[ 112.737092] Bluetooth: RFCOMM socket layer initialized
[ 112.737900] Bluetooth: RFCOMM ver 1.11
[ 112.924721] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 112.925580] Bluetooth: BNEP filters: protocol multicast
[ 112.960025] Bridge firewalling registered
[ 113.129896] Bluetooth: SCO (Voice Link) ver 0.6
[ 113.130766] Bluetooth: SCO socket layer initialized
[ 113.255316] lp0: using parport0 (interrupt-driven).
[ 113.298554] ppdev: user-space parallel port driver
[ 116.736906] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 116.744225] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 322.963731] reportbug[3051] trap divide error ip:7f1a19089c80 sp:7f1a12d6efa0 error:0 in libgtk-x11-2.0.so.0.2000.1[7f1a18f5d000+414000]
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: GA-MA785GM-US2H
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F7
board_vendor: Gigabyte Technology Co., Ltd.
board_name: GA-MA785GM-US2H
board_version: x.x
** Loaded modules:
Module Size Used by
ppdev 5030 0
lp 7462 0
sco 7209 2
bridge 39598 0
stp 1440 1 bridge
bnep 9427 2
rfcomm 29581 0
l2cap 24736 6 bnep,rfcomm
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
rfkill 13044 2 bluetooth
powernow_k8 10978 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
autofs4 20805 2
binfmt_misc 6431 1
nfsd 254118 11
lockd 57603 1 nfsd
nfs_acl 2031 1 nfsd
auth_rpcgss 33460 1 nfsd
sunrpc 161317 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3170 1 nfsd
fuse 50190 1
loop 11783 0
firewire_sbp2 11514 0
snd_hda_codec_realtek 235506 1
snd_hda_intel 19907 1
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_usb_audio 64070 0
snd_usb_lib 13928 1 snd_usb_audio
snd_pcm 60471 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_usb_audio
snd_hwdep 5380 2 snd_hda_codec,snd_usb_audio
snd_seq_midi 4400 0
tpm_tis 7336 0
snd_rawmidi 15515 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
tpm 9917 1 tpm_tis
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15582 2 snd_pcm,snd_seq
nouveau 353136 2
uvcvideo 51743 0
videodev 29993 1 uvcvideo
ttm 39986 1 nouveau
v4l1_compat 11442 2 uvcvideo,videodev
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
v4l2_compat_ioctl32 8538 1 videodev
drm_kms_helper 20065 1 nouveau
snd 46446 14 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_usb_audio,snd_pcm,snd_hwdep,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
drm 142551 4 nouveau,ttm,drm_kms_helper
ds2490 6280 0
ftdi_sio 31996 0
i2c_piix4 8328 0
wire 18478 1 ds2490
i2c_algo_bit 4225 1 nouveau
edac_core 29261 0
tpm_bios 4521 1 tpm
soundcore 4598 1 snd
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
usbserial 27399 1 ftdi_sio
edac_mce_amd 6433 0
cn 4563 1 wire
i2c_core 15712 6 nouveau,videodev,drm_kms_helper,drm,i2c_piix4,i2c_algo_bit
pcspkr 1699 0
evdev 7352 13
button 4650 1 nouveau
processor 30231 1 powernow_k8
parport_pc 18855 1
parport 27954 3 ppdev,lp,parport_pc
ext4 285611 5
mbcache 5050 1 ext4
jbd2 66919 1 ext4
crc16 1319 2 l2cap,ext4
dm_mod 53754 19
raid0 5517 1
raid456 44500 1
async_raid6_recov 5170 1 raid456
async_pq 3479 2 raid456,async_raid6_recov
raid6_pq 77179 2 async_raid6_recov,async_pq
async_xor 2478 3 raid456,async_raid6_recov,async_pq
xor 4380 1 async_xor
async_memcpy 1198 2 raid456,async_raid6_recov
async_tx 1734 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
md_mod 73664 4 raid0,raid456
usbhid 33260 2
hid 62825 1 usbhid
sg 18744 0
sr_mod 12602 0
cdrom 29415 1 sr_mod
sd_mod 29777 15
crc_t10dif 1276 1 sd_mod
firewire_ohci 19468 0
ata_generic 2983 0
firewire_core 36736 2 firewire_sbp2,firewire_ohci
usb_storage 39449 0
ohci_hcd 19212 0
ahci 32358 8
crc_itu_t 1307 1 firewire_core
ehci_hcd 31039 0
aic7xxx 107123 1
pata_atiixp 3489 0
scsi_transport_spi 18774 1 aic7xxx
libata 133520 3 ata_generic,ahci,pata_atiixp
scsi_mod 122117 8 firewire_sbp2,sg,sr_mod,sd_mod,usb_storage,aic7xxx,scsi_transport_spi,libata
r8169 28877 0
mii 3210 1 r8169
thermal 11674 0
thermal_sys 11942 2 processor,thermal
usbcore 121959 13 snd_usb_audio,snd_usb_lib,uvcvideo,ds2490,ftdi_sio,usbserial,usbhid,usb_storage,ohci_hcd,ehci_hcd
nls_base 6361 1 usbcore
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 6c:f0:49:7a:95:da brd ff:ff:ff:ff:ff:ff
inet 192.168.0.1/24 brd 192.168.0.255 scope global eth0
inet6 fe80::6ef0:49ff:fe7a:95da/64 scope link
valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 4e:68:2d:67:d2:d7 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 8756 104 0 0 0 0 0 0 8756 104 0 0 0 0 0 0
eth0: 172927 1263 0 0 0 0 0 0 169478 968 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1390 total packets received
4 with invalid addresses
0 forwarded
0 incoming packets discarded
1386 incoming packets delivered
1030 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
16 active connections openings
166 passive connection openings
6 failed connection attempts
0 connection resets received
0 connections established
1109 segments received
775 segments send out
1 segments retransmited
0 bad segments received.
13 resets sent
Udp:
276 packets received
0 packets to unknown port received.
0 packet receive errors
252 packets sent
UdpLite:
TcpExt:
2 delayed acks sent
21 packets directly queued to recvmsg prequeue.
17306 bytes directly received in process context from prequeue
28 packet headers predicted
12 packets header predicted and directly queued to user
356 acknowledgments not containing data payload received
3 predicted acknowledgments
1 other TCP timeouts
1 connections reset due to unexpected data
IpExt:
InMcastPkts: 13
OutMcastPkts: 15
InBcastPkts: 80
OutBcastPkts: 54
InOctets: 172158
OutOctets: 160476
InMcastOctets: 2572
OutMcastOctets: 2652
InBcastOctets: 9585
OutBcastOctets: 7609
*** Device features:
eth0: 0x180
lo: 0x13865
pan0: 0xff3865
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
Subsystem: Giga-byte Technology Device [1458:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fa00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [GeForce 8600 GT] [10de:0402] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:3452]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at ef00 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at fdf00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:07.0 SCSI storage controller [0100]: Adaptec AIC-7892A U160/m [9005:0080] (rev 02)
Subsystem: Adaptec 29160N Ultra160 SCSI Controller [9005:62a0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (10000ns min, 6250ns max)
Interrupt: pin A routed to IRQ 21
BIST result: 00
Region 0: I/O ports at ce00 [disabled] [size=256]
Region 1: Memory at fdeff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdd00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
03:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdefe000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 004 Device 002: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse
Bus 003 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 008: ID 0c45:62e0 Microdia MSI Starcam Racer
Bus 001 Device 005: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
--- End Message ---