Bug#673588: linux-image-3.2.0-2-686-pae: Elantech touchpad detected as PS2 mouse
Package: linux-2.6
Version: 3.2.16-1
Severity: normal
Tags: upstream
Hi,
I'm running linux-image-3.2.0-2-686-pae version 3.2.16-1 on debian wheezy. I
unsuccessfully tried version 3.2.17-1 from sid. The laptop is a Fujitsu Siemens
Amilo pi2515. My /proc/bus/input/devices says:
[...]
I: Bus=0011 Vendor=0002 Product=0001 Version=0063
N: Name="PS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input7
U: Uniq=
H: Handlers=mouse0 event7
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
[...]
Any hint?
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.16-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 SMP Mon Apr 30 05:59:35 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=ce754bd4-1e36-4c3a-9343-dfa48ae2e393 ro quiet splash
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 3245.820683] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040a)
[ 3245.820698] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
[ 3245.820704] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00)
[ 3245.820711] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[ 3245.820722] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 3245.820730] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 3245.820796] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3245.820822] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 3245.820852] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3245.820878] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 3245.820908] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3245.820933] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 3245.820973] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 3245.820993] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 3245.821000] ehci_hcd 0000:00:1d.7: PME# disabled
[ 3245.821022] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 3245.821028] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 3245.821034] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[ 3245.821048] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107)
[ 3245.821101] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
[ 3245.821122] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[ 3245.821149] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 3245.821173] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[ 3245.821200] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 3245.821255] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x80000000)
[ 3245.821335] iwl3945 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 3245.821404] iwl3945 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000)
[ 3245.821418] iwl3945 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 3245.821438] iwl3945 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
[ 3245.821586] r8169 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 3245.821613] r8169 0000:06:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xfa000004)
[ 3245.821623] r8169 0000:06:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001)
[ 3245.821631] r8169 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 3245.821642] r8169 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100507)
[ 3245.821814] PM: early resume of devices complete after 1.710 msecs
[ 3245.821886] i915 0000:00:02.0: setting latency timer to 64
[ 3245.821931] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3245.821943] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3245.822073] usb usb3: root hub lost power or was reset
[ 3245.822113] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3245.822227] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3245.822534] usb usb4: root hub lost power or was reset
[ 3245.822613] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3245.822765] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3245.822996] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3245.823111] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3245.824207] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 3245.825245] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
[ 3245.825475] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[ 3245.825668] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[ 3245.825708] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3245.825860] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3245.826168] usb usb5: root hub lost power or was reset
[ 3245.826207] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3245.826321] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3245.826514] usb usb6: root hub lost power or was reset
[ 3245.826553] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3245.826783] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3245.826923] usb usb7: root hub lost power or was reset
[ 3245.826938] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3245.826946] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3245.826975] pci 0000:00:1e.0: setting latency timer to 64
[ 3245.826987] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3245.826992] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3245.827015] ahci 0000:00:1f.2: setting latency timer to 64
[ 3245.827086] pci 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 3245.827111] r8169 0000:06:00.0: wake-up capability disabled by ACPI
[ 3245.827119] r8169 0000:06:00.0: PME# disabled
[ 3245.828321] sd 0:0:0:0: [sda] Starting disk
[ 3246.040408] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 3246.040413] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 3246.144029] ata2: SATA link down (SStatus 0 SControl 300)
[ 3246.148037] ata3: SATA link down (SStatus 0 SControl 300)
[ 3246.168286] ata4.00: configured for UDMA/33
[ 3246.932032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3246.937056] ata1.00: unexpected _GTF length (8)
[ 3246.939278] ata1.00: unexpected _GTF length (8)
[ 3246.939632] ata1.00: configured for UDMA/133
[ 3247.015546] PM: resume of devices complete after 1193.690 msecs
[ 3247.015713] PM: Finishing wakeup.
[ 3247.015715] Restarting tasks ... done.
[ 3247.016333] video LNXVIDEO:00: Restoring backlight state
[ 3248.370219] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3248.373771] r8169 0000:06:00.0: eth0: link down
[ 3248.373999] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3256.678968] wlan0: authenticate with 00:12:17:bc:d1:8b (try 1)
[ 3256.680773] wlan0: authenticated
[ 3256.681135] wlan0: associate with 00:12:17:bc:d1:8b (try 1)
[ 3256.683549] wlan0: RX AssocResp from 00:12:17:bc:d1:8b (capab=0x411 status=0 aid=2)
[ 3256.683557] wlan0: associated
[ 3256.685308] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3257.639833] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 3267.472019] wlan0: no IPv6 routers present
[ 6835.525370] Netfilter messages via NETLINK v0.30.
[ 7008.464048] device wlan0 entered promiscuous mode
[ 7257.790686] device wlan0 left promiscuous mode
[ 7395.720843] device wlan0 entered promiscuous mode
[ 7401.097911] device wlan0 left promiscuous mode
[ 7725.876076] device wlan0 entered promiscuous mode
[ 9476.111946] device wlan0 left promiscuous mode
** Model information
not available
** Loaded modules:
nfnetlink_log
nfnetlink
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
pci_stub
snd_hrtimer
cryptd
aes_i586
aes_generic
acpi_cpufreq
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
binfmt_misc
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
kvm_intel
kvm
loop
snd_hda_codec_realtek
arc4
sr_mod
cdrom
snd_hda_codec_si3054
iwl3945
iwl_legacy
snd_hda_intel
mac80211
snd_hda_codec
ata_generic
snd_hwdep
snd_pcm_oss
uhci_hcd
cfg80211
snd_mixer_oss
ata_piix
snd_pcm
ehci_hcd
usbcore
r8169
rfkill
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
mii
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
snd
iTCO_wdt
pcspkr
battery
processor
ac
iTCO_vendor_support
soundcore
i2c_i801
power_supply
psmouse
usb_common
serio_raw
evdev
ext4
crc16
jbd2
mbcache
sd_mod
crc_t10dif
i915
ahci
libahci
libata
i2c_algo_bit
drm_kms_helper
drm
scsi_mod
video
thermal
button
i2c_core
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc404800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc404c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 1c00 [size=8]
Region 1: I/O ports at 18d4 [size=4]
Region 2: I/O ports at 18d8 [size=8]
Region 3: I/O ports at 18d0 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at fc404000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c20 [size=32]
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001]
Physical Slot: 4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
Subsystem: Fujitsu Technology Solutions Device [1734:1108]
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at fa000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.43
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-32
Versions of packages linux-image-3.2.0-2-686-pae suggests:
pn extlinux 2:4.05+dfsg-2
pn grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi 0.35
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
* linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
Reply to: