[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#672602: marked as done (does not hibernate on Lenovo ThinkPad x220i)



Your message dated Thu, 17 May 2012 12:10:45 -0500
with message-id <20120517171045.GB13901@burratino>
and subject line Re: does not hibernate on Lenovo ThinkPad x220i
has caused the Debian Bug report #672602,
regarding does not hibernate on Lenovo ThinkPad x220i
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
672602: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=672602
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 3.2.16-1
Severity: normal

Both on Wheezy and Squeeze (kernel from backports) hibernate (e.g. by
pressing the Fn-F12 button or by using the hibernate button in XFCE),
the screen gets dark and the computer does something, but it does not
switch off. After some minutes, I get impatient and switch it off, so
it does a normal reboot afterwards.

How can I debug the hibernation process? Are there any log messages to
look for?

-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.16-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 SMP Mon Apr 30 05:59:35 UTC 2012

** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=/dev/mapper/ohno-root ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[  108.172046] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[  108.173197] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[  108.214722] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[  108.354413] Linux media interface: v0.10
[  108.513638] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[  108.529730] Linux video capture interface: v2.00
[  108.622650] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[  108.625526] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
[  108.625616] usbcore: registered new interface driver uvcvideo
[  108.625619] USB Video Class driver (1.1.1)
[  108.766492] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[  108.766658] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[  108.766831] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[  108.767009] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[  108.767116] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[  108.767213] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[  108.767640] i915 0000:00:02.0: power state changed by ACPI to D0
[  108.767648] i915 0000:00:02.0: power state changed by ACPI to D0
[  108.767657] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  108.767663] i915 0000:00:02.0: setting latency timer to 64
[  108.788200] mtrr: no more MTRRs available
[  108.788203] [drm] MTRR allocation failed.  Graphics performance may suffer.
[  108.788535] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[  108.788540] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[  108.788542] [drm] Driver supports precise vblank timestamp query.
[  108.788576] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[  108.935997] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[  108.936477] Registered led device: phy0-led
[  109.035719] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[  109.535412] cfg80211: World regulatory domain updated:
[  109.535416] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  109.535419] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  109.535422] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  109.535424] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  109.535427] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  109.535429] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  109.731020] fbcon: inteldrmfb (fb0) is primary device
[  109.918581] Console: switching to colour frame buffer device 170x48
[  109.922535] fb0: inteldrmfb frame buffer device
[  109.922537] drm: registered panic notifier
[  109.940580] acpi device:01: registered as cooling_device4
[  109.940767] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[  109.940841] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[  109.940926] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[  110.979519] EXT4-fs (dm-1): re-mounted. Opts: (null)
[  111.254131] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[  111.561481] loop: module loaded
[  112.544965] Adding 12673020k swap on /dev/mapper/ohno-swap_1.  Priority:-1 extents:1 across:12673020k 
[  112.818142] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  114.088993] RPC: Registered named UNIX socket transport module.
[  114.088996] RPC: Registered udp transport module.
[  114.088997] RPC: Registered tcp transport module.
[  114.088999] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  114.140342] FS-Cache: Loaded
[  114.188479] FS-Cache: Netfs 'nfs' registered for caching
[  114.206802] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  114.727327] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[  114.980937] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
[  115.810214] fuse init (API version 7.17)
[  119.810645] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[  119.866474] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[  119.866631] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  119.868537] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  119.868735] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  120.158280] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  120.158486] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  120.286708] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  124.682534] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[  125.477812] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  125.477815] Bluetooth: BNEP filters: protocol multicast
[  125.506028] Bluetooth: RFCOMM TTY layer initialized
[  125.506034] Bluetooth: RFCOMM socket layer initialized
[  125.506037] Bluetooth: RFCOMM ver 1.11
[  126.148187] lp: driver loaded but no devices found
[  126.267851] ppdev: user-space parallel port driver
[  127.788391] wlan0: authenticate with bc:05:43:7f:24:3f (try 1)
[  127.791779] wlan0: authenticated
[  127.792128] wlan0: associate with bc:05:43:7f:24:3f (try 1)
[  127.796886] wlan0: RX AssocResp from bc:05:43:7f:24:3f (capab=0x431 status=0 aid=1)
[  127.796896] wlan0: associated
[  127.801401] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  127.801452] cfg80211: Calling CRDA for country: DE
[  127.805296] cfg80211: Regulatory domain changed to country: DE
[  127.805299] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  127.805302] cfg80211:     (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  127.805305] cfg80211:     (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  127.805307] cfg80211:     (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  127.805309] cfg80211:     (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[  134.101425] iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = bc:05:43:7f:24:3f tid = 0
[  138.363415] thinkpad_ec: thinkpad_ec 0.41 loaded.
[  138.371879] hdaps: LENOVO ThinkPad X220 detected, setting orientation 4
[  138.371987] hdaps: initial mode latch is 0x05
[  138.372117] hdaps: setting ec_rate=250, filter_order=2
[  138.372336] hdaps: device successfully initialized.
[  138.372428] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input15
[  138.372629] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input16
[  138.372733] hdaps: driver successfully loaded.
[  139.110369] wlan0: no IPv6 routers present
[ 5461.822582] tun: Universal TUN/TAP device driver, 1.6
[ 5461.822586] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

** Model information
not available

** Loaded modules:
tun
acpi_cpufreq
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
hdaps(O)
thinkpad_ec(O)
parport_pc
ppdev
lp
parport
rfcomm
bnep
binfmt_misc
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
arc4
snd_hda_codec_hdmi
uvcvideo
videodev
snd_hda_codec_conexant
joydev
media
thinkpad_acpi
nvram
btusb
iwlwifi
bluetooth
mac80211
cfg80211
i915
drm_kms_helper
drm
snd_hda_intel
i2c_algo_bit
snd_hda_codec
rfkill
snd_hwdep
snd_pcm
snd_page_alloc
tpm_tis
iTCO_wdt
snd_seq
snd_seq_device
i2c_i801
tpm
tpm_bios
ac
battery
i2c_core
power_supply
snd_timer
pcspkr
iTCO_vendor_support
wmi
snd
psmouse
video
button
soundcore
serio_raw
evdev
processor
ext4
crc16
jbd2
mbcache
sha256_generic
cryptd
aes_i586
aes_generic
cbc
dm_crypt
dm_mod
sd_mod
crc_t10dif
ehci_hcd
thermal
thermal_sys
ahci
libahci
libata
usbcore
sdhci_pci
sdhci
mmc_core
scsi_mod
e1000e
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 5000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f2525000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f252b000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 5080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f252a000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at f2520000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f2400000-f24fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: f1c00000-f23fffff
	Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f1400000-f1bfffff
	Prefetchable memory behind bridge: 00000000f0c00000-00000000f13fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f2529000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 41
	Region 0: I/O ports at 50a8 [size=8]
	Region 1: I/O ports at 50bc [size=4]
	Region 2: I/O ports at 50a0 [size=8]
	Region 3: I/O ports at 50b8 [size=4]
	Region 4: I/O ports at 5060 [size=32]
	Region 5: Memory at f2528000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f2524000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at efa0 [size=32]
	Kernel driver in use: i801_smbus

03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0085] (rev 34)
	Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi

0d:00.0 System peripheral [0880]: Ricoh Co Ltd Device [1180:e823] (rev 07) (prog-if 01)
	Subsystem: Lenovo Device [17aa:21da]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f1400000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller
Bus 001 Device 005: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/4 CPU cores)
Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.42
ii  initramfs-tools [linux-initramfs-tool]  0.102
ii  kmod                                    6-2
ii  linux-base                              3.5
ii  module-init-tools                       6-2

Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii  firmware-linux-free  3
ii  libc6-i686           2.13-32

Versions of packages linux-image-3.2.0-2-686-pae suggests:
pn  grub-pc        1.99-21
pn  linux-doc-3.2  <none>

Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        0.35
pn  firmware-libertas       <none>
pn  firmware-linux          0.35
pn  firmware-linux-nonfree  0.35
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true
  linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false
  linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
  linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:



--- End Message ---
--- Begin Message ---
Version: 3.2.17-1

W. Martin Borgert wrote:

> 3.2.17 solved the hibernation problem indeed.

Thanks for testing.  Marking accordingly.


--- End Message ---

Reply to: