Bug#673186: linux-image-3.2.0-2-686-pae: No support for DWA-140 rev.3 wireless (2001:3c15)
Package: linux-2.6
Version: 3.2.17-1
Severity: normal
Dear Maintainer,
I've recently bought DWA-140 dongle, expecting it to work
out-of-the-box. But I've
omitted a fact that there are several revisions of DWA-140, with completely
different hardware. So mine is DWA-140 rev.3, which is initially not
working in Debian.
What have I done:
1. Inserted dongle.
2. Nothing interesting happened.
3. Searched web for the first time.
4. Tried the following solutions:
a) modprobe rt2800usb
Effect: no effect, some dmesg general 80211 messages
b) echo "2001 3c15" > /sys/bus/usb/drivers/rt2800/new_id
Effect: incorrect ID or similar message appeared in dmesg.
c) used several versions of /lib/firmware/.../rt2870.bin
Effect: no effect
d) tried 2.6.32 from stable and 3.3 from experimental
What actually worked was compiling Ralink drivers to get rt5370sta. That module
is functional, but not present in Debian.
Debian and internet suggest that correct module for such card (and
others) should be
rt2800usb. In fact, rt2800 sources:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=tree;f=drivers/net/wireless/rt2x00;h=bae2683595b9dd0906c26117a856e0938d909c0b;hb=HEAD
contain 2001:3c15 USB ID. It should be visible with the following
Debian settings:
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT53XX=y
Unless "# CONFIG_RT2800USB_UNKNOWN is not set " is needed.
Debian rt2800usb doesn't contain 2001 3c15 (checked with modinfo).
Could you please check:
1. If such model can be enabled by some additional define in Linux kernel?
2. There's additional way to use that device (Debian way, not my
custom kernel ralink driver)?
Additional sources:
1. Ubuntu hardware support page
https://help.ubuntu.com/community/HardwareSupportComponentsWirelessNetworkCardsDlink
2. Google search for 2001:3c15, linux, DWA-140, Ubuntu, Debian, ralink
3. Ralink webpage http://www.ralinktech.com/en/04_support/support.php?sn=501
I'm filing this bug as I can't see any other relevant in BTS, so
others may benefit.
Thank you for your time.
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.17-1)
(debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) )
#1 SMP Sun May 13 07:51:23 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae
root=UUID=e07cdee0-3fec-4d9f-9936-75655ff99f31 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 22.936824] RTMP_TimerListAdd: add timer obj f86c76c8!
[ 22.938244] -->RTUSBVenderReset
[ 22.938370] <--RTUSBVenderReset
[ 23.429368] 1. Phy Mode = 0
[ 23.429369] 2. Phy Mode = 0
[ 23.429370] NVM is Efuse and its size =2d[2d0-2fc]
[ 23.478931] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 23.500653] 3. Phy Mode = 0
[ 23.503150] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 23.503151] \x1b[mRTMPSetPhyMode: channel is out of range, use
first channel=1
[ 23.539856] MCS Set = 00 00 00 00 00
[ 23.550392] <==== rt28xx_init, Status=0
[ 23.551838] 0x1300 = 000a4200
[ 24.036713] ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 348
[ 28.852066] r8169 0000:02:00.0: eth0: link down
[ 28.852138] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.104017] ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2171
[ 33.481950] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 33.740048] RTMP_TimerListAdd: add timer obj f86fcb70!
[ 33.740050] RTMP_TimerListAdd: add timer obj f86fcbb8!
[ 33.740051] RTMP_TimerListAdd: add timer obj f86fcc00!
[ 33.740052] RTMP_TimerListAdd: add timer obj f86fcb28!
[ 33.740053] RTMP_TimerListAdd: add timer obj f86fca50!
[ 33.740054] RTMP_TimerListAdd: add timer obj f86fca98!
[ 33.740055] RTMP_TimerListAdd: add timer obj f86c7628!
[ 33.740056] RTMP_TimerListAdd: add timer obj f86b6ef0!
[ 33.740057] RTMP_TimerListAdd: add timer obj f86b6f40!
[ 33.740058] RTMP_TimerListAdd: add timer obj f86c7714!
[ 33.740059] RTMP_TimerListAdd: add timer obj f86c7598!
[ 33.740060] RTMP_TimerListAdd: add timer obj f86c76c8!
[ 33.741472] -->RTUSBVenderReset
[ 33.741596] <--RTUSBVenderReset
[ 34.219757] 1. Phy Mode = 0
[ 34.219759] 2. Phy Mode = 0
[ 34.219760] NVM is Efuse and its size =2d[2d0-2fc]
[ 34.269425] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 34.291147] 3. Phy Mode = 0
[ 34.293643] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 34.293644] \x1b[mMCS Set = 00 00 00 00 00
[ 34.340760] <==== rt28xx_init, Status=0
[ 34.342206] 0x1300 = 000a4200
[ 34.724619] r8169 0000:02:00.0: eth0: link down
[ 34.724683] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.137099] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 35.395196] RTMP_TimerListAdd: add timer obj f86fcb70!
[ 35.395198] RTMP_TimerListAdd: add timer obj f86fcbb8!
[ 35.395199] RTMP_TimerListAdd: add timer obj f86fcc00!
[ 35.395200] RTMP_TimerListAdd: add timer obj f86fcb28!
[ 35.395201] RTMP_TimerListAdd: add timer obj f86fca50!
[ 35.395202] RTMP_TimerListAdd: add timer obj f86fca98!
[ 35.395203] RTMP_TimerListAdd: add timer obj f86c7628!
[ 35.395204] RTMP_TimerListAdd: add timer obj f86b6ef0!
[ 35.395205] RTMP_TimerListAdd: add timer obj f86b6f40!
[ 35.395206] RTMP_TimerListAdd: add timer obj f86c7714!
[ 35.395207] RTMP_TimerListAdd: add timer obj f86c7598!
[ 35.395208] RTMP_TimerListAdd: add timer obj f86c76c8!
[ 35.396612] -->RTUSBVenderReset
[ 35.396736] <--RTUSBVenderReset
[ 35.875022] 1. Phy Mode = 0
[ 35.875023] 2. Phy Mode = 0
[ 35.875024] NVM is Efuse and its size =2d[2d0-2fc]
[ 35.924690] (Efuse for 3062/3562/3572) Size=0x2d [2d0-2fc]
[ 35.946411] 3. Phy Mode = 0
[ 35.948908] \x1b[mAntCfgInit: primary/secondary ant 0/1
[ 35.948909] \x1b[mMCS Set = 00 00 00 00 00
[ 35.996026] <==== rt28xx_init, Status=0
[ 35.997471] 0x1300 = 000a4200
[ 38.218265] /tmp/2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO/os/linux/../../common/cmm_asic.c:3069
assert KeyIdx < 4failed
[ 38.218889] /tmp/2011_0719_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2.5.0.3_DPO/os/linux/../../common/cmm_asic.c:3069
assert KeyIdx < 4failed
[ 38.231360] ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=11)
[ 40.340767] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1685
[ 40.340875] ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=11)
[ 46.189077] ra0: no IPv6 routers present
[ 121.840111] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 121.893732] ISO 9660 Extensions: RRIP_1991A
[ 731.290457] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
[ 731.383843] usb 2-1.1: New USB device found, idVendor=06bc, idProduct=0083
[ 731.383846] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 731.383848] usb 2-1.1: Product: USB Device
[ 731.383849] usb 2-1.1: Manufacturer: OKI DATA CORP
[ 731.465507] usblp0: USB Bidirectional printer dev 3 if 0 alt 0
proto 2 vid 0x06BC pid 0x0083
[ 731.465517] usbcore: registered new interface driver usblp
[ 768.910915] usblp0: removed
[ 768.912327] usblp0: USB Bidirectional printer dev 3 if 0 alt 0
proto 2 vid 0x06BC pid 0x0083
[ 771.750470] usblp0: removed
[ 771.752057] usblp0: USB Bidirectional printer dev 3 if 0 alt 0
proto 2 vid 0x06BC pid 0x0083
[ 860.846163] usblp0: removed
[ 870.222598] usblp0: USB Bidirectional printer dev 3 if 0 alt 0
proto 2 vid 0x06BC pid 0x0083
[ 936.853583] usblp0: removed
[ 945.128460] usblp0: USB Bidirectional printer dev 3 if 0 alt 0
proto 2 vid 0x06BC pid 0x0083
[ 1024.454198] usblp0: removed
[ 1033.040654] usblp0: USB Bidirectional printer dev 3 if 0 alt 0
proto 2 vid 0x06BC pid 0x0083
[ 1058.506964] usblp0: removed
[ 1067.417385] usblp0: USB Bidirectional printer dev 3 if 0 alt 0
proto 2 vid 0x06BC pid 0x0083
[ 1095.024314] usblp0: removed
[ 1103.555930] usblp0: USB Bidirectional printer dev 3 if 0 alt 0
proto 2 vid 0x06BC pid 0x0083
[ 1118.270664] usblp0: removed
[ 1127.177903] usblp0: USB Bidirectional printer dev 3 if 0 alt 0
proto 2 vid 0x06BC pid 0x0083
[ 1165.344219] usb 2-1.1: USB disconnect, device number 3
[ 1165.344344] usblp0: removed
** Model information
not available
** Loaded modules:
usblp
nls_utf8
isofs
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
rfkill
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
it87
hwmon_vid
coretemp
adm1021
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
i915
snd_seq
snd_seq_device
snd_timer
snd
video
rt5370sta(O)
pcspkr
drm_kms_helper
drm
i2c_algo_bit
mxm_wmi
i2c_i801
soundcore
i2c_core
evdev
iTCO_wdt
wmi
iTCO_vendor_support
processor
button
thermal_sys
ext4
crc16
jbd2
mbcache
usbhid
hid
sr_mod
sd_mod
cdrom
crc_t10dif
xhci_hcd
ata_generic
ata_piix
ehci_hcd
r8169
mii
libata
usbcore
scsi_mod
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core
Processor Family DRAM Controller [8086:0100] (rev 09)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd
Generation Core Processor Family Integrated Graphics Controller
[8086:0112] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fb800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ff00 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6
Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev
04)
Subsystem: Giga-byte Technology Device [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 12
Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
(prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series
Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfa00000-dfbfffff
Prefetchable memory behind bridge: 00000000dfc00000-00000000dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000fbe00000-00000000fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) (prog-if
00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
(prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Z68 Express Chipset
Family LPC Controller [8086:1c44] (rev 05)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 6 Series/C200 Series
Chipset Family 4 port SATA IDE Controller [8086:1c00] (rev 05)
(prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fd00 [size=4]
Region 2: I/O ports at fc00 [size=8]
Region 3: I/O ports at fb00 [size=4]
Region 4: I/O ports at fa00 [size=16]
Region 5: I/O ports at f900 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset
Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 6 Series/C200 Series
Chipset Family 2 port SATA IDE Controller [8086:1c08] (rev 05)
(prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f700 [size=8]
Region 1: I/O ports at f600 [size=4]
Region 2: I/O ports at f500 [size=8]
Region 3: I/O ports at f400 [size=4]
Region 4: I/O ports at f300 [size=16]
Region 5: I/O ports at f200 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
06)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
[1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fbeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbef8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0
Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI])
Subsystem: Giga-byte Technology Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at fbdf8000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 2001:3c15 D-Link Corp.
Bus 001 Device 004: ID 1241:1166 Belkin MI-2150 Trust Mouse
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.43
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 8-1
ii linux-base 3.5
ii module-init-tools 8-1
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-32
Versions of packages linux-image-3.2.0-2-686-pae suggests:
pn grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink 0.35
pn firmware-realtek 0.35
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae:
true
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae:
false
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
* linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
Reply to: