Your message dated Sat, 05 May 2012 04:05:02 +0100 with message-id <1336187102.8274.150.camel@deadeye> and subject line Re: Bug#648751: linux-image-3.0.0-1-rt-amd64: rcu_preempt_state whileshutdown has caused the Debian Bug report #648751, regarding linux-image-3.0.0-1-rt-amd64: rcu_preempt_state while shutdown to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 648751: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=648751 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.0.0-1-rt-amd64: rcu_preempt_state while shutdown
- From: Flavio Silveira <fggs@terra.com.br>
- Date: Mon, 14 Nov 2011 16:57:57 -0200
- Message-id: <20111114185757.8970.33552.reportbug@localhost>
Package: linux-2.6 Version: 3.0.0-3 Severity: normal Tags: upstream Dear Maintainer, When I shutdown my laptop I get errors like "rcu_preempt_state stalled on CPU 1" after "Will now halt." message and I can only shutdown if I hold power button. This doesn't happen with kernel 2.6.32-5 from Squeeze. I'll attach a photo later on. Useful info: Dell Vostro 3450, i5 2,3GHz, 4GB of ram (single stick), 500GB of hdd. Debian wheezy -- Package-specific info: ** Version: Linux version 3.0.0-1-rt-amd64 (Debian 3.0.0-3) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 SMP PREEMPT RT Sat Aug 27 17:34:31 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-rt-amd64 root=UUID=a7685bc5-e1c1-4864-be73-1a0778773ac6 ro quiet ** Not tainted ** Kernel log: [ 7.949667] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 7.950424] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 7.951448] ACPI: Sleep Button [SLPB] [ 7.952189] [drm] Loading TURKS Microcode [ 7.953058] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 7.953943] ACPI: Lid Switch [LID0] [ 7.954096] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 7.954197] ACPI: Power Button [PWRF] [ 7.957385] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.957389] i915 0000:00:02.0: setting latency timer to 64 [ 8.083465] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 8.083613] usbcore: registered new interface driver btusb [ 8.123582] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.123598] ath9k 0000:02:00.0: setting latency timer to 64 [ 8.140583] input: Dell WMI hotkeys as /devices/virtual/input/input6 [ 8.150587] Linux media interface: v0.10 [ 8.175817] ath: EEPROM regdomain: 0x60 [ 8.175818] ath: EEPROM indicates we should expect a direct regpair map [ 8.175821] ath: Country alpha2 being used: 00 [ 8.175822] ath: Regpair used: 0x60 [ 8.226258] Linux video capture interface: v2.00 [ 8.240355] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (1bcf:2b81) [ 8.262815] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7 [ 8.262935] usbcore: registered new interface driver uvcvideo [ 8.262937] USB Video Class driver (v1.1.0) [ 8.269516] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 8.325168] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 8.326680] Registered led device: ath9k-phy0 [ 8.326687] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900053a0000, irq=16 [ 8.385367] ath3k_probe: Error loading firmware [ 8.385388] ath3k: probe of 4-1.5:1.0 failed with error -5 [ 8.385842] usbcore: registered new interface driver ath3k [ 8.423237] radeon 0000:01:00.0: WB enabled [ 8.439784] [drm] ring test succeeded in 3 usecs [ 8.440114] [drm] radeon: ib pool ready. [ 8.440313] [drm] ib test succeeded in 0 usecs [ 8.442835] [drm] Radeon Display Connectors [ 8.442853] [drm] Internal thermal controller without fan control [ 8.443821] [drm] radeon: power management initialized [ 8.444060] No connectors reported connected with modes [ 8.444062] [drm] Cannot find any crtc or sizes - going 1024x768 [ 8.446451] [drm] fb mappable at 0xC0141000 [ 8.446452] [drm] vram apper at 0xC0000000 [ 8.446453] [drm] size 3145728 [ 8.446454] [drm] fb depth is 24 [ 8.446455] [drm] pitch is 4096 [ 8.449527] Console: switching to colour frame buffer device 128x48 [ 8.452036] fb0: radeondrmfb frame buffer device [ 8.452038] drm: registered panic notifier [ 8.452045] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0 [ 8.540572] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 8.540580] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.540582] [drm] Driver supports precise vblank timestamp query. [ 8.547341] vga_switcheroo: enabled [ 8.547454] radeon atpx: version is 1 [ 8.547503] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 8.547507] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.737137] fbcon: inteldrmfb (fb1) is primary device [ 8.737140] fbcon: Remapping primary device, fb1, to tty 1-63 [ 9.014025] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0x8a0400 [ 9.057279] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 9.077201] fb1: inteldrmfb frame buffer device [ 9.077822] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 9.101072] acpi device:29: registered as cooling_device4 [ 9.102462] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:27/LNXVIDEO:00/input/input9 [ 9.102739] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 9.106077] acpi device:31: registered as cooling_device5 [ 9.106798] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10 [ 9.106981] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 9.107082] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1 [ 9.107156] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.107272] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 9.107388] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.665832] hda_codec: ALC269VB: BIOS auto-probing. [ 9.666574] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 9.673187] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0 [ 9.675820] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 9.675939] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.676056] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 10.119222] Adding 5174268k swap on /dev/sda6. Priority:-1 extents:1 across:5174268k [ 10.308884] EXT3-fs (sda5): using internal journal [ 10.417301] loop: module loaded [ 11.084904] EXT3-fs: barriers not enabled [ 11.085421] kjournald starting. Commit interval 5 seconds [ 11.085901] EXT3-fs (sda7): using internal journal [ 11.085935] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 11.528900] fuse init (API version 7.16) [ 145.047032] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 146.200795] wlan0: authenticate with 00:1c:10:3a:ff:0a (try 1) [ 146.202895] wlan0: authenticated [ 146.232644] wlan0: associate with 00:1c:10:3a:ff:0a (try 1) [ 146.236742] wlan0: RX AssocResp from 00:1c:10:3a:ff:0a (capab=0x431 status=0 aid=4) [ 146.236746] wlan0: associated [ 146.237162] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 146.282545] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 146.304278] padlock_aes: VIA PadLock not detected. [ 156.294647] wlan0: no IPv6 routers present [ 1052.855040] exe (7691): /proc/7691/oom_adj is deprecated, please use /proc/7691/oom_score_adj instead. [ 6542.294497] dell_wmi: Unknown key 3a pressed [ 6543.312924] dell_wmi: Unknown key 3a pressed ** Model information sys_vendor: Dell Inc. product_name: Dell System Vostro 3450 product_version: chassis_vendor: Dell Inc. chassis_version: 0.1 bios_vendor: Dell Inc. bios_version: A07 board_vendor: Dell Inc. board_name: 0GG0VM board_version: A01 ** Loaded modules: Module Size Used by aesni_intel 50594 2 cryptd 14601 1 aesni_intel aes_x86_64 16796 1 aesni_intel aes_generic 33026 2 aesni_intel,aes_x86_64 fuse 66275 1 loop 22666 0 snd_hda_codec_hdmi 26321 1 snd_hda_codec_realtek 278027 1 joydev 17186 0 arc4 12458 2 ath3k 12671 0 snd_hda_intel 26140 0 snd_hda_codec 72735 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel uvcvideo 61887 0 videodev 66729 1 uvcvideo psmouse 55614 0 snd_hwdep 13194 1 snd_hda_codec snd_pcm 67907 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq 45182 0 media 18200 2 uvcvideo,videodev dell_wmi 12477 0 dell_laptop 12943 0 snd_timer 22549 2 snd_pcm,snd_seq ath9k 77083 0 mac80211 186805 1 ath9k ath9k_common 12682 1 ath9k btusb 17462 0 ath9k_hw 261156 2 ath9k,ath9k_common i915 347327 2 bluetooth 118309 1 btusb sparse_keymap 12795 1 dell_wmi crc16 12343 1 bluetooth ath 21453 2 ath9k,ath9k_hw v4l2_compat_ioctl32 16531 1 videodev pcspkr 12579 0 evdev 17482 17 dcdbas 13256 1 dell_laptop snd_seq_device 13137 1 snd_seq processor 27994 4 serio_raw 12846 0 battery 13109 0 radeon 652720 0 cfg80211 136660 3 ath9k,mac80211,ath i2c_i801 16870 0 ttm 52802 1 radeon rfkill 19040 3 dell_laptop,bluetooth,cfg80211 drm_kms_helper 27216 2 radeon,i915 drm 167542 5 radeon,i915,ttm,drm_kms_helper button 12930 1 i915 wmi 13243 1 dell_wmi i2c_algo_bit 12850 2 radeon,i915 snd 52898 9 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 13204 1 snd snd_page_alloc 13043 2 snd_hda_intel,snd_pcm ac 12624 0 power_supply 13475 4 dell_laptop,battery,radeon,ac i2c_core 23961 7 videodev,i915,radeon,i2c_i801,drm_kms_helper,drm,i2c_algo_bit video 17707 1 i915 ext3 114236 2 jbd 47336 1 ext3 mbcache 13066 1 ext3 sg 25946 0 ums_realtek 12750 0 sd_mod 36173 4 sr_mod 21811 0 usb_storage 47908 1 ums_realtek crc_t10dif 12348 1 sd_mod cdrom 35057 1 sr_mod uas 13299 0 ahci 25089 3 libahci 22767 1 ahci libata 149011 2 ahci,libahci scsi_mod 166720 6 sg,sd_mod,sr_mod,usb_storage,uas,libata r8169 42331 0 mii 12675 1 r8169 xhci_hcd 68221 0 thermal 17426 0 thermal_sys 17949 3 processor,video,thermal ehci_hcd 40050 0 usbcore 128195 9 ath3k,uvcvideo,btusb,ums_realtek,usb_storage,uas,xhci_hcd,ehci_hcd ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Dell Device [1028:04c5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: e1700000-e17fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:04c5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 49 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 5000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Dell Device [1028:04c5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e1805000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:04c5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e180a000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: Dell Device [1028:04c5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 50 Region 0: Memory at e1800000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e1600000-e16fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: e1500000-e15fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Prefetchable memory behind bridge: 00000000e0400000-00000000e04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=09, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e0d00000-e14fffff Prefetchable memory behind bridge: 00000000e0500000-00000000e0cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:04c5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e1809000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05) Subsystem: Dell Device [1028:04c5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device [1028:04c5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 47 Region 0: I/O ports at 5088 [size=8] Region 1: I/O ports at 5094 [size=4] Region 2: I/O ports at 5080 [size=8] Region 3: I/O ports at 5090 [size=4] Region 4: I/O ports at 5060 [size=32] Region 5: Memory at e1808000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: Dell Device [1028:04c5] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at e1804000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] [1002:6741] (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:04c5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at e1700000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at 4000 [size=256] Expansion ROM at e1720000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Dell Device [1028:0205] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e1600000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 03:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI]) Subsystem: Dell Device [1028:04d9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e1500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Dell Device [1028:04d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: I/O ports at 3000 [size=256] Region 2: Memory at e0404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at e0400000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 003: ID 0cf3:3002 Atheros Communications, Inc. Bus 001 Device 004: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader Bus 001 Device 005: ID 1bcf:2b81 Sunplus Innovation Technology Inc. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-rt-amd64 (SMP w/4 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-1-rt-amd64 depends on: ii debconf [debconf-2.0] 1.5.40 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.3 ii module-init-tools 3.16-1 Versions of packages linux-image-3.0.0-1-rt-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.0.0-1-rt-amd64 suggests: pn grub-pc 1.99-12 pn linux-doc-3.0.0 <none> Versions of packages linux-image-3.0.0-1-rt-amd64 is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-linux <none> pn firmware-linux-nonfree 0.34 pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information excluded
--- End Message ---
--- Begin Message ---
- To: 648751-done@bugs.debian.org
- Subject: Re: Bug#648751: linux-image-3.0.0-1-rt-amd64: rcu_preempt_state whileshutdown
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sat, 05 May 2012 04:05:02 +0100
- Message-id: <1336187102.8274.150.camel@deadeye>
- In-reply-to: <[🔎] AE039D180DAA4D8EA8ABD17B331E2317@THOR>
- References: <[🔎] AE039D180DAA4D8EA8ABD17B331E2317@THOR>
On Fri, 2012-05-04 at 21:23 -0300, Flávio Silveira wrote: > Hi Uwe, > > Sorry for the real late response. I installed the kernel you > suggested in the same day but I forgot to give my feedback. > > It solved all my issues, so I think this bugreport should be closed > as fixed. I'm currently running 3.2.0 and it's also well so far. > > Thanks for your help! Thanks for the confirmation. Closing the bug. Ben. -- Ben Hutchings Design a system any fool can use, and only a fool will want to use it.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---