Package: linux-2.6
Version: 2.6.32-41squeeze2
Severity: normal
Dear Debian folks,
the option suspend to RAM is not available on the motherboard SV266A
with a VIA KT266A(?) chipset [1].
$ echo mem | sudo tee /sys/power/state
mem
tee: /sys/power/state: No such device
$ ls /sys/power/
disk image_size pm_test resume state
$ ls /sys/power/state
/sys/power/state
$ sudo su
# echo mem > /sys/power/state
bash: echo: Schreibfehler: Kein passendes Gerät gefunden.
I looked around in the BIOS and the option *ACPI functions* is set to
*Enabled*. There is also an option *Suspend Mode* which I can set to
*Disable* or to a number of minutes. But I guess I do not want the BIOS
to suspend my system but using the operating system for that task.
Is Linux looking at the ACPI tables and they are wrong in this case? Can
I force suspend to RAM somehow to test it?
Thanks,
Paul
[1] http://lists.freedesktop.org/archives/pm-utils/2010-June/002176.html
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-41squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 26 05:20:33 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=582643ad-cb1e-4a01-bca4-5c8ad8562447 ro parport=0 quiet
** Not tainted
** Kernel log:
[ 1.880840] Uniform CD-ROM driver Revision: 3.20
[ 1.881684] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.886508] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.886770] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 1.909648] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.910146] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.911441] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 1.940052] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.106022] usb 2-1: New USB device found, idVendor=1241, idProduct=1122
[ 2.106030] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.106235] usb 2-1: configuration #1 chosen from 1 choice
[ 2.132546] usbcore: registered new interface driver hiddev
[ 2.151697] input: HID 1241:1122 as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input0
[ 2.151983] generic-usb 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:10.0-1/input0
[ 2.152093] usbcore: registered new interface driver usbhid
[ 2.152458] usbhid: v2.6:USB HID core driver
[ 2.348047] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 2.527930] usb 2-2: New USB device found, idVendor=046d, idProduct=c30f
[ 2.527939] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.527944] usb 2-2: Product: Logitech USB Keyboard
[ 2.527948] usb 2-2: Manufacturer: Logitech
[ 2.528216] usb 2-2: configuration #1 chosen from 1 choice
[ 2.545744] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input1
[ 2.545953] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.0-2/input0
[ 2.580104] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input2
[ 2.580237] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:10.0-2/input1
[ 2.627161] PM: Starting manual resume from disk
[ 2.627172] PM: Resume from partition 8:5
[ 2.627175] PM: Checking hibernation image.
[ 2.648921] PM: Error -22 checking image file
[ 2.648924] PM: Resume from disk failed.
[ 2.735754] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 18.393028] udev[329]: starting version 164
[ 18.701813] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 18.701831] ACPI: Power Button [PWRB]
[ 18.701952] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 18.701965] ACPI: Sleep Button [SLPB]
[ 18.702103] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 18.702109] ACPI: Power Button [PWRF]
[ 18.801413] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 18.813370] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 19.031666] NET: Registered protocol family 23
[ 19.042768] Marking TSC unstable due to TSC halts in idle
[ 19.044725] processor LNXCPU:00: registered as cooling_device1
[ 19.045676] Switching to clocksource acpi_pm
[ 19.078663] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.108505] parport_pc 00:0b: reported by Plug and Play ACPI
[ 19.108577] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 19.282437] [drm] Initialized drm 1.1.0 20060810
[ 19.364582] nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 19.377666] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000b2)
[ 19.377893] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[ 19.500118] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 19.500428] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 19.500433] [drm] nouveau 0000:01:00.0: BMP version 5.20
[ 19.500439] [drm] nouveau 0000:01:00.0: Bios version 03.11.01.30
[ 19.500445] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.4
[ 19.500451] [drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs
[ 19.500456] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1
[ 19.578677] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 19.578829] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 19.583010] [drm] nouveau 0000:01:00.0: No TV encoders found.
[ 19.583363] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xAB7E
[ 19.583382] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB26C
[ 19.583392] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xAB99
[ 19.583416] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xB213
[ 19.583429] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xAC2C
[ 19.583435] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xAD80
[ 19.583458] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xAC51
[ 19.583489] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0xAD1B
[ 19.597805] [TTM] Zone kernel: Available graphics memory: 257324 kiB.
[ 19.597830] [drm] nouveau 0000:01:00.0: 64 MiB VRAM
[ 19.597964] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 19.597988] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 19.598043] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 19.598049] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[ 19.598368] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 19.600164] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 19.600357] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 19.600369] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 19.638098] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 19.638454] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 19.639426] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 19.639432] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 19.776657] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo d7862800
[ 19.788389] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 19.788398] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output @
[ 19.790411] Console: switching to colour frame buffer device 160x64
[ 19.793044] fb0: nouveaufb frame buffer device
[ 19.793048] registered panic notifier
[ 19.793058] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 20.450707] Adding 874488k swap on /dev/sda5. Priority:-1 extents:1 across:874488k
[ 20.776679] loop: module loaded
[ 21.355267] fuse init (API version 7.13)
[ 22.264455] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 23.343815] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 23.348140] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 28.496058] end_request: I/O error, dev fd0, sector 0
[ 28.524054] end_request: I/O error, dev fd0, sector 0
[ 32.684071] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
cpufreq_stats 1997 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
cpufreq_userspace 1444 0
binfmt_misc 4875 1
fuse 44064 1
loop 9733 0
snd_via82xx 15256 0
gameport 6025 1 snd_via82xx
snd_ac97_codec 79200 1 snd_via82xx
ac97_bus 710 1 snd_ac97_codec
snd_pcm 47226 2 snd_via82xx,snd_ac97_codec
snd_page_alloc 4977 2 snd_via82xx,snd_pcm
snd_mpu401_uart 4067 1 snd_via82xx
snd_seq_midi 3576 0
snd_seq_midi_event 3684 1 snd_seq_midi
snd_rawmidi 12513 2 snd_mpu401_uart,snd_seq_midi
nouveau 314552 2
ttm 33266 1 nouveau
snd_seq 35327 2 snd_seq_midi,snd_seq_midi_event
drm_kms_helper 18533 1 nouveau
snd_timer 12270 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_viapro 4419 0
drm 111849 4 nouveau,ttm,drm_kms_helper
i2c_algo_bit 3493 1 nouveau
i2c_core 12751 5 nouveau,drm_kms_helper,i2c_viapro,drm,i2c_algo_bit
snd 34387 8 snd_via82xx,snd_ac97_codec,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
via_ircc 13188 0
psmouse 44777 0
parport_pc 15799 0
shpchp 21200 0
evdev 5609 11
parport 22554 1 parport_pc
processor 26259 1
serio_raw 2916 0
irda 75924 1 via_ircc
crc_ccitt 1039 1 irda
pcspkr 1207 0
soundcore 3450 1 snd
pci_hotplug 18545 1 shpchp
button 3598 1 nouveau
ext4 256328 1
mbcache 3762 1 ext4
jbd2 55995 1 ext4
crc16 1027 1 ext4
usbhid 27880 0
hid 50841 1 usbhid
sg 19905 0
sr_mod 10770 0
cdrom 26435 1 sr_mod
sd_mod 25945 3
crc_t10dif 1012 1 sd_mod
ata_generic 2247 0
uhci_hcd 15989 0
fan 2586 0
pata_via 5669 2
ehci_hcd 28449 0
thermal 9206 0
libata 115649 2 ata_generic,pata_via
via_rhine 14527 0
floppy 40923 0
thermal_sys 9378 3 processor,fan,thermal
usbcore 99125 4 usbhid,uhci_hcd,ehci_hcd
mii 2714 1 via_rhine
scsi_mod 104765 4 sg,sr_mod,sd_mod,libata
nls_base 4541 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099]
Subsystem: Elitegroup Computer Systems Device [1019:1841]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 5
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
Subsystem: Elitegroup Computer Systems Device [1019:1841]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at dc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
Subsystem: Elitegroup Computer Systems Device [1019:1841]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at e000 [size=256]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235 [1106:0102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at e2001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV11 [GeForce2 MX/MX 400] [10de:0110] (rev b2) (prog-if 00 [VGA controller])
Subsystem: PROLINK Microsystems Corp Device [1554:1081]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at e1000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: nouveau
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c30f Logitech, Inc. Logicool HID-Compliant Keyboard (106 key)
Bus 002 Device 002: ID 1241:1122 Belkin Typhoon Stream Optical Mouse USB+PS/2
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-41squeeze2 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-41squeeze2 Binary firmware for various driver
ii libc6-i686 2.11.3-2 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Attachment:
signature.asc
Description: This is a digitally signed message part