Bug#669894: linux-image-3.2.0-2-amd64: Webcam (ov519) only works after replugging it several times
Package: linux-2.6
Version: 3.2.15-1
Severity: normal
I have a Trust 320 Spacecam webcam here, which works fine, but only
after I replug it several times.
At boot time it fails to get initialized:
[ 2.068557] usbcore: registered new interface driver usbhid
[ 2.068558] usbhid: USB HID core driver
[ 2.152152] usb 1-2.2: new full-speed USB device number 5 using ehci_hcd
[ 2.240152] usb 1-2.2: device descriptor read/64, error 8
[ 2.432150] usb 1-2.2: device descriptor read/64, error 8
[ 2.624153] usb 1-2.2: new full-speed USB device number 6 using ehci_hcd
[ 2.712149] usb 1-2.2: device descriptor read/64, error 8
<other stuff>
[ 2.904149] usb 1-2.2: device descriptor read/64, error 8
[ 3.096152] usb 1-2.2: new full-speed USB device number 7 using ehci_hcd
[ 3.116523] usb 1-2.2: device descriptor read/8, error -61
[ 3.236522] usb 1-2.2: device descriptor read/8, error -61
[ 3.428150] usb 1-2.2: new full-speed USB device number 8 using ehci_hcd
[ 3.448523] usb 1-2.2: device descriptor read/8, error -61
[ 3.568523] usb 1-2.2: device descriptor read/8, error -61
[ 3.672157] hub 1-2:1.0: unable to enumerate USB device on port 2
when I replug it, it still fails:
[20206.700129] usb 1-2.2: new full-speed USB device number 9 using ehci_hcd
[20206.788133] usb 1-2.2: device descriptor read/64, error 8
[20206.980147] usb 1-2.2: device descriptor read/64, error 8
[20207.172135] usb 1-2.2: new full-speed USB device number 10 using ehci_hcd
[20207.260131] usb 1-2.2: device descriptor read/64, error 8
[20207.452145] usb 1-2.2: device descriptor read/64, error 8
[20207.644143] usb 1-2.2: new full-speed USB device number 11 using ehci_hcd
[20207.664510] usb 1-2.2: device descriptor read/8, error -61
[20207.784395] usb 1-2.2: device descriptor read/8, error -61
[20207.976145] usb 1-2.2: new full-speed USB device number 12 using ehci_hcd
[20207.996513] usb 1-2.2: device descriptor read/8, error -61
[20208.116515] usb 1-2.2: device descriptor read/8, error -61
[20208.220157] hub 1-2:1.0: unable to enumerate USB device on port 2
then I replug it again and it works 100% fine:
[20279.404085] usb 1-2.2: new full-speed USB device number 13 using ehci_hcd
[20279.513459] usb 1-2.2: New USB device found, idVendor=05a9, idProduct=8519
[20279.513462] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20279.513465] usb 1-2.2: Product: USB Camera
[20279.513466] usb 1-2.2: Manufacturer: OmniVision Technologies, Inc.
[20279.714000] Linux media interface: v0.10
[20279.727781] Linux video capture interface: v2.00
[20279.730517] gspca_main: v2.14.0 registered
[20279.733294] gspca_main: ov519-2.14.0 probing 05a9:8519
[20279.916286] input: ov519 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.2/input/input8
[20279.916482] usbcore: registered new interface driver ov519
[20279.917794] usbcore: registered new interface driver snd-usb-audio
As it works fine after replugging (twice), I guess it's not a problem
with the hardware...
-- Package-specific info:
** Version:
Linux version 3.2.0-2-amd64 (Debian 3.2.15-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Sun Apr 15 16:47:38 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=12635a70-3def-4b39-bc78-1ee0ad29a2d2 ro quiet
** Tainted: PWO (4609)
* Proprietary module has been loaded.
* Taint on warning.
* Out-of-tree module has been loaded.
** Kernel log:
[19194.144009] eth1: no IPv6 routers present
[19242.064006] eth1: no IPv6 routers present
[19524.928020] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[19586.000021] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[19587.840008] eth1: no IPv6 routers present
[19635.536011] eth1: no IPv6 routers present
[19683.856011] eth1: no IPv6 routers present
[19731.584009] eth1: no IPv6 routers present
[20076.080007] eth1: no IPv6 routers present
[20124.624007] eth1: no IPv6 routers present
[20172.256007] eth1: no IPv6 routers present
[20206.700129] usb 1-2.2: new full-speed USB device number 9 using ehci_hcd
[20206.788133] usb 1-2.2: device descriptor read/64, error 8
[20206.980147] usb 1-2.2: device descriptor read/64, error 8
[20207.172135] usb 1-2.2: new full-speed USB device number 10 using ehci_hcd
[20207.260131] usb 1-2.2: device descriptor read/64, error 8
[20207.452145] usb 1-2.2: device descriptor read/64, error 8
[20207.644143] usb 1-2.2: new full-speed USB device number 11 using ehci_hcd
[20207.664510] usb 1-2.2: device descriptor read/8, error -61
[20207.784395] usb 1-2.2: device descriptor read/8, error -61
[20207.976145] usb 1-2.2: new full-speed USB device number 12 using ehci_hcd
[20207.996513] usb 1-2.2: device descriptor read/8, error -61
[20208.116515] usb 1-2.2: device descriptor read/8, error -61
[20208.220157] hub 1-2:1.0: unable to enumerate USB device on port 2
[20220.552011] eth1: no IPv6 routers present
[20279.404085] usb 1-2.2: new full-speed USB device number 13 using ehci_hcd
[20279.513459] usb 1-2.2: New USB device found, idVendor=05a9, idProduct=8519
[20279.513462] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20279.513465] usb 1-2.2: Product: USB Camera
[20279.513466] usb 1-2.2: Manufacturer: OmniVision Technologies, Inc.
[20279.714000] Linux media interface: v0.10
[20279.727781] Linux video capture interface: v2.00
[20279.730517] gspca_main: v2.14.0 registered
[20279.733294] gspca_main: ov519-2.14.0 probing 05a9:8519
[20279.916286] input: ov519 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.2/input/input8
[20279.916482] usbcore: registered new interface driver ov519
[20279.917794] usbcore: registered new interface driver snd-usb-audio
[20565.960014] eth1: no IPv6 routers present
[20614.000023] eth1: no IPv6 routers present
[20661.472011] eth1: no IPv6 routers present
[20709.728009] eth1: no IPv6 routers present
[20846.928019] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[21023.952018] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[21054.304007] eth1: no IPv6 routers present
[21102.896006] eth1: no IPv6 routers present
[21150.440006] eth1: no IPv6 routers present
[21198.928009] eth1: no IPv6 routers present
[21543.456007] eth1: no IPv6 routers present
[21591.760008] eth1: no IPv6 routers present
[21639.296007] eth1: no IPv6 routers present
[21666.912028] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[21687.808007] eth1: no IPv6 routers present
[21727.876894] Forged DCC command from 192.168.1.65: 85.151.238.68:33885
[22032.832007] eth1: no IPv6 routers present
[22080.736005] eth1: no IPv6 routers present
[22123.920013] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[22128.640006] eth1: no IPv6 routers present
[22176.992007] eth1: no IPv6 routers present
[22521.544007] eth1: no IPv6 routers present
[22569.072006] eth1: no IPv6 routers present
[22617.528008] eth1: no IPv6 routers present
[22665.608004] eth1: no IPv6 routers present
[22870.928017] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[23010.408008] eth1: no IPv6 routers present
[23058.272011] eth1: no IPv6 routers present
[23106.496009] eth1: no IPv6 routers present
[23154.304007] eth1: no IPv6 routers present
[23499.232008] eth1: no IPv6 routers present
[23547.712008] eth1: no IPv6 routers present
[23561.936015] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[23595.600009] eth1: no IPv6 routers present
[23643.784006] eth1: no IPv6 routers present
[23988.560009] eth1: no IPv6 routers present
[24036.264007] eth1: no IPv6 routers present
[24084.760009] eth1: no IPv6 routers present
[24132.976008] eth1: no IPv6 routers present
[24298.932022] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[24363.908020] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[24478.048007] eth1: no IPv6 routers present
[24526.000008] eth1: no IPv6 routers present
[24573.296014] eth1: no IPv6 routers present
[24621.104006] eth1: no IPv6 routers present
[24702.928015] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[24966.312010] eth1: no IPv6 routers present
[25014.944007] eth1: no IPv6 routers present
[25062.024006] eth1: no IPv6 routers present
[25110.968007] eth1: no IPv6 routers present
[26691.904018] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[28142.928018] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[28759.920020] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[29766.928018] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[30805.968032] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[31150.992019] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[31597.606905] Forged DCC command from 192.168.1.65: 85.151.238.68:33885
[32081.904025] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[32434.920022] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[32439.777982] Forged DCC command from 192.168.1.65: 85.151.238.68:33885
[32793.936026] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[33804.944032] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
[33887.952022] usb 1-5: reset high-speed USB device number 3 using ehci_hcd
** Model information
sys_vendor: System manufacturer
product_name: P5Q-E
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0803
board_vendor: ASUSTeK Computer INC.
board_name: P5Q-E
board_version: Rev 1.xx
** Loaded modules:
snd_usb_audio
snd_usbmidi_lib
gspca_ov519
gspca_main
videodev
v4l2_compat_ioctl32
media
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
acpi_cpufreq
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
rfkill
crc16
binfmt_misc
act_police
cls_basic
cls_flow
cls_fw
cls_u32
sch_tbf
sch_prio
sch_htb
sch_hfsc
sch_ingress
sch_sfq
xt_statistic
xt_CT
xt_time
xt_connlimit
xt_realm
xt_addrtype
iptable_raw
xt_comment
xt_recent
xt_policy
ipt_ULOG
ipt_REJECT
ipt_REDIRECT
ipt_NETMAP
ipt_MASQUERADE
ipt_ECN
ipt_ecn
ipt_CLUSTERIP
ipt_ah
xt_set
ip_set
nf_nat_tftp
nf_nat_snmp_basic
nf_conntrack_snmp
nf_nat_sip
nf_nat_pptp
nf_nat_proto_gre
nf_nat_irc
nf_nat_h323
nf_nat_ftp
nf_nat_amanda
ts_kmp
nf_conntrack_amanda
nf_conntrack_sane
nf_conntrack_tftp
nf_conntrack_sip
nf_conntrack_proto_udplite
nf_conntrack_proto_sctp
nf_conntrack_pptp
nf_conntrack_proto_gre
nf_conntrack_netlink
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_conntrack_irc
nf_conntrack_h323
nf_conntrack_ftp
xt_TPROXY
nf_defrag_ipv6
ip6_tables
nf_tproxy_core
xt_tcpmss
xt_pkttype
xt_physdev
xt_owner
xt_NFQUEUE
xt_NFLOG
nfnetlink_log
xt_multiport
xt_mark
xt_mac
xt_limit
xt_length
xt_iprange
xt_helper
xt_hashlimit
xt_DSCP
xt_dscp
xt_dccp
xt_conntrack
xt_connmark
xt_CLASSIFY
xt_AUDIT
ipt_LOG
xt_tcpudp
xt_state
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
iptable_mangle
nfnetlink
iptable_filter
ip_tables
x_tables
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
coretemp
loop
firewire_sbp2
snd_hda_codec_analog
nvidia(P)
hid_logitech
snd_hda_intel
ff_memless
snd_hda_codec
joydev
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
snd
iTCO_wdt
iTCO_vendor_support
i2c_i801
i2c_core
processor
button
thermal_sys
psmouse
serio_raw
evdev
soundcore
pcspkr
asus_atk0110
ext3
mbcache
jbd
usbhid
hid
sd_mod
sr_mod
crc_t10dif
cdrom
usb_storage
uas
ata_generic
uhci_hcd
floppy
ata_piix
libata
firewire_ohci
skge
firewire_core
crc_itu_t
scsi_mod
sky2
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:8311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0200000-f05fffff
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a880 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a480 [size=16]
Region 5: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G92 [GeForce 8800 GT] [10de:0611] (rev a2) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
[virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at feafc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at d800 [size=256]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
04:02.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 14)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at e800 [size=256]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
04:03.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. IEEE 1394a Firewire Controller [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 003: ID 163f:1611
Bus 001 Device 004: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse]
Bus 006 Device 002: ID 05d8:4002 Ultima Electronics Corp. Artec Ultima 2000 (GT6801 based)/Lifetec LT9385/ScanMagic 1200 UB Plus Scanner
Bus 006 Device 003: ID 046d:c30e Logitech, Inc. UltraX Keyboard (Y-BL49)
Bus 008 Device 002: ID 0529:0514 Aladdin Knowledge Systems eToken Pro v4.2.5.4
Bus 008 Device 003: ID 046d:c218 Logitech, Inc. Logitech RumblePad 2 USB
Bus 001 Device 013: ID 05a9:8519 OmniVision Technologies, Inc. OV519 Webcam
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.42
ii initramfs-tools [linux-initramfs-tool] 0.101
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2
Versions of packages linux-image-3.2.0-2-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-2-amd64 suggests:
pn grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false
linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64:
linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true
Reply to: