Bug#666108: Dell PERC H710P is not supported by Squeeze Standard Kernel
block 624794 by 666108
tags 666108 + upstream patch moreinfo
# hardware support
severity 666108 important
quit
Buford Peek wrote:
> dmesg | grep mega returned nothing...
Thanks. Support for this controller was added during the 2.6.38-rc1
merge window (commit 9c915a8c99bc, "[SCSI] megaraid_sas: Add 9565/9285
specific code", 2010-12-21).
Could you try the attached patch series against the squeeze kernel?
Instructions are at [1], and if you have any questions, please don't
hesitate to ask.
Hope that helps,
Jonathan
[1] http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official
or the corresponding page in the debian-kernel-handbook package
Adam Radford (5):
[SCSI] megaraid_sas: Rename megaraid_sas.c to megaraid_sas_base.c
[SCSI] megaraid_sas: Add MSI-X support and msix_disable module parameter
[SCSI] megaraid_sas: Use lowest memory bar for SR-IOV VF support
[SCSI] megaraid_sas: Add struct megasas_instance_template changes
[SCSI] megaraid_sas: Add 9565/9285 specific code
Noriyuki Fujii (1):
[SCSI] megaraid_sas: make driver PCI legacy I/O port free driver
Yang, Bo (6):
[SCSI] megaraid_sas: infrastructure to get PDs from FW
[SCSI] megaraid_sas: Add the support for updating the OS after adding/
removing the devices from FW
[SCSI] megaraid_sas: add the logical drive list to driver
[SCSI] megaraid_sas: driver fixed the device update issue
[SCSI] megaraid_sas: add the IEEE SGE support to SAS2 controller
[SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive
drivers/scsi/megaraid/Makefile | 2 +
drivers/scsi/megaraid/megaraid_sas.c | 3827 -------------------
drivers/scsi/megaraid/megaraid_sas.h | 273 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 5253 +++++++++++++++++++++++++++
drivers/scsi/megaraid/megaraid_sas_fp.c | 516 +++
drivers/scsi/megaraid/megaraid_sas_fusion.c | 2248 ++++++++++++
drivers/scsi/megaraid/megaraid_sas_fusion.h | 695 ++++
7 files changed, 8974 insertions(+), 3840 deletions(-)
delete mode 100644 drivers/scsi/megaraid/megaraid_sas.c
create mode 100644 drivers/scsi/megaraid/megaraid_sas_base.c
create mode 100644 drivers/scsi/megaraid/megaraid_sas_fp.c
create mode 100644 drivers/scsi/megaraid/megaraid_sas_fusion.c
create mode 100644 drivers/scsi/megaraid/megaraid_sas_fusion.h
From: "Yang, Bo" <Bo.Yang@lsi.com>
Date: Tue, 6 Oct 2009 14:27:54 -0600
Subject: [SCSI] megaraid_sas: infrastructure to get PDs from FW
commit 81e403ce3c6a34cd705bf54d4cdeefdeb7068a8d upstream.
Add system PDs to OS. Driver implemented the get_pd_list function to
get the system PD from FW.
Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas.c | 96 ++++++++++++++++++++++++++++++++++
drivers/scsi/megaraid/megaraid_sas.h | 88 ++++++++++++++++++++++++++++++-
2 files changed, 182 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 28b27ce1a914..38abd98a1ffb 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -2057,6 +2057,98 @@ static int megasas_alloc_cmds(struct megasas_instance *instance)
return 0;
}
+/*
+ * megasas_get_pd_list_info - Returns FW's pd_list structure
+ * @instance: Adapter soft state
+ * @pd_list: pd_list structure
+ *
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure. This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+static int
+megasas_get_pd_list(struct megasas_instance *instance)
+{
+ int ret = 0, pd_index = 0;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct MR_PD_LIST *ci;
+ struct MR_PD_ADDRESS *pd_addr;
+ dma_addr_t ci_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas (get_pd_list): Failed to get cmd\n");
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ ci = pci_alloc_consistent(instance->pdev,
+ MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST), &ci_h);
+
+ if (!ci) {
+ printk(KERN_DEBUG "Failed to alloc mem for pd_list\n");
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(ci, 0, sizeof(*ci));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->mbox.b[0] = MR_PD_QUERY_TYPE_EXPOSED_TO_HOST;
+ dcmd->mbox.b[1] = 0;
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST);
+ dcmd->opcode = MR_DCMD_PD_LIST_QUERY;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST);
+
+ if (!megasas_issue_polled(instance, cmd)) {
+ ret = 0;
+ } else {
+ ret = -1;
+ }
+
+ /*
+ * the following function will get the instance PD LIST.
+ */
+
+ pd_addr = ci->addr;
+
+ if ( ret == 0 &&
+ (ci->count <
+ (MEGASAS_MAX_PD_CHANNELS * MEGASAS_MAX_DEV_PER_CHANNEL))) {
+
+ memset(instance->pd_list, 0,
+ MEGASAS_MAX_PD * sizeof(struct megasas_pd_list));
+
+ for (pd_index = 0; pd_index < ci->count; pd_index++) {
+
+ instance->pd_list[pd_addr->deviceId].tid =
+ pd_addr->deviceId;
+ instance->pd_list[pd_addr->deviceId].driveType =
+ pd_addr->scsiDevType;
+ instance->pd_list[pd_addr->deviceId].driveState =
+ MR_PD_STATE_SYSTEM;
+ pd_addr++;
+ }
+ }
+
+ pci_free_consistent(instance->pdev,
+ MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
+ ci, ci_h);
+ megasas_return_cmd(instance, cmd);
+
+ return ret;
+}
+
+
/**
* megasas_get_controller_info - Returns FW's controller structure
* @instance: Adapter soft state
@@ -2347,6 +2439,10 @@ static int megasas_init_mfi(struct megasas_instance *instance)
if (megasas_issue_init_mfi(instance))
goto fail_fw_init;
+ memset(instance->pd_list, 0 ,
+ (MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)));
+ megasas_get_pd_list(instance);
+
ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL);
/*
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 3b1eed1bbbe0..dc88ea79b0db 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -133,6 +133,7 @@
#define MR_DCMD_CLUSTER 0x08000000
#define MR_DCMD_CLUSTER_RESET_ALL 0x08010100
#define MR_DCMD_CLUSTER_RESET_LD 0x08010200
+#define MR_DCMD_PD_LIST_QUERY 0x02010100
/*
* MFI command completion codes
@@ -253,9 +254,89 @@ enum MR_EVT_ARGS {
MR_EVT_ARGS_STR,
MR_EVT_ARGS_TIME,
MR_EVT_ARGS_ECC,
+ MR_EVT_ARGS_LD_PROP,
+ MR_EVT_ARGS_PD_SPARE,
+ MR_EVT_ARGS_PD_INDEX,
+ MR_EVT_ARGS_DIAG_PASS,
+ MR_EVT_ARGS_DIAG_FAIL,
+ MR_EVT_ARGS_PD_LBA_LBA,
+ MR_EVT_ARGS_PORT_PHY,
+ MR_EVT_ARGS_PD_MISSING,
+ MR_EVT_ARGS_PD_ADDRESS,
+ MR_EVT_ARGS_BITMAP,
+ MR_EVT_ARGS_CONNECTOR,
+ MR_EVT_ARGS_PD_PD,
+ MR_EVT_ARGS_PD_FRU,
+ MR_EVT_ARGS_PD_PATHINFO,
+ MR_EVT_ARGS_PD_POWER_STATE,
+ MR_EVT_ARGS_GENERIC,
+};
+/*
+ * define constants for device list query options
+ */
+enum MR_PD_QUERY_TYPE {
+ MR_PD_QUERY_TYPE_ALL = 0,
+ MR_PD_QUERY_TYPE_STATE = 1,
+ MR_PD_QUERY_TYPE_POWER_STATE = 2,
+ MR_PD_QUERY_TYPE_MEDIA_TYPE = 3,
+ MR_PD_QUERY_TYPE_SPEED = 4,
+ MR_PD_QUERY_TYPE_EXPOSED_TO_HOST = 5,
};
+enum MR_PD_STATE {
+ MR_PD_STATE_UNCONFIGURED_GOOD = 0x00,
+ MR_PD_STATE_UNCONFIGURED_BAD = 0x01,
+ MR_PD_STATE_HOT_SPARE = 0x02,
+ MR_PD_STATE_OFFLINE = 0x10,
+ MR_PD_STATE_FAILED = 0x11,
+ MR_PD_STATE_REBUILD = 0x14,
+ MR_PD_STATE_ONLINE = 0x18,
+ MR_PD_STATE_COPYBACK = 0x20,
+ MR_PD_STATE_SYSTEM = 0x40,
+ };
+
+
+ /*
+ * defines the physical drive address structure
+ */
+struct MR_PD_ADDRESS {
+ u16 deviceId;
+ u16 enclDeviceId;
+
+ union {
+ struct {
+ u8 enclIndex;
+ u8 slotNumber;
+ } mrPdAddress;
+ struct {
+ u8 enclPosition;
+ u8 enclConnectorIndex;
+ } mrEnclAddress;
+ };
+ u8 scsiDevType;
+ union {
+ u8 connectedPortBitmap;
+ u8 connectedPortNumbers;
+ };
+ u64 sasAddr[2];
+} __packed;
+
+/*
+ * defines the physical drive list structure
+ */
+struct MR_PD_LIST {
+ u32 size;
+ u32 count;
+ struct MR_PD_ADDRESS addr[1];
+} __packed;
+
+struct megasas_pd_list {
+ u16 tid;
+ u8 driveType;
+ u8 driveState;
+} __packed;
+
/*
* SAS controller properties
*/
@@ -284,7 +365,7 @@ struct megasas_ctrl_prop {
u8 expose_encl_devices;
u8 reserved[38];
-} __attribute__ ((packed));
+} __packed;
/*
* SAS controller information
@@ -527,7 +608,7 @@ struct megasas_ctrl_info {
u8 pad[0x800 - 0x6a0];
-} __attribute__ ((packed));
+} __packed;
/*
* ===============================
@@ -542,6 +623,8 @@ struct megasas_ctrl_info {
#define MEGASAS_DEFAULT_INIT_ID -1
#define MEGASAS_MAX_LUN 8
#define MEGASAS_MAX_LD 64
+#define MEGASAS_MAX_PD (MEGASAS_MAX_PD_CHANNELS * \
+ MEGASAS_MAX_DEV_PER_CHANNEL)
#define MEGASAS_DBG_LVL 1
@@ -1079,6 +1162,7 @@ struct megasas_instance {
unsigned long base_addr;
struct megasas_register_set __iomem *reg_set;
+ struct megasas_pd_list pd_list[MEGASAS_MAX_PD];
s8 init_id;
u16 max_num_sge;
--
1.7.10.rc1
From: "Yang, Bo" <Bo.Yang@lsi.com>
Date: Tue, 6 Oct 2009 14:50:17 -0600
Subject: [SCSI] megaraid_sas: Add the support for updating the OS after adding/removing the devices from FW
commit 7e8a75f4dfbff173977b2f58799c3eceb7b09afd upstream.
Driver will update the OS devices after adding and deleting the device
from FW. When driver receive add or delete AEN from FW, driver will
send the DCMD cmd to get the System PD list from FW. Then driver will
check if this device already in the OS: If add event and OS don't have
the device (but it is in the list), driver add the device to OS,
otherwise driver will not add. If remove event, driver will check the
list, if is not in the list, but OS have the device, driver will
remove the device.
Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas.c | 125 +++++++++++++++++++++++++++++++++-
drivers/scsi/megaraid/megaraid_sas.h | 17 +++++
2 files changed, 141 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 38abd98a1ffb..b690c8ca75cc 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -1402,6 +1402,8 @@ megasas_bios_param(struct scsi_device *sdev, struct block_device *bdev,
return 0;
}
+static void megasas_aen_polling(struct work_struct *work);
+
/**
* megasas_service_aen - Processes an event notification
* @instance: Adapter soft state
@@ -1433,6 +1435,20 @@ megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd)
instance->aen_cmd = NULL;
megasas_return_cmd(instance, cmd);
+
+ if (instance->unload == 0) {
+ struct megasas_aen_event *ev;
+ ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev) {
+ printk(KERN_ERR "megasas_service_aen: out of memory\n");
+ } else {
+ ev->instance = instance;
+ instance->ev = ev;
+ INIT_WORK(&ev->hotplug_work, megasas_aen_polling);
+ schedule_delayed_work(
+ (struct delayed_work *)&ev->hotplug_work, 0);
+ }
+ }
}
/*
@@ -1952,6 +1968,7 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
}
cmd->frame->io.context = cmd->index;
+ cmd->frame->io.pad_0 = 0;
}
return 0;
@@ -2148,7 +2165,6 @@ megasas_get_pd_list(struct megasas_instance *instance)
return ret;
}
-
/**
* megasas_get_controller_info - Returns FW's controller structure
* @instance: Adapter soft state
@@ -2857,6 +2873,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
*instance->producer = 0;
*instance->consumer = 0;
megasas_poll_wait_aen = 0;
+ instance->ev = NULL;
instance->evt_detail = pci_alloc_consistent(pdev,
sizeof(struct
@@ -3079,6 +3096,16 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state)
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN);
+
+ /* cancel the delayed work if this work still in queue */
+ if (instance->ev != NULL) {
+ struct megasas_aen_event *ev = instance->ev;
+ cancel_delayed_work(
+ (struct delayed_work *)&ev->hotplug_work);
+ flush_scheduled_work();
+ instance->ev = NULL;
+ }
+
tasklet_kill(&instance->isr_tasklet);
pci_set_drvdata(instance->pdev, instance);
@@ -3219,6 +3246,16 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev)
scsi_remove_host(instance->host);
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
+
+ /* cancel the delayed work if this work still in queue*/
+ if (instance->ev != NULL) {
+ struct megasas_aen_event *ev = instance->ev;
+ cancel_delayed_work(
+ (struct delayed_work *)&ev->hotplug_work);
+ flush_scheduled_work();
+ instance->ev = NULL;
+ }
+
tasklet_kill(&instance->isr_tasklet);
/*
@@ -3814,6 +3851,92 @@ out:
return retval;
}
+static void
+megasas_aen_polling(struct work_struct *work)
+{
+ struct megasas_aen_event *ev =
+ container_of(work, struct megasas_aen_event, hotplug_work);
+ struct megasas_instance *instance = ev->instance;
+ union megasas_evt_class_locale class_locale;
+ struct Scsi_Host *host;
+ struct scsi_device *sdev1;
+ u16 pd_index = 0;
+ int i, j, doscan = 0;
+ u32 seq_num;
+ int error;
+
+ if (!instance) {
+ printk(KERN_ERR "invalid instance!\n");
+ kfree(ev);
+ return;
+ }
+ instance->ev = NULL;
+ host = instance->host;
+ if (instance->evt_detail) {
+
+ switch (instance->evt_detail->code) {
+ case MR_EVT_PD_INSERTED:
+ case MR_EVT_PD_REMOVED:
+ case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
+ doscan = 1;
+ break;
+ default:
+ doscan = 0;
+ break;
+ }
+ } else {
+ printk(KERN_ERR "invalid evt_detail!\n");
+ kfree(ev);
+ return;
+ }
+
+ if (doscan) {
+ printk(KERN_INFO "scanning ...\n");
+ megasas_get_pd_list(instance);
+ for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
+ for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
+ pd_index = i*MEGASAS_MAX_DEV_PER_CHANNEL + j;
+ sdev1 = scsi_device_lookup(host, i, j, 0);
+ if (instance->pd_list[pd_index].driveState ==
+ MR_PD_STATE_SYSTEM) {
+ if (!sdev1) {
+ scsi_add_device(host, i, j, 0);
+ }
+ if (sdev1)
+ scsi_device_put(sdev1);
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ }
+
+ if ( instance->aen_cmd != NULL ) {
+ kfree(ev);
+ return ;
+ }
+
+ seq_num = instance->evt_detail->seq_num + 1;
+
+ /* Register AEN with FW for latest sequence number plus 1 */
+ class_locale.members.reserved = 0;
+ class_locale.members.locale = MR_EVT_LOCALE_ALL;
+ class_locale.members.class = MR_EVT_CLASS_DEBUG;
+ mutex_lock(&instance->aen_mutex);
+ error = megasas_register_aen(instance, seq_num,
+ class_locale.word);
+ mutex_unlock(&instance->aen_mutex);
+
+ if (error)
+ printk(KERN_ERR "register aen failed error %x\n", error);
+
+ kfree(ev);
+}
+
+
static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUSR,
megasas_sysfs_show_poll_mode_io,
megasas_sysfs_set_poll_mode_io);
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index dc88ea79b0db..b0a85fc72d8d 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -284,6 +284,17 @@ enum MR_PD_QUERY_TYPE {
MR_PD_QUERY_TYPE_EXPOSED_TO_HOST = 5,
};
+#define MR_EVT_CFG_CLEARED 0x0004
+#define MR_EVT_LD_STATE_CHANGE 0x0051
+#define MR_EVT_PD_INSERTED 0x005b
+#define MR_EVT_PD_REMOVED 0x0070
+#define MR_EVT_LD_CREATED 0x008a
+#define MR_EVT_LD_DELETED 0x008b
+#define MR_EVT_FOREIGN_CFG_IMPORTED 0x00db
+#define MR_EVT_LD_OFFLINE 0x00fc
+#define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED 0x0152
+#define MAX_LOGICAL_DRIVES 64
+
enum MR_PD_STATE {
MR_PD_STATE_UNCONFIGURED_GOOD = 0x00,
MR_PD_STATE_UNCONFIGURED_BAD = 0x01,
@@ -1149,6 +1160,11 @@ struct megasas_evt_detail {
} __attribute__ ((packed));
+struct megasas_aen_event {
+ struct work_struct hotplug_work;
+ struct megasas_instance *instance;
+};
+
struct megasas_instance {
u32 *producer;
@@ -1168,6 +1184,7 @@ struct megasas_instance {
u16 max_num_sge;
u16 max_fw_cmds;
u32 max_sectors_per_req;
+ struct megasas_aen_event *ev;
struct megasas_cmd **cmd_list;
struct list_head cmd_pool;
--
1.7.10.rc1
From: "Yang, Bo" <Bo.Yang@lsi.com>
Date: Sun, 6 Dec 2009 08:30:19 -0700
Subject: [SCSI] megaraid_sas: add the logical drive list to driver
commit bdc6fb8d69fab7b4b7f70823e3932bd8e4cfd7db upstream.
Driver issue the get ld list to fw to get the logic drive list.
Driver will keep the logic drive list for the internal use after
driver load.
Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas.c | 95 ++++++++++++++++++++++++++++++++++
drivers/scsi/megaraid/megaraid_sas.h | 30 +++++++++++
2 files changed, 125 insertions(+)
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index b690c8ca75cc..3a35e27e1ab8 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -817,6 +817,12 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
pthru->sge_count = megasas_make_sgl32(instance, scp,
&pthru->sgl);
+ if (pthru->sge_count > instance->max_num_sge) {
+ printk(KERN_ERR "megasas: DCDB two many SGE NUM=%x\n",
+ pthru->sge_count);
+ return 0;
+ }
+
/*
* Sense info specific
*/
@@ -935,6 +941,12 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
} else
ldio->sge_count = megasas_make_sgl32(instance, scp, &ldio->sgl);
+ if (ldio->sge_count > instance->max_num_sge) {
+ printk(KERN_ERR "megasas: build_ld_io: sge_count = %x\n",
+ ldio->sge_count);
+ return 0;
+ }
+
/*
* Sense info specific
*/
@@ -2165,6 +2177,86 @@ megasas_get_pd_list(struct megasas_instance *instance)
return ret;
}
+/*
+ * megasas_get_ld_list_info - Returns FW's ld_list structure
+ * @instance: Adapter soft state
+ * @ld_list: ld_list structure
+ *
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure. This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+static int
+megasas_get_ld_list(struct megasas_instance *instance)
+{
+ int ret = 0, ld_index = 0, ids = 0;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct MR_LD_LIST *ci;
+ dma_addr_t ci_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas_get_ld_list: Failed to get cmd\n");
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ ci = pci_alloc_consistent(instance->pdev,
+ sizeof(struct MR_LD_LIST),
+ &ci_h);
+
+ if (!ci) {
+ printk(KERN_DEBUG "Failed to alloc mem in get_ld_list\n");
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(ci, 0, sizeof(*ci));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = sizeof(struct MR_LD_LIST);
+ dcmd->opcode = MR_DCMD_LD_GET_LIST;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = sizeof(struct MR_LD_LIST);
+ dcmd->pad_0 = 0;
+
+ if (!megasas_issue_polled(instance, cmd)) {
+ ret = 0;
+ } else {
+ ret = -1;
+ }
+
+ /* the following function will get the instance PD LIST */
+
+ if ((ret == 0) && (ci->ldCount < MAX_LOGICAL_DRIVES)) {
+ memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
+
+ for (ld_index = 0; ld_index < ci->ldCount; ld_index++) {
+ if (ci->ldList[ld_index].state != 0) {
+ ids = ci->ldList[ld_index].ref.targetId;
+ instance->ld_ids[ids] =
+ ci->ldList[ld_index].ref.targetId;
+ }
+ }
+ }
+
+ pci_free_consistent(instance->pdev,
+ sizeof(struct MR_LD_LIST),
+ ci,
+ ci_h);
+
+ megasas_return_cmd(instance, cmd);
+ return ret;
+}
+
/**
* megasas_get_controller_info - Returns FW's controller structure
* @instance: Adapter soft state
@@ -2459,6 +2551,9 @@ static int megasas_init_mfi(struct megasas_instance *instance)
(MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)));
megasas_get_pd_list(instance);
+ memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
+ megasas_get_ld_list(instance);
+
ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL);
/*
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index b0a85fc72d8d..29cd2c877952 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -116,6 +116,7 @@
#define MFI_CMD_STP 0x08
#define MR_DCMD_CTRL_GET_INFO 0x01010000
+#define MR_DCMD_LD_GET_LIST 0x03010000
#define MR_DCMD_CTRL_CACHE_FLUSH 0x01101000
#define MR_FLUSH_CTRL_CACHE 0x01
@@ -348,6 +349,32 @@ struct megasas_pd_list {
u8 driveState;
} __packed;
+ /*
+ * defines the logical drive reference structure
+ */
+union MR_LD_REF {
+ struct {
+ u8 targetId;
+ u8 reserved;
+ u16 seqNum;
+ };
+ u32 ref;
+} __packed;
+
+/*
+ * defines the logical drive list structure
+ */
+struct MR_LD_LIST {
+ u32 ldCount;
+ u32 reserved;
+ struct {
+ union MR_LD_REF ref;
+ u8 state;
+ u8 reserved[3];
+ u64 size;
+ } ldList[MAX_LOGICAL_DRIVES];
+} __packed;
+
/*
* SAS controller properties
*/
@@ -636,6 +663,8 @@ struct megasas_ctrl_info {
#define MEGASAS_MAX_LD 64
#define MEGASAS_MAX_PD (MEGASAS_MAX_PD_CHANNELS * \
MEGASAS_MAX_DEV_PER_CHANNEL)
+#define MEGASAS_MAX_LD_IDS (MEGASAS_MAX_LD_CHANNELS * \
+ MEGASAS_MAX_DEV_PER_CHANNEL)
#define MEGASAS_DBG_LVL 1
@@ -1179,6 +1208,7 @@ struct megasas_instance {
struct megasas_register_set __iomem *reg_set;
struct megasas_pd_list pd_list[MEGASAS_MAX_PD];
+ u8 ld_ids[MEGASAS_MAX_LD_IDS];
s8 init_id;
u16 max_num_sge;
--
1.7.10.rc1
From: "Yang, Bo" <Bo.Yang@lsi.com>
Date: Sun, 6 Dec 2009 08:39:25 -0700
Subject: [SCSI] megaraid_sas: driver fixed the device update issue
commit c978684254d11e3768c5a0b2780302fb0cada29c upstream.
driver fixed the device update issue after get the AEN PD delete/ADD
and LD add/delete from FW.
Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas.c | 142 ++++++++++++++++++++++++++++++++++
1 file changed, 142 insertions(+)
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 3a35e27e1ab8..c7e1e40ad24a 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -3956,6 +3956,7 @@ megasas_aen_polling(struct work_struct *work)
struct Scsi_Host *host;
struct scsi_device *sdev1;
u16 pd_index = 0;
+ u16 ld_index = 0;
int i, j, doscan = 0;
u32 seq_num;
int error;
@@ -3971,8 +3972,124 @@ megasas_aen_polling(struct work_struct *work)
switch (instance->evt_detail->code) {
case MR_EVT_PD_INSERTED:
+ if (megasas_get_pd_list(instance) == 0) {
+ for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+
+ pd_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 =
+ scsi_device_lookup(host, i, j, 0);
+
+ if (instance->pd_list[pd_index].driveState
+ == MR_PD_STATE_SYSTEM) {
+ if (!sdev1) {
+ scsi_add_device(host, i, j, 0);
+ }
+
+ if (sdev1)
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ doscan = 0;
+ break;
+
case MR_EVT_PD_REMOVED:
+ if (megasas_get_pd_list(instance) == 0) {
+ megasas_get_pd_list(instance);
+ for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+
+ pd_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 =
+ scsi_device_lookup(host, i, j, 0);
+
+ if (instance->pd_list[pd_index].driveState
+ == MR_PD_STATE_SYSTEM) {
+ if (sdev1) {
+ scsi_device_put(sdev1);
+ }
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ }
+ doscan = 0;
+ break;
+
+ case MR_EVT_LD_OFFLINE:
+ case MR_EVT_LD_DELETED:
+ megasas_get_ld_list(instance);
+ for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+
+ ld_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 = scsi_device_lookup(host,
+ i + MEGASAS_MAX_LD_CHANNELS,
+ j,
+ 0);
+
+ if (instance->ld_ids[ld_index] != 0xff) {
+ if (sdev1) {
+ scsi_device_put(sdev1);
+ }
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ doscan = 0;
+ break;
+ case MR_EVT_LD_CREATED:
+ megasas_get_ld_list(instance);
+ for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+ ld_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 = scsi_device_lookup(host,
+ i+MEGASAS_MAX_LD_CHANNELS,
+ j, 0);
+
+ if (instance->ld_ids[ld_index] !=
+ 0xff) {
+ if (!sdev1) {
+ scsi_add_device(host,
+ i + 2,
+ j, 0);
+ }
+ }
+ if (sdev1) {
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ doscan = 0;
+ break;
case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
+ case MR_EVT_FOREIGN_CFG_IMPORTED:
doscan = 1;
break;
default:
@@ -4007,6 +4124,31 @@ megasas_aen_polling(struct work_struct *work)
}
}
}
+
+ megasas_get_ld_list(instance);
+ for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
+ for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
+ ld_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 = scsi_device_lookup(host,
+ i+MEGASAS_MAX_LD_CHANNELS, j, 0);
+ if (instance->ld_ids[ld_index] != 0xff) {
+ if (!sdev1) {
+ scsi_add_device(host,
+ i+2,
+ j, 0);
+ } else {
+ scsi_device_put(sdev1);
+ }
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
}
if ( instance->aen_cmd != NULL ) {
--
1.7.10.rc1
From: "Yang, Bo" <Bo.Yang@lsi.com>
Date: Tue, 6 Oct 2009 14:43:28 -0600
Subject: [SCSI] megaraid_sas: add the IEEE SGE support to SAS2 controller
commit f4c9a1317d32bb0af7546ef0c1dcc3be52dc8d0a upstream.
To increase the performance, megaraid sas driver added the IEEE SGE
support to support SAS2 controller.
Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas.c | 80 +++++++++++++++++++++++++++++++---
drivers/scsi/megaraid/megaraid_sas.h | 9 ++++
2 files changed, 82 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index c7e1e40ad24a..2b9e3c68c3e7 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -712,6 +712,35 @@ megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd *scp,
return sge_count;
}
+/**
+ * megasas_make_sgl_skinny - Prepares IEEE SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @mfi_sgl: SGL to be filled in
+ *
+ * If successful, this function returns the number of SG elements. Otherwise,
+ * it returnes -1.
+ */
+static int
+megasas_make_sgl_skinny(struct megasas_instance *instance,
+ struct scsi_cmnd *scp, union megasas_sgl *mfi_sgl)
+{
+ int i;
+ int sge_count;
+ struct scatterlist *os_sgl;
+
+ sge_count = scsi_dma_map(scp);
+
+ if (sge_count) {
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ mfi_sgl->sge_skinny[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge_skinny[i].phys_addr =
+ sg_dma_address(os_sgl);
+ }
+ }
+ return sge_count;
+}
+
/**
* megasas_get_frame_count - Computes the number of frames
* @frame_type : type of frame- io or pthru frame
@@ -720,7 +749,8 @@ megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd *scp,
* Returns the number of frames required for numnber of sge's (sge_count)
*/
-static u32 megasas_get_frame_count(u8 sge_count, u8 frame_type)
+static u32 megasas_get_frame_count(struct megasas_instance *instance,
+ u8 sge_count, u8 frame_type)
{
int num_cnt;
int sge_bytes;
@@ -730,6 +760,10 @@ static u32 megasas_get_frame_count(u8 sge_count, u8 frame_type)
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
/*
* Main frame can contain 2 SGEs for 64-bit SGLs and
* 3 SGEs for 32-bit SGLs for ldio &
@@ -737,12 +771,16 @@ static u32 megasas_get_frame_count(u8 sge_count, u8 frame_type)
* 2 SGEs for 32-bit SGLs for pthru frame
*/
if (unlikely(frame_type == PTHRU_FRAME)) {
- if (IS_DMA64)
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
num_cnt = sge_count - 1;
else
num_cnt = sge_count - 2;
} else {
- if (IS_DMA64)
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
num_cnt = sge_count - 2;
else
num_cnt = sge_count - 3;
@@ -791,6 +829,10 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
else if (scp->sc_data_direction == PCI_DMA_NONE)
flags = MFI_FRAME_DIR_NONE;
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
/*
* Prepare the DCDB frame
*/
@@ -809,7 +851,11 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
/*
* Construct SGL
*/
- if (IS_DMA64) {
+ if (instance->flag_ieee == 1) {
+ pthru->flags |= MFI_FRAME_SGL64;
+ pthru->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &pthru->sgl);
+ } else if (IS_DMA64) {
pthru->flags |= MFI_FRAME_SGL64;
pthru->sge_count = megasas_make_sgl64(instance, scp,
&pthru->sgl);
@@ -834,7 +880,7 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
- cmd->frame_count = megasas_get_frame_count(pthru->sge_count,
+ cmd->frame_count = megasas_get_frame_count(instance, pthru->sge_count,
PTHRU_FRAME);
return cmd->frame_count;
@@ -865,6 +911,10 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
flags = MFI_FRAME_DIR_READ;
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
/*
* Prepare the Logical IO frame: 2nd bit is zero for all read cmds
*/
@@ -935,7 +985,11 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
/*
* Construct SGL
*/
- if (IS_DMA64) {
+ if (instance->flag_ieee) {
+ ldio->flags |= MFI_FRAME_SGL64;
+ ldio->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &ldio->sgl);
+ } else if (IS_DMA64) {
ldio->flags |= MFI_FRAME_SGL64;
ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
} else
@@ -958,7 +1012,8 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
- cmd->frame_count = megasas_get_frame_count(ldio->sge_count, IO_FRAME);
+ cmd->frame_count = megasas_get_frame_count(instance,
+ ldio->sge_count, IO_FRAME);
return cmd->frame_count;
}
@@ -1918,6 +1973,10 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
/*
* Calculated the number of 64byte frames required for SGL
*/
@@ -2797,6 +2856,11 @@ megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
dcmd->sgl.sge32[0].phys_addr = (u32) instance->evt_detail_h;
dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_detail);
+ if (instance->aen_cmd != NULL) {
+ megasas_return_cmd(instance, cmd);
+ return 0;
+ }
+
/*
* Store reference to the cmd used to register for AEN. When an
* application wants us to register for AEN, we have to abort this
@@ -2968,6 +3032,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
*instance->producer = 0;
*instance->consumer = 0;
megasas_poll_wait_aen = 0;
+ instance->flag_ieee = 0;
instance->ev = NULL;
instance->evt_detail = pci_alloc_consistent(pdev,
@@ -3008,6 +3073,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ instance->flag_ieee = 1;
sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
} else
sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 29cd2c877952..a22d8d48b7dd 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -96,6 +96,7 @@
#define MFI_FRAME_DIR_WRITE 0x0008
#define MFI_FRAME_DIR_READ 0x0010
#define MFI_FRAME_DIR_BOTH 0x0018
+#define MFI_FRAME_IEEE 0x0020
/*
* Definition for cmd_status
@@ -772,10 +773,17 @@ struct megasas_sge64 {
} __attribute__ ((packed));
+struct megasas_sge_skinny {
+ u64 phys_addr;
+ u32 length;
+ u32 flag;
+} __packed;
+
union megasas_sgl {
struct megasas_sge32 sge32[1];
struct megasas_sge64 sge64[1];
+ struct megasas_sge_skinny sge_skinny[1];
} __attribute__ ((packed));
@@ -1248,6 +1256,7 @@ struct megasas_instance {
u8 flag;
u8 unload;
+ u8 flag_ieee;
unsigned long last_time;
struct timer_list io_completion_timer;
--
1.7.10.rc1
From: bo yang <boyang1288@gmail.com>
Date: Wed, 22 Sep 2010 22:36:29 -0400
Subject: [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive
commit 39a985547cbfcbb0b23667b69b8ae82a6cf312ac upstream.
To add the Online controller reset support, driver need to do:
a). reset the controller chips -- Xscale and Gen2 which will change
the function calls and add the reset function related to this two
chips.
b). during the reset, driver will store the pending cmds which not
returned by FW to driver's pending queue. Driver will re-issue those
pending cmds again to FW after the OCR finished.
c). In driver's timeout routine, driver will report to OS as reset.
Also driver's queue routine will block the cmds until the OCR
finished.
d). in Driver's ISR routine, if driver get the FW state as state
change, FW in Failure status and FW support online controller
reset (OCR), driver will start to do the controller reset.
e). In driver's IOCTL routine, the application cmds will wait for the
OCR to finish, then issue the cmds to FW.
Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas.c | 756 +++++++++++++++++++++++++++++++---
drivers/scsi/megaraid/megaraid_sas.h | 88 +++-
2 files changed, 787 insertions(+), 57 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 2b9e3c68c3e7..72c925d9e0f3 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -61,6 +61,11 @@ MODULE_VERSION(MEGASAS_VERSION);
MODULE_AUTHOR("megaraidlinux@lsi.com");
MODULE_DESCRIPTION("LSI MegaRAID SAS Driver");
+static int megasas_transition_to_ready(struct megasas_instance *instance);
+static int megasas_get_pd_list(struct megasas_instance *instance);
+static int megasas_issue_init_mfi(struct megasas_instance *instance);
+static int megasas_register_aen(struct megasas_instance *instance,
+ u32 seq_num, u32 class_locale_word);
/*
* PCI ID table for all supported controllers
*/
@@ -163,7 +168,7 @@ megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
static inline void
megasas_enable_intr_xscale(struct megasas_register_set __iomem * regs)
{
- writel(1, &(regs)->outbound_intr_mask);
+ writel(0, &(regs)->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(®s->outbound_intr_mask);
@@ -199,24 +204,27 @@ static int
megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
{
u32 status;
+ u32 mfiStatus = 0;
/*
* Check if it is our interrupt
*/
status = readl(®s->outbound_intr_status);
- if (!(status & MFI_OB_INTR_STATUS_MASK)) {
- return 1;
- }
+ if (status & MFI_OB_INTR_STATUS_MASK)
+ mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
+ if (status & MFI_XSCALE_OMR0_CHANGE_INTERRUPT)
+ mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
/*
* Clear the interrupt by writing back the same value
*/
- writel(status, ®s->outbound_intr_status);
+ if (mfiStatus)
+ writel(status, ®s->outbound_intr_status);
/* Dummy readl to force pci flush */
readl(®s->outbound_intr_status);
- return 0;
+ return mfiStatus;
}
/**
@@ -231,8 +239,69 @@ megasas_fire_cmd_xscale(struct megasas_instance *instance,
u32 frame_count,
struct megasas_register_set __iomem *regs)
{
+ unsigned long flags;
+ spin_lock_irqsave(&instance->hba_lock, flags);
writel((frame_phys_addr >> 3)|(frame_count),
&(regs)->inbound_queue_port);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+}
+
+/**
+ * megasas_adp_reset_xscale - For controller reset
+ * @regs: MFI register set
+ */
+static int
+megasas_adp_reset_xscale(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ u32 i;
+ u32 pcidata;
+ writel(MFI_ADP_RESET, ®s->inbound_doorbell);
+
+ for (i = 0; i < 3; i++)
+ msleep(1000); /* sleep for 3 secs */
+ pcidata = 0;
+ pci_read_config_dword(instance->pdev, MFI_1068_PCSR_OFFSET, &pcidata);
+ printk(KERN_NOTICE "pcidata = %x\n", pcidata);
+ if (pcidata & 0x2) {
+ printk(KERN_NOTICE "mfi 1068 offset read=%x\n", pcidata);
+ pcidata &= ~0x2;
+ pci_write_config_dword(instance->pdev,
+ MFI_1068_PCSR_OFFSET, pcidata);
+
+ for (i = 0; i < 2; i++)
+ msleep(1000); /* need to wait 2 secs again */
+
+ pcidata = 0;
+ pci_read_config_dword(instance->pdev,
+ MFI_1068_FW_HANDSHAKE_OFFSET, &pcidata);
+ printk(KERN_NOTICE "1068 offset handshake read=%x\n", pcidata);
+ if ((pcidata & 0xffff0000) == MFI_1068_FW_READY) {
+ printk(KERN_NOTICE "1068 offset pcidt=%x\n", pcidata);
+ pcidata = 0;
+ pci_write_config_dword(instance->pdev,
+ MFI_1068_FW_HANDSHAKE_OFFSET, pcidata);
+ }
+ }
+ return 0;
+}
+
+/**
+ * megasas_check_reset_xscale - For controller reset check
+ * @regs: MFI register set
+ */
+static int
+megasas_check_reset_xscale(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ u32 consumer;
+ consumer = *instance->consumer;
+
+ if ((instance->adprecovery != MEGASAS_HBA_OPERATIONAL) &&
+ (*instance->consumer == MEGASAS_ADPRESET_INPROG_SIGN)) {
+ return 1;
+ }
+ return 0;
}
static struct megasas_instance_template megasas_instance_template_xscale = {
@@ -242,6 +311,8 @@ static struct megasas_instance_template megasas_instance_template_xscale = {
.disable_intr = megasas_disable_intr_xscale,
.clear_intr = megasas_clear_intr_xscale,
.read_fw_status_reg = megasas_read_fw_status_reg_xscale,
+ .adp_reset = megasas_adp_reset_xscale,
+ .check_reset = megasas_check_reset_xscale,
};
/**
@@ -263,7 +334,7 @@ megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs)
{
writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
- writel(~0x80000004, &(regs)->outbound_intr_mask);
+ writel(~0x80000000, &(regs)->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(®s->outbound_intr_mask);
@@ -306,7 +377,7 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
status = readl(®s->outbound_intr_status);
if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) {
- return 1;
+ return 0;
}
/*
@@ -317,7 +388,7 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
/* Dummy readl to force pci flush */
readl(®s->outbound_doorbell_clear);
- return 0;
+ return 1;
}
/**
* megasas_fire_cmd_ppc - Sends command to the FW
@@ -331,10 +402,34 @@ megasas_fire_cmd_ppc(struct megasas_instance *instance,
u32 frame_count,
struct megasas_register_set __iomem *regs)
{
+ unsigned long flags;
+ spin_lock_irqsave(&instance->hba_lock, flags);
writel((frame_phys_addr | (frame_count<<1))|1,
&(regs)->inbound_queue_port);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
}
+/**
+ * megasas_adp_reset_ppc - For controller reset
+ * @regs: MFI register set
+ */
+static int
+megasas_adp_reset_ppc(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
+
+/**
+ * megasas_check_reset_ppc - For controller reset check
+ * @regs: MFI register set
+ */
+static int
+megasas_check_reset_ppc(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
static struct megasas_instance_template megasas_instance_template_ppc = {
.fire_cmd = megasas_fire_cmd_ppc,
@@ -342,6 +437,8 @@ static struct megasas_instance_template megasas_instance_template_ppc = {
.disable_intr = megasas_disable_intr_ppc,
.clear_intr = megasas_clear_intr_ppc,
.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
+ .adp_reset = megasas_adp_reset_ppc,
+ .check_reset = megasas_check_reset_ppc,
};
/**
@@ -396,7 +493,7 @@ megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
status = readl(®s->outbound_intr_status);
if (!(status & MFI_SKINNY_ENABLE_INTERRUPT_MASK)) {
- return 1;
+ return 0;
}
/*
@@ -409,7 +506,7 @@ megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
*/
readl(®s->outbound_intr_status);
- return 0;
+ return 1;
}
/**
@@ -425,11 +522,33 @@ megasas_fire_cmd_skinny(struct megasas_instance *instance,
struct megasas_register_set __iomem *regs)
{
unsigned long flags;
- spin_lock_irqsave(&instance->fire_lock, flags);
+ spin_lock_irqsave(&instance->hba_lock, flags);
writel(0, &(regs)->inbound_high_queue_port);
writel((frame_phys_addr | (frame_count<<1))|1,
&(regs)->inbound_low_queue_port);
- spin_unlock_irqrestore(&instance->fire_lock, flags);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+}
+
+/**
+ * megasas_adp_reset_skinny - For controller reset
+ * @regs: MFI register set
+ */
+static int
+megasas_adp_reset_skinny(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
+
+/**
+ * megasas_check_reset_skinny - For controller reset check
+ * @regs: MFI register set
+ */
+static int
+megasas_check_reset_skinny(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
}
static struct megasas_instance_template megasas_instance_template_skinny = {
@@ -439,6 +558,8 @@ static struct megasas_instance_template megasas_instance_template_skinny = {
.disable_intr = megasas_disable_intr_skinny,
.clear_intr = megasas_clear_intr_skinny,
.read_fw_status_reg = megasas_read_fw_status_reg_skinny,
+ .adp_reset = megasas_adp_reset_skinny,
+ .check_reset = megasas_check_reset_skinny,
};
@@ -494,23 +615,29 @@ static int
megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
{
u32 status;
+ u32 mfiStatus = 0;
/*
* Check if it is our interrupt
*/
status = readl(®s->outbound_intr_status);
- if (!(status & MFI_GEN2_ENABLE_INTERRUPT_MASK))
- return 1;
+ if (status & MFI_GEN2_ENABLE_INTERRUPT_MASK) {
+ mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
+ }
+ if (status & MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT) {
+ mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
+ }
/*
* Clear the interrupt by writing back the same value
*/
- writel(status, ®s->outbound_doorbell_clear);
+ if (mfiStatus)
+ writel(status, ®s->outbound_doorbell_clear);
/* Dummy readl to force pci flush */
readl(®s->outbound_intr_status);
- return 0;
+ return mfiStatus;
}
/**
* megasas_fire_cmd_gen2 - Sends command to the FW
@@ -524,8 +651,74 @@ megasas_fire_cmd_gen2(struct megasas_instance *instance,
u32 frame_count,
struct megasas_register_set __iomem *regs)
{
+ unsigned long flags;
+ spin_lock_irqsave(&instance->hba_lock, flags);
writel((frame_phys_addr | (frame_count<<1))|1,
&(regs)->inbound_queue_port);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+}
+
+/**
+ * megasas_adp_reset_gen2 - For controller reset
+ * @regs: MFI register set
+ */
+static int
+megasas_adp_reset_gen2(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *reg_set)
+{
+ u32 retry = 0 ;
+ u32 HostDiag;
+
+ writel(0, ®_set->seq_offset);
+ writel(4, ®_set->seq_offset);
+ writel(0xb, ®_set->seq_offset);
+ writel(2, ®_set->seq_offset);
+ writel(7, ®_set->seq_offset);
+ writel(0xd, ®_set->seq_offset);
+ msleep(1000);
+
+ HostDiag = (u32)readl(®_set->host_diag);
+
+ while ( !( HostDiag & DIAG_WRITE_ENABLE) ) {
+ msleep(100);
+ HostDiag = (u32)readl(®_set->host_diag);
+ printk(KERN_NOTICE "RESETGEN2: retry=%x, hostdiag=%x\n",
+ retry, HostDiag);
+
+ if (retry++ >= 100)
+ return 1;
+
+ }
+
+ printk(KERN_NOTICE "ADP_RESET_GEN2: HostDiag=%x\n", HostDiag);
+
+ writel((HostDiag | DIAG_RESET_ADAPTER), ®_set->host_diag);
+
+ ssleep(10);
+
+ HostDiag = (u32)readl(®_set->host_diag);
+ while ( ( HostDiag & DIAG_RESET_ADAPTER) ) {
+ msleep(100);
+ HostDiag = (u32)readl(®_set->host_diag);
+ printk(KERN_NOTICE "RESET_GEN2: retry=%x, hostdiag=%x\n",
+ retry, HostDiag);
+
+ if (retry++ >= 1000)
+ return 1;
+
+ }
+ return 0;
+}
+
+/**
+ * megasas_check_reset_gen2 - For controller reset check
+ * @regs: MFI register set
+ */
+static int
+megasas_check_reset_gen2(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
}
static struct megasas_instance_template megasas_instance_template_gen2 = {
@@ -535,11 +728,13 @@ static struct megasas_instance_template megasas_instance_template_gen2 = {
.disable_intr = megasas_disable_intr_gen2,
.clear_intr = megasas_clear_intr_gen2,
.read_fw_status_reg = megasas_read_fw_status_reg_gen2,
+ .adp_reset = megasas_adp_reset_gen2,
+ .check_reset = megasas_check_reset_gen2,
};
/**
* This is the end of set of functions & definitions
-* specific to ppc (deviceid : 0x60) controllers
+* specific to gen2 (deviceid : 0x78, 0x79) controllers
*/
/**
@@ -598,8 +793,7 @@ megasas_issue_blocked_cmd(struct megasas_instance *instance,
instance->instancet->fire_cmd(instance,
cmd->frame_phys_addr, 0, instance->reg_set);
- wait_event_timeout(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA),
- MEGASAS_INTERNAL_CMD_WAIT_TIME*HZ);
+ wait_event(instance->int_cmd_wait_q, cmd->cmd_status != ENODATA);
return 0;
}
@@ -647,8 +841,8 @@ megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
/*
* Wait for this cmd to complete
*/
- wait_event_timeout(instance->abort_cmd_wait_q, (cmd->cmd_status != 0xFF),
- MEGASAS_INTERNAL_CMD_WAIT_TIME*HZ);
+ wait_event(instance->abort_cmd_wait_q, cmd->cmd_status != 0xFF);
+ cmd->sync_cmd = 0;
megasas_return_cmd(instance, cmd);
return 0;
@@ -1118,14 +1312,22 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
u32 frame_count;
struct megasas_cmd *cmd;
struct megasas_instance *instance;
+ unsigned long flags;
instance = (struct megasas_instance *)
scmd->device->host->hostdata;
- /* Don't process if we have already declared adapter dead */
- if (instance->hw_crit_error)
+ if (instance->issuepend_done == 0)
return SCSI_MLQUEUE_HOST_BUSY;
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
scmd->scsi_done = done;
scmd->result = 0;
@@ -1209,6 +1411,18 @@ static int megasas_slave_configure(struct scsi_device *sdev)
return 0;
}
+static void megaraid_sas_kill_hba(struct megasas_instance *instance)
+{
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->reserved_0[0]);
+ } else {
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->inbound_doorbell);
+ }
+}
+
/**
* megasas_complete_cmd_dpc - Returns FW's controller structure
* @instance_addr: Address of adapter soft state
@@ -1226,7 +1440,7 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr)
unsigned long flags;
/* If we have already declared adapter dead, donot complete cmds */
- if (instance->hw_crit_error)
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR )
return;
spin_lock_irqsave(&instance->completion_lock, flags);
@@ -1236,6 +1450,11 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr)
while (consumer != producer) {
context = instance->reply_queue[consumer];
+ if (context >= instance->max_fw_cmds) {
+ printk(KERN_ERR "Unexpected context value %x\n",
+ context);
+ BUG();
+ }
cmd = instance->cmd_list[context];
@@ -1285,7 +1504,76 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr)
static int megasas_wait_for_outstanding(struct megasas_instance *instance)
{
int i;
+ u32 reset_index;
u32 wait_time = MEGASAS_RESET_WAIT_TIME;
+ u8 adprecovery;
+ unsigned long flags;
+ struct list_head clist_local;
+ struct megasas_cmd *reset_cmd;
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ adprecovery = instance->adprecovery;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ if (adprecovery != MEGASAS_HBA_OPERATIONAL) {
+
+ INIT_LIST_HEAD(&clist_local);
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ list_splice_init(&instance->internal_reset_pending_q,
+ &clist_local);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ printk(KERN_NOTICE "megasas: HBA reset wait ...\n");
+ for (i = 0; i < wait_time; i++) {
+ msleep(1000);
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ adprecovery = instance->adprecovery;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ if (adprecovery == MEGASAS_HBA_OPERATIONAL)
+ break;
+ }
+
+ if (adprecovery != MEGASAS_HBA_OPERATIONAL) {
+ printk(KERN_NOTICE "megasas: reset: Stopping HBA.\n");
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ return FAILED;
+ }
+
+ reset_index = 0;
+ while (!list_empty(&clist_local)) {
+ reset_cmd = list_entry((&clist_local)->next,
+ struct megasas_cmd, list);
+ list_del_init(&reset_cmd->list);
+ if (reset_cmd->scmd) {
+ reset_cmd->scmd->result = DID_RESET << 16;
+ printk(KERN_NOTICE "%d:%p reset [%02x], %#lx\n",
+ reset_index, reset_cmd,
+ reset_cmd->scmd->cmnd[0],
+ reset_cmd->scmd->serial_number);
+
+ reset_cmd->scmd->scsi_done(reset_cmd->scmd);
+ megasas_return_cmd(instance, reset_cmd);
+ } else if (reset_cmd->sync_cmd) {
+ printk(KERN_NOTICE "megasas:%p synch cmds"
+ "reset queue\n",
+ reset_cmd);
+
+ reset_cmd->cmd_status = ENODATA;
+ instance->instancet->fire_cmd(instance,
+ reset_cmd->frame_phys_addr,
+ 0, instance->reg_set);
+ } else {
+ printk(KERN_NOTICE "megasas: %p unexpected"
+ "cmds lst\n",
+ reset_cmd);
+ }
+ reset_index++;
+ }
+
+ return SUCCESS;
+ }
for (i = 0; i < wait_time; i++) {
@@ -1308,6 +1596,7 @@ static int megasas_wait_for_outstanding(struct megasas_instance *instance)
}
if (atomic_read(&instance->fw_outstanding)) {
+ printk(KERN_NOTICE "megaraid_sas: pending cmds after reset\n");
/*
* Send signal to FW to stop processing any pending cmds.
* The controller will be taken offline by the OS now.
@@ -1323,10 +1612,14 @@ static int megasas_wait_for_outstanding(struct megasas_instance *instance)
&instance->reg_set->inbound_doorbell);
}
megasas_dump_pending_frames(instance);
- instance->hw_crit_error = 1;
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
return FAILED;
}
+ printk(KERN_NOTICE "megaraid_sas: no pending cmds after reset\n");
+
return SUCCESS;
}
@@ -1348,7 +1641,7 @@ static int megasas_generic_reset(struct scsi_cmnd *scmd)
scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x retries=%x\n",
scmd->serial_number, scmd->cmnd[0], scmd->retries);
- if (instance->hw_crit_error) {
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
printk(KERN_ERR "megasas: cannot recover from previous reset "
"failures\n");
return FAILED;
@@ -1503,7 +1796,8 @@ megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd)
instance->aen_cmd = NULL;
megasas_return_cmd(instance, cmd);
- if (instance->unload == 0) {
+ if ((instance->unload == 0) &&
+ ((instance->issuepend_done == 1))) {
struct megasas_aen_event *ev;
ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
@@ -1597,6 +1891,9 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
struct megasas_header *hdr = &cmd->frame->hdr;
unsigned long flags;
+ /* flag for the retry reset */
+ cmd->retry_for_fw_reset = 0;
+
if (cmd->scmd)
cmd->scmd->SCp.ptr = NULL;
@@ -1717,39 +2014,301 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
}
/**
+ * megasas_issue_pending_cmds_again - issue all pending cmds
+ * in FW again because of the fw reset
+ * @instance: Adapter soft state
+ */
+static inline void
+megasas_issue_pending_cmds_again(struct megasas_instance *instance)
+{
+ struct megasas_cmd *cmd;
+ struct list_head clist_local;
+ union megasas_evt_class_locale class_locale;
+ unsigned long flags;
+ u32 seq_num;
+
+ INIT_LIST_HEAD(&clist_local);
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ list_splice_init(&instance->internal_reset_pending_q, &clist_local);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ while (!list_empty(&clist_local)) {
+ cmd = list_entry((&clist_local)->next,
+ struct megasas_cmd, list);
+ list_del_init(&cmd->list);
+
+ if (cmd->sync_cmd || cmd->scmd) {
+ printk(KERN_NOTICE "megaraid_sas: command %p, %p:%d"
+ "detected to be pending while HBA reset.\n",
+ cmd, cmd->scmd, cmd->sync_cmd);
+
+ cmd->retry_for_fw_reset++;
+
+ if (cmd->retry_for_fw_reset == 3) {
+ printk(KERN_NOTICE "megaraid_sas: cmd %p, %p:%d"
+ "was tried multiple times during reset."
+ "Shutting down the HBA\n",
+ cmd, cmd->scmd, cmd->sync_cmd);
+ megaraid_sas_kill_hba(instance);
+
+ instance->adprecovery =
+ MEGASAS_HW_CRITICAL_ERROR;
+ return;
+ }
+ }
+
+ if (cmd->sync_cmd == 1) {
+ if (cmd->scmd) {
+ printk(KERN_NOTICE "megaraid_sas: unexpected"
+ "cmd attached to internal command!\n");
+ }
+ printk(KERN_NOTICE "megasas: %p synchronous cmd"
+ "on the internal reset queue,"
+ "issue it again.\n", cmd);
+ cmd->cmd_status = ENODATA;
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr ,
+ 0, instance->reg_set);
+ } else if (cmd->scmd) {
+ printk(KERN_NOTICE "megasas: %p scsi cmd [%02x],%#lx"
+ "detected on the internal queue, issue again.\n",
+ cmd, cmd->scmd->cmnd[0], cmd->scmd->serial_number);
+
+ atomic_inc(&instance->fw_outstanding);
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr,
+ cmd->frame_count-1, instance->reg_set);
+ } else {
+ printk(KERN_NOTICE "megasas: %p unexpected cmd on the"
+ "internal reset defer list while re-issue!!\n",
+ cmd);
+ }
+ }
+
+ if (instance->aen_cmd) {
+ printk(KERN_NOTICE "megaraid_sas: aen_cmd in def process\n");
+ megasas_return_cmd(instance, instance->aen_cmd);
+
+ instance->aen_cmd = NULL;
+ }
+
+ /*
+ * Initiate AEN (Asynchronous Event Notification)
+ */
+ seq_num = instance->last_seq_num;
+ class_locale.members.reserved = 0;
+ class_locale.members.locale = MR_EVT_LOCALE_ALL;
+ class_locale.members.class = MR_EVT_CLASS_DEBUG;
+
+ megasas_register_aen(instance, seq_num, class_locale.word);
+}
+
+/**
+ * Move the internal reset pending commands to a deferred queue.
+ *
+ * We move the commands pending at internal reset time to a
+ * pending queue. This queue would be flushed after successful
+ * completion of the internal reset sequence. if the internal reset
+ * did not complete in time, the kernel reset handler would flush
+ * these commands.
+ **/
+static void
+megasas_internal_reset_defer_cmds(struct megasas_instance *instance)
+{
+ struct megasas_cmd *cmd;
+ int i;
+ u32 max_cmd = instance->max_fw_cmds;
+ u32 defer_index;
+ unsigned long flags;
+
+ defer_index = 0;
+ spin_lock_irqsave(&instance->cmd_pool_lock, flags);
+ for (i = 0; i < max_cmd; i++) {
+ cmd = instance->cmd_list[i];
+ if (cmd->sync_cmd == 1 || cmd->scmd) {
+ printk(KERN_NOTICE "megasas: moving cmd[%d]:%p:%d:%p"
+ "on the defer queue as internal\n",
+ defer_index, cmd, cmd->sync_cmd, cmd->scmd);
+
+ if (!list_empty(&cmd->list)) {
+ printk(KERN_NOTICE "megaraid_sas: ERROR while"
+ " moving this cmd:%p, %d %p, it was"
+ "discovered on some list?\n",
+ cmd, cmd->sync_cmd, cmd->scmd);
+
+ list_del_init(&cmd->list);
+ }
+ defer_index++;
+ list_add_tail(&cmd->list,
+ &instance->internal_reset_pending_q);
+ }
+ }
+ spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
+}
+
+
+static void
+process_fw_state_change_wq(struct work_struct *work)
+{
+ struct megasas_instance *instance =
+ container_of(work, struct megasas_instance, work_init);
+ u32 wait;
+ unsigned long flags;
+
+ if (instance->adprecovery != MEGASAS_ADPRESET_SM_INFAULT) {
+ printk(KERN_NOTICE "megaraid_sas: error, recovery st %x \n",
+ instance->adprecovery);
+ return ;
+ }
+
+ if (instance->adprecovery == MEGASAS_ADPRESET_SM_INFAULT) {
+ printk(KERN_NOTICE "megaraid_sas: FW detected to be in fault"
+ "state, restarting it...\n");
+
+ instance->instancet->disable_intr(instance->reg_set);
+ atomic_set(&instance->fw_outstanding, 0);
+
+ atomic_set(&instance->fw_reset_no_pci_access, 1);
+ instance->instancet->adp_reset(instance, instance->reg_set);
+ atomic_set(&instance->fw_reset_no_pci_access, 0 );
+
+ printk(KERN_NOTICE "megaraid_sas: FW restarted successfully,"
+ "initiating next stage...\n");
+
+ printk(KERN_NOTICE "megaraid_sas: HBA recovery state machine,"
+ "state 2 starting...\n");
+
+ /*waitting for about 20 second before start the second init*/
+ for (wait = 0; wait < 30; wait++) {
+ msleep(1000);
+ }
+
+ if (megasas_transition_to_ready(instance)) {
+ printk(KERN_NOTICE "megaraid_sas:adapter not ready\n");
+
+ megaraid_sas_kill_hba(instance);
+ instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+ return ;
+ }
+
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1064R) ||
+ (instance->pdev->device == PCI_DEVICE_ID_DELL_PERC5) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_VERDE_ZCR)
+ ) {
+ *instance->consumer = *instance->producer;
+ } else {
+ *instance->consumer = 0;
+ *instance->producer = 0;
+ }
+
+ megasas_issue_init_mfi(instance);
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ instance->instancet->enable_intr(instance->reg_set);
+
+ megasas_issue_pending_cmds_again(instance);
+ instance->issuepend_done = 1;
+ }
+ return ;
+}
+
+/**
* megasas_deplete_reply_queue - Processes all completed commands
* @instance: Adapter soft state
* @alt_status: Alternate status to be returned to
* SCSI mid-layer instead of the status
* returned by the FW
+ * Note: this must be called with hba lock held
*/
static int
-megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status)
+megasas_deplete_reply_queue(struct megasas_instance *instance,
+ u8 alt_status)
{
- /*
- * Check if it is our interrupt
- * Clear the interrupt
- */
- if(instance->instancet->clear_intr(instance->reg_set))
+ u32 mfiStatus;
+ u32 fw_state;
+
+ if ((mfiStatus = instance->instancet->check_reset(instance,
+ instance->reg_set)) == 1) {
+ return IRQ_HANDLED;
+ }
+
+ if ((mfiStatus = instance->instancet->clear_intr(
+ instance->reg_set)
+ ) == 0) {
return IRQ_NONE;
+ }
+
+ instance->mfiStatus = mfiStatus;
+
+ if ((mfiStatus & MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE)) {
+ fw_state = instance->instancet->read_fw_status_reg(
+ instance->reg_set) & MFI_STATE_MASK;
+
+ if (fw_state != MFI_STATE_FAULT) {
+ printk(KERN_NOTICE "megaraid_sas: fw state:%x\n",
+ fw_state);
+ }
+
+ if ((fw_state == MFI_STATE_FAULT) &&
+ (instance->disableOnlineCtrlReset == 0)) {
+ printk(KERN_NOTICE "megaraid_sas: wait adp restart\n");
+
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS1064R) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_DELL_PERC5) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_VERDE_ZCR)) {
+
+ *instance->consumer =
+ MEGASAS_ADPRESET_INPROG_SIGN;
+ }
+
+
+ instance->instancet->disable_intr(instance->reg_set);
+ instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT;
+ instance->issuepend_done = 0;
+
+ atomic_set(&instance->fw_outstanding, 0);
+ megasas_internal_reset_defer_cmds(instance);
+
+ printk(KERN_NOTICE "megasas: fwState=%x, stage:%d\n",
+ fw_state, instance->adprecovery);
+
+ schedule_work(&instance->work_init);
+ return IRQ_HANDLED;
+
+ } else {
+ printk(KERN_NOTICE "megasas: fwstate:%x, dis_OCR=%x\n",
+ fw_state, instance->disableOnlineCtrlReset);
+ }
+ }
- if (instance->hw_crit_error)
- goto out_done;
- /*
- * Schedule the tasklet for cmd completion
- */
tasklet_schedule(&instance->isr_tasklet);
-out_done:
return IRQ_HANDLED;
}
-
/**
* megasas_isr - isr entry point
*/
static irqreturn_t megasas_isr(int irq, void *devp)
{
- return megasas_deplete_reply_queue((struct megasas_instance *)devp,
- DID_OK);
+ struct megasas_instance *instance;
+ unsigned long flags;
+ irqreturn_t rc;
+
+ if (atomic_read(
+ &(((struct megasas_instance *)devp)->fw_reset_no_pci_access)))
+ return IRQ_HANDLED;
+
+ instance = (struct megasas_instance *)devp;
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ rc = megasas_deplete_reply_queue(instance, DID_OK);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ return rc;
}
/**
@@ -1900,7 +2459,7 @@ megasas_transition_to_ready(struct megasas_instance* instance)
"in %d secs\n", fw_state, max_wait);
return -ENODEV;
}
- };
+ }
printk(KERN_INFO "megasas: FW now in Ready state\n");
return 0;
@@ -1982,6 +2541,7 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
*/
sgl_sz = sge_sz * instance->max_num_sge;
frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE - 1) / MEGAMFI_FRAME_SIZE;
+ frame_count = 15;
/*
* We need one extra frame for the MFI command
@@ -2129,6 +2689,7 @@ static int megasas_alloc_cmds(struct megasas_instance *instance)
cmd = instance->cmd_list[i];
memset(cmd, 0, sizeof(struct megasas_cmd));
cmd->index = i;
+ cmd->scmd = NULL;
cmd->instance = instance;
list_add_tail(&cmd->list, &instance->cmd_pool);
@@ -2295,7 +2856,7 @@ megasas_get_ld_list(struct megasas_instance *instance)
/* the following function will get the instance PD LIST */
- if ((ret == 0) && (ci->ldCount < MAX_LOGICAL_DRIVES)) {
+ if ((ret == 0) && (ci->ldCount <= MAX_LOGICAL_DRIVES)) {
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
for (ld_index = 0; ld_index < ci->ldCount; ld_index++) {
@@ -2606,6 +3167,21 @@ static int megasas_init_mfi(struct megasas_instance *instance)
if (megasas_issue_init_mfi(instance))
goto fail_fw_init;
+ instance->fw_support_ieee = 0;
+ instance->fw_support_ieee =
+ (instance->instancet->read_fw_status_reg(reg_set) &
+ 0x04000000);
+
+ printk(KERN_NOTICE "megasas_init_mfi: fw_support_ieee=%d",
+ instance->fw_support_ieee);
+
+ if (instance->fw_support_ieee)
+ instance->flag_ieee = 1;
+
+ /** for passthrough
+ * the following function will get the PD LIST.
+ */
+
memset(instance->pd_list, 0 ,
(MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)));
megasas_get_pd_list(instance);
@@ -2632,6 +3208,8 @@ static int megasas_init_mfi(struct megasas_instance *instance)
max_sectors_2 = ctrl_info->max_request_size;
tmp_sectors = min_t(u32, max_sectors_1 , max_sectors_2);
+ instance->disableOnlineCtrlReset =
+ ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
}
instance->max_sectors_per_req = instance->max_num_sge *
@@ -2849,6 +3427,7 @@ megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
dcmd->sge_count = 1;
dcmd->flags = MFI_FRAME_DIR_READ;
dcmd->timeout = 0;
+ instance->last_seq_num = seq_num;
dcmd->data_xfer_len = sizeof(struct megasas_evt_detail);
dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT;
dcmd->mbox.w[0] = seq_num;
@@ -3017,6 +3596,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
instance = (struct megasas_instance *)host->hostdata;
memset(instance, 0, sizeof(*instance));
+ atomic_set( &instance->fw_reset_no_pci_access, 0 );
instance->producer = pci_alloc_consistent(pdev, sizeof(u32),
&instance->producer_h);
@@ -3034,6 +3614,9 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
megasas_poll_wait_aen = 0;
instance->flag_ieee = 0;
instance->ev = NULL;
+ instance->issuepend_done = 1;
+ instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+ megasas_poll_wait_aen = 0;
instance->evt_detail = pci_alloc_consistent(pdev,
sizeof(struct
@@ -3050,6 +3633,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
* Initialize locks and queues
*/
INIT_LIST_HEAD(&instance->cmd_pool);
+ INIT_LIST_HEAD(&instance->internal_reset_pending_q);
atomic_set(&instance->fw_outstanding,0);
@@ -3057,7 +3641,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
init_waitqueue_head(&instance->abort_cmd_wait_q);
spin_lock_init(&instance->cmd_pool_lock);
- spin_lock_init(&instance->fire_lock);
+ spin_lock_init(&instance->hba_lock);
spin_lock_init(&instance->completion_lock);
spin_lock_init(&poll_aen_lock);
@@ -3082,6 +3666,9 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
instance->flag = 0;
instance->unload = 1;
instance->last_time = 0;
+ instance->disableOnlineCtrlReset = 1;
+
+ INIT_WORK(&instance->work_init, process_fw_state_change_wq);
/*
* Initialize MFI Firmware
@@ -3173,6 +3760,9 @@ static void megasas_flush_cache(struct megasas_instance *instance)
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR)
+ return;
+
cmd = megasas_get_cmd(instance);
if (!cmd)
@@ -3209,6 +3799,9 @@ static void megasas_shutdown_controller(struct megasas_instance *instance,
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR)
+ return;
+
cmd = megasas_get_cmd(instance);
if (!cmd)
@@ -3716,6 +4309,9 @@ static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
struct megasas_iocpacket *ioc;
struct megasas_instance *instance;
int error;
+ int i;
+ unsigned long flags;
+ u32 wait_time = MEGASAS_RESET_WAIT_TIME;
ioc = kmalloc(sizeof(*ioc), GFP_KERNEL);
if (!ioc)
@@ -3732,8 +4328,8 @@ static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
goto out_kfree_ioc;
}
- if (instance->hw_crit_error == 1) {
- printk(KERN_DEBUG "Controller in Crit ERROR\n");
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
+ printk(KERN_ERR "Controller in crit error\n");
error = -ENODEV;
goto out_kfree_ioc;
}
@@ -3750,6 +4346,35 @@ static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
error = -ERESTARTSYS;
goto out_kfree_ioc;
}
+
+ for (i = 0; i < wait_time; i++) {
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery == MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ break;
+ }
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
+ printk(KERN_NOTICE "megasas: waiting"
+ "for controller reset to finish\n");
+ }
+
+ msleep(1000);
+ }
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ printk(KERN_ERR "megaraid_sas: timed out while"
+ "waiting for HBA to recover\n");
+ error = -ENODEV;
+ goto out_kfree_ioc;
+ }
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
error = megasas_mgmt_fw_ioctl(instance, user_ioc, ioc);
up(&instance->ioctl_sem);
@@ -3763,6 +4388,9 @@ static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg)
struct megasas_instance *instance;
struct megasas_aen aen;
int error;
+ int i;
+ unsigned long flags;
+ u32 wait_time = MEGASAS_RESET_WAIT_TIME;
if (file->private_data != file) {
printk(KERN_DEBUG "megasas: fasync_helper was not "
@@ -3778,14 +4406,42 @@ static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg)
if (!instance)
return -ENODEV;
- if (instance->hw_crit_error == 1) {
- error = -ENODEV;
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
+ return -ENODEV;
}
if (instance->unload == 1) {
return -ENODEV;
}
+ for (i = 0; i < wait_time; i++) {
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery == MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock,
+ flags);
+ break;
+ }
+
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
+ printk(KERN_NOTICE "megasas: waiting for"
+ "controller reset to finish\n");
+ }
+
+ msleep(1000);
+ }
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ printk(KERN_ERR "megaraid_sas: timed out while waiting"
+ "for HBA to recover.\n");
+ return -ENODEV;
+ }
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
mutex_lock(&instance->aen_mutex);
error = megasas_register_aen(instance, aen.seq_num,
aen.class_locale_word);
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index a22d8d48b7dd..a231aa811e56 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -60,6 +60,7 @@
#define MFI_STATE_READY 0xB0000000
#define MFI_STATE_OPERATIONAL 0xC0000000
#define MFI_STATE_FAULT 0xF0000000
+#define MFI_RESET_REQUIRED 0x00000001
#define MEGAMFI_FRAME_SIZE 64
@@ -73,6 +74,12 @@
* HOTPLUG : Resume from Hotplug
* MFI_STOP_ADP : Send signal to FW to stop processing
*/
+#define WRITE_SEQUENCE_OFFSET (0x0000000FC) /* I20 */
+#define HOST_DIAGNOSTIC_OFFSET (0x000000F8) /* I20 */
+#define DIAG_WRITE_ENABLE (0x00000080)
+#define DIAG_RESET_ADAPTER (0x00000004)
+
+#define MFI_ADP_RESET 0x00000040
#define MFI_INIT_ABORT 0x00000001
#define MFI_INIT_READY 0x00000002
#define MFI_INIT_MFIMODE 0x00000004
@@ -402,8 +409,40 @@ struct megasas_ctrl_prop {
u16 ecc_bucket_leak_rate;
u8 restore_hotspare_on_insertion;
u8 expose_encl_devices;
- u8 reserved[38];
+ u8 maintainPdFailHistory;
+ u8 disallowHostRequestReordering;
+ u8 abortCCOnError;
+ u8 loadBalanceMode;
+ u8 disableAutoDetectBackplane;
+ u8 snapVDSpace;
+
+ /*
+ * Add properties that can be controlled by
+ * a bit in the following structure.
+ */
+
+ struct {
+ u32 copyBackDisabled : 1;
+ u32 SMARTerEnabled : 1;
+ u32 prCorrectUnconfiguredAreas : 1;
+ u32 useFdeOnly : 1;
+ u32 disableNCQ : 1;
+ u32 SSDSMARTerEnabled : 1;
+ u32 SSDPatrolReadEnabled : 1;
+ u32 enableSpinDownUnconfigured : 1;
+ u32 autoEnhancedImport : 1;
+ u32 enableSecretKeyControl : 1;
+ u32 disableOnlineCtrlReset : 1;
+ u32 allowBootWithPinnedCache : 1;
+ u32 disableSpinDownHS : 1;
+ u32 enableJBOD : 1;
+ u32 reserved :18;
+ } OnOffProperties;
+ u8 autoSnapVDSpace;
+ u8 viewSpace;
+ u16 spinDownTime;
+ u8 reserved[24];
} __packed;
/*
@@ -704,6 +743,12 @@ struct megasas_ctrl_info {
*/
#define IS_DMA64 (sizeof(dma_addr_t) == 8)
+#define MFI_XSCALE_OMR0_CHANGE_INTERRUPT 0x00000001
+
+#define MFI_INTR_FLAG_REPLY_MESSAGE 0x00000001
+#define MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE 0x00000002
+#define MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT 0x00000004
+
#define MFI_OB_INTR_STATUS_MASK 0x00000002
#define MFI_POLL_TIMEOUT_SECS 60
#define MEGASAS_COMPLETION_TIMER_INTERVAL (HZ/10)
@@ -714,6 +759,9 @@ struct megasas_ctrl_info {
#define MFI_REPLY_SKINNY_MESSAGE_INTERRUPT 0x40000000
#define MFI_SKINNY_ENABLE_INTERRUPT_MASK (0x00000001)
+#define MFI_1068_PCSR_OFFSET 0x84
+#define MFI_1068_FW_HANDSHAKE_OFFSET 0x64
+#define MFI_1068_FW_READY 0xDDDD0000
/*
* register set for both 1068 and 1078 controllers
* structure extended for 1078 registers
@@ -755,8 +803,10 @@ struct megasas_register_set {
u32 inbound_high_queue_port ; /*00C4h*/
u32 reserved_5; /*00C8h*/
- u32 index_registers[820]; /*00CCh*/
-
+ u32 res_6[11]; /*CCh*/
+ u32 host_diag;
+ u32 seq_offset;
+ u32 index_registers[807]; /*00CCh*/
} __attribute__ ((packed));
struct megasas_sge32 {
@@ -1226,11 +1276,12 @@ struct megasas_instance {
struct megasas_cmd **cmd_list;
struct list_head cmd_pool;
+ /* used to sync fire the cmd to fw */
spinlock_t cmd_pool_lock;
+ /* used to sync fire the cmd to fw */
+ spinlock_t hba_lock;
/* used to synch producer, consumer ptrs in dpc */
spinlock_t completion_lock;
- /* used to sync fire the cmd to fw */
- spinlock_t fire_lock;
struct dma_pool *frame_dma_pool;
struct dma_pool *sense_dma_pool;
@@ -1247,19 +1298,36 @@ struct megasas_instance {
struct pci_dev *pdev;
u32 unique_id;
+ u32 fw_support_ieee;
atomic_t fw_outstanding;
- u32 hw_crit_error;
+ atomic_t fw_reset_no_pci_access;
struct megasas_instance_template *instancet;
struct tasklet_struct isr_tasklet;
+ struct work_struct work_init;
u8 flag;
u8 unload;
u8 flag_ieee;
+ u8 issuepend_done;
+ u8 disableOnlineCtrlReset;
+ u8 adprecovery;
unsigned long last_time;
+ u32 mfiStatus;
+ u32 last_seq_num;
struct timer_list io_completion_timer;
+ struct list_head internal_reset_pending_q;
+};
+
+enum {
+ MEGASAS_HBA_OPERATIONAL = 0,
+ MEGASAS_ADPRESET_SM_INFAULT = 1,
+ MEGASAS_ADPRESET_SM_FW_RESET_SUCCESS = 2,
+ MEGASAS_ADPRESET_SM_OPERATIONAL = 3,
+ MEGASAS_HW_CRITICAL_ERROR = 4,
+ MEGASAS_ADPRESET_INPROG_SIGN = 0xDEADDEAD,
};
struct megasas_instance_template {
@@ -1272,6 +1340,10 @@ struct megasas_instance_template {
int (*clear_intr)(struct megasas_register_set __iomem *);
u32 (*read_fw_status_reg)(struct megasas_register_set __iomem *);
+ int (*adp_reset)(struct megasas_instance *, \
+ struct megasas_register_set __iomem *);
+ int (*check_reset)(struct megasas_instance *, \
+ struct megasas_register_set __iomem *);
};
#define MEGASAS_IS_LOGICAL(scp) \
@@ -1291,7 +1363,9 @@ struct megasas_cmd {
u32 index;
u8 sync_cmd;
u8 cmd_status;
- u16 abort_aen;
+ u8 abort_aen;
+ u8 retry_for_fw_reset;
+
struct list_head list;
struct scsi_cmnd *scmd;
--
1.7.10.rc1
From: adam radford <aradford@gmail.com>
Date: Tue, 14 Dec 2010 19:17:17 -0800
Subject: [SCSI] megaraid_sas: Rename megaraid_sas.c to megaraid_sas_base.c
commit 0d49016bbab4fe9164710b1d4bbae116b89b7f7e upstream.
This patch renames megaraid_sas.c to megaraid_sas_base.c to facilitate
other files in the compile.
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/Makefile | 1 +
drivers/scsi/megaraid/megaraid_sas.c | 5005 -----------------------------
drivers/scsi/megaraid/megaraid_sas_base.c | 5005 +++++++++++++++++++++++++++++
3 files changed, 5006 insertions(+), 5005 deletions(-)
delete mode 100644 drivers/scsi/megaraid/megaraid_sas.c
create mode 100644 drivers/scsi/megaraid/megaraid_sas_base.c
diff --git a/drivers/scsi/megaraid/Makefile b/drivers/scsi/megaraid/Makefile
index f469915b97c3..6613a2ceea03 100644
--- a/drivers/scsi/megaraid/Makefile
+++ b/drivers/scsi/megaraid/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_MEGARAID_MM) += megaraid_mm.o
obj-$(CONFIG_MEGARAID_MAILBOX) += megaraid_mbox.o
obj-$(CONFIG_MEGARAID_SAS) += megaraid_sas.o
+megaraid_sas-objs := megaraid_sas_base.o
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
deleted file mode 100644
index 72c925d9e0f3..000000000000
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ /dev/null
@@ -1,5005 +0,0 @@
-/*
- *
- * Linux MegaRAID driver for SAS based RAID controllers
- *
- * Copyright (c) 2003-2005 LSI Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * FILE : megaraid_sas.c
- * Version : v00.00.04.01-rc1
- *
- * Authors:
- * (email-id : megaraidlinux@lsi.com)
- * Sreenivas Bagalkote
- * Sumant Patro
- * Bo Yang
- *
- * List of supported controllers
- *
- * OEM Product Name VID DID SSVID SSID
- * --- ------------ --- --- ---- ----
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/list.h>
-#include <linux/moduleparam.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/smp_lock.h>
-#include <linux/uio.h>
-#include <asm/uaccess.h>
-#include <linux/fs.h>
-#include <linux/compat.h>
-#include <linux/blkdev.h>
-#include <linux/mutex.h>
-#include <linux/poll.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include "megaraid_sas.h"
-
-/*
- * poll_mode_io:1- schedule complete completion from q cmd
- */
-static unsigned int poll_mode_io;
-module_param_named(poll_mode_io, poll_mode_io, int, 0);
-MODULE_PARM_DESC(poll_mode_io,
- "Complete cmds from IO path, (default=0)");
-
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MEGASAS_VERSION);
-MODULE_AUTHOR("megaraidlinux@lsi.com");
-MODULE_DESCRIPTION("LSI MegaRAID SAS Driver");
-
-static int megasas_transition_to_ready(struct megasas_instance *instance);
-static int megasas_get_pd_list(struct megasas_instance *instance);
-static int megasas_issue_init_mfi(struct megasas_instance *instance);
-static int megasas_register_aen(struct megasas_instance *instance,
- u32 seq_num, u32 class_locale_word);
-/*
- * PCI ID table for all supported controllers
- */
-static struct pci_device_id megasas_pci_table[] = {
-
- {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064R)},
- /* xscale IOP */
- {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078R)},
- /* ppc IOP */
- {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
- /* ppc IOP */
- {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
- /* gen2*/
- {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
- /* gen2*/
- {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0073SKINNY)},
- /* skinny*/
- {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0071SKINNY)},
- /* skinny*/
- {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
- /* xscale IOP, vega */
- {PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
- /* xscale IOP */
- {}
-};
-
-MODULE_DEVICE_TABLE(pci, megasas_pci_table);
-
-static int megasas_mgmt_majorno;
-static struct megasas_mgmt_info megasas_mgmt_info;
-static struct fasync_struct *megasas_async_queue;
-static DEFINE_MUTEX(megasas_async_queue_mutex);
-
-static int megasas_poll_wait_aen;
-static DECLARE_WAIT_QUEUE_HEAD(megasas_poll_wait);
-static u32 support_poll_for_event;
-static u32 megasas_dbg_lvl;
-
-/* define lock for aen poll */
-spinlock_t poll_aen_lock;
-
-static void
-megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
- u8 alt_status);
-
-/**
- * megasas_get_cmd - Get a command from the free pool
- * @instance: Adapter soft state
- *
- * Returns a free command from the pool
- */
-static struct megasas_cmd *megasas_get_cmd(struct megasas_instance
- *instance)
-{
- unsigned long flags;
- struct megasas_cmd *cmd = NULL;
-
- spin_lock_irqsave(&instance->cmd_pool_lock, flags);
-
- if (!list_empty(&instance->cmd_pool)) {
- cmd = list_entry((&instance->cmd_pool)->next,
- struct megasas_cmd, list);
- list_del_init(&cmd->list);
- } else {
- printk(KERN_ERR "megasas: Command pool empty!\n");
- }
-
- spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
- return cmd;
-}
-
-/**
- * megasas_return_cmd - Return a cmd to free command pool
- * @instance: Adapter soft state
- * @cmd: Command packet to be returned to free command pool
- */
-static inline void
-megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&instance->cmd_pool_lock, flags);
-
- cmd->scmd = NULL;
- list_add_tail(&cmd->list, &instance->cmd_pool);
-
- spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
-}
-
-
-/**
-* The following functions are defined for xscale
-* (deviceid : 1064R, PERC5) controllers
-*/
-
-/**
- * megasas_enable_intr_xscale - Enables interrupts
- * @regs: MFI register set
- */
-static inline void
-megasas_enable_intr_xscale(struct megasas_register_set __iomem * regs)
-{
- writel(0, &(regs)->outbound_intr_mask);
-
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_mask);
-}
-
-/**
- * megasas_disable_intr_xscale -Disables interrupt
- * @regs: MFI register set
- */
-static inline void
-megasas_disable_intr_xscale(struct megasas_register_set __iomem * regs)
-{
- u32 mask = 0x1f;
- writel(mask, ®s->outbound_intr_mask);
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_mask);
-}
-
-/**
- * megasas_read_fw_status_reg_xscale - returns the current FW status value
- * @regs: MFI register set
- */
-static u32
-megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs)
-{
- return readl(&(regs)->outbound_msg_0);
-}
-/**
- * megasas_clear_interrupt_xscale - Check & clear interrupt
- * @regs: MFI register set
- */
-static int
-megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
-{
- u32 status;
- u32 mfiStatus = 0;
- /*
- * Check if it is our interrupt
- */
- status = readl(®s->outbound_intr_status);
-
- if (status & MFI_OB_INTR_STATUS_MASK)
- mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
- if (status & MFI_XSCALE_OMR0_CHANGE_INTERRUPT)
- mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
-
- /*
- * Clear the interrupt by writing back the same value
- */
- if (mfiStatus)
- writel(status, ®s->outbound_intr_status);
-
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_status);
-
- return mfiStatus;
-}
-
-/**
- * megasas_fire_cmd_xscale - Sends command to the FW
- * @frame_phys_addr : Physical address of cmd
- * @frame_count : Number of frames for the command
- * @regs : MFI register set
- */
-static inline void
-megasas_fire_cmd_xscale(struct megasas_instance *instance,
- dma_addr_t frame_phys_addr,
- u32 frame_count,
- struct megasas_register_set __iomem *regs)
-{
- unsigned long flags;
- spin_lock_irqsave(&instance->hba_lock, flags);
- writel((frame_phys_addr >> 3)|(frame_count),
- &(regs)->inbound_queue_port);
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-}
-
-/**
- * megasas_adp_reset_xscale - For controller reset
- * @regs: MFI register set
- */
-static int
-megasas_adp_reset_xscale(struct megasas_instance *instance,
- struct megasas_register_set __iomem *regs)
-{
- u32 i;
- u32 pcidata;
- writel(MFI_ADP_RESET, ®s->inbound_doorbell);
-
- for (i = 0; i < 3; i++)
- msleep(1000); /* sleep for 3 secs */
- pcidata = 0;
- pci_read_config_dword(instance->pdev, MFI_1068_PCSR_OFFSET, &pcidata);
- printk(KERN_NOTICE "pcidata = %x\n", pcidata);
- if (pcidata & 0x2) {
- printk(KERN_NOTICE "mfi 1068 offset read=%x\n", pcidata);
- pcidata &= ~0x2;
- pci_write_config_dword(instance->pdev,
- MFI_1068_PCSR_OFFSET, pcidata);
-
- for (i = 0; i < 2; i++)
- msleep(1000); /* need to wait 2 secs again */
-
- pcidata = 0;
- pci_read_config_dword(instance->pdev,
- MFI_1068_FW_HANDSHAKE_OFFSET, &pcidata);
- printk(KERN_NOTICE "1068 offset handshake read=%x\n", pcidata);
- if ((pcidata & 0xffff0000) == MFI_1068_FW_READY) {
- printk(KERN_NOTICE "1068 offset pcidt=%x\n", pcidata);
- pcidata = 0;
- pci_write_config_dword(instance->pdev,
- MFI_1068_FW_HANDSHAKE_OFFSET, pcidata);
- }
- }
- return 0;
-}
-
-/**
- * megasas_check_reset_xscale - For controller reset check
- * @regs: MFI register set
- */
-static int
-megasas_check_reset_xscale(struct megasas_instance *instance,
- struct megasas_register_set __iomem *regs)
-{
- u32 consumer;
- consumer = *instance->consumer;
-
- if ((instance->adprecovery != MEGASAS_HBA_OPERATIONAL) &&
- (*instance->consumer == MEGASAS_ADPRESET_INPROG_SIGN)) {
- return 1;
- }
- return 0;
-}
-
-static struct megasas_instance_template megasas_instance_template_xscale = {
-
- .fire_cmd = megasas_fire_cmd_xscale,
- .enable_intr = megasas_enable_intr_xscale,
- .disable_intr = megasas_disable_intr_xscale,
- .clear_intr = megasas_clear_intr_xscale,
- .read_fw_status_reg = megasas_read_fw_status_reg_xscale,
- .adp_reset = megasas_adp_reset_xscale,
- .check_reset = megasas_check_reset_xscale,
-};
-
-/**
-* This is the end of set of functions & definitions specific
-* to xscale (deviceid : 1064R, PERC5) controllers
-*/
-
-/**
-* The following functions are defined for ppc (deviceid : 0x60)
-* controllers
-*/
-
-/**
- * megasas_enable_intr_ppc - Enables interrupts
- * @regs: MFI register set
- */
-static inline void
-megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs)
-{
- writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
-
- writel(~0x80000000, &(regs)->outbound_intr_mask);
-
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_mask);
-}
-
-/**
- * megasas_disable_intr_ppc - Disable interrupt
- * @regs: MFI register set
- */
-static inline void
-megasas_disable_intr_ppc(struct megasas_register_set __iomem * regs)
-{
- u32 mask = 0xFFFFFFFF;
- writel(mask, ®s->outbound_intr_mask);
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_mask);
-}
-
-/**
- * megasas_read_fw_status_reg_ppc - returns the current FW status value
- * @regs: MFI register set
- */
-static u32
-megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs)
-{
- return readl(&(regs)->outbound_scratch_pad);
-}
-
-/**
- * megasas_clear_interrupt_ppc - Check & clear interrupt
- * @regs: MFI register set
- */
-static int
-megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
-{
- u32 status;
- /*
- * Check if it is our interrupt
- */
- status = readl(®s->outbound_intr_status);
-
- if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) {
- return 0;
- }
-
- /*
- * Clear the interrupt by writing back the same value
- */
- writel(status, ®s->outbound_doorbell_clear);
-
- /* Dummy readl to force pci flush */
- readl(®s->outbound_doorbell_clear);
-
- return 1;
-}
-/**
- * megasas_fire_cmd_ppc - Sends command to the FW
- * @frame_phys_addr : Physical address of cmd
- * @frame_count : Number of frames for the command
- * @regs : MFI register set
- */
-static inline void
-megasas_fire_cmd_ppc(struct megasas_instance *instance,
- dma_addr_t frame_phys_addr,
- u32 frame_count,
- struct megasas_register_set __iomem *regs)
-{
- unsigned long flags;
- spin_lock_irqsave(&instance->hba_lock, flags);
- writel((frame_phys_addr | (frame_count<<1))|1,
- &(regs)->inbound_queue_port);
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-}
-
-/**
- * megasas_adp_reset_ppc - For controller reset
- * @regs: MFI register set
- */
-static int
-megasas_adp_reset_ppc(struct megasas_instance *instance,
- struct megasas_register_set __iomem *regs)
-{
- return 0;
-}
-
-/**
- * megasas_check_reset_ppc - For controller reset check
- * @regs: MFI register set
- */
-static int
-megasas_check_reset_ppc(struct megasas_instance *instance,
- struct megasas_register_set __iomem *regs)
-{
- return 0;
-}
-static struct megasas_instance_template megasas_instance_template_ppc = {
-
- .fire_cmd = megasas_fire_cmd_ppc,
- .enable_intr = megasas_enable_intr_ppc,
- .disable_intr = megasas_disable_intr_ppc,
- .clear_intr = megasas_clear_intr_ppc,
- .read_fw_status_reg = megasas_read_fw_status_reg_ppc,
- .adp_reset = megasas_adp_reset_ppc,
- .check_reset = megasas_check_reset_ppc,
-};
-
-/**
- * megasas_enable_intr_skinny - Enables interrupts
- * @regs: MFI register set
- */
-static inline void
-megasas_enable_intr_skinny(struct megasas_register_set __iomem *regs)
-{
- writel(0xFFFFFFFF, &(regs)->outbound_intr_mask);
-
- writel(~MFI_SKINNY_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
-
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_mask);
-}
-
-/**
- * megasas_disable_intr_skinny - Disables interrupt
- * @regs: MFI register set
- */
-static inline void
-megasas_disable_intr_skinny(struct megasas_register_set __iomem *regs)
-{
- u32 mask = 0xFFFFFFFF;
- writel(mask, ®s->outbound_intr_mask);
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_mask);
-}
-
-/**
- * megasas_read_fw_status_reg_skinny - returns the current FW status value
- * @regs: MFI register set
- */
-static u32
-megasas_read_fw_status_reg_skinny(struct megasas_register_set __iomem *regs)
-{
- return readl(&(regs)->outbound_scratch_pad);
-}
-
-/**
- * megasas_clear_interrupt_skinny - Check & clear interrupt
- * @regs: MFI register set
- */
-static int
-megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
-{
- u32 status;
- /*
- * Check if it is our interrupt
- */
- status = readl(®s->outbound_intr_status);
-
- if (!(status & MFI_SKINNY_ENABLE_INTERRUPT_MASK)) {
- return 0;
- }
-
- /*
- * Clear the interrupt by writing back the same value
- */
- writel(status, ®s->outbound_intr_status);
-
- /*
- * dummy read to flush PCI
- */
- readl(®s->outbound_intr_status);
-
- return 1;
-}
-
-/**
- * megasas_fire_cmd_skinny - Sends command to the FW
- * @frame_phys_addr : Physical address of cmd
- * @frame_count : Number of frames for the command
- * @regs : MFI register set
- */
-static inline void
-megasas_fire_cmd_skinny(struct megasas_instance *instance,
- dma_addr_t frame_phys_addr,
- u32 frame_count,
- struct megasas_register_set __iomem *regs)
-{
- unsigned long flags;
- spin_lock_irqsave(&instance->hba_lock, flags);
- writel(0, &(regs)->inbound_high_queue_port);
- writel((frame_phys_addr | (frame_count<<1))|1,
- &(regs)->inbound_low_queue_port);
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-}
-
-/**
- * megasas_adp_reset_skinny - For controller reset
- * @regs: MFI register set
- */
-static int
-megasas_adp_reset_skinny(struct megasas_instance *instance,
- struct megasas_register_set __iomem *regs)
-{
- return 0;
-}
-
-/**
- * megasas_check_reset_skinny - For controller reset check
- * @regs: MFI register set
- */
-static int
-megasas_check_reset_skinny(struct megasas_instance *instance,
- struct megasas_register_set __iomem *regs)
-{
- return 0;
-}
-
-static struct megasas_instance_template megasas_instance_template_skinny = {
-
- .fire_cmd = megasas_fire_cmd_skinny,
- .enable_intr = megasas_enable_intr_skinny,
- .disable_intr = megasas_disable_intr_skinny,
- .clear_intr = megasas_clear_intr_skinny,
- .read_fw_status_reg = megasas_read_fw_status_reg_skinny,
- .adp_reset = megasas_adp_reset_skinny,
- .check_reset = megasas_check_reset_skinny,
-};
-
-
-/**
-* The following functions are defined for gen2 (deviceid : 0x78 0x79)
-* controllers
-*/
-
-/**
- * megasas_enable_intr_gen2 - Enables interrupts
- * @regs: MFI register set
- */
-static inline void
-megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs)
-{
- writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
-
- /* write ~0x00000005 (4 & 1) to the intr mask*/
- writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
-
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_mask);
-}
-
-/**
- * megasas_disable_intr_gen2 - Disables interrupt
- * @regs: MFI register set
- */
-static inline void
-megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs)
-{
- u32 mask = 0xFFFFFFFF;
- writel(mask, ®s->outbound_intr_mask);
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_mask);
-}
-
-/**
- * megasas_read_fw_status_reg_gen2 - returns the current FW status value
- * @regs: MFI register set
- */
-static u32
-megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
-{
- return readl(&(regs)->outbound_scratch_pad);
-}
-
-/**
- * megasas_clear_interrupt_gen2 - Check & clear interrupt
- * @regs: MFI register set
- */
-static int
-megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
-{
- u32 status;
- u32 mfiStatus = 0;
- /*
- * Check if it is our interrupt
- */
- status = readl(®s->outbound_intr_status);
-
- if (status & MFI_GEN2_ENABLE_INTERRUPT_MASK) {
- mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
- }
- if (status & MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT) {
- mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
- }
-
- /*
- * Clear the interrupt by writing back the same value
- */
- if (mfiStatus)
- writel(status, ®s->outbound_doorbell_clear);
-
- /* Dummy readl to force pci flush */
- readl(®s->outbound_intr_status);
-
- return mfiStatus;
-}
-/**
- * megasas_fire_cmd_gen2 - Sends command to the FW
- * @frame_phys_addr : Physical address of cmd
- * @frame_count : Number of frames for the command
- * @regs : MFI register set
- */
-static inline void
-megasas_fire_cmd_gen2(struct megasas_instance *instance,
- dma_addr_t frame_phys_addr,
- u32 frame_count,
- struct megasas_register_set __iomem *regs)
-{
- unsigned long flags;
- spin_lock_irqsave(&instance->hba_lock, flags);
- writel((frame_phys_addr | (frame_count<<1))|1,
- &(regs)->inbound_queue_port);
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-}
-
-/**
- * megasas_adp_reset_gen2 - For controller reset
- * @regs: MFI register set
- */
-static int
-megasas_adp_reset_gen2(struct megasas_instance *instance,
- struct megasas_register_set __iomem *reg_set)
-{
- u32 retry = 0 ;
- u32 HostDiag;
-
- writel(0, ®_set->seq_offset);
- writel(4, ®_set->seq_offset);
- writel(0xb, ®_set->seq_offset);
- writel(2, ®_set->seq_offset);
- writel(7, ®_set->seq_offset);
- writel(0xd, ®_set->seq_offset);
- msleep(1000);
-
- HostDiag = (u32)readl(®_set->host_diag);
-
- while ( !( HostDiag & DIAG_WRITE_ENABLE) ) {
- msleep(100);
- HostDiag = (u32)readl(®_set->host_diag);
- printk(KERN_NOTICE "RESETGEN2: retry=%x, hostdiag=%x\n",
- retry, HostDiag);
-
- if (retry++ >= 100)
- return 1;
-
- }
-
- printk(KERN_NOTICE "ADP_RESET_GEN2: HostDiag=%x\n", HostDiag);
-
- writel((HostDiag | DIAG_RESET_ADAPTER), ®_set->host_diag);
-
- ssleep(10);
-
- HostDiag = (u32)readl(®_set->host_diag);
- while ( ( HostDiag & DIAG_RESET_ADAPTER) ) {
- msleep(100);
- HostDiag = (u32)readl(®_set->host_diag);
- printk(KERN_NOTICE "RESET_GEN2: retry=%x, hostdiag=%x\n",
- retry, HostDiag);
-
- if (retry++ >= 1000)
- return 1;
-
- }
- return 0;
-}
-
-/**
- * megasas_check_reset_gen2 - For controller reset check
- * @regs: MFI register set
- */
-static int
-megasas_check_reset_gen2(struct megasas_instance *instance,
- struct megasas_register_set __iomem *regs)
-{
- return 0;
-}
-
-static struct megasas_instance_template megasas_instance_template_gen2 = {
-
- .fire_cmd = megasas_fire_cmd_gen2,
- .enable_intr = megasas_enable_intr_gen2,
- .disable_intr = megasas_disable_intr_gen2,
- .clear_intr = megasas_clear_intr_gen2,
- .read_fw_status_reg = megasas_read_fw_status_reg_gen2,
- .adp_reset = megasas_adp_reset_gen2,
- .check_reset = megasas_check_reset_gen2,
-};
-
-/**
-* This is the end of set of functions & definitions
-* specific to gen2 (deviceid : 0x78, 0x79) controllers
-*/
-
-/**
- * megasas_issue_polled - Issues a polling command
- * @instance: Adapter soft state
- * @cmd: Command packet to be issued
- *
- * For polling, MFI requires the cmd_status to be set to 0xFF before posting.
- */
-static int
-megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd)
-{
- int i;
- u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000;
-
- struct megasas_header *frame_hdr = &cmd->frame->hdr;
-
- frame_hdr->cmd_status = 0xFF;
- frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
-
- /*
- * Issue the frame using inbound queue port
- */
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr, 0, instance->reg_set);
-
- /*
- * Wait for cmd_status to change
- */
- for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i++) {
- rmb();
- msleep(1);
- }
-
- if (frame_hdr->cmd_status == 0xff)
- return -ETIME;
-
- return 0;
-}
-
-/**
- * megasas_issue_blocked_cmd - Synchronous wrapper around regular FW cmds
- * @instance: Adapter soft state
- * @cmd: Command to be issued
- *
- * This function waits on an event for the command to be returned from ISR.
- * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
- * Used to issue ioctl commands.
- */
-static int
-megasas_issue_blocked_cmd(struct megasas_instance *instance,
- struct megasas_cmd *cmd)
-{
- cmd->cmd_status = ENODATA;
-
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr, 0, instance->reg_set);
-
- wait_event(instance->int_cmd_wait_q, cmd->cmd_status != ENODATA);
-
- return 0;
-}
-
-/**
- * megasas_issue_blocked_abort_cmd - Aborts previously issued cmd
- * @instance: Adapter soft state
- * @cmd_to_abort: Previously issued cmd to be aborted
- *
- * MFI firmware can abort previously issued AEN comamnd (automatic event
- * notification). The megasas_issue_blocked_abort_cmd() issues such abort
- * cmd and waits for return status.
- * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
- */
-static int
-megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
- struct megasas_cmd *cmd_to_abort)
-{
- struct megasas_cmd *cmd;
- struct megasas_abort_frame *abort_fr;
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd)
- return -1;
-
- abort_fr = &cmd->frame->abort;
-
- /*
- * Prepare and issue the abort frame
- */
- abort_fr->cmd = MFI_CMD_ABORT;
- abort_fr->cmd_status = 0xFF;
- abort_fr->flags = 0;
- abort_fr->abort_context = cmd_to_abort->index;
- abort_fr->abort_mfi_phys_addr_lo = cmd_to_abort->frame_phys_addr;
- abort_fr->abort_mfi_phys_addr_hi = 0;
-
- cmd->sync_cmd = 1;
- cmd->cmd_status = 0xFF;
-
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr, 0, instance->reg_set);
-
- /*
- * Wait for this cmd to complete
- */
- wait_event(instance->abort_cmd_wait_q, cmd->cmd_status != 0xFF);
- cmd->sync_cmd = 0;
-
- megasas_return_cmd(instance, cmd);
- return 0;
-}
-
-/**
- * megasas_make_sgl32 - Prepares 32-bit SGL
- * @instance: Adapter soft state
- * @scp: SCSI command from the mid-layer
- * @mfi_sgl: SGL to be filled in
- *
- * If successful, this function returns the number of SG elements. Otherwise,
- * it returnes -1.
- */
-static int
-megasas_make_sgl32(struct megasas_instance *instance, struct scsi_cmnd *scp,
- union megasas_sgl *mfi_sgl)
-{
- int i;
- int sge_count;
- struct scatterlist *os_sgl;
-
- sge_count = scsi_dma_map(scp);
- BUG_ON(sge_count < 0);
-
- if (sge_count) {
- scsi_for_each_sg(scp, os_sgl, sge_count, i) {
- mfi_sgl->sge32[i].length = sg_dma_len(os_sgl);
- mfi_sgl->sge32[i].phys_addr = sg_dma_address(os_sgl);
- }
- }
- return sge_count;
-}
-
-/**
- * megasas_make_sgl64 - Prepares 64-bit SGL
- * @instance: Adapter soft state
- * @scp: SCSI command from the mid-layer
- * @mfi_sgl: SGL to be filled in
- *
- * If successful, this function returns the number of SG elements. Otherwise,
- * it returnes -1.
- */
-static int
-megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd *scp,
- union megasas_sgl *mfi_sgl)
-{
- int i;
- int sge_count;
- struct scatterlist *os_sgl;
-
- sge_count = scsi_dma_map(scp);
- BUG_ON(sge_count < 0);
-
- if (sge_count) {
- scsi_for_each_sg(scp, os_sgl, sge_count, i) {
- mfi_sgl->sge64[i].length = sg_dma_len(os_sgl);
- mfi_sgl->sge64[i].phys_addr = sg_dma_address(os_sgl);
- }
- }
- return sge_count;
-}
-
-/**
- * megasas_make_sgl_skinny - Prepares IEEE SGL
- * @instance: Adapter soft state
- * @scp: SCSI command from the mid-layer
- * @mfi_sgl: SGL to be filled in
- *
- * If successful, this function returns the number of SG elements. Otherwise,
- * it returnes -1.
- */
-static int
-megasas_make_sgl_skinny(struct megasas_instance *instance,
- struct scsi_cmnd *scp, union megasas_sgl *mfi_sgl)
-{
- int i;
- int sge_count;
- struct scatterlist *os_sgl;
-
- sge_count = scsi_dma_map(scp);
-
- if (sge_count) {
- scsi_for_each_sg(scp, os_sgl, sge_count, i) {
- mfi_sgl->sge_skinny[i].length = sg_dma_len(os_sgl);
- mfi_sgl->sge_skinny[i].phys_addr =
- sg_dma_address(os_sgl);
- }
- }
- return sge_count;
-}
-
- /**
- * megasas_get_frame_count - Computes the number of frames
- * @frame_type : type of frame- io or pthru frame
- * @sge_count : number of sg elements
- *
- * Returns the number of frames required for numnber of sge's (sge_count)
- */
-
-static u32 megasas_get_frame_count(struct megasas_instance *instance,
- u8 sge_count, u8 frame_type)
-{
- int num_cnt;
- int sge_bytes;
- u32 sge_sz;
- u32 frame_count=0;
-
- sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
- sizeof(struct megasas_sge32);
-
- if (instance->flag_ieee) {
- sge_sz = sizeof(struct megasas_sge_skinny);
- }
-
- /*
- * Main frame can contain 2 SGEs for 64-bit SGLs and
- * 3 SGEs for 32-bit SGLs for ldio &
- * 1 SGEs for 64-bit SGLs and
- * 2 SGEs for 32-bit SGLs for pthru frame
- */
- if (unlikely(frame_type == PTHRU_FRAME)) {
- if (instance->flag_ieee == 1) {
- num_cnt = sge_count - 1;
- } else if (IS_DMA64)
- num_cnt = sge_count - 1;
- else
- num_cnt = sge_count - 2;
- } else {
- if (instance->flag_ieee == 1) {
- num_cnt = sge_count - 1;
- } else if (IS_DMA64)
- num_cnt = sge_count - 2;
- else
- num_cnt = sge_count - 3;
- }
-
- if(num_cnt>0){
- sge_bytes = sge_sz * num_cnt;
-
- frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
- ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) ;
- }
- /* Main frame */
- frame_count +=1;
-
- if (frame_count > 7)
- frame_count = 8;
- return frame_count;
-}
-
-/**
- * megasas_build_dcdb - Prepares a direct cdb (DCDB) command
- * @instance: Adapter soft state
- * @scp: SCSI command
- * @cmd: Command to be prepared in
- *
- * This function prepares CDB commands. These are typcially pass-through
- * commands to the devices.
- */
-static int
-megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
- struct megasas_cmd *cmd)
-{
- u32 is_logical;
- u32 device_id;
- u16 flags = 0;
- struct megasas_pthru_frame *pthru;
-
- is_logical = MEGASAS_IS_LOGICAL(scp);
- device_id = MEGASAS_DEV_INDEX(instance, scp);
- pthru = (struct megasas_pthru_frame *)cmd->frame;
-
- if (scp->sc_data_direction == PCI_DMA_TODEVICE)
- flags = MFI_FRAME_DIR_WRITE;
- else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
- flags = MFI_FRAME_DIR_READ;
- else if (scp->sc_data_direction == PCI_DMA_NONE)
- flags = MFI_FRAME_DIR_NONE;
-
- if (instance->flag_ieee == 1) {
- flags |= MFI_FRAME_IEEE;
- }
-
- /*
- * Prepare the DCDB frame
- */
- pthru->cmd = (is_logical) ? MFI_CMD_LD_SCSI_IO : MFI_CMD_PD_SCSI_IO;
- pthru->cmd_status = 0x0;
- pthru->scsi_status = 0x0;
- pthru->target_id = device_id;
- pthru->lun = scp->device->lun;
- pthru->cdb_len = scp->cmd_len;
- pthru->timeout = 0;
- pthru->flags = flags;
- pthru->data_xfer_len = scsi_bufflen(scp);
-
- memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
-
- /*
- * Construct SGL
- */
- if (instance->flag_ieee == 1) {
- pthru->flags |= MFI_FRAME_SGL64;
- pthru->sge_count = megasas_make_sgl_skinny(instance, scp,
- &pthru->sgl);
- } else if (IS_DMA64) {
- pthru->flags |= MFI_FRAME_SGL64;
- pthru->sge_count = megasas_make_sgl64(instance, scp,
- &pthru->sgl);
- } else
- pthru->sge_count = megasas_make_sgl32(instance, scp,
- &pthru->sgl);
-
- if (pthru->sge_count > instance->max_num_sge) {
- printk(KERN_ERR "megasas: DCDB two many SGE NUM=%x\n",
- pthru->sge_count);
- return 0;
- }
-
- /*
- * Sense info specific
- */
- pthru->sense_len = SCSI_SENSE_BUFFERSIZE;
- pthru->sense_buf_phys_addr_hi = 0;
- pthru->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
-
- /*
- * Compute the total number of frames this command consumes. FW uses
- * this number to pull sufficient number of frames from host memory.
- */
- cmd->frame_count = megasas_get_frame_count(instance, pthru->sge_count,
- PTHRU_FRAME);
-
- return cmd->frame_count;
-}
-
-/**
- * megasas_build_ldio - Prepares IOs to logical devices
- * @instance: Adapter soft state
- * @scp: SCSI command
- * @cmd: Command to be prepared
- *
- * Frames (and accompanying SGLs) for regular SCSI IOs use this function.
- */
-static int
-megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
- struct megasas_cmd *cmd)
-{
- u32 device_id;
- u8 sc = scp->cmnd[0];
- u16 flags = 0;
- struct megasas_io_frame *ldio;
-
- device_id = MEGASAS_DEV_INDEX(instance, scp);
- ldio = (struct megasas_io_frame *)cmd->frame;
-
- if (scp->sc_data_direction == PCI_DMA_TODEVICE)
- flags = MFI_FRAME_DIR_WRITE;
- else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
- flags = MFI_FRAME_DIR_READ;
-
- if (instance->flag_ieee == 1) {
- flags |= MFI_FRAME_IEEE;
- }
-
- /*
- * Prepare the Logical IO frame: 2nd bit is zero for all read cmds
- */
- ldio->cmd = (sc & 0x02) ? MFI_CMD_LD_WRITE : MFI_CMD_LD_READ;
- ldio->cmd_status = 0x0;
- ldio->scsi_status = 0x0;
- ldio->target_id = device_id;
- ldio->timeout = 0;
- ldio->reserved_0 = 0;
- ldio->pad_0 = 0;
- ldio->flags = flags;
- ldio->start_lba_hi = 0;
- ldio->access_byte = (scp->cmd_len != 6) ? scp->cmnd[1] : 0;
-
- /*
- * 6-byte READ(0x08) or WRITE(0x0A) cdb
- */
- if (scp->cmd_len == 6) {
- ldio->lba_count = (u32) scp->cmnd[4];
- ldio->start_lba_lo = ((u32) scp->cmnd[1] << 16) |
- ((u32) scp->cmnd[2] << 8) | (u32) scp->cmnd[3];
-
- ldio->start_lba_lo &= 0x1FFFFF;
- }
-
- /*
- * 10-byte READ(0x28) or WRITE(0x2A) cdb
- */
- else if (scp->cmd_len == 10) {
- ldio->lba_count = (u32) scp->cmnd[8] |
- ((u32) scp->cmnd[7] << 8);
- ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) |
- ((u32) scp->cmnd[3] << 16) |
- ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
- }
-
- /*
- * 12-byte READ(0xA8) or WRITE(0xAA) cdb
- */
- else if (scp->cmd_len == 12) {
- ldio->lba_count = ((u32) scp->cmnd[6] << 24) |
- ((u32) scp->cmnd[7] << 16) |
- ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
-
- ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) |
- ((u32) scp->cmnd[3] << 16) |
- ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
- }
-
- /*
- * 16-byte READ(0x88) or WRITE(0x8A) cdb
- */
- else if (scp->cmd_len == 16) {
- ldio->lba_count = ((u32) scp->cmnd[10] << 24) |
- ((u32) scp->cmnd[11] << 16) |
- ((u32) scp->cmnd[12] << 8) | (u32) scp->cmnd[13];
-
- ldio->start_lba_lo = ((u32) scp->cmnd[6] << 24) |
- ((u32) scp->cmnd[7] << 16) |
- ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
-
- ldio->start_lba_hi = ((u32) scp->cmnd[2] << 24) |
- ((u32) scp->cmnd[3] << 16) |
- ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
-
- }
-
- /*
- * Construct SGL
- */
- if (instance->flag_ieee) {
- ldio->flags |= MFI_FRAME_SGL64;
- ldio->sge_count = megasas_make_sgl_skinny(instance, scp,
- &ldio->sgl);
- } else if (IS_DMA64) {
- ldio->flags |= MFI_FRAME_SGL64;
- ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
- } else
- ldio->sge_count = megasas_make_sgl32(instance, scp, &ldio->sgl);
-
- if (ldio->sge_count > instance->max_num_sge) {
- printk(KERN_ERR "megasas: build_ld_io: sge_count = %x\n",
- ldio->sge_count);
- return 0;
- }
-
- /*
- * Sense info specific
- */
- ldio->sense_len = SCSI_SENSE_BUFFERSIZE;
- ldio->sense_buf_phys_addr_hi = 0;
- ldio->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
-
- /*
- * Compute the total number of frames this command consumes. FW uses
- * this number to pull sufficient number of frames from host memory.
- */
- cmd->frame_count = megasas_get_frame_count(instance,
- ldio->sge_count, IO_FRAME);
-
- return cmd->frame_count;
-}
-
-/**
- * megasas_is_ldio - Checks if the cmd is for logical drive
- * @scmd: SCSI command
- *
- * Called by megasas_queue_command to find out if the command to be queued
- * is a logical drive command
- */
-static inline int megasas_is_ldio(struct scsi_cmnd *cmd)
-{
- if (!MEGASAS_IS_LOGICAL(cmd))
- return 0;
- switch (cmd->cmnd[0]) {
- case READ_10:
- case WRITE_10:
- case READ_12:
- case WRITE_12:
- case READ_6:
- case WRITE_6:
- case READ_16:
- case WRITE_16:
- return 1;
- default:
- return 0;
- }
-}
-
- /**
- * megasas_dump_pending_frames - Dumps the frame address of all pending cmds
- * in FW
- * @instance: Adapter soft state
- */
-static inline void
-megasas_dump_pending_frames(struct megasas_instance *instance)
-{
- struct megasas_cmd *cmd;
- int i,n;
- union megasas_sgl *mfi_sgl;
- struct megasas_io_frame *ldio;
- struct megasas_pthru_frame *pthru;
- u32 sgcount;
- u32 max_cmd = instance->max_fw_cmds;
-
- printk(KERN_ERR "\nmegasas[%d]: Dumping Frame Phys Address of all pending cmds in FW\n",instance->host->host_no);
- printk(KERN_ERR "megasas[%d]: Total OS Pending cmds : %d\n",instance->host->host_no,atomic_read(&instance->fw_outstanding));
- if (IS_DMA64)
- printk(KERN_ERR "\nmegasas[%d]: 64 bit SGLs were sent to FW\n",instance->host->host_no);
- else
- printk(KERN_ERR "\nmegasas[%d]: 32 bit SGLs were sent to FW\n",instance->host->host_no);
-
- printk(KERN_ERR "megasas[%d]: Pending OS cmds in FW : \n",instance->host->host_no);
- for (i = 0; i < max_cmd; i++) {
- cmd = instance->cmd_list[i];
- if(!cmd->scmd)
- continue;
- printk(KERN_ERR "megasas[%d]: Frame addr :0x%08lx : ",instance->host->host_no,(unsigned long)cmd->frame_phys_addr);
- if (megasas_is_ldio(cmd->scmd)){
- ldio = (struct megasas_io_frame *)cmd->frame;
- mfi_sgl = &ldio->sgl;
- sgcount = ldio->sge_count;
- printk(KERN_ERR "megasas[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, lba lo : 0x%x, lba_hi : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",instance->host->host_no, cmd->frame_count,ldio->cmd,ldio->target_id, ldio->start_lba_lo,ldio->start_lba_hi,ldio->sense_buf_phys_addr_lo,sgcount);
- }
- else {
- pthru = (struct megasas_pthru_frame *) cmd->frame;
- mfi_sgl = &pthru->sgl;
- sgcount = pthru->sge_count;
- printk(KERN_ERR "megasas[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, lun : 0x%x, cdb_len : 0x%x, data xfer len : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",instance->host->host_no,cmd->frame_count,pthru->cmd,pthru->target_id,pthru->lun,pthru->cdb_len , pthru->data_xfer_len,pthru->sense_buf_phys_addr_lo,sgcount);
- }
- if(megasas_dbg_lvl & MEGASAS_DBG_LVL){
- for (n = 0; n < sgcount; n++){
- if (IS_DMA64)
- printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%08lx ",mfi_sgl->sge64[n].length , (unsigned long)mfi_sgl->sge64[n].phys_addr) ;
- else
- printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%x ",mfi_sgl->sge32[n].length , mfi_sgl->sge32[n].phys_addr) ;
- }
- }
- printk(KERN_ERR "\n");
- } /*for max_cmd*/
- printk(KERN_ERR "\nmegasas[%d]: Pending Internal cmds in FW : \n",instance->host->host_no);
- for (i = 0; i < max_cmd; i++) {
-
- cmd = instance->cmd_list[i];
-
- if(cmd->sync_cmd == 1){
- printk(KERN_ERR "0x%08lx : ", (unsigned long)cmd->frame_phys_addr);
- }
- }
- printk(KERN_ERR "megasas[%d]: Dumping Done.\n\n",instance->host->host_no);
-}
-
-/**
- * megasas_queue_command - Queue entry point
- * @scmd: SCSI command to be queued
- * @done: Callback entry point
- */
-static int
-megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
-{
- u32 frame_count;
- struct megasas_cmd *cmd;
- struct megasas_instance *instance;
- unsigned long flags;
-
- instance = (struct megasas_instance *)
- scmd->device->host->hostdata;
-
- if (instance->issuepend_done == 0)
- return SCSI_MLQUEUE_HOST_BUSY;
-
- spin_lock_irqsave(&instance->hba_lock, flags);
- if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) {
- spin_unlock_irqrestore(&instance->hba_lock, flags);
- return SCSI_MLQUEUE_HOST_BUSY;
- }
-
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- scmd->scsi_done = done;
- scmd->result = 0;
-
- if (MEGASAS_IS_LOGICAL(scmd) &&
- (scmd->device->id >= MEGASAS_MAX_LD || scmd->device->lun)) {
- scmd->result = DID_BAD_TARGET << 16;
- goto out_done;
- }
-
- switch (scmd->cmnd[0]) {
- case SYNCHRONIZE_CACHE:
- /*
- * FW takes care of flush cache on its own
- * No need to send it down
- */
- scmd->result = DID_OK << 16;
- goto out_done;
- default:
- break;
- }
-
- cmd = megasas_get_cmd(instance);
- if (!cmd)
- return SCSI_MLQUEUE_HOST_BUSY;
-
- /*
- * Logical drive command
- */
- if (megasas_is_ldio(scmd))
- frame_count = megasas_build_ldio(instance, scmd, cmd);
- else
- frame_count = megasas_build_dcdb(instance, scmd, cmd);
-
- if (!frame_count)
- goto out_return_cmd;
-
- cmd->scmd = scmd;
- scmd->SCp.ptr = (char *)cmd;
-
- /*
- * Issue the command to the FW
- */
- atomic_inc(&instance->fw_outstanding);
-
- instance->instancet->fire_cmd(instance, cmd->frame_phys_addr,
- cmd->frame_count-1, instance->reg_set);
- /*
- * Check if we have pend cmds to be completed
- */
- if (poll_mode_io && atomic_read(&instance->fw_outstanding))
- tasklet_schedule(&instance->isr_tasklet);
-
-
- return 0;
-
- out_return_cmd:
- megasas_return_cmd(instance, cmd);
- out_done:
- done(scmd);
- return 0;
-}
-
-static int megasas_slave_configure(struct scsi_device *sdev)
-{
- /*
- * Don't export physical disk devices to the disk driver.
- *
- * FIXME: Currently we don't export them to the midlayer at all.
- * That will be fixed once LSI engineers have audited the
- * firmware for possible issues.
- */
- if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK)
- return -ENXIO;
-
- /*
- * The RAID firmware may require extended timeouts.
- */
- if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS)
- blk_queue_rq_timeout(sdev->request_queue,
- MEGASAS_DEFAULT_CMD_TIMEOUT * HZ);
- return 0;
-}
-
-static void megaraid_sas_kill_hba(struct megasas_instance *instance)
-{
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- writel(MFI_STOP_ADP,
- &instance->reg_set->reserved_0[0]);
- } else {
- writel(MFI_STOP_ADP,
- &instance->reg_set->inbound_doorbell);
- }
-}
-
-/**
- * megasas_complete_cmd_dpc - Returns FW's controller structure
- * @instance_addr: Address of adapter soft state
- *
- * Tasklet to complete cmds
- */
-static void megasas_complete_cmd_dpc(unsigned long instance_addr)
-{
- u32 producer;
- u32 consumer;
- u32 context;
- struct megasas_cmd *cmd;
- struct megasas_instance *instance =
- (struct megasas_instance *)instance_addr;
- unsigned long flags;
-
- /* If we have already declared adapter dead, donot complete cmds */
- if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR )
- return;
-
- spin_lock_irqsave(&instance->completion_lock, flags);
-
- producer = *instance->producer;
- consumer = *instance->consumer;
-
- while (consumer != producer) {
- context = instance->reply_queue[consumer];
- if (context >= instance->max_fw_cmds) {
- printk(KERN_ERR "Unexpected context value %x\n",
- context);
- BUG();
- }
-
- cmd = instance->cmd_list[context];
-
- megasas_complete_cmd(instance, cmd, DID_OK);
-
- consumer++;
- if (consumer == (instance->max_fw_cmds + 1)) {
- consumer = 0;
- }
- }
-
- *instance->consumer = producer;
-
- spin_unlock_irqrestore(&instance->completion_lock, flags);
-
- /*
- * Check if we can restore can_queue
- */
- if (instance->flag & MEGASAS_FW_BUSY
- && time_after(jiffies, instance->last_time + 5 * HZ)
- && atomic_read(&instance->fw_outstanding) < 17) {
-
- spin_lock_irqsave(instance->host->host_lock, flags);
- instance->flag &= ~MEGASAS_FW_BUSY;
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- instance->host->can_queue =
- instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
- } else
- instance->host->can_queue =
- instance->max_fw_cmds - MEGASAS_INT_CMDS;
-
- spin_unlock_irqrestore(instance->host->host_lock, flags);
- }
-}
-
-/**
- * megasas_wait_for_outstanding - Wait for all outstanding cmds
- * @instance: Adapter soft state
- *
- * This function waits for upto MEGASAS_RESET_WAIT_TIME seconds for FW to
- * complete all its outstanding commands. Returns error if one or more IOs
- * are pending after this time period. It also marks the controller dead.
- */
-static int megasas_wait_for_outstanding(struct megasas_instance *instance)
-{
- int i;
- u32 reset_index;
- u32 wait_time = MEGASAS_RESET_WAIT_TIME;
- u8 adprecovery;
- unsigned long flags;
- struct list_head clist_local;
- struct megasas_cmd *reset_cmd;
-
- spin_lock_irqsave(&instance->hba_lock, flags);
- adprecovery = instance->adprecovery;
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- if (adprecovery != MEGASAS_HBA_OPERATIONAL) {
-
- INIT_LIST_HEAD(&clist_local);
- spin_lock_irqsave(&instance->hba_lock, flags);
- list_splice_init(&instance->internal_reset_pending_q,
- &clist_local);
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- printk(KERN_NOTICE "megasas: HBA reset wait ...\n");
- for (i = 0; i < wait_time; i++) {
- msleep(1000);
- spin_lock_irqsave(&instance->hba_lock, flags);
- adprecovery = instance->adprecovery;
- spin_unlock_irqrestore(&instance->hba_lock, flags);
- if (adprecovery == MEGASAS_HBA_OPERATIONAL)
- break;
- }
-
- if (adprecovery != MEGASAS_HBA_OPERATIONAL) {
- printk(KERN_NOTICE "megasas: reset: Stopping HBA.\n");
- spin_lock_irqsave(&instance->hba_lock, flags);
- instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
- spin_unlock_irqrestore(&instance->hba_lock, flags);
- return FAILED;
- }
-
- reset_index = 0;
- while (!list_empty(&clist_local)) {
- reset_cmd = list_entry((&clist_local)->next,
- struct megasas_cmd, list);
- list_del_init(&reset_cmd->list);
- if (reset_cmd->scmd) {
- reset_cmd->scmd->result = DID_RESET << 16;
- printk(KERN_NOTICE "%d:%p reset [%02x], %#lx\n",
- reset_index, reset_cmd,
- reset_cmd->scmd->cmnd[0],
- reset_cmd->scmd->serial_number);
-
- reset_cmd->scmd->scsi_done(reset_cmd->scmd);
- megasas_return_cmd(instance, reset_cmd);
- } else if (reset_cmd->sync_cmd) {
- printk(KERN_NOTICE "megasas:%p synch cmds"
- "reset queue\n",
- reset_cmd);
-
- reset_cmd->cmd_status = ENODATA;
- instance->instancet->fire_cmd(instance,
- reset_cmd->frame_phys_addr,
- 0, instance->reg_set);
- } else {
- printk(KERN_NOTICE "megasas: %p unexpected"
- "cmds lst\n",
- reset_cmd);
- }
- reset_index++;
- }
-
- return SUCCESS;
- }
-
- for (i = 0; i < wait_time; i++) {
-
- int outstanding = atomic_read(&instance->fw_outstanding);
-
- if (!outstanding)
- break;
-
- if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
- printk(KERN_NOTICE "megasas: [%2d]waiting for %d "
- "commands to complete\n",i,outstanding);
- /*
- * Call cmd completion routine. Cmd to be
- * be completed directly without depending on isr.
- */
- megasas_complete_cmd_dpc((unsigned long)instance);
- }
-
- msleep(1000);
- }
-
- if (atomic_read(&instance->fw_outstanding)) {
- printk(KERN_NOTICE "megaraid_sas: pending cmds after reset\n");
- /*
- * Send signal to FW to stop processing any pending cmds.
- * The controller will be taken offline by the OS now.
- */
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- writel(MFI_STOP_ADP,
- &instance->reg_set->reserved_0[0]);
- } else {
- writel(MFI_STOP_ADP,
- &instance->reg_set->inbound_doorbell);
- }
- megasas_dump_pending_frames(instance);
- spin_lock_irqsave(&instance->hba_lock, flags);
- instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
- spin_unlock_irqrestore(&instance->hba_lock, flags);
- return FAILED;
- }
-
- printk(KERN_NOTICE "megaraid_sas: no pending cmds after reset\n");
-
- return SUCCESS;
-}
-
-/**
- * megasas_generic_reset - Generic reset routine
- * @scmd: Mid-layer SCSI command
- *
- * This routine implements a generic reset handler for device, bus and host
- * reset requests. Device, bus and host specific reset handlers can use this
- * function after they do their specific tasks.
- */
-static int megasas_generic_reset(struct scsi_cmnd *scmd)
-{
- int ret_val;
- struct megasas_instance *instance;
-
- instance = (struct megasas_instance *)scmd->device->host->hostdata;
-
- scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x retries=%x\n",
- scmd->serial_number, scmd->cmnd[0], scmd->retries);
-
- if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
- printk(KERN_ERR "megasas: cannot recover from previous reset "
- "failures\n");
- return FAILED;
- }
-
- ret_val = megasas_wait_for_outstanding(instance);
- if (ret_val == SUCCESS)
- printk(KERN_NOTICE "megasas: reset successful \n");
- else
- printk(KERN_ERR "megasas: failed to do reset\n");
-
- return ret_val;
-}
-
-/**
- * megasas_reset_timer - quiesce the adapter if required
- * @scmd: scsi cmnd
- *
- * Sets the FW busy flag and reduces the host->can_queue if the
- * cmd has not been completed within the timeout period.
- */
-static enum
-blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
-{
- struct megasas_cmd *cmd = (struct megasas_cmd *)scmd->SCp.ptr;
- struct megasas_instance *instance;
- unsigned long flags;
-
- if (time_after(jiffies, scmd->jiffies_at_alloc +
- (MEGASAS_DEFAULT_CMD_TIMEOUT * 2) * HZ)) {
- return BLK_EH_NOT_HANDLED;
- }
-
- instance = cmd->instance;
- if (!(instance->flag & MEGASAS_FW_BUSY)) {
- /* FW is busy, throttle IO */
- spin_lock_irqsave(instance->host->host_lock, flags);
-
- instance->host->can_queue = 16;
- instance->last_time = jiffies;
- instance->flag |= MEGASAS_FW_BUSY;
-
- spin_unlock_irqrestore(instance->host->host_lock, flags);
- }
- return BLK_EH_RESET_TIMER;
-}
-
-/**
- * megasas_reset_device - Device reset handler entry point
- */
-static int megasas_reset_device(struct scsi_cmnd *scmd)
-{
- int ret;
-
- /*
- * First wait for all commands to complete
- */
- ret = megasas_generic_reset(scmd);
-
- return ret;
-}
-
-/**
- * megasas_reset_bus_host - Bus & host reset handler entry point
- */
-static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
-{
- int ret;
-
- /*
- * First wait for all commands to complete
- */
- ret = megasas_generic_reset(scmd);
-
- return ret;
-}
-
-/**
- * megasas_bios_param - Returns disk geometry for a disk
- * @sdev: device handle
- * @bdev: block device
- * @capacity: drive capacity
- * @geom: geometry parameters
- */
-static int
-megasas_bios_param(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int geom[])
-{
- int heads;
- int sectors;
- sector_t cylinders;
- unsigned long tmp;
- /* Default heads (64) & sectors (32) */
- heads = 64;
- sectors = 32;
-
- tmp = heads * sectors;
- cylinders = capacity;
-
- sector_div(cylinders, tmp);
-
- /*
- * Handle extended translation size for logical drives > 1Gb
- */
-
- if (capacity >= 0x200000) {
- heads = 255;
- sectors = 63;
- tmp = heads*sectors;
- cylinders = capacity;
- sector_div(cylinders, tmp);
- }
-
- geom[0] = heads;
- geom[1] = sectors;
- geom[2] = cylinders;
-
- return 0;
-}
-
-static void megasas_aen_polling(struct work_struct *work);
-
-/**
- * megasas_service_aen - Processes an event notification
- * @instance: Adapter soft state
- * @cmd: AEN command completed by the ISR
- *
- * For AEN, driver sends a command down to FW that is held by the FW till an
- * event occurs. When an event of interest occurs, FW completes the command
- * that it was previously holding.
- *
- * This routines sends SIGIO signal to processes that have registered with the
- * driver for AEN.
- */
-static void
-megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd)
-{
- unsigned long flags;
- /*
- * Don't signal app if it is just an aborted previously registered aen
- */
- if ((!cmd->abort_aen) && (instance->unload == 0)) {
- spin_lock_irqsave(&poll_aen_lock, flags);
- megasas_poll_wait_aen = 1;
- spin_unlock_irqrestore(&poll_aen_lock, flags);
- wake_up(&megasas_poll_wait);
- kill_fasync(&megasas_async_queue, SIGIO, POLL_IN);
- }
- else
- cmd->abort_aen = 0;
-
- instance->aen_cmd = NULL;
- megasas_return_cmd(instance, cmd);
-
- if ((instance->unload == 0) &&
- ((instance->issuepend_done == 1))) {
- struct megasas_aen_event *ev;
- ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
- if (!ev) {
- printk(KERN_ERR "megasas_service_aen: out of memory\n");
- } else {
- ev->instance = instance;
- instance->ev = ev;
- INIT_WORK(&ev->hotplug_work, megasas_aen_polling);
- schedule_delayed_work(
- (struct delayed_work *)&ev->hotplug_work, 0);
- }
- }
-}
-
-/*
- * Scsi host template for megaraid_sas driver
- */
-static struct scsi_host_template megasas_template = {
-
- .module = THIS_MODULE,
- .name = "LSI SAS based MegaRAID driver",
- .proc_name = "megaraid_sas",
- .slave_configure = megasas_slave_configure,
- .queuecommand = megasas_queue_command,
- .eh_device_reset_handler = megasas_reset_device,
- .eh_bus_reset_handler = megasas_reset_bus_host,
- .eh_host_reset_handler = megasas_reset_bus_host,
- .eh_timed_out = megasas_reset_timer,
- .bios_param = megasas_bios_param,
- .use_clustering = ENABLE_CLUSTERING,
-};
-
-/**
- * megasas_complete_int_cmd - Completes an internal command
- * @instance: Adapter soft state
- * @cmd: Command to be completed
- *
- * The megasas_issue_blocked_cmd() function waits for a command to complete
- * after it issues a command. This function wakes up that waiting routine by
- * calling wake_up() on the wait queue.
- */
-static void
-megasas_complete_int_cmd(struct megasas_instance *instance,
- struct megasas_cmd *cmd)
-{
- cmd->cmd_status = cmd->frame->io.cmd_status;
-
- if (cmd->cmd_status == ENODATA) {
- cmd->cmd_status = 0;
- }
- wake_up(&instance->int_cmd_wait_q);
-}
-
-/**
- * megasas_complete_abort - Completes aborting a command
- * @instance: Adapter soft state
- * @cmd: Cmd that was issued to abort another cmd
- *
- * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q
- * after it issues an abort on a previously issued command. This function
- * wakes up all functions waiting on the same wait queue.
- */
-static void
-megasas_complete_abort(struct megasas_instance *instance,
- struct megasas_cmd *cmd)
-{
- if (cmd->sync_cmd) {
- cmd->sync_cmd = 0;
- cmd->cmd_status = 0;
- wake_up(&instance->abort_cmd_wait_q);
- }
-
- return;
-}
-
-/**
- * megasas_complete_cmd - Completes a command
- * @instance: Adapter soft state
- * @cmd: Command to be completed
- * @alt_status: If non-zero, use this value as status to
- * SCSI mid-layer instead of the value returned
- * by the FW. This should be used if caller wants
- * an alternate status (as in the case of aborted
- * commands)
- */
-static void
-megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
- u8 alt_status)
-{
- int exception = 0;
- struct megasas_header *hdr = &cmd->frame->hdr;
- unsigned long flags;
-
- /* flag for the retry reset */
- cmd->retry_for_fw_reset = 0;
-
- if (cmd->scmd)
- cmd->scmd->SCp.ptr = NULL;
-
- switch (hdr->cmd) {
-
- case MFI_CMD_PD_SCSI_IO:
- case MFI_CMD_LD_SCSI_IO:
-
- /*
- * MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been
- * issued either through an IO path or an IOCTL path. If it
- * was via IOCTL, we will send it to internal completion.
- */
- if (cmd->sync_cmd) {
- cmd->sync_cmd = 0;
- megasas_complete_int_cmd(instance, cmd);
- break;
- }
-
- case MFI_CMD_LD_READ:
- case MFI_CMD_LD_WRITE:
-
- if (alt_status) {
- cmd->scmd->result = alt_status << 16;
- exception = 1;
- }
-
- if (exception) {
-
- atomic_dec(&instance->fw_outstanding);
-
- scsi_dma_unmap(cmd->scmd);
- cmd->scmd->scsi_done(cmd->scmd);
- megasas_return_cmd(instance, cmd);
-
- break;
- }
-
- switch (hdr->cmd_status) {
-
- case MFI_STAT_OK:
- cmd->scmd->result = DID_OK << 16;
- break;
-
- case MFI_STAT_SCSI_IO_FAILED:
- case MFI_STAT_LD_INIT_IN_PROGRESS:
- cmd->scmd->result =
- (DID_ERROR << 16) | hdr->scsi_status;
- break;
-
- case MFI_STAT_SCSI_DONE_WITH_ERROR:
-
- cmd->scmd->result = (DID_OK << 16) | hdr->scsi_status;
-
- if (hdr->scsi_status == SAM_STAT_CHECK_CONDITION) {
- memset(cmd->scmd->sense_buffer, 0,
- SCSI_SENSE_BUFFERSIZE);
- memcpy(cmd->scmd->sense_buffer, cmd->sense,
- hdr->sense_len);
-
- cmd->scmd->result |= DRIVER_SENSE << 24;
- }
-
- break;
-
- case MFI_STAT_LD_OFFLINE:
- case MFI_STAT_DEVICE_NOT_FOUND:
- cmd->scmd->result = DID_BAD_TARGET << 16;
- break;
-
- default:
- printk(KERN_DEBUG "megasas: MFI FW status %#x\n",
- hdr->cmd_status);
- cmd->scmd->result = DID_ERROR << 16;
- break;
- }
-
- atomic_dec(&instance->fw_outstanding);
-
- scsi_dma_unmap(cmd->scmd);
- cmd->scmd->scsi_done(cmd->scmd);
- megasas_return_cmd(instance, cmd);
-
- break;
-
- case MFI_CMD_SMP:
- case MFI_CMD_STP:
- case MFI_CMD_DCMD:
- if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET_INFO ||
- cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET) {
- spin_lock_irqsave(&poll_aen_lock, flags);
- megasas_poll_wait_aen = 0;
- spin_unlock_irqrestore(&poll_aen_lock, flags);
- }
-
- /*
- * See if got an event notification
- */
- if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_WAIT)
- megasas_service_aen(instance, cmd);
- else
- megasas_complete_int_cmd(instance, cmd);
-
- break;
-
- case MFI_CMD_ABORT:
- /*
- * Cmd issued to abort another cmd returned
- */
- megasas_complete_abort(instance, cmd);
- break;
-
- default:
- printk("megasas: Unknown command completed! [0x%X]\n",
- hdr->cmd);
- break;
- }
-}
-
-/**
- * megasas_issue_pending_cmds_again - issue all pending cmds
- * in FW again because of the fw reset
- * @instance: Adapter soft state
- */
-static inline void
-megasas_issue_pending_cmds_again(struct megasas_instance *instance)
-{
- struct megasas_cmd *cmd;
- struct list_head clist_local;
- union megasas_evt_class_locale class_locale;
- unsigned long flags;
- u32 seq_num;
-
- INIT_LIST_HEAD(&clist_local);
- spin_lock_irqsave(&instance->hba_lock, flags);
- list_splice_init(&instance->internal_reset_pending_q, &clist_local);
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- while (!list_empty(&clist_local)) {
- cmd = list_entry((&clist_local)->next,
- struct megasas_cmd, list);
- list_del_init(&cmd->list);
-
- if (cmd->sync_cmd || cmd->scmd) {
- printk(KERN_NOTICE "megaraid_sas: command %p, %p:%d"
- "detected to be pending while HBA reset.\n",
- cmd, cmd->scmd, cmd->sync_cmd);
-
- cmd->retry_for_fw_reset++;
-
- if (cmd->retry_for_fw_reset == 3) {
- printk(KERN_NOTICE "megaraid_sas: cmd %p, %p:%d"
- "was tried multiple times during reset."
- "Shutting down the HBA\n",
- cmd, cmd->scmd, cmd->sync_cmd);
- megaraid_sas_kill_hba(instance);
-
- instance->adprecovery =
- MEGASAS_HW_CRITICAL_ERROR;
- return;
- }
- }
-
- if (cmd->sync_cmd == 1) {
- if (cmd->scmd) {
- printk(KERN_NOTICE "megaraid_sas: unexpected"
- "cmd attached to internal command!\n");
- }
- printk(KERN_NOTICE "megasas: %p synchronous cmd"
- "on the internal reset queue,"
- "issue it again.\n", cmd);
- cmd->cmd_status = ENODATA;
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr ,
- 0, instance->reg_set);
- } else if (cmd->scmd) {
- printk(KERN_NOTICE "megasas: %p scsi cmd [%02x],%#lx"
- "detected on the internal queue, issue again.\n",
- cmd, cmd->scmd->cmnd[0], cmd->scmd->serial_number);
-
- atomic_inc(&instance->fw_outstanding);
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr,
- cmd->frame_count-1, instance->reg_set);
- } else {
- printk(KERN_NOTICE "megasas: %p unexpected cmd on the"
- "internal reset defer list while re-issue!!\n",
- cmd);
- }
- }
-
- if (instance->aen_cmd) {
- printk(KERN_NOTICE "megaraid_sas: aen_cmd in def process\n");
- megasas_return_cmd(instance, instance->aen_cmd);
-
- instance->aen_cmd = NULL;
- }
-
- /*
- * Initiate AEN (Asynchronous Event Notification)
- */
- seq_num = instance->last_seq_num;
- class_locale.members.reserved = 0;
- class_locale.members.locale = MR_EVT_LOCALE_ALL;
- class_locale.members.class = MR_EVT_CLASS_DEBUG;
-
- megasas_register_aen(instance, seq_num, class_locale.word);
-}
-
-/**
- * Move the internal reset pending commands to a deferred queue.
- *
- * We move the commands pending at internal reset time to a
- * pending queue. This queue would be flushed after successful
- * completion of the internal reset sequence. if the internal reset
- * did not complete in time, the kernel reset handler would flush
- * these commands.
- **/
-static void
-megasas_internal_reset_defer_cmds(struct megasas_instance *instance)
-{
- struct megasas_cmd *cmd;
- int i;
- u32 max_cmd = instance->max_fw_cmds;
- u32 defer_index;
- unsigned long flags;
-
- defer_index = 0;
- spin_lock_irqsave(&instance->cmd_pool_lock, flags);
- for (i = 0; i < max_cmd; i++) {
- cmd = instance->cmd_list[i];
- if (cmd->sync_cmd == 1 || cmd->scmd) {
- printk(KERN_NOTICE "megasas: moving cmd[%d]:%p:%d:%p"
- "on the defer queue as internal\n",
- defer_index, cmd, cmd->sync_cmd, cmd->scmd);
-
- if (!list_empty(&cmd->list)) {
- printk(KERN_NOTICE "megaraid_sas: ERROR while"
- " moving this cmd:%p, %d %p, it was"
- "discovered on some list?\n",
- cmd, cmd->sync_cmd, cmd->scmd);
-
- list_del_init(&cmd->list);
- }
- defer_index++;
- list_add_tail(&cmd->list,
- &instance->internal_reset_pending_q);
- }
- }
- spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
-}
-
-
-static void
-process_fw_state_change_wq(struct work_struct *work)
-{
- struct megasas_instance *instance =
- container_of(work, struct megasas_instance, work_init);
- u32 wait;
- unsigned long flags;
-
- if (instance->adprecovery != MEGASAS_ADPRESET_SM_INFAULT) {
- printk(KERN_NOTICE "megaraid_sas: error, recovery st %x \n",
- instance->adprecovery);
- return ;
- }
-
- if (instance->adprecovery == MEGASAS_ADPRESET_SM_INFAULT) {
- printk(KERN_NOTICE "megaraid_sas: FW detected to be in fault"
- "state, restarting it...\n");
-
- instance->instancet->disable_intr(instance->reg_set);
- atomic_set(&instance->fw_outstanding, 0);
-
- atomic_set(&instance->fw_reset_no_pci_access, 1);
- instance->instancet->adp_reset(instance, instance->reg_set);
- atomic_set(&instance->fw_reset_no_pci_access, 0 );
-
- printk(KERN_NOTICE "megaraid_sas: FW restarted successfully,"
- "initiating next stage...\n");
-
- printk(KERN_NOTICE "megaraid_sas: HBA recovery state machine,"
- "state 2 starting...\n");
-
- /*waitting for about 20 second before start the second init*/
- for (wait = 0; wait < 30; wait++) {
- msleep(1000);
- }
-
- if (megasas_transition_to_ready(instance)) {
- printk(KERN_NOTICE "megaraid_sas:adapter not ready\n");
-
- megaraid_sas_kill_hba(instance);
- instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
- return ;
- }
-
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1064R) ||
- (instance->pdev->device == PCI_DEVICE_ID_DELL_PERC5) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_VERDE_ZCR)
- ) {
- *instance->consumer = *instance->producer;
- } else {
- *instance->consumer = 0;
- *instance->producer = 0;
- }
-
- megasas_issue_init_mfi(instance);
-
- spin_lock_irqsave(&instance->hba_lock, flags);
- instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
- spin_unlock_irqrestore(&instance->hba_lock, flags);
- instance->instancet->enable_intr(instance->reg_set);
-
- megasas_issue_pending_cmds_again(instance);
- instance->issuepend_done = 1;
- }
- return ;
-}
-
-/**
- * megasas_deplete_reply_queue - Processes all completed commands
- * @instance: Adapter soft state
- * @alt_status: Alternate status to be returned to
- * SCSI mid-layer instead of the status
- * returned by the FW
- * Note: this must be called with hba lock held
- */
-static int
-megasas_deplete_reply_queue(struct megasas_instance *instance,
- u8 alt_status)
-{
- u32 mfiStatus;
- u32 fw_state;
-
- if ((mfiStatus = instance->instancet->check_reset(instance,
- instance->reg_set)) == 1) {
- return IRQ_HANDLED;
- }
-
- if ((mfiStatus = instance->instancet->clear_intr(
- instance->reg_set)
- ) == 0) {
- return IRQ_NONE;
- }
-
- instance->mfiStatus = mfiStatus;
-
- if ((mfiStatus & MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE)) {
- fw_state = instance->instancet->read_fw_status_reg(
- instance->reg_set) & MFI_STATE_MASK;
-
- if (fw_state != MFI_STATE_FAULT) {
- printk(KERN_NOTICE "megaraid_sas: fw state:%x\n",
- fw_state);
- }
-
- if ((fw_state == MFI_STATE_FAULT) &&
- (instance->disableOnlineCtrlReset == 0)) {
- printk(KERN_NOTICE "megaraid_sas: wait adp restart\n");
-
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS1064R) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_DELL_PERC5) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_VERDE_ZCR)) {
-
- *instance->consumer =
- MEGASAS_ADPRESET_INPROG_SIGN;
- }
-
-
- instance->instancet->disable_intr(instance->reg_set);
- instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT;
- instance->issuepend_done = 0;
-
- atomic_set(&instance->fw_outstanding, 0);
- megasas_internal_reset_defer_cmds(instance);
-
- printk(KERN_NOTICE "megasas: fwState=%x, stage:%d\n",
- fw_state, instance->adprecovery);
-
- schedule_work(&instance->work_init);
- return IRQ_HANDLED;
-
- } else {
- printk(KERN_NOTICE "megasas: fwstate:%x, dis_OCR=%x\n",
- fw_state, instance->disableOnlineCtrlReset);
- }
- }
-
- tasklet_schedule(&instance->isr_tasklet);
- return IRQ_HANDLED;
-}
-/**
- * megasas_isr - isr entry point
- */
-static irqreturn_t megasas_isr(int irq, void *devp)
-{
- struct megasas_instance *instance;
- unsigned long flags;
- irqreturn_t rc;
-
- if (atomic_read(
- &(((struct megasas_instance *)devp)->fw_reset_no_pci_access)))
- return IRQ_HANDLED;
-
- instance = (struct megasas_instance *)devp;
-
- spin_lock_irqsave(&instance->hba_lock, flags);
- rc = megasas_deplete_reply_queue(instance, DID_OK);
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- return rc;
-}
-
-/**
- * megasas_transition_to_ready - Move the FW to READY state
- * @instance: Adapter soft state
- *
- * During the initialization, FW passes can potentially be in any one of
- * several possible states. If the FW in operational, waiting-for-handshake
- * states, driver must take steps to bring it to ready state. Otherwise, it
- * has to wait for the ready state.
- */
-static int
-megasas_transition_to_ready(struct megasas_instance* instance)
-{
- int i;
- u8 max_wait;
- u32 fw_state;
- u32 cur_state;
-
- fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
-
- if (fw_state != MFI_STATE_READY)
- printk(KERN_INFO "megasas: Waiting for FW to come to ready"
- " state\n");
-
- while (fw_state != MFI_STATE_READY) {
-
- switch (fw_state) {
-
- case MFI_STATE_FAULT:
-
- printk(KERN_DEBUG "megasas: FW in FAULT state!!\n");
- return -ENODEV;
-
- case MFI_STATE_WAIT_HANDSHAKE:
- /*
- * Set the CLR bit in inbound doorbell
- */
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
-
- writel(
- MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
- &instance->reg_set->reserved_0[0]);
- } else {
- writel(
- MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
- &instance->reg_set->inbound_doorbell);
- }
-
- max_wait = 2;
- cur_state = MFI_STATE_WAIT_HANDSHAKE;
- break;
-
- case MFI_STATE_BOOT_MESSAGE_PENDING:
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- writel(MFI_INIT_HOTPLUG,
- &instance->reg_set->reserved_0[0]);
- } else
- writel(MFI_INIT_HOTPLUG,
- &instance->reg_set->inbound_doorbell);
-
- max_wait = 10;
- cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
- break;
-
- case MFI_STATE_OPERATIONAL:
- /*
- * Bring it to READY state; assuming max wait 10 secs
- */
- instance->instancet->disable_intr(instance->reg_set);
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- writel(MFI_RESET_FLAGS,
- &instance->reg_set->reserved_0[0]);
- } else
- writel(MFI_RESET_FLAGS,
- &instance->reg_set->inbound_doorbell);
-
- max_wait = 60;
- cur_state = MFI_STATE_OPERATIONAL;
- break;
-
- case MFI_STATE_UNDEFINED:
- /*
- * This state should not last for more than 2 seconds
- */
- max_wait = 2;
- cur_state = MFI_STATE_UNDEFINED;
- break;
-
- case MFI_STATE_BB_INIT:
- max_wait = 2;
- cur_state = MFI_STATE_BB_INIT;
- break;
-
- case MFI_STATE_FW_INIT:
- max_wait = 20;
- cur_state = MFI_STATE_FW_INIT;
- break;
-
- case MFI_STATE_FW_INIT_2:
- max_wait = 20;
- cur_state = MFI_STATE_FW_INIT_2;
- break;
-
- case MFI_STATE_DEVICE_SCAN:
- max_wait = 20;
- cur_state = MFI_STATE_DEVICE_SCAN;
- break;
-
- case MFI_STATE_FLUSH_CACHE:
- max_wait = 20;
- cur_state = MFI_STATE_FLUSH_CACHE;
- break;
-
- default:
- printk(KERN_DEBUG "megasas: Unknown state 0x%x\n",
- fw_state);
- return -ENODEV;
- }
-
- /*
- * The cur_state should not last for more than max_wait secs
- */
- for (i = 0; i < (max_wait * 1000); i++) {
- fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
- MFI_STATE_MASK ;
-
- if (fw_state == cur_state) {
- msleep(1);
- } else
- break;
- }
-
- /*
- * Return error if fw_state hasn't changed after max_wait
- */
- if (fw_state == cur_state) {
- printk(KERN_DEBUG "FW state [%d] hasn't changed "
- "in %d secs\n", fw_state, max_wait);
- return -ENODEV;
- }
- }
- printk(KERN_INFO "megasas: FW now in Ready state\n");
-
- return 0;
-}
-
-/**
- * megasas_teardown_frame_pool - Destroy the cmd frame DMA pool
- * @instance: Adapter soft state
- */
-static void megasas_teardown_frame_pool(struct megasas_instance *instance)
-{
- int i;
- u32 max_cmd = instance->max_fw_cmds;
- struct megasas_cmd *cmd;
-
- if (!instance->frame_dma_pool)
- return;
-
- /*
- * Return all frames to pool
- */
- for (i = 0; i < max_cmd; i++) {
-
- cmd = instance->cmd_list[i];
-
- if (cmd->frame)
- pci_pool_free(instance->frame_dma_pool, cmd->frame,
- cmd->frame_phys_addr);
-
- if (cmd->sense)
- pci_pool_free(instance->sense_dma_pool, cmd->sense,
- cmd->sense_phys_addr);
- }
-
- /*
- * Now destroy the pool itself
- */
- pci_pool_destroy(instance->frame_dma_pool);
- pci_pool_destroy(instance->sense_dma_pool);
-
- instance->frame_dma_pool = NULL;
- instance->sense_dma_pool = NULL;
-}
-
-/**
- * megasas_create_frame_pool - Creates DMA pool for cmd frames
- * @instance: Adapter soft state
- *
- * Each command packet has an embedded DMA memory buffer that is used for
- * filling MFI frame and the SG list that immediately follows the frame. This
- * function creates those DMA memory buffers for each command packet by using
- * PCI pool facility.
- */
-static int megasas_create_frame_pool(struct megasas_instance *instance)
-{
- int i;
- u32 max_cmd;
- u32 sge_sz;
- u32 sgl_sz;
- u32 total_sz;
- u32 frame_count;
- struct megasas_cmd *cmd;
-
- max_cmd = instance->max_fw_cmds;
-
- /*
- * Size of our frame is 64 bytes for MFI frame, followed by max SG
- * elements and finally SCSI_SENSE_BUFFERSIZE bytes for sense buffer
- */
- sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
- sizeof(struct megasas_sge32);
-
- if (instance->flag_ieee) {
- sge_sz = sizeof(struct megasas_sge_skinny);
- }
-
- /*
- * Calculated the number of 64byte frames required for SGL
- */
- sgl_sz = sge_sz * instance->max_num_sge;
- frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE - 1) / MEGAMFI_FRAME_SIZE;
- frame_count = 15;
-
- /*
- * We need one extra frame for the MFI command
- */
- frame_count++;
-
- total_sz = MEGAMFI_FRAME_SIZE * frame_count;
- /*
- * Use DMA pool facility provided by PCI layer
- */
- instance->frame_dma_pool = pci_pool_create("megasas frame pool",
- instance->pdev, total_sz, 64,
- 0);
-
- if (!instance->frame_dma_pool) {
- printk(KERN_DEBUG "megasas: failed to setup frame pool\n");
- return -ENOMEM;
- }
-
- instance->sense_dma_pool = pci_pool_create("megasas sense pool",
- instance->pdev, 128, 4, 0);
-
- if (!instance->sense_dma_pool) {
- printk(KERN_DEBUG "megasas: failed to setup sense pool\n");
-
- pci_pool_destroy(instance->frame_dma_pool);
- instance->frame_dma_pool = NULL;
-
- return -ENOMEM;
- }
-
- /*
- * Allocate and attach a frame to each of the commands in cmd_list.
- * By making cmd->index as the context instead of the &cmd, we can
- * always use 32bit context regardless of the architecture
- */
- for (i = 0; i < max_cmd; i++) {
-
- cmd = instance->cmd_list[i];
-
- cmd->frame = pci_pool_alloc(instance->frame_dma_pool,
- GFP_KERNEL, &cmd->frame_phys_addr);
-
- cmd->sense = pci_pool_alloc(instance->sense_dma_pool,
- GFP_KERNEL, &cmd->sense_phys_addr);
-
- /*
- * megasas_teardown_frame_pool() takes care of freeing
- * whatever has been allocated
- */
- if (!cmd->frame || !cmd->sense) {
- printk(KERN_DEBUG "megasas: pci_pool_alloc failed \n");
- megasas_teardown_frame_pool(instance);
- return -ENOMEM;
- }
-
- cmd->frame->io.context = cmd->index;
- cmd->frame->io.pad_0 = 0;
- }
-
- return 0;
-}
-
-/**
- * megasas_free_cmds - Free all the cmds in the free cmd pool
- * @instance: Adapter soft state
- */
-static void megasas_free_cmds(struct megasas_instance *instance)
-{
- int i;
- /* First free the MFI frame pool */
- megasas_teardown_frame_pool(instance);
-
- /* Free all the commands in the cmd_list */
- for (i = 0; i < instance->max_fw_cmds; i++)
- kfree(instance->cmd_list[i]);
-
- /* Free the cmd_list buffer itself */
- kfree(instance->cmd_list);
- instance->cmd_list = NULL;
-
- INIT_LIST_HEAD(&instance->cmd_pool);
-}
-
-/**
- * megasas_alloc_cmds - Allocates the command packets
- * @instance: Adapter soft state
- *
- * Each command that is issued to the FW, whether IO commands from the OS or
- * internal commands like IOCTLs, are wrapped in local data structure called
- * megasas_cmd. The frame embedded in this megasas_cmd is actually issued to
- * the FW.
- *
- * Each frame has a 32-bit field called context (tag). This context is used
- * to get back the megasas_cmd from the frame when a frame gets completed in
- * the ISR. Typically the address of the megasas_cmd itself would be used as
- * the context. But we wanted to keep the differences between 32 and 64 bit
- * systems to the mininum. We always use 32 bit integers for the context. In
- * this driver, the 32 bit values are the indices into an array cmd_list.
- * This array is used only to look up the megasas_cmd given the context. The
- * free commands themselves are maintained in a linked list called cmd_pool.
- */
-static int megasas_alloc_cmds(struct megasas_instance *instance)
-{
- int i;
- int j;
- u32 max_cmd;
- struct megasas_cmd *cmd;
-
- max_cmd = instance->max_fw_cmds;
-
- /*
- * instance->cmd_list is an array of struct megasas_cmd pointers.
- * Allocate the dynamic array first and then allocate individual
- * commands.
- */
- instance->cmd_list = kcalloc(max_cmd, sizeof(struct megasas_cmd*), GFP_KERNEL);
-
- if (!instance->cmd_list) {
- printk(KERN_DEBUG "megasas: out of memory\n");
- return -ENOMEM;
- }
-
-
- for (i = 0; i < max_cmd; i++) {
- instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd),
- GFP_KERNEL);
-
- if (!instance->cmd_list[i]) {
-
- for (j = 0; j < i; j++)
- kfree(instance->cmd_list[j]);
-
- kfree(instance->cmd_list);
- instance->cmd_list = NULL;
-
- return -ENOMEM;
- }
- }
-
- /*
- * Add all the commands to command pool (instance->cmd_pool)
- */
- for (i = 0; i < max_cmd; i++) {
- cmd = instance->cmd_list[i];
- memset(cmd, 0, sizeof(struct megasas_cmd));
- cmd->index = i;
- cmd->scmd = NULL;
- cmd->instance = instance;
-
- list_add_tail(&cmd->list, &instance->cmd_pool);
- }
-
- /*
- * Create a frame pool and assign one frame to each cmd
- */
- if (megasas_create_frame_pool(instance)) {
- printk(KERN_DEBUG "megasas: Error creating frame DMA pool\n");
- megasas_free_cmds(instance);
- }
-
- return 0;
-}
-
-/*
- * megasas_get_pd_list_info - Returns FW's pd_list structure
- * @instance: Adapter soft state
- * @pd_list: pd_list structure
- *
- * Issues an internal command (DCMD) to get the FW's controller PD
- * list structure. This information is mainly used to find out SYSTEM
- * supported by the FW.
- */
-static int
-megasas_get_pd_list(struct megasas_instance *instance)
-{
- int ret = 0, pd_index = 0;
- struct megasas_cmd *cmd;
- struct megasas_dcmd_frame *dcmd;
- struct MR_PD_LIST *ci;
- struct MR_PD_ADDRESS *pd_addr;
- dma_addr_t ci_h = 0;
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- printk(KERN_DEBUG "megasas (get_pd_list): Failed to get cmd\n");
- return -ENOMEM;
- }
-
- dcmd = &cmd->frame->dcmd;
-
- ci = pci_alloc_consistent(instance->pdev,
- MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST), &ci_h);
-
- if (!ci) {
- printk(KERN_DEBUG "Failed to alloc mem for pd_list\n");
- megasas_return_cmd(instance, cmd);
- return -ENOMEM;
- }
-
- memset(ci, 0, sizeof(*ci));
- memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
-
- dcmd->mbox.b[0] = MR_PD_QUERY_TYPE_EXPOSED_TO_HOST;
- dcmd->mbox.b[1] = 0;
- dcmd->cmd = MFI_CMD_DCMD;
- dcmd->cmd_status = 0xFF;
- dcmd->sge_count = 1;
- dcmd->flags = MFI_FRAME_DIR_READ;
- dcmd->timeout = 0;
- dcmd->data_xfer_len = MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST);
- dcmd->opcode = MR_DCMD_PD_LIST_QUERY;
- dcmd->sgl.sge32[0].phys_addr = ci_h;
- dcmd->sgl.sge32[0].length = MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST);
-
- if (!megasas_issue_polled(instance, cmd)) {
- ret = 0;
- } else {
- ret = -1;
- }
-
- /*
- * the following function will get the instance PD LIST.
- */
-
- pd_addr = ci->addr;
-
- if ( ret == 0 &&
- (ci->count <
- (MEGASAS_MAX_PD_CHANNELS * MEGASAS_MAX_DEV_PER_CHANNEL))) {
-
- memset(instance->pd_list, 0,
- MEGASAS_MAX_PD * sizeof(struct megasas_pd_list));
-
- for (pd_index = 0; pd_index < ci->count; pd_index++) {
-
- instance->pd_list[pd_addr->deviceId].tid =
- pd_addr->deviceId;
- instance->pd_list[pd_addr->deviceId].driveType =
- pd_addr->scsiDevType;
- instance->pd_list[pd_addr->deviceId].driveState =
- MR_PD_STATE_SYSTEM;
- pd_addr++;
- }
- }
-
- pci_free_consistent(instance->pdev,
- MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
- ci, ci_h);
- megasas_return_cmd(instance, cmd);
-
- return ret;
-}
-
-/*
- * megasas_get_ld_list_info - Returns FW's ld_list structure
- * @instance: Adapter soft state
- * @ld_list: ld_list structure
- *
- * Issues an internal command (DCMD) to get the FW's controller PD
- * list structure. This information is mainly used to find out SYSTEM
- * supported by the FW.
- */
-static int
-megasas_get_ld_list(struct megasas_instance *instance)
-{
- int ret = 0, ld_index = 0, ids = 0;
- struct megasas_cmd *cmd;
- struct megasas_dcmd_frame *dcmd;
- struct MR_LD_LIST *ci;
- dma_addr_t ci_h = 0;
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- printk(KERN_DEBUG "megasas_get_ld_list: Failed to get cmd\n");
- return -ENOMEM;
- }
-
- dcmd = &cmd->frame->dcmd;
-
- ci = pci_alloc_consistent(instance->pdev,
- sizeof(struct MR_LD_LIST),
- &ci_h);
-
- if (!ci) {
- printk(KERN_DEBUG "Failed to alloc mem in get_ld_list\n");
- megasas_return_cmd(instance, cmd);
- return -ENOMEM;
- }
-
- memset(ci, 0, sizeof(*ci));
- memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
-
- dcmd->cmd = MFI_CMD_DCMD;
- dcmd->cmd_status = 0xFF;
- dcmd->sge_count = 1;
- dcmd->flags = MFI_FRAME_DIR_READ;
- dcmd->timeout = 0;
- dcmd->data_xfer_len = sizeof(struct MR_LD_LIST);
- dcmd->opcode = MR_DCMD_LD_GET_LIST;
- dcmd->sgl.sge32[0].phys_addr = ci_h;
- dcmd->sgl.sge32[0].length = sizeof(struct MR_LD_LIST);
- dcmd->pad_0 = 0;
-
- if (!megasas_issue_polled(instance, cmd)) {
- ret = 0;
- } else {
- ret = -1;
- }
-
- /* the following function will get the instance PD LIST */
-
- if ((ret == 0) && (ci->ldCount <= MAX_LOGICAL_DRIVES)) {
- memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
-
- for (ld_index = 0; ld_index < ci->ldCount; ld_index++) {
- if (ci->ldList[ld_index].state != 0) {
- ids = ci->ldList[ld_index].ref.targetId;
- instance->ld_ids[ids] =
- ci->ldList[ld_index].ref.targetId;
- }
- }
- }
-
- pci_free_consistent(instance->pdev,
- sizeof(struct MR_LD_LIST),
- ci,
- ci_h);
-
- megasas_return_cmd(instance, cmd);
- return ret;
-}
-
-/**
- * megasas_get_controller_info - Returns FW's controller structure
- * @instance: Adapter soft state
- * @ctrl_info: Controller information structure
- *
- * Issues an internal command (DCMD) to get the FW's controller structure.
- * This information is mainly used to find out the maximum IO transfer per
- * command supported by the FW.
- */
-static int
-megasas_get_ctrl_info(struct megasas_instance *instance,
- struct megasas_ctrl_info *ctrl_info)
-{
- int ret = 0;
- struct megasas_cmd *cmd;
- struct megasas_dcmd_frame *dcmd;
- struct megasas_ctrl_info *ci;
- dma_addr_t ci_h = 0;
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- printk(KERN_DEBUG "megasas: Failed to get a free cmd\n");
- return -ENOMEM;
- }
-
- dcmd = &cmd->frame->dcmd;
-
- ci = pci_alloc_consistent(instance->pdev,
- sizeof(struct megasas_ctrl_info), &ci_h);
-
- if (!ci) {
- printk(KERN_DEBUG "Failed to alloc mem for ctrl info\n");
- megasas_return_cmd(instance, cmd);
- return -ENOMEM;
- }
-
- memset(ci, 0, sizeof(*ci));
- memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
-
- dcmd->cmd = MFI_CMD_DCMD;
- dcmd->cmd_status = 0xFF;
- dcmd->sge_count = 1;
- dcmd->flags = MFI_FRAME_DIR_READ;
- dcmd->timeout = 0;
- dcmd->data_xfer_len = sizeof(struct megasas_ctrl_info);
- dcmd->opcode = MR_DCMD_CTRL_GET_INFO;
- dcmd->sgl.sge32[0].phys_addr = ci_h;
- dcmd->sgl.sge32[0].length = sizeof(struct megasas_ctrl_info);
-
- if (!megasas_issue_polled(instance, cmd)) {
- ret = 0;
- memcpy(ctrl_info, ci, sizeof(struct megasas_ctrl_info));
- } else {
- ret = -1;
- }
-
- pci_free_consistent(instance->pdev, sizeof(struct megasas_ctrl_info),
- ci, ci_h);
-
- megasas_return_cmd(instance, cmd);
- return ret;
-}
-
-/**
- * megasas_issue_init_mfi - Initializes the FW
- * @instance: Adapter soft state
- *
- * Issues the INIT MFI cmd
- */
-static int
-megasas_issue_init_mfi(struct megasas_instance *instance)
-{
- u32 context;
-
- struct megasas_cmd *cmd;
-
- struct megasas_init_frame *init_frame;
- struct megasas_init_queue_info *initq_info;
- dma_addr_t init_frame_h;
- dma_addr_t initq_info_h;
-
- /*
- * Prepare a init frame. Note the init frame points to queue info
- * structure. Each frame has SGL allocated after first 64 bytes. For
- * this frame - since we don't need any SGL - we use SGL's space as
- * queue info structure
- *
- * We will not get a NULL command below. We just created the pool.
- */
- cmd = megasas_get_cmd(instance);
-
- init_frame = (struct megasas_init_frame *)cmd->frame;
- initq_info = (struct megasas_init_queue_info *)
- ((unsigned long)init_frame + 64);
-
- init_frame_h = cmd->frame_phys_addr;
- initq_info_h = init_frame_h + 64;
-
- context = init_frame->context;
- memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
- memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
- init_frame->context = context;
-
- initq_info->reply_queue_entries = instance->max_fw_cmds + 1;
- initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h;
-
- initq_info->producer_index_phys_addr_lo = instance->producer_h;
- initq_info->consumer_index_phys_addr_lo = instance->consumer_h;
-
- init_frame->cmd = MFI_CMD_INIT;
- init_frame->cmd_status = 0xFF;
- init_frame->queue_info_new_phys_addr_lo = initq_info_h;
-
- init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info);
-
- /*
- * disable the intr before firing the init frame to FW
- */
- instance->instancet->disable_intr(instance->reg_set);
-
- /*
- * Issue the init frame in polled mode
- */
-
- if (megasas_issue_polled(instance, cmd)) {
- printk(KERN_ERR "megasas: Failed to init firmware\n");
- megasas_return_cmd(instance, cmd);
- goto fail_fw_init;
- }
-
- megasas_return_cmd(instance, cmd);
-
- return 0;
-
-fail_fw_init:
- return -EINVAL;
-}
-
-/**
- * megasas_start_timer - Initializes a timer object
- * @instance: Adapter soft state
- * @timer: timer object to be initialized
- * @fn: timer function
- * @interval: time interval between timer function call
- */
-static inline void
-megasas_start_timer(struct megasas_instance *instance,
- struct timer_list *timer,
- void *fn, unsigned long interval)
-{
- init_timer(timer);
- timer->expires = jiffies + interval;
- timer->data = (unsigned long)instance;
- timer->function = fn;
- add_timer(timer);
-}
-
-/**
- * megasas_io_completion_timer - Timer fn
- * @instance_addr: Address of adapter soft state
- *
- * Schedules tasklet for cmd completion
- * if poll_mode_io is set
- */
-static void
-megasas_io_completion_timer(unsigned long instance_addr)
-{
- struct megasas_instance *instance =
- (struct megasas_instance *)instance_addr;
-
- if (atomic_read(&instance->fw_outstanding))
- tasklet_schedule(&instance->isr_tasklet);
-
- /* Restart timer */
- if (poll_mode_io)
- mod_timer(&instance->io_completion_timer,
- jiffies + MEGASAS_COMPLETION_TIMER_INTERVAL);
-}
-
-/**
- * megasas_init_mfi - Initializes the FW
- * @instance: Adapter soft state
- *
- * This is the main function for initializing MFI firmware.
- */
-static int megasas_init_mfi(struct megasas_instance *instance)
-{
- u32 context_sz;
- u32 reply_q_sz;
- u32 max_sectors_1;
- u32 max_sectors_2;
- u32 tmp_sectors;
- struct megasas_register_set __iomem *reg_set;
- struct megasas_ctrl_info *ctrl_info;
- /*
- * Map the message registers
- */
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
- instance->base_addr = pci_resource_start(instance->pdev, 1);
- } else {
- instance->base_addr = pci_resource_start(instance->pdev, 0);
- }
-
- if (pci_request_regions(instance->pdev, "megasas: LSI")) {
- printk(KERN_DEBUG "megasas: IO memory region busy!\n");
- return -EBUSY;
- }
-
- instance->reg_set = ioremap_nocache(instance->base_addr, 8192);
-
- if (!instance->reg_set) {
- printk(KERN_DEBUG "megasas: Failed to map IO mem\n");
- goto fail_ioremap;
- }
-
- reg_set = instance->reg_set;
-
- switch(instance->pdev->device)
- {
- case PCI_DEVICE_ID_LSI_SAS1078R:
- case PCI_DEVICE_ID_LSI_SAS1078DE:
- instance->instancet = &megasas_instance_template_ppc;
- break;
- case PCI_DEVICE_ID_LSI_SAS1078GEN2:
- case PCI_DEVICE_ID_LSI_SAS0079GEN2:
- instance->instancet = &megasas_instance_template_gen2;
- break;
- case PCI_DEVICE_ID_LSI_SAS0073SKINNY:
- case PCI_DEVICE_ID_LSI_SAS0071SKINNY:
- instance->instancet = &megasas_instance_template_skinny;
- break;
- case PCI_DEVICE_ID_LSI_SAS1064R:
- case PCI_DEVICE_ID_DELL_PERC5:
- default:
- instance->instancet = &megasas_instance_template_xscale;
- break;
- }
-
- /*
- * We expect the FW state to be READY
- */
- if (megasas_transition_to_ready(instance))
- goto fail_ready_state;
-
- /*
- * Get various operational parameters from status register
- */
- instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
- /*
- * Reduce the max supported cmds by 1. This is to ensure that the
- * reply_q_sz (1 more than the max cmd that driver may send)
- * does not exceed max cmds that the FW can support
- */
- instance->max_fw_cmds = instance->max_fw_cmds-1;
- instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
- 0x10;
- /*
- * Create a pool of commands
- */
- if (megasas_alloc_cmds(instance))
- goto fail_alloc_cmds;
-
- /*
- * Allocate memory for reply queue. Length of reply queue should
- * be _one_ more than the maximum commands handled by the firmware.
- *
- * Note: When FW completes commands, it places corresponding contex
- * values in this circular reply queue. This circular queue is a fairly
- * typical producer-consumer queue. FW is the producer (of completed
- * commands) and the driver is the consumer.
- */
- context_sz = sizeof(u32);
- reply_q_sz = context_sz * (instance->max_fw_cmds + 1);
-
- instance->reply_queue = pci_alloc_consistent(instance->pdev,
- reply_q_sz,
- &instance->reply_queue_h);
-
- if (!instance->reply_queue) {
- printk(KERN_DEBUG "megasas: Out of DMA mem for reply queue\n");
- goto fail_reply_queue;
- }
-
- if (megasas_issue_init_mfi(instance))
- goto fail_fw_init;
-
- instance->fw_support_ieee = 0;
- instance->fw_support_ieee =
- (instance->instancet->read_fw_status_reg(reg_set) &
- 0x04000000);
-
- printk(KERN_NOTICE "megasas_init_mfi: fw_support_ieee=%d",
- instance->fw_support_ieee);
-
- if (instance->fw_support_ieee)
- instance->flag_ieee = 1;
-
- /** for passthrough
- * the following function will get the PD LIST.
- */
-
- memset(instance->pd_list, 0 ,
- (MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)));
- megasas_get_pd_list(instance);
-
- memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
- megasas_get_ld_list(instance);
-
- ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL);
-
- /*
- * Compute the max allowed sectors per IO: The controller info has two
- * limits on max sectors. Driver should use the minimum of these two.
- *
- * 1 << stripe_sz_ops.min = max sectors per strip
- *
- * Note that older firmwares ( < FW ver 30) didn't report information
- * to calculate max_sectors_1. So the number ended up as zero always.
- */
- tmp_sectors = 0;
- if (ctrl_info && !megasas_get_ctrl_info(instance, ctrl_info)) {
-
- max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) *
- ctrl_info->max_strips_per_io;
- max_sectors_2 = ctrl_info->max_request_size;
-
- tmp_sectors = min_t(u32, max_sectors_1 , max_sectors_2);
- instance->disableOnlineCtrlReset =
- ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
- }
-
- instance->max_sectors_per_req = instance->max_num_sge *
- PAGE_SIZE / 512;
- if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
- instance->max_sectors_per_req = tmp_sectors;
-
- kfree(ctrl_info);
-
- /*
- * Setup tasklet for cmd completion
- */
-
- tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
- (unsigned long)instance);
-
- /* Initialize the cmd completion timer */
- if (poll_mode_io)
- megasas_start_timer(instance, &instance->io_completion_timer,
- megasas_io_completion_timer,
- MEGASAS_COMPLETION_TIMER_INTERVAL);
- return 0;
-
- fail_fw_init:
-
- pci_free_consistent(instance->pdev, reply_q_sz,
- instance->reply_queue, instance->reply_queue_h);
- fail_reply_queue:
- megasas_free_cmds(instance);
-
- fail_alloc_cmds:
- fail_ready_state:
- iounmap(instance->reg_set);
-
- fail_ioremap:
- pci_release_regions(instance->pdev);
-
- return -EINVAL;
-}
-
-/**
- * megasas_release_mfi - Reverses the FW initialization
- * @intance: Adapter soft state
- */
-static void megasas_release_mfi(struct megasas_instance *instance)
-{
- u32 reply_q_sz = sizeof(u32) * (instance->max_fw_cmds + 1);
-
- pci_free_consistent(instance->pdev, reply_q_sz,
- instance->reply_queue, instance->reply_queue_h);
-
- megasas_free_cmds(instance);
-
- iounmap(instance->reg_set);
-
- pci_release_regions(instance->pdev);
-}
-
-/**
- * megasas_get_seq_num - Gets latest event sequence numbers
- * @instance: Adapter soft state
- * @eli: FW event log sequence numbers information
- *
- * FW maintains a log of all events in a non-volatile area. Upper layers would
- * usually find out the latest sequence number of the events, the seq number at
- * the boot etc. They would "read" all the events below the latest seq number
- * by issuing a direct fw cmd (DCMD). For the future events (beyond latest seq
- * number), they would subsribe to AEN (asynchronous event notification) and
- * wait for the events to happen.
- */
-static int
-megasas_get_seq_num(struct megasas_instance *instance,
- struct megasas_evt_log_info *eli)
-{
- struct megasas_cmd *cmd;
- struct megasas_dcmd_frame *dcmd;
- struct megasas_evt_log_info *el_info;
- dma_addr_t el_info_h = 0;
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- return -ENOMEM;
- }
-
- dcmd = &cmd->frame->dcmd;
- el_info = pci_alloc_consistent(instance->pdev,
- sizeof(struct megasas_evt_log_info),
- &el_info_h);
-
- if (!el_info) {
- megasas_return_cmd(instance, cmd);
- return -ENOMEM;
- }
-
- memset(el_info, 0, sizeof(*el_info));
- memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
-
- dcmd->cmd = MFI_CMD_DCMD;
- dcmd->cmd_status = 0x0;
- dcmd->sge_count = 1;
- dcmd->flags = MFI_FRAME_DIR_READ;
- dcmd->timeout = 0;
- dcmd->data_xfer_len = sizeof(struct megasas_evt_log_info);
- dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO;
- dcmd->sgl.sge32[0].phys_addr = el_info_h;
- dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_log_info);
-
- megasas_issue_blocked_cmd(instance, cmd);
-
- /*
- * Copy the data back into callers buffer
- */
- memcpy(eli, el_info, sizeof(struct megasas_evt_log_info));
-
- pci_free_consistent(instance->pdev, sizeof(struct megasas_evt_log_info),
- el_info, el_info_h);
-
- megasas_return_cmd(instance, cmd);
-
- return 0;
-}
-
-/**
- * megasas_register_aen - Registers for asynchronous event notification
- * @instance: Adapter soft state
- * @seq_num: The starting sequence number
- * @class_locale: Class of the event
- *
- * This function subscribes for AEN for events beyond the @seq_num. It requests
- * to be notified if and only if the event is of type @class_locale
- */
-static int
-megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
- u32 class_locale_word)
-{
- int ret_val;
- struct megasas_cmd *cmd;
- struct megasas_dcmd_frame *dcmd;
- union megasas_evt_class_locale curr_aen;
- union megasas_evt_class_locale prev_aen;
-
- /*
- * If there an AEN pending already (aen_cmd), check if the
- * class_locale of that pending AEN is inclusive of the new
- * AEN request we currently have. If it is, then we don't have
- * to do anything. In other words, whichever events the current
- * AEN request is subscribing to, have already been subscribed
- * to.
- *
- * If the old_cmd is _not_ inclusive, then we have to abort
- * that command, form a class_locale that is superset of both
- * old and current and re-issue to the FW
- */
-
- curr_aen.word = class_locale_word;
-
- if (instance->aen_cmd) {
-
- prev_aen.word = instance->aen_cmd->frame->dcmd.mbox.w[1];
-
- /*
- * A class whose enum value is smaller is inclusive of all
- * higher values. If a PROGRESS (= -1) was previously
- * registered, then a new registration requests for higher
- * classes need not be sent to FW. They are automatically
- * included.
- *
- * Locale numbers don't have such hierarchy. They are bitmap
- * values
- */
- if ((prev_aen.members.class <= curr_aen.members.class) &&
- !((prev_aen.members.locale & curr_aen.members.locale) ^
- curr_aen.members.locale)) {
- /*
- * Previously issued event registration includes
- * current request. Nothing to do.
- */
- return 0;
- } else {
- curr_aen.members.locale |= prev_aen.members.locale;
-
- if (prev_aen.members.class < curr_aen.members.class)
- curr_aen.members.class = prev_aen.members.class;
-
- instance->aen_cmd->abort_aen = 1;
- ret_val = megasas_issue_blocked_abort_cmd(instance,
- instance->
- aen_cmd);
-
- if (ret_val) {
- printk(KERN_DEBUG "megasas: Failed to abort "
- "previous AEN command\n");
- return ret_val;
- }
- }
- }
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd)
- return -ENOMEM;
-
- dcmd = &cmd->frame->dcmd;
-
- memset(instance->evt_detail, 0, sizeof(struct megasas_evt_detail));
-
- /*
- * Prepare DCMD for aen registration
- */
- memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
-
- dcmd->cmd = MFI_CMD_DCMD;
- dcmd->cmd_status = 0x0;
- dcmd->sge_count = 1;
- dcmd->flags = MFI_FRAME_DIR_READ;
- dcmd->timeout = 0;
- instance->last_seq_num = seq_num;
- dcmd->data_xfer_len = sizeof(struct megasas_evt_detail);
- dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT;
- dcmd->mbox.w[0] = seq_num;
- dcmd->mbox.w[1] = curr_aen.word;
- dcmd->sgl.sge32[0].phys_addr = (u32) instance->evt_detail_h;
- dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_detail);
-
- if (instance->aen_cmd != NULL) {
- megasas_return_cmd(instance, cmd);
- return 0;
- }
-
- /*
- * Store reference to the cmd used to register for AEN. When an
- * application wants us to register for AEN, we have to abort this
- * cmd and re-register with a new EVENT LOCALE supplied by that app
- */
- instance->aen_cmd = cmd;
-
- /*
- * Issue the aen registration frame
- */
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr, 0, instance->reg_set);
-
- return 0;
-}
-
-/**
- * megasas_start_aen - Subscribes to AEN during driver load time
- * @instance: Adapter soft state
- */
-static int megasas_start_aen(struct megasas_instance *instance)
-{
- struct megasas_evt_log_info eli;
- union megasas_evt_class_locale class_locale;
-
- /*
- * Get the latest sequence number from FW
- */
- memset(&eli, 0, sizeof(eli));
-
- if (megasas_get_seq_num(instance, &eli))
- return -1;
-
- /*
- * Register AEN with FW for latest sequence number plus 1
- */
- class_locale.members.reserved = 0;
- class_locale.members.locale = MR_EVT_LOCALE_ALL;
- class_locale.members.class = MR_EVT_CLASS_DEBUG;
-
- return megasas_register_aen(instance, eli.newest_seq_num + 1,
- class_locale.word);
-}
-
-/**
- * megasas_io_attach - Attaches this driver to SCSI mid-layer
- * @instance: Adapter soft state
- */
-static int megasas_io_attach(struct megasas_instance *instance)
-{
- struct Scsi_Host *host = instance->host;
-
- /*
- * Export parameters required by SCSI mid-layer
- */
- host->irq = instance->pdev->irq;
- host->unique_id = instance->unique_id;
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- host->can_queue =
- instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
- } else
- host->can_queue =
- instance->max_fw_cmds - MEGASAS_INT_CMDS;
- host->this_id = instance->init_id;
- host->sg_tablesize = instance->max_num_sge;
- host->max_sectors = instance->max_sectors_per_req;
- host->cmd_per_lun = 128;
- host->max_channel = MEGASAS_MAX_CHANNELS - 1;
- host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL;
- host->max_lun = MEGASAS_MAX_LUN;
- host->max_cmd_len = 16;
-
- /*
- * Notify the mid-layer about the new controller
- */
- if (scsi_add_host(host, &instance->pdev->dev)) {
- printk(KERN_DEBUG "megasas: scsi_add_host failed\n");
- return -ENODEV;
- }
-
- /*
- * Trigger SCSI to scan our drives
- */
- scsi_scan_host(host);
- return 0;
-}
-
-static int
-megasas_set_dma_mask(struct pci_dev *pdev)
-{
- /*
- * All our contollers are capable of performing 64-bit DMA
- */
- if (IS_DMA64) {
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
-
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
- goto fail_set_dma_mask;
- }
- } else {
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
- goto fail_set_dma_mask;
- }
- return 0;
-
-fail_set_dma_mask:
- return 1;
-}
-
-/**
- * megasas_probe_one - PCI hotplug entry point
- * @pdev: PCI device structure
- * @id: PCI ids of supported hotplugged adapter
- */
-static int __devinit
-megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- int rval;
- struct Scsi_Host *host;
- struct megasas_instance *instance;
-
- /*
- * Announce PCI information
- */
- printk(KERN_INFO "megasas: %#4.04x:%#4.04x:%#4.04x:%#4.04x: ",
- pdev->vendor, pdev->device, pdev->subsystem_vendor,
- pdev->subsystem_device);
-
- printk("bus %d:slot %d:func %d\n",
- pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
-
- /*
- * PCI prepping: enable device set bus mastering and dma mask
- */
- rval = pci_enable_device(pdev);
-
- if (rval) {
- return rval;
- }
-
- pci_set_master(pdev);
-
- if (megasas_set_dma_mask(pdev))
- goto fail_set_dma_mask;
-
- host = scsi_host_alloc(&megasas_template,
- sizeof(struct megasas_instance));
-
- if (!host) {
- printk(KERN_DEBUG "megasas: scsi_host_alloc failed\n");
- goto fail_alloc_instance;
- }
-
- instance = (struct megasas_instance *)host->hostdata;
- memset(instance, 0, sizeof(*instance));
- atomic_set( &instance->fw_reset_no_pci_access, 0 );
-
- instance->producer = pci_alloc_consistent(pdev, sizeof(u32),
- &instance->producer_h);
- instance->consumer = pci_alloc_consistent(pdev, sizeof(u32),
- &instance->consumer_h);
-
- if (!instance->producer || !instance->consumer) {
- printk(KERN_DEBUG "megasas: Failed to allocate memory for "
- "producer, consumer\n");
- goto fail_alloc_dma_buf;
- }
-
- *instance->producer = 0;
- *instance->consumer = 0;
- megasas_poll_wait_aen = 0;
- instance->flag_ieee = 0;
- instance->ev = NULL;
- instance->issuepend_done = 1;
- instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
- megasas_poll_wait_aen = 0;
-
- instance->evt_detail = pci_alloc_consistent(pdev,
- sizeof(struct
- megasas_evt_detail),
- &instance->evt_detail_h);
-
- if (!instance->evt_detail) {
- printk(KERN_DEBUG "megasas: Failed to allocate memory for "
- "event detail structure\n");
- goto fail_alloc_dma_buf;
- }
-
- /*
- * Initialize locks and queues
- */
- INIT_LIST_HEAD(&instance->cmd_pool);
- INIT_LIST_HEAD(&instance->internal_reset_pending_q);
-
- atomic_set(&instance->fw_outstanding,0);
-
- init_waitqueue_head(&instance->int_cmd_wait_q);
- init_waitqueue_head(&instance->abort_cmd_wait_q);
-
- spin_lock_init(&instance->cmd_pool_lock);
- spin_lock_init(&instance->hba_lock);
- spin_lock_init(&instance->completion_lock);
- spin_lock_init(&poll_aen_lock);
-
- mutex_init(&instance->aen_mutex);
-
- /*
- * Initialize PCI related and misc parameters
- */
- instance->pdev = pdev;
- instance->host = host;
- instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
- instance->init_id = MEGASAS_DEFAULT_INIT_ID;
-
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- instance->flag_ieee = 1;
- sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
- } else
- sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);
-
- megasas_dbg_lvl = 0;
- instance->flag = 0;
- instance->unload = 1;
- instance->last_time = 0;
- instance->disableOnlineCtrlReset = 1;
-
- INIT_WORK(&instance->work_init, process_fw_state_change_wq);
-
- /*
- * Initialize MFI Firmware
- */
- if (megasas_init_mfi(instance))
- goto fail_init_mfi;
-
- /*
- * Register IRQ
- */
- if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED, "megasas", instance)) {
- printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
- goto fail_irq;
- }
-
- instance->instancet->enable_intr(instance->reg_set);
-
- /*
- * Store instance in PCI softstate
- */
- pci_set_drvdata(pdev, instance);
-
- /*
- * Add this controller to megasas_mgmt_info structure so that it
- * can be exported to management applications
- */
- megasas_mgmt_info.count++;
- megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = instance;
- megasas_mgmt_info.max_index++;
-
- /*
- * Initiate AEN (Asynchronous Event Notification)
- */
- if (megasas_start_aen(instance)) {
- printk(KERN_DEBUG "megasas: start aen failed\n");
- goto fail_start_aen;
- }
-
- /*
- * Register with SCSI mid-layer
- */
- if (megasas_io_attach(instance))
- goto fail_io_attach;
-
- instance->unload = 0;
- return 0;
-
- fail_start_aen:
- fail_io_attach:
- megasas_mgmt_info.count--;
- megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL;
- megasas_mgmt_info.max_index--;
-
- pci_set_drvdata(pdev, NULL);
- instance->instancet->disable_intr(instance->reg_set);
- free_irq(instance->pdev->irq, instance);
-
- megasas_release_mfi(instance);
-
- fail_irq:
- fail_init_mfi:
- fail_alloc_dma_buf:
- if (instance->evt_detail)
- pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
- instance->evt_detail,
- instance->evt_detail_h);
-
- if (instance->producer)
- pci_free_consistent(pdev, sizeof(u32), instance->producer,
- instance->producer_h);
- if (instance->consumer)
- pci_free_consistent(pdev, sizeof(u32), instance->consumer,
- instance->consumer_h);
- scsi_host_put(host);
-
- fail_alloc_instance:
- fail_set_dma_mask:
- pci_disable_device(pdev);
-
- return -ENODEV;
-}
-
-/**
- * megasas_flush_cache - Requests FW to flush all its caches
- * @instance: Adapter soft state
- */
-static void megasas_flush_cache(struct megasas_instance *instance)
-{
- struct megasas_cmd *cmd;
- struct megasas_dcmd_frame *dcmd;
-
- if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR)
- return;
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd)
- return;
-
- dcmd = &cmd->frame->dcmd;
-
- memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
-
- dcmd->cmd = MFI_CMD_DCMD;
- dcmd->cmd_status = 0x0;
- dcmd->sge_count = 0;
- dcmd->flags = MFI_FRAME_DIR_NONE;
- dcmd->timeout = 0;
- dcmd->data_xfer_len = 0;
- dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH;
- dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE;
-
- megasas_issue_blocked_cmd(instance, cmd);
-
- megasas_return_cmd(instance, cmd);
-
- return;
-}
-
-/**
- * megasas_shutdown_controller - Instructs FW to shutdown the controller
- * @instance: Adapter soft state
- * @opcode: Shutdown/Hibernate
- */
-static void megasas_shutdown_controller(struct megasas_instance *instance,
- u32 opcode)
-{
- struct megasas_cmd *cmd;
- struct megasas_dcmd_frame *dcmd;
-
- if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR)
- return;
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd)
- return;
-
- if (instance->aen_cmd)
- megasas_issue_blocked_abort_cmd(instance, instance->aen_cmd);
-
- dcmd = &cmd->frame->dcmd;
-
- memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
-
- dcmd->cmd = MFI_CMD_DCMD;
- dcmd->cmd_status = 0x0;
- dcmd->sge_count = 0;
- dcmd->flags = MFI_FRAME_DIR_NONE;
- dcmd->timeout = 0;
- dcmd->data_xfer_len = 0;
- dcmd->opcode = opcode;
-
- megasas_issue_blocked_cmd(instance, cmd);
-
- megasas_return_cmd(instance, cmd);
-
- return;
-}
-
-#ifdef CONFIG_PM
-/**
- * megasas_suspend - driver suspend entry point
- * @pdev: PCI device structure
- * @state: PCI power state to suspend routine
- */
-static int
-megasas_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct Scsi_Host *host;
- struct megasas_instance *instance;
-
- instance = pci_get_drvdata(pdev);
- host = instance->host;
- instance->unload = 1;
-
- if (poll_mode_io)
- del_timer_sync(&instance->io_completion_timer);
-
- megasas_flush_cache(instance);
- megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN);
-
- /* cancel the delayed work if this work still in queue */
- if (instance->ev != NULL) {
- struct megasas_aen_event *ev = instance->ev;
- cancel_delayed_work(
- (struct delayed_work *)&ev->hotplug_work);
- flush_scheduled_work();
- instance->ev = NULL;
- }
-
- tasklet_kill(&instance->isr_tasklet);
-
- pci_set_drvdata(instance->pdev, instance);
- instance->instancet->disable_intr(instance->reg_set);
- free_irq(instance->pdev->irq, instance);
-
- pci_save_state(pdev);
- pci_disable_device(pdev);
-
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
- return 0;
-}
-
-/**
- * megasas_resume- driver resume entry point
- * @pdev: PCI device structure
- */
-static int
-megasas_resume(struct pci_dev *pdev)
-{
- int rval;
- struct Scsi_Host *host;
- struct megasas_instance *instance;
-
- instance = pci_get_drvdata(pdev);
- host = instance->host;
- pci_set_power_state(pdev, PCI_D0);
- pci_enable_wake(pdev, PCI_D0, 0);
- pci_restore_state(pdev);
-
- /*
- * PCI prepping: enable device set bus mastering and dma mask
- */
- rval = pci_enable_device(pdev);
-
- if (rval) {
- printk(KERN_ERR "megasas: Enable device failed\n");
- return rval;
- }
-
- pci_set_master(pdev);
-
- if (megasas_set_dma_mask(pdev))
- goto fail_set_dma_mask;
-
- /*
- * Initialize MFI Firmware
- */
-
- *instance->producer = 0;
- *instance->consumer = 0;
-
- atomic_set(&instance->fw_outstanding, 0);
-
- /*
- * We expect the FW state to be READY
- */
- if (megasas_transition_to_ready(instance))
- goto fail_ready_state;
-
- if (megasas_issue_init_mfi(instance))
- goto fail_init_mfi;
-
- tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
- (unsigned long)instance);
-
- /*
- * Register IRQ
- */
- if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED,
- "megasas", instance)) {
- printk(KERN_ERR "megasas: Failed to register IRQ\n");
- goto fail_irq;
- }
-
- instance->instancet->enable_intr(instance->reg_set);
-
- /*
- * Initiate AEN (Asynchronous Event Notification)
- */
- if (megasas_start_aen(instance))
- printk(KERN_ERR "megasas: Start AEN failed\n");
-
- /* Initialize the cmd completion timer */
- if (poll_mode_io)
- megasas_start_timer(instance, &instance->io_completion_timer,
- megasas_io_completion_timer,
- MEGASAS_COMPLETION_TIMER_INTERVAL);
- instance->unload = 0;
-
- return 0;
-
-fail_irq:
-fail_init_mfi:
- if (instance->evt_detail)
- pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
- instance->evt_detail,
- instance->evt_detail_h);
-
- if (instance->producer)
- pci_free_consistent(pdev, sizeof(u32), instance->producer,
- instance->producer_h);
- if (instance->consumer)
- pci_free_consistent(pdev, sizeof(u32), instance->consumer,
- instance->consumer_h);
- scsi_host_put(host);
-
-fail_set_dma_mask:
-fail_ready_state:
-
- pci_disable_device(pdev);
-
- return -ENODEV;
-}
-#else
-#define megasas_suspend NULL
-#define megasas_resume NULL
-#endif
-
-/**
- * megasas_detach_one - PCI hot"un"plug entry point
- * @pdev: PCI device structure
- */
-static void __devexit megasas_detach_one(struct pci_dev *pdev)
-{
- int i;
- struct Scsi_Host *host;
- struct megasas_instance *instance;
-
- instance = pci_get_drvdata(pdev);
- instance->unload = 1;
- host = instance->host;
-
- if (poll_mode_io)
- del_timer_sync(&instance->io_completion_timer);
-
- scsi_remove_host(instance->host);
- megasas_flush_cache(instance);
- megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
-
- /* cancel the delayed work if this work still in queue*/
- if (instance->ev != NULL) {
- struct megasas_aen_event *ev = instance->ev;
- cancel_delayed_work(
- (struct delayed_work *)&ev->hotplug_work);
- flush_scheduled_work();
- instance->ev = NULL;
- }
-
- tasklet_kill(&instance->isr_tasklet);
-
- /*
- * Take the instance off the instance array. Note that we will not
- * decrement the max_index. We let this array be sparse array
- */
- for (i = 0; i < megasas_mgmt_info.max_index; i++) {
- if (megasas_mgmt_info.instance[i] == instance) {
- megasas_mgmt_info.count--;
- megasas_mgmt_info.instance[i] = NULL;
-
- break;
- }
- }
-
- pci_set_drvdata(instance->pdev, NULL);
-
- instance->instancet->disable_intr(instance->reg_set);
-
- free_irq(instance->pdev->irq, instance);
-
- megasas_release_mfi(instance);
-
- pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
- instance->evt_detail, instance->evt_detail_h);
-
- pci_free_consistent(pdev, sizeof(u32), instance->producer,
- instance->producer_h);
-
- pci_free_consistent(pdev, sizeof(u32), instance->consumer,
- instance->consumer_h);
-
- scsi_host_put(host);
-
- pci_set_drvdata(pdev, NULL);
-
- pci_disable_device(pdev);
-
- return;
-}
-
-/**
- * megasas_shutdown - Shutdown entry point
- * @device: Generic device structure
- */
-static void megasas_shutdown(struct pci_dev *pdev)
-{
- struct megasas_instance *instance = pci_get_drvdata(pdev);
- instance->unload = 1;
- megasas_flush_cache(instance);
- megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
-}
-
-/**
- * megasas_mgmt_open - char node "open" entry point
- */
-static int megasas_mgmt_open(struct inode *inode, struct file *filep)
-{
- cycle_kernel_lock();
- /*
- * Allow only those users with admin rights
- */
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
-
- return 0;
-}
-
-/**
- * megasas_mgmt_fasync - Async notifier registration from applications
- *
- * This function adds the calling process to a driver global queue. When an
- * event occurs, SIGIO will be sent to all processes in this queue.
- */
-static int megasas_mgmt_fasync(int fd, struct file *filep, int mode)
-{
- int rc;
-
- mutex_lock(&megasas_async_queue_mutex);
-
- rc = fasync_helper(fd, filep, mode, &megasas_async_queue);
-
- mutex_unlock(&megasas_async_queue_mutex);
-
- if (rc >= 0) {
- /* For sanity check when we get ioctl */
- filep->private_data = filep;
- return 0;
- }
-
- printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc);
-
- return rc;
-}
-
-/**
- * megasas_mgmt_poll - char node "poll" entry point
- * */
-static unsigned int megasas_mgmt_poll(struct file *file, poll_table *wait)
-{
- unsigned int mask;
- unsigned long flags;
- poll_wait(file, &megasas_poll_wait, wait);
- spin_lock_irqsave(&poll_aen_lock, flags);
- if (megasas_poll_wait_aen)
- mask = (POLLIN | POLLRDNORM);
- else
- mask = 0;
- spin_unlock_irqrestore(&poll_aen_lock, flags);
- return mask;
-}
-
-/**
- * megasas_mgmt_fw_ioctl - Issues management ioctls to FW
- * @instance: Adapter soft state
- * @argp: User's ioctl packet
- */
-static int
-megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
- struct megasas_iocpacket __user * user_ioc,
- struct megasas_iocpacket *ioc)
-{
- struct megasas_sge32 *kern_sge32;
- struct megasas_cmd *cmd;
- void *kbuff_arr[MAX_IOCTL_SGE];
- dma_addr_t buf_handle = 0;
- int error = 0, i;
- void *sense = NULL;
- dma_addr_t sense_handle;
- unsigned long *sense_ptr;
-
- memset(kbuff_arr, 0, sizeof(kbuff_arr));
-
- if (ioc->sge_count > MAX_IOCTL_SGE) {
- printk(KERN_DEBUG "megasas: SGE count [%d] > max limit [%d]\n",
- ioc->sge_count, MAX_IOCTL_SGE);
- return -EINVAL;
- }
-
- cmd = megasas_get_cmd(instance);
- if (!cmd) {
- printk(KERN_DEBUG "megasas: Failed to get a cmd packet\n");
- return -ENOMEM;
- }
-
- /*
- * User's IOCTL packet has 2 frames (maximum). Copy those two
- * frames into our cmd's frames. cmd->frame's context will get
- * overwritten when we copy from user's frames. So set that value
- * alone separately
- */
- memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE);
- cmd->frame->hdr.context = cmd->index;
- cmd->frame->hdr.pad_0 = 0;
-
- /*
- * The management interface between applications and the fw uses
- * MFI frames. E.g, RAID configuration changes, LD property changes
- * etc are accomplishes through different kinds of MFI frames. The
- * driver needs to care only about substituting user buffers with
- * kernel buffers in SGLs. The location of SGL is embedded in the
- * struct iocpacket itself.
- */
- kern_sge32 = (struct megasas_sge32 *)
- ((unsigned long)cmd->frame + ioc->sgl_off);
-
- /*
- * For each user buffer, create a mirror buffer and copy in
- */
- for (i = 0; i < ioc->sge_count; i++) {
- if (!ioc->sgl[i].iov_len)
- continue;
-
- kbuff_arr[i] = dma_alloc_coherent(&instance->pdev->dev,
- ioc->sgl[i].iov_len,
- &buf_handle, GFP_KERNEL);
- if (!kbuff_arr[i]) {
- printk(KERN_DEBUG "megasas: Failed to alloc "
- "kernel SGL buffer for IOCTL \n");
- error = -ENOMEM;
- goto out;
- }
-
- /*
- * We don't change the dma_coherent_mask, so
- * pci_alloc_consistent only returns 32bit addresses
- */
- kern_sge32[i].phys_addr = (u32) buf_handle;
- kern_sge32[i].length = ioc->sgl[i].iov_len;
-
- /*
- * We created a kernel buffer corresponding to the
- * user buffer. Now copy in from the user buffer
- */
- if (copy_from_user(kbuff_arr[i], ioc->sgl[i].iov_base,
- (u32) (ioc->sgl[i].iov_len))) {
- error = -EFAULT;
- goto out;
- }
- }
-
- if (ioc->sense_len) {
- sense = dma_alloc_coherent(&instance->pdev->dev, ioc->sense_len,
- &sense_handle, GFP_KERNEL);
- if (!sense) {
- error = -ENOMEM;
- goto out;
- }
-
- sense_ptr =
- (unsigned long *) ((unsigned long)cmd->frame + ioc->sense_off);
- *sense_ptr = sense_handle;
- }
-
- /*
- * Set the sync_cmd flag so that the ISR knows not to complete this
- * cmd to the SCSI mid-layer
- */
- cmd->sync_cmd = 1;
- megasas_issue_blocked_cmd(instance, cmd);
- cmd->sync_cmd = 0;
-
- /*
- * copy out the kernel buffers to user buffers
- */
- for (i = 0; i < ioc->sge_count; i++) {
- if (copy_to_user(ioc->sgl[i].iov_base, kbuff_arr[i],
- ioc->sgl[i].iov_len)) {
- error = -EFAULT;
- goto out;
- }
- }
-
- /*
- * copy out the sense
- */
- if (ioc->sense_len) {
- /*
- * sense_ptr points to the location that has the user
- * sense buffer address
- */
- sense_ptr = (unsigned long *) ((unsigned long)ioc->frame.raw +
- ioc->sense_off);
-
- if (copy_to_user((void __user *)((unsigned long)(*sense_ptr)),
- sense, ioc->sense_len)) {
- printk(KERN_ERR "megasas: Failed to copy out to user "
- "sense data\n");
- error = -EFAULT;
- goto out;
- }
- }
-
- /*
- * copy the status codes returned by the fw
- */
- if (copy_to_user(&user_ioc->frame.hdr.cmd_status,
- &cmd->frame->hdr.cmd_status, sizeof(u8))) {
- printk(KERN_DEBUG "megasas: Error copying out cmd_status\n");
- error = -EFAULT;
- }
-
- out:
- if (sense) {
- dma_free_coherent(&instance->pdev->dev, ioc->sense_len,
- sense, sense_handle);
- }
-
- for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
- dma_free_coherent(&instance->pdev->dev,
- kern_sge32[i].length,
- kbuff_arr[i], kern_sge32[i].phys_addr);
- }
-
- megasas_return_cmd(instance, cmd);
- return error;
-}
-
-static struct megasas_instance *megasas_lookup_instance(u16 host_no)
-{
- int i;
-
- for (i = 0; i < megasas_mgmt_info.max_index; i++) {
-
- if ((megasas_mgmt_info.instance[i]) &&
- (megasas_mgmt_info.instance[i]->host->host_no == host_no))
- return megasas_mgmt_info.instance[i];
- }
-
- return NULL;
-}
-
-static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
-{
- struct megasas_iocpacket __user *user_ioc =
- (struct megasas_iocpacket __user *)arg;
- struct megasas_iocpacket *ioc;
- struct megasas_instance *instance;
- int error;
- int i;
- unsigned long flags;
- u32 wait_time = MEGASAS_RESET_WAIT_TIME;
-
- ioc = kmalloc(sizeof(*ioc), GFP_KERNEL);
- if (!ioc)
- return -ENOMEM;
-
- if (copy_from_user(ioc, user_ioc, sizeof(*ioc))) {
- error = -EFAULT;
- goto out_kfree_ioc;
- }
-
- instance = megasas_lookup_instance(ioc->host_no);
- if (!instance) {
- error = -ENODEV;
- goto out_kfree_ioc;
- }
-
- if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
- printk(KERN_ERR "Controller in crit error\n");
- error = -ENODEV;
- goto out_kfree_ioc;
- }
-
- if (instance->unload == 1) {
- error = -ENODEV;
- goto out_kfree_ioc;
- }
-
- /*
- * We will allow only MEGASAS_INT_CMDS number of parallel ioctl cmds
- */
- if (down_interruptible(&instance->ioctl_sem)) {
- error = -ERESTARTSYS;
- goto out_kfree_ioc;
- }
-
- for (i = 0; i < wait_time; i++) {
-
- spin_lock_irqsave(&instance->hba_lock, flags);
- if (instance->adprecovery == MEGASAS_HBA_OPERATIONAL) {
- spin_unlock_irqrestore(&instance->hba_lock, flags);
- break;
- }
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
- printk(KERN_NOTICE "megasas: waiting"
- "for controller reset to finish\n");
- }
-
- msleep(1000);
- }
-
- spin_lock_irqsave(&instance->hba_lock, flags);
- if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) {
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- printk(KERN_ERR "megaraid_sas: timed out while"
- "waiting for HBA to recover\n");
- error = -ENODEV;
- goto out_kfree_ioc;
- }
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- error = megasas_mgmt_fw_ioctl(instance, user_ioc, ioc);
- up(&instance->ioctl_sem);
-
- out_kfree_ioc:
- kfree(ioc);
- return error;
-}
-
-static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg)
-{
- struct megasas_instance *instance;
- struct megasas_aen aen;
- int error;
- int i;
- unsigned long flags;
- u32 wait_time = MEGASAS_RESET_WAIT_TIME;
-
- if (file->private_data != file) {
- printk(KERN_DEBUG "megasas: fasync_helper was not "
- "called first\n");
- return -EINVAL;
- }
-
- if (copy_from_user(&aen, (void __user *)arg, sizeof(aen)))
- return -EFAULT;
-
- instance = megasas_lookup_instance(aen.host_no);
-
- if (!instance)
- return -ENODEV;
-
- if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
- return -ENODEV;
- }
-
- if (instance->unload == 1) {
- return -ENODEV;
- }
-
- for (i = 0; i < wait_time; i++) {
-
- spin_lock_irqsave(&instance->hba_lock, flags);
- if (instance->adprecovery == MEGASAS_HBA_OPERATIONAL) {
- spin_unlock_irqrestore(&instance->hba_lock,
- flags);
- break;
- }
-
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
- printk(KERN_NOTICE "megasas: waiting for"
- "controller reset to finish\n");
- }
-
- msleep(1000);
- }
-
- spin_lock_irqsave(&instance->hba_lock, flags);
- if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) {
- spin_unlock_irqrestore(&instance->hba_lock, flags);
- printk(KERN_ERR "megaraid_sas: timed out while waiting"
- "for HBA to recover.\n");
- return -ENODEV;
- }
- spin_unlock_irqrestore(&instance->hba_lock, flags);
-
- mutex_lock(&instance->aen_mutex);
- error = megasas_register_aen(instance, aen.seq_num,
- aen.class_locale_word);
- mutex_unlock(&instance->aen_mutex);
- return error;
-}
-
-/**
- * megasas_mgmt_ioctl - char node ioctl entry point
- */
-static long
-megasas_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- switch (cmd) {
- case MEGASAS_IOC_FIRMWARE:
- return megasas_mgmt_ioctl_fw(file, arg);
-
- case MEGASAS_IOC_GET_AEN:
- return megasas_mgmt_ioctl_aen(file, arg);
- }
-
- return -ENOTTY;
-}
-
-#ifdef CONFIG_COMPAT
-static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg)
-{
- struct compat_megasas_iocpacket __user *cioc =
- (struct compat_megasas_iocpacket __user *)arg;
- struct megasas_iocpacket __user *ioc =
- compat_alloc_user_space(sizeof(struct megasas_iocpacket));
- int i;
- int error = 0;
- compat_uptr_t ptr;
-
- if (clear_user(ioc, sizeof(*ioc)))
- return -EFAULT;
-
- if (copy_in_user(&ioc->host_no, &cioc->host_no, sizeof(u16)) ||
- copy_in_user(&ioc->sgl_off, &cioc->sgl_off, sizeof(u32)) ||
- copy_in_user(&ioc->sense_off, &cioc->sense_off, sizeof(u32)) ||
- copy_in_user(&ioc->sense_len, &cioc->sense_len, sizeof(u32)) ||
- copy_in_user(ioc->frame.raw, cioc->frame.raw, 128) ||
- copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32)))
- return -EFAULT;
-
- /*
- * The sense_ptr is used in megasas_mgmt_fw_ioctl only when
- * sense_len is not null, so prepare the 64bit value under
- * the same condition.
- */
- if (ioc->sense_len) {
- void __user **sense_ioc_ptr =
- (void __user **)(ioc->frame.raw + ioc->sense_off);
- compat_uptr_t *sense_cioc_ptr =
- (compat_uptr_t *)(cioc->frame.raw + cioc->sense_off);
- if (get_user(ptr, sense_cioc_ptr) ||
- put_user(compat_ptr(ptr), sense_ioc_ptr))
- return -EFAULT;
- }
-
- for (i = 0; i < MAX_IOCTL_SGE; i++) {
- if (get_user(ptr, &cioc->sgl[i].iov_base) ||
- put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) ||
- copy_in_user(&ioc->sgl[i].iov_len,
- &cioc->sgl[i].iov_len, sizeof(compat_size_t)))
- return -EFAULT;
- }
-
- error = megasas_mgmt_ioctl_fw(file, (unsigned long)ioc);
-
- if (copy_in_user(&cioc->frame.hdr.cmd_status,
- &ioc->frame.hdr.cmd_status, sizeof(u8))) {
- printk(KERN_DEBUG "megasas: error copy_in_user cmd_status\n");
- return -EFAULT;
- }
- return error;
-}
-
-static long
-megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- switch (cmd) {
- case MEGASAS_IOC_FIRMWARE32:
- return megasas_mgmt_compat_ioctl_fw(file, arg);
- case MEGASAS_IOC_GET_AEN:
- return megasas_mgmt_ioctl_aen(file, arg);
- }
-
- return -ENOTTY;
-}
-#endif
-
-/*
- * File operations structure for management interface
- */
-static const struct file_operations megasas_mgmt_fops = {
- .owner = THIS_MODULE,
- .open = megasas_mgmt_open,
- .fasync = megasas_mgmt_fasync,
- .unlocked_ioctl = megasas_mgmt_ioctl,
- .poll = megasas_mgmt_poll,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = megasas_mgmt_compat_ioctl,
-#endif
-};
-
-/*
- * PCI hotplug support registration structure
- */
-static struct pci_driver megasas_pci_driver = {
-
- .name = "megaraid_sas",
- .id_table = megasas_pci_table,
- .probe = megasas_probe_one,
- .remove = __devexit_p(megasas_detach_one),
- .suspend = megasas_suspend,
- .resume = megasas_resume,
- .shutdown = megasas_shutdown,
-};
-
-/*
- * Sysfs driver attributes
- */
-static ssize_t megasas_sysfs_show_version(struct device_driver *dd, char *buf)
-{
- return snprintf(buf, strlen(MEGASAS_VERSION) + 2, "%s\n",
- MEGASAS_VERSION);
-}
-
-static DRIVER_ATTR(version, S_IRUGO, megasas_sysfs_show_version, NULL);
-
-static ssize_t
-megasas_sysfs_show_release_date(struct device_driver *dd, char *buf)
-{
- return snprintf(buf, strlen(MEGASAS_RELDATE) + 2, "%s\n",
- MEGASAS_RELDATE);
-}
-
-static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date,
- NULL);
-
-static ssize_t
-megasas_sysfs_show_support_poll_for_event(struct device_driver *dd, char *buf)
-{
- return sprintf(buf, "%u\n", support_poll_for_event);
-}
-
-static DRIVER_ATTR(support_poll_for_event, S_IRUGO,
- megasas_sysfs_show_support_poll_for_event, NULL);
-
-static ssize_t
-megasas_sysfs_show_dbg_lvl(struct device_driver *dd, char *buf)
-{
- return sprintf(buf, "%u\n", megasas_dbg_lvl);
-}
-
-static ssize_t
-megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t count)
-{
- int retval = count;
- if(sscanf(buf,"%u",&megasas_dbg_lvl)<1){
- printk(KERN_ERR "megasas: could not set dbg_lvl\n");
- retval = -EINVAL;
- }
- return retval;
-}
-
-static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
- megasas_sysfs_set_dbg_lvl);
-
-static ssize_t
-megasas_sysfs_show_poll_mode_io(struct device_driver *dd, char *buf)
-{
- return sprintf(buf, "%u\n", poll_mode_io);
-}
-
-static ssize_t
-megasas_sysfs_set_poll_mode_io(struct device_driver *dd,
- const char *buf, size_t count)
-{
- int retval = count;
- int tmp = poll_mode_io;
- int i;
- struct megasas_instance *instance;
-
- if (sscanf(buf, "%u", &poll_mode_io) < 1) {
- printk(KERN_ERR "megasas: could not set poll_mode_io\n");
- retval = -EINVAL;
- }
-
- /*
- * Check if poll_mode_io is already set or is same as previous value
- */
- if ((tmp && poll_mode_io) || (tmp == poll_mode_io))
- goto out;
-
- if (poll_mode_io) {
- /*
- * Start timers for all adapters
- */
- for (i = 0; i < megasas_mgmt_info.max_index; i++) {
- instance = megasas_mgmt_info.instance[i];
- if (instance) {
- megasas_start_timer(instance,
- &instance->io_completion_timer,
- megasas_io_completion_timer,
- MEGASAS_COMPLETION_TIMER_INTERVAL);
- }
- }
- } else {
- /*
- * Delete timers for all adapters
- */
- for (i = 0; i < megasas_mgmt_info.max_index; i++) {
- instance = megasas_mgmt_info.instance[i];
- if (instance)
- del_timer_sync(&instance->io_completion_timer);
- }
- }
-
-out:
- return retval;
-}
-
-static void
-megasas_aen_polling(struct work_struct *work)
-{
- struct megasas_aen_event *ev =
- container_of(work, struct megasas_aen_event, hotplug_work);
- struct megasas_instance *instance = ev->instance;
- union megasas_evt_class_locale class_locale;
- struct Scsi_Host *host;
- struct scsi_device *sdev1;
- u16 pd_index = 0;
- u16 ld_index = 0;
- int i, j, doscan = 0;
- u32 seq_num;
- int error;
-
- if (!instance) {
- printk(KERN_ERR "invalid instance!\n");
- kfree(ev);
- return;
- }
- instance->ev = NULL;
- host = instance->host;
- if (instance->evt_detail) {
-
- switch (instance->evt_detail->code) {
- case MR_EVT_PD_INSERTED:
- if (megasas_get_pd_list(instance) == 0) {
- for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
- for (j = 0;
- j < MEGASAS_MAX_DEV_PER_CHANNEL;
- j++) {
-
- pd_index =
- (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
-
- sdev1 =
- scsi_device_lookup(host, i, j, 0);
-
- if (instance->pd_list[pd_index].driveState
- == MR_PD_STATE_SYSTEM) {
- if (!sdev1) {
- scsi_add_device(host, i, j, 0);
- }
-
- if (sdev1)
- scsi_device_put(sdev1);
- }
- }
- }
- }
- doscan = 0;
- break;
-
- case MR_EVT_PD_REMOVED:
- if (megasas_get_pd_list(instance) == 0) {
- megasas_get_pd_list(instance);
- for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
- for (j = 0;
- j < MEGASAS_MAX_DEV_PER_CHANNEL;
- j++) {
-
- pd_index =
- (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
-
- sdev1 =
- scsi_device_lookup(host, i, j, 0);
-
- if (instance->pd_list[pd_index].driveState
- == MR_PD_STATE_SYSTEM) {
- if (sdev1) {
- scsi_device_put(sdev1);
- }
- } else {
- if (sdev1) {
- scsi_remove_device(sdev1);
- scsi_device_put(sdev1);
- }
- }
- }
- }
- }
- doscan = 0;
- break;
-
- case MR_EVT_LD_OFFLINE:
- case MR_EVT_LD_DELETED:
- megasas_get_ld_list(instance);
- for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
- for (j = 0;
- j < MEGASAS_MAX_DEV_PER_CHANNEL;
- j++) {
-
- ld_index =
- (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
-
- sdev1 = scsi_device_lookup(host,
- i + MEGASAS_MAX_LD_CHANNELS,
- j,
- 0);
-
- if (instance->ld_ids[ld_index] != 0xff) {
- if (sdev1) {
- scsi_device_put(sdev1);
- }
- } else {
- if (sdev1) {
- scsi_remove_device(sdev1);
- scsi_device_put(sdev1);
- }
- }
- }
- }
- doscan = 0;
- break;
- case MR_EVT_LD_CREATED:
- megasas_get_ld_list(instance);
- for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
- for (j = 0;
- j < MEGASAS_MAX_DEV_PER_CHANNEL;
- j++) {
- ld_index =
- (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
-
- sdev1 = scsi_device_lookup(host,
- i+MEGASAS_MAX_LD_CHANNELS,
- j, 0);
-
- if (instance->ld_ids[ld_index] !=
- 0xff) {
- if (!sdev1) {
- scsi_add_device(host,
- i + 2,
- j, 0);
- }
- }
- if (sdev1) {
- scsi_device_put(sdev1);
- }
- }
- }
- doscan = 0;
- break;
- case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
- case MR_EVT_FOREIGN_CFG_IMPORTED:
- doscan = 1;
- break;
- default:
- doscan = 0;
- break;
- }
- } else {
- printk(KERN_ERR "invalid evt_detail!\n");
- kfree(ev);
- return;
- }
-
- if (doscan) {
- printk(KERN_INFO "scanning ...\n");
- megasas_get_pd_list(instance);
- for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
- for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
- pd_index = i*MEGASAS_MAX_DEV_PER_CHANNEL + j;
- sdev1 = scsi_device_lookup(host, i, j, 0);
- if (instance->pd_list[pd_index].driveState ==
- MR_PD_STATE_SYSTEM) {
- if (!sdev1) {
- scsi_add_device(host, i, j, 0);
- }
- if (sdev1)
- scsi_device_put(sdev1);
- } else {
- if (sdev1) {
- scsi_remove_device(sdev1);
- scsi_device_put(sdev1);
- }
- }
- }
- }
-
- megasas_get_ld_list(instance);
- for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
- for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
- ld_index =
- (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
-
- sdev1 = scsi_device_lookup(host,
- i+MEGASAS_MAX_LD_CHANNELS, j, 0);
- if (instance->ld_ids[ld_index] != 0xff) {
- if (!sdev1) {
- scsi_add_device(host,
- i+2,
- j, 0);
- } else {
- scsi_device_put(sdev1);
- }
- } else {
- if (sdev1) {
- scsi_remove_device(sdev1);
- scsi_device_put(sdev1);
- }
- }
- }
- }
- }
-
- if ( instance->aen_cmd != NULL ) {
- kfree(ev);
- return ;
- }
-
- seq_num = instance->evt_detail->seq_num + 1;
-
- /* Register AEN with FW for latest sequence number plus 1 */
- class_locale.members.reserved = 0;
- class_locale.members.locale = MR_EVT_LOCALE_ALL;
- class_locale.members.class = MR_EVT_CLASS_DEBUG;
- mutex_lock(&instance->aen_mutex);
- error = megasas_register_aen(instance, seq_num,
- class_locale.word);
- mutex_unlock(&instance->aen_mutex);
-
- if (error)
- printk(KERN_ERR "register aen failed error %x\n", error);
-
- kfree(ev);
-}
-
-
-static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUSR,
- megasas_sysfs_show_poll_mode_io,
- megasas_sysfs_set_poll_mode_io);
-
-/**
- * megasas_init - Driver load entry point
- */
-static int __init megasas_init(void)
-{
- int rval;
-
- /*
- * Announce driver version and other information
- */
- printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
- MEGASAS_EXT_VERSION);
-
- support_poll_for_event = 2;
-
- memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info));
-
- /*
- * Register character device node
- */
- rval = register_chrdev(0, "megaraid_sas_ioctl", &megasas_mgmt_fops);
-
- if (rval < 0) {
- printk(KERN_DEBUG "megasas: failed to open device node\n");
- return rval;
- }
-
- megasas_mgmt_majorno = rval;
-
- /*
- * Register ourselves as PCI hotplug module
- */
- rval = pci_register_driver(&megasas_pci_driver);
-
- if (rval) {
- printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n");
- goto err_pcidrv;
- }
-
- rval = driver_create_file(&megasas_pci_driver.driver,
- &driver_attr_version);
- if (rval)
- goto err_dcf_attr_ver;
- rval = driver_create_file(&megasas_pci_driver.driver,
- &driver_attr_release_date);
- if (rval)
- goto err_dcf_rel_date;
-
- rval = driver_create_file(&megasas_pci_driver.driver,
- &driver_attr_support_poll_for_event);
- if (rval)
- goto err_dcf_support_poll_for_event;
-
- rval = driver_create_file(&megasas_pci_driver.driver,
- &driver_attr_dbg_lvl);
- if (rval)
- goto err_dcf_dbg_lvl;
- rval = driver_create_file(&megasas_pci_driver.driver,
- &driver_attr_poll_mode_io);
- if (rval)
- goto err_dcf_poll_mode_io;
-
- return rval;
-
-err_dcf_poll_mode_io:
- driver_remove_file(&megasas_pci_driver.driver,
- &driver_attr_dbg_lvl);
-err_dcf_dbg_lvl:
- driver_remove_file(&megasas_pci_driver.driver,
- &driver_attr_support_poll_for_event);
-
-err_dcf_support_poll_for_event:
- driver_remove_file(&megasas_pci_driver.driver,
- &driver_attr_release_date);
-
-err_dcf_rel_date:
- driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
-err_dcf_attr_ver:
- pci_unregister_driver(&megasas_pci_driver);
-err_pcidrv:
- unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
- return rval;
-}
-
-/**
- * megasas_exit - Driver unload entry point
- */
-static void __exit megasas_exit(void)
-{
- driver_remove_file(&megasas_pci_driver.driver,
- &driver_attr_poll_mode_io);
- driver_remove_file(&megasas_pci_driver.driver,
- &driver_attr_dbg_lvl);
- driver_remove_file(&megasas_pci_driver.driver,
- &driver_attr_release_date);
- driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
-
- pci_unregister_driver(&megasas_pci_driver);
- unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
-}
-
-module_init(megasas_init);
-module_exit(megasas_exit);
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
new file mode 100644
index 000000000000..a18ae3cba87e
--- /dev/null
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -0,0 +1,5005 @@
+/*
+ *
+ * Linux MegaRAID driver for SAS based RAID controllers
+ *
+ * Copyright (c) 2003-2005 LSI Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * FILE : megaraid_sas.c
+ * Version : v00.00.04.01-rc1
+ *
+ * Authors:
+ * (email-id : megaraidlinux@lsi.com)
+ * Sreenivas Bagalkote
+ * Sumant Patro
+ * Bo Yang
+ *
+ * List of supported controllers
+ *
+ * OEM Product Name VID DID SSVID SSID
+ * --- ------------ --- --- ---- ----
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <linux/uio.h>
+#include <asm/uaccess.h>
+#include <linux/fs.h>
+#include <linux/compat.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include "megaraid_sas.h"
+
+/*
+ * poll_mode_io:1- schedule complete completion from q cmd
+ */
+static unsigned int poll_mode_io;
+module_param_named(poll_mode_io, poll_mode_io, int, 0);
+MODULE_PARM_DESC(poll_mode_io,
+ "Complete cmds from IO path, (default=0)");
+
+MODULE_LICENSE("GPL");
+MODULE_VERSION(MEGASAS_VERSION);
+MODULE_AUTHOR("megaraidlinux@lsi.com");
+MODULE_DESCRIPTION("LSI MegaRAID SAS Driver");
+
+static int megasas_transition_to_ready(struct megasas_instance *instance);
+static int megasas_get_pd_list(struct megasas_instance *instance);
+static int megasas_issue_init_mfi(struct megasas_instance *instance);
+static int megasas_register_aen(struct megasas_instance *instance,
+ u32 seq_num, u32 class_locale_word);
+/*
+ * PCI ID table for all supported controllers
+ */
+static struct pci_device_id megasas_pci_table[] = {
+
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1064R)},
+ /* xscale IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078R)},
+ /* ppc IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
+ /* ppc IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
+ /* gen2*/
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
+ /* gen2*/
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0073SKINNY)},
+ /* skinny*/
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0071SKINNY)},
+ /* skinny*/
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
+ /* xscale IOP, vega */
+ {PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
+ /* xscale IOP */
+ {}
+};
+
+MODULE_DEVICE_TABLE(pci, megasas_pci_table);
+
+static int megasas_mgmt_majorno;
+static struct megasas_mgmt_info megasas_mgmt_info;
+static struct fasync_struct *megasas_async_queue;
+static DEFINE_MUTEX(megasas_async_queue_mutex);
+
+static int megasas_poll_wait_aen;
+static DECLARE_WAIT_QUEUE_HEAD(megasas_poll_wait);
+static u32 support_poll_for_event;
+static u32 megasas_dbg_lvl;
+
+/* define lock for aen poll */
+spinlock_t poll_aen_lock;
+
+static void
+megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
+ u8 alt_status);
+
+/**
+ * megasas_get_cmd - Get a command from the free pool
+ * @instance: Adapter soft state
+ *
+ * Returns a free command from the pool
+ */
+static struct megasas_cmd *megasas_get_cmd(struct megasas_instance
+ *instance)
+{
+ unsigned long flags;
+ struct megasas_cmd *cmd = NULL;
+
+ spin_lock_irqsave(&instance->cmd_pool_lock, flags);
+
+ if (!list_empty(&instance->cmd_pool)) {
+ cmd = list_entry((&instance->cmd_pool)->next,
+ struct megasas_cmd, list);
+ list_del_init(&cmd->list);
+ } else {
+ printk(KERN_ERR "megasas: Command pool empty!\n");
+ }
+
+ spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
+ return cmd;
+}
+
+/**
+ * megasas_return_cmd - Return a cmd to free command pool
+ * @instance: Adapter soft state
+ * @cmd: Command packet to be returned to free command pool
+ */
+static inline void
+megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&instance->cmd_pool_lock, flags);
+
+ cmd->scmd = NULL;
+ list_add_tail(&cmd->list, &instance->cmd_pool);
+
+ spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
+}
+
+
+/**
+* The following functions are defined for xscale
+* (deviceid : 1064R, PERC5) controllers
+*/
+
+/**
+ * megasas_enable_intr_xscale - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_xscale(struct megasas_register_set __iomem * regs)
+{
+ writel(0, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_xscale -Disables interrupt
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr_xscale(struct megasas_register_set __iomem * regs)
+{
+ u32 mask = 0x1f;
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_xscale - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs)
+{
+ return readl(&(regs)->outbound_msg_0);
+}
+/**
+ * megasas_clear_interrupt_xscale - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
+{
+ u32 status;
+ u32 mfiStatus = 0;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (status & MFI_OB_INTR_STATUS_MASK)
+ mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
+ if (status & MFI_XSCALE_OMR0_CHANGE_INTERRUPT)
+ mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ if (mfiStatus)
+ writel(status, ®s->outbound_intr_status);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_status);
+
+ return mfiStatus;
+}
+
+/**
+ * megasas_fire_cmd_xscale - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_xscale(struct megasas_instance *instance,
+ dma_addr_t frame_phys_addr,
+ u32 frame_count,
+ struct megasas_register_set __iomem *regs)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ writel((frame_phys_addr >> 3)|(frame_count),
+ &(regs)->inbound_queue_port);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+}
+
+/**
+ * megasas_adp_reset_xscale - For controller reset
+ * @regs: MFI register set
+ */
+static int
+megasas_adp_reset_xscale(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ u32 i;
+ u32 pcidata;
+ writel(MFI_ADP_RESET, ®s->inbound_doorbell);
+
+ for (i = 0; i < 3; i++)
+ msleep(1000); /* sleep for 3 secs */
+ pcidata = 0;
+ pci_read_config_dword(instance->pdev, MFI_1068_PCSR_OFFSET, &pcidata);
+ printk(KERN_NOTICE "pcidata = %x\n", pcidata);
+ if (pcidata & 0x2) {
+ printk(KERN_NOTICE "mfi 1068 offset read=%x\n", pcidata);
+ pcidata &= ~0x2;
+ pci_write_config_dword(instance->pdev,
+ MFI_1068_PCSR_OFFSET, pcidata);
+
+ for (i = 0; i < 2; i++)
+ msleep(1000); /* need to wait 2 secs again */
+
+ pcidata = 0;
+ pci_read_config_dword(instance->pdev,
+ MFI_1068_FW_HANDSHAKE_OFFSET, &pcidata);
+ printk(KERN_NOTICE "1068 offset handshake read=%x\n", pcidata);
+ if ((pcidata & 0xffff0000) == MFI_1068_FW_READY) {
+ printk(KERN_NOTICE "1068 offset pcidt=%x\n", pcidata);
+ pcidata = 0;
+ pci_write_config_dword(instance->pdev,
+ MFI_1068_FW_HANDSHAKE_OFFSET, pcidata);
+ }
+ }
+ return 0;
+}
+
+/**
+ * megasas_check_reset_xscale - For controller reset check
+ * @regs: MFI register set
+ */
+static int
+megasas_check_reset_xscale(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ u32 consumer;
+ consumer = *instance->consumer;
+
+ if ((instance->adprecovery != MEGASAS_HBA_OPERATIONAL) &&
+ (*instance->consumer == MEGASAS_ADPRESET_INPROG_SIGN)) {
+ return 1;
+ }
+ return 0;
+}
+
+static struct megasas_instance_template megasas_instance_template_xscale = {
+
+ .fire_cmd = megasas_fire_cmd_xscale,
+ .enable_intr = megasas_enable_intr_xscale,
+ .disable_intr = megasas_disable_intr_xscale,
+ .clear_intr = megasas_clear_intr_xscale,
+ .read_fw_status_reg = megasas_read_fw_status_reg_xscale,
+ .adp_reset = megasas_adp_reset_xscale,
+ .check_reset = megasas_check_reset_xscale,
+};
+
+/**
+* This is the end of set of functions & definitions specific
+* to xscale (deviceid : 1064R, PERC5) controllers
+*/
+
+/**
+* The following functions are defined for ppc (deviceid : 0x60)
+* controllers
+*/
+
+/**
+ * megasas_enable_intr_ppc - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+ writel(~0x80000000, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_ppc - Disable interrupt
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ u32 mask = 0xFFFFFFFF;
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_ppc - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_ppc - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) {
+ return 0;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, ®s->outbound_doorbell_clear);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_doorbell_clear);
+
+ return 1;
+}
+/**
+ * megasas_fire_cmd_ppc - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_ppc(struct megasas_instance *instance,
+ dma_addr_t frame_phys_addr,
+ u32 frame_count,
+ struct megasas_register_set __iomem *regs)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ writel((frame_phys_addr | (frame_count<<1))|1,
+ &(regs)->inbound_queue_port);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+}
+
+/**
+ * megasas_adp_reset_ppc - For controller reset
+ * @regs: MFI register set
+ */
+static int
+megasas_adp_reset_ppc(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
+
+/**
+ * megasas_check_reset_ppc - For controller reset check
+ * @regs: MFI register set
+ */
+static int
+megasas_check_reset_ppc(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
+static struct megasas_instance_template megasas_instance_template_ppc = {
+
+ .fire_cmd = megasas_fire_cmd_ppc,
+ .enable_intr = megasas_enable_intr_ppc,
+ .disable_intr = megasas_disable_intr_ppc,
+ .clear_intr = megasas_clear_intr_ppc,
+ .read_fw_status_reg = megasas_read_fw_status_reg_ppc,
+ .adp_reset = megasas_adp_reset_ppc,
+ .check_reset = megasas_check_reset_ppc,
+};
+
+/**
+ * megasas_enable_intr_skinny - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_skinny(struct megasas_register_set __iomem *regs)
+{
+ writel(0xFFFFFFFF, &(regs)->outbound_intr_mask);
+
+ writel(~MFI_SKINNY_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_skinny - Disables interrupt
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr_skinny(struct megasas_register_set __iomem *regs)
+{
+ u32 mask = 0xFFFFFFFF;
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_skinny - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_skinny(struct megasas_register_set __iomem *regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_skinny - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (!(status & MFI_SKINNY_ENABLE_INTERRUPT_MASK)) {
+ return 0;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, ®s->outbound_intr_status);
+
+ /*
+ * dummy read to flush PCI
+ */
+ readl(®s->outbound_intr_status);
+
+ return 1;
+}
+
+/**
+ * megasas_fire_cmd_skinny - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_skinny(struct megasas_instance *instance,
+ dma_addr_t frame_phys_addr,
+ u32 frame_count,
+ struct megasas_register_set __iomem *regs)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ writel(0, &(regs)->inbound_high_queue_port);
+ writel((frame_phys_addr | (frame_count<<1))|1,
+ &(regs)->inbound_low_queue_port);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+}
+
+/**
+ * megasas_adp_reset_skinny - For controller reset
+ * @regs: MFI register set
+ */
+static int
+megasas_adp_reset_skinny(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
+
+/**
+ * megasas_check_reset_skinny - For controller reset check
+ * @regs: MFI register set
+ */
+static int
+megasas_check_reset_skinny(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
+
+static struct megasas_instance_template megasas_instance_template_skinny = {
+
+ .fire_cmd = megasas_fire_cmd_skinny,
+ .enable_intr = megasas_enable_intr_skinny,
+ .disable_intr = megasas_disable_intr_skinny,
+ .clear_intr = megasas_clear_intr_skinny,
+ .read_fw_status_reg = megasas_read_fw_status_reg_skinny,
+ .adp_reset = megasas_adp_reset_skinny,
+ .check_reset = megasas_check_reset_skinny,
+};
+
+
+/**
+* The following functions are defined for gen2 (deviceid : 0x78 0x79)
+* controllers
+*/
+
+/**
+ * megasas_enable_intr_gen2 - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+ writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+ /* write ~0x00000005 (4 & 1) to the intr mask*/
+ writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_gen2 - Disables interrupt
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+ u32 mask = 0xFFFFFFFF;
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_gen2 - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_gen2 - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+ u32 status;
+ u32 mfiStatus = 0;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (status & MFI_GEN2_ENABLE_INTERRUPT_MASK) {
+ mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
+ }
+ if (status & MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT) {
+ mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ if (mfiStatus)
+ writel(status, ®s->outbound_doorbell_clear);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_status);
+
+ return mfiStatus;
+}
+/**
+ * megasas_fire_cmd_gen2 - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_gen2(struct megasas_instance *instance,
+ dma_addr_t frame_phys_addr,
+ u32 frame_count,
+ struct megasas_register_set __iomem *regs)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ writel((frame_phys_addr | (frame_count<<1))|1,
+ &(regs)->inbound_queue_port);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+}
+
+/**
+ * megasas_adp_reset_gen2 - For controller reset
+ * @regs: MFI register set
+ */
+static int
+megasas_adp_reset_gen2(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *reg_set)
+{
+ u32 retry = 0 ;
+ u32 HostDiag;
+
+ writel(0, ®_set->seq_offset);
+ writel(4, ®_set->seq_offset);
+ writel(0xb, ®_set->seq_offset);
+ writel(2, ®_set->seq_offset);
+ writel(7, ®_set->seq_offset);
+ writel(0xd, ®_set->seq_offset);
+ msleep(1000);
+
+ HostDiag = (u32)readl(®_set->host_diag);
+
+ while ( !( HostDiag & DIAG_WRITE_ENABLE) ) {
+ msleep(100);
+ HostDiag = (u32)readl(®_set->host_diag);
+ printk(KERN_NOTICE "RESETGEN2: retry=%x, hostdiag=%x\n",
+ retry, HostDiag);
+
+ if (retry++ >= 100)
+ return 1;
+
+ }
+
+ printk(KERN_NOTICE "ADP_RESET_GEN2: HostDiag=%x\n", HostDiag);
+
+ writel((HostDiag | DIAG_RESET_ADAPTER), ®_set->host_diag);
+
+ ssleep(10);
+
+ HostDiag = (u32)readl(®_set->host_diag);
+ while ( ( HostDiag & DIAG_RESET_ADAPTER) ) {
+ msleep(100);
+ HostDiag = (u32)readl(®_set->host_diag);
+ printk(KERN_NOTICE "RESET_GEN2: retry=%x, hostdiag=%x\n",
+ retry, HostDiag);
+
+ if (retry++ >= 1000)
+ return 1;
+
+ }
+ return 0;
+}
+
+/**
+ * megasas_check_reset_gen2 - For controller reset check
+ * @regs: MFI register set
+ */
+static int
+megasas_check_reset_gen2(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
+
+static struct megasas_instance_template megasas_instance_template_gen2 = {
+
+ .fire_cmd = megasas_fire_cmd_gen2,
+ .enable_intr = megasas_enable_intr_gen2,
+ .disable_intr = megasas_disable_intr_gen2,
+ .clear_intr = megasas_clear_intr_gen2,
+ .read_fw_status_reg = megasas_read_fw_status_reg_gen2,
+ .adp_reset = megasas_adp_reset_gen2,
+ .check_reset = megasas_check_reset_gen2,
+};
+
+/**
+* This is the end of set of functions & definitions
+* specific to gen2 (deviceid : 0x78, 0x79) controllers
+*/
+
+/**
+ * megasas_issue_polled - Issues a polling command
+ * @instance: Adapter soft state
+ * @cmd: Command packet to be issued
+ *
+ * For polling, MFI requires the cmd_status to be set to 0xFF before posting.
+ */
+static int
+megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd)
+{
+ int i;
+ u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000;
+
+ struct megasas_header *frame_hdr = &cmd->frame->hdr;
+
+ frame_hdr->cmd_status = 0xFF;
+ frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
+
+ /*
+ * Issue the frame using inbound queue port
+ */
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr, 0, instance->reg_set);
+
+ /*
+ * Wait for cmd_status to change
+ */
+ for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i++) {
+ rmb();
+ msleep(1);
+ }
+
+ if (frame_hdr->cmd_status == 0xff)
+ return -ETIME;
+
+ return 0;
+}
+
+/**
+ * megasas_issue_blocked_cmd - Synchronous wrapper around regular FW cmds
+ * @instance: Adapter soft state
+ * @cmd: Command to be issued
+ *
+ * This function waits on an event for the command to be returned from ISR.
+ * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
+ * Used to issue ioctl commands.
+ */
+static int
+megasas_issue_blocked_cmd(struct megasas_instance *instance,
+ struct megasas_cmd *cmd)
+{
+ cmd->cmd_status = ENODATA;
+
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr, 0, instance->reg_set);
+
+ wait_event(instance->int_cmd_wait_q, cmd->cmd_status != ENODATA);
+
+ return 0;
+}
+
+/**
+ * megasas_issue_blocked_abort_cmd - Aborts previously issued cmd
+ * @instance: Adapter soft state
+ * @cmd_to_abort: Previously issued cmd to be aborted
+ *
+ * MFI firmware can abort previously issued AEN comamnd (automatic event
+ * notification). The megasas_issue_blocked_abort_cmd() issues such abort
+ * cmd and waits for return status.
+ * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs
+ */
+static int
+megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
+ struct megasas_cmd *cmd_to_abort)
+{
+ struct megasas_cmd *cmd;
+ struct megasas_abort_frame *abort_fr;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd)
+ return -1;
+
+ abort_fr = &cmd->frame->abort;
+
+ /*
+ * Prepare and issue the abort frame
+ */
+ abort_fr->cmd = MFI_CMD_ABORT;
+ abort_fr->cmd_status = 0xFF;
+ abort_fr->flags = 0;
+ abort_fr->abort_context = cmd_to_abort->index;
+ abort_fr->abort_mfi_phys_addr_lo = cmd_to_abort->frame_phys_addr;
+ abort_fr->abort_mfi_phys_addr_hi = 0;
+
+ cmd->sync_cmd = 1;
+ cmd->cmd_status = 0xFF;
+
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr, 0, instance->reg_set);
+
+ /*
+ * Wait for this cmd to complete
+ */
+ wait_event(instance->abort_cmd_wait_q, cmd->cmd_status != 0xFF);
+ cmd->sync_cmd = 0;
+
+ megasas_return_cmd(instance, cmd);
+ return 0;
+}
+
+/**
+ * megasas_make_sgl32 - Prepares 32-bit SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @mfi_sgl: SGL to be filled in
+ *
+ * If successful, this function returns the number of SG elements. Otherwise,
+ * it returnes -1.
+ */
+static int
+megasas_make_sgl32(struct megasas_instance *instance, struct scsi_cmnd *scp,
+ union megasas_sgl *mfi_sgl)
+{
+ int i;
+ int sge_count;
+ struct scatterlist *os_sgl;
+
+ sge_count = scsi_dma_map(scp);
+ BUG_ON(sge_count < 0);
+
+ if (sge_count) {
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ mfi_sgl->sge32[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge32[i].phys_addr = sg_dma_address(os_sgl);
+ }
+ }
+ return sge_count;
+}
+
+/**
+ * megasas_make_sgl64 - Prepares 64-bit SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @mfi_sgl: SGL to be filled in
+ *
+ * If successful, this function returns the number of SG elements. Otherwise,
+ * it returnes -1.
+ */
+static int
+megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd *scp,
+ union megasas_sgl *mfi_sgl)
+{
+ int i;
+ int sge_count;
+ struct scatterlist *os_sgl;
+
+ sge_count = scsi_dma_map(scp);
+ BUG_ON(sge_count < 0);
+
+ if (sge_count) {
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ mfi_sgl->sge64[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge64[i].phys_addr = sg_dma_address(os_sgl);
+ }
+ }
+ return sge_count;
+}
+
+/**
+ * megasas_make_sgl_skinny - Prepares IEEE SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @mfi_sgl: SGL to be filled in
+ *
+ * If successful, this function returns the number of SG elements. Otherwise,
+ * it returnes -1.
+ */
+static int
+megasas_make_sgl_skinny(struct megasas_instance *instance,
+ struct scsi_cmnd *scp, union megasas_sgl *mfi_sgl)
+{
+ int i;
+ int sge_count;
+ struct scatterlist *os_sgl;
+
+ sge_count = scsi_dma_map(scp);
+
+ if (sge_count) {
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ mfi_sgl->sge_skinny[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge_skinny[i].phys_addr =
+ sg_dma_address(os_sgl);
+ }
+ }
+ return sge_count;
+}
+
+ /**
+ * megasas_get_frame_count - Computes the number of frames
+ * @frame_type : type of frame- io or pthru frame
+ * @sge_count : number of sg elements
+ *
+ * Returns the number of frames required for numnber of sge's (sge_count)
+ */
+
+static u32 megasas_get_frame_count(struct megasas_instance *instance,
+ u8 sge_count, u8 frame_type)
+{
+ int num_cnt;
+ int sge_bytes;
+ u32 sge_sz;
+ u32 frame_count=0;
+
+ sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
+ sizeof(struct megasas_sge32);
+
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
+ /*
+ * Main frame can contain 2 SGEs for 64-bit SGLs and
+ * 3 SGEs for 32-bit SGLs for ldio &
+ * 1 SGEs for 64-bit SGLs and
+ * 2 SGEs for 32-bit SGLs for pthru frame
+ */
+ if (unlikely(frame_type == PTHRU_FRAME)) {
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
+ num_cnt = sge_count - 1;
+ else
+ num_cnt = sge_count - 2;
+ } else {
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
+ num_cnt = sge_count - 2;
+ else
+ num_cnt = sge_count - 3;
+ }
+
+ if(num_cnt>0){
+ sge_bytes = sge_sz * num_cnt;
+
+ frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
+ ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) ;
+ }
+ /* Main frame */
+ frame_count +=1;
+
+ if (frame_count > 7)
+ frame_count = 8;
+ return frame_count;
+}
+
+/**
+ * megasas_build_dcdb - Prepares a direct cdb (DCDB) command
+ * @instance: Adapter soft state
+ * @scp: SCSI command
+ * @cmd: Command to be prepared in
+ *
+ * This function prepares CDB commands. These are typcially pass-through
+ * commands to the devices.
+ */
+static int
+megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
+ struct megasas_cmd *cmd)
+{
+ u32 is_logical;
+ u32 device_id;
+ u16 flags = 0;
+ struct megasas_pthru_frame *pthru;
+
+ is_logical = MEGASAS_IS_LOGICAL(scp);
+ device_id = MEGASAS_DEV_INDEX(instance, scp);
+ pthru = (struct megasas_pthru_frame *)cmd->frame;
+
+ if (scp->sc_data_direction == PCI_DMA_TODEVICE)
+ flags = MFI_FRAME_DIR_WRITE;
+ else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+ flags = MFI_FRAME_DIR_READ;
+ else if (scp->sc_data_direction == PCI_DMA_NONE)
+ flags = MFI_FRAME_DIR_NONE;
+
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
+ /*
+ * Prepare the DCDB frame
+ */
+ pthru->cmd = (is_logical) ? MFI_CMD_LD_SCSI_IO : MFI_CMD_PD_SCSI_IO;
+ pthru->cmd_status = 0x0;
+ pthru->scsi_status = 0x0;
+ pthru->target_id = device_id;
+ pthru->lun = scp->device->lun;
+ pthru->cdb_len = scp->cmd_len;
+ pthru->timeout = 0;
+ pthru->flags = flags;
+ pthru->data_xfer_len = scsi_bufflen(scp);
+
+ memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
+
+ /*
+ * Construct SGL
+ */
+ if (instance->flag_ieee == 1) {
+ pthru->flags |= MFI_FRAME_SGL64;
+ pthru->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &pthru->sgl);
+ } else if (IS_DMA64) {
+ pthru->flags |= MFI_FRAME_SGL64;
+ pthru->sge_count = megasas_make_sgl64(instance, scp,
+ &pthru->sgl);
+ } else
+ pthru->sge_count = megasas_make_sgl32(instance, scp,
+ &pthru->sgl);
+
+ if (pthru->sge_count > instance->max_num_sge) {
+ printk(KERN_ERR "megasas: DCDB two many SGE NUM=%x\n",
+ pthru->sge_count);
+ return 0;
+ }
+
+ /*
+ * Sense info specific
+ */
+ pthru->sense_len = SCSI_SENSE_BUFFERSIZE;
+ pthru->sense_buf_phys_addr_hi = 0;
+ pthru->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
+
+ /*
+ * Compute the total number of frames this command consumes. FW uses
+ * this number to pull sufficient number of frames from host memory.
+ */
+ cmd->frame_count = megasas_get_frame_count(instance, pthru->sge_count,
+ PTHRU_FRAME);
+
+ return cmd->frame_count;
+}
+
+/**
+ * megasas_build_ldio - Prepares IOs to logical devices
+ * @instance: Adapter soft state
+ * @scp: SCSI command
+ * @cmd: Command to be prepared
+ *
+ * Frames (and accompanying SGLs) for regular SCSI IOs use this function.
+ */
+static int
+megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
+ struct megasas_cmd *cmd)
+{
+ u32 device_id;
+ u8 sc = scp->cmnd[0];
+ u16 flags = 0;
+ struct megasas_io_frame *ldio;
+
+ device_id = MEGASAS_DEV_INDEX(instance, scp);
+ ldio = (struct megasas_io_frame *)cmd->frame;
+
+ if (scp->sc_data_direction == PCI_DMA_TODEVICE)
+ flags = MFI_FRAME_DIR_WRITE;
+ else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+ flags = MFI_FRAME_DIR_READ;
+
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
+ /*
+ * Prepare the Logical IO frame: 2nd bit is zero for all read cmds
+ */
+ ldio->cmd = (sc & 0x02) ? MFI_CMD_LD_WRITE : MFI_CMD_LD_READ;
+ ldio->cmd_status = 0x0;
+ ldio->scsi_status = 0x0;
+ ldio->target_id = device_id;
+ ldio->timeout = 0;
+ ldio->reserved_0 = 0;
+ ldio->pad_0 = 0;
+ ldio->flags = flags;
+ ldio->start_lba_hi = 0;
+ ldio->access_byte = (scp->cmd_len != 6) ? scp->cmnd[1] : 0;
+
+ /*
+ * 6-byte READ(0x08) or WRITE(0x0A) cdb
+ */
+ if (scp->cmd_len == 6) {
+ ldio->lba_count = (u32) scp->cmnd[4];
+ ldio->start_lba_lo = ((u32) scp->cmnd[1] << 16) |
+ ((u32) scp->cmnd[2] << 8) | (u32) scp->cmnd[3];
+
+ ldio->start_lba_lo &= 0x1FFFFF;
+ }
+
+ /*
+ * 10-byte READ(0x28) or WRITE(0x2A) cdb
+ */
+ else if (scp->cmd_len == 10) {
+ ldio->lba_count = (u32) scp->cmnd[8] |
+ ((u32) scp->cmnd[7] << 8);
+ ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) |
+ ((u32) scp->cmnd[3] << 16) |
+ ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+ }
+
+ /*
+ * 12-byte READ(0xA8) or WRITE(0xAA) cdb
+ */
+ else if (scp->cmd_len == 12) {
+ ldio->lba_count = ((u32) scp->cmnd[6] << 24) |
+ ((u32) scp->cmnd[7] << 16) |
+ ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
+
+ ldio->start_lba_lo = ((u32) scp->cmnd[2] << 24) |
+ ((u32) scp->cmnd[3] << 16) |
+ ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+ }
+
+ /*
+ * 16-byte READ(0x88) or WRITE(0x8A) cdb
+ */
+ else if (scp->cmd_len == 16) {
+ ldio->lba_count = ((u32) scp->cmnd[10] << 24) |
+ ((u32) scp->cmnd[11] << 16) |
+ ((u32) scp->cmnd[12] << 8) | (u32) scp->cmnd[13];
+
+ ldio->start_lba_lo = ((u32) scp->cmnd[6] << 24) |
+ ((u32) scp->cmnd[7] << 16) |
+ ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
+
+ ldio->start_lba_hi = ((u32) scp->cmnd[2] << 24) |
+ ((u32) scp->cmnd[3] << 16) |
+ ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+
+ }
+
+ /*
+ * Construct SGL
+ */
+ if (instance->flag_ieee) {
+ ldio->flags |= MFI_FRAME_SGL64;
+ ldio->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &ldio->sgl);
+ } else if (IS_DMA64) {
+ ldio->flags |= MFI_FRAME_SGL64;
+ ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
+ } else
+ ldio->sge_count = megasas_make_sgl32(instance, scp, &ldio->sgl);
+
+ if (ldio->sge_count > instance->max_num_sge) {
+ printk(KERN_ERR "megasas: build_ld_io: sge_count = %x\n",
+ ldio->sge_count);
+ return 0;
+ }
+
+ /*
+ * Sense info specific
+ */
+ ldio->sense_len = SCSI_SENSE_BUFFERSIZE;
+ ldio->sense_buf_phys_addr_hi = 0;
+ ldio->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
+
+ /*
+ * Compute the total number of frames this command consumes. FW uses
+ * this number to pull sufficient number of frames from host memory.
+ */
+ cmd->frame_count = megasas_get_frame_count(instance,
+ ldio->sge_count, IO_FRAME);
+
+ return cmd->frame_count;
+}
+
+/**
+ * megasas_is_ldio - Checks if the cmd is for logical drive
+ * @scmd: SCSI command
+ *
+ * Called by megasas_queue_command to find out if the command to be queued
+ * is a logical drive command
+ */
+static inline int megasas_is_ldio(struct scsi_cmnd *cmd)
+{
+ if (!MEGASAS_IS_LOGICAL(cmd))
+ return 0;
+ switch (cmd->cmnd[0]) {
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_6:
+ case WRITE_6:
+ case READ_16:
+ case WRITE_16:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+ /**
+ * megasas_dump_pending_frames - Dumps the frame address of all pending cmds
+ * in FW
+ * @instance: Adapter soft state
+ */
+static inline void
+megasas_dump_pending_frames(struct megasas_instance *instance)
+{
+ struct megasas_cmd *cmd;
+ int i,n;
+ union megasas_sgl *mfi_sgl;
+ struct megasas_io_frame *ldio;
+ struct megasas_pthru_frame *pthru;
+ u32 sgcount;
+ u32 max_cmd = instance->max_fw_cmds;
+
+ printk(KERN_ERR "\nmegasas[%d]: Dumping Frame Phys Address of all pending cmds in FW\n",instance->host->host_no);
+ printk(KERN_ERR "megasas[%d]: Total OS Pending cmds : %d\n",instance->host->host_no,atomic_read(&instance->fw_outstanding));
+ if (IS_DMA64)
+ printk(KERN_ERR "\nmegasas[%d]: 64 bit SGLs were sent to FW\n",instance->host->host_no);
+ else
+ printk(KERN_ERR "\nmegasas[%d]: 32 bit SGLs were sent to FW\n",instance->host->host_no);
+
+ printk(KERN_ERR "megasas[%d]: Pending OS cmds in FW : \n",instance->host->host_no);
+ for (i = 0; i < max_cmd; i++) {
+ cmd = instance->cmd_list[i];
+ if(!cmd->scmd)
+ continue;
+ printk(KERN_ERR "megasas[%d]: Frame addr :0x%08lx : ",instance->host->host_no,(unsigned long)cmd->frame_phys_addr);
+ if (megasas_is_ldio(cmd->scmd)){
+ ldio = (struct megasas_io_frame *)cmd->frame;
+ mfi_sgl = &ldio->sgl;
+ sgcount = ldio->sge_count;
+ printk(KERN_ERR "megasas[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, lba lo : 0x%x, lba_hi : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",instance->host->host_no, cmd->frame_count,ldio->cmd,ldio->target_id, ldio->start_lba_lo,ldio->start_lba_hi,ldio->sense_buf_phys_addr_lo,sgcount);
+ }
+ else {
+ pthru = (struct megasas_pthru_frame *) cmd->frame;
+ mfi_sgl = &pthru->sgl;
+ sgcount = pthru->sge_count;
+ printk(KERN_ERR "megasas[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, lun : 0x%x, cdb_len : 0x%x, data xfer len : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",instance->host->host_no,cmd->frame_count,pthru->cmd,pthru->target_id,pthru->lun,pthru->cdb_len , pthru->data_xfer_len,pthru->sense_buf_phys_addr_lo,sgcount);
+ }
+ if(megasas_dbg_lvl & MEGASAS_DBG_LVL){
+ for (n = 0; n < sgcount; n++){
+ if (IS_DMA64)
+ printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%08lx ",mfi_sgl->sge64[n].length , (unsigned long)mfi_sgl->sge64[n].phys_addr) ;
+ else
+ printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%x ",mfi_sgl->sge32[n].length , mfi_sgl->sge32[n].phys_addr) ;
+ }
+ }
+ printk(KERN_ERR "\n");
+ } /*for max_cmd*/
+ printk(KERN_ERR "\nmegasas[%d]: Pending Internal cmds in FW : \n",instance->host->host_no);
+ for (i = 0; i < max_cmd; i++) {
+
+ cmd = instance->cmd_list[i];
+
+ if(cmd->sync_cmd == 1){
+ printk(KERN_ERR "0x%08lx : ", (unsigned long)cmd->frame_phys_addr);
+ }
+ }
+ printk(KERN_ERR "megasas[%d]: Dumping Done.\n\n",instance->host->host_no);
+}
+
+/**
+ * megasas_queue_command - Queue entry point
+ * @scmd: SCSI command to be queued
+ * @done: Callback entry point
+ */
+static int
+megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
+{
+ u32 frame_count;
+ struct megasas_cmd *cmd;
+ struct megasas_instance *instance;
+ unsigned long flags;
+
+ instance = (struct megasas_instance *)
+ scmd->device->host->hostdata;
+
+ if (instance->issuepend_done == 0)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ scmd->scsi_done = done;
+ scmd->result = 0;
+
+ if (MEGASAS_IS_LOGICAL(scmd) &&
+ (scmd->device->id >= MEGASAS_MAX_LD || scmd->device->lun)) {
+ scmd->result = DID_BAD_TARGET << 16;
+ goto out_done;
+ }
+
+ switch (scmd->cmnd[0]) {
+ case SYNCHRONIZE_CACHE:
+ /*
+ * FW takes care of flush cache on its own
+ * No need to send it down
+ */
+ scmd->result = DID_OK << 16;
+ goto out_done;
+ default:
+ break;
+ }
+
+ cmd = megasas_get_cmd(instance);
+ if (!cmd)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /*
+ * Logical drive command
+ */
+ if (megasas_is_ldio(scmd))
+ frame_count = megasas_build_ldio(instance, scmd, cmd);
+ else
+ frame_count = megasas_build_dcdb(instance, scmd, cmd);
+
+ if (!frame_count)
+ goto out_return_cmd;
+
+ cmd->scmd = scmd;
+ scmd->SCp.ptr = (char *)cmd;
+
+ /*
+ * Issue the command to the FW
+ */
+ atomic_inc(&instance->fw_outstanding);
+
+ instance->instancet->fire_cmd(instance, cmd->frame_phys_addr,
+ cmd->frame_count-1, instance->reg_set);
+ /*
+ * Check if we have pend cmds to be completed
+ */
+ if (poll_mode_io && atomic_read(&instance->fw_outstanding))
+ tasklet_schedule(&instance->isr_tasklet);
+
+
+ return 0;
+
+ out_return_cmd:
+ megasas_return_cmd(instance, cmd);
+ out_done:
+ done(scmd);
+ return 0;
+}
+
+static int megasas_slave_configure(struct scsi_device *sdev)
+{
+ /*
+ * Don't export physical disk devices to the disk driver.
+ *
+ * FIXME: Currently we don't export them to the midlayer at all.
+ * That will be fixed once LSI engineers have audited the
+ * firmware for possible issues.
+ */
+ if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK)
+ return -ENXIO;
+
+ /*
+ * The RAID firmware may require extended timeouts.
+ */
+ if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS)
+ blk_queue_rq_timeout(sdev->request_queue,
+ MEGASAS_DEFAULT_CMD_TIMEOUT * HZ);
+ return 0;
+}
+
+static void megaraid_sas_kill_hba(struct megasas_instance *instance)
+{
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->reserved_0[0]);
+ } else {
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->inbound_doorbell);
+ }
+}
+
+/**
+ * megasas_complete_cmd_dpc - Returns FW's controller structure
+ * @instance_addr: Address of adapter soft state
+ *
+ * Tasklet to complete cmds
+ */
+static void megasas_complete_cmd_dpc(unsigned long instance_addr)
+{
+ u32 producer;
+ u32 consumer;
+ u32 context;
+ struct megasas_cmd *cmd;
+ struct megasas_instance *instance =
+ (struct megasas_instance *)instance_addr;
+ unsigned long flags;
+
+ /* If we have already declared adapter dead, donot complete cmds */
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR )
+ return;
+
+ spin_lock_irqsave(&instance->completion_lock, flags);
+
+ producer = *instance->producer;
+ consumer = *instance->consumer;
+
+ while (consumer != producer) {
+ context = instance->reply_queue[consumer];
+ if (context >= instance->max_fw_cmds) {
+ printk(KERN_ERR "Unexpected context value %x\n",
+ context);
+ BUG();
+ }
+
+ cmd = instance->cmd_list[context];
+
+ megasas_complete_cmd(instance, cmd, DID_OK);
+
+ consumer++;
+ if (consumer == (instance->max_fw_cmds + 1)) {
+ consumer = 0;
+ }
+ }
+
+ *instance->consumer = producer;
+
+ spin_unlock_irqrestore(&instance->completion_lock, flags);
+
+ /*
+ * Check if we can restore can_queue
+ */
+ if (instance->flag & MEGASAS_FW_BUSY
+ && time_after(jiffies, instance->last_time + 5 * HZ)
+ && atomic_read(&instance->fw_outstanding) < 17) {
+
+ spin_lock_irqsave(instance->host->host_lock, flags);
+ instance->flag &= ~MEGASAS_FW_BUSY;
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ instance->host->can_queue =
+ instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
+ } else
+ instance->host->can_queue =
+ instance->max_fw_cmds - MEGASAS_INT_CMDS;
+
+ spin_unlock_irqrestore(instance->host->host_lock, flags);
+ }
+}
+
+/**
+ * megasas_wait_for_outstanding - Wait for all outstanding cmds
+ * @instance: Adapter soft state
+ *
+ * This function waits for upto MEGASAS_RESET_WAIT_TIME seconds for FW to
+ * complete all its outstanding commands. Returns error if one or more IOs
+ * are pending after this time period. It also marks the controller dead.
+ */
+static int megasas_wait_for_outstanding(struct megasas_instance *instance)
+{
+ int i;
+ u32 reset_index;
+ u32 wait_time = MEGASAS_RESET_WAIT_TIME;
+ u8 adprecovery;
+ unsigned long flags;
+ struct list_head clist_local;
+ struct megasas_cmd *reset_cmd;
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ adprecovery = instance->adprecovery;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ if (adprecovery != MEGASAS_HBA_OPERATIONAL) {
+
+ INIT_LIST_HEAD(&clist_local);
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ list_splice_init(&instance->internal_reset_pending_q,
+ &clist_local);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ printk(KERN_NOTICE "megasas: HBA reset wait ...\n");
+ for (i = 0; i < wait_time; i++) {
+ msleep(1000);
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ adprecovery = instance->adprecovery;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ if (adprecovery == MEGASAS_HBA_OPERATIONAL)
+ break;
+ }
+
+ if (adprecovery != MEGASAS_HBA_OPERATIONAL) {
+ printk(KERN_NOTICE "megasas: reset: Stopping HBA.\n");
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ return FAILED;
+ }
+
+ reset_index = 0;
+ while (!list_empty(&clist_local)) {
+ reset_cmd = list_entry((&clist_local)->next,
+ struct megasas_cmd, list);
+ list_del_init(&reset_cmd->list);
+ if (reset_cmd->scmd) {
+ reset_cmd->scmd->result = DID_RESET << 16;
+ printk(KERN_NOTICE "%d:%p reset [%02x], %#lx\n",
+ reset_index, reset_cmd,
+ reset_cmd->scmd->cmnd[0],
+ reset_cmd->scmd->serial_number);
+
+ reset_cmd->scmd->scsi_done(reset_cmd->scmd);
+ megasas_return_cmd(instance, reset_cmd);
+ } else if (reset_cmd->sync_cmd) {
+ printk(KERN_NOTICE "megasas:%p synch cmds"
+ "reset queue\n",
+ reset_cmd);
+
+ reset_cmd->cmd_status = ENODATA;
+ instance->instancet->fire_cmd(instance,
+ reset_cmd->frame_phys_addr,
+ 0, instance->reg_set);
+ } else {
+ printk(KERN_NOTICE "megasas: %p unexpected"
+ "cmds lst\n",
+ reset_cmd);
+ }
+ reset_index++;
+ }
+
+ return SUCCESS;
+ }
+
+ for (i = 0; i < wait_time; i++) {
+
+ int outstanding = atomic_read(&instance->fw_outstanding);
+
+ if (!outstanding)
+ break;
+
+ if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
+ printk(KERN_NOTICE "megasas: [%2d]waiting for %d "
+ "commands to complete\n",i,outstanding);
+ /*
+ * Call cmd completion routine. Cmd to be
+ * be completed directly without depending on isr.
+ */
+ megasas_complete_cmd_dpc((unsigned long)instance);
+ }
+
+ msleep(1000);
+ }
+
+ if (atomic_read(&instance->fw_outstanding)) {
+ printk(KERN_NOTICE "megaraid_sas: pending cmds after reset\n");
+ /*
+ * Send signal to FW to stop processing any pending cmds.
+ * The controller will be taken offline by the OS now.
+ */
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->reserved_0[0]);
+ } else {
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->inbound_doorbell);
+ }
+ megasas_dump_pending_frames(instance);
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ return FAILED;
+ }
+
+ printk(KERN_NOTICE "megaraid_sas: no pending cmds after reset\n");
+
+ return SUCCESS;
+}
+
+/**
+ * megasas_generic_reset - Generic reset routine
+ * @scmd: Mid-layer SCSI command
+ *
+ * This routine implements a generic reset handler for device, bus and host
+ * reset requests. Device, bus and host specific reset handlers can use this
+ * function after they do their specific tasks.
+ */
+static int megasas_generic_reset(struct scsi_cmnd *scmd)
+{
+ int ret_val;
+ struct megasas_instance *instance;
+
+ instance = (struct megasas_instance *)scmd->device->host->hostdata;
+
+ scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x retries=%x\n",
+ scmd->serial_number, scmd->cmnd[0], scmd->retries);
+
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
+ printk(KERN_ERR "megasas: cannot recover from previous reset "
+ "failures\n");
+ return FAILED;
+ }
+
+ ret_val = megasas_wait_for_outstanding(instance);
+ if (ret_val == SUCCESS)
+ printk(KERN_NOTICE "megasas: reset successful \n");
+ else
+ printk(KERN_ERR "megasas: failed to do reset\n");
+
+ return ret_val;
+}
+
+/**
+ * megasas_reset_timer - quiesce the adapter if required
+ * @scmd: scsi cmnd
+ *
+ * Sets the FW busy flag and reduces the host->can_queue if the
+ * cmd has not been completed within the timeout period.
+ */
+static enum
+blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
+{
+ struct megasas_cmd *cmd = (struct megasas_cmd *)scmd->SCp.ptr;
+ struct megasas_instance *instance;
+ unsigned long flags;
+
+ if (time_after(jiffies, scmd->jiffies_at_alloc +
+ (MEGASAS_DEFAULT_CMD_TIMEOUT * 2) * HZ)) {
+ return BLK_EH_NOT_HANDLED;
+ }
+
+ instance = cmd->instance;
+ if (!(instance->flag & MEGASAS_FW_BUSY)) {
+ /* FW is busy, throttle IO */
+ spin_lock_irqsave(instance->host->host_lock, flags);
+
+ instance->host->can_queue = 16;
+ instance->last_time = jiffies;
+ instance->flag |= MEGASAS_FW_BUSY;
+
+ spin_unlock_irqrestore(instance->host->host_lock, flags);
+ }
+ return BLK_EH_RESET_TIMER;
+}
+
+/**
+ * megasas_reset_device - Device reset handler entry point
+ */
+static int megasas_reset_device(struct scsi_cmnd *scmd)
+{
+ int ret;
+
+ /*
+ * First wait for all commands to complete
+ */
+ ret = megasas_generic_reset(scmd);
+
+ return ret;
+}
+
+/**
+ * megasas_reset_bus_host - Bus & host reset handler entry point
+ */
+static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
+{
+ int ret;
+
+ /*
+ * First wait for all commands to complete
+ */
+ ret = megasas_generic_reset(scmd);
+
+ return ret;
+}
+
+/**
+ * megasas_bios_param - Returns disk geometry for a disk
+ * @sdev: device handle
+ * @bdev: block device
+ * @capacity: drive capacity
+ * @geom: geometry parameters
+ */
+static int
+megasas_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int geom[])
+{
+ int heads;
+ int sectors;
+ sector_t cylinders;
+ unsigned long tmp;
+ /* Default heads (64) & sectors (32) */
+ heads = 64;
+ sectors = 32;
+
+ tmp = heads * sectors;
+ cylinders = capacity;
+
+ sector_div(cylinders, tmp);
+
+ /*
+ * Handle extended translation size for logical drives > 1Gb
+ */
+
+ if (capacity >= 0x200000) {
+ heads = 255;
+ sectors = 63;
+ tmp = heads*sectors;
+ cylinders = capacity;
+ sector_div(cylinders, tmp);
+ }
+
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+
+ return 0;
+}
+
+static void megasas_aen_polling(struct work_struct *work);
+
+/**
+ * megasas_service_aen - Processes an event notification
+ * @instance: Adapter soft state
+ * @cmd: AEN command completed by the ISR
+ *
+ * For AEN, driver sends a command down to FW that is held by the FW till an
+ * event occurs. When an event of interest occurs, FW completes the command
+ * that it was previously holding.
+ *
+ * This routines sends SIGIO signal to processes that have registered with the
+ * driver for AEN.
+ */
+static void
+megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd)
+{
+ unsigned long flags;
+ /*
+ * Don't signal app if it is just an aborted previously registered aen
+ */
+ if ((!cmd->abort_aen) && (instance->unload == 0)) {
+ spin_lock_irqsave(&poll_aen_lock, flags);
+ megasas_poll_wait_aen = 1;
+ spin_unlock_irqrestore(&poll_aen_lock, flags);
+ wake_up(&megasas_poll_wait);
+ kill_fasync(&megasas_async_queue, SIGIO, POLL_IN);
+ }
+ else
+ cmd->abort_aen = 0;
+
+ instance->aen_cmd = NULL;
+ megasas_return_cmd(instance, cmd);
+
+ if ((instance->unload == 0) &&
+ ((instance->issuepend_done == 1))) {
+ struct megasas_aen_event *ev;
+ ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev) {
+ printk(KERN_ERR "megasas_service_aen: out of memory\n");
+ } else {
+ ev->instance = instance;
+ instance->ev = ev;
+ INIT_WORK(&ev->hotplug_work, megasas_aen_polling);
+ schedule_delayed_work(
+ (struct delayed_work *)&ev->hotplug_work, 0);
+ }
+ }
+}
+
+/*
+ * Scsi host template for megaraid_sas driver
+ */
+static struct scsi_host_template megasas_template = {
+
+ .module = THIS_MODULE,
+ .name = "LSI SAS based MegaRAID driver",
+ .proc_name = "megaraid_sas",
+ .slave_configure = megasas_slave_configure,
+ .queuecommand = megasas_queue_command,
+ .eh_device_reset_handler = megasas_reset_device,
+ .eh_bus_reset_handler = megasas_reset_bus_host,
+ .eh_host_reset_handler = megasas_reset_bus_host,
+ .eh_timed_out = megasas_reset_timer,
+ .bios_param = megasas_bios_param,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+/**
+ * megasas_complete_int_cmd - Completes an internal command
+ * @instance: Adapter soft state
+ * @cmd: Command to be completed
+ *
+ * The megasas_issue_blocked_cmd() function waits for a command to complete
+ * after it issues a command. This function wakes up that waiting routine by
+ * calling wake_up() on the wait queue.
+ */
+static void
+megasas_complete_int_cmd(struct megasas_instance *instance,
+ struct megasas_cmd *cmd)
+{
+ cmd->cmd_status = cmd->frame->io.cmd_status;
+
+ if (cmd->cmd_status == ENODATA) {
+ cmd->cmd_status = 0;
+ }
+ wake_up(&instance->int_cmd_wait_q);
+}
+
+/**
+ * megasas_complete_abort - Completes aborting a command
+ * @instance: Adapter soft state
+ * @cmd: Cmd that was issued to abort another cmd
+ *
+ * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q
+ * after it issues an abort on a previously issued command. This function
+ * wakes up all functions waiting on the same wait queue.
+ */
+static void
+megasas_complete_abort(struct megasas_instance *instance,
+ struct megasas_cmd *cmd)
+{
+ if (cmd->sync_cmd) {
+ cmd->sync_cmd = 0;
+ cmd->cmd_status = 0;
+ wake_up(&instance->abort_cmd_wait_q);
+ }
+
+ return;
+}
+
+/**
+ * megasas_complete_cmd - Completes a command
+ * @instance: Adapter soft state
+ * @cmd: Command to be completed
+ * @alt_status: If non-zero, use this value as status to
+ * SCSI mid-layer instead of the value returned
+ * by the FW. This should be used if caller wants
+ * an alternate status (as in the case of aborted
+ * commands)
+ */
+static void
+megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
+ u8 alt_status)
+{
+ int exception = 0;
+ struct megasas_header *hdr = &cmd->frame->hdr;
+ unsigned long flags;
+
+ /* flag for the retry reset */
+ cmd->retry_for_fw_reset = 0;
+
+ if (cmd->scmd)
+ cmd->scmd->SCp.ptr = NULL;
+
+ switch (hdr->cmd) {
+
+ case MFI_CMD_PD_SCSI_IO:
+ case MFI_CMD_LD_SCSI_IO:
+
+ /*
+ * MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been
+ * issued either through an IO path or an IOCTL path. If it
+ * was via IOCTL, we will send it to internal completion.
+ */
+ if (cmd->sync_cmd) {
+ cmd->sync_cmd = 0;
+ megasas_complete_int_cmd(instance, cmd);
+ break;
+ }
+
+ case MFI_CMD_LD_READ:
+ case MFI_CMD_LD_WRITE:
+
+ if (alt_status) {
+ cmd->scmd->result = alt_status << 16;
+ exception = 1;
+ }
+
+ if (exception) {
+
+ atomic_dec(&instance->fw_outstanding);
+
+ scsi_dma_unmap(cmd->scmd);
+ cmd->scmd->scsi_done(cmd->scmd);
+ megasas_return_cmd(instance, cmd);
+
+ break;
+ }
+
+ switch (hdr->cmd_status) {
+
+ case MFI_STAT_OK:
+ cmd->scmd->result = DID_OK << 16;
+ break;
+
+ case MFI_STAT_SCSI_IO_FAILED:
+ case MFI_STAT_LD_INIT_IN_PROGRESS:
+ cmd->scmd->result =
+ (DID_ERROR << 16) | hdr->scsi_status;
+ break;
+
+ case MFI_STAT_SCSI_DONE_WITH_ERROR:
+
+ cmd->scmd->result = (DID_OK << 16) | hdr->scsi_status;
+
+ if (hdr->scsi_status == SAM_STAT_CHECK_CONDITION) {
+ memset(cmd->scmd->sense_buffer, 0,
+ SCSI_SENSE_BUFFERSIZE);
+ memcpy(cmd->scmd->sense_buffer, cmd->sense,
+ hdr->sense_len);
+
+ cmd->scmd->result |= DRIVER_SENSE << 24;
+ }
+
+ break;
+
+ case MFI_STAT_LD_OFFLINE:
+ case MFI_STAT_DEVICE_NOT_FOUND:
+ cmd->scmd->result = DID_BAD_TARGET << 16;
+ break;
+
+ default:
+ printk(KERN_DEBUG "megasas: MFI FW status %#x\n",
+ hdr->cmd_status);
+ cmd->scmd->result = DID_ERROR << 16;
+ break;
+ }
+
+ atomic_dec(&instance->fw_outstanding);
+
+ scsi_dma_unmap(cmd->scmd);
+ cmd->scmd->scsi_done(cmd->scmd);
+ megasas_return_cmd(instance, cmd);
+
+ break;
+
+ case MFI_CMD_SMP:
+ case MFI_CMD_STP:
+ case MFI_CMD_DCMD:
+ if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET_INFO ||
+ cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET) {
+ spin_lock_irqsave(&poll_aen_lock, flags);
+ megasas_poll_wait_aen = 0;
+ spin_unlock_irqrestore(&poll_aen_lock, flags);
+ }
+
+ /*
+ * See if got an event notification
+ */
+ if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_WAIT)
+ megasas_service_aen(instance, cmd);
+ else
+ megasas_complete_int_cmd(instance, cmd);
+
+ break;
+
+ case MFI_CMD_ABORT:
+ /*
+ * Cmd issued to abort another cmd returned
+ */
+ megasas_complete_abort(instance, cmd);
+ break;
+
+ default:
+ printk("megasas: Unknown command completed! [0x%X]\n",
+ hdr->cmd);
+ break;
+ }
+}
+
+/**
+ * megasas_issue_pending_cmds_again - issue all pending cmds
+ * in FW again because of the fw reset
+ * @instance: Adapter soft state
+ */
+static inline void
+megasas_issue_pending_cmds_again(struct megasas_instance *instance)
+{
+ struct megasas_cmd *cmd;
+ struct list_head clist_local;
+ union megasas_evt_class_locale class_locale;
+ unsigned long flags;
+ u32 seq_num;
+
+ INIT_LIST_HEAD(&clist_local);
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ list_splice_init(&instance->internal_reset_pending_q, &clist_local);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ while (!list_empty(&clist_local)) {
+ cmd = list_entry((&clist_local)->next,
+ struct megasas_cmd, list);
+ list_del_init(&cmd->list);
+
+ if (cmd->sync_cmd || cmd->scmd) {
+ printk(KERN_NOTICE "megaraid_sas: command %p, %p:%d"
+ "detected to be pending while HBA reset.\n",
+ cmd, cmd->scmd, cmd->sync_cmd);
+
+ cmd->retry_for_fw_reset++;
+
+ if (cmd->retry_for_fw_reset == 3) {
+ printk(KERN_NOTICE "megaraid_sas: cmd %p, %p:%d"
+ "was tried multiple times during reset."
+ "Shutting down the HBA\n",
+ cmd, cmd->scmd, cmd->sync_cmd);
+ megaraid_sas_kill_hba(instance);
+
+ instance->adprecovery =
+ MEGASAS_HW_CRITICAL_ERROR;
+ return;
+ }
+ }
+
+ if (cmd->sync_cmd == 1) {
+ if (cmd->scmd) {
+ printk(KERN_NOTICE "megaraid_sas: unexpected"
+ "cmd attached to internal command!\n");
+ }
+ printk(KERN_NOTICE "megasas: %p synchronous cmd"
+ "on the internal reset queue,"
+ "issue it again.\n", cmd);
+ cmd->cmd_status = ENODATA;
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr ,
+ 0, instance->reg_set);
+ } else if (cmd->scmd) {
+ printk(KERN_NOTICE "megasas: %p scsi cmd [%02x],%#lx"
+ "detected on the internal queue, issue again.\n",
+ cmd, cmd->scmd->cmnd[0], cmd->scmd->serial_number);
+
+ atomic_inc(&instance->fw_outstanding);
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr,
+ cmd->frame_count-1, instance->reg_set);
+ } else {
+ printk(KERN_NOTICE "megasas: %p unexpected cmd on the"
+ "internal reset defer list while re-issue!!\n",
+ cmd);
+ }
+ }
+
+ if (instance->aen_cmd) {
+ printk(KERN_NOTICE "megaraid_sas: aen_cmd in def process\n");
+ megasas_return_cmd(instance, instance->aen_cmd);
+
+ instance->aen_cmd = NULL;
+ }
+
+ /*
+ * Initiate AEN (Asynchronous Event Notification)
+ */
+ seq_num = instance->last_seq_num;
+ class_locale.members.reserved = 0;
+ class_locale.members.locale = MR_EVT_LOCALE_ALL;
+ class_locale.members.class = MR_EVT_CLASS_DEBUG;
+
+ megasas_register_aen(instance, seq_num, class_locale.word);
+}
+
+/**
+ * Move the internal reset pending commands to a deferred queue.
+ *
+ * We move the commands pending at internal reset time to a
+ * pending queue. This queue would be flushed after successful
+ * completion of the internal reset sequence. if the internal reset
+ * did not complete in time, the kernel reset handler would flush
+ * these commands.
+ **/
+static void
+megasas_internal_reset_defer_cmds(struct megasas_instance *instance)
+{
+ struct megasas_cmd *cmd;
+ int i;
+ u32 max_cmd = instance->max_fw_cmds;
+ u32 defer_index;
+ unsigned long flags;
+
+ defer_index = 0;
+ spin_lock_irqsave(&instance->cmd_pool_lock, flags);
+ for (i = 0; i < max_cmd; i++) {
+ cmd = instance->cmd_list[i];
+ if (cmd->sync_cmd == 1 || cmd->scmd) {
+ printk(KERN_NOTICE "megasas: moving cmd[%d]:%p:%d:%p"
+ "on the defer queue as internal\n",
+ defer_index, cmd, cmd->sync_cmd, cmd->scmd);
+
+ if (!list_empty(&cmd->list)) {
+ printk(KERN_NOTICE "megaraid_sas: ERROR while"
+ " moving this cmd:%p, %d %p, it was"
+ "discovered on some list?\n",
+ cmd, cmd->sync_cmd, cmd->scmd);
+
+ list_del_init(&cmd->list);
+ }
+ defer_index++;
+ list_add_tail(&cmd->list,
+ &instance->internal_reset_pending_q);
+ }
+ }
+ spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
+}
+
+
+static void
+process_fw_state_change_wq(struct work_struct *work)
+{
+ struct megasas_instance *instance =
+ container_of(work, struct megasas_instance, work_init);
+ u32 wait;
+ unsigned long flags;
+
+ if (instance->adprecovery != MEGASAS_ADPRESET_SM_INFAULT) {
+ printk(KERN_NOTICE "megaraid_sas: error, recovery st %x \n",
+ instance->adprecovery);
+ return ;
+ }
+
+ if (instance->adprecovery == MEGASAS_ADPRESET_SM_INFAULT) {
+ printk(KERN_NOTICE "megaraid_sas: FW detected to be in fault"
+ "state, restarting it...\n");
+
+ instance->instancet->disable_intr(instance->reg_set);
+ atomic_set(&instance->fw_outstanding, 0);
+
+ atomic_set(&instance->fw_reset_no_pci_access, 1);
+ instance->instancet->adp_reset(instance, instance->reg_set);
+ atomic_set(&instance->fw_reset_no_pci_access, 0 );
+
+ printk(KERN_NOTICE "megaraid_sas: FW restarted successfully,"
+ "initiating next stage...\n");
+
+ printk(KERN_NOTICE "megaraid_sas: HBA recovery state machine,"
+ "state 2 starting...\n");
+
+ /*waitting for about 20 second before start the second init*/
+ for (wait = 0; wait < 30; wait++) {
+ msleep(1000);
+ }
+
+ if (megasas_transition_to_ready(instance)) {
+ printk(KERN_NOTICE "megaraid_sas:adapter not ready\n");
+
+ megaraid_sas_kill_hba(instance);
+ instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+ return ;
+ }
+
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1064R) ||
+ (instance->pdev->device == PCI_DEVICE_ID_DELL_PERC5) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_VERDE_ZCR)
+ ) {
+ *instance->consumer = *instance->producer;
+ } else {
+ *instance->consumer = 0;
+ *instance->producer = 0;
+ }
+
+ megasas_issue_init_mfi(instance);
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ instance->instancet->enable_intr(instance->reg_set);
+
+ megasas_issue_pending_cmds_again(instance);
+ instance->issuepend_done = 1;
+ }
+ return ;
+}
+
+/**
+ * megasas_deplete_reply_queue - Processes all completed commands
+ * @instance: Adapter soft state
+ * @alt_status: Alternate status to be returned to
+ * SCSI mid-layer instead of the status
+ * returned by the FW
+ * Note: this must be called with hba lock held
+ */
+static int
+megasas_deplete_reply_queue(struct megasas_instance *instance,
+ u8 alt_status)
+{
+ u32 mfiStatus;
+ u32 fw_state;
+
+ if ((mfiStatus = instance->instancet->check_reset(instance,
+ instance->reg_set)) == 1) {
+ return IRQ_HANDLED;
+ }
+
+ if ((mfiStatus = instance->instancet->clear_intr(
+ instance->reg_set)
+ ) == 0) {
+ return IRQ_NONE;
+ }
+
+ instance->mfiStatus = mfiStatus;
+
+ if ((mfiStatus & MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE)) {
+ fw_state = instance->instancet->read_fw_status_reg(
+ instance->reg_set) & MFI_STATE_MASK;
+
+ if (fw_state != MFI_STATE_FAULT) {
+ printk(KERN_NOTICE "megaraid_sas: fw state:%x\n",
+ fw_state);
+ }
+
+ if ((fw_state == MFI_STATE_FAULT) &&
+ (instance->disableOnlineCtrlReset == 0)) {
+ printk(KERN_NOTICE "megaraid_sas: wait adp restart\n");
+
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS1064R) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_DELL_PERC5) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_VERDE_ZCR)) {
+
+ *instance->consumer =
+ MEGASAS_ADPRESET_INPROG_SIGN;
+ }
+
+
+ instance->instancet->disable_intr(instance->reg_set);
+ instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT;
+ instance->issuepend_done = 0;
+
+ atomic_set(&instance->fw_outstanding, 0);
+ megasas_internal_reset_defer_cmds(instance);
+
+ printk(KERN_NOTICE "megasas: fwState=%x, stage:%d\n",
+ fw_state, instance->adprecovery);
+
+ schedule_work(&instance->work_init);
+ return IRQ_HANDLED;
+
+ } else {
+ printk(KERN_NOTICE "megasas: fwstate:%x, dis_OCR=%x\n",
+ fw_state, instance->disableOnlineCtrlReset);
+ }
+ }
+
+ tasklet_schedule(&instance->isr_tasklet);
+ return IRQ_HANDLED;
+}
+/**
+ * megasas_isr - isr entry point
+ */
+static irqreturn_t megasas_isr(int irq, void *devp)
+{
+ struct megasas_instance *instance;
+ unsigned long flags;
+ irqreturn_t rc;
+
+ if (atomic_read(
+ &(((struct megasas_instance *)devp)->fw_reset_no_pci_access)))
+ return IRQ_HANDLED;
+
+ instance = (struct megasas_instance *)devp;
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ rc = megasas_deplete_reply_queue(instance, DID_OK);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ return rc;
+}
+
+/**
+ * megasas_transition_to_ready - Move the FW to READY state
+ * @instance: Adapter soft state
+ *
+ * During the initialization, FW passes can potentially be in any one of
+ * several possible states. If the FW in operational, waiting-for-handshake
+ * states, driver must take steps to bring it to ready state. Otherwise, it
+ * has to wait for the ready state.
+ */
+static int
+megasas_transition_to_ready(struct megasas_instance* instance)
+{
+ int i;
+ u8 max_wait;
+ u32 fw_state;
+ u32 cur_state;
+
+ fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
+
+ if (fw_state != MFI_STATE_READY)
+ printk(KERN_INFO "megasas: Waiting for FW to come to ready"
+ " state\n");
+
+ while (fw_state != MFI_STATE_READY) {
+
+ switch (fw_state) {
+
+ case MFI_STATE_FAULT:
+
+ printk(KERN_DEBUG "megasas: FW in FAULT state!!\n");
+ return -ENODEV;
+
+ case MFI_STATE_WAIT_HANDSHAKE:
+ /*
+ * Set the CLR bit in inbound doorbell
+ */
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+
+ writel(
+ MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
+ &instance->reg_set->reserved_0[0]);
+ } else {
+ writel(
+ MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
+ &instance->reg_set->inbound_doorbell);
+ }
+
+ max_wait = 2;
+ cur_state = MFI_STATE_WAIT_HANDSHAKE;
+ break;
+
+ case MFI_STATE_BOOT_MESSAGE_PENDING:
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ writel(MFI_INIT_HOTPLUG,
+ &instance->reg_set->reserved_0[0]);
+ } else
+ writel(MFI_INIT_HOTPLUG,
+ &instance->reg_set->inbound_doorbell);
+
+ max_wait = 10;
+ cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
+ break;
+
+ case MFI_STATE_OPERATIONAL:
+ /*
+ * Bring it to READY state; assuming max wait 10 secs
+ */
+ instance->instancet->disable_intr(instance->reg_set);
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ writel(MFI_RESET_FLAGS,
+ &instance->reg_set->reserved_0[0]);
+ } else
+ writel(MFI_RESET_FLAGS,
+ &instance->reg_set->inbound_doorbell);
+
+ max_wait = 60;
+ cur_state = MFI_STATE_OPERATIONAL;
+ break;
+
+ case MFI_STATE_UNDEFINED:
+ /*
+ * This state should not last for more than 2 seconds
+ */
+ max_wait = 2;
+ cur_state = MFI_STATE_UNDEFINED;
+ break;
+
+ case MFI_STATE_BB_INIT:
+ max_wait = 2;
+ cur_state = MFI_STATE_BB_INIT;
+ break;
+
+ case MFI_STATE_FW_INIT:
+ max_wait = 20;
+ cur_state = MFI_STATE_FW_INIT;
+ break;
+
+ case MFI_STATE_FW_INIT_2:
+ max_wait = 20;
+ cur_state = MFI_STATE_FW_INIT_2;
+ break;
+
+ case MFI_STATE_DEVICE_SCAN:
+ max_wait = 20;
+ cur_state = MFI_STATE_DEVICE_SCAN;
+ break;
+
+ case MFI_STATE_FLUSH_CACHE:
+ max_wait = 20;
+ cur_state = MFI_STATE_FLUSH_CACHE;
+ break;
+
+ default:
+ printk(KERN_DEBUG "megasas: Unknown state 0x%x\n",
+ fw_state);
+ return -ENODEV;
+ }
+
+ /*
+ * The cur_state should not last for more than max_wait secs
+ */
+ for (i = 0; i < (max_wait * 1000); i++) {
+ fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
+ MFI_STATE_MASK ;
+
+ if (fw_state == cur_state) {
+ msleep(1);
+ } else
+ break;
+ }
+
+ /*
+ * Return error if fw_state hasn't changed after max_wait
+ */
+ if (fw_state == cur_state) {
+ printk(KERN_DEBUG "FW state [%d] hasn't changed "
+ "in %d secs\n", fw_state, max_wait);
+ return -ENODEV;
+ }
+ }
+ printk(KERN_INFO "megasas: FW now in Ready state\n");
+
+ return 0;
+}
+
+/**
+ * megasas_teardown_frame_pool - Destroy the cmd frame DMA pool
+ * @instance: Adapter soft state
+ */
+static void megasas_teardown_frame_pool(struct megasas_instance *instance)
+{
+ int i;
+ u32 max_cmd = instance->max_fw_cmds;
+ struct megasas_cmd *cmd;
+
+ if (!instance->frame_dma_pool)
+ return;
+
+ /*
+ * Return all frames to pool
+ */
+ for (i = 0; i < max_cmd; i++) {
+
+ cmd = instance->cmd_list[i];
+
+ if (cmd->frame)
+ pci_pool_free(instance->frame_dma_pool, cmd->frame,
+ cmd->frame_phys_addr);
+
+ if (cmd->sense)
+ pci_pool_free(instance->sense_dma_pool, cmd->sense,
+ cmd->sense_phys_addr);
+ }
+
+ /*
+ * Now destroy the pool itself
+ */
+ pci_pool_destroy(instance->frame_dma_pool);
+ pci_pool_destroy(instance->sense_dma_pool);
+
+ instance->frame_dma_pool = NULL;
+ instance->sense_dma_pool = NULL;
+}
+
+/**
+ * megasas_create_frame_pool - Creates DMA pool for cmd frames
+ * @instance: Adapter soft state
+ *
+ * Each command packet has an embedded DMA memory buffer that is used for
+ * filling MFI frame and the SG list that immediately follows the frame. This
+ * function creates those DMA memory buffers for each command packet by using
+ * PCI pool facility.
+ */
+static int megasas_create_frame_pool(struct megasas_instance *instance)
+{
+ int i;
+ u32 max_cmd;
+ u32 sge_sz;
+ u32 sgl_sz;
+ u32 total_sz;
+ u32 frame_count;
+ struct megasas_cmd *cmd;
+
+ max_cmd = instance->max_fw_cmds;
+
+ /*
+ * Size of our frame is 64 bytes for MFI frame, followed by max SG
+ * elements and finally SCSI_SENSE_BUFFERSIZE bytes for sense buffer
+ */
+ sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
+ sizeof(struct megasas_sge32);
+
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
+ /*
+ * Calculated the number of 64byte frames required for SGL
+ */
+ sgl_sz = sge_sz * instance->max_num_sge;
+ frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE - 1) / MEGAMFI_FRAME_SIZE;
+ frame_count = 15;
+
+ /*
+ * We need one extra frame for the MFI command
+ */
+ frame_count++;
+
+ total_sz = MEGAMFI_FRAME_SIZE * frame_count;
+ /*
+ * Use DMA pool facility provided by PCI layer
+ */
+ instance->frame_dma_pool = pci_pool_create("megasas frame pool",
+ instance->pdev, total_sz, 64,
+ 0);
+
+ if (!instance->frame_dma_pool) {
+ printk(KERN_DEBUG "megasas: failed to setup frame pool\n");
+ return -ENOMEM;
+ }
+
+ instance->sense_dma_pool = pci_pool_create("megasas sense pool",
+ instance->pdev, 128, 4, 0);
+
+ if (!instance->sense_dma_pool) {
+ printk(KERN_DEBUG "megasas: failed to setup sense pool\n");
+
+ pci_pool_destroy(instance->frame_dma_pool);
+ instance->frame_dma_pool = NULL;
+
+ return -ENOMEM;
+ }
+
+ /*
+ * Allocate and attach a frame to each of the commands in cmd_list.
+ * By making cmd->index as the context instead of the &cmd, we can
+ * always use 32bit context regardless of the architecture
+ */
+ for (i = 0; i < max_cmd; i++) {
+
+ cmd = instance->cmd_list[i];
+
+ cmd->frame = pci_pool_alloc(instance->frame_dma_pool,
+ GFP_KERNEL, &cmd->frame_phys_addr);
+
+ cmd->sense = pci_pool_alloc(instance->sense_dma_pool,
+ GFP_KERNEL, &cmd->sense_phys_addr);
+
+ /*
+ * megasas_teardown_frame_pool() takes care of freeing
+ * whatever has been allocated
+ */
+ if (!cmd->frame || !cmd->sense) {
+ printk(KERN_DEBUG "megasas: pci_pool_alloc failed \n");
+ megasas_teardown_frame_pool(instance);
+ return -ENOMEM;
+ }
+
+ cmd->frame->io.context = cmd->index;
+ cmd->frame->io.pad_0 = 0;
+ }
+
+ return 0;
+}
+
+/**
+ * megasas_free_cmds - Free all the cmds in the free cmd pool
+ * @instance: Adapter soft state
+ */
+static void megasas_free_cmds(struct megasas_instance *instance)
+{
+ int i;
+ /* First free the MFI frame pool */
+ megasas_teardown_frame_pool(instance);
+
+ /* Free all the commands in the cmd_list */
+ for (i = 0; i < instance->max_fw_cmds; i++)
+ kfree(instance->cmd_list[i]);
+
+ /* Free the cmd_list buffer itself */
+ kfree(instance->cmd_list);
+ instance->cmd_list = NULL;
+
+ INIT_LIST_HEAD(&instance->cmd_pool);
+}
+
+/**
+ * megasas_alloc_cmds - Allocates the command packets
+ * @instance: Adapter soft state
+ *
+ * Each command that is issued to the FW, whether IO commands from the OS or
+ * internal commands like IOCTLs, are wrapped in local data structure called
+ * megasas_cmd. The frame embedded in this megasas_cmd is actually issued to
+ * the FW.
+ *
+ * Each frame has a 32-bit field called context (tag). This context is used
+ * to get back the megasas_cmd from the frame when a frame gets completed in
+ * the ISR. Typically the address of the megasas_cmd itself would be used as
+ * the context. But we wanted to keep the differences between 32 and 64 bit
+ * systems to the mininum. We always use 32 bit integers for the context. In
+ * this driver, the 32 bit values are the indices into an array cmd_list.
+ * This array is used only to look up the megasas_cmd given the context. The
+ * free commands themselves are maintained in a linked list called cmd_pool.
+ */
+static int megasas_alloc_cmds(struct megasas_instance *instance)
+{
+ int i;
+ int j;
+ u32 max_cmd;
+ struct megasas_cmd *cmd;
+
+ max_cmd = instance->max_fw_cmds;
+
+ /*
+ * instance->cmd_list is an array of struct megasas_cmd pointers.
+ * Allocate the dynamic array first and then allocate individual
+ * commands.
+ */
+ instance->cmd_list = kcalloc(max_cmd, sizeof(struct megasas_cmd*), GFP_KERNEL);
+
+ if (!instance->cmd_list) {
+ printk(KERN_DEBUG "megasas: out of memory\n");
+ return -ENOMEM;
+ }
+
+
+ for (i = 0; i < max_cmd; i++) {
+ instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd),
+ GFP_KERNEL);
+
+ if (!instance->cmd_list[i]) {
+
+ for (j = 0; j < i; j++)
+ kfree(instance->cmd_list[j]);
+
+ kfree(instance->cmd_list);
+ instance->cmd_list = NULL;
+
+ return -ENOMEM;
+ }
+ }
+
+ /*
+ * Add all the commands to command pool (instance->cmd_pool)
+ */
+ for (i = 0; i < max_cmd; i++) {
+ cmd = instance->cmd_list[i];
+ memset(cmd, 0, sizeof(struct megasas_cmd));
+ cmd->index = i;
+ cmd->scmd = NULL;
+ cmd->instance = instance;
+
+ list_add_tail(&cmd->list, &instance->cmd_pool);
+ }
+
+ /*
+ * Create a frame pool and assign one frame to each cmd
+ */
+ if (megasas_create_frame_pool(instance)) {
+ printk(KERN_DEBUG "megasas: Error creating frame DMA pool\n");
+ megasas_free_cmds(instance);
+ }
+
+ return 0;
+}
+
+/*
+ * megasas_get_pd_list_info - Returns FW's pd_list structure
+ * @instance: Adapter soft state
+ * @pd_list: pd_list structure
+ *
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure. This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+static int
+megasas_get_pd_list(struct megasas_instance *instance)
+{
+ int ret = 0, pd_index = 0;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct MR_PD_LIST *ci;
+ struct MR_PD_ADDRESS *pd_addr;
+ dma_addr_t ci_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas (get_pd_list): Failed to get cmd\n");
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ ci = pci_alloc_consistent(instance->pdev,
+ MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST), &ci_h);
+
+ if (!ci) {
+ printk(KERN_DEBUG "Failed to alloc mem for pd_list\n");
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(ci, 0, sizeof(*ci));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->mbox.b[0] = MR_PD_QUERY_TYPE_EXPOSED_TO_HOST;
+ dcmd->mbox.b[1] = 0;
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST);
+ dcmd->opcode = MR_DCMD_PD_LIST_QUERY;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST);
+
+ if (!megasas_issue_polled(instance, cmd)) {
+ ret = 0;
+ } else {
+ ret = -1;
+ }
+
+ /*
+ * the following function will get the instance PD LIST.
+ */
+
+ pd_addr = ci->addr;
+
+ if ( ret == 0 &&
+ (ci->count <
+ (MEGASAS_MAX_PD_CHANNELS * MEGASAS_MAX_DEV_PER_CHANNEL))) {
+
+ memset(instance->pd_list, 0,
+ MEGASAS_MAX_PD * sizeof(struct megasas_pd_list));
+
+ for (pd_index = 0; pd_index < ci->count; pd_index++) {
+
+ instance->pd_list[pd_addr->deviceId].tid =
+ pd_addr->deviceId;
+ instance->pd_list[pd_addr->deviceId].driveType =
+ pd_addr->scsiDevType;
+ instance->pd_list[pd_addr->deviceId].driveState =
+ MR_PD_STATE_SYSTEM;
+ pd_addr++;
+ }
+ }
+
+ pci_free_consistent(instance->pdev,
+ MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
+ ci, ci_h);
+ megasas_return_cmd(instance, cmd);
+
+ return ret;
+}
+
+/*
+ * megasas_get_ld_list_info - Returns FW's ld_list structure
+ * @instance: Adapter soft state
+ * @ld_list: ld_list structure
+ *
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure. This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+static int
+megasas_get_ld_list(struct megasas_instance *instance)
+{
+ int ret = 0, ld_index = 0, ids = 0;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct MR_LD_LIST *ci;
+ dma_addr_t ci_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas_get_ld_list: Failed to get cmd\n");
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ ci = pci_alloc_consistent(instance->pdev,
+ sizeof(struct MR_LD_LIST),
+ &ci_h);
+
+ if (!ci) {
+ printk(KERN_DEBUG "Failed to alloc mem in get_ld_list\n");
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(ci, 0, sizeof(*ci));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = sizeof(struct MR_LD_LIST);
+ dcmd->opcode = MR_DCMD_LD_GET_LIST;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = sizeof(struct MR_LD_LIST);
+ dcmd->pad_0 = 0;
+
+ if (!megasas_issue_polled(instance, cmd)) {
+ ret = 0;
+ } else {
+ ret = -1;
+ }
+
+ /* the following function will get the instance PD LIST */
+
+ if ((ret == 0) && (ci->ldCount <= MAX_LOGICAL_DRIVES)) {
+ memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
+
+ for (ld_index = 0; ld_index < ci->ldCount; ld_index++) {
+ if (ci->ldList[ld_index].state != 0) {
+ ids = ci->ldList[ld_index].ref.targetId;
+ instance->ld_ids[ids] =
+ ci->ldList[ld_index].ref.targetId;
+ }
+ }
+ }
+
+ pci_free_consistent(instance->pdev,
+ sizeof(struct MR_LD_LIST),
+ ci,
+ ci_h);
+
+ megasas_return_cmd(instance, cmd);
+ return ret;
+}
+
+/**
+ * megasas_get_controller_info - Returns FW's controller structure
+ * @instance: Adapter soft state
+ * @ctrl_info: Controller information structure
+ *
+ * Issues an internal command (DCMD) to get the FW's controller structure.
+ * This information is mainly used to find out the maximum IO transfer per
+ * command supported by the FW.
+ */
+static int
+megasas_get_ctrl_info(struct megasas_instance *instance,
+ struct megasas_ctrl_info *ctrl_info)
+{
+ int ret = 0;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct megasas_ctrl_info *ci;
+ dma_addr_t ci_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas: Failed to get a free cmd\n");
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ ci = pci_alloc_consistent(instance->pdev,
+ sizeof(struct megasas_ctrl_info), &ci_h);
+
+ if (!ci) {
+ printk(KERN_DEBUG "Failed to alloc mem for ctrl info\n");
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(ci, 0, sizeof(*ci));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = sizeof(struct megasas_ctrl_info);
+ dcmd->opcode = MR_DCMD_CTRL_GET_INFO;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = sizeof(struct megasas_ctrl_info);
+
+ if (!megasas_issue_polled(instance, cmd)) {
+ ret = 0;
+ memcpy(ctrl_info, ci, sizeof(struct megasas_ctrl_info));
+ } else {
+ ret = -1;
+ }
+
+ pci_free_consistent(instance->pdev, sizeof(struct megasas_ctrl_info),
+ ci, ci_h);
+
+ megasas_return_cmd(instance, cmd);
+ return ret;
+}
+
+/**
+ * megasas_issue_init_mfi - Initializes the FW
+ * @instance: Adapter soft state
+ *
+ * Issues the INIT MFI cmd
+ */
+static int
+megasas_issue_init_mfi(struct megasas_instance *instance)
+{
+ u32 context;
+
+ struct megasas_cmd *cmd;
+
+ struct megasas_init_frame *init_frame;
+ struct megasas_init_queue_info *initq_info;
+ dma_addr_t init_frame_h;
+ dma_addr_t initq_info_h;
+
+ /*
+ * Prepare a init frame. Note the init frame points to queue info
+ * structure. Each frame has SGL allocated after first 64 bytes. For
+ * this frame - since we don't need any SGL - we use SGL's space as
+ * queue info structure
+ *
+ * We will not get a NULL command below. We just created the pool.
+ */
+ cmd = megasas_get_cmd(instance);
+
+ init_frame = (struct megasas_init_frame *)cmd->frame;
+ initq_info = (struct megasas_init_queue_info *)
+ ((unsigned long)init_frame + 64);
+
+ init_frame_h = cmd->frame_phys_addr;
+ initq_info_h = init_frame_h + 64;
+
+ context = init_frame->context;
+ memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
+ memset(initq_info, 0, sizeof(struct megasas_init_queue_info));
+ init_frame->context = context;
+
+ initq_info->reply_queue_entries = instance->max_fw_cmds + 1;
+ initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h;
+
+ initq_info->producer_index_phys_addr_lo = instance->producer_h;
+ initq_info->consumer_index_phys_addr_lo = instance->consumer_h;
+
+ init_frame->cmd = MFI_CMD_INIT;
+ init_frame->cmd_status = 0xFF;
+ init_frame->queue_info_new_phys_addr_lo = initq_info_h;
+
+ init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info);
+
+ /*
+ * disable the intr before firing the init frame to FW
+ */
+ instance->instancet->disable_intr(instance->reg_set);
+
+ /*
+ * Issue the init frame in polled mode
+ */
+
+ if (megasas_issue_polled(instance, cmd)) {
+ printk(KERN_ERR "megasas: Failed to init firmware\n");
+ megasas_return_cmd(instance, cmd);
+ goto fail_fw_init;
+ }
+
+ megasas_return_cmd(instance, cmd);
+
+ return 0;
+
+fail_fw_init:
+ return -EINVAL;
+}
+
+/**
+ * megasas_start_timer - Initializes a timer object
+ * @instance: Adapter soft state
+ * @timer: timer object to be initialized
+ * @fn: timer function
+ * @interval: time interval between timer function call
+ */
+static inline void
+megasas_start_timer(struct megasas_instance *instance,
+ struct timer_list *timer,
+ void *fn, unsigned long interval)
+{
+ init_timer(timer);
+ timer->expires = jiffies + interval;
+ timer->data = (unsigned long)instance;
+ timer->function = fn;
+ add_timer(timer);
+}
+
+/**
+ * megasas_io_completion_timer - Timer fn
+ * @instance_addr: Address of adapter soft state
+ *
+ * Schedules tasklet for cmd completion
+ * if poll_mode_io is set
+ */
+static void
+megasas_io_completion_timer(unsigned long instance_addr)
+{
+ struct megasas_instance *instance =
+ (struct megasas_instance *)instance_addr;
+
+ if (atomic_read(&instance->fw_outstanding))
+ tasklet_schedule(&instance->isr_tasklet);
+
+ /* Restart timer */
+ if (poll_mode_io)
+ mod_timer(&instance->io_completion_timer,
+ jiffies + MEGASAS_COMPLETION_TIMER_INTERVAL);
+}
+
+/**
+ * megasas_init_mfi - Initializes the FW
+ * @instance: Adapter soft state
+ *
+ * This is the main function for initializing MFI firmware.
+ */
+static int megasas_init_mfi(struct megasas_instance *instance)
+{
+ u32 context_sz;
+ u32 reply_q_sz;
+ u32 max_sectors_1;
+ u32 max_sectors_2;
+ u32 tmp_sectors;
+ struct megasas_register_set __iomem *reg_set;
+ struct megasas_ctrl_info *ctrl_info;
+ /*
+ * Map the message registers
+ */
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
+ instance->base_addr = pci_resource_start(instance->pdev, 1);
+ } else {
+ instance->base_addr = pci_resource_start(instance->pdev, 0);
+ }
+
+ if (pci_request_regions(instance->pdev, "megasas: LSI")) {
+ printk(KERN_DEBUG "megasas: IO memory region busy!\n");
+ return -EBUSY;
+ }
+
+ instance->reg_set = ioremap_nocache(instance->base_addr, 8192);
+
+ if (!instance->reg_set) {
+ printk(KERN_DEBUG "megasas: Failed to map IO mem\n");
+ goto fail_ioremap;
+ }
+
+ reg_set = instance->reg_set;
+
+ switch(instance->pdev->device)
+ {
+ case PCI_DEVICE_ID_LSI_SAS1078R:
+ case PCI_DEVICE_ID_LSI_SAS1078DE:
+ instance->instancet = &megasas_instance_template_ppc;
+ break;
+ case PCI_DEVICE_ID_LSI_SAS1078GEN2:
+ case PCI_DEVICE_ID_LSI_SAS0079GEN2:
+ instance->instancet = &megasas_instance_template_gen2;
+ break;
+ case PCI_DEVICE_ID_LSI_SAS0073SKINNY:
+ case PCI_DEVICE_ID_LSI_SAS0071SKINNY:
+ instance->instancet = &megasas_instance_template_skinny;
+ break;
+ case PCI_DEVICE_ID_LSI_SAS1064R:
+ case PCI_DEVICE_ID_DELL_PERC5:
+ default:
+ instance->instancet = &megasas_instance_template_xscale;
+ break;
+ }
+
+ /*
+ * We expect the FW state to be READY
+ */
+ if (megasas_transition_to_ready(instance))
+ goto fail_ready_state;
+
+ /*
+ * Get various operational parameters from status register
+ */
+ instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
+ /*
+ * Reduce the max supported cmds by 1. This is to ensure that the
+ * reply_q_sz (1 more than the max cmd that driver may send)
+ * does not exceed max cmds that the FW can support
+ */
+ instance->max_fw_cmds = instance->max_fw_cmds-1;
+ instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
+ 0x10;
+ /*
+ * Create a pool of commands
+ */
+ if (megasas_alloc_cmds(instance))
+ goto fail_alloc_cmds;
+
+ /*
+ * Allocate memory for reply queue. Length of reply queue should
+ * be _one_ more than the maximum commands handled by the firmware.
+ *
+ * Note: When FW completes commands, it places corresponding contex
+ * values in this circular reply queue. This circular queue is a fairly
+ * typical producer-consumer queue. FW is the producer (of completed
+ * commands) and the driver is the consumer.
+ */
+ context_sz = sizeof(u32);
+ reply_q_sz = context_sz * (instance->max_fw_cmds + 1);
+
+ instance->reply_queue = pci_alloc_consistent(instance->pdev,
+ reply_q_sz,
+ &instance->reply_queue_h);
+
+ if (!instance->reply_queue) {
+ printk(KERN_DEBUG "megasas: Out of DMA mem for reply queue\n");
+ goto fail_reply_queue;
+ }
+
+ if (megasas_issue_init_mfi(instance))
+ goto fail_fw_init;
+
+ instance->fw_support_ieee = 0;
+ instance->fw_support_ieee =
+ (instance->instancet->read_fw_status_reg(reg_set) &
+ 0x04000000);
+
+ printk(KERN_NOTICE "megasas_init_mfi: fw_support_ieee=%d",
+ instance->fw_support_ieee);
+
+ if (instance->fw_support_ieee)
+ instance->flag_ieee = 1;
+
+ /** for passthrough
+ * the following function will get the PD LIST.
+ */
+
+ memset(instance->pd_list, 0 ,
+ (MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)));
+ megasas_get_pd_list(instance);
+
+ memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
+ megasas_get_ld_list(instance);
+
+ ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL);
+
+ /*
+ * Compute the max allowed sectors per IO: The controller info has two
+ * limits on max sectors. Driver should use the minimum of these two.
+ *
+ * 1 << stripe_sz_ops.min = max sectors per strip
+ *
+ * Note that older firmwares ( < FW ver 30) didn't report information
+ * to calculate max_sectors_1. So the number ended up as zero always.
+ */
+ tmp_sectors = 0;
+ if (ctrl_info && !megasas_get_ctrl_info(instance, ctrl_info)) {
+
+ max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) *
+ ctrl_info->max_strips_per_io;
+ max_sectors_2 = ctrl_info->max_request_size;
+
+ tmp_sectors = min_t(u32, max_sectors_1 , max_sectors_2);
+ instance->disableOnlineCtrlReset =
+ ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
+ }
+
+ instance->max_sectors_per_req = instance->max_num_sge *
+ PAGE_SIZE / 512;
+ if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
+ instance->max_sectors_per_req = tmp_sectors;
+
+ kfree(ctrl_info);
+
+ /*
+ * Setup tasklet for cmd completion
+ */
+
+ tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
+ (unsigned long)instance);
+
+ /* Initialize the cmd completion timer */
+ if (poll_mode_io)
+ megasas_start_timer(instance, &instance->io_completion_timer,
+ megasas_io_completion_timer,
+ MEGASAS_COMPLETION_TIMER_INTERVAL);
+ return 0;
+
+ fail_fw_init:
+
+ pci_free_consistent(instance->pdev, reply_q_sz,
+ instance->reply_queue, instance->reply_queue_h);
+ fail_reply_queue:
+ megasas_free_cmds(instance);
+
+ fail_alloc_cmds:
+ fail_ready_state:
+ iounmap(instance->reg_set);
+
+ fail_ioremap:
+ pci_release_regions(instance->pdev);
+
+ return -EINVAL;
+}
+
+/**
+ * megasas_release_mfi - Reverses the FW initialization
+ * @intance: Adapter soft state
+ */
+static void megasas_release_mfi(struct megasas_instance *instance)
+{
+ u32 reply_q_sz = sizeof(u32) * (instance->max_fw_cmds + 1);
+
+ pci_free_consistent(instance->pdev, reply_q_sz,
+ instance->reply_queue, instance->reply_queue_h);
+
+ megasas_free_cmds(instance);
+
+ iounmap(instance->reg_set);
+
+ pci_release_regions(instance->pdev);
+}
+
+/**
+ * megasas_get_seq_num - Gets latest event sequence numbers
+ * @instance: Adapter soft state
+ * @eli: FW event log sequence numbers information
+ *
+ * FW maintains a log of all events in a non-volatile area. Upper layers would
+ * usually find out the latest sequence number of the events, the seq number at
+ * the boot etc. They would "read" all the events below the latest seq number
+ * by issuing a direct fw cmd (DCMD). For the future events (beyond latest seq
+ * number), they would subsribe to AEN (asynchronous event notification) and
+ * wait for the events to happen.
+ */
+static int
+megasas_get_seq_num(struct megasas_instance *instance,
+ struct megasas_evt_log_info *eli)
+{
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct megasas_evt_log_info *el_info;
+ dma_addr_t el_info_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+ el_info = pci_alloc_consistent(instance->pdev,
+ sizeof(struct megasas_evt_log_info),
+ &el_info_h);
+
+ if (!el_info) {
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(el_info, 0, sizeof(*el_info));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0x0;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = sizeof(struct megasas_evt_log_info);
+ dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO;
+ dcmd->sgl.sge32[0].phys_addr = el_info_h;
+ dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_log_info);
+
+ megasas_issue_blocked_cmd(instance, cmd);
+
+ /*
+ * Copy the data back into callers buffer
+ */
+ memcpy(eli, el_info, sizeof(struct megasas_evt_log_info));
+
+ pci_free_consistent(instance->pdev, sizeof(struct megasas_evt_log_info),
+ el_info, el_info_h);
+
+ megasas_return_cmd(instance, cmd);
+
+ return 0;
+}
+
+/**
+ * megasas_register_aen - Registers for asynchronous event notification
+ * @instance: Adapter soft state
+ * @seq_num: The starting sequence number
+ * @class_locale: Class of the event
+ *
+ * This function subscribes for AEN for events beyond the @seq_num. It requests
+ * to be notified if and only if the event is of type @class_locale
+ */
+static int
+megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
+ u32 class_locale_word)
+{
+ int ret_val;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ union megasas_evt_class_locale curr_aen;
+ union megasas_evt_class_locale prev_aen;
+
+ /*
+ * If there an AEN pending already (aen_cmd), check if the
+ * class_locale of that pending AEN is inclusive of the new
+ * AEN request we currently have. If it is, then we don't have
+ * to do anything. In other words, whichever events the current
+ * AEN request is subscribing to, have already been subscribed
+ * to.
+ *
+ * If the old_cmd is _not_ inclusive, then we have to abort
+ * that command, form a class_locale that is superset of both
+ * old and current and re-issue to the FW
+ */
+
+ curr_aen.word = class_locale_word;
+
+ if (instance->aen_cmd) {
+
+ prev_aen.word = instance->aen_cmd->frame->dcmd.mbox.w[1];
+
+ /*
+ * A class whose enum value is smaller is inclusive of all
+ * higher values. If a PROGRESS (= -1) was previously
+ * registered, then a new registration requests for higher
+ * classes need not be sent to FW. They are automatically
+ * included.
+ *
+ * Locale numbers don't have such hierarchy. They are bitmap
+ * values
+ */
+ if ((prev_aen.members.class <= curr_aen.members.class) &&
+ !((prev_aen.members.locale & curr_aen.members.locale) ^
+ curr_aen.members.locale)) {
+ /*
+ * Previously issued event registration includes
+ * current request. Nothing to do.
+ */
+ return 0;
+ } else {
+ curr_aen.members.locale |= prev_aen.members.locale;
+
+ if (prev_aen.members.class < curr_aen.members.class)
+ curr_aen.members.class = prev_aen.members.class;
+
+ instance->aen_cmd->abort_aen = 1;
+ ret_val = megasas_issue_blocked_abort_cmd(instance,
+ instance->
+ aen_cmd);
+
+ if (ret_val) {
+ printk(KERN_DEBUG "megasas: Failed to abort "
+ "previous AEN command\n");
+ return ret_val;
+ }
+ }
+ }
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd)
+ return -ENOMEM;
+
+ dcmd = &cmd->frame->dcmd;
+
+ memset(instance->evt_detail, 0, sizeof(struct megasas_evt_detail));
+
+ /*
+ * Prepare DCMD for aen registration
+ */
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0x0;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ instance->last_seq_num = seq_num;
+ dcmd->data_xfer_len = sizeof(struct megasas_evt_detail);
+ dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT;
+ dcmd->mbox.w[0] = seq_num;
+ dcmd->mbox.w[1] = curr_aen.word;
+ dcmd->sgl.sge32[0].phys_addr = (u32) instance->evt_detail_h;
+ dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_detail);
+
+ if (instance->aen_cmd != NULL) {
+ megasas_return_cmd(instance, cmd);
+ return 0;
+ }
+
+ /*
+ * Store reference to the cmd used to register for AEN. When an
+ * application wants us to register for AEN, we have to abort this
+ * cmd and re-register with a new EVENT LOCALE supplied by that app
+ */
+ instance->aen_cmd = cmd;
+
+ /*
+ * Issue the aen registration frame
+ */
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr, 0, instance->reg_set);
+
+ return 0;
+}
+
+/**
+ * megasas_start_aen - Subscribes to AEN during driver load time
+ * @instance: Adapter soft state
+ */
+static int megasas_start_aen(struct megasas_instance *instance)
+{
+ struct megasas_evt_log_info eli;
+ union megasas_evt_class_locale class_locale;
+
+ /*
+ * Get the latest sequence number from FW
+ */
+ memset(&eli, 0, sizeof(eli));
+
+ if (megasas_get_seq_num(instance, &eli))
+ return -1;
+
+ /*
+ * Register AEN with FW for latest sequence number plus 1
+ */
+ class_locale.members.reserved = 0;
+ class_locale.members.locale = MR_EVT_LOCALE_ALL;
+ class_locale.members.class = MR_EVT_CLASS_DEBUG;
+
+ return megasas_register_aen(instance, eli.newest_seq_num + 1,
+ class_locale.word);
+}
+
+/**
+ * megasas_io_attach - Attaches this driver to SCSI mid-layer
+ * @instance: Adapter soft state
+ */
+static int megasas_io_attach(struct megasas_instance *instance)
+{
+ struct Scsi_Host *host = instance->host;
+
+ /*
+ * Export parameters required by SCSI mid-layer
+ */
+ host->irq = instance->pdev->irq;
+ host->unique_id = instance->unique_id;
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ host->can_queue =
+ instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
+ } else
+ host->can_queue =
+ instance->max_fw_cmds - MEGASAS_INT_CMDS;
+ host->this_id = instance->init_id;
+ host->sg_tablesize = instance->max_num_sge;
+ host->max_sectors = instance->max_sectors_per_req;
+ host->cmd_per_lun = 128;
+ host->max_channel = MEGASAS_MAX_CHANNELS - 1;
+ host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL;
+ host->max_lun = MEGASAS_MAX_LUN;
+ host->max_cmd_len = 16;
+
+ /*
+ * Notify the mid-layer about the new controller
+ */
+ if (scsi_add_host(host, &instance->pdev->dev)) {
+ printk(KERN_DEBUG "megasas: scsi_add_host failed\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Trigger SCSI to scan our drives
+ */
+ scsi_scan_host(host);
+ return 0;
+}
+
+static int
+megasas_set_dma_mask(struct pci_dev *pdev)
+{
+ /*
+ * All our contollers are capable of performing 64-bit DMA
+ */
+ if (IS_DMA64) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ goto fail_set_dma_mask;
+ }
+ } else {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ goto fail_set_dma_mask;
+ }
+ return 0;
+
+fail_set_dma_mask:
+ return 1;
+}
+
+/**
+ * megasas_probe_one - PCI hotplug entry point
+ * @pdev: PCI device structure
+ * @id: PCI ids of supported hotplugged adapter
+ */
+static int __devinit
+megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int rval;
+ struct Scsi_Host *host;
+ struct megasas_instance *instance;
+
+ /*
+ * Announce PCI information
+ */
+ printk(KERN_INFO "megasas: %#4.04x:%#4.04x:%#4.04x:%#4.04x: ",
+ pdev->vendor, pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+
+ printk("bus %d:slot %d:func %d\n",
+ pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+
+ /*
+ * PCI prepping: enable device set bus mastering and dma mask
+ */
+ rval = pci_enable_device(pdev);
+
+ if (rval) {
+ return rval;
+ }
+
+ pci_set_master(pdev);
+
+ if (megasas_set_dma_mask(pdev))
+ goto fail_set_dma_mask;
+
+ host = scsi_host_alloc(&megasas_template,
+ sizeof(struct megasas_instance));
+
+ if (!host) {
+ printk(KERN_DEBUG "megasas: scsi_host_alloc failed\n");
+ goto fail_alloc_instance;
+ }
+
+ instance = (struct megasas_instance *)host->hostdata;
+ memset(instance, 0, sizeof(*instance));
+ atomic_set( &instance->fw_reset_no_pci_access, 0 );
+
+ instance->producer = pci_alloc_consistent(pdev, sizeof(u32),
+ &instance->producer_h);
+ instance->consumer = pci_alloc_consistent(pdev, sizeof(u32),
+ &instance->consumer_h);
+
+ if (!instance->producer || !instance->consumer) {
+ printk(KERN_DEBUG "megasas: Failed to allocate memory for "
+ "producer, consumer\n");
+ goto fail_alloc_dma_buf;
+ }
+
+ *instance->producer = 0;
+ *instance->consumer = 0;
+ megasas_poll_wait_aen = 0;
+ instance->flag_ieee = 0;
+ instance->ev = NULL;
+ instance->issuepend_done = 1;
+ instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+ megasas_poll_wait_aen = 0;
+
+ instance->evt_detail = pci_alloc_consistent(pdev,
+ sizeof(struct
+ megasas_evt_detail),
+ &instance->evt_detail_h);
+
+ if (!instance->evt_detail) {
+ printk(KERN_DEBUG "megasas: Failed to allocate memory for "
+ "event detail structure\n");
+ goto fail_alloc_dma_buf;
+ }
+
+ /*
+ * Initialize locks and queues
+ */
+ INIT_LIST_HEAD(&instance->cmd_pool);
+ INIT_LIST_HEAD(&instance->internal_reset_pending_q);
+
+ atomic_set(&instance->fw_outstanding,0);
+
+ init_waitqueue_head(&instance->int_cmd_wait_q);
+ init_waitqueue_head(&instance->abort_cmd_wait_q);
+
+ spin_lock_init(&instance->cmd_pool_lock);
+ spin_lock_init(&instance->hba_lock);
+ spin_lock_init(&instance->completion_lock);
+ spin_lock_init(&poll_aen_lock);
+
+ mutex_init(&instance->aen_mutex);
+
+ /*
+ * Initialize PCI related and misc parameters
+ */
+ instance->pdev = pdev;
+ instance->host = host;
+ instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
+ instance->init_id = MEGASAS_DEFAULT_INIT_ID;
+
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ instance->flag_ieee = 1;
+ sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
+ } else
+ sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);
+
+ megasas_dbg_lvl = 0;
+ instance->flag = 0;
+ instance->unload = 1;
+ instance->last_time = 0;
+ instance->disableOnlineCtrlReset = 1;
+
+ INIT_WORK(&instance->work_init, process_fw_state_change_wq);
+
+ /*
+ * Initialize MFI Firmware
+ */
+ if (megasas_init_mfi(instance))
+ goto fail_init_mfi;
+
+ /*
+ * Register IRQ
+ */
+ if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED, "megasas", instance)) {
+ printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
+ goto fail_irq;
+ }
+
+ instance->instancet->enable_intr(instance->reg_set);
+
+ /*
+ * Store instance in PCI softstate
+ */
+ pci_set_drvdata(pdev, instance);
+
+ /*
+ * Add this controller to megasas_mgmt_info structure so that it
+ * can be exported to management applications
+ */
+ megasas_mgmt_info.count++;
+ megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = instance;
+ megasas_mgmt_info.max_index++;
+
+ /*
+ * Initiate AEN (Asynchronous Event Notification)
+ */
+ if (megasas_start_aen(instance)) {
+ printk(KERN_DEBUG "megasas: start aen failed\n");
+ goto fail_start_aen;
+ }
+
+ /*
+ * Register with SCSI mid-layer
+ */
+ if (megasas_io_attach(instance))
+ goto fail_io_attach;
+
+ instance->unload = 0;
+ return 0;
+
+ fail_start_aen:
+ fail_io_attach:
+ megasas_mgmt_info.count--;
+ megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL;
+ megasas_mgmt_info.max_index--;
+
+ pci_set_drvdata(pdev, NULL);
+ instance->instancet->disable_intr(instance->reg_set);
+ free_irq(instance->pdev->irq, instance);
+
+ megasas_release_mfi(instance);
+
+ fail_irq:
+ fail_init_mfi:
+ fail_alloc_dma_buf:
+ if (instance->evt_detail)
+ pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
+ instance->evt_detail,
+ instance->evt_detail_h);
+
+ if (instance->producer)
+ pci_free_consistent(pdev, sizeof(u32), instance->producer,
+ instance->producer_h);
+ if (instance->consumer)
+ pci_free_consistent(pdev, sizeof(u32), instance->consumer,
+ instance->consumer_h);
+ scsi_host_put(host);
+
+ fail_alloc_instance:
+ fail_set_dma_mask:
+ pci_disable_device(pdev);
+
+ return -ENODEV;
+}
+
+/**
+ * megasas_flush_cache - Requests FW to flush all its caches
+ * @instance: Adapter soft state
+ */
+static void megasas_flush_cache(struct megasas_instance *instance)
+{
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR)
+ return;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd)
+ return;
+
+ dcmd = &cmd->frame->dcmd;
+
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0x0;
+ dcmd->sge_count = 0;
+ dcmd->flags = MFI_FRAME_DIR_NONE;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = 0;
+ dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH;
+ dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE;
+
+ megasas_issue_blocked_cmd(instance, cmd);
+
+ megasas_return_cmd(instance, cmd);
+
+ return;
+}
+
+/**
+ * megasas_shutdown_controller - Instructs FW to shutdown the controller
+ * @instance: Adapter soft state
+ * @opcode: Shutdown/Hibernate
+ */
+static void megasas_shutdown_controller(struct megasas_instance *instance,
+ u32 opcode)
+{
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR)
+ return;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd)
+ return;
+
+ if (instance->aen_cmd)
+ megasas_issue_blocked_abort_cmd(instance, instance->aen_cmd);
+
+ dcmd = &cmd->frame->dcmd;
+
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0x0;
+ dcmd->sge_count = 0;
+ dcmd->flags = MFI_FRAME_DIR_NONE;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = 0;
+ dcmd->opcode = opcode;
+
+ megasas_issue_blocked_cmd(instance, cmd);
+
+ megasas_return_cmd(instance, cmd);
+
+ return;
+}
+
+#ifdef CONFIG_PM
+/**
+ * megasas_suspend - driver suspend entry point
+ * @pdev: PCI device structure
+ * @state: PCI power state to suspend routine
+ */
+static int
+megasas_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct Scsi_Host *host;
+ struct megasas_instance *instance;
+
+ instance = pci_get_drvdata(pdev);
+ host = instance->host;
+ instance->unload = 1;
+
+ if (poll_mode_io)
+ del_timer_sync(&instance->io_completion_timer);
+
+ megasas_flush_cache(instance);
+ megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN);
+
+ /* cancel the delayed work if this work still in queue */
+ if (instance->ev != NULL) {
+ struct megasas_aen_event *ev = instance->ev;
+ cancel_delayed_work(
+ (struct delayed_work *)&ev->hotplug_work);
+ flush_scheduled_work();
+ instance->ev = NULL;
+ }
+
+ tasklet_kill(&instance->isr_tasklet);
+
+ pci_set_drvdata(instance->pdev, instance);
+ instance->instancet->disable_intr(instance->reg_set);
+ free_irq(instance->pdev->irq, instance);
+
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+/**
+ * megasas_resume- driver resume entry point
+ * @pdev: PCI device structure
+ */
+static int
+megasas_resume(struct pci_dev *pdev)
+{
+ int rval;
+ struct Scsi_Host *host;
+ struct megasas_instance *instance;
+
+ instance = pci_get_drvdata(pdev);
+ host = instance->host;
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+
+ /*
+ * PCI prepping: enable device set bus mastering and dma mask
+ */
+ rval = pci_enable_device(pdev);
+
+ if (rval) {
+ printk(KERN_ERR "megasas: Enable device failed\n");
+ return rval;
+ }
+
+ pci_set_master(pdev);
+
+ if (megasas_set_dma_mask(pdev))
+ goto fail_set_dma_mask;
+
+ /*
+ * Initialize MFI Firmware
+ */
+
+ *instance->producer = 0;
+ *instance->consumer = 0;
+
+ atomic_set(&instance->fw_outstanding, 0);
+
+ /*
+ * We expect the FW state to be READY
+ */
+ if (megasas_transition_to_ready(instance))
+ goto fail_ready_state;
+
+ if (megasas_issue_init_mfi(instance))
+ goto fail_init_mfi;
+
+ tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
+ (unsigned long)instance);
+
+ /*
+ * Register IRQ
+ */
+ if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED,
+ "megasas", instance)) {
+ printk(KERN_ERR "megasas: Failed to register IRQ\n");
+ goto fail_irq;
+ }
+
+ instance->instancet->enable_intr(instance->reg_set);
+
+ /*
+ * Initiate AEN (Asynchronous Event Notification)
+ */
+ if (megasas_start_aen(instance))
+ printk(KERN_ERR "megasas: Start AEN failed\n");
+
+ /* Initialize the cmd completion timer */
+ if (poll_mode_io)
+ megasas_start_timer(instance, &instance->io_completion_timer,
+ megasas_io_completion_timer,
+ MEGASAS_COMPLETION_TIMER_INTERVAL);
+ instance->unload = 0;
+
+ return 0;
+
+fail_irq:
+fail_init_mfi:
+ if (instance->evt_detail)
+ pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
+ instance->evt_detail,
+ instance->evt_detail_h);
+
+ if (instance->producer)
+ pci_free_consistent(pdev, sizeof(u32), instance->producer,
+ instance->producer_h);
+ if (instance->consumer)
+ pci_free_consistent(pdev, sizeof(u32), instance->consumer,
+ instance->consumer_h);
+ scsi_host_put(host);
+
+fail_set_dma_mask:
+fail_ready_state:
+
+ pci_disable_device(pdev);
+
+ return -ENODEV;
+}
+#else
+#define megasas_suspend NULL
+#define megasas_resume NULL
+#endif
+
+/**
+ * megasas_detach_one - PCI hot"un"plug entry point
+ * @pdev: PCI device structure
+ */
+static void __devexit megasas_detach_one(struct pci_dev *pdev)
+{
+ int i;
+ struct Scsi_Host *host;
+ struct megasas_instance *instance;
+
+ instance = pci_get_drvdata(pdev);
+ instance->unload = 1;
+ host = instance->host;
+
+ if (poll_mode_io)
+ del_timer_sync(&instance->io_completion_timer);
+
+ scsi_remove_host(instance->host);
+ megasas_flush_cache(instance);
+ megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
+
+ /* cancel the delayed work if this work still in queue*/
+ if (instance->ev != NULL) {
+ struct megasas_aen_event *ev = instance->ev;
+ cancel_delayed_work(
+ (struct delayed_work *)&ev->hotplug_work);
+ flush_scheduled_work();
+ instance->ev = NULL;
+ }
+
+ tasklet_kill(&instance->isr_tasklet);
+
+ /*
+ * Take the instance off the instance array. Note that we will not
+ * decrement the max_index. We let this array be sparse array
+ */
+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
+ if (megasas_mgmt_info.instance[i] == instance) {
+ megasas_mgmt_info.count--;
+ megasas_mgmt_info.instance[i] = NULL;
+
+ break;
+ }
+ }
+
+ pci_set_drvdata(instance->pdev, NULL);
+
+ instance->instancet->disable_intr(instance->reg_set);
+
+ free_irq(instance->pdev->irq, instance);
+
+ megasas_release_mfi(instance);
+
+ pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
+ instance->evt_detail, instance->evt_detail_h);
+
+ pci_free_consistent(pdev, sizeof(u32), instance->producer,
+ instance->producer_h);
+
+ pci_free_consistent(pdev, sizeof(u32), instance->consumer,
+ instance->consumer_h);
+
+ scsi_host_put(host);
+
+ pci_set_drvdata(pdev, NULL);
+
+ pci_disable_device(pdev);
+
+ return;
+}
+
+/**
+ * megasas_shutdown - Shutdown entry point
+ * @device: Generic device structure
+ */
+static void megasas_shutdown(struct pci_dev *pdev)
+{
+ struct megasas_instance *instance = pci_get_drvdata(pdev);
+ instance->unload = 1;
+ megasas_flush_cache(instance);
+ megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
+}
+
+/**
+ * megasas_mgmt_open - char node "open" entry point
+ */
+static int megasas_mgmt_open(struct inode *inode, struct file *filep)
+{
+ cycle_kernel_lock();
+ /*
+ * Allow only those users with admin rights
+ */
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ return 0;
+}
+
+/**
+ * megasas_mgmt_fasync - Async notifier registration from applications
+ *
+ * This function adds the calling process to a driver global queue. When an
+ * event occurs, SIGIO will be sent to all processes in this queue.
+ */
+static int megasas_mgmt_fasync(int fd, struct file *filep, int mode)
+{
+ int rc;
+
+ mutex_lock(&megasas_async_queue_mutex);
+
+ rc = fasync_helper(fd, filep, mode, &megasas_async_queue);
+
+ mutex_unlock(&megasas_async_queue_mutex);
+
+ if (rc >= 0) {
+ /* For sanity check when we get ioctl */
+ filep->private_data = filep;
+ return 0;
+ }
+
+ printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc);
+
+ return rc;
+}
+
+/**
+ * megasas_mgmt_poll - char node "poll" entry point
+ * */
+static unsigned int megasas_mgmt_poll(struct file *file, poll_table *wait)
+{
+ unsigned int mask;
+ unsigned long flags;
+ poll_wait(file, &megasas_poll_wait, wait);
+ spin_lock_irqsave(&poll_aen_lock, flags);
+ if (megasas_poll_wait_aen)
+ mask = (POLLIN | POLLRDNORM);
+ else
+ mask = 0;
+ spin_unlock_irqrestore(&poll_aen_lock, flags);
+ return mask;
+}
+
+/**
+ * megasas_mgmt_fw_ioctl - Issues management ioctls to FW
+ * @instance: Adapter soft state
+ * @argp: User's ioctl packet
+ */
+static int
+megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
+ struct megasas_iocpacket __user * user_ioc,
+ struct megasas_iocpacket *ioc)
+{
+ struct megasas_sge32 *kern_sge32;
+ struct megasas_cmd *cmd;
+ void *kbuff_arr[MAX_IOCTL_SGE];
+ dma_addr_t buf_handle = 0;
+ int error = 0, i;
+ void *sense = NULL;
+ dma_addr_t sense_handle;
+ unsigned long *sense_ptr;
+
+ memset(kbuff_arr, 0, sizeof(kbuff_arr));
+
+ if (ioc->sge_count > MAX_IOCTL_SGE) {
+ printk(KERN_DEBUG "megasas: SGE count [%d] > max limit [%d]\n",
+ ioc->sge_count, MAX_IOCTL_SGE);
+ return -EINVAL;
+ }
+
+ cmd = megasas_get_cmd(instance);
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas: Failed to get a cmd packet\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * User's IOCTL packet has 2 frames (maximum). Copy those two
+ * frames into our cmd's frames. cmd->frame's context will get
+ * overwritten when we copy from user's frames. So set that value
+ * alone separately
+ */
+ memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE);
+ cmd->frame->hdr.context = cmd->index;
+ cmd->frame->hdr.pad_0 = 0;
+
+ /*
+ * The management interface between applications and the fw uses
+ * MFI frames. E.g, RAID configuration changes, LD property changes
+ * etc are accomplishes through different kinds of MFI frames. The
+ * driver needs to care only about substituting user buffers with
+ * kernel buffers in SGLs. The location of SGL is embedded in the
+ * struct iocpacket itself.
+ */
+ kern_sge32 = (struct megasas_sge32 *)
+ ((unsigned long)cmd->frame + ioc->sgl_off);
+
+ /*
+ * For each user buffer, create a mirror buffer and copy in
+ */
+ for (i = 0; i < ioc->sge_count; i++) {
+ if (!ioc->sgl[i].iov_len)
+ continue;
+
+ kbuff_arr[i] = dma_alloc_coherent(&instance->pdev->dev,
+ ioc->sgl[i].iov_len,
+ &buf_handle, GFP_KERNEL);
+ if (!kbuff_arr[i]) {
+ printk(KERN_DEBUG "megasas: Failed to alloc "
+ "kernel SGL buffer for IOCTL \n");
+ error = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * We don't change the dma_coherent_mask, so
+ * pci_alloc_consistent only returns 32bit addresses
+ */
+ kern_sge32[i].phys_addr = (u32) buf_handle;
+ kern_sge32[i].length = ioc->sgl[i].iov_len;
+
+ /*
+ * We created a kernel buffer corresponding to the
+ * user buffer. Now copy in from the user buffer
+ */
+ if (copy_from_user(kbuff_arr[i], ioc->sgl[i].iov_base,
+ (u32) (ioc->sgl[i].iov_len))) {
+ error = -EFAULT;
+ goto out;
+ }
+ }
+
+ if (ioc->sense_len) {
+ sense = dma_alloc_coherent(&instance->pdev->dev, ioc->sense_len,
+ &sense_handle, GFP_KERNEL);
+ if (!sense) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ sense_ptr =
+ (unsigned long *) ((unsigned long)cmd->frame + ioc->sense_off);
+ *sense_ptr = sense_handle;
+ }
+
+ /*
+ * Set the sync_cmd flag so that the ISR knows not to complete this
+ * cmd to the SCSI mid-layer
+ */
+ cmd->sync_cmd = 1;
+ megasas_issue_blocked_cmd(instance, cmd);
+ cmd->sync_cmd = 0;
+
+ /*
+ * copy out the kernel buffers to user buffers
+ */
+ for (i = 0; i < ioc->sge_count; i++) {
+ if (copy_to_user(ioc->sgl[i].iov_base, kbuff_arr[i],
+ ioc->sgl[i].iov_len)) {
+ error = -EFAULT;
+ goto out;
+ }
+ }
+
+ /*
+ * copy out the sense
+ */
+ if (ioc->sense_len) {
+ /*
+ * sense_ptr points to the location that has the user
+ * sense buffer address
+ */
+ sense_ptr = (unsigned long *) ((unsigned long)ioc->frame.raw +
+ ioc->sense_off);
+
+ if (copy_to_user((void __user *)((unsigned long)(*sense_ptr)),
+ sense, ioc->sense_len)) {
+ printk(KERN_ERR "megasas: Failed to copy out to user "
+ "sense data\n");
+ error = -EFAULT;
+ goto out;
+ }
+ }
+
+ /*
+ * copy the status codes returned by the fw
+ */
+ if (copy_to_user(&user_ioc->frame.hdr.cmd_status,
+ &cmd->frame->hdr.cmd_status, sizeof(u8))) {
+ printk(KERN_DEBUG "megasas: Error copying out cmd_status\n");
+ error = -EFAULT;
+ }
+
+ out:
+ if (sense) {
+ dma_free_coherent(&instance->pdev->dev, ioc->sense_len,
+ sense, sense_handle);
+ }
+
+ for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
+ dma_free_coherent(&instance->pdev->dev,
+ kern_sge32[i].length,
+ kbuff_arr[i], kern_sge32[i].phys_addr);
+ }
+
+ megasas_return_cmd(instance, cmd);
+ return error;
+}
+
+static struct megasas_instance *megasas_lookup_instance(u16 host_no)
+{
+ int i;
+
+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
+
+ if ((megasas_mgmt_info.instance[i]) &&
+ (megasas_mgmt_info.instance[i]->host->host_no == host_no))
+ return megasas_mgmt_info.instance[i];
+ }
+
+ return NULL;
+}
+
+static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
+{
+ struct megasas_iocpacket __user *user_ioc =
+ (struct megasas_iocpacket __user *)arg;
+ struct megasas_iocpacket *ioc;
+ struct megasas_instance *instance;
+ int error;
+ int i;
+ unsigned long flags;
+ u32 wait_time = MEGASAS_RESET_WAIT_TIME;
+
+ ioc = kmalloc(sizeof(*ioc), GFP_KERNEL);
+ if (!ioc)
+ return -ENOMEM;
+
+ if (copy_from_user(ioc, user_ioc, sizeof(*ioc))) {
+ error = -EFAULT;
+ goto out_kfree_ioc;
+ }
+
+ instance = megasas_lookup_instance(ioc->host_no);
+ if (!instance) {
+ error = -ENODEV;
+ goto out_kfree_ioc;
+ }
+
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
+ printk(KERN_ERR "Controller in crit error\n");
+ error = -ENODEV;
+ goto out_kfree_ioc;
+ }
+
+ if (instance->unload == 1) {
+ error = -ENODEV;
+ goto out_kfree_ioc;
+ }
+
+ /*
+ * We will allow only MEGASAS_INT_CMDS number of parallel ioctl cmds
+ */
+ if (down_interruptible(&instance->ioctl_sem)) {
+ error = -ERESTARTSYS;
+ goto out_kfree_ioc;
+ }
+
+ for (i = 0; i < wait_time; i++) {
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery == MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ break;
+ }
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
+ printk(KERN_NOTICE "megasas: waiting"
+ "for controller reset to finish\n");
+ }
+
+ msleep(1000);
+ }
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ printk(KERN_ERR "megaraid_sas: timed out while"
+ "waiting for HBA to recover\n");
+ error = -ENODEV;
+ goto out_kfree_ioc;
+ }
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ error = megasas_mgmt_fw_ioctl(instance, user_ioc, ioc);
+ up(&instance->ioctl_sem);
+
+ out_kfree_ioc:
+ kfree(ioc);
+ return error;
+}
+
+static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg)
+{
+ struct megasas_instance *instance;
+ struct megasas_aen aen;
+ int error;
+ int i;
+ unsigned long flags;
+ u32 wait_time = MEGASAS_RESET_WAIT_TIME;
+
+ if (file->private_data != file) {
+ printk(KERN_DEBUG "megasas: fasync_helper was not "
+ "called first\n");
+ return -EINVAL;
+ }
+
+ if (copy_from_user(&aen, (void __user *)arg, sizeof(aen)))
+ return -EFAULT;
+
+ instance = megasas_lookup_instance(aen.host_no);
+
+ if (!instance)
+ return -ENODEV;
+
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
+ return -ENODEV;
+ }
+
+ if (instance->unload == 1) {
+ return -ENODEV;
+ }
+
+ for (i = 0; i < wait_time; i++) {
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery == MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock,
+ flags);
+ break;
+ }
+
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
+ printk(KERN_NOTICE "megasas: waiting for"
+ "controller reset to finish\n");
+ }
+
+ msleep(1000);
+ }
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) {
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ printk(KERN_ERR "megaraid_sas: timed out while waiting"
+ "for HBA to recover.\n");
+ return -ENODEV;
+ }
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ mutex_lock(&instance->aen_mutex);
+ error = megasas_register_aen(instance, aen.seq_num,
+ aen.class_locale_word);
+ mutex_unlock(&instance->aen_mutex);
+ return error;
+}
+
+/**
+ * megasas_mgmt_ioctl - char node ioctl entry point
+ */
+static long
+megasas_mgmt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case MEGASAS_IOC_FIRMWARE:
+ return megasas_mgmt_ioctl_fw(file, arg);
+
+ case MEGASAS_IOC_GET_AEN:
+ return megasas_mgmt_ioctl_aen(file, arg);
+ }
+
+ return -ENOTTY;
+}
+
+#ifdef CONFIG_COMPAT
+static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg)
+{
+ struct compat_megasas_iocpacket __user *cioc =
+ (struct compat_megasas_iocpacket __user *)arg;
+ struct megasas_iocpacket __user *ioc =
+ compat_alloc_user_space(sizeof(struct megasas_iocpacket));
+ int i;
+ int error = 0;
+ compat_uptr_t ptr;
+
+ if (clear_user(ioc, sizeof(*ioc)))
+ return -EFAULT;
+
+ if (copy_in_user(&ioc->host_no, &cioc->host_no, sizeof(u16)) ||
+ copy_in_user(&ioc->sgl_off, &cioc->sgl_off, sizeof(u32)) ||
+ copy_in_user(&ioc->sense_off, &cioc->sense_off, sizeof(u32)) ||
+ copy_in_user(&ioc->sense_len, &cioc->sense_len, sizeof(u32)) ||
+ copy_in_user(ioc->frame.raw, cioc->frame.raw, 128) ||
+ copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32)))
+ return -EFAULT;
+
+ /*
+ * The sense_ptr is used in megasas_mgmt_fw_ioctl only when
+ * sense_len is not null, so prepare the 64bit value under
+ * the same condition.
+ */
+ if (ioc->sense_len) {
+ void __user **sense_ioc_ptr =
+ (void __user **)(ioc->frame.raw + ioc->sense_off);
+ compat_uptr_t *sense_cioc_ptr =
+ (compat_uptr_t *)(cioc->frame.raw + cioc->sense_off);
+ if (get_user(ptr, sense_cioc_ptr) ||
+ put_user(compat_ptr(ptr), sense_ioc_ptr))
+ return -EFAULT;
+ }
+
+ for (i = 0; i < MAX_IOCTL_SGE; i++) {
+ if (get_user(ptr, &cioc->sgl[i].iov_base) ||
+ put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) ||
+ copy_in_user(&ioc->sgl[i].iov_len,
+ &cioc->sgl[i].iov_len, sizeof(compat_size_t)))
+ return -EFAULT;
+ }
+
+ error = megasas_mgmt_ioctl_fw(file, (unsigned long)ioc);
+
+ if (copy_in_user(&cioc->frame.hdr.cmd_status,
+ &ioc->frame.hdr.cmd_status, sizeof(u8))) {
+ printk(KERN_DEBUG "megasas: error copy_in_user cmd_status\n");
+ return -EFAULT;
+ }
+ return error;
+}
+
+static long
+megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ switch (cmd) {
+ case MEGASAS_IOC_FIRMWARE32:
+ return megasas_mgmt_compat_ioctl_fw(file, arg);
+ case MEGASAS_IOC_GET_AEN:
+ return megasas_mgmt_ioctl_aen(file, arg);
+ }
+
+ return -ENOTTY;
+}
+#endif
+
+/*
+ * File operations structure for management interface
+ */
+static const struct file_operations megasas_mgmt_fops = {
+ .owner = THIS_MODULE,
+ .open = megasas_mgmt_open,
+ .fasync = megasas_mgmt_fasync,
+ .unlocked_ioctl = megasas_mgmt_ioctl,
+ .poll = megasas_mgmt_poll,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = megasas_mgmt_compat_ioctl,
+#endif
+};
+
+/*
+ * PCI hotplug support registration structure
+ */
+static struct pci_driver megasas_pci_driver = {
+
+ .name = "megaraid_sas",
+ .id_table = megasas_pci_table,
+ .probe = megasas_probe_one,
+ .remove = __devexit_p(megasas_detach_one),
+ .suspend = megasas_suspend,
+ .resume = megasas_resume,
+ .shutdown = megasas_shutdown,
+};
+
+/*
+ * Sysfs driver attributes
+ */
+static ssize_t megasas_sysfs_show_version(struct device_driver *dd, char *buf)
+{
+ return snprintf(buf, strlen(MEGASAS_VERSION) + 2, "%s\n",
+ MEGASAS_VERSION);
+}
+
+static DRIVER_ATTR(version, S_IRUGO, megasas_sysfs_show_version, NULL);
+
+static ssize_t
+megasas_sysfs_show_release_date(struct device_driver *dd, char *buf)
+{
+ return snprintf(buf, strlen(MEGASAS_RELDATE) + 2, "%s\n",
+ MEGASAS_RELDATE);
+}
+
+static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date,
+ NULL);
+
+static ssize_t
+megasas_sysfs_show_support_poll_for_event(struct device_driver *dd, char *buf)
+{
+ return sprintf(buf, "%u\n", support_poll_for_event);
+}
+
+static DRIVER_ATTR(support_poll_for_event, S_IRUGO,
+ megasas_sysfs_show_support_poll_for_event, NULL);
+
+static ssize_t
+megasas_sysfs_show_dbg_lvl(struct device_driver *dd, char *buf)
+{
+ return sprintf(buf, "%u\n", megasas_dbg_lvl);
+}
+
+static ssize_t
+megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t count)
+{
+ int retval = count;
+ if(sscanf(buf,"%u",&megasas_dbg_lvl)<1){
+ printk(KERN_ERR "megasas: could not set dbg_lvl\n");
+ retval = -EINVAL;
+ }
+ return retval;
+}
+
+static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
+ megasas_sysfs_set_dbg_lvl);
+
+static ssize_t
+megasas_sysfs_show_poll_mode_io(struct device_driver *dd, char *buf)
+{
+ return sprintf(buf, "%u\n", poll_mode_io);
+}
+
+static ssize_t
+megasas_sysfs_set_poll_mode_io(struct device_driver *dd,
+ const char *buf, size_t count)
+{
+ int retval = count;
+ int tmp = poll_mode_io;
+ int i;
+ struct megasas_instance *instance;
+
+ if (sscanf(buf, "%u", &poll_mode_io) < 1) {
+ printk(KERN_ERR "megasas: could not set poll_mode_io\n");
+ retval = -EINVAL;
+ }
+
+ /*
+ * Check if poll_mode_io is already set or is same as previous value
+ */
+ if ((tmp && poll_mode_io) || (tmp == poll_mode_io))
+ goto out;
+
+ if (poll_mode_io) {
+ /*
+ * Start timers for all adapters
+ */
+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
+ instance = megasas_mgmt_info.instance[i];
+ if (instance) {
+ megasas_start_timer(instance,
+ &instance->io_completion_timer,
+ megasas_io_completion_timer,
+ MEGASAS_COMPLETION_TIMER_INTERVAL);
+ }
+ }
+ } else {
+ /*
+ * Delete timers for all adapters
+ */
+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
+ instance = megasas_mgmt_info.instance[i];
+ if (instance)
+ del_timer_sync(&instance->io_completion_timer);
+ }
+ }
+
+out:
+ return retval;
+}
+
+static void
+megasas_aen_polling(struct work_struct *work)
+{
+ struct megasas_aen_event *ev =
+ container_of(work, struct megasas_aen_event, hotplug_work);
+ struct megasas_instance *instance = ev->instance;
+ union megasas_evt_class_locale class_locale;
+ struct Scsi_Host *host;
+ struct scsi_device *sdev1;
+ u16 pd_index = 0;
+ u16 ld_index = 0;
+ int i, j, doscan = 0;
+ u32 seq_num;
+ int error;
+
+ if (!instance) {
+ printk(KERN_ERR "invalid instance!\n");
+ kfree(ev);
+ return;
+ }
+ instance->ev = NULL;
+ host = instance->host;
+ if (instance->evt_detail) {
+
+ switch (instance->evt_detail->code) {
+ case MR_EVT_PD_INSERTED:
+ if (megasas_get_pd_list(instance) == 0) {
+ for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+
+ pd_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 =
+ scsi_device_lookup(host, i, j, 0);
+
+ if (instance->pd_list[pd_index].driveState
+ == MR_PD_STATE_SYSTEM) {
+ if (!sdev1) {
+ scsi_add_device(host, i, j, 0);
+ }
+
+ if (sdev1)
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ doscan = 0;
+ break;
+
+ case MR_EVT_PD_REMOVED:
+ if (megasas_get_pd_list(instance) == 0) {
+ megasas_get_pd_list(instance);
+ for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+
+ pd_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 =
+ scsi_device_lookup(host, i, j, 0);
+
+ if (instance->pd_list[pd_index].driveState
+ == MR_PD_STATE_SYSTEM) {
+ if (sdev1) {
+ scsi_device_put(sdev1);
+ }
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ }
+ doscan = 0;
+ break;
+
+ case MR_EVT_LD_OFFLINE:
+ case MR_EVT_LD_DELETED:
+ megasas_get_ld_list(instance);
+ for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+
+ ld_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 = scsi_device_lookup(host,
+ i + MEGASAS_MAX_LD_CHANNELS,
+ j,
+ 0);
+
+ if (instance->ld_ids[ld_index] != 0xff) {
+ if (sdev1) {
+ scsi_device_put(sdev1);
+ }
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ doscan = 0;
+ break;
+ case MR_EVT_LD_CREATED:
+ megasas_get_ld_list(instance);
+ for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
+ for (j = 0;
+ j < MEGASAS_MAX_DEV_PER_CHANNEL;
+ j++) {
+ ld_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 = scsi_device_lookup(host,
+ i+MEGASAS_MAX_LD_CHANNELS,
+ j, 0);
+
+ if (instance->ld_ids[ld_index] !=
+ 0xff) {
+ if (!sdev1) {
+ scsi_add_device(host,
+ i + 2,
+ j, 0);
+ }
+ }
+ if (sdev1) {
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ doscan = 0;
+ break;
+ case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
+ case MR_EVT_FOREIGN_CFG_IMPORTED:
+ doscan = 1;
+ break;
+ default:
+ doscan = 0;
+ break;
+ }
+ } else {
+ printk(KERN_ERR "invalid evt_detail!\n");
+ kfree(ev);
+ return;
+ }
+
+ if (doscan) {
+ printk(KERN_INFO "scanning ...\n");
+ megasas_get_pd_list(instance);
+ for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
+ for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
+ pd_index = i*MEGASAS_MAX_DEV_PER_CHANNEL + j;
+ sdev1 = scsi_device_lookup(host, i, j, 0);
+ if (instance->pd_list[pd_index].driveState ==
+ MR_PD_STATE_SYSTEM) {
+ if (!sdev1) {
+ scsi_add_device(host, i, j, 0);
+ }
+ if (sdev1)
+ scsi_device_put(sdev1);
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+
+ megasas_get_ld_list(instance);
+ for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
+ for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
+ ld_index =
+ (i * MEGASAS_MAX_DEV_PER_CHANNEL) + j;
+
+ sdev1 = scsi_device_lookup(host,
+ i+MEGASAS_MAX_LD_CHANNELS, j, 0);
+ if (instance->ld_ids[ld_index] != 0xff) {
+ if (!sdev1) {
+ scsi_add_device(host,
+ i+2,
+ j, 0);
+ } else {
+ scsi_device_put(sdev1);
+ }
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ }
+
+ if ( instance->aen_cmd != NULL ) {
+ kfree(ev);
+ return ;
+ }
+
+ seq_num = instance->evt_detail->seq_num + 1;
+
+ /* Register AEN with FW for latest sequence number plus 1 */
+ class_locale.members.reserved = 0;
+ class_locale.members.locale = MR_EVT_LOCALE_ALL;
+ class_locale.members.class = MR_EVT_CLASS_DEBUG;
+ mutex_lock(&instance->aen_mutex);
+ error = megasas_register_aen(instance, seq_num,
+ class_locale.word);
+ mutex_unlock(&instance->aen_mutex);
+
+ if (error)
+ printk(KERN_ERR "register aen failed error %x\n", error);
+
+ kfree(ev);
+}
+
+
+static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUSR,
+ megasas_sysfs_show_poll_mode_io,
+ megasas_sysfs_set_poll_mode_io);
+
+/**
+ * megasas_init - Driver load entry point
+ */
+static int __init megasas_init(void)
+{
+ int rval;
+
+ /*
+ * Announce driver version and other information
+ */
+ printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
+ MEGASAS_EXT_VERSION);
+
+ support_poll_for_event = 2;
+
+ memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info));
+
+ /*
+ * Register character device node
+ */
+ rval = register_chrdev(0, "megaraid_sas_ioctl", &megasas_mgmt_fops);
+
+ if (rval < 0) {
+ printk(KERN_DEBUG "megasas: failed to open device node\n");
+ return rval;
+ }
+
+ megasas_mgmt_majorno = rval;
+
+ /*
+ * Register ourselves as PCI hotplug module
+ */
+ rval = pci_register_driver(&megasas_pci_driver);
+
+ if (rval) {
+ printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n");
+ goto err_pcidrv;
+ }
+
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_version);
+ if (rval)
+ goto err_dcf_attr_ver;
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_release_date);
+ if (rval)
+ goto err_dcf_rel_date;
+
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_support_poll_for_event);
+ if (rval)
+ goto err_dcf_support_poll_for_event;
+
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_dbg_lvl);
+ if (rval)
+ goto err_dcf_dbg_lvl;
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_poll_mode_io);
+ if (rval)
+ goto err_dcf_poll_mode_io;
+
+ return rval;
+
+err_dcf_poll_mode_io:
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_dbg_lvl);
+err_dcf_dbg_lvl:
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_support_poll_for_event);
+
+err_dcf_support_poll_for_event:
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_release_date);
+
+err_dcf_rel_date:
+ driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
+err_dcf_attr_ver:
+ pci_unregister_driver(&megasas_pci_driver);
+err_pcidrv:
+ unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
+ return rval;
+}
+
+/**
+ * megasas_exit - Driver unload entry point
+ */
+static void __exit megasas_exit(void)
+{
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_poll_mode_io);
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_dbg_lvl);
+ driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_release_date);
+ driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
+
+ pci_unregister_driver(&megasas_pci_driver);
+ unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
+}
+
+module_init(megasas_init);
+module_exit(megasas_exit);
--
1.7.10.rc1
From: adam radford <aradford@gmail.com>
Date: Tue, 21 Dec 2010 10:17:40 -0800
Subject: [SCSI] megaraid_sas: Add MSI-X support and msix_disable module parameter
commit 80d9da98b4034edd31f6bacdb96c7489c4460173 upstream.
This patch adds MSI-X support and 'msix_disable' module parameter to
the megaraid_sas driver.
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas.h | 3 +++
drivers/scsi/megaraid/megaraid_sas_base.c | 41 ++++++++++++++++++++++++-----
2 files changed, 37 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index a231aa811e56..4a6253d92b7e 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1319,6 +1319,9 @@ struct megasas_instance {
struct timer_list io_completion_timer;
struct list_head internal_reset_pending_q;
+
+ u8 msi_flag;
+ struct msix_entry msixentry;
};
enum {
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index a18ae3cba87e..e5738869272c 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -56,6 +56,10 @@ module_param_named(poll_mode_io, poll_mode_io, int, 0);
MODULE_PARM_DESC(poll_mode_io,
"Complete cmds from IO path, (default=0)");
+static int msix_disable;
+module_param(msix_disable, int, S_IRUGO);
+MODULE_PARM_DESC(msix_disable, "Disable MSI-X interrupt handling. Default: 0");
+
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGASAS_VERSION);
MODULE_AUTHOR("megaraidlinux@lsi.com");
@@ -3676,10 +3680,20 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (megasas_init_mfi(instance))
goto fail_init_mfi;
+ /* Try to enable MSI-X */
+ if ((instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078R) &&
+ (instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078DE) &&
+ (instance->pdev->device != PCI_DEVICE_ID_LSI_VERDE_ZCR) &&
+ !msix_disable && !pci_enable_msix(instance->pdev,
+ &instance->msixentry, 1))
+ instance->msi_flag = 1;
+
/*
* Register IRQ
*/
- if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED, "megasas", instance)) {
+ if (request_irq(instance->msi_flag ? instance->msixentry.vector :
+ pdev->irq, megasas_isr,
+ IRQF_SHARED, "megasas", instance)) {
printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
goto fail_irq;
}
@@ -3724,8 +3738,10 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_drvdata(pdev, NULL);
instance->instancet->disable_intr(instance->reg_set);
- free_irq(instance->pdev->irq, instance);
-
+ free_irq(instance->msi_flag ? instance->msixentry.vector :
+ instance->pdev->irq, instance);
+ if (instance->msi_flag)
+ pci_disable_msix(instance->pdev);
megasas_release_mfi(instance);
fail_irq:
@@ -3864,7 +3880,10 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state)
pci_set_drvdata(instance->pdev, instance);
instance->instancet->disable_intr(instance->reg_set);
- free_irq(instance->pdev->irq, instance);
+ free_irq(instance->msi_flag ? instance->msixentry.vector :
+ instance->pdev->irq, instance);
+ if (instance->msi_flag)
+ pci_disable_msix(instance->pdev);
pci_save_state(pdev);
pci_disable_device(pdev);
@@ -3927,11 +3946,16 @@ megasas_resume(struct pci_dev *pdev)
tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
(unsigned long)instance);
+ /* Now re-enable MSI-X */
+ if (instance->msi_flag)
+ pci_enable_msix(instance->pdev, &instance->msixentry, 1);
+
/*
* Register IRQ
*/
- if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED,
- "megasas", instance)) {
+ if (request_irq(instance->msi_flag ? instance->msixentry.vector :
+ pdev->irq, megasas_isr,
+ IRQF_SHARED, "megasas", instance)) {
printk(KERN_ERR "megasas: Failed to register IRQ\n");
goto fail_irq;
}
@@ -4029,7 +4053,10 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev)
instance->instancet->disable_intr(instance->reg_set);
- free_irq(instance->pdev->irq, instance);
+ free_irq(instance->msi_flag ? instance->msixentry.vector :
+ instance->pdev->irq, instance);
+ if (instance->msi_flag)
+ pci_disable_msix(instance->pdev);
megasas_release_mfi(instance);
--
1.7.10.rc1
From: Noriyuki Fujii <n-fujii@np.css.fujitsu.com>
Date: Fri, 20 Nov 2009 16:27:20 +0900
Subject: [SCSI] megaraid_sas: make driver PCI legacy I/O port free driver
commit aeab3fd7b865bc4086a80a83cfdd67dded3b41a0 upstream.
On the large servers, I/O port resource may not be assigned to all
the PCI devices since it is limited (to 64KB on Intel Architecture[1])
and it may also be fragmented (I/O base register of PCI-to-PCI bridge
will usually be aligned to a 4KB boundary[2]).
If no I/O port resource is assigned to devices, those devices do not
work.
[1] Some machines support 64KB I/O port space per PCI segment.
[2] Some P2P bridges support optional 1KB aligned I/O base.
Therefore, I made a patch for MegaRAID SAS driver to make PCI legacy
I/O port free. I have also tested the patch and it had no problem.
The way to make PCI legacy I/O port free is the same as Fusion-MPT
driver's and it has been merged into 2.6.30.4.
This has already been fixed in e1000 and lpfc.
As a result of the above, the driver can handle its device even when
there are a huge number of PCI devices being used on the system and no
I/O port region assigned to the device.
Signed-off-by: Noriyuki Fujii <n-fujii@np.css.fujitsu.com>
Acked-by: "Yang, Bo" <Bo.Yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index e5738869272c..58442f4b3ae1 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3088,7 +3088,9 @@ static int megasas_init_mfi(struct megasas_instance *instance)
instance->base_addr = pci_resource_start(instance->pdev, 0);
}
- if (pci_request_regions(instance->pdev, "megasas: LSI")) {
+ if (pci_request_selected_regions(instance->pdev,
+ pci_select_bars(instance->pdev, IORESOURCE_MEM),
+ "megasas: LSI")) {
printk(KERN_DEBUG "megasas: IO memory region busy!\n");
return -EBUSY;
}
@@ -3249,7 +3251,8 @@ static int megasas_init_mfi(struct megasas_instance *instance)
iounmap(instance->reg_set);
fail_ioremap:
- pci_release_regions(instance->pdev);
+ pci_release_selected_regions(instance->pdev,
+ pci_select_bars(instance->pdev, IORESOURCE_MEM));
return -EINVAL;
}
@@ -3269,7 +3272,8 @@ static void megasas_release_mfi(struct megasas_instance *instance)
iounmap(instance->reg_set);
- pci_release_regions(instance->pdev);
+ pci_release_selected_regions(instance->pdev,
+ pci_select_bars(instance->pdev, IORESOURCE_MEM));
}
/**
@@ -3579,7 +3583,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
/*
* PCI prepping: enable device set bus mastering and dma mask
*/
- rval = pci_enable_device(pdev);
+ rval = pci_enable_device_mem(pdev);
if (rval) {
return rval;
@@ -3913,7 +3917,7 @@ megasas_resume(struct pci_dev *pdev)
/*
* PCI prepping: enable device set bus mastering and dma mask
*/
- rval = pci_enable_device(pdev);
+ rval = pci_enable_device_mem(pdev);
if (rval) {
printk(KERN_ERR "megasas: Enable device failed\n");
--
1.7.10.rc1
From: adam radford <aradford@gmail.com>
Date: Tue, 14 Dec 2010 18:56:07 -0800
Subject: [SCSI] megaraid_sas: Use lowest memory bar for SR-IOV VF support
commit b6d5d8808b4c563a56414a4c4c6d652b5f87c088 upstream.
The following patch modifies the megaraid_sas driver to select the
lowest memory bar available so the driver will work in SR-IOV VF
environments where the memory bar mapping changes.
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas.h | 1 +
drivers/scsi/megaraid/megaraid_sas_base.c | 27 +++++++++------------------
2 files changed, 10 insertions(+), 18 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 4a6253d92b7e..83c6e3aa6f43 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1322,6 +1322,7 @@ struct megasas_instance {
u8 msi_flag;
struct msix_entry msixentry;
+ unsigned long bar;
};
enum {
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 58442f4b3ae1..e019480cd64b 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3076,21 +3076,14 @@ static int megasas_init_mfi(struct megasas_instance *instance)
u32 tmp_sectors;
struct megasas_register_set __iomem *reg_set;
struct megasas_ctrl_info *ctrl_info;
- /*
- * Map the message registers
- */
- if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
- instance->base_addr = pci_resource_start(instance->pdev, 1);
- } else {
- instance->base_addr = pci_resource_start(instance->pdev, 0);
- }
+ unsigned long bar_list;
- if (pci_request_selected_regions(instance->pdev,
- pci_select_bars(instance->pdev, IORESOURCE_MEM),
- "megasas: LSI")) {
+ /* Find first memory bar */
+ bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM);
+ instance->bar = find_first_bit(&bar_list, sizeof(unsigned long));
+ instance->base_addr = pci_resource_start(instance->pdev, instance->bar);
+ if (pci_request_selected_regions(instance->pdev, instance->bar,
+ "megasas: LSI")) {
printk(KERN_DEBUG "megasas: IO memory region busy!\n");
return -EBUSY;
}
@@ -3251,8 +3244,7 @@ static int megasas_init_mfi(struct megasas_instance *instance)
iounmap(instance->reg_set);
fail_ioremap:
- pci_release_selected_regions(instance->pdev,
- pci_select_bars(instance->pdev, IORESOURCE_MEM));
+ pci_release_selected_regions(instance->pdev, instance->bar);
return -EINVAL;
}
@@ -3272,8 +3264,7 @@ static void megasas_release_mfi(struct megasas_instance *instance)
iounmap(instance->reg_set);
- pci_release_selected_regions(instance->pdev,
- pci_select_bars(instance->pdev, IORESOURCE_MEM));
+ pci_release_selected_regions(instance->pdev, instance->bar);
}
/**
--
1.7.10.rc1
From: adam radford <aradford@gmail.com>
Date: Tue, 21 Dec 2010 10:23:23 -0800
Subject: [SCSI] megaraid_sas: Add struct megasas_instance_template changes
commit cd50ba8ede5cd3c4606a8e5d163913da5ff36ad7 upstream.
The following patch adds struct megasas_instance_template changes to
the megaraid_sas driver, and changes all code to use the new instance
entries:
irqreturn_t (*service_isr )(int irq, void *devp);
void (*tasklet)(unsigned long);
u32 (*init_adapter)(struct megasas_instance *);
u32 (*build_and_issue_cmd) (struct megasas_instance *, struct scsi_cmnd *);
void (*issue_dcmd) (struct megasas_instance *instance,
struct megasas_cmd *cmd);
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/megaraid_sas.h | 7 +
drivers/scsi/megaraid/megaraid_sas_base.c | 278 ++++++++++++++++++-----------
2 files changed, 180 insertions(+), 105 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 83c6e3aa6f43..0663f2efda12 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1348,6 +1348,13 @@ struct megasas_instance_template {
struct megasas_register_set __iomem *);
int (*check_reset)(struct megasas_instance *, \
struct megasas_register_set __iomem *);
+ irqreturn_t (*service_isr)(int irq, void *devp);
+ void (*tasklet)(unsigned long);
+ u32 (*init_adapter)(struct megasas_instance *);
+ u32 (*build_and_issue_cmd) (struct megasas_instance *,
+ struct scsi_cmnd *);
+ void (*issue_dcmd) (struct megasas_instance *instance,
+ struct megasas_cmd *cmd);
};
#define MEGASAS_IS_LOGICAL(scp) \
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index e019480cd64b..7f2b199b82c2 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -114,6 +114,20 @@ spinlock_t poll_aen_lock;
static void
megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
u8 alt_status);
+static irqreturn_t megasas_isr(int irq, void *devp);
+static u32
+megasas_init_adapter_mfi(struct megasas_instance *instance);
+u32
+megasas_build_and_issue_cmd(struct megasas_instance *instance,
+ struct scsi_cmnd *scmd);
+static void megasas_complete_cmd_dpc(unsigned long instance_addr);
+
+void
+megasas_issue_dcmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
+{
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr, 0, instance->reg_set);
+}
/**
* megasas_get_cmd - Get a command from the free pool
@@ -317,6 +331,11 @@ static struct megasas_instance_template megasas_instance_template_xscale = {
.read_fw_status_reg = megasas_read_fw_status_reg_xscale,
.adp_reset = megasas_adp_reset_xscale,
.check_reset = megasas_check_reset_xscale,
+ .service_isr = megasas_isr,
+ .tasklet = megasas_complete_cmd_dpc,
+ .init_adapter = megasas_init_adapter_mfi,
+ .build_and_issue_cmd = megasas_build_and_issue_cmd,
+ .issue_dcmd = megasas_issue_dcmd,
};
/**
@@ -443,6 +462,11 @@ static struct megasas_instance_template megasas_instance_template_ppc = {
.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
.adp_reset = megasas_adp_reset_ppc,
.check_reset = megasas_check_reset_ppc,
+ .service_isr = megasas_isr,
+ .tasklet = megasas_complete_cmd_dpc,
+ .init_adapter = megasas_init_adapter_mfi,
+ .build_and_issue_cmd = megasas_build_and_issue_cmd,
+ .issue_dcmd = megasas_issue_dcmd,
};
/**
@@ -564,6 +588,11 @@ static struct megasas_instance_template megasas_instance_template_skinny = {
.read_fw_status_reg = megasas_read_fw_status_reg_skinny,
.adp_reset = megasas_adp_reset_skinny,
.check_reset = megasas_check_reset_skinny,
+ .service_isr = megasas_isr,
+ .tasklet = megasas_complete_cmd_dpc,
+ .init_adapter = megasas_init_adapter_mfi,
+ .build_and_issue_cmd = megasas_build_and_issue_cmd,
+ .issue_dcmd = megasas_issue_dcmd,
};
@@ -734,6 +763,11 @@ static struct megasas_instance_template megasas_instance_template_gen2 = {
.read_fw_status_reg = megasas_read_fw_status_reg_gen2,
.adp_reset = megasas_adp_reset_gen2,
.check_reset = megasas_check_reset_gen2,
+ .service_isr = megasas_isr,
+ .tasklet = megasas_complete_cmd_dpc,
+ .init_adapter = megasas_init_adapter_mfi,
+ .build_and_issue_cmd = megasas_build_and_issue_cmd,
+ .issue_dcmd = megasas_issue_dcmd,
};
/**
@@ -1305,6 +1339,51 @@ megasas_dump_pending_frames(struct megasas_instance *instance)
printk(KERN_ERR "megasas[%d]: Dumping Done.\n\n",instance->host->host_no);
}
+u32
+megasas_build_and_issue_cmd(struct megasas_instance *instance,
+ struct scsi_cmnd *scmd)
+{
+ struct megasas_cmd *cmd;
+ u32 frame_count;
+
+ cmd = megasas_get_cmd(instance);
+ if (!cmd)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /*
+ * Logical drive command
+ */
+ if (megasas_is_ldio(scmd))
+ frame_count = megasas_build_ldio(instance, scmd, cmd);
+ else
+ frame_count = megasas_build_dcdb(instance, scmd, cmd);
+
+ if (!frame_count)
+ goto out_return_cmd;
+
+ cmd->scmd = scmd;
+ scmd->SCp.ptr = (char *)cmd;
+
+ /*
+ * Issue the command to the FW
+ */
+ atomic_inc(&instance->fw_outstanding);
+
+ instance->instancet->fire_cmd(instance, cmd->frame_phys_addr,
+ cmd->frame_count-1, instance->reg_set);
+ /*
+ * Check if we have pend cmds to be completed
+ */
+ if (poll_mode_io && atomic_read(&instance->fw_outstanding))
+ tasklet_schedule(&instance->isr_tasklet);
+
+ return 0;
+out_return_cmd:
+ megasas_return_cmd(instance, cmd);
+ return 1;
+}
+
+
/**
* megasas_queue_command - Queue entry point
* @scmd: SCSI command to be queued
@@ -1313,8 +1392,6 @@ megasas_dump_pending_frames(struct megasas_instance *instance)
static int
megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
{
- u32 frame_count;
- struct megasas_cmd *cmd;
struct megasas_instance *instance;
unsigned long flags;
@@ -1353,42 +1430,13 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
break;
}
- cmd = megasas_get_cmd(instance);
- if (!cmd)
+ if (instance->instancet->build_and_issue_cmd(instance, scmd)) {
+ printk(KERN_ERR "megasas: Err returned from build_and_issue_cmd\n");
return SCSI_MLQUEUE_HOST_BUSY;
-
- /*
- * Logical drive command
- */
- if (megasas_is_ldio(scmd))
- frame_count = megasas_build_ldio(instance, scmd, cmd);
- else
- frame_count = megasas_build_dcdb(instance, scmd, cmd);
-
- if (!frame_count)
- goto out_return_cmd;
-
- cmd->scmd = scmd;
- scmd->SCp.ptr = (char *)cmd;
-
- /*
- * Issue the command to the FW
- */
- atomic_inc(&instance->fw_outstanding);
-
- instance->instancet->fire_cmd(instance, cmd->frame_phys_addr,
- cmd->frame_count-1, instance->reg_set);
- /*
- * Check if we have pend cmds to be completed
- */
- if (poll_mode_io && atomic_read(&instance->fw_outstanding))
- tasklet_schedule(&instance->isr_tasklet);
-
+ }
return 0;
- out_return_cmd:
- megasas_return_cmd(instance, cmd);
out_done:
done(scmd);
return 0;
@@ -3061,69 +3109,15 @@ megasas_io_completion_timer(unsigned long instance_addr)
jiffies + MEGASAS_COMPLETION_TIMER_INTERVAL);
}
-/**
- * megasas_init_mfi - Initializes the FW
- * @instance: Adapter soft state
- *
- * This is the main function for initializing MFI firmware.
- */
-static int megasas_init_mfi(struct megasas_instance *instance)
+static u32
+megasas_init_adapter_mfi(struct megasas_instance *instance)
{
+ struct megasas_register_set __iomem *reg_set;
u32 context_sz;
u32 reply_q_sz;
- u32 max_sectors_1;
- u32 max_sectors_2;
- u32 tmp_sectors;
- struct megasas_register_set __iomem *reg_set;
- struct megasas_ctrl_info *ctrl_info;
- unsigned long bar_list;
-
- /* Find first memory bar */
- bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM);
- instance->bar = find_first_bit(&bar_list, sizeof(unsigned long));
- instance->base_addr = pci_resource_start(instance->pdev, instance->bar);
- if (pci_request_selected_regions(instance->pdev, instance->bar,
- "megasas: LSI")) {
- printk(KERN_DEBUG "megasas: IO memory region busy!\n");
- return -EBUSY;
- }
-
- instance->reg_set = ioremap_nocache(instance->base_addr, 8192);
-
- if (!instance->reg_set) {
- printk(KERN_DEBUG "megasas: Failed to map IO mem\n");
- goto fail_ioremap;
- }
reg_set = instance->reg_set;
- switch(instance->pdev->device)
- {
- case PCI_DEVICE_ID_LSI_SAS1078R:
- case PCI_DEVICE_ID_LSI_SAS1078DE:
- instance->instancet = &megasas_instance_template_ppc;
- break;
- case PCI_DEVICE_ID_LSI_SAS1078GEN2:
- case PCI_DEVICE_ID_LSI_SAS0079GEN2:
- instance->instancet = &megasas_instance_template_gen2;
- break;
- case PCI_DEVICE_ID_LSI_SAS0073SKINNY:
- case PCI_DEVICE_ID_LSI_SAS0071SKINNY:
- instance->instancet = &megasas_instance_template_skinny;
- break;
- case PCI_DEVICE_ID_LSI_SAS1064R:
- case PCI_DEVICE_ID_DELL_PERC5:
- default:
- instance->instancet = &megasas_instance_template_xscale;
- break;
- }
-
- /*
- * We expect the FW state to be READY
- */
- if (megasas_transition_to_ready(instance))
- goto fail_ready_state;
-
/*
* Get various operational parameters from status register
*/
@@ -3177,6 +3171,87 @@ static int megasas_init_mfi(struct megasas_instance *instance)
if (instance->fw_support_ieee)
instance->flag_ieee = 1;
+ return 0;
+
+fail_fw_init:
+
+ pci_free_consistent(instance->pdev, reply_q_sz,
+ instance->reply_queue, instance->reply_queue_h);
+fail_reply_queue:
+ megasas_free_cmds(instance);
+
+fail_alloc_cmds:
+ iounmap(instance->reg_set);
+ return 1;
+}
+
+/**
+ * megasas_init_fw - Initializes the FW
+ * @instance: Adapter soft state
+ *
+ * This is the main function for initializing firmware
+ */
+
+static int megasas_init_fw(struct megasas_instance *instance)
+{
+ u32 max_sectors_1;
+ u32 max_sectors_2;
+ u32 tmp_sectors;
+ struct megasas_register_set __iomem *reg_set;
+ struct megasas_ctrl_info *ctrl_info;
+ unsigned long bar_list;
+
+ /* Find first memory bar */
+ bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM);
+ instance->bar = find_first_bit(&bar_list, sizeof(unsigned long));
+ instance->base_addr = pci_resource_start(instance->pdev, instance->bar);
+ if (pci_request_selected_regions(instance->pdev, instance->bar,
+ "megasas: LSI")) {
+ printk(KERN_DEBUG "megasas: IO memory region busy!\n");
+ return -EBUSY;
+ }
+
+ instance->reg_set = ioremap_nocache(instance->base_addr, 8192);
+
+ if (!instance->reg_set) {
+ printk(KERN_DEBUG "megasas: Failed to map IO mem\n");
+ goto fail_ioremap;
+ }
+
+ reg_set = instance->reg_set;
+
+ switch (instance->pdev->device) {
+ case PCI_DEVICE_ID_LSI_SAS1078R:
+ case PCI_DEVICE_ID_LSI_SAS1078DE:
+ instance->instancet = &megasas_instance_template_ppc;
+ break;
+ case PCI_DEVICE_ID_LSI_SAS1078GEN2:
+ case PCI_DEVICE_ID_LSI_SAS0079GEN2:
+ instance->instancet = &megasas_instance_template_gen2;
+ break;
+ case PCI_DEVICE_ID_LSI_SAS0073SKINNY:
+ case PCI_DEVICE_ID_LSI_SAS0071SKINNY:
+ instance->instancet = &megasas_instance_template_skinny;
+ break;
+ case PCI_DEVICE_ID_LSI_SAS1064R:
+ case PCI_DEVICE_ID_DELL_PERC5:
+ default:
+ instance->instancet = &megasas_instance_template_xscale;
+ break;
+ }
+
+ /*
+ * We expect the FW state to be READY
+ */
+ if (megasas_transition_to_ready(instance))
+ goto fail_ready_state;
+
+ /* Get operational params, sge flags, send init cmd to controller */
+ if (instance->instancet->init_adapter(instance))
+ return -ENODEV;
+
+ printk(KERN_ERR "megasas: INIT adapter done\n");
+
/** for passthrough
* the following function will get the PD LIST.
*/
@@ -3232,15 +3307,7 @@ static int megasas_init_mfi(struct megasas_instance *instance)
MEGASAS_COMPLETION_TIMER_INTERVAL);
return 0;
- fail_fw_init:
-
- pci_free_consistent(instance->pdev, reply_q_sz,
- instance->reply_queue, instance->reply_queue_h);
- fail_reply_queue:
- megasas_free_cmds(instance);
-
- fail_alloc_cmds:
- fail_ready_state:
+fail_ready_state:
iounmap(instance->reg_set);
fail_ioremap:
@@ -3672,7 +3739,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
/*
* Initialize MFI Firmware
*/
- if (megasas_init_mfi(instance))
+ if (megasas_init_fw(instance))
goto fail_init_mfi;
/* Try to enable MSI-X */
@@ -3687,7 +3754,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
* Register IRQ
*/
if (request_irq(instance->msi_flag ? instance->msixentry.vector :
- pdev->irq, megasas_isr,
+ pdev->irq, instance->instancet->service_isr,
IRQF_SHARED, "megasas", instance)) {
printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
goto fail_irq;
@@ -3737,7 +3804,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
instance->pdev->irq, instance);
if (instance->msi_flag)
pci_disable_msix(instance->pdev);
- megasas_release_mfi(instance);
fail_irq:
fail_init_mfi:
@@ -3747,9 +3813,11 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
instance->evt_detail,
instance->evt_detail_h);
- if (instance->producer)
+ if (instance->producer) {
pci_free_consistent(pdev, sizeof(u32), instance->producer,
instance->producer_h);
+ megasas_release_mfi(instance);
+ }
if (instance->consumer)
pci_free_consistent(pdev, sizeof(u32), instance->consumer,
instance->consumer_h);
@@ -3949,7 +4017,7 @@ megasas_resume(struct pci_dev *pdev)
* Register IRQ
*/
if (request_irq(instance->msi_flag ? instance->msixentry.vector :
- pdev->irq, megasas_isr,
+ pdev->irq, instance->instancet->service_isr,
IRQF_SHARED, "megasas", instance)) {
printk(KERN_ERR "megasas: Failed to register IRQ\n");
goto fail_irq;
--
1.7.10.rc1
From: adam radford <aradford@gmail.com>
Date: Tue, 21 Dec 2010 13:34:31 -0800
Subject: [SCSI] megaraid_sas: Add 9565/9285 specific code
commit 9c915a8c99bce637226aa09cb05fc18486b229cb upstream.
This patch adds MegaRAID 9265/9285 (Device id 0x5b) specific code
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
---
drivers/scsi/megaraid/Makefile | 3 +-
drivers/scsi/megaraid/megaraid_sas.h | 32 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 362 +++--
drivers/scsi/megaraid/megaraid_sas_fp.c | 516 ++++++
drivers/scsi/megaraid/megaraid_sas_fusion.c | 2248 +++++++++++++++++++++++++++
drivers/scsi/megaraid/megaraid_sas_fusion.h | 695 +++++++++
6 files changed, 3748 insertions(+), 108 deletions(-)
create mode 100644 drivers/scsi/megaraid/megaraid_sas_fp.c
create mode 100644 drivers/scsi/megaraid/megaraid_sas_fusion.c
create mode 100644 drivers/scsi/megaraid/megaraid_sas_fusion.h
diff --git a/drivers/scsi/megaraid/Makefile b/drivers/scsi/megaraid/Makefile
index 6613a2ceea03..5826ed509e3e 100644
--- a/drivers/scsi/megaraid/Makefile
+++ b/drivers/scsi/megaraid/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_MEGARAID_MM) += megaraid_mm.o
obj-$(CONFIG_MEGARAID_MAILBOX) += megaraid_mbox.o
obj-$(CONFIG_MEGARAID_SAS) += megaraid_sas.o
-megaraid_sas-objs := megaraid_sas_base.o
+megaraid_sas-objs := megaraid_sas_base.o megaraid_sas_fusion.o \
+ megaraid_sas_fp.o
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 0663f2efda12..887f33ebcf21 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -32,6 +32,7 @@
#define PCI_DEVICE_ID_LSI_SAS0079GEN2 0x0079
#define PCI_DEVICE_ID_LSI_SAS0073SKINNY 0x0073
#define PCI_DEVICE_ID_LSI_SAS0071SKINNY 0x0071
+#define PCI_DEVICE_ID_LSI_FUSION 0x005b
/*
* =====================================
@@ -421,7 +422,6 @@ struct megasas_ctrl_prop {
* Add properties that can be controlled by
* a bit in the following structure.
*/
-
struct {
u32 copyBackDisabled : 1;
u32 SMARTerEnabled : 1;
@@ -701,6 +701,7 @@ struct megasas_ctrl_info {
#define MEGASAS_DEFAULT_INIT_ID -1
#define MEGASAS_MAX_LUN 8
#define MEGASAS_MAX_LD 64
+#define MEGASAS_DEFAULT_CMD_PER_LUN 128
#define MEGASAS_MAX_PD (MEGASAS_MAX_PD_CHANNELS * \
MEGASAS_MAX_DEV_PER_CHANNEL)
#define MEGASAS_MAX_LD_IDS (MEGASAS_MAX_LD_CHANNELS * \
@@ -768,7 +769,10 @@ struct megasas_ctrl_info {
*/
struct megasas_register_set {
- u32 reserved_0[4]; /*0000h*/
+ u32 doorbell; /*0000h*/
+ u32 fusion_seq_offset; /*0004h*/
+ u32 fusion_host_diag; /*0008h*/
+ u32 reserved_01; /*000Ch*/
u32 inbound_msg_0; /*0010h*/
u32 inbound_msg_1; /*0014h*/
@@ -788,15 +792,18 @@ struct megasas_register_set {
u32 inbound_queue_port; /*0040h*/
u32 outbound_queue_port; /*0044h*/
- u32 reserved_2[22]; /*0048h*/
+ u32 reserved_2[9]; /*0048h*/
+ u32 reply_post_host_index; /*006Ch*/
+ u32 reserved_2_2[12]; /*0070h*/
u32 outbound_doorbell_clear; /*00A0h*/
u32 reserved_3[3]; /*00A4h*/
u32 outbound_scratch_pad ; /*00B0h*/
+ u32 outbound_scratch_pad_2; /*00B4h*/
- u32 reserved_4[3]; /*00B4h*/
+ u32 reserved_4[2]; /*00B8h*/
u32 inbound_low_queue_port ; /*00C0h*/
@@ -1271,6 +1278,9 @@ struct megasas_instance {
u16 max_num_sge;
u16 max_fw_cmds;
+ /* For Fusion its num IOCTL cmds, for others MFI based its
+ max_fw_cmds */
+ u16 max_mfi_cmds;
u32 max_sectors_per_req;
struct megasas_aen_event *ev;
@@ -1320,9 +1330,15 @@ struct megasas_instance {
struct timer_list io_completion_timer;
struct list_head internal_reset_pending_q;
+ /* Ptr to hba specfic information */
+ void *ctrl_context;
u8 msi_flag;
struct msix_entry msixentry;
+ u64 map_id;
+ struct megasas_cmd *map_update_cmd;
unsigned long bar;
+ long reset_flags;
+ struct mutex reset_mutex;
};
enum {
@@ -1381,7 +1397,13 @@ struct megasas_cmd {
struct list_head list;
struct scsi_cmnd *scmd;
struct megasas_instance *instance;
- u32 frame_count;
+ union {
+ struct {
+ u16 smid;
+ u16 resvd;
+ } context;
+ u32 frame_count;
+ };
};
#define MAX_MGMT_ADAPTERS 1024
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 7f2b199b82c2..d532b330e03f 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -46,6 +46,7 @@
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
+#include "megaraid_sas_fusion.h"
#include "megaraid_sas.h"
/*
@@ -65,7 +66,7 @@ MODULE_VERSION(MEGASAS_VERSION);
MODULE_AUTHOR("megaraidlinux@lsi.com");
MODULE_DESCRIPTION("LSI MegaRAID SAS Driver");
-static int megasas_transition_to_ready(struct megasas_instance *instance);
+int megasas_transition_to_ready(struct megasas_instance *instance);
static int megasas_get_pd_list(struct megasas_instance *instance);
static int megasas_issue_init_mfi(struct megasas_instance *instance);
static int megasas_register_aen(struct megasas_instance *instance,
@@ -93,6 +94,8 @@ static struct pci_device_id megasas_pci_table[] = {
/* xscale IOP, vega */
{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
/* xscale IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FUSION)},
+ /* Fusion */
{}
};
@@ -106,14 +109,15 @@ static DEFINE_MUTEX(megasas_async_queue_mutex);
static int megasas_poll_wait_aen;
static DECLARE_WAIT_QUEUE_HEAD(megasas_poll_wait);
static u32 support_poll_for_event;
-static u32 megasas_dbg_lvl;
+u32 megasas_dbg_lvl;
/* define lock for aen poll */
spinlock_t poll_aen_lock;
-static void
+void
megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
u8 alt_status);
+
static irqreturn_t megasas_isr(int irq, void *devp);
static u32
megasas_init_adapter_mfi(struct megasas_instance *instance);
@@ -121,6 +125,23 @@ u32
megasas_build_and_issue_cmd(struct megasas_instance *instance,
struct scsi_cmnd *scmd);
static void megasas_complete_cmd_dpc(unsigned long instance_addr);
+void
+megasas_release_fusion(struct megasas_instance *instance);
+int
+megasas_ioc_init_fusion(struct megasas_instance *instance);
+void
+megasas_free_cmds_fusion(struct megasas_instance *instance);
+u8
+megasas_get_map_info(struct megasas_instance *instance);
+int
+megasas_sync_map_info(struct megasas_instance *instance);
+int
+wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd);
+void megasas_reset_reply_desc(struct megasas_instance *instance);
+u8 MR_ValidateMapInfo(struct MR_FW_RAID_MAP_ALL *map,
+ struct LD_LOAD_BALANCE_INFO *lbInfo);
+int megasas_reset_fusion(struct Scsi_Host *shost);
+void megasas_fusion_ocr_wq(struct work_struct *work);
void
megasas_issue_dcmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
@@ -135,7 +156,7 @@ megasas_issue_dcmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
*
* Returns a free command from the pool
*/
-static struct megasas_cmd *megasas_get_cmd(struct megasas_instance
+struct megasas_cmd *megasas_get_cmd(struct megasas_instance
*instance)
{
unsigned long flags;
@@ -160,7 +181,7 @@ static struct megasas_cmd *megasas_get_cmd(struct megasas_instance
* @instance: Adapter soft state
* @cmd: Command packet to be returned to free command pool
*/
-static inline void
+inline void
megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
{
unsigned long flags;
@@ -168,6 +189,7 @@ megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
spin_lock_irqsave(&instance->cmd_pool_lock, flags);
cmd->scmd = NULL;
+ cmd->frame_count = 0;
list_add_tail(&cmd->list, &instance->cmd_pool);
spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
@@ -775,6 +797,11 @@ static struct megasas_instance_template megasas_instance_template_gen2 = {
* specific to gen2 (deviceid : 0x78, 0x79) controllers
*/
+/*
+ * Template added for TB (Fusion)
+ */
+extern struct megasas_instance_template megasas_instance_template_fusion;
+
/**
* megasas_issue_polled - Issues a polling command
* @instance: Adapter soft state
@@ -782,11 +809,9 @@ static struct megasas_instance_template megasas_instance_template_gen2 = {
*
* For polling, MFI requires the cmd_status to be set to 0xFF before posting.
*/
-static int
+int
megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd)
{
- int i;
- u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000;
struct megasas_header *frame_hdr = &cmd->frame->hdr;
@@ -796,21 +821,12 @@ megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd)
/*
* Issue the frame using inbound queue port
*/
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr, 0, instance->reg_set);
+ instance->instancet->issue_dcmd(instance, cmd);
/*
* Wait for cmd_status to change
*/
- for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i++) {
- rmb();
- msleep(1);
- }
-
- if (frame_hdr->cmd_status == 0xff)
- return -ETIME;
-
- return 0;
+ return wait_and_poll(instance, cmd);
}
/**
@@ -828,8 +844,7 @@ megasas_issue_blocked_cmd(struct megasas_instance *instance,
{
cmd->cmd_status = ENODATA;
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr, 0, instance->reg_set);
+ instance->instancet->issue_dcmd(instance, cmd);
wait_event(instance->int_cmd_wait_q, cmd->cmd_status != ENODATA);
@@ -873,8 +888,7 @@ megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
cmd->sync_cmd = 1;
cmd->cmd_status = 0xFF;
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr, 0, instance->reg_set);
+ instance->instancet->issue_dcmd(instance, cmd);
/*
* Wait for this cmd to complete
@@ -1257,7 +1271,7 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
* Called by megasas_queue_command to find out if the command to be queued
* is a logical drive command
*/
-static inline int megasas_is_ldio(struct scsi_cmnd *cmd)
+inline int megasas_is_ldio(struct scsi_cmnd *cmd)
{
if (!MEGASAS_IS_LOGICAL(cmd))
return 0;
@@ -1463,15 +1477,44 @@ static int megasas_slave_configure(struct scsi_device *sdev)
return 0;
}
-static void megaraid_sas_kill_hba(struct megasas_instance *instance)
+void megaraid_sas_kill_hba(struct megasas_instance *instance)
{
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- writel(MFI_STOP_ADP,
- &instance->reg_set->reserved_0[0]);
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)) {
+ writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
} else {
- writel(MFI_STOP_ADP,
- &instance->reg_set->inbound_doorbell);
+ writel(MFI_STOP_ADP, &instance->reg_set->inbound_doorbell);
+ }
+}
+
+ /**
+ * megasas_check_and_restore_queue_depth - Check if queue depth needs to be
+ * restored to max value
+ * @instance: Adapter soft state
+ *
+ */
+void
+megasas_check_and_restore_queue_depth(struct megasas_instance *instance)
+{
+ unsigned long flags;
+ if (instance->flag & MEGASAS_FW_BUSY
+ && time_after(jiffies, instance->last_time + 5 * HZ)
+ && atomic_read(&instance->fw_outstanding) < 17) {
+
+ spin_lock_irqsave(instance->host->host_lock, flags);
+ instance->flag &= ~MEGASAS_FW_BUSY;
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ instance->host->can_queue =
+ instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
+ } else
+ instance->host->can_queue =
+ instance->max_fw_cmds - MEGASAS_INT_CMDS;
+
+ spin_unlock_irqrestore(instance->host->host_lock, flags);
}
}
@@ -1525,24 +1568,7 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr)
/*
* Check if we can restore can_queue
*/
- if (instance->flag & MEGASAS_FW_BUSY
- && time_after(jiffies, instance->last_time + 5 * HZ)
- && atomic_read(&instance->fw_outstanding) < 17) {
-
- spin_lock_irqsave(instance->host->host_lock, flags);
- instance->flag &= ~MEGASAS_FW_BUSY;
- if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- instance->host->can_queue =
- instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
- } else
- instance->host->can_queue =
- instance->max_fw_cmds - MEGASAS_INT_CMDS;
-
- spin_unlock_irqrestore(instance->host->host_lock, flags);
- }
+ megasas_check_and_restore_queue_depth(instance);
}
/**
@@ -1658,7 +1684,7 @@ static int megasas_wait_for_outstanding(struct megasas_instance *instance)
(instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
writel(MFI_STOP_ADP,
- &instance->reg_set->reserved_0[0]);
+ &instance->reg_set->doorbell);
} else {
writel(MFI_STOP_ADP,
&instance->reg_set->inbound_doorbell);
@@ -1762,11 +1788,16 @@ static int megasas_reset_device(struct scsi_cmnd *scmd)
static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
{
int ret;
+ struct megasas_instance *instance;
+ instance = (struct megasas_instance *)scmd->device->host->hostdata;
/*
* First wait for all commands to complete
*/
- ret = megasas_generic_reset(scmd);
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)
+ ret = megasas_reset_fusion(scmd->device->host);
+ else
+ ret = megasas_generic_reset(scmd);
return ret;
}
@@ -1935,13 +1966,14 @@ megasas_complete_abort(struct megasas_instance *instance,
* an alternate status (as in the case of aborted
* commands)
*/
-static void
+void
megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
u8 alt_status)
{
int exception = 0;
struct megasas_header *hdr = &cmd->frame->hdr;
unsigned long flags;
+ struct fusion_context *fusion = instance->ctrl_context;
/* flag for the retry reset */
cmd->retry_for_fw_reset = 0;
@@ -2034,6 +2066,37 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
case MFI_CMD_SMP:
case MFI_CMD_STP:
case MFI_CMD_DCMD:
+ /* Check for LD map update */
+ if ((cmd->frame->dcmd.opcode == MR_DCMD_LD_MAP_GET_INFO) &&
+ (cmd->frame->dcmd.mbox.b[1] == 1)) {
+ spin_lock_irqsave(instance->host->host_lock, flags);
+ if (cmd->frame->hdr.cmd_status != 0) {
+ if (cmd->frame->hdr.cmd_status !=
+ MFI_STAT_NOT_FOUND)
+ printk(KERN_WARNING "megasas: map sync"
+ "failed, status = 0x%x.\n",
+ cmd->frame->hdr.cmd_status);
+ else {
+ megasas_return_cmd(instance, cmd);
+ spin_unlock_irqrestore(
+ instance->host->host_lock,
+ flags);
+ break;
+ }
+ } else
+ instance->map_id++;
+ megasas_return_cmd(instance, cmd);
+ if (MR_ValidateMapInfo(
+ fusion->ld_map[(instance->map_id & 1)],
+ fusion->load_balance_info))
+ fusion->fast_path_io = 1;
+ else
+ fusion->fast_path_io = 0;
+ megasas_sync_map_info(instance);
+ spin_unlock_irqrestore(instance->host->host_lock,
+ flags);
+ break;
+ }
if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET_INFO ||
cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET) {
spin_lock_irqsave(&poll_aen_lock, flags);
@@ -2372,7 +2435,7 @@ static irqreturn_t megasas_isr(int irq, void *devp)
* states, driver must take steps to bring it to ready state. Otherwise, it
* has to wait for the ready state.
*/
-static int
+int
megasas_transition_to_ready(struct megasas_instance* instance)
{
int i;
@@ -2402,11 +2465,12 @@ megasas_transition_to_ready(struct megasas_instance* instance)
if ((instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
-
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_FUSION)) {
writel(
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
- &instance->reg_set->reserved_0[0]);
+ &instance->reg_set->doorbell);
} else {
writel(
MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
@@ -2419,11 +2483,13 @@ megasas_transition_to_ready(struct megasas_instance* instance)
case MFI_STATE_BOOT_MESSAGE_PENDING:
if ((instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
- (instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_FUSION)) {
writel(MFI_INIT_HOTPLUG,
- &instance->reg_set->reserved_0[0]);
+ &instance->reg_set->doorbell);
} else
writel(MFI_INIT_HOTPLUG,
&instance->reg_set->inbound_doorbell);
@@ -2440,9 +2506,23 @@ megasas_transition_to_ready(struct megasas_instance* instance)
if ((instance->pdev->device ==
PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device ==
- PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+ (instance->pdev->device
+ == PCI_DEVICE_ID_LSI_FUSION)) {
writel(MFI_RESET_FLAGS,
- &instance->reg_set->reserved_0[0]);
+ &instance->reg_set->doorbell);
+ if (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_FUSION) {
+ for (i = 0; i < (10 * 1000); i += 20) {
+ if (readl(
+ &instance->
+ reg_set->
+ doorbell) & 1)
+ msleep(20);
+ else
+ break;
+ }
+ }
} else
writel(MFI_RESET_FLAGS,
&instance->reg_set->inbound_doorbell);
@@ -2524,7 +2604,7 @@ megasas_transition_to_ready(struct megasas_instance* instance)
static void megasas_teardown_frame_pool(struct megasas_instance *instance)
{
int i;
- u32 max_cmd = instance->max_fw_cmds;
+ u32 max_cmd = instance->max_mfi_cmds;
struct megasas_cmd *cmd;
if (!instance->frame_dma_pool)
@@ -2575,7 +2655,7 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
u32 frame_count;
struct megasas_cmd *cmd;
- max_cmd = instance->max_fw_cmds;
+ max_cmd = instance->max_mfi_cmds;
/*
* Size of our frame is 64 bytes for MFI frame, followed by max SG
@@ -2661,14 +2741,15 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
* megasas_free_cmds - Free all the cmds in the free cmd pool
* @instance: Adapter soft state
*/
-static void megasas_free_cmds(struct megasas_instance *instance)
+void megasas_free_cmds(struct megasas_instance *instance)
{
int i;
/* First free the MFI frame pool */
megasas_teardown_frame_pool(instance);
/* Free all the commands in the cmd_list */
- for (i = 0; i < instance->max_fw_cmds; i++)
+ for (i = 0; i < instance->max_mfi_cmds; i++)
+
kfree(instance->cmd_list[i]);
/* Free the cmd_list buffer itself */
@@ -2696,14 +2777,14 @@ static void megasas_free_cmds(struct megasas_instance *instance)
* This array is used only to look up the megasas_cmd given the context. The
* free commands themselves are maintained in a linked list called cmd_pool.
*/
-static int megasas_alloc_cmds(struct megasas_instance *instance)
+int megasas_alloc_cmds(struct megasas_instance *instance)
{
int i;
int j;
u32 max_cmd;
struct megasas_cmd *cmd;
- max_cmd = instance->max_fw_cmds;
+ max_cmd = instance->max_mfi_cmds;
/*
* instance->cmd_list is an array of struct megasas_cmd pointers.
@@ -2717,6 +2798,7 @@ static int megasas_alloc_cmds(struct megasas_instance *instance)
return -ENOMEM;
}
+ memset(instance->cmd_list, 0, sizeof(struct megasas_cmd *) *max_cmd);
for (i = 0; i < max_cmd; i++) {
instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd),
@@ -3128,6 +3210,7 @@ megasas_init_adapter_mfi(struct megasas_instance *instance)
* does not exceed max cmds that the FW can support
*/
instance->max_fw_cmds = instance->max_fw_cmds-1;
+ instance->max_mfi_cmds = instance->max_fw_cmds;
instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
0x10;
/*
@@ -3221,6 +3304,9 @@ static int megasas_init_fw(struct megasas_instance *instance)
reg_set = instance->reg_set;
switch (instance->pdev->device) {
+ case PCI_DEVICE_ID_LSI_FUSION:
+ instance->instancet = &megasas_instance_template_fusion;
+ break;
case PCI_DEVICE_ID_LSI_SAS1078R:
case PCI_DEVICE_ID_LSI_SAS1078DE:
instance->instancet = &megasas_instance_template_ppc;
@@ -3322,9 +3408,10 @@ fail_ready_state:
*/
static void megasas_release_mfi(struct megasas_instance *instance)
{
- u32 reply_q_sz = sizeof(u32) * (instance->max_fw_cmds + 1);
+ u32 reply_q_sz = sizeof(u32) *(instance->max_mfi_cmds + 1);
- pci_free_consistent(instance->pdev, reply_q_sz,
+ if (instance->reply_queue)
+ pci_free_consistent(instance->pdev, reply_q_sz,
instance->reply_queue, instance->reply_queue_h);
megasas_free_cmds(instance);
@@ -3516,8 +3603,7 @@ megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
/*
* Issue the aen registration frame
*/
- instance->instancet->fire_cmd(instance,
- cmd->frame_phys_addr, 0, instance->reg_set);
+ instance->instancet->issue_dcmd(instance, cmd);
return 0;
}
@@ -3573,12 +3659,18 @@ static int megasas_io_attach(struct megasas_instance *instance)
host->this_id = instance->init_id;
host->sg_tablesize = instance->max_num_sge;
host->max_sectors = instance->max_sectors_per_req;
- host->cmd_per_lun = 128;
+ host->cmd_per_lun = MEGASAS_DEFAULT_CMD_PER_LUN;
host->max_channel = MEGASAS_MAX_CHANNELS - 1;
host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL;
host->max_lun = MEGASAS_MAX_LUN;
host->max_cmd_len = 16;
+ /* Fusion only supports host reset */
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) {
+ host->hostt->eh_device_reset_handler = NULL;
+ host->hostt->eh_bus_reset_handler = NULL;
+ }
+
/*
* Notify the mid-layer about the new controller
*/
@@ -3663,20 +3755,45 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
instance = (struct megasas_instance *)host->hostdata;
memset(instance, 0, sizeof(*instance));
atomic_set( &instance->fw_reset_no_pci_access, 0 );
+ instance->pdev = pdev;
- instance->producer = pci_alloc_consistent(pdev, sizeof(u32),
- &instance->producer_h);
- instance->consumer = pci_alloc_consistent(pdev, sizeof(u32),
- &instance->consumer_h);
+ switch (instance->pdev->device) {
+ case PCI_DEVICE_ID_LSI_FUSION:
+ {
+ struct fusion_context *fusion;
- if (!instance->producer || !instance->consumer) {
- printk(KERN_DEBUG "megasas: Failed to allocate memory for "
- "producer, consumer\n");
- goto fail_alloc_dma_buf;
+ instance->ctrl_context =
+ kzalloc(sizeof(struct fusion_context), GFP_KERNEL);
+ if (!instance->ctrl_context) {
+ printk(KERN_DEBUG "megasas: Failed to allocate "
+ "memory for Fusion context info\n");
+ goto fail_alloc_dma_buf;
+ }
+ fusion = instance->ctrl_context;
+ INIT_LIST_HEAD(&fusion->cmd_pool);
+ spin_lock_init(&fusion->cmd_pool_lock);
+ }
+ break;
+ default: /* For all other supported controllers */
+
+ instance->producer =
+ pci_alloc_consistent(pdev, sizeof(u32),
+ &instance->producer_h);
+ instance->consumer =
+ pci_alloc_consistent(pdev, sizeof(u32),
+ &instance->consumer_h);
+
+ if (!instance->producer || !instance->consumer) {
+ printk(KERN_DEBUG "megasas: Failed to allocate"
+ "memory for producer, consumer\n");
+ goto fail_alloc_dma_buf;
+ }
+
+ *instance->producer = 0;
+ *instance->consumer = 0;
+ break;
}
- *instance->producer = 0;
- *instance->consumer = 0;
megasas_poll_wait_aen = 0;
instance->flag_ieee = 0;
instance->ev = NULL;
@@ -3712,11 +3829,11 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
spin_lock_init(&poll_aen_lock);
mutex_init(&instance->aen_mutex);
+ mutex_init(&instance->reset_mutex);
/*
* Initialize PCI related and misc parameters
*/
- instance->pdev = pdev;
instance->host = host;
instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
instance->init_id = MEGASAS_DEFAULT_INIT_ID;
@@ -3734,7 +3851,10 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
instance->last_time = 0;
instance->disableOnlineCtrlReset = 1;
- INIT_WORK(&instance->work_init, process_fw_state_change_wq);
+ if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)
+ INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq);
+ else
+ INIT_WORK(&instance->work_init, process_fw_state_change_wq);
/*
* Initialize MFI Firmware
@@ -3817,6 +3937,8 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
pci_free_consistent(pdev, sizeof(u32), instance->producer,
instance->producer_h);
megasas_release_mfi(instance);
+ } else {
+ megasas_release_fusion(instance);
}
if (instance->consumer)
pci_free_consistent(pdev, sizeof(u32), instance->consumer,
@@ -3888,7 +4010,9 @@ static void megasas_shutdown_controller(struct megasas_instance *instance,
if (instance->aen_cmd)
megasas_issue_blocked_abort_cmd(instance, instance->aen_cmd);
-
+ if (instance->map_update_cmd)
+ megasas_issue_blocked_abort_cmd(instance,
+ instance->map_update_cmd);
dcmd = &cmd->frame->dcmd;
memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
@@ -3992,9 +4116,6 @@ megasas_resume(struct pci_dev *pdev)
* Initialize MFI Firmware
*/
- *instance->producer = 0;
- *instance->consumer = 0;
-
atomic_set(&instance->fw_outstanding, 0);
/*
@@ -4003,11 +4124,29 @@ megasas_resume(struct pci_dev *pdev)
if (megasas_transition_to_ready(instance))
goto fail_ready_state;
- if (megasas_issue_init_mfi(instance))
- goto fail_init_mfi;
+ switch (instance->pdev->device) {
+ case PCI_DEVICE_ID_LSI_FUSION:
+ {
+ megasas_reset_reply_desc(instance);
+ if (megasas_ioc_init_fusion(instance)) {
+ megasas_free_cmds(instance);
+ megasas_free_cmds_fusion(instance);
+ goto fail_init_mfi;
+ }
+ if (!megasas_get_map_info(instance))
+ megasas_sync_map_info(instance);
+ }
+ break;
+ default:
+ *instance->producer = 0;
+ *instance->consumer = 0;
+ if (megasas_issue_init_mfi(instance))
+ goto fail_init_mfi;
+ break;
+ }
- tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
- (unsigned long)instance);
+ tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
+ (unsigned long)instance);
/* Now re-enable MSI-X */
if (instance->msi_flag)
@@ -4076,10 +4215,12 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev)
int i;
struct Scsi_Host *host;
struct megasas_instance *instance;
+ struct fusion_context *fusion;
instance = pci_get_drvdata(pdev);
instance->unload = 1;
host = instance->host;
+ fusion = instance->ctrl_context;
if (poll_mode_io)
del_timer_sync(&instance->io_completion_timer);
@@ -4121,16 +4262,32 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev)
if (instance->msi_flag)
pci_disable_msix(instance->pdev);
- megasas_release_mfi(instance);
-
- pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
- instance->evt_detail, instance->evt_detail_h);
-
- pci_free_consistent(pdev, sizeof(u32), instance->producer,
- instance->producer_h);
-
- pci_free_consistent(pdev, sizeof(u32), instance->consumer,
- instance->consumer_h);
+ switch (instance->pdev->device) {
+ case PCI_DEVICE_ID_LSI_FUSION:
+ megasas_release_fusion(instance);
+ for (i = 0; i < 2 ; i++)
+ if (fusion->ld_map[i])
+ dma_free_coherent(&instance->pdev->dev,
+ fusion->map_sz,
+ fusion->ld_map[i],
+ fusion->
+ ld_map_phys[i]);
+ kfree(instance->ctrl_context);
+ break;
+ default:
+ megasas_release_mfi(instance);
+ pci_free_consistent(pdev,
+ sizeof(struct megasas_evt_detail),
+ instance->evt_detail,
+ instance->evt_detail_h);
+ pci_free_consistent(pdev, sizeof(u32),
+ instance->producer,
+ instance->producer_h);
+ pci_free_consistent(pdev, sizeof(u32),
+ instance->consumer,
+ instance->consumer_h);
+ break;
+ }
scsi_host_put(host);
@@ -4902,6 +5059,7 @@ megasas_aen_polling(struct work_struct *work)
break;
case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
case MR_EVT_FOREIGN_CFG_IMPORTED:
+ case MR_EVT_LD_STATE_CHANGE:
doscan = 1;
break;
default:
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
new file mode 100644
index 000000000000..53fa96ae2b3e
--- /dev/null
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -0,0 +1,516 @@
+/*
+ * Linux MegaRAID driver for SAS based RAID controllers
+ *
+ * Copyright (c) 2009-2011 LSI Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * FILE: megaraid_sas_fp.c
+ *
+ * Authors: LSI Corporation
+ * Sumant Patro
+ * Varad Talamacki
+ * Manoj Jose
+ *
+ * Send feedback to: <megaraidlinux@lsi.com>
+ *
+ * Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
+ * ATTN: Linuxraid
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <linux/uio.h>
+#include <linux/uaccess.h>
+#include <linux/fs.h>
+#include <linux/compat.h>
+#include <linux/blkdev.h>
+#include <linux/poll.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#include "megaraid_sas_fusion.h"
+#include <asm/div64.h>
+
+#define ABS_DIFF(a, b) (((a) > (b)) ? ((a) - (b)) : ((b) - (a)))
+#define MR_LD_STATE_OPTIMAL 3
+#define FALSE 0
+#define TRUE 1
+
+/* Prototypes */
+void
+mr_update_load_balance_params(struct MR_FW_RAID_MAP_ALL *map,
+ struct LD_LOAD_BALANCE_INFO *lbInfo);
+
+u32 mega_mod64(u64 dividend, u32 divisor)
+{
+ u64 d;
+ u32 remainder;
+
+ if (!divisor)
+ printk(KERN_ERR "megasas : DIVISOR is zero, in div fn\n");
+ d = dividend;
+ remainder = do_div(d, divisor);
+ return remainder;
+}
+
+/**
+ * @param dividend : Dividend
+ * @param divisor : Divisor
+ *
+ * @return quotient
+ **/
+u64 mega_div64_32(uint64_t dividend, uint32_t divisor)
+{
+ u32 remainder;
+ u64 d;
+
+ if (!divisor)
+ printk(KERN_ERR "megasas : DIVISOR is zero in mod fn\n");
+
+ d = dividend;
+ remainder = do_div(d, divisor);
+
+ return d;
+}
+
+struct MR_LD_RAID *MR_LdRaidGet(u32 ld, struct MR_FW_RAID_MAP_ALL *map)
+{
+ return &map->raidMap.ldSpanMap[ld].ldRaid;
+}
+
+static struct MR_SPAN_BLOCK_INFO *MR_LdSpanInfoGet(u32 ld,
+ struct MR_FW_RAID_MAP_ALL
+ *map)
+{
+ return &map->raidMap.ldSpanMap[ld].spanBlock[0];
+}
+
+static u8 MR_LdDataArmGet(u32 ld, u32 armIdx, struct MR_FW_RAID_MAP_ALL *map)
+{
+ return map->raidMap.ldSpanMap[ld].dataArmMap[armIdx];
+}
+
+static u16 MR_ArPdGet(u32 ar, u32 arm, struct MR_FW_RAID_MAP_ALL *map)
+{
+ return map->raidMap.arMapInfo[ar].pd[arm];
+}
+
+static u16 MR_LdSpanArrayGet(u32 ld, u32 span, struct MR_FW_RAID_MAP_ALL *map)
+{
+ return map->raidMap.ldSpanMap[ld].spanBlock[span].span.arrayRef;
+}
+
+static u16 MR_PdDevHandleGet(u32 pd, struct MR_FW_RAID_MAP_ALL *map)
+{
+ return map->raidMap.devHndlInfo[pd].curDevHdl;
+}
+
+u16 MR_GetLDTgtId(u32 ld, struct MR_FW_RAID_MAP_ALL *map)
+{
+ return map->raidMap.ldSpanMap[ld].ldRaid.targetId;
+}
+
+u16 MR_TargetIdToLdGet(u32 ldTgtId, struct MR_FW_RAID_MAP_ALL *map)
+{
+ return map->raidMap.ldTgtIdToLd[ldTgtId];
+}
+
+static struct MR_LD_SPAN *MR_LdSpanPtrGet(u32 ld, u32 span,
+ struct MR_FW_RAID_MAP_ALL *map)
+{
+ return &map->raidMap.ldSpanMap[ld].spanBlock[span].span;
+}
+
+/*
+ * This function will validate Map info data provided by FW
+ */
+u8 MR_ValidateMapInfo(struct MR_FW_RAID_MAP_ALL *map,
+ struct LD_LOAD_BALANCE_INFO *lbInfo)
+{
+ struct MR_FW_RAID_MAP *pFwRaidMap = &map->raidMap;
+
+ if (pFwRaidMap->totalSize !=
+ (sizeof(struct MR_FW_RAID_MAP) -sizeof(struct MR_LD_SPAN_MAP) +
+ (sizeof(struct MR_LD_SPAN_MAP) *pFwRaidMap->ldCount))) {
+ printk(KERN_ERR "megasas: map info structure size 0x%x is not matching with ld count\n",
+ (unsigned int)((sizeof(struct MR_FW_RAID_MAP) -
+ sizeof(struct MR_LD_SPAN_MAP)) +
+ (sizeof(struct MR_LD_SPAN_MAP) *
+ pFwRaidMap->ldCount)));
+ printk(KERN_ERR "megasas: span map %x, pFwRaidMap->totalSize "
+ ": %x\n", (unsigned int)sizeof(struct MR_LD_SPAN_MAP),
+ pFwRaidMap->totalSize);
+ return 0;
+ }
+
+ mr_update_load_balance_params(map, lbInfo);
+
+ return 1;
+}
+
+u32 MR_GetSpanBlock(u32 ld, u64 row, u64 *span_blk,
+ struct MR_FW_RAID_MAP_ALL *map, int *div_error)
+{
+ struct MR_SPAN_BLOCK_INFO *pSpanBlock = MR_LdSpanInfoGet(ld, map);
+ struct MR_QUAD_ELEMENT *quad;
+ struct MR_LD_RAID *raid = MR_LdRaidGet(ld, map);
+ u32 span, j;
+
+ for (span = 0; span < raid->spanDepth; span++, pSpanBlock++) {
+
+ for (j = 0; j < pSpanBlock->block_span_info.noElements; j++) {
+ quad = &pSpanBlock->block_span_info.quad[j];
+
+ if (quad->diff == 0) {
+ *div_error = 1;
+ return span;
+ }
+ if (quad->logStart <= row && row <= quad->logEnd &&
+ (mega_mod64(row-quad->logStart, quad->diff)) == 0) {
+ if (span_blk != NULL) {
+ u64 blk, debugBlk;
+ blk =
+ mega_div64_32(
+ (row-quad->logStart),
+ quad->diff);
+ debugBlk = blk;
+
+ blk = (blk + quad->offsetInSpan) <<
+ raid->stripeShift;
+ *span_blk = blk;
+ }
+ return span;
+ }
+ }
+ }
+ return span;
+}
+
+/*
+******************************************************************************
+*
+* This routine calculates the arm, span and block for the specified stripe and
+* reference in stripe.
+*
+* Inputs :
+*
+* ld - Logical drive number
+* stripRow - Stripe number
+* stripRef - Reference in stripe
+*
+* Outputs :
+*
+* span - Span number
+* block - Absolute Block number in the physical disk
+*/
+u8 MR_GetPhyParams(u32 ld, u64 stripRow, u16 stripRef, u64 *pdBlock,
+ u16 *pDevHandle, struct RAID_CONTEXT *pRAID_Context,
+ struct MR_FW_RAID_MAP_ALL *map)
+{
+ struct MR_LD_RAID *raid = MR_LdRaidGet(ld, map);
+ u32 pd, arRef;
+ u8 physArm, span;
+ u64 row;
+ u8 retval = TRUE;
+ int error_code = 0;
+
+ row = mega_div64_32(stripRow, raid->rowDataSize);
+
+ if (raid->level == 6) {
+ /* logical arm within row */
+ u32 logArm = mega_mod64(stripRow, raid->rowDataSize);
+ u32 rowMod, armQ, arm;
+
+ if (raid->rowSize == 0)
+ return FALSE;
+ /* get logical row mod */
+ rowMod = mega_mod64(row, raid->rowSize);
+ armQ = raid->rowSize-1-rowMod; /* index of Q drive */
+ arm = armQ+1+logArm; /* data always logically follows Q */
+ if (arm >= raid->rowSize) /* handle wrap condition */
+ arm -= raid->rowSize;
+ physArm = (u8)arm;
+ } else {
+ if (raid->modFactor == 0)
+ return FALSE;
+ physArm = MR_LdDataArmGet(ld, mega_mod64(stripRow,
+ raid->modFactor),
+ map);
+ }
+
+ if (raid->spanDepth == 1) {
+ span = 0;
+ *pdBlock = row << raid->stripeShift;
+ } else {
+ span = (u8)MR_GetSpanBlock(ld, row, pdBlock, map, &error_code);
+ if (error_code == 1)
+ return FALSE;
+ }
+
+ /* Get the array on which this span is present */
+ arRef = MR_LdSpanArrayGet(ld, span, map);
+ pd = MR_ArPdGet(arRef, physArm, map); /* Get the pd */
+
+ if (pd != MR_PD_INVALID)
+ /* Get dev handle from Pd. */
+ *pDevHandle = MR_PdDevHandleGet(pd, map);
+ else {
+ *pDevHandle = MR_PD_INVALID; /* set dev handle as invalid. */
+ if (raid->level >= 5)
+ pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE;
+ else if (raid->level == 1) {
+ /* Get alternate Pd. */
+ pd = MR_ArPdGet(arRef, physArm + 1, map);
+ if (pd != MR_PD_INVALID)
+ /* Get dev handle from Pd */
+ *pDevHandle = MR_PdDevHandleGet(pd, map);
+ }
+ retval = FALSE;
+ }
+
+ *pdBlock += stripRef + MR_LdSpanPtrGet(ld, span, map)->startBlk;
+ pRAID_Context->spanArm = (span << RAID_CTX_SPANARM_SPAN_SHIFT) |
+ physArm;
+ return retval;
+}
+
+/*
+******************************************************************************
+*
+* MR_BuildRaidContext function
+*
+* This function will initiate command processing. The start/end row and strip
+* information is calculated then the lock is acquired.
+* This function will return 0 if region lock was acquired OR return num strips
+*/
+u8
+MR_BuildRaidContext(struct IO_REQUEST_INFO *io_info,
+ struct RAID_CONTEXT *pRAID_Context,
+ struct MR_FW_RAID_MAP_ALL *map)
+{
+ struct MR_LD_RAID *raid;
+ u32 ld, stripSize, stripe_mask;
+ u64 endLba, endStrip, endRow, start_row, start_strip;
+ u64 regStart;
+ u32 regSize;
+ u8 num_strips, numRows;
+ u16 ref_in_start_stripe, ref_in_end_stripe;
+ u64 ldStartBlock;
+ u32 numBlocks, ldTgtId;
+ u8 isRead;
+ u8 retval = 0;
+
+ ldStartBlock = io_info->ldStartBlock;
+ numBlocks = io_info->numBlocks;
+ ldTgtId = io_info->ldTgtId;
+ isRead = io_info->isRead;
+
+ ld = MR_TargetIdToLdGet(ldTgtId, map);
+ raid = MR_LdRaidGet(ld, map);
+
+ stripSize = 1 << raid->stripeShift;
+ stripe_mask = stripSize-1;
+ /*
+ * calculate starting row and stripe, and number of strips and rows
+ */
+ start_strip = ldStartBlock >> raid->stripeShift;
+ ref_in_start_stripe = (u16)(ldStartBlock & stripe_mask);
+ endLba = ldStartBlock + numBlocks - 1;
+ ref_in_end_stripe = (u16)(endLba & stripe_mask);
+ endStrip = endLba >> raid->stripeShift;
+ num_strips = (u8)(endStrip - start_strip + 1); /* End strip */
+ if (raid->rowDataSize == 0)
+ return FALSE;
+ start_row = mega_div64_32(start_strip, raid->rowDataSize);
+ endRow = mega_div64_32(endStrip, raid->rowDataSize);
+ numRows = (u8)(endRow - start_row + 1);
+
+ /*
+ * calculate region info.
+ */
+
+ /* assume region is at the start of the first row */
+ regStart = start_row << raid->stripeShift;
+ /* assume this IO needs the full row - we'll adjust if not true */
+ regSize = stripSize;
+
+ /* If IO spans more than 1 strip, fp is not possible
+ FP is not possible for writes on non-0 raid levels
+ FP is not possible if LD is not capable */
+ if (num_strips > 1 || (!isRead && raid->level != 0) ||
+ !raid->capability.fpCapable) {
+ io_info->fpOkForIo = FALSE;
+ } else {
+ io_info->fpOkForIo = TRUE;
+ }
+
+ if (numRows == 1) {
+ /* single-strip IOs can always lock only the data needed */
+ if (num_strips == 1) {
+ regStart += ref_in_start_stripe;
+ regSize = numBlocks;
+ }
+ /* multi-strip IOs always need to full stripe locked */
+ } else {
+ if (start_strip == (start_row + 1) * raid->rowDataSize - 1) {
+ /* If the start strip is the last in the start row */
+ regStart += ref_in_start_stripe;
+ regSize = stripSize - ref_in_start_stripe;
+ /* initialize count to sectors from startref to end
+ of strip */
+ }
+
+ if (numRows > 2)
+ /* Add complete rows in the middle of the transfer */
+ regSize += (numRows-2) << raid->stripeShift;
+
+ /* if IO ends within first strip of last row */
+ if (endStrip == endRow*raid->rowDataSize)
+ regSize += ref_in_end_stripe+1;
+ else
+ regSize += stripSize;
+ }
+
+ pRAID_Context->timeoutValue = map->raidMap.fpPdIoTimeoutSec;
+ pRAID_Context->regLockFlags = (isRead) ? REGION_TYPE_SHARED_READ :
+ raid->regTypeReqOnWrite;
+ pRAID_Context->VirtualDiskTgtId = raid->targetId;
+ pRAID_Context->regLockRowLBA = regStart;
+ pRAID_Context->regLockLength = regSize;
+ pRAID_Context->configSeqNum = raid->seqNum;
+
+ /*Get Phy Params only if FP capable, or else leave it to MR firmware
+ to do the calculation.*/
+ if (io_info->fpOkForIo) {
+ retval = MR_GetPhyParams(ld, start_strip, ref_in_start_stripe,
+ &io_info->pdBlock,
+ &io_info->devHandle, pRAID_Context,
+ map);
+ /* If IO on an invalid Pd, then FP i snot possible */
+ if (io_info->devHandle == MR_PD_INVALID)
+ io_info->fpOkForIo = FALSE;
+ return retval;
+ } else if (isRead) {
+ uint stripIdx;
+ for (stripIdx = 0; stripIdx < num_strips; stripIdx++) {
+ if (!MR_GetPhyParams(ld, start_strip + stripIdx,
+ ref_in_start_stripe,
+ &io_info->pdBlock,
+ &io_info->devHandle,
+ pRAID_Context, map))
+ return TRUE;
+ }
+ }
+ return TRUE;
+}
+
+void
+mr_update_load_balance_params(struct MR_FW_RAID_MAP_ALL *map,
+ struct LD_LOAD_BALANCE_INFO *lbInfo)
+{
+ int ldCount;
+ u16 ld;
+ struct MR_LD_RAID *raid;
+
+ for (ldCount = 0; ldCount < MAX_LOGICAL_DRIVES; ldCount++) {
+ ld = MR_TargetIdToLdGet(ldCount, map);
+ if (ld >= MAX_LOGICAL_DRIVES) {
+ lbInfo[ldCount].loadBalanceFlag = 0;
+ continue;
+ }
+
+ raid = MR_LdRaidGet(ld, map);
+
+ /* Two drive Optimal RAID 1 */
+ if ((raid->level == 1) && (raid->rowSize == 2) &&
+ (raid->spanDepth == 1) && raid->ldState ==
+ MR_LD_STATE_OPTIMAL) {
+ u32 pd, arRef;
+
+ lbInfo[ldCount].loadBalanceFlag = 1;
+
+ /* Get the array on which this span is present */
+ arRef = MR_LdSpanArrayGet(ld, 0, map);
+
+ /* Get the Pd */
+ pd = MR_ArPdGet(arRef, 0, map);
+ /* Get dev handle from Pd */
+ lbInfo[ldCount].raid1DevHandle[0] =
+ MR_PdDevHandleGet(pd, map);
+ /* Get the Pd */
+ pd = MR_ArPdGet(arRef, 1, map);
+
+ /* Get the dev handle from Pd */
+ lbInfo[ldCount].raid1DevHandle[1] =
+ MR_PdDevHandleGet(pd, map);
+ } else
+ lbInfo[ldCount].loadBalanceFlag = 0;
+ }
+}
+
+u8 megasas_get_best_arm(struct LD_LOAD_BALANCE_INFO *lbInfo, u8 arm, u64 block,
+ u32 count)
+{
+ u16 pend0, pend1;
+ u64 diff0, diff1;
+ u8 bestArm;
+
+ /* get the pending cmds for the data and mirror arms */
+ pend0 = atomic_read(&lbInfo->scsi_pending_cmds[0]);
+ pend1 = atomic_read(&lbInfo->scsi_pending_cmds[1]);
+
+ /* Determine the disk whose head is nearer to the req. block */
+ diff0 = ABS_DIFF(block, lbInfo->last_accessed_block[0]);
+ diff1 = ABS_DIFF(block, lbInfo->last_accessed_block[1]);
+ bestArm = (diff0 <= diff1 ? 0 : 1);
+
+ if ((bestArm == arm && pend0 > pend1 + 16) ||
+ (bestArm != arm && pend1 > pend0 + 16))
+ bestArm ^= 1;
+
+ /* Update the last accessed block on the correct pd */
+ lbInfo->last_accessed_block[bestArm] = block + count - 1;
+
+ return bestArm;
+}
+
+u16 get_updated_dev_handle(struct LD_LOAD_BALANCE_INFO *lbInfo,
+ struct IO_REQUEST_INFO *io_info)
+{
+ u8 arm, old_arm;
+ u16 devHandle;
+
+ old_arm = lbInfo->raid1DevHandle[0] == io_info->devHandle ? 0 : 1;
+
+ /* get best new arm */
+ arm = megasas_get_best_arm(lbInfo, old_arm, io_info->ldStartBlock,
+ io_info->numBlocks);
+ devHandle = lbInfo->raid1DevHandle[arm];
+ atomic_inc(&lbInfo->scsi_pending_cmds[arm]);
+
+ return devHandle;
+}
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
new file mode 100644
index 000000000000..c1e09d5a6196
--- /dev/null
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -0,0 +1,2248 @@
+/*
+ * Linux MegaRAID driver for SAS based RAID controllers
+ *
+ * Copyright (c) 2009-2011 LSI Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * FILE: megaraid_sas_fusion.c
+ *
+ * Authors: LSI Corporation
+ * Sumant Patro
+ * Adam Radford <linuxraid@lsi.com>
+ *
+ * Send feedback to: <megaraidlinux@lsi.com>
+ *
+ * Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
+ * ATTN: Linuxraid
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <linux/uio.h>
+#include <linux/uaccess.h>
+#include <linux/fs.h>
+#include <linux/compat.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#include "megaraid_sas_fusion.h"
+#include "megaraid_sas.h"
+
+extern void megasas_free_cmds(struct megasas_instance *instance);
+extern struct megasas_cmd *megasas_get_cmd(struct megasas_instance
+ *instance);
+extern void
+megasas_complete_cmd(struct megasas_instance *instance,
+ struct megasas_cmd *cmd, u8 alt_status);
+int megasas_is_ldio(struct scsi_cmnd *cmd);
+int
+wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd);
+
+void
+megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd);
+int megasas_alloc_cmds(struct megasas_instance *instance);
+int
+megasas_clear_intr_fusion(struct megasas_register_set __iomem *regs);
+int
+megasas_issue_polled(struct megasas_instance *instance,
+ struct megasas_cmd *cmd);
+
+u8
+MR_BuildRaidContext(struct IO_REQUEST_INFO *io_info,
+ struct RAID_CONTEXT *pRAID_Context,
+ struct MR_FW_RAID_MAP_ALL *map);
+u16 MR_TargetIdToLdGet(u32 ldTgtId, struct MR_FW_RAID_MAP_ALL *map);
+struct MR_LD_RAID *MR_LdRaidGet(u32 ld, struct MR_FW_RAID_MAP_ALL *map);
+
+u16 MR_GetLDTgtId(u32 ld, struct MR_FW_RAID_MAP_ALL *map);
+u8 MR_ValidateMapInfo(struct MR_FW_RAID_MAP_ALL *map,
+ struct LD_LOAD_BALANCE_INFO *lbInfo);
+u16 get_updated_dev_handle(struct LD_LOAD_BALANCE_INFO *lbInfo,
+ struct IO_REQUEST_INFO *in_info);
+int megasas_transition_to_ready(struct megasas_instance *instance);
+void megaraid_sas_kill_hba(struct megasas_instance *instance);
+
+extern u32 megasas_dbg_lvl;
+
+/**
+ * megasas_enable_intr_fusion - Enables interrupts
+ * @regs: MFI register set
+ */
+void
+megasas_enable_intr_fusion(struct megasas_register_set __iomem *regs)
+{
+ writel(~MFI_FUSION_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_fusion - Disables interrupt
+ * @regs: MFI register set
+ */
+void
+megasas_disable_intr_fusion(struct megasas_register_set __iomem *regs)
+{
+ u32 mask = 0xFFFFFFFF;
+ u32 status;
+
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ status = readl(®s->outbound_intr_mask);
+}
+
+int
+megasas_clear_intr_fusion(struct megasas_register_set __iomem *regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (status & 1) {
+ writel(status, ®s->outbound_intr_status);
+ readl(®s->outbound_intr_status);
+ return 1;
+ }
+ if (!(status & MFI_FUSION_ENABLE_INTERRUPT_MASK))
+ return 0;
+
+ /*
+ * dummy read to flush PCI
+ */
+ readl(®s->outbound_intr_status);
+
+ return 1;
+}
+
+/**
+ * megasas_get_cmd_fusion - Get a command from the free pool
+ * @instance: Adapter soft state
+ *
+ * Returns a free command from the pool
+ */
+struct megasas_cmd_fusion *megasas_get_cmd_fusion(struct megasas_instance
+ *instance)
+{
+ unsigned long flags;
+ struct fusion_context *fusion =
+ (struct fusion_context *)instance->ctrl_context;
+ struct megasas_cmd_fusion *cmd = NULL;
+
+ spin_lock_irqsave(&fusion->cmd_pool_lock, flags);
+
+ if (!list_empty(&fusion->cmd_pool)) {
+ cmd = list_entry((&fusion->cmd_pool)->next,
+ struct megasas_cmd_fusion, list);
+ list_del_init(&cmd->list);
+ } else {
+ printk(KERN_ERR "megasas: Command pool (fusion) empty!\n");
+ }
+
+ spin_unlock_irqrestore(&fusion->cmd_pool_lock, flags);
+ return cmd;
+}
+
+/**
+ * megasas_return_cmd_fusion - Return a cmd to free command pool
+ * @instance: Adapter soft state
+ * @cmd: Command packet to be returned to free command pool
+ */
+static inline void
+megasas_return_cmd_fusion(struct megasas_instance *instance,
+ struct megasas_cmd_fusion *cmd)
+{
+ unsigned long flags;
+ struct fusion_context *fusion =
+ (struct fusion_context *)instance->ctrl_context;
+
+ spin_lock_irqsave(&fusion->cmd_pool_lock, flags);
+
+ cmd->scmd = NULL;
+ cmd->sync_cmd_idx = (u32)ULONG_MAX;
+ list_add_tail(&cmd->list, &fusion->cmd_pool);
+
+ spin_unlock_irqrestore(&fusion->cmd_pool_lock, flags);
+}
+
+/**
+ * megasas_teardown_frame_pool_fusion - Destroy the cmd frame DMA pool
+ * @instance: Adapter soft state
+ */
+static void megasas_teardown_frame_pool_fusion(
+ struct megasas_instance *instance)
+{
+ int i;
+ struct fusion_context *fusion = instance->ctrl_context;
+
+ u16 max_cmd = instance->max_fw_cmds;
+
+ struct megasas_cmd_fusion *cmd;
+
+ if (!fusion->sg_dma_pool || !fusion->sense_dma_pool) {
+ printk(KERN_ERR "megasas: dma pool is null. SG Pool %p, "
+ "sense pool : %p\n", fusion->sg_dma_pool,
+ fusion->sense_dma_pool);
+ return;
+ }
+
+ /*
+ * Return all frames to pool
+ */
+ for (i = 0; i < max_cmd; i++) {
+
+ cmd = fusion->cmd_list[i];
+
+ if (cmd->sg_frame)
+ pci_pool_free(fusion->sg_dma_pool, cmd->sg_frame,
+ cmd->sg_frame_phys_addr);
+
+ if (cmd->sense)
+ pci_pool_free(fusion->sense_dma_pool, cmd->sense,
+ cmd->sense_phys_addr);
+ }
+
+ /*
+ * Now destroy the pool itself
+ */
+ pci_pool_destroy(fusion->sg_dma_pool);
+ pci_pool_destroy(fusion->sense_dma_pool);
+
+ fusion->sg_dma_pool = NULL;
+ fusion->sense_dma_pool = NULL;
+}
+
+/**
+ * megasas_free_cmds_fusion - Free all the cmds in the free cmd pool
+ * @instance: Adapter soft state
+ */
+void
+megasas_free_cmds_fusion(struct megasas_instance *instance)
+{
+ int i;
+ struct fusion_context *fusion = instance->ctrl_context;
+
+ u32 max_cmds, req_sz, reply_sz, io_frames_sz;
+
+
+ req_sz = fusion->request_alloc_sz;
+ reply_sz = fusion->reply_alloc_sz;
+ io_frames_sz = fusion->io_frames_alloc_sz;
+
+ max_cmds = instance->max_fw_cmds;
+
+ /* Free descriptors and request Frames memory */
+ if (fusion->req_frames_desc)
+ dma_free_coherent(&instance->pdev->dev, req_sz,
+ fusion->req_frames_desc,
+ fusion->req_frames_desc_phys);
+
+ if (fusion->reply_frames_desc) {
+ pci_pool_free(fusion->reply_frames_desc_pool,
+ fusion->reply_frames_desc,
+ fusion->reply_frames_desc_phys);
+ pci_pool_destroy(fusion->reply_frames_desc_pool);
+ }
+
+ if (fusion->io_request_frames) {
+ pci_pool_free(fusion->io_request_frames_pool,
+ fusion->io_request_frames,
+ fusion->io_request_frames_phys);
+ pci_pool_destroy(fusion->io_request_frames_pool);
+ }
+
+ /* Free the Fusion frame pool */
+ megasas_teardown_frame_pool_fusion(instance);
+
+ /* Free all the commands in the cmd_list */
+ for (i = 0; i < max_cmds; i++)
+ kfree(fusion->cmd_list[i]);
+
+ /* Free the cmd_list buffer itself */
+ kfree(fusion->cmd_list);
+ fusion->cmd_list = NULL;
+
+ INIT_LIST_HEAD(&fusion->cmd_pool);
+}
+
+/**
+ * megasas_create_frame_pool_fusion - Creates DMA pool for cmd frames
+ * @instance: Adapter soft state
+ *
+ */
+static int megasas_create_frame_pool_fusion(struct megasas_instance *instance)
+{
+ int i;
+ u32 max_cmd;
+ struct fusion_context *fusion;
+ struct megasas_cmd_fusion *cmd;
+ u32 total_sz_chain_frame;
+
+ fusion = instance->ctrl_context;
+ max_cmd = instance->max_fw_cmds;
+
+ total_sz_chain_frame = MEGASAS_MAX_SZ_CHAIN_FRAME;
+
+ /*
+ * Use DMA pool facility provided by PCI layer
+ */
+
+ fusion->sg_dma_pool = pci_pool_create("megasas sg pool fusion",
+ instance->pdev,
+ total_sz_chain_frame, 4,
+ 0);
+ if (!fusion->sg_dma_pool) {
+ printk(KERN_DEBUG "megasas: failed to setup request pool "
+ "fusion\n");
+ return -ENOMEM;
+ }
+ fusion->sense_dma_pool = pci_pool_create("megasas sense pool fusion",
+ instance->pdev,
+ SCSI_SENSE_BUFFERSIZE, 64, 0);
+
+ if (!fusion->sense_dma_pool) {
+ printk(KERN_DEBUG "megasas: failed to setup sense pool "
+ "fusion\n");
+ pci_pool_destroy(fusion->sg_dma_pool);
+ fusion->sg_dma_pool = NULL;
+ return -ENOMEM;
+ }
+
+ /*
+ * Allocate and attach a frame to each of the commands in cmd_list
+ */
+ for (i = 0; i < max_cmd; i++) {
+
+ cmd = fusion->cmd_list[i];
+
+ cmd->sg_frame = pci_pool_alloc(fusion->sg_dma_pool,
+ GFP_KERNEL,
+ &cmd->sg_frame_phys_addr);
+
+ cmd->sense = pci_pool_alloc(fusion->sense_dma_pool,
+ GFP_KERNEL, &cmd->sense_phys_addr);
+ /*
+ * megasas_teardown_frame_pool_fusion() takes care of freeing
+ * whatever has been allocated
+ */
+ if (!cmd->sg_frame || !cmd->sense) {
+ printk(KERN_DEBUG "megasas: pci_pool_alloc failed\n");
+ megasas_teardown_frame_pool_fusion(instance);
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+/**
+ * megasas_alloc_cmds_fusion - Allocates the command packets
+ * @instance: Adapter soft state
+ *
+ *
+ * Each frame has a 32-bit field called context. This context is used to get
+ * back the megasas_cmd_fusion from the frame when a frame gets completed
+ * In this driver, the 32 bit values are the indices into an array cmd_list.
+ * This array is used only to look up the megasas_cmd_fusion given the context.
+ * The free commands themselves are maintained in a linked list called cmd_pool.
+ *
+ * cmds are formed in the io_request and sg_frame members of the
+ * megasas_cmd_fusion. The context field is used to get a request descriptor
+ * and is used as SMID of the cmd.
+ * SMID value range is from 1 to max_fw_cmds.
+ */
+int
+megasas_alloc_cmds_fusion(struct megasas_instance *instance)
+{
+ int i, j;
+ u32 max_cmd, io_frames_sz;
+ struct fusion_context *fusion;
+ struct megasas_cmd_fusion *cmd;
+ union MPI2_REPLY_DESCRIPTORS_UNION *reply_desc;
+ u32 offset;
+ dma_addr_t io_req_base_phys;
+ u8 *io_req_base;
+
+ fusion = instance->ctrl_context;
+
+ max_cmd = instance->max_fw_cmds;
+
+ fusion->req_frames_desc =
+ dma_alloc_coherent(&instance->pdev->dev,
+ fusion->request_alloc_sz,
+ &fusion->req_frames_desc_phys, GFP_KERNEL);
+
+ if (!fusion->req_frames_desc) {
+ printk(KERN_ERR "megasas; Could not allocate memory for "
+ "request_frames\n");
+ goto fail_req_desc;
+ }
+
+ fusion->reply_frames_desc_pool =
+ pci_pool_create("reply_frames pool", instance->pdev,
+ fusion->reply_alloc_sz, 16, 0);
+
+ if (!fusion->reply_frames_desc_pool) {
+ printk(KERN_ERR "megasas; Could not allocate memory for "
+ "reply_frame pool\n");
+ goto fail_reply_desc;
+ }
+
+ fusion->reply_frames_desc =
+ pci_pool_alloc(fusion->reply_frames_desc_pool, GFP_KERNEL,
+ &fusion->reply_frames_desc_phys);
+ if (!fusion->reply_frames_desc) {
+ printk(KERN_ERR "megasas; Could not allocate memory for "
+ "reply_frame pool\n");
+ pci_pool_destroy(fusion->reply_frames_desc_pool);
+ goto fail_reply_desc;
+ }
+
+ reply_desc = fusion->reply_frames_desc;
+ for (i = 0; i < fusion->reply_q_depth; i++, reply_desc++)
+ reply_desc->Words = ULLONG_MAX;
+
+ io_frames_sz = fusion->io_frames_alloc_sz;
+
+ fusion->io_request_frames_pool =
+ pci_pool_create("io_request_frames pool", instance->pdev,
+ fusion->io_frames_alloc_sz, 16, 0);
+
+ if (!fusion->io_request_frames_pool) {
+ printk(KERN_ERR "megasas: Could not allocate memory for "
+ "io_request_frame pool\n");
+ goto fail_io_frames;
+ }
+
+ fusion->io_request_frames =
+ pci_pool_alloc(fusion->io_request_frames_pool, GFP_KERNEL,
+ &fusion->io_request_frames_phys);
+ if (!fusion->io_request_frames) {
+ printk(KERN_ERR "megasas: Could not allocate memory for "
+ "io_request_frames frames\n");
+ pci_pool_destroy(fusion->io_request_frames_pool);
+ goto fail_io_frames;
+ }
+
+ /*
+ * fusion->cmd_list is an array of struct megasas_cmd_fusion pointers.
+ * Allocate the dynamic array first and then allocate individual
+ * commands.
+ */
+ fusion->cmd_list = kmalloc(sizeof(struct megasas_cmd_fusion *)
+ *max_cmd, GFP_KERNEL);
+
+ if (!fusion->cmd_list) {
+ printk(KERN_DEBUG "megasas: out of memory. Could not alloc "
+ "memory for cmd_list_fusion\n");
+ goto fail_cmd_list;
+ }
+
+ memset(fusion->cmd_list, 0, sizeof(struct megasas_cmd_fusion *)
+ *max_cmd);
+
+ max_cmd = instance->max_fw_cmds;
+ for (i = 0; i < max_cmd; i++) {
+ fusion->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd_fusion),
+ GFP_KERNEL);
+ if (!fusion->cmd_list[i]) {
+ printk(KERN_ERR "Could not alloc cmd list fusion\n");
+
+ for (j = 0; j < i; j++)
+ kfree(fusion->cmd_list[j]);
+
+ kfree(fusion->cmd_list);
+ fusion->cmd_list = NULL;
+ goto fail_cmd_list;
+ }
+ }
+
+ /* The first 256 bytes (SMID 0) is not used. Don't add to cmd list */
+ io_req_base = fusion->io_request_frames +
+ MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
+ io_req_base_phys = fusion->io_request_frames_phys +
+ MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
+
+ /*
+ * Add all the commands to command pool (fusion->cmd_pool)
+ */
+
+ /* SMID 0 is reserved. Set SMID/index from 1 */
+ for (i = 0; i < max_cmd; i++) {
+ cmd = fusion->cmd_list[i];
+ offset = MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE * i;
+ memset(cmd, 0, sizeof(struct megasas_cmd_fusion));
+ cmd->index = i + 1;
+ cmd->scmd = NULL;
+ cmd->sync_cmd_idx = (u32)ULONG_MAX; /* Set to Invalid */
+ cmd->instance = instance;
+ cmd->io_request =
+ (struct MPI2_RAID_SCSI_IO_REQUEST *)
+ (io_req_base + offset);
+ memset(cmd->io_request, 0,
+ sizeof(struct MPI2_RAID_SCSI_IO_REQUEST));
+ cmd->io_request_phys_addr = io_req_base_phys + offset;
+
+ list_add_tail(&cmd->list, &fusion->cmd_pool);
+ }
+
+ /*
+ * Create a frame pool and assign one frame to each cmd
+ */
+ if (megasas_create_frame_pool_fusion(instance)) {
+ printk(KERN_DEBUG "megasas: Error creating frame DMA pool\n");
+ megasas_free_cmds_fusion(instance);
+ goto fail_req_desc;
+ }
+
+ return 0;
+
+fail_cmd_list:
+ pci_pool_free(fusion->io_request_frames_pool, fusion->io_request_frames,
+ fusion->io_request_frames_phys);
+ pci_pool_destroy(fusion->io_request_frames_pool);
+fail_io_frames:
+ dma_free_coherent(&instance->pdev->dev, fusion->request_alloc_sz,
+ fusion->reply_frames_desc,
+ fusion->reply_frames_desc_phys);
+ pci_pool_free(fusion->reply_frames_desc_pool,
+ fusion->reply_frames_desc,
+ fusion->reply_frames_desc_phys);
+ pci_pool_destroy(fusion->reply_frames_desc_pool);
+
+fail_reply_desc:
+ dma_free_coherent(&instance->pdev->dev, fusion->request_alloc_sz,
+ fusion->req_frames_desc,
+ fusion->req_frames_desc_phys);
+fail_req_desc:
+ return -ENOMEM;
+}
+
+/**
+ * wait_and_poll - Issues a polling command
+ * @instance: Adapter soft state
+ * @cmd: Command packet to be issued
+ *
+ * For polling, MFI requires the cmd_status to be set to 0xFF before posting.
+ */
+int
+wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd)
+{
+ int i;
+ struct megasas_header *frame_hdr = &cmd->frame->hdr;
+
+ u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000;
+
+ /*
+ * Wait for cmd_status to change
+ */
+ for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i += 20) {
+ rmb();
+ msleep(20);
+ }
+
+ if (frame_hdr->cmd_status == 0xff)
+ return -ETIME;
+
+ return 0;
+}
+
+/**
+ * megasas_ioc_init_fusion - Initializes the FW
+ * @instance: Adapter soft state
+ *
+ * Issues the IOC Init cmd
+ */
+int
+megasas_ioc_init_fusion(struct megasas_instance *instance)
+{
+ struct megasas_init_frame *init_frame;
+ struct MPI2_IOC_INIT_REQUEST *IOCInitMessage;
+ dma_addr_t ioc_init_handle;
+ u32 context;
+ struct megasas_cmd *cmd;
+ u8 ret;
+ struct fusion_context *fusion;
+ union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+ int i;
+ struct megasas_header *frame_hdr;
+
+ fusion = instance->ctrl_context;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_ERR "Could not allocate cmd for INIT Frame\n");
+ ret = 1;
+ goto fail_get_cmd;
+ }
+
+ IOCInitMessage =
+ dma_alloc_coherent(&instance->pdev->dev,
+ sizeof(struct MPI2_IOC_INIT_REQUEST),
+ &ioc_init_handle, GFP_KERNEL);
+
+ if (!IOCInitMessage) {
+ printk(KERN_ERR "Could not allocate memory for "
+ "IOCInitMessage\n");
+ ret = 1;
+ goto fail_fw_init;
+ }
+
+ memset(IOCInitMessage, 0, sizeof(struct MPI2_IOC_INIT_REQUEST));
+
+ IOCInitMessage->Function = MPI2_FUNCTION_IOC_INIT;
+ IOCInitMessage->WhoInit = MPI2_WHOINIT_HOST_DRIVER;
+ IOCInitMessage->MsgVersion = MPI2_VERSION;
+ IOCInitMessage->HeaderVersion = MPI2_HEADER_VERSION;
+ IOCInitMessage->SystemRequestFrameSize =
+ MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE / 4;
+
+ IOCInitMessage->ReplyDescriptorPostQueueDepth = fusion->reply_q_depth;
+ IOCInitMessage->ReplyDescriptorPostQueueAddress =
+ fusion->reply_frames_desc_phys;
+ IOCInitMessage->SystemRequestFrameBaseAddress =
+ fusion->io_request_frames_phys;
+
+ init_frame = (struct megasas_init_frame *)cmd->frame;
+ memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
+
+ frame_hdr = &cmd->frame->hdr;
+ context = init_frame->context;
+ init_frame->context = context;
+
+ frame_hdr->cmd_status = 0xFF;
+ frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
+
+ init_frame->cmd = MFI_CMD_INIT;
+ init_frame->cmd_status = 0xFF;
+
+ init_frame->queue_info_new_phys_addr_lo = ioc_init_handle;
+ init_frame->data_xfer_len = sizeof(struct MPI2_IOC_INIT_REQUEST);
+
+ req_desc =
+ (union MEGASAS_REQUEST_DESCRIPTOR_UNION *)fusion->req_frames_desc;
+
+ req_desc->Words = cmd->frame_phys_addr;
+ req_desc->MFAIo.RequestFlags =
+ (MEGASAS_REQ_DESCRIPT_FLAGS_MFA <<
+ MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+
+ /*
+ * disable the intr before firing the init frame
+ */
+ instance->instancet->disable_intr(instance->reg_set);
+
+ for (i = 0; i < (10 * 1000); i += 20) {
+ if (readl(&instance->reg_set->doorbell) & 1)
+ msleep(20);
+ else
+ break;
+ }
+
+ instance->instancet->fire_cmd(instance, req_desc->u.low,
+ req_desc->u.high, instance->reg_set);
+
+ wait_and_poll(instance, cmd);
+
+ frame_hdr = &cmd->frame->hdr;
+ if (frame_hdr->cmd_status != 0) {
+ ret = 1;
+ goto fail_fw_init;
+ }
+ printk(KERN_ERR "megasas:IOC Init cmd success\n");
+
+ ret = 0;
+
+fail_fw_init:
+ megasas_return_cmd(instance, cmd);
+ if (IOCInitMessage)
+ dma_free_coherent(&instance->pdev->dev,
+ sizeof(struct MPI2_IOC_INIT_REQUEST),
+ IOCInitMessage, ioc_init_handle);
+fail_get_cmd:
+ return ret;
+}
+
+/*
+ * megasas_return_cmd_for_smid - Returns a cmd_fusion for a SMID
+ * @instance: Adapter soft state
+ *
+ */
+void
+megasas_return_cmd_for_smid(struct megasas_instance *instance, u16 smid)
+{
+ struct fusion_context *fusion;
+ struct megasas_cmd_fusion *cmd;
+
+ fusion = instance->ctrl_context;
+ cmd = fusion->cmd_list[smid - 1];
+ megasas_return_cmd_fusion(instance, cmd);
+}
+
+/*
+ * megasas_get_ld_map_info - Returns FW's ld_map structure
+ * @instance: Adapter soft state
+ * @pend: Pend the command or not
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure. This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+static int
+megasas_get_ld_map_info(struct megasas_instance *instance)
+{
+ int ret = 0;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct MR_FW_RAID_MAP_ALL *ci;
+ dma_addr_t ci_h = 0;
+ u32 size_map_info;
+ struct fusion_context *fusion;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas: Failed to get cmd for map info.\n");
+ return -ENOMEM;
+ }
+
+ fusion = instance->ctrl_context;
+
+ if (!fusion) {
+ megasas_return_cmd(instance, cmd);
+ return 1;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ size_map_info = sizeof(struct MR_FW_RAID_MAP) +
+ (sizeof(struct MR_LD_SPAN_MAP) *(MAX_LOGICAL_DRIVES - 1));
+
+ ci = fusion->ld_map[(instance->map_id & 1)];
+ ci_h = fusion->ld_map_phys[(instance->map_id & 1)];
+
+ if (!ci) {
+ printk(KERN_DEBUG "Failed to alloc mem for ld_map_info\n");
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(ci, 0, sizeof(*ci));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->pad_0 = 0;
+ dcmd->data_xfer_len = size_map_info;
+ dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = size_map_info;
+
+ if (!megasas_issue_polled(instance, cmd))
+ ret = 0;
+ else {
+ printk(KERN_ERR "megasas: Get LD Map Info Failed\n");
+ ret = -1;
+ }
+
+ megasas_return_cmd(instance, cmd);
+
+ return ret;
+}
+
+u8
+megasas_get_map_info(struct megasas_instance *instance)
+{
+ struct fusion_context *fusion = instance->ctrl_context;
+
+ fusion->fast_path_io = 0;
+ if (!megasas_get_ld_map_info(instance)) {
+ if (MR_ValidateMapInfo(fusion->ld_map[(instance->map_id & 1)],
+ fusion->load_balance_info)) {
+ fusion->fast_path_io = 1;
+ return 0;
+ }
+ }
+ return 1;
+}
+
+/*
+ * megasas_sync_map_info - Returns FW's ld_map structure
+ * @instance: Adapter soft state
+ *
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure. This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+int
+megasas_sync_map_info(struct megasas_instance *instance)
+{
+ int ret = 0, i;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ u32 size_sync_info, num_lds;
+ struct fusion_context *fusion;
+ struct MR_LD_TARGET_SYNC *ci = NULL;
+ struct MR_FW_RAID_MAP_ALL *map;
+ struct MR_LD_RAID *raid;
+ struct MR_LD_TARGET_SYNC *ld_sync;
+ dma_addr_t ci_h = 0;
+ u32 size_map_info;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas: Failed to get cmd for sync"
+ "info.\n");
+ return -ENOMEM;
+ }
+
+ fusion = instance->ctrl_context;
+
+ if (!fusion) {
+ megasas_return_cmd(instance, cmd);
+ return 1;
+ }
+
+ map = fusion->ld_map[instance->map_id & 1];
+
+ num_lds = map->raidMap.ldCount;
+
+ dcmd = &cmd->frame->dcmd;
+
+ size_sync_info = sizeof(struct MR_LD_TARGET_SYNC) *num_lds;
+
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ ci = (struct MR_LD_TARGET_SYNC *)
+ fusion->ld_map[(instance->map_id - 1) & 1];
+ memset(ci, 0, sizeof(struct MR_FW_RAID_MAP_ALL));
+
+ ci_h = fusion->ld_map_phys[(instance->map_id - 1) & 1];
+
+ ld_sync = (struct MR_LD_TARGET_SYNC *)ci;
+
+ for (i = 0; i < num_lds; i++, ld_sync++) {
+ raid = MR_LdRaidGet(i, map);
+ ld_sync->targetId = MR_GetLDTgtId(i, map);
+ ld_sync->seqNum = raid->seqNum;
+ }
+
+ size_map_info = sizeof(struct MR_FW_RAID_MAP) +
+ (sizeof(struct MR_LD_SPAN_MAP) *(MAX_LOGICAL_DRIVES - 1));
+
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_WRITE;
+ dcmd->timeout = 0;
+ dcmd->pad_0 = 0;
+ dcmd->data_xfer_len = size_map_info;
+ dcmd->mbox.b[0] = num_lds;
+ dcmd->mbox.b[1] = MEGASAS_DCMD_MBOX_PEND_FLAG;
+ dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = size_map_info;
+
+ instance->map_update_cmd = cmd;
+
+ instance->instancet->issue_dcmd(instance, cmd);
+
+ return ret;
+}
+
+/**
+ * megasas_init_adapter_fusion - Initializes the FW
+ * @instance: Adapter soft state
+ *
+ * This is the main function for initializing firmware.
+ */
+u32
+megasas_init_adapter_fusion(struct megasas_instance *instance)
+{
+ struct megasas_register_set __iomem *reg_set;
+ struct fusion_context *fusion;
+ u32 max_cmd;
+ int i = 0;
+
+ fusion = instance->ctrl_context;
+
+ reg_set = instance->reg_set;
+
+ /*
+ * Get various operational parameters from status register
+ */
+ instance->max_fw_cmds =
+ instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
+ instance->max_fw_cmds = min(instance->max_fw_cmds, (u16)1008);
+
+ /*
+ * Reduce the max supported cmds by 1. This is to ensure that the
+ * reply_q_sz (1 more than the max cmd that driver may send)
+ * does not exceed max cmds that the FW can support
+ */
+ instance->max_fw_cmds = instance->max_fw_cmds-1;
+ /* Only internal cmds (DCMD) need to have MFI frames */
+ instance->max_mfi_cmds = MEGASAS_INT_CMDS;
+
+ max_cmd = instance->max_fw_cmds;
+
+ fusion->reply_q_depth = ((max_cmd + 1 + 15)/16)*16;
+
+ fusion->request_alloc_sz =
+ sizeof(union MEGASAS_REQUEST_DESCRIPTOR_UNION) *max_cmd;
+ fusion->reply_alloc_sz = sizeof(union MPI2_REPLY_DESCRIPTORS_UNION)
+ *(fusion->reply_q_depth);
+ fusion->io_frames_alloc_sz = MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE +
+ (MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE *
+ (max_cmd + 1)); /* Extra 1 for SMID 0 */
+
+ fusion->max_sge_in_main_msg =
+ (MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
+ offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL))/16;
+
+ fusion->max_sge_in_chain =
+ MEGASAS_MAX_SZ_CHAIN_FRAME / sizeof(union MPI2_SGE_IO_UNION);
+
+ instance->max_num_sge = fusion->max_sge_in_main_msg +
+ fusion->max_sge_in_chain - 2;
+
+ /* Used for pass thru MFI frame (DCMD) */
+ fusion->chain_offset_mfi_pthru =
+ offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL)/16;
+
+ fusion->chain_offset_io_request =
+ (MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
+ sizeof(union MPI2_SGE_IO_UNION))/16;
+
+ fusion->last_reply_idx = 0;
+
+ /*
+ * Allocate memory for descriptors
+ * Create a pool of commands
+ */
+ if (megasas_alloc_cmds(instance))
+ goto fail_alloc_mfi_cmds;
+ if (megasas_alloc_cmds_fusion(instance))
+ goto fail_alloc_cmds;
+
+ if (megasas_ioc_init_fusion(instance))
+ goto fail_ioc_init;
+
+ instance->flag_ieee = 1;
+
+ fusion->map_sz = sizeof(struct MR_FW_RAID_MAP) +
+ (sizeof(struct MR_LD_SPAN_MAP) *(MAX_LOGICAL_DRIVES - 1));
+
+ fusion->fast_path_io = 0;
+
+ for (i = 0; i < 2; i++) {
+ fusion->ld_map[i] = dma_alloc_coherent(&instance->pdev->dev,
+ fusion->map_sz,
+ &fusion->ld_map_phys[i],
+ GFP_KERNEL);
+ if (!fusion->ld_map[i]) {
+ printk(KERN_ERR "megasas: Could not allocate memory "
+ "for map info\n");
+ goto fail_map_info;
+ }
+ }
+
+ if (!megasas_get_map_info(instance))
+ megasas_sync_map_info(instance);
+
+ return 0;
+
+fail_alloc_cmds:
+fail_alloc_mfi_cmds:
+fail_map_info:
+ if (i == 1)
+ dma_free_coherent(&instance->pdev->dev, fusion->map_sz,
+ fusion->ld_map[0], fusion->ld_map_phys[0]);
+fail_ioc_init:
+ return 1;
+}
+
+/**
+ * megasas_fire_cmd_fusion - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+void
+megasas_fire_cmd_fusion(struct megasas_instance *instance,
+ dma_addr_t req_desc_lo,
+ u32 req_desc_hi,
+ struct megasas_register_set __iomem *regs)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&instance->hba_lock, flags);
+
+ writel(req_desc_lo,
+ &(regs)->inbound_low_queue_port);
+ writel(req_desc_hi, &(regs)->inbound_high_queue_port);
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+}
+
+/**
+ * map_cmd_status - Maps FW cmd status to OS cmd status
+ * @cmd : Pointer to cmd
+ * @status : status of cmd returned by FW
+ * @ext_status : ext status of cmd returned by FW
+ */
+
+void
+map_cmd_status(struct megasas_cmd_fusion *cmd, u8 status, u8 ext_status)
+{
+
+ switch (status) {
+
+ case MFI_STAT_OK:
+ cmd->scmd->result = DID_OK << 16;
+ break;
+
+ case MFI_STAT_SCSI_IO_FAILED:
+ case MFI_STAT_LD_INIT_IN_PROGRESS:
+ cmd->scmd->result = (DID_ERROR << 16) | ext_status;
+ break;
+
+ case MFI_STAT_SCSI_DONE_WITH_ERROR:
+
+ cmd->scmd->result = (DID_OK << 16) | ext_status;
+ if (ext_status == SAM_STAT_CHECK_CONDITION) {
+ memset(cmd->scmd->sense_buffer, 0,
+ SCSI_SENSE_BUFFERSIZE);
+ memcpy(cmd->scmd->sense_buffer, cmd->sense,
+ SCSI_SENSE_BUFFERSIZE);
+ cmd->scmd->result |= DRIVER_SENSE << 24;
+ }
+ break;
+
+ case MFI_STAT_LD_OFFLINE:
+ case MFI_STAT_DEVICE_NOT_FOUND:
+ cmd->scmd->result = DID_BAD_TARGET << 16;
+ break;
+
+ default:
+ printk(KERN_DEBUG "megasas: FW status %#x\n", status);
+ cmd->scmd->result = DID_ERROR << 16;
+ break;
+ }
+}
+
+/**
+ * megasas_make_sgl_fusion - Prepares 32-bit SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @sgl_ptr: SGL to be filled in
+ * @cmd: cmd we are working on
+ *
+ * If successful, this function returns the number of SG elements.
+ */
+static int
+megasas_make_sgl_fusion(struct megasas_instance *instance,
+ struct scsi_cmnd *scp,
+ struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr,
+ struct megasas_cmd_fusion *cmd)
+{
+ int i, sg_processed;
+ int sge_count, sge_idx;
+ struct scatterlist *os_sgl;
+ struct fusion_context *fusion;
+
+ fusion = instance->ctrl_context;
+
+ cmd->io_request->ChainOffset = 0;
+
+ sge_count = scsi_dma_map(scp);
+
+ BUG_ON(sge_count < 0);
+
+ if (sge_count > instance->max_num_sge || !sge_count)
+ return sge_count;
+
+ if (sge_count > fusion->max_sge_in_main_msg) {
+ /* One element to store the chain info */
+ sge_idx = fusion->max_sge_in_main_msg - 1;
+ } else
+ sge_idx = sge_count;
+
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ sgl_ptr->Length = sg_dma_len(os_sgl);
+ sgl_ptr->Address = sg_dma_address(os_sgl);
+ sgl_ptr->Flags = 0;
+ sgl_ptr++;
+
+ sg_processed = i + 1;
+
+ if ((sg_processed == (fusion->max_sge_in_main_msg - 1)) &&
+ (sge_count > fusion->max_sge_in_main_msg)) {
+
+ struct MPI25_IEEE_SGE_CHAIN64 *sg_chain;
+ cmd->io_request->ChainOffset =
+ fusion->chain_offset_io_request;
+ sg_chain = sgl_ptr;
+ /* Prepare chain element */
+ sg_chain->NextChainOffset = 0;
+ sg_chain->Flags = (IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR);
+ sg_chain->Length = (sizeof(union MPI2_SGE_IO_UNION)
+ *(sge_count - sg_processed));
+ sg_chain->Address = cmd->sg_frame_phys_addr;
+
+ sgl_ptr =
+ (struct MPI25_IEEE_SGE_CHAIN64 *)cmd->sg_frame;
+ }
+ }
+
+ return sge_count;
+}
+
+/**
+ * megasas_set_pd_lba - Sets PD LBA
+ * @cdb: CDB
+ * @cdb_len: cdb length
+ * @start_blk: Start block of IO
+ *
+ * Used to set the PD LBA in CDB for FP IOs
+ */
+void
+megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len,
+ struct IO_REQUEST_INFO *io_info, struct scsi_cmnd *scp,
+ struct MR_FW_RAID_MAP_ALL *local_map_ptr, u32 ref_tag)
+{
+ struct MR_LD_RAID *raid;
+ u32 ld;
+ u64 start_blk = io_info->pdBlock;
+ u8 *cdb = io_request->CDB.CDB32;
+ u32 num_blocks = io_info->numBlocks;
+ u8 opcode, flagvals, groupnum, control;
+
+ /* Check if T10 PI (DIF) is enabled for this LD */
+ ld = MR_TargetIdToLdGet(io_info->ldTgtId, local_map_ptr);
+ raid = MR_LdRaidGet(ld, local_map_ptr);
+ if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER) {
+ memset(cdb, 0, sizeof(io_request->CDB.CDB32));
+ cdb[0] = MEGASAS_SCSI_VARIABLE_LENGTH_CMD;
+ cdb[7] = MEGASAS_SCSI_ADDL_CDB_LEN;
+
+ if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+ cdb[9] = MEGASAS_SCSI_SERVICE_ACTION_READ32;
+ else
+ cdb[9] = MEGASAS_SCSI_SERVICE_ACTION_WRITE32;
+ cdb[10] = MEGASAS_RD_WR_PROTECT_CHECK_ALL;
+
+ /* LBA */
+ cdb[12] = (u8)((start_blk >> 56) & 0xff);
+ cdb[13] = (u8)((start_blk >> 48) & 0xff);
+ cdb[14] = (u8)((start_blk >> 40) & 0xff);
+ cdb[15] = (u8)((start_blk >> 32) & 0xff);
+ cdb[16] = (u8)((start_blk >> 24) & 0xff);
+ cdb[17] = (u8)((start_blk >> 16) & 0xff);
+ cdb[18] = (u8)((start_blk >> 8) & 0xff);
+ cdb[19] = (u8)(start_blk & 0xff);
+
+ /* Logical block reference tag */
+ io_request->CDB.EEDP32.PrimaryReferenceTag =
+ cpu_to_be32(ref_tag);
+ io_request->CDB.EEDP32.PrimaryApplicationTagMask = 0xffff;
+
+ io_request->DataLength = num_blocks * 512;
+ io_request->IoFlags = 32; /* Specify 32-byte cdb */
+
+ /* Transfer length */
+ cdb[28] = (u8)((num_blocks >> 24) & 0xff);
+ cdb[29] = (u8)((num_blocks >> 16) & 0xff);
+ cdb[30] = (u8)((num_blocks >> 8) & 0xff);
+ cdb[31] = (u8)(num_blocks & 0xff);
+
+ /* set SCSI IO EEDPFlags */
+ if (scp->sc_data_direction == PCI_DMA_FROMDEVICE) {
+ io_request->EEDPFlags =
+ MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+ MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
+ MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP |
+ MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG |
+ MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+ } else {
+ io_request->EEDPFlags =
+ MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+ MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
+ }
+ io_request->Control |= (0x4 << 26);
+ io_request->EEDPBlockSize = MEGASAS_EEDPBLOCKSIZE;
+ } else {
+ /* Some drives don't support 16/12 byte CDB's, convert to 10 */
+ if (((cdb_len == 12) || (cdb_len == 16)) &&
+ (start_blk <= 0xffffffff)) {
+ if (cdb_len == 16) {
+ opcode = cdb[0] == READ_16 ? READ_10 : WRITE_10;
+ flagvals = cdb[1];
+ groupnum = cdb[14];
+ control = cdb[15];
+ } else {
+ opcode = cdb[0] == READ_12 ? READ_10 : WRITE_10;
+ flagvals = cdb[1];
+ groupnum = cdb[10];
+ control = cdb[11];
+ }
+
+ memset(cdb, 0, sizeof(io_request->CDB.CDB32));
+
+ cdb[0] = opcode;
+ cdb[1] = flagvals;
+ cdb[6] = groupnum;
+ cdb[9] = control;
+
+ /* Transfer length */
+ cdb[8] = (u8)(num_blocks & 0xff);
+ cdb[7] = (u8)((num_blocks >> 8) & 0xff);
+
+ cdb_len = 10;
+ }
+
+ /* Normal case, just load LBA here */
+ switch (cdb_len) {
+ case 6:
+ {
+ u8 val = cdb[1] & 0xE0;
+ cdb[3] = (u8)(start_blk & 0xff);
+ cdb[2] = (u8)((start_blk >> 8) & 0xff);
+ cdb[1] = val | ((u8)(start_blk >> 16) & 0x1f);
+ break;
+ }
+ case 10:
+ cdb[5] = (u8)(start_blk & 0xff);
+ cdb[4] = (u8)((start_blk >> 8) & 0xff);
+ cdb[3] = (u8)((start_blk >> 16) & 0xff);
+ cdb[2] = (u8)((start_blk >> 24) & 0xff);
+ break;
+ case 12:
+ cdb[5] = (u8)(start_blk & 0xff);
+ cdb[4] = (u8)((start_blk >> 8) & 0xff);
+ cdb[3] = (u8)((start_blk >> 16) & 0xff);
+ cdb[2] = (u8)((start_blk >> 24) & 0xff);
+ break;
+ case 16:
+ cdb[9] = (u8)(start_blk & 0xff);
+ cdb[8] = (u8)((start_blk >> 8) & 0xff);
+ cdb[7] = (u8)((start_blk >> 16) & 0xff);
+ cdb[6] = (u8)((start_blk >> 24) & 0xff);
+ cdb[5] = (u8)((start_blk >> 32) & 0xff);
+ cdb[4] = (u8)((start_blk >> 40) & 0xff);
+ cdb[3] = (u8)((start_blk >> 48) & 0xff);
+ cdb[2] = (u8)((start_blk >> 56) & 0xff);
+ break;
+ }
+ }
+}
+
+/**
+ * megasas_build_ldio_fusion - Prepares IOs to devices
+ * @instance: Adapter soft state
+ * @scp: SCSI command
+ * @cmd: Command to be prepared
+ *
+ * Prepares the io_request and chain elements (sg_frame) for IO
+ * The IO can be for PD (Fast Path) or LD
+ */
+void
+megasas_build_ldio_fusion(struct megasas_instance *instance,
+ struct scsi_cmnd *scp,
+ struct megasas_cmd_fusion *cmd)
+{
+ u8 fp_possible;
+ u32 start_lba_lo, start_lba_hi, device_id;
+ struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
+ union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+ struct IO_REQUEST_INFO io_info;
+ struct fusion_context *fusion;
+ struct MR_FW_RAID_MAP_ALL *local_map_ptr;
+
+ device_id = MEGASAS_DEV_INDEX(instance, scp);
+
+ fusion = instance->ctrl_context;
+
+ io_request = cmd->io_request;
+ io_request->RaidContext.VirtualDiskTgtId = device_id;
+ io_request->RaidContext.status = 0;
+ io_request->RaidContext.exStatus = 0;
+
+ req_desc = (union MEGASAS_REQUEST_DESCRIPTOR_UNION *)cmd->request_desc;
+
+ start_lba_lo = 0;
+ start_lba_hi = 0;
+ fp_possible = 0;
+
+ /*
+ * 6-byte READ(0x08) or WRITE(0x0A) cdb
+ */
+ if (scp->cmd_len == 6) {
+ io_request->DataLength = (u32) scp->cmnd[4];
+ start_lba_lo = ((u32) scp->cmnd[1] << 16) |
+ ((u32) scp->cmnd[2] << 8) | (u32) scp->cmnd[3];
+
+ start_lba_lo &= 0x1FFFFF;
+ }
+
+ /*
+ * 10-byte READ(0x28) or WRITE(0x2A) cdb
+ */
+ else if (scp->cmd_len == 10) {
+ io_request->DataLength = (u32) scp->cmnd[8] |
+ ((u32) scp->cmnd[7] << 8);
+ start_lba_lo = ((u32) scp->cmnd[2] << 24) |
+ ((u32) scp->cmnd[3] << 16) |
+ ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+ }
+
+ /*
+ * 12-byte READ(0xA8) or WRITE(0xAA) cdb
+ */
+ else if (scp->cmd_len == 12) {
+ io_request->DataLength = ((u32) scp->cmnd[6] << 24) |
+ ((u32) scp->cmnd[7] << 16) |
+ ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
+ start_lba_lo = ((u32) scp->cmnd[2] << 24) |
+ ((u32) scp->cmnd[3] << 16) |
+ ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+ }
+
+ /*
+ * 16-byte READ(0x88) or WRITE(0x8A) cdb
+ */
+ else if (scp->cmd_len == 16) {
+ io_request->DataLength = ((u32) scp->cmnd[10] << 24) |
+ ((u32) scp->cmnd[11] << 16) |
+ ((u32) scp->cmnd[12] << 8) | (u32) scp->cmnd[13];
+ start_lba_lo = ((u32) scp->cmnd[6] << 24) |
+ ((u32) scp->cmnd[7] << 16) |
+ ((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
+
+ start_lba_hi = ((u32) scp->cmnd[2] << 24) |
+ ((u32) scp->cmnd[3] << 16) |
+ ((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+ }
+
+ memset(&io_info, 0, sizeof(struct IO_REQUEST_INFO));
+ io_info.ldStartBlock = ((u64)start_lba_hi << 32) | start_lba_lo;
+ io_info.numBlocks = io_request->DataLength;
+ io_info.ldTgtId = device_id;
+
+ if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+ io_info.isRead = 1;
+
+ local_map_ptr = fusion->ld_map[(instance->map_id & 1)];
+
+ if ((MR_TargetIdToLdGet(device_id, local_map_ptr) >=
+ MAX_LOGICAL_DRIVES) || (!fusion->fast_path_io)) {
+ io_request->RaidContext.regLockFlags = 0;
+ fp_possible = 0;
+ } else {
+ if (MR_BuildRaidContext(&io_info, &io_request->RaidContext,
+ local_map_ptr))
+ fp_possible = io_info.fpOkForIo;
+ }
+
+ if (fp_possible) {
+ megasas_set_pd_lba(io_request, scp->cmd_len, &io_info, scp,
+ local_map_ptr, start_lba_lo);
+ io_request->DataLength = scsi_bufflen(scp);
+ io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+ cmd->request_desc->SCSIIO.RequestFlags =
+ (MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY
+ << MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ if ((fusion->load_balance_info[device_id].loadBalanceFlag) &&
+ (io_info.isRead)) {
+ io_info.devHandle =
+ get_updated_dev_handle(
+ &fusion->load_balance_info[device_id],
+ &io_info);
+ scp->SCp.Status |= MEGASAS_LOAD_BALANCE_FLAG;
+ } else
+ scp->SCp.Status &= ~MEGASAS_LOAD_BALANCE_FLAG;
+ cmd->request_desc->SCSIIO.DevHandle = io_info.devHandle;
+ io_request->DevHandle = io_info.devHandle;
+ } else {
+ io_request->RaidContext.timeoutValue =
+ local_map_ptr->raidMap.fpPdIoTimeoutSec;
+ io_request->Function = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
+ io_request->DevHandle = device_id;
+ cmd->request_desc->SCSIIO.RequestFlags =
+ (MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO
+ << MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ } /* Not FP */
+}
+
+/**
+ * megasas_build_dcdb_fusion - Prepares IOs to devices
+ * @instance: Adapter soft state
+ * @scp: SCSI command
+ * @cmd: Command to be prepared
+ *
+ * Prepares the io_request frame for non-io cmds
+ */
+static void
+megasas_build_dcdb_fusion(struct megasas_instance *instance,
+ struct scsi_cmnd *scmd,
+ struct megasas_cmd_fusion *cmd)
+{
+ u32 device_id;
+ struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
+ u16 pd_index = 0;
+ struct MR_FW_RAID_MAP_ALL *local_map_ptr;
+ struct fusion_context *fusion = instance->ctrl_context;
+
+ io_request = cmd->io_request;
+ device_id = MEGASAS_DEV_INDEX(instance, scmd);
+ pd_index = (scmd->device->channel * MEGASAS_MAX_DEV_PER_CHANNEL)
+ +scmd->device->id;
+ local_map_ptr = fusion->ld_map[(instance->map_id & 1)];
+
+ /* Check if this is a system PD I/O */
+ if ((instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) &&
+ (instance->pd_list[pd_index].driveType == TYPE_DISK)) {
+ io_request->Function = 0;
+ io_request->DevHandle =
+ local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
+ io_request->RaidContext.timeoutValue =
+ local_map_ptr->raidMap.fpPdIoTimeoutSec;
+ io_request->RaidContext.regLockFlags = 0;
+ io_request->RaidContext.regLockRowLBA = 0;
+ io_request->RaidContext.regLockLength = 0;
+ io_request->RaidContext.RAIDFlags =
+ MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD <<
+ MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
+ cmd->request_desc->SCSIIO.RequestFlags =
+ (MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY <<
+ MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ } else {
+ io_request->Function = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
+ io_request->DevHandle = device_id;
+ cmd->request_desc->SCSIIO.RequestFlags =
+ (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
+ MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+ }
+ io_request->RaidContext.VirtualDiskTgtId = device_id;
+ io_request->LUN[0] = scmd->device->lun;
+ io_request->DataLength = scsi_bufflen(scmd);
+}
+
+/**
+ * megasas_build_io_fusion - Prepares IOs to devices
+ * @instance: Adapter soft state
+ * @scp: SCSI command
+ * @cmd: Command to be prepared
+ *
+ * Invokes helper functions to prepare request frames
+ * and sets flags appropriate for IO/Non-IO cmd
+ */
+int
+megasas_build_io_fusion(struct megasas_instance *instance,
+ struct scsi_cmnd *scp,
+ struct megasas_cmd_fusion *cmd)
+{
+ u32 device_id, sge_count;
+ struct MPI2_RAID_SCSI_IO_REQUEST *io_request = cmd->io_request;
+
+ device_id = MEGASAS_DEV_INDEX(instance, scp);
+
+ /* Zero out some fields so they don't get reused */
+ io_request->LUN[0] = 0;
+ io_request->CDB.EEDP32.PrimaryReferenceTag = 0;
+ io_request->CDB.EEDP32.PrimaryApplicationTagMask = 0;
+ io_request->EEDPFlags = 0;
+ io_request->Control = 0;
+ io_request->EEDPBlockSize = 0;
+ io_request->IoFlags = 0;
+ io_request->RaidContext.RAIDFlags = 0;
+
+ memcpy(io_request->CDB.CDB32, scp->cmnd, scp->cmd_len);
+ /*
+ * Just the CDB length,rest of the Flags are zero
+ * This will be modified for FP in build_ldio_fusion
+ */
+ io_request->IoFlags = scp->cmd_len;
+
+ if (megasas_is_ldio(scp))
+ megasas_build_ldio_fusion(instance, scp, cmd);
+ else
+ megasas_build_dcdb_fusion(instance, scp, cmd);
+
+ /*
+ * Construct SGL
+ */
+
+ sge_count =
+ megasas_make_sgl_fusion(instance, scp,
+ (struct MPI25_IEEE_SGE_CHAIN64 *)
+ &io_request->SGL, cmd);
+
+ if (sge_count > instance->max_num_sge) {
+ printk(KERN_ERR "megasas: Error. sge_count (0x%x) exceeds "
+ "max (0x%x) allowed\n", sge_count,
+ instance->max_num_sge);
+ return 1;
+ }
+
+ io_request->RaidContext.numSGE = sge_count;
+
+ io_request->SGLFlags = MPI2_SGE_FLAGS_64_BIT_ADDRESSING;
+
+ if (scp->sc_data_direction == PCI_DMA_TODEVICE)
+ io_request->Control |= MPI2_SCSIIO_CONTROL_WRITE;
+ else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+ io_request->Control |= MPI2_SCSIIO_CONTROL_READ;
+
+ io_request->SGLOffset0 =
+ offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL) / 4;
+
+ io_request->SenseBufferLowAddress = cmd->sense_phys_addr;
+ io_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
+
+ cmd->scmd = scp;
+ scp->SCp.ptr = (char *)cmd;
+
+ return 0;
+}
+
+union MEGASAS_REQUEST_DESCRIPTOR_UNION *
+megasas_get_request_descriptor(struct megasas_instance *instance, u16 index)
+{
+ u8 *p;
+ struct fusion_context *fusion;
+
+ if (index >= instance->max_fw_cmds) {
+ printk(KERN_ERR "megasas: Invalid SMID (0x%x)request for "
+ "descriptor\n", index);
+ return NULL;
+ }
+ fusion = instance->ctrl_context;
+ p = fusion->req_frames_desc
+ +sizeof(union MEGASAS_REQUEST_DESCRIPTOR_UNION) *index;
+
+ return (union MEGASAS_REQUEST_DESCRIPTOR_UNION *)p;
+}
+
+/**
+ * megasas_build_and_issue_cmd_fusion -Main routine for building and
+ * issuing non IOCTL cmd
+ * @instance: Adapter soft state
+ * @scmd: pointer to scsi cmd from OS
+ */
+static u32
+megasas_build_and_issue_cmd_fusion(struct megasas_instance *instance,
+ struct scsi_cmnd *scmd)
+{
+ struct megasas_cmd_fusion *cmd;
+ union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+ u32 index;
+ struct fusion_context *fusion;
+
+ fusion = instance->ctrl_context;
+
+ cmd = megasas_get_cmd_fusion(instance);
+ if (!cmd)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ index = cmd->index;
+
+ req_desc = megasas_get_request_descriptor(instance, index-1);
+ if (!req_desc)
+ return 1;
+
+ req_desc->Words = 0;
+ cmd->request_desc = req_desc;
+ cmd->request_desc->Words = 0;
+
+ if (megasas_build_io_fusion(instance, scmd, cmd)) {
+ megasas_return_cmd_fusion(instance, cmd);
+ printk(KERN_ERR "megasas: Error building command.\n");
+ cmd->request_desc = NULL;
+ return 1;
+ }
+
+ req_desc = cmd->request_desc;
+ req_desc->SCSIIO.SMID = index;
+
+ if (cmd->io_request->ChainOffset != 0 &&
+ cmd->io_request->ChainOffset != 0xF)
+ printk(KERN_ERR "megasas: The chain offset value is not "
+ "correct : %x\n", cmd->io_request->ChainOffset);
+
+ /*
+ * Issue the command to the FW
+ */
+ atomic_inc(&instance->fw_outstanding);
+
+ instance->instancet->fire_cmd(instance,
+ req_desc->u.low, req_desc->u.high,
+ instance->reg_set);
+
+ return 0;
+}
+
+/**
+ * complete_cmd_fusion - Completes command
+ * @instance: Adapter soft state
+ * Completes all commands that is in reply descriptor queue
+ */
+int
+complete_cmd_fusion(struct megasas_instance *instance)
+{
+ union MPI2_REPLY_DESCRIPTORS_UNION *desc;
+ struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *reply_desc;
+ struct MPI2_RAID_SCSI_IO_REQUEST *scsi_io_req;
+ struct fusion_context *fusion;
+ struct megasas_cmd *cmd_mfi;
+ struct megasas_cmd_fusion *cmd_fusion;
+ u16 smid, num_completed;
+ u8 reply_descript_type, arm;
+ u32 status, extStatus, device_id;
+ union desc_value d_val;
+ struct LD_LOAD_BALANCE_INFO *lbinfo;
+
+ fusion = instance->ctrl_context;
+
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR)
+ return IRQ_HANDLED;
+
+ desc = fusion->reply_frames_desc;
+ desc += fusion->last_reply_idx;
+
+ reply_desc = (struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *)desc;
+
+ d_val.word = desc->Words;
+
+ reply_descript_type = reply_desc->ReplyFlags &
+ MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+
+ if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
+ return IRQ_NONE;
+
+ d_val.word = desc->Words;
+
+ num_completed = 0;
+
+ while ((d_val.u.low != UINT_MAX) && (d_val.u.high != UINT_MAX)) {
+ smid = reply_desc->SMID;
+
+ cmd_fusion = fusion->cmd_list[smid - 1];
+
+ scsi_io_req =
+ (struct MPI2_RAID_SCSI_IO_REQUEST *)
+ cmd_fusion->io_request;
+
+ if (cmd_fusion->scmd)
+ cmd_fusion->scmd->SCp.ptr = NULL;
+
+ status = scsi_io_req->RaidContext.status;
+ extStatus = scsi_io_req->RaidContext.exStatus;
+
+ switch (scsi_io_req->Function) {
+ case MPI2_FUNCTION_SCSI_IO_REQUEST: /*Fast Path IO.*/
+ /* Update load balancing info */
+ device_id = MEGASAS_DEV_INDEX(instance,
+ cmd_fusion->scmd);
+ lbinfo = &fusion->load_balance_info[device_id];
+ if (cmd_fusion->scmd->SCp.Status &
+ MEGASAS_LOAD_BALANCE_FLAG) {
+ arm = lbinfo->raid1DevHandle[0] ==
+ cmd_fusion->io_request->DevHandle ? 0 :
+ 1;
+ atomic_dec(&lbinfo->scsi_pending_cmds[arm]);
+ cmd_fusion->scmd->SCp.Status &=
+ ~MEGASAS_LOAD_BALANCE_FLAG;
+ }
+ if (reply_descript_type ==
+ MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) {
+ if (megasas_dbg_lvl == 5)
+ printk(KERN_ERR "\nmegasas: FAST Path "
+ "IO Success\n");
+ }
+ /* Fall thru and complete IO */
+ case MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST: /* LD-IO Path */
+ /* Map the FW Cmd Status */
+ map_cmd_status(cmd_fusion, status, extStatus);
+ scsi_dma_unmap(cmd_fusion->scmd);
+ cmd_fusion->scmd->scsi_done(cmd_fusion->scmd);
+ scsi_io_req->RaidContext.status = 0;
+ scsi_io_req->RaidContext.exStatus = 0;
+ megasas_return_cmd_fusion(instance, cmd_fusion);
+ atomic_dec(&instance->fw_outstanding);
+
+ break;
+ case MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST: /*MFI command */
+ cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
+ megasas_complete_cmd(instance, cmd_mfi, DID_OK);
+ cmd_fusion->flags = 0;
+ megasas_return_cmd_fusion(instance, cmd_fusion);
+
+ break;
+ }
+
+ fusion->last_reply_idx++;
+ if (fusion->last_reply_idx >= fusion->reply_q_depth)
+ fusion->last_reply_idx = 0;
+
+ desc->Words = ULLONG_MAX;
+ num_completed++;
+
+ /* Get the next reply descriptor */
+ if (!fusion->last_reply_idx)
+ desc = fusion->reply_frames_desc;
+ else
+ desc++;
+
+ reply_desc =
+ (struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *)desc;
+
+ d_val.word = desc->Words;
+
+ reply_descript_type = reply_desc->ReplyFlags &
+ MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+
+ if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
+ break;
+ }
+
+ if (!num_completed)
+ return IRQ_NONE;
+
+ wmb();
+ writel(fusion->last_reply_idx,
+ &instance->reg_set->reply_post_host_index);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * megasas_complete_cmd_dpc_fusion - Completes command
+ * @instance: Adapter soft state
+ *
+ * Tasklet to complete cmds
+ */
+void
+megasas_complete_cmd_dpc_fusion(unsigned long instance_addr)
+{
+ struct megasas_instance *instance =
+ (struct megasas_instance *)instance_addr;
+ unsigned long flags;
+
+ /* If we have already declared adapter dead, donot complete cmds */
+ spin_lock_irqsave(&instance->hba_lock, flags);
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+ spin_lock_irqsave(&instance->completion_lock, flags);
+ complete_cmd_fusion(instance);
+ spin_unlock_irqrestore(&instance->completion_lock, flags);
+}
+
+/**
+ * megasas_isr_fusion - isr entry point
+ */
+irqreturn_t megasas_isr_fusion(int irq, void *devp)
+{
+ struct megasas_instance *instance = (struct megasas_instance *)devp;
+ u32 mfiStatus, fw_state;
+
+ if (!instance->msi_flag) {
+ mfiStatus = instance->instancet->clear_intr(instance->reg_set);
+ if (!mfiStatus)
+ return IRQ_NONE;
+ }
+
+ /* If we are resetting, bail */
+ if (test_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags))
+ return IRQ_HANDLED;
+
+ if (!complete_cmd_fusion(instance)) {
+ /* If we didn't complete any commands, check for FW fault */
+ fw_state = instance->instancet->read_fw_status_reg(
+ instance->reg_set) & MFI_STATE_MASK;
+ if (fw_state == MFI_STATE_FAULT)
+ schedule_work(&instance->work_init);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * build_mpt_mfi_pass_thru - builds a cmd fo MFI Pass thru
+ * @instance: Adapter soft state
+ * mfi_cmd: megasas_cmd pointer
+ *
+ */
+u8
+build_mpt_mfi_pass_thru(struct megasas_instance *instance,
+ struct megasas_cmd *mfi_cmd)
+{
+ struct MPI25_IEEE_SGE_CHAIN64 *mpi25_ieee_chain;
+ struct MPI2_RAID_SCSI_IO_REQUEST *io_req;
+ struct megasas_cmd_fusion *cmd;
+ struct fusion_context *fusion;
+ struct megasas_header *frame_hdr = &mfi_cmd->frame->hdr;
+
+ cmd = megasas_get_cmd_fusion(instance);
+ if (!cmd)
+ return 1;
+
+ /* Save the smid. To be used for returning the cmd */
+ mfi_cmd->context.smid = cmd->index;
+
+ cmd->sync_cmd_idx = mfi_cmd->index;
+
+ /*
+ * For cmds where the flag is set, store the flag and check
+ * on completion. For cmds with this flag, don't call
+ * megasas_complete_cmd
+ */
+
+ if (frame_hdr->flags & MFI_FRAME_DONT_POST_IN_REPLY_QUEUE)
+ cmd->flags = MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
+
+ fusion = instance->ctrl_context;
+ io_req = cmd->io_request;
+ mpi25_ieee_chain =
+ (struct MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL.IeeeChain;
+
+ io_req->Function = MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST;
+ io_req->SGLOffset0 = offsetof(struct MPI2_RAID_SCSI_IO_REQUEST,
+ SGL) / 4;
+ io_req->ChainOffset = fusion->chain_offset_mfi_pthru;
+
+ mpi25_ieee_chain->Address = mfi_cmd->frame_phys_addr;
+
+ mpi25_ieee_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR;
+
+ mpi25_ieee_chain->Length = MEGASAS_MAX_SZ_CHAIN_FRAME;
+
+ return 0;
+}
+
+/**
+ * build_mpt_cmd - Calls helper function to build a cmd MFI Pass thru cmd
+ * @instance: Adapter soft state
+ * @cmd: mfi cmd to build
+ *
+ */
+union MEGASAS_REQUEST_DESCRIPTOR_UNION *
+build_mpt_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
+{
+ union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+ u16 index;
+
+ if (build_mpt_mfi_pass_thru(instance, cmd)) {
+ printk(KERN_ERR "Couldn't build MFI pass thru cmd\n");
+ return NULL;
+ }
+
+ index = cmd->context.smid;
+
+ req_desc = megasas_get_request_descriptor(instance, index - 1);
+
+ if (!req_desc)
+ return NULL;
+
+ req_desc->Words = 0;
+ req_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
+ MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+
+ req_desc->SCSIIO.SMID = index;
+
+ return req_desc;
+}
+
+/**
+ * megasas_issue_dcmd_fusion - Issues a MFI Pass thru cmd
+ * @instance: Adapter soft state
+ * @cmd: mfi cmd pointer
+ *
+ */
+void
+megasas_issue_dcmd_fusion(struct megasas_instance *instance,
+ struct megasas_cmd *cmd)
+{
+ union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+ union desc_value d_val;
+
+ req_desc = build_mpt_cmd(instance, cmd);
+ if (!req_desc) {
+ printk(KERN_ERR "Couldn't issue MFI pass thru cmd\n");
+ return;
+ }
+ d_val.word = req_desc->Words;
+
+ instance->instancet->fire_cmd(instance, req_desc->u.low,
+ req_desc->u.high, instance->reg_set);
+}
+
+/**
+ * megasas_release_fusion - Reverses the FW initialization
+ * @intance: Adapter soft state
+ */
+void
+megasas_release_fusion(struct megasas_instance *instance)
+{
+ megasas_free_cmds(instance);
+ megasas_free_cmds_fusion(instance);
+
+ iounmap(instance->reg_set);
+
+ pci_release_selected_regions(instance->pdev, instance->bar);
+}
+
+/**
+ * megasas_read_fw_status_reg_fusion - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_fusion(struct megasas_register_set __iomem *regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_adp_reset_fusion - For controller reset
+ * @regs: MFI register set
+ */
+static int
+megasas_adp_reset_fusion(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
+
+/**
+ * megasas_check_reset_fusion - For controller reset check
+ * @regs: MFI register set
+ */
+static int
+megasas_check_reset_fusion(struct megasas_instance *instance,
+ struct megasas_register_set __iomem *regs)
+{
+ return 0;
+}
+
+/* This function waits for outstanding commands on fusion to complete */
+int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance)
+{
+ int i, outstanding, retval = 0;
+ u32 fw_state, wait_time = MEGASAS_RESET_WAIT_TIME;
+
+ for (i = 0; i < wait_time; i++) {
+ /* Check if firmware is in fault state */
+ fw_state = instance->instancet->read_fw_status_reg(
+ instance->reg_set) & MFI_STATE_MASK;
+ if (fw_state == MFI_STATE_FAULT) {
+ printk(KERN_WARNING "megasas: Found FW in FAULT state,"
+ " will reset adapter.\n");
+ retval = 1;
+ goto out;
+ }
+
+ outstanding = atomic_read(&instance->fw_outstanding);
+ if (!outstanding)
+ goto out;
+
+ if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
+ printk(KERN_NOTICE "megasas: [%2d]waiting for %d "
+ "commands to complete\n", i, outstanding);
+ megasas_complete_cmd_dpc_fusion(
+ (unsigned long)instance);
+ }
+ msleep(1000);
+ }
+
+ if (atomic_read(&instance->fw_outstanding)) {
+ printk("megaraid_sas: pending commands remain after waiting, "
+ "will reset adapter.\n");
+ retval = 1;
+ }
+out:
+ return retval;
+}
+
+void megasas_reset_reply_desc(struct megasas_instance *instance)
+{
+ int i;
+ struct fusion_context *fusion;
+ union MPI2_REPLY_DESCRIPTORS_UNION *reply_desc;
+
+ fusion = instance->ctrl_context;
+ fusion->last_reply_idx = 0;
+ reply_desc = fusion->reply_frames_desc;
+ for (i = 0 ; i < fusion->reply_q_depth; i++, reply_desc++)
+ reply_desc->Words = ULLONG_MAX;
+}
+
+/* Core fusion reset function */
+int megasas_reset_fusion(struct Scsi_Host *shost)
+{
+ int retval = SUCCESS, i, j, retry = 0;
+ struct megasas_instance *instance;
+ struct megasas_cmd_fusion *cmd_fusion;
+ struct fusion_context *fusion;
+ struct megasas_cmd *cmd_mfi;
+ union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+ u32 host_diag, abs_state;
+
+ instance = (struct megasas_instance *)shost->hostdata;
+ fusion = instance->ctrl_context;
+
+ mutex_lock(&instance->reset_mutex);
+ set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
+ instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT;
+ instance->instancet->disable_intr(instance->reg_set);
+ msleep(1000);
+
+ if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
+ printk(KERN_WARNING "megaraid_sas: Hardware critical error, "
+ "returning FAILED.\n");
+ retval = FAILED;
+ goto out;
+ }
+
+ /* First try waiting for commands to complete */
+ if (megasas_wait_for_outstanding_fusion(instance)) {
+ printk(KERN_WARNING "megaraid_sas: resetting fusion "
+ "adapter.\n");
+ /* Now return commands back to the OS */
+ for (i = 0 ; i < instance->max_fw_cmds; i++) {
+ cmd_fusion = fusion->cmd_list[i];
+ if (cmd_fusion->scmd) {
+ scsi_dma_unmap(cmd_fusion->scmd);
+ cmd_fusion->scmd->result = (DID_RESET << 16);
+ cmd_fusion->scmd->scsi_done(cmd_fusion->scmd);
+ megasas_return_cmd_fusion(instance, cmd_fusion);
+ atomic_dec(&instance->fw_outstanding);
+ }
+ }
+
+ if (instance->disableOnlineCtrlReset == 1) {
+ /* Reset not supported, kill adapter */
+ printk(KERN_WARNING "megaraid_sas: Reset not supported"
+ ", killing adapter.\n");
+ megaraid_sas_kill_hba(instance);
+ instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+ retval = FAILED;
+ goto out;
+ }
+
+ /* Now try to reset the chip */
+ for (i = 0; i < MEGASAS_FUSION_MAX_RESET_TRIES; i++) {
+ writel(MPI2_WRSEQ_FLUSH_KEY_VALUE,
+ &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_1ST_KEY_VALUE,
+ &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_2ND_KEY_VALUE,
+ &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_3RD_KEY_VALUE,
+ &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_4TH_KEY_VALUE,
+ &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_5TH_KEY_VALUE,
+ &instance->reg_set->fusion_seq_offset);
+ writel(MPI2_WRSEQ_6TH_KEY_VALUE,
+ &instance->reg_set->fusion_seq_offset);
+
+ /* Check that the diag write enable (DRWE) bit is on */
+ host_diag = readl(&instance->reg_set->fusion_host_diag);
+ while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) {
+ msleep(100);
+ host_diag =
+ readl(&instance->reg_set->fusion_host_diag);
+ if (retry++ == 100) {
+ printk(KERN_WARNING "megaraid_sas: "
+ "Host diag unlock failed!\n");
+ break;
+ }
+ }
+ if (!(host_diag & HOST_DIAG_WRITE_ENABLE))
+ continue;
+
+ /* Send chip reset command */
+ writel(host_diag | HOST_DIAG_RESET_ADAPTER,
+ &instance->reg_set->fusion_host_diag);
+ msleep(3000);
+
+ /* Make sure reset adapter bit is cleared */
+ host_diag = readl(&instance->reg_set->fusion_host_diag);
+ retry = 0;
+ while (host_diag & HOST_DIAG_RESET_ADAPTER) {
+ msleep(100);
+ host_diag =
+ readl(&instance->reg_set->fusion_host_diag);
+ if (retry++ == 1000) {
+ printk(KERN_WARNING "megaraid_sas: "
+ "Diag reset adapter never "
+ "cleared!\n");
+ break;
+ }
+ }
+ if (host_diag & HOST_DIAG_RESET_ADAPTER)
+ continue;
+
+ abs_state =
+ instance->instancet->read_fw_status_reg(
+ instance->reg_set);
+ retry = 0;
+
+ while ((abs_state <= MFI_STATE_FW_INIT) &&
+ (retry++ < 1000)) {
+ msleep(100);
+ abs_state =
+ instance->instancet->read_fw_status_reg(
+ instance->reg_set);
+ }
+ if (abs_state <= MFI_STATE_FW_INIT) {
+ printk(KERN_WARNING "megaraid_sas: firmware "
+ "state < MFI_STATE_FW_INIT, state = "
+ "0x%x\n", abs_state);
+ continue;
+ }
+
+ /* Wait for FW to become ready */
+ if (megasas_transition_to_ready(instance)) {
+ printk(KERN_WARNING "megaraid_sas: Failed to "
+ "transition controller to ready.\n");
+ continue;
+ }
+
+ megasas_reset_reply_desc(instance);
+ if (megasas_ioc_init_fusion(instance)) {
+ printk(KERN_WARNING "megaraid_sas: "
+ "megasas_ioc_init_fusion() failed!\n");
+ continue;
+ }
+
+ instance->instancet->enable_intr(instance->reg_set);
+ instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+
+ /* Re-fire management commands */
+ for (j = 0 ; j < instance->max_fw_cmds; j++) {
+ cmd_fusion = fusion->cmd_list[j];
+ if (cmd_fusion->sync_cmd_idx !=
+ (u32)ULONG_MAX) {
+ cmd_mfi =
+ instance->
+ cmd_list[cmd_fusion->sync_cmd_idx];
+ if (cmd_mfi->frame->dcmd.opcode ==
+ MR_DCMD_LD_MAP_GET_INFO) {
+ megasas_return_cmd(instance,
+ cmd_mfi);
+ megasas_return_cmd_fusion(
+ instance, cmd_fusion);
+ } else {
+ req_desc =
+ megasas_get_request_descriptor(
+ instance,
+ cmd_mfi->context.smid
+ -1);
+ if (!req_desc)
+ printk(KERN_WARNING
+ "req_desc NULL"
+ "\n");
+ else {
+ instance->instancet->
+ fire_cmd(instance,
+ req_desc->
+ u.low,
+ req_desc->
+ u.high,
+ instance->
+ reg_set);
+ }
+ }
+ }
+ }
+
+ /* Reset load balance info */
+ memset(fusion->load_balance_info, 0,
+ sizeof(struct LD_LOAD_BALANCE_INFO)
+ *MAX_LOGICAL_DRIVES);
+
+ if (!megasas_get_map_info(instance))
+ megasas_sync_map_info(instance);
+
+ /* Adapter reset completed successfully */
+ printk(KERN_WARNING "megaraid_sas: Reset "
+ "successful.\n");
+ retval = SUCCESS;
+ goto out;
+ }
+ /* Reset failed, kill the adapter */
+ printk(KERN_WARNING "megaraid_sas: Reset failed, killing "
+ "adapter.\n");
+ megaraid_sas_kill_hba(instance);
+ retval = FAILED;
+ } else {
+ instance->instancet->enable_intr(instance->reg_set);
+ instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+ }
+out:
+ clear_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
+ mutex_unlock(&instance->reset_mutex);
+ return retval;
+}
+
+/* Fusion OCR work queue */
+void megasas_fusion_ocr_wq(struct work_struct *work)
+{
+ struct megasas_instance *instance =
+ container_of(work, struct megasas_instance, work_init);
+
+ megasas_reset_fusion(instance->host);
+}
+
+struct megasas_instance_template megasas_instance_template_fusion = {
+ .fire_cmd = megasas_fire_cmd_fusion,
+ .enable_intr = megasas_enable_intr_fusion,
+ .disable_intr = megasas_disable_intr_fusion,
+ .clear_intr = megasas_clear_intr_fusion,
+ .read_fw_status_reg = megasas_read_fw_status_reg_fusion,
+ .adp_reset = megasas_adp_reset_fusion,
+ .check_reset = megasas_check_reset_fusion,
+ .service_isr = megasas_isr_fusion,
+ .tasklet = megasas_complete_cmd_dpc_fusion,
+ .init_adapter = megasas_init_adapter_fusion,
+ .build_and_issue_cmd = megasas_build_and_issue_cmd_fusion,
+ .issue_dcmd = megasas_issue_dcmd_fusion,
+};
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
new file mode 100644
index 000000000000..82b577a72c8b
--- /dev/null
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -0,0 +1,695 @@
+/*
+ * Linux MegaRAID driver for SAS based RAID controllers
+ *
+ * Copyright (c) 2009-2011 LSI Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * FILE: megaraid_sas_fusion.h
+ *
+ * Authors: LSI Corporation
+ * Manoj Jose
+ * Sumant Patro
+ *
+ * Send feedback to: <megaraidlinux@lsi.com>
+ *
+ * Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
+ * ATTN: Linuxraid
+ */
+
+#ifndef _MEGARAID_SAS_FUSION_H_
+#define _MEGARAID_SAS_FUSION_H_
+
+/* Fusion defines */
+#define MEGASAS_MAX_SZ_CHAIN_FRAME 1024
+#define MFI_FUSION_ENABLE_INTERRUPT_MASK (0x00000009)
+#define MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE 256
+#define MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST 0xF0
+#define MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST 0xF1
+#define MEGASAS_LOAD_BALANCE_FLAG 0x1
+#define MEGASAS_DCMD_MBOX_PEND_FLAG 0x1
+#define HOST_DIAG_WRITE_ENABLE 0x80
+#define HOST_DIAG_RESET_ADAPTER 0x4
+#define MEGASAS_FUSION_MAX_RESET_TRIES 3
+
+/* T10 PI defines */
+#define MR_PROT_INFO_TYPE_CONTROLLER 0x8
+#define MEGASAS_SCSI_VARIABLE_LENGTH_CMD 0x7f
+#define MEGASAS_SCSI_SERVICE_ACTION_READ32 0x9
+#define MEGASAS_SCSI_SERVICE_ACTION_WRITE32 0xB
+#define MEGASAS_SCSI_ADDL_CDB_LEN 0x18
+#define MEGASAS_RD_WR_PROTECT_CHECK_ALL 0x20
+#define MEGASAS_RD_WR_PROTECT_CHECK_NONE 0x60
+#define MEGASAS_EEDPBLOCKSIZE 512
+
+/*
+ * Raid context flags
+ */
+
+#define MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT 0x4
+#define MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_MASK 0x30
+enum MR_RAID_FLAGS_IO_SUB_TYPE {
+ MR_RAID_FLAGS_IO_SUB_TYPE_NONE = 0,
+ MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD = 1,
+};
+
+/*
+ * Request descriptor types
+ */
+#define MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO 0x7
+#define MEGASAS_REQ_DESCRIPT_FLAGS_MFA 0x1
+
+#define MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT 1
+
+#define MEGASAS_FP_CMD_LEN 16
+#define MEGASAS_FUSION_IN_RESET 0
+
+/*
+ * Raid Context structure which describes MegaRAID specific IO Paramenters
+ * This resides at offset 0x60 where the SGL normally starts in MPT IO Frames
+ */
+
+struct RAID_CONTEXT {
+ u16 resvd0;
+ u16 timeoutValue;
+ u8 regLockFlags;
+ u8 resvd1;
+ u16 VirtualDiskTgtId;
+ u64 regLockRowLBA;
+ u32 regLockLength;
+ u16 nextLMId;
+ u8 exStatus;
+ u8 status;
+ u8 RAIDFlags;
+ u8 numSGE;
+ u16 configSeqNum;
+ u8 spanArm;
+ u8 resvd2[3];
+};
+
+#define RAID_CTX_SPANARM_ARM_SHIFT (0)
+#define RAID_CTX_SPANARM_ARM_MASK (0x1f)
+
+#define RAID_CTX_SPANARM_SPAN_SHIFT (5)
+#define RAID_CTX_SPANARM_SPAN_MASK (0xE0)
+
+/*
+ * define region lock types
+ */
+enum REGION_TYPE {
+ REGION_TYPE_UNUSED = 0,
+ REGION_TYPE_SHARED_READ = 1,
+ REGION_TYPE_SHARED_WRITE = 2,
+ REGION_TYPE_EXCLUSIVE = 3,
+};
+
+/* MPI2 defines */
+#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */
+#define MPI2_WHOINIT_HOST_DRIVER (0x04)
+#define MPI2_VERSION_MAJOR (0x02)
+#define MPI2_VERSION_MINOR (0x00)
+#define MPI2_VERSION_MAJOR_MASK (0xFF00)
+#define MPI2_VERSION_MAJOR_SHIFT (8)
+#define MPI2_VERSION_MINOR_MASK (0x00FF)
+#define MPI2_VERSION_MINOR_SHIFT (0)
+#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+ MPI2_VERSION_MINOR)
+#define MPI2_HEADER_VERSION_UNIT (0x10)
+#define MPI2_HEADER_VERSION_DEV (0x00)
+#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
+#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
+#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF)
+#define MPI2_HEADER_VERSION_DEV_SHIFT (0)
+#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \
+ MPI2_HEADER_VERSION_DEV)
+#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
+#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
+#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */
+#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
+#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
+#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
+#define MPI2_SCSIIO_CONTROL_READ (0x02000000)
+#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E)
+#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
+#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
+#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0)
+#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004)
+#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF)
+#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4)
+#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB)
+#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2)
+#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7)
+#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD)
+
+struct MPI25_IEEE_SGE_CHAIN64 {
+ u64 Address;
+ u32 Length;
+ u16 Reserved1;
+ u8 NextChainOffset;
+ u8 Flags;
+};
+
+struct MPI2_SGE_SIMPLE_UNION {
+ u32 FlagsLength;
+ union {
+ u32 Address32;
+ u64 Address64;
+ } u;
+};
+
+struct MPI2_SCSI_IO_CDB_EEDP32 {
+ u8 CDB[20]; /* 0x00 */
+ u32 PrimaryReferenceTag; /* 0x14 */
+ u16 PrimaryApplicationTag; /* 0x18 */
+ u16 PrimaryApplicationTagMask; /* 0x1A */
+ u32 TransferLength; /* 0x1C */
+};
+
+struct MPI2_SGE_CHAIN_UNION {
+ u16 Length;
+ u8 NextChainOffset;
+ u8 Flags;
+ union {
+ u32 Address32;
+ u64 Address64;
+ } u;
+};
+
+struct MPI2_IEEE_SGE_SIMPLE32 {
+ u32 Address;
+ u32 FlagsLength;
+};
+
+struct MPI2_IEEE_SGE_CHAIN32 {
+ u32 Address;
+ u32 FlagsLength;
+};
+
+struct MPI2_IEEE_SGE_SIMPLE64 {
+ u64 Address;
+ u32 Length;
+ u16 Reserved1;
+ u8 Reserved2;
+ u8 Flags;
+};
+
+struct MPI2_IEEE_SGE_CHAIN64 {
+ u64 Address;
+ u32 Length;
+ u16 Reserved1;
+ u8 Reserved2;
+ u8 Flags;
+};
+
+union MPI2_IEEE_SGE_SIMPLE_UNION {
+ struct MPI2_IEEE_SGE_SIMPLE32 Simple32;
+ struct MPI2_IEEE_SGE_SIMPLE64 Simple64;
+};
+
+union MPI2_IEEE_SGE_CHAIN_UNION {
+ struct MPI2_IEEE_SGE_CHAIN32 Chain32;
+ struct MPI2_IEEE_SGE_CHAIN64 Chain64;
+};
+
+union MPI2_SGE_IO_UNION {
+ struct MPI2_SGE_SIMPLE_UNION MpiSimple;
+ struct MPI2_SGE_CHAIN_UNION MpiChain;
+ union MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
+ union MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
+};
+
+union MPI2_SCSI_IO_CDB_UNION {
+ u8 CDB32[32];
+ struct MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
+ struct MPI2_SGE_SIMPLE_UNION SGE;
+};
+
+/*
+ * RAID SCSI IO Request Message
+ * Total SGE count will be one less than _MPI2_SCSI_IO_REQUEST
+ */
+struct MPI2_RAID_SCSI_IO_REQUEST {
+ u16 DevHandle; /* 0x00 */
+ u8 ChainOffset; /* 0x02 */
+ u8 Function; /* 0x03 */
+ u16 Reserved1; /* 0x04 */
+ u8 Reserved2; /* 0x06 */
+ u8 MsgFlags; /* 0x07 */
+ u8 VP_ID; /* 0x08 */
+ u8 VF_ID; /* 0x09 */
+ u16 Reserved3; /* 0x0A */
+ u32 SenseBufferLowAddress; /* 0x0C */
+ u16 SGLFlags; /* 0x10 */
+ u8 SenseBufferLength; /* 0x12 */
+ u8 Reserved4; /* 0x13 */
+ u8 SGLOffset0; /* 0x14 */
+ u8 SGLOffset1; /* 0x15 */
+ u8 SGLOffset2; /* 0x16 */
+ u8 SGLOffset3; /* 0x17 */
+ u32 SkipCount; /* 0x18 */
+ u32 DataLength; /* 0x1C */
+ u32 BidirectionalDataLength; /* 0x20 */
+ u16 IoFlags; /* 0x24 */
+ u16 EEDPFlags; /* 0x26 */
+ u32 EEDPBlockSize; /* 0x28 */
+ u32 SecondaryReferenceTag; /* 0x2C */
+ u16 SecondaryApplicationTag; /* 0x30 */
+ u16 ApplicationTagTranslationMask; /* 0x32 */
+ u8 LUN[8]; /* 0x34 */
+ u32 Control; /* 0x3C */
+ union MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */
+ struct RAID_CONTEXT RaidContext; /* 0x60 */
+ union MPI2_SGE_IO_UNION SGL; /* 0x80 */
+};
+
+/*
+ * MPT RAID MFA IO Descriptor.
+ */
+struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR {
+ u32 RequestFlags:8;
+ u32 MessageAddress1:24; /* bits 31:8*/
+ u32 MessageAddress2; /* bits 61:32 */
+};
+
+/* Default Request Descriptor */
+struct MPI2_DEFAULT_REQUEST_DESCRIPTOR {
+ u8 RequestFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 SMID; /* 0x02 */
+ u16 LMID; /* 0x04 */
+ u16 DescriptorTypeDependent; /* 0x06 */
+};
+
+/* High Priority Request Descriptor */
+struct MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR {
+ u8 RequestFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 SMID; /* 0x02 */
+ u16 LMID; /* 0x04 */
+ u16 Reserved1; /* 0x06 */
+};
+
+/* SCSI IO Request Descriptor */
+struct MPI2_SCSI_IO_REQUEST_DESCRIPTOR {
+ u8 RequestFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 SMID; /* 0x02 */
+ u16 LMID; /* 0x04 */
+ u16 DevHandle; /* 0x06 */
+};
+
+/* SCSI Target Request Descriptor */
+struct MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR {
+ u8 RequestFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 SMID; /* 0x02 */
+ u16 LMID; /* 0x04 */
+ u16 IoIndex; /* 0x06 */
+};
+
+/* RAID Accelerator Request Descriptor */
+struct MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
+ u8 RequestFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 SMID; /* 0x02 */
+ u16 LMID; /* 0x04 */
+ u16 Reserved; /* 0x06 */
+};
+
+/* union of Request Descriptors */
+union MEGASAS_REQUEST_DESCRIPTOR_UNION {
+ struct MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
+ struct MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
+ struct MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
+ struct MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
+ struct MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
+ struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR MFAIo;
+ union {
+ struct {
+ u32 low;
+ u32 high;
+ } u;
+ u64 Words;
+ };
+};
+
+/* Default Reply Descriptor */
+struct MPI2_DEFAULT_REPLY_DESCRIPTOR {
+ u8 ReplyFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 DescriptorTypeDependent1; /* 0x02 */
+ u32 DescriptorTypeDependent2; /* 0x04 */
+};
+
+/* Address Reply Descriptor */
+struct MPI2_ADDRESS_REPLY_DESCRIPTOR {
+ u8 ReplyFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 SMID; /* 0x02 */
+ u32 ReplyFrameAddress; /* 0x04 */
+};
+
+/* SCSI IO Success Reply Descriptor */
+struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR {
+ u8 ReplyFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 SMID; /* 0x02 */
+ u16 TaskTag; /* 0x04 */
+ u16 Reserved1; /* 0x06 */
+};
+
+/* TargetAssist Success Reply Descriptor */
+struct MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR {
+ u8 ReplyFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 SMID; /* 0x02 */
+ u8 SequenceNumber; /* 0x04 */
+ u8 Reserved1; /* 0x05 */
+ u16 IoIndex; /* 0x06 */
+};
+
+/* Target Command Buffer Reply Descriptor */
+struct MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR {
+ u8 ReplyFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u8 VP_ID; /* 0x02 */
+ u8 Flags; /* 0x03 */
+ u16 InitiatorDevHandle; /* 0x04 */
+ u16 IoIndex; /* 0x06 */
+};
+
+/* RAID Accelerator Success Reply Descriptor */
+struct MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
+ u8 ReplyFlags; /* 0x00 */
+ u8 MSIxIndex; /* 0x01 */
+ u16 SMID; /* 0x02 */
+ u32 Reserved; /* 0x04 */
+};
+
+/* union of Reply Descriptors */
+union MPI2_REPLY_DESCRIPTORS_UNION {
+ struct MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
+ struct MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
+ struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
+ struct MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
+ struct MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
+ struct MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
+ RAIDAcceleratorSuccess;
+ u64 Words;
+};
+
+/* IOCInit Request message */
+struct MPI2_IOC_INIT_REQUEST {
+ u8 WhoInit; /* 0x00 */
+ u8 Reserved1; /* 0x01 */
+ u8 ChainOffset; /* 0x02 */
+ u8 Function; /* 0x03 */
+ u16 Reserved2; /* 0x04 */
+ u8 Reserved3; /* 0x06 */
+ u8 MsgFlags; /* 0x07 */
+ u8 VP_ID; /* 0x08 */
+ u8 VF_ID; /* 0x09 */
+ u16 Reserved4; /* 0x0A */
+ u16 MsgVersion; /* 0x0C */
+ u16 HeaderVersion; /* 0x0E */
+ u32 Reserved5; /* 0x10 */
+ u16 Reserved6; /* 0x14 */
+ u8 Reserved7; /* 0x16 */
+ u8 HostMSIxVectors; /* 0x17 */
+ u16 Reserved8; /* 0x18 */
+ u16 SystemRequestFrameSize; /* 0x1A */
+ u16 ReplyDescriptorPostQueueDepth; /* 0x1C */
+ u16 ReplyFreeQueueDepth; /* 0x1E */
+ u32 SenseBufferAddressHigh; /* 0x20 */
+ u32 SystemReplyAddressHigh; /* 0x24 */
+ u64 SystemRequestFrameBaseAddress; /* 0x28 */
+ u64 ReplyDescriptorPostQueueAddress;/* 0x30 */
+ u64 ReplyFreeQueueAddress; /* 0x38 */
+ u64 TimeStamp; /* 0x40 */
+};
+
+/* mrpriv defines */
+#define MR_PD_INVALID 0xFFFF
+#define MAX_SPAN_DEPTH 8
+#define MAX_RAIDMAP_SPAN_DEPTH (MAX_SPAN_DEPTH)
+#define MAX_ROW_SIZE 32
+#define MAX_RAIDMAP_ROW_SIZE (MAX_ROW_SIZE)
+#define MAX_LOGICAL_DRIVES 64
+#define MAX_RAIDMAP_LOGICAL_DRIVES (MAX_LOGICAL_DRIVES)
+#define MAX_RAIDMAP_VIEWS (MAX_LOGICAL_DRIVES)
+#define MAX_ARRAYS 128
+#define MAX_RAIDMAP_ARRAYS (MAX_ARRAYS)
+#define MAX_PHYSICAL_DEVICES 256
+#define MAX_RAIDMAP_PHYSICAL_DEVICES (MAX_PHYSICAL_DEVICES)
+#define MR_DCMD_LD_MAP_GET_INFO 0x0300e101
+
+struct MR_DEV_HANDLE_INFO {
+ u16 curDevHdl;
+ u8 validHandles;
+ u8 reserved;
+ u16 devHandle[2];
+};
+
+struct MR_ARRAY_INFO {
+ u16 pd[MAX_RAIDMAP_ROW_SIZE];
+};
+
+struct MR_QUAD_ELEMENT {
+ u64 logStart;
+ u64 logEnd;
+ u64 offsetInSpan;
+ u32 diff;
+ u32 reserved1;
+};
+
+struct MR_SPAN_INFO {
+ u32 noElements;
+ u32 reserved1;
+ struct MR_QUAD_ELEMENT quad[MAX_RAIDMAP_SPAN_DEPTH];
+};
+
+struct MR_LD_SPAN {
+ u64 startBlk;
+ u64 numBlks;
+ u16 arrayRef;
+ u8 reserved[6];
+};
+
+struct MR_SPAN_BLOCK_INFO {
+ u64 num_rows;
+ struct MR_LD_SPAN span;
+ struct MR_SPAN_INFO block_span_info;
+};
+
+struct MR_LD_RAID {
+ struct {
+ u32 fpCapable:1;
+ u32 reserved5:3;
+ u32 ldPiMode:4;
+ u32 pdPiMode:4;
+ u32 encryptionType:8;
+ u32 fpWriteCapable:1;
+ u32 fpReadCapable:1;
+ u32 fpWriteAcrossStripe:1;
+ u32 fpReadAcrossStripe:1;
+ u32 reserved4:8;
+ } capability;
+ u32 reserved6;
+ u64 size;
+ u8 spanDepth;
+ u8 level;
+ u8 stripeShift;
+ u8 rowSize;
+ u8 rowDataSize;
+ u8 writeMode;
+ u8 PRL;
+ u8 SRL;
+ u16 targetId;
+ u8 ldState;
+ u8 regTypeReqOnWrite;
+ u8 modFactor;
+ u8 reserved2[1];
+ u16 seqNum;
+
+ struct {
+ u32 ldSyncRequired:1;
+ u32 reserved:31;
+ } flags;
+
+ u8 reserved3[0x5C];
+};
+
+struct MR_LD_SPAN_MAP {
+ struct MR_LD_RAID ldRaid;
+ u8 dataArmMap[MAX_RAIDMAP_ROW_SIZE];
+ struct MR_SPAN_BLOCK_INFO spanBlock[MAX_RAIDMAP_SPAN_DEPTH];
+};
+
+struct MR_FW_RAID_MAP {
+ u32 totalSize;
+ union {
+ struct {
+ u32 maxLd;
+ u32 maxSpanDepth;
+ u32 maxRowSize;
+ u32 maxPdCount;
+ u32 maxArrays;
+ } validationInfo;
+ u32 version[5];
+ u32 reserved1[5];
+ };
+
+ u32 ldCount;
+ u32 Reserved1;
+ u8 ldTgtIdToLd[MAX_RAIDMAP_LOGICAL_DRIVES+
+ MAX_RAIDMAP_VIEWS];
+ u8 fpPdIoTimeoutSec;
+ u8 reserved2[7];
+ struct MR_ARRAY_INFO arMapInfo[MAX_RAIDMAP_ARRAYS];
+ struct MR_DEV_HANDLE_INFO devHndlInfo[MAX_RAIDMAP_PHYSICAL_DEVICES];
+ struct MR_LD_SPAN_MAP ldSpanMap[1];
+};
+
+struct IO_REQUEST_INFO {
+ u64 ldStartBlock;
+ u32 numBlocks;
+ u16 ldTgtId;
+ u8 isRead;
+ u16 devHandle;
+ u64 pdBlock;
+ u8 fpOkForIo;
+};
+
+struct MR_LD_TARGET_SYNC {
+ u8 targetId;
+ u8 reserved;
+ u16 seqNum;
+};
+
+#define IEEE_SGE_FLAGS_ADDR_MASK (0x03)
+#define IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00)
+#define IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01)
+#define IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02)
+#define IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
+#define IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80)
+#define IEEE_SGE_FLAGS_END_OF_LIST (0x40)
+
+struct megasas_register_set;
+struct megasas_instance;
+
+union desc_word {
+ u64 word;
+ struct {
+ u32 low;
+ u32 high;
+ } u;
+};
+
+struct megasas_cmd_fusion {
+ struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
+ dma_addr_t io_request_phys_addr;
+
+ union MPI2_SGE_IO_UNION *sg_frame;
+ dma_addr_t sg_frame_phys_addr;
+
+ u8 *sense;
+ dma_addr_t sense_phys_addr;
+
+ struct list_head list;
+ struct scsi_cmnd *scmd;
+ struct megasas_instance *instance;
+
+ u8 retry_for_fw_reset;
+ union MEGASAS_REQUEST_DESCRIPTOR_UNION *request_desc;
+
+ /*
+ * Context for a MFI frame.
+ * Used to get the mfi cmd from list when a MFI cmd is completed
+ */
+ u32 sync_cmd_idx;
+ u32 index;
+ u8 flags;
+};
+
+struct LD_LOAD_BALANCE_INFO {
+ u8 loadBalanceFlag;
+ u8 reserved1;
+ u16 raid1DevHandle[2];
+ atomic_t scsi_pending_cmds[2];
+ u64 last_accessed_block[2];
+};
+
+struct MR_FW_RAID_MAP_ALL {
+ struct MR_FW_RAID_MAP raidMap;
+ struct MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES - 1];
+} __attribute__ ((packed));
+
+struct fusion_context {
+ struct megasas_cmd_fusion **cmd_list;
+ struct list_head cmd_pool;
+
+ spinlock_t cmd_pool_lock;
+
+ dma_addr_t req_frames_desc_phys;
+ u8 *req_frames_desc;
+
+ struct dma_pool *io_request_frames_pool;
+ dma_addr_t io_request_frames_phys;
+ u8 *io_request_frames;
+
+ struct dma_pool *sg_dma_pool;
+ struct dma_pool *sense_dma_pool;
+
+ dma_addr_t reply_frames_desc_phys;
+ union MPI2_REPLY_DESCRIPTORS_UNION *reply_frames_desc;
+ struct dma_pool *reply_frames_desc_pool;
+
+ u16 last_reply_idx;
+
+ u32 reply_q_depth;
+ u32 request_alloc_sz;
+ u32 reply_alloc_sz;
+ u32 io_frames_alloc_sz;
+
+ u16 max_sge_in_main_msg;
+ u16 max_sge_in_chain;
+
+ u8 chain_offset_io_request;
+ u8 chain_offset_mfi_pthru;
+
+ struct MR_FW_RAID_MAP_ALL *ld_map[2];
+ dma_addr_t ld_map_phys[2];
+
+ u32 map_sz;
+ u8 fast_path_io;
+ struct LD_LOAD_BALANCE_INFO load_balance_info[MAX_LOGICAL_DRIVES];
+};
+
+union desc_value {
+ u64 word;
+ struct {
+ u32 low;
+ u32 high;
+ } u;
+};
+
+#endif /* _MEGARAID_SAS_FUSION_H_ */
--
1.7.10.rc1
Reply to: