[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#496188: marked as done (linux-image-2.6.26-1-openvz-amd64: usbserial doesn't work anymore - Call, Trace)



Your message dated Thu, 29 Mar 2012 12:39:44 -0500
with message-id <20120329173944.GE3147@burratino>
and subject line Re: Closed #496188 appear again in 2.6.26-12 SID and Lenny
has caused the Debian Bug report #496188,
regarding linux-image-2.6.26-1-openvz-amd64: usbserial doesn't work anymore - Call, Trace
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
496188: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=496188
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-1-openvz-amd64
Version: 2.6.26-3
Severity: grave
Justification: renders package unusable


I'm using an USB key modem for my Internet connection. Since the last kernel upgrade I'm not anymore able to connect. See the attached call trace.

--
Daniel

-- Package-specific info:
** Version:
Linux version 2.6.26-1-openvz-amd64 (Debian 2.6.26-3) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20 13:06:07 UTC 2008

** Command line:
root=/dev/mapper/vg0-Dom0 ro vga=791 quiet

** Tainted: G W (512)

** Kernel log:
[41357.403851]    domain 2: span 0-1
[41357.403854]     groups: 0-1
[41357.447643] Switched to high resolution mode on CPU 1
[41357.451634] CPU1 is up
[41357.513948] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[41357.513948] PCI: Setting latency timer of device 0000:00:02.0 to 64
[41357.531027] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [41357.531061] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[41357.531073] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[41357.531185] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[41357.531282] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[41357.531296] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[41357.531306] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[41357.531370] usb usb1: root hub lost power or was reset
[41357.531395] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[41357.531405] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[41357.531467] usb usb2: root hub lost power or was reset
[41357.531491] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[41357.531500] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[41357.531564] usb usb3: root hub lost power or was reset
[41357.531586] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
[41357.531596] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[41357.531658] usb usb4: root hub lost power or was reset
[41357.531693] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[41357.531703] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[41357.531765] usb usb5: root hub lost power or was reset
[41357.535640] ehci_hcd 0000:00:1d.7: debug port 1
[41357.535649] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[41357.535716] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[41357.535820] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b80001, writing 2b80005) [41357.535847] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[41357.535857] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[41357.535839] ata2.00: _GTF evaluation failed (AE 0x1001)
[41357.551042] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [41357.590984] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [41357.591026] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100102, writing 100106)
[41357.615045] Registered led device: iwl-phy2:radio
[41357.615120] Registered led device: iwl-phy2:assoc
[41357.615157] Registered led device: iwl-phy2:RX
[41357.615189] Registered led device: iwl-phy2:TX
[41357.616382] wlan0: Initial auth_alg=0
[41357.616394] wlan0: authenticate with AP 00:0f:66:d9:ec:a5
[41357.618946] wlan0: RX authentication from 00:0f:66:d9:ec:a5 (alg=0 transaction=2 status=0)
[41357.618952] wlan0: authenticated
[41357.618957] wlan0: associate with AP 00:0f:66:d9:ec:a5
[41357.621249] wlan0: RX ReassocResp from 00:0f:66:d9:ec:a5 (capab=0x411 status=0 aid=1)
[41357.621256] wlan0: associated
[41357.679101] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4]
[41357.700940] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[41357.704972] PM: Writing back config space on device 0000:03:01.1 at offset 4 (was 0, writing ef9fd500) [41357.704979] PM: Writing back config space on device 0000:03:01.1 at offset 3 (was 800000, writing 804000) [41357.704987] PM: Writing back config space on device 0000:03:01.1 at offset 1 (was 2100000, writing 2100106) [41357.705006] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18 [41357.706048] PM: Writing back config space on device 0000:03:01.2 at offset 4 (was ef9fd500, writing ef9fd600) [41357.706057] PM: Writing back config space on device 0000:03:01.2 at offset 1 (was 2100106, writing 2100102) [41357.706095] PM: Writing back config space on device 0000:03:01.3 at offset 4 (was ef9fd600, writing ef9fd700)
[41357.715757] ata2.00: configured for UDMA/33
[41357.716046] ata1.00: configured for UDMA/100
[41357.716097] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[41357.716116] sd 0:0:0:0: [sda] Write Protect is off
[41357.716119] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[41357.716151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[41359.156988] sd 0:0:0:0: [sda] Starting disk
[41359.185776] PCI: Setting latency timer of device 0000:00:02.0 to 64
[41359.190136] hub 4-2:1.0: hub_port_status failed (err = -71)
[41359.192807] hub 4-2:1.0: hub_port_status failed (err = -71)
[41359.193750] hub 4-2:1.0: hub_port_status failed (err = -71)
[41359.322758] Restarting tasks ... <6>usb 4-2: USB disconnect, address 6
[41359.326309] usb 4-2.1: USB disconnect, address 7
[41359.328841] done.
[41359.588590] usb 4-2.2: USB disconnect, address 8
[41359.617128] usb 4-2.3: USB disconnect, address 9
[41359.884453] usb 4-2: new full speed USB device using uhci_hcd and address 10
[41360.077368] usb 4-2: configuration #1 chosen from 1 choice
[41360.079756] hub 4-2:1.0: USB hub found
[41360.081292] hub 4-2:1.0: 3 ports detected
[41360.190429] usb 4-2: New USB device found, idVendor=0a5c, idProduct=4500
[41360.190437] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[41360.190443] usb 4-2: Product: BCM2045B2
[41360.190447] usb 4-2: Manufacturer: Broadcom
[41360.515922] usb 4-2.1: new full speed USB device using uhci_hcd and address 11
[41360.645458] usb 4-2.1: configuration #1 chosen from 1 choice
[41360.648385] usb 4-2.1: New USB device found, idVendor=413c, idProduct=8126 [41360.648385] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[41360.648385] usb 4-2.1: Product: BCM2045
[41360.648385] usb 4-2.1: Manufacturer: Broadcom Corp
[41360.854730] usb 4-2.2: new full speed USB device using uhci_hcd and address 12
[41360.982534] usb 4-2.2: configuration #1 chosen from 1 choice
[41360.989253] input: Broadcom Corp as /class/input/input14
[41361.014612] input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.3-2.2 [41361.014707] usb 4-2.2: New USB device found, idVendor=0a5c, idProduct=4502 [41361.014711] usb 4-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[41361.014714] usb 4-2.2: Manufacturer: Broadcom Corp
[41361.222866] usb 4-2.3: new full speed USB device using uhci_hcd and address 13
[41361.357765] usb 4-2.3: configuration #1 chosen from 1 choice
[41361.364791] input: Broadcom Corp as /class/input/input15
[41361.394288] input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.3-2.3 [41361.394385] usb 4-2.3: New USB device found, idVendor=0a5c, idProduct=4503 [41361.394388] usb 4-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[41361.394392] usb 4-2.3: Manufacturer: Broadcom Corp

** Loaded modules:
Module                  Size  Used by
iwl3945                93044  0
option                 17408  0
usbserial              36720  1 option
usb_storage            94144  0
usbkbd                 10112  0
usbmouse                8704  0
tun                    15492  0
i915                   35200  2
drm                    91360  3 i915
binfmt_misc            13964  1
rfcomm                 38304  7
hidp                   19072  2
l2cap                  23808  14 rfcomm,hidp
vzethdev               14592  0
vznetdev               24456  2
simfs                   8944  1
vzdquota               42868  1 [permanent]
vzmon                  31248  3 vzethdev,vznetdev
vzdev                   7568  4 vzethdev,vznetdev,vzdquota,vzmon
xt_tcpudp               7680  0
xt_length               6400  0
ipt_ttl                 6144  0
xt_tcpmss               6656  0
xt_TCPMSS               8576  0
iptable_mangle          8704  0
iptable_filter          8320  0
xt_multiport            7424  0
xt_limit                7172  0
xt_dscp                 7168  0
ipt_REJECT              7552  0
ip_tables              21776  2 iptable_mangle,iptable_filter
x_tables 25736 10 xt_tcpudp,xt_length,ipt_ttl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,ip_tables
ppdev                  11784  0
lp                     14724  0
parport                41776  2 ppdev,lp
ipv6                  296128  40 vzmon
snd_atiixp_modem       17292  0
snd_via82xx_modem      16396  0
snd_intel8x0m          19216  0
snd_ac97_codec 115416 3 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m
ac97_bus                6272  1 snd_ac97_codec
cpufreq_stats           9120  0
cpufreq_ondemand       11792  1
cpufreq_powersave       6400  0
cpufreq_conservative    11784  0
cpufreq_userspace       8452  0
auth_rpcgss            47520  0
exportfs                8832  0
lockd                  68560  0
nfs_acl                 7552  0
sunrpc                198632  6 auth_rpcgss,lockd,nfs_acl
isofs                  35752  1
zlib_inflate           18944  1 isofs
udf                    75944  0
crc_itu_t               6528  1 udf
ext3                  124432  1
jbd                    51240  1 ext3
mbcache                12804  1 ext3
nls_utf8                6272  2
nls_cp437              11136  1
vfat                   14976  1
fat                    51128  1 vfat
nls_base               12932  6 isofs,udf,nls_utf8,nls_cp437,vfat,fat
kvm_intel              39520  0
kvm                   126952  1 kvm_intel
snd_seq                54304  0
snd_seq_device         11668  1 snd_seq
acpi_cpufreq           11792  1
freq_table              9344  3 cpufreq_stats,cpufreq_ondemand,acpi_cpufreq
sbp2                   25356  0
loop                   19340  0
joydev                 14848  0
arc4                    6272  2
ecb                     7296  2
crypto_blkcipher       21636  1 ecb
iTCO_wdt               15696  0
serio_raw               9988  0
mac80211              163120  1 iwl3945
hci_usb                18460  2
psmouse                42268  0
i2c_i801               13596  0
led_class               8968  1 iwl3945
pcspkr                  7040  0
rng_core                9096  0
bluetooth              57124  8 rfcomm,hidp,l2cap,hci_usb
snd_hda_intel         434776  0
video                  24084  0
output                  7808  1 video
cfg80211               30224  2 iwl3945,mac80211
intelfb                38184  0
wmi                    11712  0
button                 11680  0
snd_pcm 81928 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel
snd_timer              25744  2 snd_seq,snd_pcm
snd 63688 9 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer
soundcore              12064  1 snd
snd_page_alloc 13072 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm
battery                12032  0
ac                      8192  0
intel_agp              31600  1
i2c_algo_bit           10244  1 intelfb
i2c_core               27936  3 i2c_i801,intelfb,i2c_algo_bit
evdev                  14208  11
dcdbas                 11952  0
xfs                   475304  5
dm_mirror              20608  0
dm_log                 13956  1 dm_mirror
dm_snapshot            19400  0
dm_mod                 58864  20 dm_mirror,dm_log,dm_snapshot
usbhid                 45920  0
hid                    41792  2 hidp,usbhid
ff_memless              9224  1 usbhid
sg                     36448  0
sr_mod                 19780  1
sd_mod                 29376  4
cdrom                  37928  1 sr_mod
ata_generic            10116  0
ata_piix               22660  4
libata                165472  2 ata_generic,ata_piix
scsi_mod              160888  6 usb_storage,sbp2,sg,sr_mod,sd_mod,libata
dock                   14112  1 libata
b44                    29968  0
ide_pci_generic         9220  0 [permanent]
ide_core              128156  1 ide_pci_generic
ohci1394               32564  0
sdhci                  19460  0
ieee1394               93944  2 sbp2,ohci1394
ssb                    43140  1 b44
pcmcia                 38680  1 ssb
mmc_core               52448  1 sdhci
pcmcia_core            41508  2 ssb,pcmcia
firmware_class         12544  2 iwl3945,pcmcia
mii                     9856  1 b44
ehci_hcd               36108  0
uhci_hcd               25760  0
thermal                22688  0
processor              42304  4 acpi_cpufreq,thermal
fan                     9352  0
thermal_sys            17728  4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
	Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information <?>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
	Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at eff8 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
	Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
	Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [130] Root Complex Link <?>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
	Memory behind bridge: efd00000-efdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
			Slot #  2, PowerLimit 6.500000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: fee0300c  Data: 4159
	Capabilities: [90] Subsystem: Dell Device [1028:01bd]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: efa00000-efcfffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag- RBE- FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
			Slot #  5, PowerLimit 6.500000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: fee0300c  Data: 4161
	Capabilities: [90] Subsystem: Dell Device [1028:01bd]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
	Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at bf80 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
	Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at bf60 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
	Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 4: I/O ports at bf40 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
	Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 23
	Region 4: I/O ports at bf20 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
	Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	Memory behind bridge: ef900000-ef9fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: Dell Device [1028:01bd]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
	Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information <?>
	Kernel modules: iTCO_wdt, intel-rng

00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master])
	Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at bfa0 [size=16]
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ata_piix
	Kernel modules: ide-pci-generic, ata_piix, ata_generic

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
	Subsystem: Dell Device [1028:01bd]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at 10c0 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
	Subsystem: Dell Device [1028:01af]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: b44
	Kernel modules: b44

03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10)
	Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME+
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) (prog-if 01)
	Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin B routed to IRQ 18
	Region 0: Memory at ef9fd500 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: sdhci
	Kernel modules: sdhci

03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 01)
	Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 0a)
	Subsystem: Dell Device [1028:01bd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at ef9fd700 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

0b:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
	Subsystem: Intel Corporation Device [8086:1021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 1277
	Region 0: Memory at efdff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
		Address: 00000000fee0300c  Data: 4192
	Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
			ClockPM+ Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [140] Device Serial Number 65-3a-3d-ff-ff-d2-19-00
	Kernel driver in use: iwl3945
	Kernel modules: iwl3945



-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-1-openvz-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-openvz-amd64 depends on:
ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo ii vzctl 3.0.22-11 server virtualization solution - c

linux-image-2.6.26-1-openvz-amd64 recommends no packages.

Versions of packages linux-image-2.6.26-1-openvz-amd64 suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26              <none>     (no description available)

-- debconf information:

linux-image-2.6.26-1-openvz-amd64/preinst/overwriting-modules-2.6.26-1-openvz-amd64: true

linux-image-2.6.26-1-openvz-amd64/postinst/bootloader-test-error-2.6.26-1-openvz-amd64:

linux-image-2.6.26-1-openvz-amd64/postinst/bootloader-error-2.6.26-1-openvz-amd64:

linux-image-2.6.26-1-openvz-amd64/postinst/depmod-error-2.6.26-1-openvz-amd64: false

linux-image-2.6.26-1-openvz-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-openvz-amd64: true

linux-image-2.6.26-1-openvz-amd64/postinst/old-initrd-link-2.6.26-1-openvz-amd64: true
  linux-image-2.6.26-1-openvz-amd64/preinst/initrd-2.6.26-1-openvz-amd64:

linux-image-2.6.26-1-openvz-amd64/preinst/elilo-initrd-2.6.26-1-openvz-amd64: true
  linux-image-2.6.26-1-openvz-amd64/preinst/lilo-has-ramdisk:

linux-image-2.6.26-1-openvz-amd64/postinst/create-kimage-link-2.6.26-1-openvz-amd64: true
  shared/kernel-image/really-run-bootloader: true

linux-image-2.6.26-1-openvz-amd64/postinst/old-system-map-link-2.6.26-1-openvz-amd64: true

linux-image-2.6.26-1-openvz-amd64/preinst/abort-install-2.6.26-1-openvz-amd64:

linux-image-2.6.26-1-openvz-amd64/prerm/removing-running-kernel-2.6.26-1-openvz-amd64: true

linux-image-2.6.26-1-openvz-amd64/preinst/bootloader-initrd-2.6.26-1-openvz-amd64: true

linux-image-2.6.26-1-openvz-amd64/postinst/depmod-error-initrd-2.6.26-1-openvz-amd64: false

linux-image-2.6.26-1-openvz-amd64/preinst/lilo-initrd-2.6.26-1-openvz-amd64: true

linux-image-2.6.26-1-openvz-amd64/preinst/failed-to-move-modules-2.6.26-1-openvz-amd64:
  linux-image-2.6.26-1-openvz-amd64/postinst/kimage-is-a-directory:

linux-image-2.6.26-1-openvz-amd64/preinst/abort-overwrite-2.6.26-1-openvz-amd64:

linux-image-2.6.26-1-openvz-amd64/postinst/old-dir-initrd-link-2.6.26-1-openvz-amd64: true

*** /home/dh/rptbug.txt
Aug 22 18:16:26 listryx kernel: [36335.560736] ------------[ cut here ]------------ Aug 22 18:16:26 listryx kernel: [36335.560736] WARNING: at drivers/usb/serial/usb-serial.c:322 serial_write_room+0x4b/0x60 [usbserial]() Aug 22 18:16:26 listryx kernel: [36335.560736] Modules linked in: option usbserial usb_storage iwl3945 usbkbd usbmouse tun i915 drm binfmt_misc rfcomm hidp l2cap vzethdev vznetdev simfs vzdquota vzmon vzdev xt_tcpudp xt_length ipt_ttl xt_tcpmss xt_TCPMSS iptable_mangle iptable_filter xt_multiport xt_limit xt_dscp ipt_REJECT ip_tables x_tables ppdev lp parport ipv6 snd_atiixp_modem snd_via82xx_modem snd_intel8x0m snd_ac97_codec ac97_bus cpufreq_stats cpufreq_ondemand cpufreq_powersave cpufreq_conservative cpufreq_userspace auth_rpcgss exportfs lockd nfs_acl sunrpc isofs zlib_inflate udf crc_itu_t ext3 jbd mbcache nls_utf8 nls_cp437 vfat fat nls_base kvm_intel kvm snd_seq snd_seq_device acpi_cpufreq freq_table sbp2 loop joydev arc4 ecb crypto_blkcipher iTCO_wdt serio_raw mac80211 hci_usb psmouse i2c_i801 led_class pcspkr rng_core bluetooth snd_hda_intel video output cfg80211 intelfb wmi button snd_pcm snd_timer snd soundcore snd_page_alloc battery ac intel_agp i2c_algo_bit i2c_core evdev dcdbas xfs dm_mirror dm_lo Aug 22 18:16:26 listryx kernel: dm_snapshot dm_mod usbhid hid ff_memless sg sr_mod sd_mod cdrom ata_generic ata_piix libata scsi_mod dock b44 ide_pci_generic ide_core ohci1394 sdhci ieee1394 ssb pcmcia mmc_core pcmcia_core firmware_class mii ehci_hcd uhci_hcd thermal processor fan thermal_sys [last unloaded: iwl3945] Aug 22 18:16:26 listryx kernel: [36335.560736] Pid: 5200, comm: Xorg Tainted: G W 2.6.26-1-openvz-amd64 #1
Aug 22 18:16:26 listryx kernel: [36335.560736]
Aug 22 18:16:26 listryx kernel: [36335.560736] Call Trace:
Aug 22 18:16:26 listryx kernel: [36335.560736] <IRQ> [<ffffffff80234cb4>] warn_on_slowpath+0x51/0x7a Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff80228eb6>] hrtick_start_fair+0xfb/0x144 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff802287c0>] enqueue_task+0x56/0x61 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff80231ae1>] check_preempt_wakeup+0xbd/0xe8 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8022b229>] try_to_wake_up+0x118/0x129 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8024a703>] ktime_get+0xc/0x41 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffffa060b2f5>] :usbserial:serial_write_room+0x4b/0x60 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8035dd07>] opost+0x12/0x1b7 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8035f0a8>] n_tty_receive_buf+0x993/0xd88 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff802287c0>] enqueue_task+0x56/0x61 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff80229989>] activate_task+0x82/0xc6 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8021a62a>] apic_wait_icr_idle+0xe/0x15 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8022b229>] try_to_wake_up+0x118/0x129 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8035a1fd>] flush_to_ldisc+0xf1/0x190 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffffa06152ed>] :option:option_indat_callback+0x4c/0x8f Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff80382d14>] usb_hcd_giveback_urb+0x76/0xa4 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffffa001d98a>] :uhci_hcd:uhci_giveback_urb+0xfc/0x17f Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffffa001e033>] :uhci_hcd:uhci_scan_schedule+0x51c/0x79a Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff80231d44>] scheduler_tick+0xc5/0x1ab Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffffa001fea8>] :uhci_hcd:uhci_irq+0x123/0x136 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff80271c62>] __rcu_process_callbacks+0xff/0x19b Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff80383012>] usb_hcd_irq+0x3b/0x78 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff80239ddf>] __do_softirq+0x96/0x15c Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8026faab>] handle_IRQ_event+0x2c/0x61 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff80270f42>] handle_fasteoi_irq+0x90/0xc8 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8020f724>] do_IRQ+0x6d/0xd9 Aug 22 18:16:26 listryx kernel: [36335.560736] [<ffffffff8020c55d>] ret_from_intr+0x0/0x19
Aug 22 18:16:26 listryx kernel: [36335.560736]  <EOI>
Aug 22 18:16:26 listryx kernel: [36335.560736] ---[ end trace 0a09a1bb27cc3883 ]---



--- End Message ---
--- Begin Message ---
Daniel Huhardeaux wrote:

> I don't use anymore the USB key modem, I can't tell you more ;-)

Ok.  If you find yourself on a lazy afternoon with nothing to do
but experiment with the usbserial driver, we'll be happy to hear
from you again. ;-)

Closing.

Thanks,
Jonathan


--- End Message ---

Reply to: