[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#665000: radeon SUMO2: modesetting provokes "No signal", monitor turns off



Hi, Платов Сергей wrote:
I remove all fglrx componets, unmask radeon and reboot.
Blank screen again ("no signal on monitor, and monitor off).
What kind of monitor is this, and how is it attached?  If you start X
(using the radeon or fbdev driver), does the screen become visible
again?
No. If i start X screen not visible. But X work, and correctly detect monitor. (i try other DVI monitor, blank screen again)

[  4905.784] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[  4905.784] (II) [KMS] Kernel modesetting enabled.
[  4905.784] (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 4905.784] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  4905.784] (==) RADEON(0): Default visual is TrueColor
[  4905.784] (==) RADEON(0): RGB weight 888
[  4905.784] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[  4905.784] (--) RADEON(0): Chipset: "SUMO2" (ChipID = 0x9645)
[  4905.784] (II) RADEON(0): PCIE card detected
[  4905.784] drmOpenDevice: node name is /dev/dri/card0
[  4905.784] drmOpenDevice: open result is 11, (OK)
[  4905.784] drmOpenByBusid: Searching for BusID pci:0000:00:01.0
[  4905.784] drmOpenDevice: node name is /dev/dri/card0
[  4905.784] drmOpenDevice: open result is 11, (OK)
[  4905.784] drmOpenByBusid: drmOpenMinor returns 11
[  4905.785] drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
[  4905.785] (II) Loading sub module "exa"
[  4905.785] (II) LoadModule: "exa"
[  4905.785] (II) Loading /usr/lib/xorg/modules/libexa.so
[  4905.785] (II) Module exa: vendor="X.Org Foundation"
[  4905.785]     compiled for 1.11.4, module version = 2.5.0
[  4905.785]     ABI class: X.Org Video Driver, version 11.0
[  4905.785] (II) RADEON(0): KMS Color Tiling: enabled
[  4905.785] (II) RADEON(0): KMS Pageflipping: enabled
[  4905.785] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[  4906.015] (II) RADEON(0): Output VGA-0 using monitor section Monitor
[  4906.204] (II) RADEON(0): Output DVI-0 has no monitor section
[  4906.520] (II) RADEON(0): EDID for output VGA-0
[  4906.520] (II) RADEON(0): Printing probed modes for output VGA-0
[ 4906.520] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 4906.520] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 4906.520] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 4906.520] (II) RADEON(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 4906.520] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz)
[  4906.712] (II) RADEON(0): EDID for output DVI-0
[  4906.712] (II) RADEON(0): Output VGA-0 connected
[  4906.712] (II) RADEON(0): Output DVI-0 disconnected
[  4906.712] (II) RADEON(0): Using user preference for initial modes
[  4906.712] (II) RADEON(0): Output VGA-0 using initial mode 1024x768
[ 4906.712] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 4906.712] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fcc0000
[  4906.712] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[  4906.712] (==) RADEON(0): DPI set to (96, 96)
[  4906.712] (II) Loading sub module "fb"
[  4906.712] (II) LoadModule: "fb"
[  4906.712] (II) Loading /usr/lib/xorg/modules/libfb.so
[  4906.712] (II) Module fb: vendor="X.Org Foundation"
[  4906.712]     compiled for 1.11.4, module version = 1.0.0
[  4906.712]     ABI class: X.Org ANSI C Emulation, version 0.4
[  4906.712] (II) Loading sub module "ramdac"
[  4906.712] (II) LoadModule: "ramdac"
[  4906.712] (II) Module "ramdac" already built-in
[  4906.712] (--) Depth 24 pixmap format is 32 bpp
[  4906.712] (II) RADEON(0): [DRI2] Setup complete
[  4906.712] (II) RADEON(0): [DRI2]   DRI driver: r600
[  4906.712] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[  4906.712] (II) RADEON(0): Front buffer size: 3072K
[  4906.712] (II) RADEON(0): VRAM usage limit set to 230169K
[  4906.712] (==) RADEON(0): Backing store disabled
[  4906.712] (II) RADEON(0): Direct rendering enabled
[  4906.712] (II) RADEON(0): Setting EXA maxPitchBytes
[  4906.712] (II) EXA(0): Driver allocated offscreen pixmaps
[ 4906.712] (II) EXA(0): Driver registered support for the following operations:
[  4906.712] (II)         Solid
[  4906.712] (II)         Copy
[  4906.712] (II)         Composite (RENDER acceleration)
[  4906.712] (II)         UploadToScreen
[  4906.712] (II)         DownloadFromScreen
[  4906.712] (II) RADEON(0): Acceleration enabled
[  4906.712] (**) RADEON(0): DPMS enabled
[  4906.712] (==) RADEON(0): Silken mouse enabled
[  4906.712] (II) RADEON(0): Set up textured video
[  4906.712] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[  4906.712] (II) RADEON(0): [XvMC] Extension initialized.
[ 4906.712] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  4906.713] (WW) RADEON(0): Option "VendorName" is not used
[  4906.713] (WW) RADEON(0): Option "ModelName" is not used
[  4906.713] (--) RandR disabled
[  4906.713] (II) Initializing built-in extension Generic Event Extension
[  4906.713] (II) Initializing built-in extension SHAPE
[  4906.713] (II) Initializing built-in extension MIT-SHM
[  4906.713] (II) Initializing built-in extension XInputExtension
[  4906.713] (II) Initializing built-in extension XTEST
[  4906.713] (II) Initializing built-in extension BIG-REQUESTS
[  4906.713] (II) Initializing built-in extension SYNC
[  4906.713] (II) Initializing built-in extension XKEYBOARD
[  4906.713] (II) Initializing built-in extension XC-MISC
[  4906.713] (II) Initializing built-in extension SECURITY
[  4906.713] (II) Initializing built-in extension XINERAMA
[  4906.713] (II) Initializing built-in extension XFIXES
[  4906.713] (II) Initializing built-in extension RENDER
[  4906.713] (II) Initializing built-in extension RANDR
[  4906.713] (II) Initializing built-in extension COMPOSITE
[  4906.713] (II) Initializing built-in extension DAMAGE
[  4906.713] (II) SELinux: Disabled on system
[  4906.722] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  4906.722] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4906.722] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  4906.722] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 4906.722] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  4906.722] (II) AIGLX: Loaded and initialized r600
[  4906.722] (II) GLX: Initialized DRI2 GL provider for screen 0
[  4906.723] (II) RADEON(0): Setting screen physical size to 270 x 203





Reply to: