[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#665000: blank screen after load "radeon" module





---- Original Message ---- From: Jonathan Nieder
<jrnieder@gmail.com> To: "Sergey Platov" <psa@trtg.net> Cc:
665000@bugs.debian.org Sent: Г—ГІ, ГЊГ Г° 22, 2012, 17:11 PM Subject: Re:
blank screen after load "radeon" module

Hi Sergey,

Sergey Platov wrote:

** Tainted: PIO (6145) * Proprietary module has been loaded. *
Working around severe firmware bug. * Out-of-tree module has been
loaded.
[...]
[113170.960076] [fglrx] module unloaded - fglrx 8.95.3 [Feb 14
2012] [113218.218326] [drm] Initialized drm 1.1.0 20060810
[113218.271758] [drm] radeon kernel modesetting enabled.

Does this happen if you boot without loading the fglrx driver at all
(for example by temporarily uninstalling or blacklisting it)?

Jonathan

I can't repeat this bug on 3.2.9 kernel version, because i upgrade
kernel to 3.2.12, but bug repeated and on 3.2.12 kernel.

I remove all fglrx componets, unmask radeon and reboot.
Blank screen again ("no signal" on monitor, and monitor off).

dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.12-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Tue Mar 20 18:36:37 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=fcc5daf9-6a77-4e2a-bd6a-4c4589285864 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000096800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006edc0000 (usable)
[    0.000000]  BIOS-e820: 000000006edc0000 - 000000006edf3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006edf3000 - 000000006ee00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000006ee00000 - 000000006ef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-A55M-S2HP/GA-A55M-S2HP, BIOS F2 07/13/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x6edc0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 0FC0000000 write-back
[    0.000000]   1 base 0040000000 mask 0FE0000000 write-back
[    0.000000]   2 base 0060000000 mask 0FF0000000 write-back
[    0.000000]   3 base 006EE00000 mask 0FFFE00000 uncachable
[    0.000000]   4 base 006F000000 mask 0FFF000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] found SMP MP-table at [ffff8800000f5ae0] f5ae0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000091000] 91000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-000000006edc0000
[    0.000000]  0000000000 - 0040000000 page 1G
[    0.000000]  0040000000 - 006ec00000 page 2M
[    0.000000]  006ec00000 - 006edc0000 page 4k
[    0.000000] kernel direct mapping tables up to 6edc0000 @ 1fffd000-20000000
[    0.000000] RAMDISK: 36a0a000 - 374fd000
[    0.000000] ACPI: RSDP 00000000000f7930 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 000000006edf3000 00040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 000000006edf3080 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 000000006edf3100 049CB (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 000000006edc0000 00040
[    0.000000] ACPI: MSDM 000000006edf7bc0 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: HPET 000000006edf7c40 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 000000006edf7c80 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 000000006edf7b00 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 000000006edf7d30 007FE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 000000006edf85a0 00695 (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000006edc0000
[    0.000000] Initmem setup node 0 0000000000000000-000000006edc0000
[    0.000000]   NODE_DATA [000000006edbb000 - 000000006edbffff]
[    0.000000]  [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006c800000-ffff88006e1fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x00000096
[    0.000000]     0: 0x00000100 -> 0x0006edc0
[    0.000000] On node 0 totalpages: 453958
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6153 pages used for memmap
[    0.000000]   DMA32 zone: 443831 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 6ef00000 (gap: 6ef00000:71100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006ea00000 s82304 r8192 d24192 u262144
[    0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 447744
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=fcc5daf9-6a77-4e2a-bd6a-4c4589285864 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1768584k/1816320k available (3402k kernel code, 488k absent, 47248k reserved, 3330k data, 568k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2499.885 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.77 BogoMIPS (lpj=9999540)
[    0.004008] pid_max: default: 32768 minimum: 301
[    0.004054] Security Framework initialized
[    0.004059] AppArmor: AppArmor disabled by boot time parameter
[    0.004226] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008607] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.008896] Mount-cache hash table entries: 256
[    0.009018] Initializing cgroup subsys cpuacct
[    0.009023] Initializing cgroup subsys memory
[    0.009035] Initializing cgroup subsys devices
[    0.009037] Initializing cgroup subsys freezer
[    0.009040] Initializing cgroup subsys net_cls
[    0.009042] Initializing cgroup subsys blkio
[    0.009049] Initializing cgroup subsys perf_event
[    0.009079] tseg: 006ef00000
[    0.009081] CPU: Physical Processor ID: 0
[    0.009082] CPU: Processor Core ID: 0
[    0.009084] mce: CPU supports 6 MCE banks
[    0.009581] ACPI: Core revision 20110623
[    0.012532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054257] CPU0: AMD A4-3300 APU with Radeon(tm) HD Graphics stepping 00
[    0.056003] Performance Events: AMD PMU driver.
[    0.056003] ... version:                0
[    0.056003] ... bit width:              48
[    0.056003] ... generic registers:      4
[    0.056003] ... value mask:             0000ffffffffffff
[    0.056003] ... max period:             00007fffffffffff
[    0.056003] ... fixed-purpose events:   0
[    0.056003] ... event mask:             000000000000000f
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] Booting Node   0, Processors  #1
[    0.056003] smpboot cpu 1: start_ip = 91000
[    0.144024] NMI watchdog enabled, takes one hw-pmu counter.
[    0.144044] Brought up 2 CPUs
[    0.144046] Total of 2 processors activated (9999.65 BogoMIPS).
[    0.144485] devtmpfs: initialized
[    0.146561] PM: Registering ACPI NVS region at 6edc0000 (208896 bytes)
[    0.146561] print_constraints: dummy:
[    0.146561] NET: Registered protocol family 16
[    0.146561] Extended Config Space enabled on 0 nodes
[    0.146561] ACPI: bus type pci registered
[    0.148048] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.148051] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.163546] PCI: Using configuration type 1 for base access
[    0.164117] bio: create slab <bio-0> at 0
[    0.164175] ACPI: Added _OSI(Module Device)
[    0.164175] ACPI: Added _OSI(Processor Device)
[    0.164175] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.164175] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164611] ACPI: EC: Look up EC in DSDT
[    0.170135] ACPI: Interpreter enabled
[    0.170142] ACPI: (supports S0 S3 S4 S5)
[    0.170165] ACPI: Using IOAPIC for interrupt routing
[    0.266566] ACPI: No dock devices found.
[    0.266569] HEST: Table not found.
[    0.266574] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.266641] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.266776] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.266778] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.266781] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.266783] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.266785] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.266787] pci_root PNP0A03:00: host bridge window [mem 0x7f000000-0xfebfffff]
[    0.266800] pci 0000:00:00.0: [1022:1705] type 0 class 0x000600
[    0.266840] pci 0000:00:01.0: [1002:9645] type 0 class 0x000300
[    0.266850] pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.266856] pci 0000:00:01.0: reg 14: [io  0xf800-0xf8ff]
[    0.266863] pci 0000:00:01.0: reg 18: [mem 0xfdfc0000-0xfdffffff]
[    0.266908] pci 0000:00:01.0: supports D1 D2
[    0.266928] pci 0000:00:04.0: [1022:1709] type 1 class 0x000604
[    0.266983] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.266987] pci 0000:00:04.0: PME# disabled
[    0.267007] pci 0000:00:05.0: [1022:170a] type 1 class 0x000604
[    0.267062] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.267066] pci 0000:00:05.0: PME# disabled
[    0.267100] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
[    0.267119] pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
[    0.267128] pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
[    0.267138] pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
[    0.267147] pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
[    0.267156] pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
[    0.267166] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f7ff]
[    0.267224] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
[    0.267237] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[    0.267306] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
[    0.267325] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
[    0.267405] pci 0000:00:12.2: supports D1 D2
[    0.267406] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.267410] pci 0000:00:12.2: PME# disabled
[    0.267431] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
[    0.267444] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
[    0.267514] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
[    0.267532] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
[    0.267612] pci 0000:00:13.2: supports D1 D2
[    0.267614] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.267618] pci 0000:00:13.2: PME# disabled
[    0.267638] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[    0.267714] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[    0.267734] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.267798] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.267802] pci 0000:00:14.2: PME# disabled
[    0.267815] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[    0.267890] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
[    0.267931] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
[    0.267944] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
[    0.268068] pci 0000:00:16.0: [1022:7807] type 0 class 0x000c03
[    0.268081] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
[    0.268152] pci 0000:00:16.2: [1022:7808] type 0 class 0x000c03
[    0.268170] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
[    0.268250] pci 0000:00:16.2: supports D1 D2
[    0.268252] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.268256] pci 0000:00:16.2: PME# disabled
[    0.268279] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[    0.268313] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[    0.268343] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[    0.268375] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[    0.268415] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[    0.268445] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[    0.268475] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[    0.268506] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[    0.268590] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[    0.268604] pci 0000:01:00.0: reg 10: [io  0xde00-0xdeff]
[    0.268628] pci 0000:01:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[    0.268643] pci 0000:01:00.0: reg 20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
[    0.268706] pci 0000:01:00.0: supports D1 D2
[    0.268708] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.268712] pci 0000:01:00.0: PME# disabled
[    0.276069] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.276084] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.276093] pci 0000:00:04.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.276104] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.276203] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[    0.276224] pci 0000:02:00.0: reg 10: [mem 0xfdbf0000-0xfdbfffff 64bit]
[    0.276317] pci 0000:02:00.0: supports D1
[    0.276318] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.276323] pci 0000:02:00.0: PME# disabled
[    0.284069] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[    0.284084] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.284093] pci 0000:00:05.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.284104] pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.284179] pci 0000:03:06.0: [10ec:8139] type 0 class 0x000200
[    0.284208] pci 0000:03:06.0: reg 10: [io  0xce00-0xceff]
[    0.284220] pci 0000:03:06.0: reg 14: [mem 0xfddff000-0xfddff0ff]
[    0.284310] pci 0000:03:06.0: supports D1 D2
[    0.284312] pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold
[    0.284317] pci 0000:03:06.0: PME# disabled
[    0.284362] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[    0.284367] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.284371] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.284375] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.284377] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.284380] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.284382] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.284385] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.284387] pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.284390] pci 0000:00:14.4:   bridge window [mem 0x7f000000-0xfebfffff] (subtractive decode)
[    0.284409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.284767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.284810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[    0.284845] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[    0.284892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.284926]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.284929]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.284931] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.299524] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[    0.299568] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[    0.299608] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[    0.299647] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[    0.299686] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[    0.299725] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[    0.299768] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[    0.299807] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[    0.300066] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.300082] vgaarb: loaded
[    0.300084] vgaarb: bridge control possible 0000:00:01.0
[    0.300124] PCI: Using ACPI for IRQ routing
[    0.308471] PCI: pci_cache_line_size set to 64 bytes
[    0.308558] reserve RAM buffer: 0000000000096800 - 000000000009ffff
[    0.308560] reserve RAM buffer: 000000006edc0000 - 000000006fffffff
[    0.308670] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.308674] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.310696] Switching to clocksource hpet
[    0.310732] pnp: PnP ACPI init
[    0.310732] ACPI: bus type pnp registered
[    0.310732] pnp 00:00: [bus 00-ff]
[    0.310732] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.310732] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.310732] pnp 00:00: [io  0x0d00-0xffff window]
[    0.310732] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.310732] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.310732] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.310732] pnp 00:00: [mem 0x7f000000-0xfebfffff window]
[    0.310732] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.310732] pnp 00:01: [io  0x0010-0x001f]
[    0.310732] pnp 00:01: [io  0x0022-0x003f]
[    0.310732] pnp 00:01: [io  0x0044-0x004d]
[    0.310732] pnp 00:01: [io  0x0050-0x005f]
[    0.310732] pnp 00:01: [io  0x0062-0x0063]
[    0.310732] pnp 00:01: [io  0x0065-0x006f]
[    0.310732] pnp 00:01: [io  0x0074-0x007f]
[    0.310732] pnp 00:01: [io  0x0091-0x0093]
[    0.310732] pnp 00:01: [io  0x00a2-0x00bf]
[    0.310732] pnp 00:01: [io  0x00e0-0x00ef]
[    0.310732] pnp 00:01: [io  0x04d0-0x04d1]
[    0.310732] pnp 00:01: [io  0x0220-0x0225]
[    0.310732] pnp 00:01: [io  0x0290-0x0294]
[    0.310732] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.310732] system 00:01: [io  0x0220-0x0225] has been reserved
[    0.310732] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.310732] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.316491] pnp 00:02: [io  0x0900-0x091f]
[    0.316494] pnp 00:02: [io  0x0228-0x022f]
[    0.316496] pnp 00:02: [io  0x040b]
[    0.316498] pnp 00:02: [io  0x04d6]
[    0.316499] pnp 00:02: [io  0x0c00-0x0c01]
[    0.316501] pnp 00:02: [io  0x0c14]
[    0.316507] pnp 00:02: [io  0x0c50-0x0c52]
[    0.316508] pnp 00:02: [io  0x0c6c-0x0c6d]
[    0.316510] pnp 00:02: [io  0x0c6f]
[    0.316512] pnp 00:02: [io  0x0cd0-0x0cd1]
[    0.316513] pnp 00:02: [io  0x0cd2-0x0cd3]
[    0.316515] pnp 00:02: [io  0x0cd4-0x0cdf]
[    0.316516] pnp 00:02: [io  0x0800-0x08fe]
[    0.316518] pnp 00:02: [io  0x0a10-0x0a17]
[    0.316520] pnp 00:02: [io  0x0b00-0x0b0f]
[    0.316521] pnp 00:02: [io  0x0b10-0x0b1f]
[    0.316523] pnp 00:02: [io  0x0b20-0x0b3f]
[    0.316525] pnp 00:02: [mem 0x00000000-0x00000fff window]
[    0.316527] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[    0.316618] system 00:02: [io  0x0900-0x091f] has been reserved
[    0.316621] system 00:02: [io  0x0228-0x022f] has been reserved
[    0.316623] system 00:02: [io  0x040b] has been reserved
[    0.316626] system 00:02: [io  0x04d6] has been reserved
[    0.316628] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.316630] system 00:02: [io  0x0c14] has been reserved
[    0.316633] system 00:02: [io  0x0c50-0x0c52] has been reserved
[    0.316635] system 00:02: [io  0x0c6c-0x0c6d] has been reserved
[    0.316637] system 00:02: [io  0x0c6f] has been reserved
[    0.316640] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.316643] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.316646] system 00:02: [io  0x0cd4-0x0cdf] has been reserved
[    0.316648] system 00:02: [io  0x0800-0x08fe] has been reserved
[    0.316650] system 00:02: [io  0x0a10-0x0a17] has been reserved
[    0.316653] system 00:02: [io  0x0b00-0x0b0f] has been reserved
[    0.316655] system 00:02: [io  0x0b10-0x0b1f] has been reserved
[    0.316657] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.316660] system 00:02: [mem 0x00000000-0x00000fff window] could not be reserved
[    0.316663] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.316667] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.316763] pnp 00:03: [dma 4]
[    0.316765] pnp 00:03: [io  0x0000-0x000f]
[    0.316767] pnp 00:03: [io  0x0080-0x0090]
[    0.316769] pnp 00:03: [io  0x0094-0x009f]
[    0.316770] pnp 00:03: [io  0x00c0-0x00df]
[    0.316800] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.316850] pnp 00:04: [irq 0 disabled]
[    0.316862] pnp 00:04: [irq 8]
[    0.316864] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.316892] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.316921] pnp 00:05: [io  0x0070-0x0073]
[    0.316948] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.316956] pnp 00:06: [io  0x0061]
[    0.316983] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.316991] pnp 00:07: [io  0x00f0-0x00ff]
[    0.316998] pnp 00:07: [irq 13]
[    0.317026] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.317215] pnp 00:08: [io  0x0060]
[    0.317217] pnp 00:08: [io  0x0064]
[    0.317223] pnp 00:08: [irq 1]
[    0.317261] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.317292] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    0.317341] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.317344] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.317526] pnp 00:0a: [mem 0x000d4400-0x000d7fff]
[    0.317529] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[    0.317531] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[    0.317533] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[    0.317535] pnp 00:0a: [mem 0x6edc0000-0x6edfffff]
[    0.317536] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[    0.317538] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[    0.317540] pnp 00:0a: [mem 0x00100000-0x6edbffff]
[    0.317542] pnp 00:0a: [mem 0x6ee00000-0x6eefffff]
[    0.317544] pnp 00:0a: [mem 0x6ef00000-0x6effffff]
[    0.317546] pnp 00:0a: [mem 0x6f000000-0x7effffff]
[    0.317547] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.317549] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.317551] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
[    0.317608] system 00:0a: [mem 0x000d4400-0x000d7fff] has been reserved
[    0.317611] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.317613] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.317616] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.317619] system 00:0a: [mem 0x6edc0000-0x6edfffff] could not be reserved
[    0.317621] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[    0.317624] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.317626] system 00:0a: [mem 0x00100000-0x6edbffff] could not be reserved
[    0.317629] system 00:0a: [mem 0x6ee00000-0x6eefffff] has been reserved
[    0.317631] system 00:0a: [mem 0x6ef00000-0x6effffff] could not be reserved
[    0.317634] system 00:0a: [mem 0x6f000000-0x7effffff] could not be reserved
[    0.317637] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.317639] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.317642] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.317645] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.317661] pnp: PnP ACPI: found 11 devices
[    0.317662] ACPI: ACPI bus type pnp unregistered
[    0.325519] PCI: max bus depth: 1 pci_try_num: 2
[    0.325542] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[    0.325545] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.325549] pci 0000:00:04.0:   bridge window [mem 0xfd900000-0xfd9fffff]
[    0.325553] pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.325558] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[    0.325560] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.325564] pci 0000:00:05.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.325567] pci 0000:00:05.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.325572] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[    0.325575] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.325580] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.325584] pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
[    0.325611] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.325616] pci 0000:00:04.0: setting latency timer to 64
[    0.325627] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.325630] pci 0000:00:05.0: setting latency timer to 64
[    0.325637] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.325639] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.325641] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.325643] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.325645] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.325647] pci_bus 0000:00: resource 9 [mem 0x7f000000-0xfebfffff]
[    0.325649] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.325651] pci_bus 0000:01: resource 1 [mem 0xfd900000-0xfd9fffff]
[    0.325653] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.325655] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.325657] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.325659] pci_bus 0000:02: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[    0.325661] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.325663] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.325665] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[    0.325667] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.325669] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.325671] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.325673] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.325675] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.325677] pci_bus 0000:03: resource 9 [mem 0x7f000000-0xfebfffff]
[    0.325761] NET: Registered protocol family 2
[    0.325879] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.326554] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.327922] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.328275] TCP: Hash tables configured (established 262144 bind 65536)
[    0.328278] TCP reno registered
[    0.328290] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.328308] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.328470] NET: Registered protocol family 1
[    0.328486] pci 0000:00:01.0: Boot video device
[    0.328512] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.400120] pci 0000:00:12.0: PCI INT A disabled
[    0.400155] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.400190] pci 0000:00:12.2: PCI INT B disabled
[    0.400207] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.472118] pci 0000:00:13.0: PCI INT A disabled
[    0.472153] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.472187] pci 0000:00:13.2: PCI INT B disabled
[    0.472220] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.544116] pci 0000:00:14.5: PCI INT C disabled
[    0.544150] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.616119] pci 0000:00:16.0: PCI INT A disabled
[    0.616154] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.616189] pci 0000:00:16.2: PCI INT B disabled
[    0.616230] PCI: CLS 64 bytes, default 64
[    0.616284] Unpacking initramfs...
[    0.839527] Freeing initrd memory: 11212k freed
[    0.843056] perf: AMD IBS detected (0x000000ff)
[    0.843320] audit: initializing netlink socket (disabled)
[    0.843332] type=2000 audit(1332431149.836:1): initialized
[    0.859647] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.867068] VFS: Disk quotas dquot_6.5.2
[    0.867101] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.867169] msgmni has been set to 3476
[    0.867453] alg: No test for stdrng (krng)
[    0.867491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.867495] io scheduler noop registered
[    0.867496] io scheduler deadline registered
[    0.867512] io scheduler cfq registered (default)
[    0.867689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.867715] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.867717] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.868060] ERST: Table is not found!
[    0.868061] GHES: HEST is not enabled!
[    0.868128] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.916638] Linux agpgart interface v0.103
[    0.916756] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.916758] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.916954] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.917289] mousedev: PS/2 mouse device common for all mice
[    0.917355] rtc_cmos 00:05: RTC can wake from S4
[    0.917567] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.917601] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.917616] cpuidle: using governor ladder
[    0.917618] cpuidle: using governor menu
[    0.917819] TCP cubic registered
[    0.917865] NET: Registered protocol family 10
[    0.918278] Mobile IPv6
[    0.918280] NET: Registered protocol family 17
[    0.918284] Registering the dns_resolver key type
[    0.918565] PM: Hibernation image not present or could not be loaded.
[    0.918580] registered taskstats version 1
[    0.922353] rtc_cmos 00:05: setting system clock to 2012-03-22 15:45:51 UTC (1332431151)
[    0.922390] Initializing network drop monitor service
[    0.923373] Freeing unused kernel memory: 568k freed
[    0.923511] Write protecting the kernel read-only data: 6144k
[    0.925834] Freeing unused kernel memory: 676k freed
[    0.928346] Freeing unused kernel memory: 668k freed
[    0.936075] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.944351] udevd[48]: starting version 175
[    0.962841] usbcore: registered new interface driver usbfs
[    0.962865] usbcore: registered new interface driver hub
[    0.975379] SCSI subsystem initialized
[    0.986306] usbcore: registered new device driver usb
[    0.988365] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.988395] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.988415] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    0.988444] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.988453] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.988597] QUIRK: Enable AMD PLL fix
[    0.988607] ehci_hcd 0000:00:12.2: debug port 1
[    0.988636] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
[    0.991211] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    0.991232] 8139cp 0000:03:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    0.991596] 8139too: 8139too Fast Ethernet driver 0.9.28
[    0.991638] 8139too 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.997848] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.997871] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.997905] r8169 0000:01:00.0: setting latency timer to 64
[    0.997969] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[    0.998358] r8169 0000:01:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000316000, 50:e5:49:56:6e:f4, XID 0c900800 IRQ 40
[    0.998362] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.999727] libata version 3.00 loaded.
[    1.000086] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.000113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.000115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.000117] usb usb1: Product: EHCI Host Controller
[    1.000119] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[    1.000121] usb usb1: SerialNumber: 0000:00:12.2
[    1.000290] hub 1-0:1.0: USB hub found
[    1.000297] hub 1-0:1.0: 5 ports detected
[    1.000383] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.000406] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.000413] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.000420] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.000440] ehci_hcd 0000:00:13.2: debug port 1
[    1.000455] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
[    1.002085] 8139too 0000:03:06.0: eth1: RealTek RTL8139 at 0xffffc90000314000, 00:50:fc:fd:87:91, IRQ 20
[    1.012061] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.012091] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.012094] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.012096] usb usb2: Product: EHCI Host Controller
[    1.012098] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[    1.012099] usb usb2: SerialNumber: 0000:00:13.2
[    1.012272] hub 2-0:1.0: USB hub found
[    1.012278] hub 2-0:1.0: 5 ports detected
[    1.012369] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.012391] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    1.012399] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.012406] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.012426] ehci_hcd 0000:00:16.2: debug port 1
[    1.012442] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
[    1.024044] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.024074] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.024077] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.024079] usb usb3: Product: EHCI Host Controller
[    1.024081] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[    1.024083] usb usb3: SerialNumber: 0000:00:16.2
[    1.024194] hub 3-0:1.0: USB hub found
[    1.024200] hub 3-0:1.0: 4 ports detected
[    1.024291] ahci 0000:00:11.0: version 3.0
[    1.024327] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.024378] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
[    1.024476] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.024479] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
[    1.024732] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.026171] scsi0 : ahci
[    1.026297] scsi1 : ahci
[    1.026355] scsi2 : ahci
[    1.026410] scsi3 : ahci
[    1.026469] scsi4 : ahci
[    1.026523] scsi5 : ahci
[    1.026660] ata1: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f100 irq 41
[    1.026664] ata2: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f180 irq 41
[    1.026667] ata3: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f200 irq 41
[    1.026670] ata4: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f280 irq 41
[    1.026673] ata5: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f300 irq 41
[    1.026676] ata6: SATA max UDMA/133 abar m2048@0xfe02f000 port 0xfe02f380 irq 41
[    1.026711] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.026736] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.026748] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.026783] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
[    1.084076] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.084080] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.084082] usb usb4: Product: OHCI Host Controller
[    1.084084] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[    1.084086] usb usb4: SerialNumber: 0000:00:12.0
[    1.084290] hub 4-0:1.0: USB hub found
[    1.084298] hub 4-0:1.0: 5 ports detected
[    1.084387] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.084410] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.084419] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.084437] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
[    1.144114] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.144118] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.144121] usb usb5: Product: OHCI Host Controller
[    1.144122] usb usb5: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[    1.144124] usb usb5: SerialNumber: 0000:00:13.0
[    1.144426] hub 5-0:1.0: USB hub found
[    1.144435] hub 5-0:1.0: 5 ports detected
[    1.144523] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.144549] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.144558] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.144576] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
[    1.204105] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.204108] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.204111] usb usb6: Product: OHCI Host Controller
[    1.204112] usb usb6: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[    1.204114] usb usb6: SerialNumber: 0000:00:14.5
[    1.204367] hub 6-0:1.0: USB hub found
[    1.204375] hub 6-0:1.0: 2 ports detected
[    1.204460] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.204484] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    1.204492] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.204510] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
[    1.264116] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.264121] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.264123] usb usb7: Product: OHCI Host Controller
[    1.264124] usb usb7: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[    1.264126] usb usb7: SerialNumber: 0000:00:16.0
[    1.264353] hub 7-0:1.0: USB hub found
[    1.264361] hub 7-0:1.0: 4 ports detected
[    1.348212] ata5: SATA link down (SStatus 0 SControl 300)
[    1.520124] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.520171] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.520213] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.521290] ata6.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
[    1.521996] ata4.00: ATA-8: ST31000340AS, SD1A, max UDMA/133
[    1.522006] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.522059] ata3.00: ATA-8: ST31000340AS, SD1A, max UDMA/133
[    1.522070] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.522791] ata6.00: configured for UDMA/100
[    1.524207] ata4.00: configured for UDMA/133
[    1.524240] ata3.00: configured for UDMA/133
[    1.576143] usb 4-3: new full-speed USB device number 2 using ohci_hcd
[    1.632121] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.632169] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.635942] ata1.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[    1.635947] ata1.00: 390721968 sectors, multi 0: LBA48
[    1.635969] ata2.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[    1.635971] ata2.00: 390721968 sectors, multi 0: LBA48
[    1.639952] ata1.00: configured for UDMA/133
[    1.639984] ata2.00: configured for UDMA/133
[    1.640293] scsi 0:0:0:0: Direct-Access     ATA      ST3200822AS      3.01 PQ: 0 ANSI: 5
[    1.640674] scsi 1:0:0:0: Direct-Access     ATA      ST3200822AS      3.01 PQ: 0 ANSI: 5
[    1.641009] scsi 2:0:0:0: Direct-Access     ATA      ST31000340AS     SD1A PQ: 0 ANSI: 5
[    1.641199] scsi 3:0:0:0: Direct-Access     ATA      ST31000340AS     SD1A PQ: 0 ANSI: 5
[    1.642968] scsi 5:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200S  1.06 PQ: 0 ANSI: 5
[    1.649458] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    1.649498] sd 0:0:0:0: [sda] Write Protect is off
[    1.649501] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.649518] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.650218] sd 1:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    1.650258] sd 1:0:0:0: [sdb] Write Protect is off
[    1.650260] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.650276] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.650753] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.650765] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.650794] sd 2:0:0:0: [sdc] Write Protect is off
[    1.650797] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.650803] sd 3:0:0:0: [sdd] Write Protect is off
[    1.650806] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.650814] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.650822] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.655379]  sdc: unknown partition table
[    1.655777] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.674378]  sdd: unknown partition table
[    1.674566] sd 3:0:0:0: [sdd] Attached SCSI disk
[    1.697251]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[    1.698335] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.710464]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    1.711357] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.714236] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.714247] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.714710] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.840109] Refined TSC clocksource calibration: 2499.989 MHz.
[    1.840121] Switching to clocksource tsc
[    1.959189] usb 4-3: New USB device found, idVendor=0a12, idProduct=0001
[    1.959200] usb 4-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.959207] usb 4-3: Product: EDRClassone
[    2.618337] device-mapper: uevent: version 1.0.3
[    2.618526] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.690549] PM: Starting manual resume from disk
[    2.690554] PM: Hibernation image partition 8:7 present
[    2.690556] PM: Looking for hibernation image.
[    2.690945] PM: Image not found (code -22)
[    2.690953] PM: Hibernation image not present or could not be loaded.
[    2.708938] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.566657] udevd[319]: starting version 175
[    3.937588] ACPI: acpi_idle registered with cpuidle
[    3.962255] Bluetooth: Core ver 2.16
[    3.962278] NET: Registered protocol family 31
[    3.962280] Bluetooth: HCI device and connection manager initialized
[    3.962283] Bluetooth: HCI socket layer initialized
[    3.962285] Bluetooth: L2CAP socket layer initialized
[    3.962290] Bluetooth: SCO socket layer initialized
[    3.983661] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    3.984044] usbcore: registered new interface driver btusb
[    4.128700] cfg80211: Calling CRDA to update world regulatory domain
[    4.132265] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    4.145659] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    4.145721] ACPI: Power Button [PWRB]
[    4.145781] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.145806] ACPI: Power Button [PWRF]
[    4.291985] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.367208] [drm] Initialized drm 1.1.0 20060810
[    4.478700] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.478711] ath9k 0000:02:00.0: setting latency timer to 64
[    4.493342] [drm] radeon kernel modesetting enabled.
[    4.493391] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.493396] radeon 0000:00:01.0: setting latency timer to 64
[    4.493604] [drm] initializing kernel modesetting (SUMO2 0x1002:0x9645 0x1458:0xD000).
[    4.493636] [drm] register mmio base: 0xFDFC0000
[    4.493637] [drm] register mmio size: 262144
[    4.495389] ATOM BIOS: General
[    4.495414] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[    4.495416] radeon 0000:00:01.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[    4.495421] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.495423] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.495425] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.495426] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.495428] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.495430] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.495432] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.495433] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.495435] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.495437] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    4.525991] [drm] Detected VRAM RAM=256M, BAR=256M
[    4.525994] [drm] RAM width 32bits DDR
[    4.526061] [TTM] Zone  kernel: Available graphics memory: 890854 kiB.
[    4.526063] [TTM] Initializing pool allocator.
[    4.526087] [drm] radeon: 256M of VRAM memory ready
[    4.526089] [drm] radeon: 512M of GTT memory ready.
[    4.526106] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.526108] [drm] Driver supports precise vblank timestamp query.
[    4.526441] radeon 0000:00:01.0: irq 42 for MSI/MSI-X
[    4.526482] radeon 0000:00:01.0: radeon: using MSI.
[    4.526707] [drm] radeon: irq initialized.
[    4.526711] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    4.527394] ath: EEPROM regdomain: 0x809c
[    4.527398] ath: EEPROM indicates we should expect a country code
[    4.527400] ath: doing EEPROM country->regdmn map search
[    4.527401] ath: country maps to regdmn code: 0x52
[    4.527403] ath: Country alpha2 being used: CN
[    4.527404] ath: Regpair used: 0x52
[    4.528162] [drm] Loading SUMO2 Microcode
[    4.634066] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    4.634593] Registered led device: ath9k-phy0
[    4.634598] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000340000, irq=17
[    4.970794] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    4.970908] radeon 0000:00:01.0: WB enabled
[    4.987108] [drm] ring test succeeded in 2 usecs
[    4.987211] [drm] radeon: ib pool ready.
[    4.987281] [drm] ib test succeeded in 0 usecs
[    4.988342] [drm] Radeon Display Connectors
[    4.988345] [drm] Connector 0:
[    4.988346] [drm]   VGA
[    4.988347] [drm]   HPD2
[    4.988349] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    4.988350] [drm]   Encoders:
[    4.988352] [drm]     CRT1: INTERNAL_UNIPHY2
[    4.988353] [drm]     CRT1: NUTMEG
[    4.988354] [drm] Connector 1:
[    4.988355] [drm]   DVI-D
[    4.988356] [drm]   HPD1
[    4.988358] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    4.988360] [drm]   Encoders:
[    4.988361] [drm]     DFP1: INTERNAL_UNIPHY2
[    5.005614] [drm] Internal thermal controller without fan control
[    5.005655] [drm] radeon: power management initialized
[    5.173635] Error: Driver 'pcspkr' is already registered, aborting...
[    5.397572] [drm] fb mappable at 0xD0142000
[    5.397575] [drm] vram apper at 0xD0000000
[    5.397577] [drm] size 3145728
[    5.397578] [drm] fb depth is 24
[    5.397579] [drm]    pitch is 4096
[    5.397766] fbcon: radeondrmfb (fb0) is primary device
[    5.468467] Console: switching to colour frame buffer device 128x48
[    5.471842] fb0: radeondrmfb frame buffer device
[    5.471844] drm: registered panic notifier
[    5.471850] [drm] Initialized radeon 2.12.0 20080528 for 0000:00:01.0 on minor 0
[    5.471938] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.015112] mdadm: sending ioctl 800c0910 to a partition!
[    6.015117] mdadm: sending ioctl 800c0910 to a partition!
[    6.015124] mdadm: sending ioctl 1261 to a partition!
[    6.015125] mdadm: sending ioctl 1261 to a partition!
[    6.015145] mdadm: sending ioctl 800c0910 to a partition!
[    6.015150] mdadm: sending ioctl 800c0910 to a partition!
[    6.015157] mdadm: sending ioctl 1261 to a partition!
[    6.015158] mdadm: sending ioctl 1261 to a partition!
[    6.015598] mdadm: sending ioctl 800c0910 to a partition!
[    6.015602] mdadm: sending ioctl 800c0910 to a partition!
[    6.412933] md: md5 stopped.
[    6.414031] md: bind<sdb9>
[    6.425795] md: raid1 personality registered for level 1
[    6.425964] bio: create slab <bio-1> at 1
[    6.426078] md/raid1:md5: active with 1 out of 2 mirrors
[    6.426107] md5: detected capacity change from 0 to 184182964224
[    6.427145]  md5: unknown partition table
[    6.430020] md: md4 stopped.
[    6.431180] md: bind<sdb8>
[    6.434346] md/raid1:md4: active with 1 out of 2 mirrors
[    6.434374] md4: detected capacity change from 0 to 1019805696
[    6.435497]  md4: unknown partition table
[    6.437769] md: md3 stopped.
[    6.439006] md: bind<sdb7>
[    6.443201] md/raid1:md3: active with 1 out of 2 mirrors
[    6.443228] md3: detected capacity change from 0 to 2047934464
[    6.600411]  md3: unknown partition table
[    6.627716] md: md2 stopped.
[    6.628773] md: bind<sdb6>
[    6.630197] md/raid1:md2: active with 1 out of 2 mirrors
[    6.630223] md2: detected capacity change from 0 to 4096065536
[    6.631181]  md2: unknown partition table
[    6.633644] md: md1 stopped.
[    6.634651] md: bind<sdb5>
[    6.638737] md/raid1:md1: active with 1 out of 2 mirrors
[    6.638764] md1: detected capacity change from 0 to 8192262144
[    6.641860]  md1: unknown partition table
[    6.905424] md: md0 stopped.
[    6.906977] md: bind<sdb1>
[    6.908507] md/raid1:md0: active with 1 out of 2 mirrors
[    6.908533] md0: detected capacity change from 0 to 509804544
[    6.909804]  md0: unknown partition table
[    7.443009] Adding 1531900k swap on /dev/sda7.  Priority:-1 extents:1 across:1531900k
[    7.447301] EXT4-fs (sda1): re-mounted. Opts: (null)
[    7.846192] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.444140] loop: module loaded
[   10.194945] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[   10.269132] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   10.346148] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   10.429610] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   10.504538] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   10.505162] SGI XFS Quota Management subsystem
[   10.519824] XFS (dm-0): Mounting Filesystem
[   10.712546] XFS (dm-0): Ending clean mount
[   12.133182] r8169 0000:01:00.0: eth0: link down
[   12.133191] r8169 0000:01:00.0: eth0: link down
[   12.133476] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.694832] 8139too 0000:03:06.0: eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[   12.958684] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.337606] RPC: Registered named UNIX socket transport module.
[   13.337610] RPC: Registered udp transport module.
[   13.337611] RPC: Registered tcp transport module.
[   13.337613] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   13.380730] FS-Cache: Loaded
[   13.433775] FS-Cache: Netfs 'nfs' registered for caching
[   13.479374] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   13.853112] fuse init (API version 7.17)
[   13.857112] r8169 0000:01:00.0: eth0: link up
[   13.857358] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.929015] Intel AES-NI instructions are not detected.
[   15.161241] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.227442] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   16.684451] Bluetooth: RFCOMM TTY layer initialized
[   16.684456] Bluetooth: RFCOMM socket layer initialized
[   16.684458] Bluetooth: RFCOMM ver 1.11
[   16.716210] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.716214] Bluetooth: BNEP filters: protocol multicast
[   16.813242] lp: driver loaded but no devices found
[   16.829620] ppdev: user-space parallel port driver
[   23.160018] eth1: no IPv6 routers present
[   23.992024] eth0: no IPv6 routers present
[   25.888070] wlan0: no IPv6 routers present
[   61.078714] TCP: Possible SYN flooding on port 6882. Sending cookies.  Check SNMP counters.




Reply to: