Bug#664581: linux-image-3.2.0-2-amd64: mdadm starts before mpt2sas finds drives
Package: linux-2.6
Version: 3.2.9-1
Severity: normal
Software raid tries to assemble drives before mpt2sas finds them. The root
filesystem as /dev/md0 is raid5 with /boot on raid1 as /dev/md1. The
system still boots because
all of /boot and 2 of 3 root drives are on a different controller, where all
drives are recognized before assembly is attempted. This problem occurs before
INIT in the boot process. Later in the boot process, I manually start another
software raid 5 (as /dev/md2) and add the missing drive to root
after dropping into a shell when the system fails to find /dev/md2.
Booting with the 2.6.32-5 kernel works fine, when software raid waits for
all drives to be available before assembling. This is why I've assigned
this bug to the kernel. In both kernels, device-mapper starts before
raid assembly is attempted.
I'm running mdadm version 3.2.3-2 with 1.2 version superblocks on all disks.
-- Package-specific info:
** Version:
Linux version 3.2.0-2-amd64 (Debian 3.2.9-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Sun Mar 4 22:48:17 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=169803a1-01b4-4c75-827c-45e7eb984f5d ro quiet
** Not tainted
** Kernel log:
[ 5.965241] mpt2sas version 10.100.00.00 loaded
[ 5.965394] usbcore: registered new interface driver usbfs
[ 5.965421] usbcore: registered new interface driver hub
[ 5.965458] scsi0 : Fusion MPT SAS Host
[ 5.965490] usbcore: registered new device driver usb
[ 5.965940] mpt2sas 0000:04:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
[ 5.965968] mpt2sas 0000:04:00.0: setting latency timer to 64
[ 5.965973] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (65981036 kB)
[ 5.966101] mpt2sas 0000:04:00.0: irq 76 for MSI/MSI-X
[ 5.966121] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 76
[ 5.966124] mpt2sas0: iomem(0x00000000fbffc000), mapped(0xffffc90016f88000), size(16384)
[ 5.966127] mpt2sas0: ioport(0x000000000000e000), size(256)
[ 5.966360] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.966397] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.966426] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 5.966470] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 5.966484] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.966519] ehci_hcd 0000:00:12.2: debug port 1
[ 5.966546] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfaffe800
[ 5.966800] firewire_ohci 0000:01:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 5.976061] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 5.976094] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.976098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.976101] usb usb1: Product: EHCI Host Controller
[ 5.976103] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 5.976105] usb usb1: SerialNumber: 0000:00:12.2
[ 5.976248] hub 1-0:1.0: USB hub found
[ 5.976254] hub 1-0:1.0: 6 ports detected
[ 5.976378] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.976405] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 5.976414] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 5.976422] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.976448] ehci_hcd 0000:00:13.2: debug port 1
[ 5.976477] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfaffec00
[ 5.988056] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 5.988076] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.988079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.988082] usb usb2: Product: EHCI Host Controller
[ 5.988084] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 5.988086] usb usb2: SerialNumber: 0000:00:13.2
[ 5.988221] hub 2-0:1.0: USB hub found
[ 5.988226] hub 2-0:1.0: 6 ports detected
[ 5.988950] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.988973] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.988993] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 5.989002] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 5.989031] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfaff6000
[ 6.002570] libata version 3.00 loaded.
[ 6.020117] firewire_ohci: Added fw-ohci device 0000:01:02.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[ 6.048058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.048062] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.048065] usb usb3: Product: OHCI Host Controller
[ 6.048067] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 6.048069] usb usb3: SerialNumber: 0000:00:12.0
[ 6.048192] hub 3-0:1.0: USB hub found
[ 6.048203] hub 3-0:1.0: 3 ports detected
[ 6.048292] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.048346] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 6.048355] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 6.048377] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfaff7000
[ 6.067602] e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 14:da:e9:d6:76:d7
[ 6.067606] e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 6.067689] e1000e 0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 6.067708] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 6.067735] e1000e 0000:02:00.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47
[ 6.067755] e1000e 0000:02:00.0: setting latency timer to 64
[ 6.067948] e1000e 0000:02:00.0: irq 77 for MSI/MSI-X
[ 6.067957] e1000e 0000:02:00.0: irq 78 for MSI/MSI-X
[ 6.067965] e1000e 0000:02:00.0: irq 79 for MSI/MSI-X
[ 6.108064] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.108068] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.108071] usb usb4: Product: OHCI Host Controller
[ 6.108073] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 6.108075] usb usb4: SerialNumber: 0000:00:12.1
[ 6.108207] hub 4-0:1.0: USB hub found
[ 6.108218] hub 4-0:1.0: 3 ports detected
[ 6.108319] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.108350] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 6.108360] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 6.108392] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfaffc000
[ 6.168060] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.168064] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.168066] usb usb5: Product: OHCI Host Controller
[ 6.168069] usb usb5: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 6.168071] usb usb5: SerialNumber: 0000:00:13.0
[ 6.168194] hub 5-0:1.0: USB hub found
[ 6.168205] hub 5-0:1.0: 3 ports detected
[ 6.168298] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.168320] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 6.168329] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 6.168353] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfaffd000
[ 6.185303] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 14:da:e9:d6:77:69
[ 6.185307] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 6.185392] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 6.224061] mpt2sas0: sending diag reset !!
[ 6.228059] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.228063] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.228065] usb usb6: Product: OHCI Host Controller
[ 6.228067] usb usb6: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 6.228069] usb usb6: SerialNumber: 0000:00:13.1
[ 6.228199] hub 6-0:1.0: USB hub found
[ 6.228210] hub 6-0:1.0: 3 ports detected
[ 6.228302] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.228367] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 6.228379] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 6.228399] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfafff000
[ 6.288055] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.288059] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.288061] usb usb7: Product: OHCI Host Controller
[ 6.288063] usb usb7: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 6.288065] usb usb7: SerialNumber: 0000:00:14.5
[ 6.288191] hub 7-0:1.0: USB hub found
[ 6.288201] hub 7-0:1.0: 2 ports detected
[ 6.288301] ahci 0000:00:11.0: version 3.0
[ 6.288361] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.288525] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 6.288529] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 6.289275] scsi1 : ahci
[ 6.289376] scsi2 : ahci
[ 6.289467] scsi3 : ahci
[ 6.289555] scsi4 : ahci
[ 6.289905] ata1: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe500 irq 22
[ 6.289909] ata2: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe580 irq 22
[ 6.289913] ata3: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe600 irq 22
[ 6.289916] ata4: SATA max UDMA/133 abar m1024@0xfaffe400 port 0xfaffe680 irq 22
[ 6.289959] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.289999] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 6.290414] scsi5 : pata_atiixp
[ 6.290509] scsi6 : pata_atiixp
[ 6.291288] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 6.291291] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 6.472406] ata5.01: ATAPI: TSSTcorp CDDVDW SN-208BB, SB00, max UDMA/100
[ 6.488398] ata5.01: configured for UDMA/100
[ 6.520163] firewire_core: created device fw0: GUID 001e8c0000e52d0f, S400
[ 6.552061] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 6.721116] usb 3-1: New USB device found, idVendor=046d, idProduct=c517
[ 6.721121] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.721123] usb 3-1: Product: USB Receiver
[ 6.721126] usb 3-1: Manufacturer: Logitech
[ 6.780058] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.780084] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.780111] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.780711] ata3.00: ATA-8: ST33000651AS, CC44, max UDMA/133
[ 6.780715] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 6.780857] ata2.00: ATA-8: WDC WD1002FBYS-01A6B0, 03.00C05, max UDMA/133
[ 6.780860] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 6.781356] ata3.00: configured for UDMA/133
[ 6.782480] ata2.00: configured for UDMA/133
[ 6.784060] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.790199] ata4.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 6.790203] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 6.796367] ata4.00: configured for UDMA/133
[ 6.800609] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
[ 6.800612] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 6.802650] ata1.00: configured for UDMA/133
[ 6.802881] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 6.803166] scsi 2:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5
[ 6.803466] scsi 3:0:0:0: Direct-Access ATA ST33000651AS CC44 PQ: 0 ANSI: 5
[ 6.803757] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 6.813320] scsi 5:0:1:0: CD-ROM TSSTcorp CDDVDW SN-208BB SB00 PQ: 0 ANSI: 5
[ 6.820291] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.820303] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.820320] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 6.820388] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 6.820427] sd 3:0:0:0: [sdc] Write Protect is off
[ 6.820430] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.820438] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.820443] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.820470] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.820476] sd 4:0:0:0: [sdd] Write Protect is off
[ 6.820479] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 6.820494] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.820505] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.820526] sd 1:0:0:0: [sda] Write Protect is off
[ 6.820531] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.820599] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.851373] sda: sda1 sda2
[ 6.851824] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.856204] sdb: sdb1 sdb2
[ 6.856637] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 6.860110] sdd: sdd2
[ 6.860378] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 6.881641] sdc: sdc1 sdc2
[ 6.882020] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 6.895362] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.895366] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.895522] sr 5:0:1:0: Attached scsi CD-ROM sr0
[ 6.898098] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 6.898163] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.898219] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 6.898277] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 6.898339] sr 5:0:1:0: Attached scsi generic sg4 type 5
[ 6.984062] usb 3-2: new low-speed USB device number 3 using ohci_hcd
[ 7.306128] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 7.306132] usb 3-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 7.306135] usb 3-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
[ 7.306138] usb 3-2: Manufacturer: American Power Conversion
[ 7.306140] usb 3-2: SerialNumber: BB0714012294
[ 7.348047] mpt2sas0: diag reset: SUCCESS
[ 7.420055] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[ 7.496610] mpt2sas0: Allocated physical memory: size(3379 kB)
[ 7.496614] mpt2sas0: Current Controller Queue Depth(1481), Max Controller Queue Depth(1720)
[ 7.496617] mpt2sas0: Scatter Gather Elements per IO(128)
[ 7.569428] usb 2-3: New USB device found, idVendor=046b, idProduct=ff01
[ 7.569432] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.569434] usb 2-3: Product: Generic Hub
[ 7.569436] usb 2-3: Manufacturer: American Megatrends Inc.
[ 7.569439] usb 2-3: SerialNumber: serial
[ 7.570196] hub 2-3:1.0: USB hub found
[ 7.570427] hub 2-3:1.0: 3 ports detected
[ 7.728447] mpt2sas0: LSISAS2008: FWVersion(12.00.00.00), ChipRevision(0x03), BiosVersion(07.23.01.00)
[ 7.728451] mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 7.728579] mpt2sas0: sending port enable !!
[ 7.844915] usb 2-3.1: new low-speed USB device number 3 using ehci_hcd
[ 7.950009] usb 2-3.1: New USB device found, idVendor=046b, idProduct=ff10
[ 7.950013] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.950015] usb 2-3.1: Product: Virtual Keyboard and Mouse
[ 7.950018] usb 2-3.1: Manufacturer: American Megatrends Inc.
[ 7.950020] usb 2-3.1: SerialNumber: serial
[ 8.380287] generic-usb 0003:051D:0002.0003: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:12.0-2/input0
[ 8.381026] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3.1/2-3.1:1.0/input/input0
[ 8.381120] generic-usb 0003:046B:FF10.0004: input,hidraw1: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:13.2-3.1/input0
[ 8.381866] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3.1/2-3.1:1.1/input/input1
[ 8.381969] generic-usb 0003:046B:FF10.0005: input,hidraw2: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:13.2-3.1/input1
[ 8.381986] usbcore: registered new interface driver usbhid
[ 8.381988] usbhid: USB HID core driver
[ 8.388341] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
[ 8.388406] logitech 0003:046D:C517.0001: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
[ 8.396137] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 8.396695] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3
[ 8.396837] logitech 0003:046D:C517.0002: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
[ 8.603992] device-mapper: uevent: version 1.0.3
[ 8.604143] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 8.879216] md: raid1 personality registered for level 1
[ 8.881064] async_tx: api initialized (async)
[ 8.881545] xor: automatically using best checksumming function: generic_sse
[ 8.900026] generic_sse: 6278.000 MB/sec
[ 8.900028] xor: using function: generic_sse (6278.000 MB/sec)
[ 8.968024] raid6: int64x1 1186 MB/s
[ 9.036033] raid6: int64x2 1412 MB/s
[ 9.104064] raid6: int64x4 1373 MB/s
[ 9.172044] raid6: int64x8 1351 MB/s
[ 9.240038] raid6: sse2x1 2992 MB/s
[ 9.265682] mpt2sas0: host_add: handle(0x0001), sas_addr(0x500e018000154888), phys(8)
[ 9.308020] raid6: sse2x2 5647 MB/s
[ 9.376025] raid6: sse2x4 5461 MB/s
[ 9.376027] raid6: using algorithm sse2x2 (5647 MB/s)
[ 9.377284] md: raid6 personality registered for level 6
[ 9.377286] md: raid5 personality registered for level 5
[ 9.377289] md: raid4 personality registered for level 4
[ 9.418271] mdadm: sending ioctl 800c0910 to a partition!
[ 9.418274] mdadm: sending ioctl 800c0910 to a partition!
[ 9.418281] mdadm: sending ioctl 1261 to a partition!
[ 9.418284] mdadm: sending ioctl 1261 to a partition!
[ 9.419730] mdadm: sending ioctl 800c0910 to a partition!
[ 9.419733] mdadm: sending ioctl 800c0910 to a partition!
[ 9.419738] mdadm: sending ioctl 1261 to a partition!
[ 9.419740] mdadm: sending ioctl 1261 to a partition!
[ 9.420064] mdadm: sending ioctl 800c0910 to a partition!
[ 9.420067] mdadm: sending ioctl 800c0910 to a partition!
[ 9.425657] md: md1 stopped.
[ 9.426416] md: bind<sdb2>
[ 9.426603] md: bind<sda2>
[ 9.428272] bio: create slab <bio-1> at 1
[ 9.428360] md/raid1:md1: active with 2 out of 2 mirrors
[ 9.428395] md1: detected capacity change from 0 to 500104552448
[ 9.452340] md1: unknown partition table
[ 9.715693] md: md0 stopped.
[ 9.716465] md: bind<sdd2>
[ 9.716657] md: bind<sdc2>
[ 9.718386] md/raid:md0: device sdc2 operational as raid disk 0
[ 9.718390] md/raid:md0: device sdd2 operational as raid disk 1
[ 9.718878] md/raid:md0: allocated 3228kB
[ 9.718956] md/raid:md0: raid level 5 active with 2 out of 3 devices, algorithm 2
[ 9.719041] RAID conf printout:
[ 9.719043] --- level:5 rd:3 wd:2
[ 9.719045] disk 0, o:1, dev:sdc2
[ 9.719047] disk 1, o:1, dev:sdd2
[ 9.719074] md0: detected capacity change from 0 to 4000791396352
[ 9.728460] md0: unknown partition table
[ 10.056678] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 12.042416] udev[585]: starting version 164
[ 12.273016] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.273024] ACPI: Power Button [PWRB]
[ 12.352126] ACPI: acpi_idle registered with cpuidle
[ 12.389478] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 12.405667] MCE: In-kernel MCE decoding enabled.
[ 12.456143] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20, revision 0
[ 12.544652] EDAC MC: Ver: 2.1.0
[ 12.558620] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 12.558821] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 12.616378] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 12.616772] ACPI: Power Button [PWRF]
[ 12.619882] AMD64 EDAC driver v3.4.0
[ 12.620083] EDAC amd64: DRAM ECC enabled.
[ 12.620108] EDAC amd64: F15h detected (node 0).
[ 12.620210] EDAC MC: DCT0 chip selects:
[ 12.620213] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.620215] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 12.620218] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.620220] EDAC amd64: MC: 6: 4096MB 7: 4096MB
[ 12.620221] EDAC MC: DCT1 chip selects:
[ 12.620223] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.620226] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 12.620227] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.620230] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 12.620231] EDAC amd64: using x4 syndromes.
[ 12.620233] EDAC amd64: MCT channel count: 1
[ 12.620290] EDAC amd64: CS2: Registered DDR3 RAM
[ 12.620292] EDAC amd64: CS3: Registered DDR3 RAM
[ 12.620294] EDAC amd64: CS6: Registered DDR3 RAM
[ 12.620296] EDAC amd64: CS7: Registered DDR3 RAM
[ 12.620469] EDAC MC0: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:18.2
[ 12.620511] EDAC amd64: DRAM ECC enabled.
[ 12.620531] EDAC amd64: F15h detected (node 1).
[ 12.620641] EDAC MC: DCT0 chip selects:
[ 12.620644] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.620647] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 12.620649] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.620651] EDAC amd64: MC: 6: 4096MB 7: 4096MB
[ 12.620653] EDAC MC: DCT1 chip selects:
[ 12.620655] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.620657] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 12.620659] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.620660] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 12.620662] EDAC amd64: using x4 syndromes.
[ 12.620664] EDAC amd64: MCT channel count: 1
[ 12.620716] EDAC amd64: CS2: Registered DDR3 RAM
[ 12.620719] EDAC amd64: CS3: Registered DDR3 RAM
[ 12.620721] EDAC amd64: CS6: Registered DDR3 RAM
[ 12.620722] EDAC amd64: CS7: Registered DDR3 RAM
[ 12.620839] EDAC MC1: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:19.2
[ 12.620853] EDAC amd64: DRAM ECC enabled.
[ 12.620873] EDAC amd64: F15h detected (node 2).
[ 12.620974] EDAC MC: DCT0 chip selects:
[ 12.620977] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.620979] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 12.620981] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.620983] EDAC amd64: MC: 6: 4096MB 7: 4096MB
[ 12.620985] EDAC MC: DCT1 chip selects:
[ 12.620987] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.620989] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 12.620991] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.620993] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 12.620995] EDAC amd64: using x4 syndromes.
[ 12.620997] EDAC amd64: MCT channel count: 1
[ 12.621014] EDAC amd64: CS2: Registered DDR3 RAM
[ 12.621017] EDAC amd64: CS3: Registered DDR3 RAM
[ 12.621019] EDAC amd64: CS6: Registered DDR3 RAM
[ 12.621020] EDAC amd64: CS7: Registered DDR3 RAM
[ 12.621077] EDAC MC2: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1a.2
[ 12.621093] EDAC amd64: DRAM ECC enabled.
[ 12.621114] EDAC amd64: F15h detected (node 3).
[ 12.621217] EDAC MC: DCT0 chip selects:
[ 12.621219] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.621221] EDAC amd64: MC: 2: 4096MB 3: 4096MB
[ 12.621223] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.621225] EDAC amd64: MC: 6: 4096MB 7: 4096MB
[ 12.621227] EDAC MC: DCT1 chip selects:
[ 12.621229] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 12.621231] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 12.621233] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 12.621235] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 12.621237] EDAC amd64: using x4 syndromes.
[ 12.621239] EDAC amd64: MCT channel count: 1
[ 12.621311] EDAC amd64: CS2: Registered DDR3 RAM
[ 12.621313] EDAC amd64: CS3: Registered DDR3 RAM
[ 12.621316] EDAC amd64: CS6: Registered DDR3 RAM
[ 12.621317] EDAC amd64: CS7: Registered DDR3 RAM
[ 12.621438] EDAC MC3: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1b.2
[ 12.621508] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 13.054391] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.092955] hda_codec: ALC888: BIOS auto-probing.
[ 13.103609] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 14.008816] EXT4-fs (md0): re-mounted. Opts: (null)
[ 14.439423] EXT4-fs (md0): re-mounted. Opts: data=ordered,errors=remount-ro
[ 14.582137] scsi_verify_blk_ioctl: 196 callbacks suppressed
[ 14.582141] mdadm: sending ioctl 800c0910 to a partition!
[ 14.582144] mdadm: sending ioctl 800c0910 to a partition!
[ 14.582154] mdadm: sending ioctl 1261 to a partition!
[ 14.582156] mdadm: sending ioctl 1261 to a partition!
[ 14.582368] mdadm: sending ioctl 800c0910 to a partition!
[ 14.582370] mdadm: sending ioctl 800c0910 to a partition!
[ 14.582374] mdadm: sending ioctl 1261 to a partition!
[ 14.582376] mdadm: sending ioctl 1261 to a partition!
[ 14.582536] mdadm: sending ioctl 800c0910 to a partition!
[ 14.582539] mdadm: sending ioctl 800c0910 to a partition!
[ 14.588478] loop: module loaded
[ 15.404095] mpt2sas0: port enable: SUCCESS
[ 15.407160] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 A20N PQ: 0 ANSI: 6
[ 15.407168] scsi 0:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x5000cca221c159e1)
[ 15.407171] scsi 0:0:0:0: SATA: enclosure_logical_id(0x500e018000154888), slot(3)
[ 15.407252] scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 15.407256] scsi 0:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[ 15.408330] scsi 0:0:1:0: Direct-Access ATA M4-CT256M4SSD2 0009 PQ: 0 ANSI: 6
[ 15.408336] scsi 0:0:1:0: SATA: handle(0x000a), sas_addr(0x4433221105000000), phy(5), device_name(0x500a0751031bd25f)
[ 15.408339] scsi 0:0:1:0: SATA: enclosure_logical_id(0x500e018000154888), slot(6)
[ 15.408420] scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 15.408424] scsi 0:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[ 15.409598] scsi 0:0:2:0: Direct-Access ATA M4-CT256M4SSD2 0009 PQ: 0 ANSI: 6
[ 15.409604] scsi 0:0:2:0: SATA: handle(0x000b), sas_addr(0x4433221107000000), phy(7), device_name(0x500a0751031bd296)
[ 15.409608] scsi 0:0:2:0: SATA: enclosure_logical_id(0x500e018000154888), slot(4)
[ 15.409685] scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 15.409689] scsi 0:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[ 15.410668] scsi 0:0:3:0: Direct-Access ATA M4-CT256M4SSD2 0009 PQ: 0 ANSI: 6
[ 15.410677] scsi 0:0:3:0: SATA: handle(0x000c), sas_addr(0x4433221104000000), phy(4), device_name(0x500a0751031b1424)
[ 15.410681] scsi 0:0:3:0: SATA: enclosure_logical_id(0x500e018000154888), slot(7)
[ 15.410765] scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 15.410771] scsi 0:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
[ 15.411336] sd 0:0:0:0: Attached scsi generic sg5 type 0
[ 15.411670] sd 0:0:1:0: Attached scsi generic sg6 type 0
[ 15.411914] sd 0:0:1:0: [sdf] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 15.411950] sd 0:0:2:0: Attached scsi generic sg7 type 0
[ 15.412262] sd 0:0:2:0: [sdg] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 15.412306] sd 0:0:3:0: Attached scsi generic sg8 type 0
[ 15.412372] sd 0:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 15.412625] sd 0:0:3:0: [sdh] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 15.415806] sd 0:0:1:0: [sdf] Write Protect is off
[ 15.415814] sd 0:0:1:0: [sdf] Mode Sense: 7f 00 00 08
[ 15.416354] sd 0:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.417335] sd 0:0:3:0: [sdh] Write Protect is off
[ 15.417337] sd 0:0:3:0: [sdh] Mode Sense: 7f 00 00 08
[ 15.417804] sd 0:0:2:0: [sdg] Write Protect is off
[ 15.417806] sd 0:0:2:0: [sdg] Mode Sense: 7f 00 00 08
[ 15.417877] sd 0:0:3:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.418447] sd 0:0:2:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.422622] sdf: sdf1
[ 15.425524] sdh: sdh1
[ 15.428114] sd 0:0:1:0: [sdf] Attached SCSI disk
[ 15.429115] sdg: sdg1
[ 15.432154] sd 0:0:3:0: [sdh] Attached SCSI disk
[ 15.437017] sd 0:0:2:0: [sdg] Attached SCSI disk
[ 15.695810] sd 0:0:0:0: [sde] Write Protect is off
[ 15.695818] sd 0:0:0:0: [sde] Mode Sense: 7f 00 00 08
[ 15.698293] sd 0:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.015539] sde: sde2
[ 16.307599] sd 0:0:0:0: [sde] Attached SCSI disk
[ 31.840769] scsi_verify_blk_ioctl: 30 callbacks suppressed
[ 31.840773] mdadm: sending ioctl 800c0910 to a partition!
[ 31.840776] mdadm: sending ioctl 800c0910 to a partition!
[ 31.840781] mdadm: sending ioctl 1261 to a partition!
[ 31.840784] mdadm: sending ioctl 1261 to a partition!
[ 31.840916] mdadm: sending ioctl 800c0910 to a partition!
[ 31.840920] mdadm: sending ioctl 800c0910 to a partition!
[ 31.840926] mdadm: sending ioctl 1261 to a partition!
[ 31.840929] mdadm: sending ioctl 1261 to a partition!
[ 31.840962] mdadm: sending ioctl 1261 to a partition!
[ 31.840964] mdadm: sending ioctl 1261 to a partition!
[ 34.705312] Adding 134217724k swap on /var/lib/swap/128gb.swap. Priority:-1 extents:2152 across:163586044k
[ 45.929666] scsi_verify_blk_ioctl: 96 callbacks suppressed
[ 45.929670] mdadm: sending ioctl 800c0910 to a partition!
[ 45.929672] mdadm: sending ioctl 800c0910 to a partition!
[ 45.929678] mdadm: sending ioctl 1261 to a partition!
[ 45.929680] mdadm: sending ioctl 1261 to a partition!
[ 45.930345] mdadm: sending ioctl 800c0910 to a partition!
[ 45.930349] mdadm: sending ioctl 800c0910 to a partition!
[ 45.930354] mdadm: sending ioctl 1261 to a partition!
[ 45.930355] mdadm: sending ioctl 1261 to a partition!
[ 45.930926] mdadm: sending ioctl 800c0910 to a partition!
[ 45.930928] mdadm: sending ioctl 800c0910 to a partition!
[ 45.987863] md: md2 stopped.
[ 45.989448] md: bind<sdf1>
[ 45.989817] md: bind<sdg1>
[ 45.990137] md: bind<sdh1>
[ 45.992546] md/raid:md2: device sdh1 operational as raid disk 0
[ 45.992549] md/raid:md2: device sdg1 operational as raid disk 2
[ 45.992552] md/raid:md2: device sdf1 operational as raid disk 1
[ 45.993165] md/raid:md2: allocated 3228kB
[ 45.993391] md/raid:md2: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 45.993393] RAID conf printout:
[ 45.993394] --- level:5 rd:3 wd:3
[ 45.993396] disk 0, o:1, dev:sdh1
[ 45.993398] disk 1, o:1, dev:sdf1
[ 45.993400] disk 2, o:1, dev:sdg1
[ 45.993440] md2: detected capacity change from 0 to 479993004032
[ 45.996425] md2: unknown partition table
[ 54.014609] md: md2 switched to read-write mode.
[ 54.019571] scsi_verify_blk_ioctl: 134 callbacks suppressed
[ 54.019574] mdadm: sending ioctl 1261 to a partition!
[ 54.019577] mdadm: sending ioctl 1261 to a partition!
[ 62.295148] mdadm: sending ioctl 1261 to a partition!
[ 62.295155] mdadm: sending ioctl 1261 to a partition!
[ 62.298254] mdadm: sending ioctl 1261 to a partition!
[ 62.298257] mdadm: sending ioctl 1261 to a partition!
[ 62.299122] md: export_rdev(sde2)
[ 62.303793] mdadm: sending ioctl 1261 to a partition!
[ 62.303796] mdadm: sending ioctl 1261 to a partition!
[ 71.830863] mdadm: sending ioctl 1261 to a partition!
[ 71.830867] mdadm: sending ioctl 1261 to a partition!
[ 71.831279] mdadm: sending ioctl 1261 to a partition!
[ 71.831283] mdadm: sending ioctl 1261 to a partition!
[ 71.831798] mdadm: sending ioctl 1261 to a partition!
[ 71.831801] mdadm: sending ioctl 1261 to a partition!
[ 71.832169] mdadm: sending ioctl 1261 to a partition!
[ 71.832172] mdadm: sending ioctl 1261 to a partition!
[ 71.832738] mdadm: sending ioctl 1261 to a partition!
[ 71.832740] mdadm: sending ioctl 1261 to a partition!
[ 73.410428] md: bind<sde2>
[ 73.436126] RAID conf printout:
[ 73.436132] --- level:5 rd:3 wd:2
[ 73.436137] disk 0, o:1, dev:sdc2
[ 73.436142] disk 1, o:1, dev:sdd2
[ 73.436145] disk 2, o:1, dev:sde2
[ 73.436376] md: recovery of RAID array md0
[ 73.436381] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 73.436386] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
[ 73.436412] md: using 128k window, over a total of 1953511424k.
[ 91.496185] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 91.513207] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[ 92.410170] RPC: Registered named UNIX socket transport module.
[ 92.410174] RPC: Registered udp transport module.
[ 92.410176] RPC: Registered tcp transport module.
[ 92.410178] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 92.463103] FS-Cache: Loaded
[ 92.508115] FS-Cache: Netfs 'nfs' registered for caching
[ 92.524758] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 92.794535] fuse init (API version 7.17)
[ 93.662023] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 93.741194] NFSD: starting 90-second grace period
[ 95.232348] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 95.310542] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 98.837056] Bluetooth: Core ver 2.16
[ 98.837081] NET: Registered protocol family 31
[ 98.837083] Bluetooth: HCI device and connection manager initialized
[ 98.837087] Bluetooth: HCI socket layer initialized
[ 98.837090] Bluetooth: L2CAP socket layer initialized
[ 98.837097] Bluetooth: SCO socket layer initialized
[ 98.883617] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 98.883620] Bluetooth: BNEP filters: protocol multicast
[ 98.921619] Bridge firewalling registered
[ 98.929047] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 98.931275] Bluetooth: RFCOMM TTY layer initialized
[ 98.931281] Bluetooth: RFCOMM socket layer initialized
[ 98.931281] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 98.931291] Bluetooth: RFCOMM ver 1.11
[ 99.337696] lp: driver loaded but no devices found
[ 99.341852] ppdev: user-space parallel port driver
[ 102.613620] sshd (3016): /proc/3016/oom_adj is deprecated, please use /proc/3016/oom_score_adj instead.
[ 109.184067] eth0: no IPv6 routers present
[ 520.728976] scsi_verify_blk_ioctl: 72 callbacks suppressed
[ 520.728980] mdadm: sending ioctl 1261 to a partition!
[ 520.728984] mdadm: sending ioctl 1261 to a partition!
[ 521.174856] mdadm: sending ioctl 1261 to a partition!
[ 521.174860] mdadm: sending ioctl 1261 to a partition!
[ 521.383167] mdadm: sending ioctl 1261 to a partition!
[ 521.383171] mdadm: sending ioctl 1261 to a partition!
[ 521.579697] mdadm: sending ioctl 1261 to a partition!
[ 521.579702] mdadm: sending ioctl 1261 to a partition!
[ 521.767969] mdadm: sending ioctl 1261 to a partition!
[ 521.767972] mdadm: sending ioctl 1261 to a partition!
[ 525.953001] scsi_verify_blk_ioctl: 30 callbacks suppressed
[ 525.953005] mdadm: sending ioctl 1261 to a partition!
[ 525.953007] mdadm: sending ioctl 1261 to a partition!
[ 526.354406] mdadm: sending ioctl 1261 to a partition!
[ 526.354409] mdadm: sending ioctl 1261 to a partition!
[ 526.576297] mdadm: sending ioctl 1261 to a partition!
[ 526.576301] mdadm: sending ioctl 1261 to a partition!
[ 526.708821] mdadm: sending ioctl 1261 to a partition!
[ 526.708825] mdadm: sending ioctl 1261 to a partition!
[ 527.009081] mdadm: sending ioctl 1261 to a partition!
[ 527.009085] mdadm: sending ioctl 1261 to a partition!
[ 530.042800] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 530.044090] SGI XFS Quota Management subsystem
[ 530.066499] JFS: nTxBlock = 8192, nTxLock = 65536
[ 530.238045] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 530.446647] QNX4 filesystem 0.2.3 registered.
[ 530.691453] Btrfs loaded
[ 531.536589] scsi_verify_blk_ioctl: 22 callbacks suppressed
[ 531.536600] blockdev: sending ioctl 125d to a partition!
[ 531.536606] blockdev: sending ioctl 125d to a partition!
[ 531.542213] blockdev: sending ioctl 125d to a partition!
[ 531.542217] blockdev: sending ioctl 125d to a partition!
[ 531.625234] blockdev: sending ioctl 125d to a partition!
[ 531.625238] blockdev: sending ioctl 125d to a partition!
[ 531.630654] blockdev: sending ioctl 125d to a partition!
[ 531.630658] blockdev: sending ioctl 125d to a partition!
[ 531.683933] blockdev: sending ioctl 125d to a partition!
[ 531.683937] blockdev: sending ioctl 125d to a partition!
[ 572.705071] scsi_verify_blk_ioctl: 22 callbacks suppressed
[ 572.705075] mdadm: sending ioctl 800c0910 to a partition!
[ 572.705079] mdadm: sending ioctl 800c0910 to a partition!
[ 572.705084] mdadm: sending ioctl 1261 to a partition!
[ 572.705086] mdadm: sending ioctl 1261 to a partition!
[ 572.732547] mdadm: sending ioctl 1261 to a partition!
[ 572.732551] mdadm: sending ioctl 1261 to a partition!
[ 572.733331] mdadm: sending ioctl 1261 to a partition!
[ 572.733335] mdadm: sending ioctl 1261 to a partition!
[ 572.754250] mdadm: sending ioctl 1261 to a partition!
[ 572.754254] mdadm: sending ioctl 1261 to a partition!
[ 577.720326] scsi_verify_blk_ioctl: 260 callbacks suppressed
[ 577.720330] mdadm: sending ioctl 1261 to a partition!
[ 577.720334] mdadm: sending ioctl 1261 to a partition!
[ 577.874882] mdadm: sending ioctl 1261 to a partition!
[ 577.874886] mdadm: sending ioctl 1261 to a partition!
[ 578.244653] mdadm: sending ioctl 1261 to a partition!
[ 578.244657] mdadm: sending ioctl 1261 to a partition!
[ 578.553691] mdadm: sending ioctl 1261 to a partition!
[ 578.553695] mdadm: sending ioctl 1261 to a partition!
[ 578.691846] mdadm: sending ioctl 1261 to a partition!
[ 578.691850] mdadm: sending ioctl 1261 to a partition!
[ 583.012588] scsi_verify_blk_ioctl: 34 callbacks suppressed
[ 583.012592] mdadm: sending ioctl 1261 to a partition!
[ 583.012594] mdadm: sending ioctl 1261 to a partition!
[ 583.160872] mdadm: sending ioctl 1261 to a partition!
[ 583.160877] mdadm: sending ioctl 1261 to a partition!
[ 583.415308] mdadm: sending ioctl 1261 to a partition!
[ 583.415312] mdadm: sending ioctl 1261 to a partition!
[ 583.559462] mdadm: sending ioctl 1261 to a partition!
[ 583.559466] mdadm: sending ioctl 1261 to a partition!
[ 585.856352] blockdev: sending ioctl 125d to a partition!
[ 585.856357] blockdev: sending ioctl 125d to a partition!
[ 590.535407] scsi_verify_blk_ioctl: 30 callbacks suppressed
[ 590.535410] mdadm: sending ioctl 1261 to a partition!
[ 590.535413] mdadm: sending ioctl 1261 to a partition!
[ 590.707200] mdadm: sending ioctl 1261 to a partition!
[ 590.707204] mdadm: sending ioctl 1261 to a partition!
[ 590.910826] mdadm: sending ioctl 1261 to a partition!
[ 590.910829] mdadm: sending ioctl 1261 to a partition!
[ 591.092287] mdadm: sending ioctl 1261 to a partition!
[ 591.092291] mdadm: sending ioctl 1261 to a partition!
[ 591.327256] mdadm: sending ioctl 1261 to a partition!
[ 591.327259] mdadm: sending ioctl 1261 to a partition!
[ 598.033122] scsi_verify_blk_ioctl: 10 callbacks suppressed
[ 598.033126] mdadm: sending ioctl 1261 to a partition!
[ 598.033129] mdadm: sending ioctl 1261 to a partition!
[ 598.177278] mdadm: sending ioctl 1261 to a partition!
[ 598.177281] mdadm: sending ioctl 1261 to a partition!
[ 598.368467] mdadm: sending ioctl 1261 to a partition!
[ 598.368470] mdadm: sending ioctl 1261 to a partition!
[ 598.523167] mdadm: sending ioctl 1261 to a partition!
[ 598.523170] mdadm: sending ioctl 1261 to a partition!
[ 598.804468] mdadm: sending ioctl 1261 to a partition!
[ 598.804473] mdadm: sending ioctl 1261 to a partition!
[ 785.802734] mdadm: sending ioctl 1261 to a partition!
[ 785.802738] mdadm: sending ioctl 1261 to a partition!
[ 785.809743] mdadm: sending ioctl 1261 to a partition!
[ 785.809747] mdadm: sending ioctl 1261 to a partition!
[ 785.820993] mdadm: sending ioctl 1261 to a partition!
[ 785.820997] mdadm: sending ioctl 1261 to a partition!
[ 785.866581] mdadm: sending ioctl 1261 to a partition!
[ 785.866585] mdadm: sending ioctl 1261 to a partition!
[ 785.867392] mdadm: sending ioctl 1261 to a partition!
[ 785.867395] mdadm: sending ioctl 1261 to a partition!
[ 791.295675] scsi_verify_blk_ioctl: 4 callbacks suppressed
[ 791.295679] mdadm: sending ioctl 1261 to a partition!
[ 791.295682] mdadm: sending ioctl 1261 to a partition!
[ 791.521783] mdadm: sending ioctl 1261 to a partition!
[ 791.521787] mdadm: sending ioctl 1261 to a partition!
[ 791.720210] mdadm: sending ioctl 1261 to a partition!
[ 791.720223] mdadm: sending ioctl 1261 to a partition!
[ 791.888718] mdadm: sending ioctl 1261 to a partition!
[ 791.888722] mdadm: sending ioctl 1261 to a partition!
[ 792.513890] mdadm: sending ioctl 1261 to a partition!
[ 792.513894] mdadm: sending ioctl 1261 to a partition!
[ 796.375033] scsi_verify_blk_ioctl: 30 callbacks suppressed
[ 796.375037] mdadm: sending ioctl 1261 to a partition!
[ 796.375039] mdadm: sending ioctl 1261 to a partition!
[ 796.712557] mdadm: sending ioctl 1261 to a partition!
[ 796.712561] mdadm: sending ioctl 1261 to a partition!
[ 797.039843] mdadm: sending ioctl 1261 to a partition!
[ 797.039847] mdadm: sending ioctl 1261 to a partition!
[ 797.406848] mdadm: sending ioctl 1261 to a partition!
[ 797.406852] mdadm: sending ioctl 1261 to a partition!
[ 797.677287] mdadm: sending ioctl 1261 to a partition!
[ 797.677291] mdadm: sending ioctl 1261 to a partition!
[ 803.691006] scsi_verify_blk_ioctl: 20 callbacks suppressed
[ 803.691009] blockdev: sending ioctl 125d to a partition!
[ 803.691012] blockdev: sending ioctl 125d to a partition!
[ 803.697016] blockdev: sending ioctl 125d to a partition!
[ 803.697021] blockdev: sending ioctl 125d to a partition!
[ 803.745994] blockdev: sending ioctl 125d to a partition!
[ 803.745999] blockdev: sending ioctl 125d to a partition!
[ 803.752319] blockdev: sending ioctl 125d to a partition!
[ 803.752324] blockdev: sending ioctl 125d to a partition!
[ 803.875963] blockdev: sending ioctl 125d to a partition!
[ 803.875967] blockdev: sending ioctl 125d to a partition!
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 2102
board_vendor: ASUSTeK Computer INC.
board_name: KGP(M)E-D16
board_version: Rev 1.xxG
** Loaded modules:
btrfs
zlib_deflate
crc32c
libcrc32c
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext3
jbd
ext2
mperf
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
cpufreq_userspace
parport_pc
ppdev
lp
parport
rfcomm
bridge
stp
bnep
bluetooth
rfkill
binfmt_misc
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
loop
firewire_sbp2
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
snd_seq
snd_timer
snd_seq_device
snd
soundcore
snd_page_alloc
amd64_edac_mod
fam15h_power
k10temp
sp5100_tco
edac_core
tpm_tis
tpm
tpm_bios
i2c_piix4
i2c_core
edac_mce_amd
evdev
joydev
pcspkr
psmouse
processor
button
container
thermal_sys
serio_raw
ext4
mbcache
jbd2
crc16
raid456
async_raid6_recov
async_pq
raid6_pq
async_xor
xor
async_memcpy
async_tx
raid1
md_mod
dm_mirror
dm_region_hash
dm_log
dm_mod
hid_logitech
ff_memless
usbhid
hid
sg
sr_mod
cdrom
sd_mod
crc_t10dif
ata_generic
pata_atiixp
ahci
libahci
libata
ohci_hcd
firewire_ohci
ehci_hcd
firewire_core
crc_itu_t
mpt2sas
usbcore
scsi_transport_sas
raid_class
e1000e
scsi_mod
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only dual slot (2x16) PCI-e GFX Hydra part [1002:5a10] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8448]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
00:00.2 Generic system peripheral [0806]: ATI Technologies Inc Device [1002:5a23]
Subsystem: ATI Technologies Inc Device [1002:5a23]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 72
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) [1002:5a1c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9000 [size=4]
Region 2: I/O ports at 8000 [size=8]
Region 3: I/O ports at 7000 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at faffe400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at faff6000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at faff7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at faffe800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at faffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at faffec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3d)
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at faff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fb000000-fbcfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fafff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:1a.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:1a.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: fam15h_power
00:1a.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1b.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:1b.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:1b.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:01.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 10) (prog-if 00 [VGA controller])
Subsystem: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
Region 1: Memory at fbcc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at bc00 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
01:02.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8259]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fbcff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: ASUSTeK Computer Inc. Device [1043:8369]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at fbde0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cc00 [size=32]
Region 3: Memory at fbddc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: ASUSTeK Computer Inc. Device [1043:8369]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at fbee0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at dc00 [size=32]
Region 3: Memory at fbedc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
04:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:843c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at fbf80000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbf00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: mpt2sas
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 003 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046b:ff10 American Megatrends, Inc.
Bus 002 Device 002: ID 046b:ff01 American Megatrends, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.4
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates'), (400, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/32 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.101 generic modular initramfs generato
ii linux-base 3.5 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-3.2.0-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-3.2.0-2-amd64 suggests:
ii grub-pc 1.99-17 GRand Unified Bootloader, version
ii linux-doc-3.2 3.2.9-1 Linux kernel specific documentatio
Versions of packages linux-image-3.2.0-2-amd64 is related to:
pn firmware-atheros <none> (no description available)
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-brcm80211 <none> (no description available)
pn firmware-intelwimax <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-libertas <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-myricom <none> (no description available)
pn firmware-netxen <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn firmware-realtek <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64:
linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true
linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false
Reply to: