Bug#661861: PC Engines Alix 3C2: Boot hang waiting for /dev to be fully populated
Hi Jonathan,
On 02/03/12 01:19, Jonathan Nieder wrote:
> Thanks for reporting it. Please attach output from "reportbug
> --template linux-image-$(uname -r)", so we can get to know your
> system. Full boot logs from a working and non-working kernel would
> also be helpful.
I seem to have solved this issue by upgrading the BIOS on the system
from v0.98 to v0.99h. It would be nice to find the root cause of the
issue though so that it doesn't catch others out.
I have attached bootlogs from 2.6.32-5-686 and 3.2.0-1-486 under each
BIOS.
Thanks,
Jon
-- Package-specific info:
** Version:
Linux version 3.2.0-1-486 (Debian 3.2.6-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 Fri Feb 17 05:23:41 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-486 root=UUID=8aa1c103-24fd-4367-9659-f572d602f750 ro console=ttyS0,38400n8 quiet
** Not tainted
** Kernel log:
[ 2.612442] isapnp: No Plug & Play device found
[ 2.612725] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.612979] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 2.613307] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 2.614532] ttyS2: detected caps 00000700 should be 00000500
[ 2.614561] 0000:00:0c.0: ttyS2 at I/O 0x1400 (irq = 9) is a 16C950/954
[ 2.615014] ttyS3: detected caps 00000700 should be 00000500
[ 2.615040] 0000:00:0c.0: ttyS3 at I/O 0x1408 (irq = 9) is a 16C950/954
[ 2.615269] Couldn't register serial port 0000:00:0c.0: -28
[ 2.616112] Linux agpgart interface v0.103
[ 2.617373] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.618259] i8042: No controller found
[ 2.621899] mousedev: PS/2 mouse device common for all mice
[ 2.622406] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.622465] rtc0: alarms up to one day, 114 bytes nvram
[ 2.622790] EISA: Probing bus 0 at eisa.0
[ 2.622819] Cannot allocate resource for EISA slot 1
[ 2.622889] Cannot allocate resource for EISA slot 6
[ 2.622930] EISA: Detected 0 cards.
[ 2.622945] cpuidle: using governor ladder
[ 2.622961] cpuidle: using governor menu
[ 2.624663] TCP cubic registered
[ 2.624812] NET: Registered protocol family 10
[ 2.628425] Mobile IPv6
[ 2.628442] NET: Registered protocol family 17
[ 2.628469] Registering the dns_resolver key type
[ 2.628588] Using IPI Shortcut mode
[ 2.629185] PM: Hibernation image not present or could not be loaded.
[ 2.629235] registered taskstats version 1
[ 2.629906] rtc_cmos rtc_cmos: setting system clock to 2012-03-03 14:27:31 UTC (1330784851)
[ 2.630131] Initializing network drop monitor service
[ 2.630694] Freeing unused kernel memory: 444k freed
[ 2.631632] Write protecting the kernel text: 2564k
[ 2.631830] Write protecting the kernel read-only data: 1044k
[ 2.672140] udevd[42]: starting version 175
[ 2.809522] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 2.809622] via-rhine 0000:00:09.0: setting latency timer to 64
[ 2.874803] via-rhine 0000:00:09.0: eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:00:13:00:00, IRQ 10
[ 2.875554] via-rhine 0000:00:09.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1
[ 2.998112] SCSI subsystem initialized
[ 3.007367] usbcore: registered new interface driver usbfs
[ 3.007494] usbcore: registered new interface driver hub
[ 3.016007] usbcore: registered new device driver usb
[ 3.018806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.018952] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 3.018976] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 3.019060] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.053758] ehci_hcd 0000:00:0f.5: irq 12, io mem 0xefffd000
[ 3.064011] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.064136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.064161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.064181] usb usb1: Product: EHCI Host Controller
[ 3.064200] usb usb1: Manufacturer: Linux 3.2.0-1-486 ehci_hcd
[ 3.064218] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.064955] hub 1-0:1.0: USB hub found
[ 3.064988] hub 1-0:1.0: 4 ports detected
[ 3.084837] libata version 3.00 loaded.
[ 3.086485] pata_amd 0000:00:0f.2: version 0.4.1
[ 3.099038] scsi0 : pata_amd
[ 3.107303] scsi1 : pata_amd
[ 3.107765] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.107790] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 3.114445] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.114594] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 3.114619] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 3.114679] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 3.114752] ohci_hcd 0000:00:0f.4: irq 12, io mem 0xefffe000
[ 3.199698] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.199727] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.199747] usb usb2: Product: OHCI Host Controller
[ 3.199766] usb usb2: Manufacturer: Linux 3.2.0-1-486 ohci_hcd
[ 3.199784] usb usb2: SerialNumber: 0000:00:0f.4
[ 3.201000] hub 2-0:1.0: USB hub found
[ 3.201035] hub 2-0:1.0: 4 ports detected
[ 3.247667] Switching to clocksource tsc
[ 3.271952] ata1.00: CFA: TS8GCF133, 20101110, max UDMA/66
[ 3.271976] ata1.00: 15662304 sectors, multi 0: LBA
[ 3.287846] ata1.00: configured for UDMA/66
[ 3.288316] scsi 0:0:0:0: Direct-Access ATA TS8GCF133 2010 PQ: 0 ANSI: 5
[ 3.289713] ata2: port disabled--ignoring
[ 3.340631] sd 0:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 3.340941] sd 0:0:0:0: [sda] Write Protect is off
[ 3.340966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.341103] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.345063] sda: sda1 sda2
[ 3.347161] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3.710364] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.458136] udevd[172]: starting version 175
[ 4.800701] AMD Geode RNG detected
[ 4.973658] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 5.011525] Intel AES-NI instructions are not detected.
[ 5.250333] geode-aes: GEODE AES engine enabled.
[ 5.251256] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff]
[ 5.251285] cs5535-gpio cs5535-gpio: GPIO support successfully loaded.
[ 5.252326] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 5.438030] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0x623f]
[ 5.438066] cs5535-mfgpt cs5535-mfgpt: 8 MFGPT timers available
[ 5.447386] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
[ 5.712233] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.731470] via-rhine 0000:00:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
** Model information
not available
** Loaded modules:
scx200_acb
cs5535_mfgpt
i2c_core
evdev
ecb
cryptd
pcspkr
aes_i586
aes_generic
cs5535_mfd
geode_aes
geode_rng
rng_core
ext4
mbcache
jbd2
crc16
sd_mod
crc_t10dif
ata_generic
pata_cs5536
ohci_hcd
pata_amd
libata
ehci_hcd
usbcore
scsi_mod
usb_common
via_rhine
mii
** PCI devices:
00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: I/O ports at ac1c [size=4]
00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: Geode LX AES
00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96)
Subsystem: VIA Technologies, Inc. Device [1106:0106]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
00:0c.0 Serial controller [0700]: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) [1415:9501] (prog-if 06 [16950])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1400 [size=32]
Region 1: Memory at e0040000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1440 [size=32]
Region 3: Memory at e0080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:0c.1 Bridge [0680]: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (Disabled) [1415:9510]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1480 [size=32]
Region 1: Memory at e00c0000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 14c0 [size=32]
Region 3: Memory at e0100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090]
Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 6000 [size=8]
Region 1: I/O ports at 6100 [size=256]
Region 2: I/O ports at 6200 [size=64]
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 9d00 [size=128]
Region 5: I/O ports at 9c00 [size=64]
Kernel driver in use: cs5535-mfd
00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_amd
00:0f.4 USB controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:0f.5 USB controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
** Sound cards:
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i586)
Kernel: Linux 3.2.0-1-486
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-1-486 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.100
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-1-486 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-1-486 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-1-486 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-1-486/postinst/missing-firmware-3.2.0-1-486:
linux-image-3.2.0-1-486/prerm/removing-running-kernel-3.2.0-1-486: true
linux-image-3.2.0-1-486/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-486/postinst/depmod-error-initrd-3.2.0-1-486: false
GNU GRUB version 1.99-14
+--------------------------------------------------------------------------+||||||||||||||||||||||||+--------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the commands
before booting or 'c' for a command-line.
Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) The highlighted entry will be executed automatically in 5s. Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) Loading Linux 2.6.32-5-686 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:04:25 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0010000000 page 2M
[ 0.000000] kernel direct mapping tables up to 10000000 @ 7000-c000
[ 0.000000] RAMDISK: 0f509000 - 0fcf9d49
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 0 - 10000000
[ 0.000000] node 0 low ram: 00000000 - 10000000
[ 0.000000] node 0 bootmap 00002000 - 00004000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0010000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[ 0.000000] #4 [000f509000 - 000fcf9d49] RAMDISK ==> [000f509000 - 000fcf9d49]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [00014cd000 - 00014d3000] BRK ==> [00014cd000 - 00014d3000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem 0x00010000 -> 0x00010000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] On node 0 totalpages: 65440
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d4000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64928
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=8aa1c103-24fd-4367-9659-f572d602f750 ro single console=ttyS0,38400n8 debug
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 245980k/262144k available (2506k kernel code, 15424k reserved, 1326k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff3fe000 ( 747 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272a57 - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272a57 (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.066 MHz processor.
[ 0.012010] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.13 BogoMIPS (lpj=1992264)
[ 0.020063] Security Framework initialized
[ 0.024024] SELinux: Disabled at boot.
[ 0.028034] Mount-cache hash table entries: 512
[ 0.036091] Initializing cgroup subsys ns
[ 0.040017] Initializing cgroup subsys cpuacct
[ 0.044027] Initializing cgroup subsys devices
[ 0.048015] Initializing cgroup subsys freezer
[ 0.052014] Initializing cgroup subsys net_cls
[ 0.056079] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[ 0.060017] CPU: L2 Cache: 128K (32 bytes/line)
[ 0.064034] Performance Events: no PMU driver, software events only.
[ 0.072016] Checking 'hlt' instruction... OK.
[ 0.093447] SMP alternatives: switching to UP code
[ 0.112823] Freeing SMP alternatives: 13k freed
[ 0.116208] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.120015] weird, boot CPU (#0) not listed by the BIOS.
[ 0.124011] SMP motherboard not detected.
[ 0.128013] Local APIC not detected. Using dummy APIC emulation.
[ 0.132011] SMP disabled
[ 0.136391] Brought up 1 CPUs
[ 0.140020] Total of 1 processors activated (996.13 BogoMIPS).
[ 0.144060] CPU0 attaching NULL sched-domain.
[ 0.148408] devtmpfs: initialized
[ 0.156865] regulator: core version 0.5
[ 0.160283] NET: Registered protocol family 16
[ 0.165161] PCI: PCI BIOS revision 2.10 entry at 0xfcc2b, last bus=0
[ 0.168017] PCI: Using configuration type 1 for base access
[ 0.177154] bio: create slab <bio-0> at 0
[ 0.180287] ACPI: Interpreter disabled.
[ 0.184233] vgaarb: loaded
[ 0.188287] PCI: Probing PCI hardware
[ 0.192029] PCI: Probing PCI hardware (bus 00)
[ 0.196174] pci 0000:00:01.0: reg 10 io port: [0xac1c-0xac1f]
[ 0.200188] pci 0000:00:01.2: reg 10 32bit mmio: [0xefff4000-0xefff7fff]
[ 0.204196] pci 0000:00:09.0: reg 10 io port: [0x1000-0x10ff]
[ 0.208025] pci 0000:00:09.0: reg 14 32bit mmio: [0xe0000000-0xe00000ff]
[ 0.212069] pci 0000:00:09.0: supports D1 D2
[ 0.216018] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220019] pci 0000:00:09.0: PME# disabled
[ 0.224121] pci 0000:00:0f.0: reg 10 io port: [0x6000-0x6007]
[ 0.228062] pci 0000:00:0f.0: reg 14 io port: [0x6100-0x61ff]
[ 0.232063] pci 0000:00:0f.0: reg 18 io port: [0x6200-0x623f]
[ 0.236076] pci 0000:00:0f.0: reg 20 io port: [0x9d00-0x9d7f]
[ 0.240061] pci 0000:00:0f.0: reg 24 io port: [0x9c00-0x9c3f]
[ 0.244192] pci 0000:00:0f.2: reg 20 io port: [0xff00-0xff0f]
[ 0.248154] pci 0000:00:0f.3: reg 10 io port: [0xfe00-0xfe7f]
[ 0.252251] pci 0000:00:0f.4: reg 10 32bit mmio: [0xefffe000-0xefffefff]
[ 0.260157] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.264022] pci 0000:00:0f.4: PME# disabled
[ 0.268146] pci 0000:00:0f.5: reg 10 32bit mmio: [0xefffd000-0xefffdfff]
[ 0.272169] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.276021] pci 0000:00:0f.5: PME# disabled
[ 0.284028] Switching to clocksource tsc
[ 0.294496] pnp: PnP ACPI: disabled
[ 0.304985] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.322158] PnPBIOS: PnP BIOS support was not detected.
[ 0.338845] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.355335] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.374038] NET: Registered protocol family 2
[ 0.387646] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.410009] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.431337] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.450863] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.469930] TCP reno registered
[ 0.479704] NET: Registered protocol family 1
[ 0.493163] Unpacking initramfs...
[ 2.179901] Freeing initrd memory: 8131k freed
[ 2.201054] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.224903] audit: initializing netlink socket (disabled)
[ 2.241124] type=2000 audit(1330777853.241:1): initialized
[ 2.288531] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.318067] VFS: Disk quotas dquot_6.5.2
[ 2.330239] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.350229] msgmni has been set to 497
[ 2.362469] alg: No test for stdrng (krng)
[ 2.374897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.397087] io scheduler noop registered
[ 2.408852] io scheduler anticipatory registered
[ 2.422706] io scheduler deadline registered
[ 2.435803] io scheduler cfq registered (default)
[ 2.450571] isapnp: Scanning for PnP cards...
[ 2.476120] Clocksource tsc unstable (delta = 167988998 ns)
[ 2.529776] Switching to clocksource pit
[ 2.848094] isapnp: No Plug & Play device found
[ 2.858353] Linux agpgart interface v0.103
[ 2.863346] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.866654] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.870148] PNP: No PS/2 controller found. Probing ports directly.
[ 2.876948] i8042.c: No controller found.
[ 2.881239] mice: PS/2 mouse device common for all mice
[ 2.885267] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.888932] rtc0: alarms up to one day, 114 bytes nvram
[ 2.896164] cpuidle: using governor ladder
[ 2.900467] cpuidle: using governor menu
[ 2.904453] No iBFT detected.
[ 2.911847] TCP cubic registered
[ 2.914568] NET: Registered protocol family 10
[ 2.925444] Mobile IPv6
[ 2.928833] NET: Registered protocol family 17
[ 2.934244] Using IPI No-Shortcut mode
[ 2.938182] PM: Resume from disk failed.
[ 2.941732] registered taskstats version 1
[ 2.946748] rtc_cmos rtc_cmos: setting system clock to 2012-03-03 12:30:56 UTC (1330777856)
[ 2.952069] Initalizing network drop monitor service
[ 2.955791] Freeing unused kernel memory: 380k freed
[ 2.958972] Write protecting the kernel text: 2508k
[ 2.962000] Write protecting the kernel read-only data: 920k
Loading, please wait...
[ 3.002535] <30>udevd[47]: starting version 175
[ 3.584947] usbcore: registered new interface driver usbfs
[ 3.590318] usbcore: registered new interface driver hub
[ 3.595248] usbcore: registered new device driver usb
[ 3.630038] SCSI subsystem initialized
[ 3.657827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.661578] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 3.667102] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 3.671079] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.682898] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 3.868229] ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
[ 3.874963] libata version 3.00 loaded.
[ 3.901043] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.906411] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.910801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.914781] usb usb1: Product: EHCI Host Controller
[ 3.919137] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 3.923122] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.928635] usb usb1: configuration #1 chosen from 1 choice
[ 3.933769] hub 1-0:1.0: USB hub found
[ 3.937379] hub 1-0:1.0: 4 ports detected
[ 3.941405] via-rhine 0000:00:09.0: setting latency timer to 64
[ 3.972859] eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:00:13:00:00, IRQ 10.
[ 3.978647] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1.
[ 3.992335] pata_amd 0000:00:0f.2: version 0.4.1
[ 4.000295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.012046] scsi0 : pata_amd
[ 4.013612] scsi1 : pata_amd
[ 4.018863] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 4.023773] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 4.027746] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 4.030427] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 4.035624] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.038098] ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
[ 4.128280] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.132666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.138340] usb usb2: Product: OHCI Host Controller
[ 4.142325] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 4.146783] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.150769] usb usb2: configuration #1 chosen from 1 choice
[ 4.154453] hub 2-0:1.0: USB hub found
[ 4.158075] hub 2-0:1.0: 4 ports detected
[ 4.196628] ata1.00: CFA: TS8GCF133, 20101110, max UDMA/66
[ 4.201120] ata1.00: 15662304 sectors, multi 0: LBA
[ 4.224593] ata1.00: configured for UDMA/66
[ 4.229612] scsi 0:0:0:0: Direct-Access ATA TS8GCF133 2010 PQ: 0 ANSI: 5
[ 4.235323] ata2: port disabled. ignoring.
[ 4.342412] sd 0:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4.346430] sd 0:0:0:0: [sda] Write Protect is off
[ 4.349138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.356166] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.360682] sda: sda1 sda2
[ 4.373426] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.954363] EXT4-fs (sda1): mounted filesystem with ordered data mode
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 5.703279] <30>udevd[191]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 6.091930] cs5535_gpio: base=0x6100 mask=0xb003c66 major=252
[ 6.176991] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 6.208064] AMD Geode RNG detected
[ 6.267461] <30>udevd[208]: renamed network interface eth0 to eth3
[ 6.721512] padlock: VIA PadLock not detected.
[ 6.793388] geode-aes: GEODE AES engine enabled.
[ 7.010304] cs5535audio 0000:00:0f.3: setting latency timer to 64
[ 7.012794] Failure writing to cs5535 codec
[ 7.017502] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.023666] Failure writing to cs5535 codec
[ 7.028410] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.034549] Failure writing to cs5535 codec
[ 7.039289] Failure writing to cs5535 codec
[ 7.043975] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.047845] Failure writing to cs5535 codec
[ 7.050548] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.054418] Failure writing to cs5535 codec
[ 7.057378] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.064285] Failure writing to cs5535 codec
[ 7.067394] Failure writing to cs5535 codec
[ 7.069705] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.076534] Failure writing to cs5535 codec
[ 7.081239] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.087124] Failure writing to cs5535 codec
[ 7.091809] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.095680] Failure writing to cs5535 codec
[ 7.098640] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.102510] Failure writing to cs5535 codec
[ 7.105472] Failure writing to cs5535 codec
[ 7.110158] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.116524] Failure writing to cs5535 codec
[ 7.121224] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.127109] Failure writing to cs5535 codec
[ 7.131798] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.135668] Failure writing to cs5535 codec
[ 7.138629] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.142499] Failure writing to cs5535 codec
[ 7.145460] Failure writing to cs5535 codec
[ 7.150147] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.156587] Failure writing to cs5535 codec
[ 7.161267] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.167150] Failure writing to cs5535 codec
[ 7.171838] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.175708] Failure writing to cs5535 codec
[ 7.178668] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.182538] Failure writing to cs5535 codec
[ 7.185498] Failure writing to cs5535 codec
[ 7.190188] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.196526] Failure writing to cs5535 codec
[ 7.201229] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.207111] Failure writing to cs5535 codec
[ 7.211800] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.215670] Failure writing to cs5535 codec
[ 7.218630] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.222500] Failure writing to cs5535 codec
[ 7.225462] Failure writing to cs5535 codec
[ 7.230150] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.236528] Failure writing to cs5535 codec
[ 7.241217] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.247102] Failure writing to cs5535 codec
[ 7.251788] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.255658] Failure writing to cs5535 codec
[ 7.258619] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.262489] Failure writing to cs5535 codec
[ 7.265449] Failure writing to cs5535 codec
[ 7.270137] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.276530] Failure writing to cs5535 codec
[ 7.281231] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.287113] Failure writing to cs5535 codec
[ 7.291802] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.295672] Failure writing to cs5535 codec
[ 7.298633] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.302503] Failure writing to cs5535 codec
[ 7.305465] Failure writing to cs5535 codec
[ 7.310154] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.316532] Failure writing to cs5535 codec
[ 7.321220] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.327104] Failure writing to cs5535 codec
[ 7.331791] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.335661] Failure writing to cs5535 codec
[ 7.338621] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.342491] Failure writing to cs5535 codec
[ 7.345452] Failure writing to cs5535 codec
[ 7.350141] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.356536] Failure writing to cs5535 codec
[ 7.361231] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.367118] Failure writing to cs5535 codec
[ 7.371805] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.375675] Failure writing to cs5535 codec
[ 7.378635] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.382505] Failure writing to cs5535 codec
[ 7.385466] Failure writing to cs5535 codec
[ 7.390154] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.396537] Failure writing to cs5535 codec
[ 7.401221] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.407106] Failure writing to cs5535 codec
[ 7.411793] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.415663] Failure writing to cs5535 codec
[ 7.418624] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.422494] Failure writing to cs5535 codec
[ 7.425454] Failure writing to cs5535 codec
[ 7.430141] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.436539] Failure writing to cs5535 codec
[ 7.441235] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.447122] Failure writing to cs5535 codec
[ 7.451805] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.455675] Failure writing to cs5535 codec
[ 7.458638] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.462508] Failure writing to cs5535 codec
[ 7.465468] Failure writing to cs5535 codec
[ 7.470159] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.476543] Failure writing to cs5535 codec
[ 7.481224] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.487108] Failure writing to cs5535 codec
[ 7.491794] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.495664] Failure writing to cs5535 codec
[ 7.498627] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.502497] Failure writing to cs5535 codec
[ 7.505457] Failure writing to cs5535 codec
[ 7.510146] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.516543] Failure writing to cs5535 codec
[ 7.521237] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.527122] Failure writing to cs5535 codec
[ 7.531808] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.535678] Failure writing to cs5535 codec
[ 7.538640] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.542510] Failure writing to cs5535 codec
[ 7.545470] Failure writing to cs5535 codec
[ 7.550161] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.556547] Failure writing to cs5535 codec
[ 7.561253] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.567138] Failure writing to cs5535 codec
[ 7.571823] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.575693] Failure writing to cs5535 codec
[ 7.578655] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.582525] Failure writing to cs5535 codec
[ 7.585487] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.591631] Failure writing to cs5535 codec
[ 7.596318] Failure writing to cs5535 codec
[ 7.600190] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.604548] Failure writing to cs5535 codec
[ 7.609242] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.615125] Failure writing to cs5535 codec
[ 7.619814] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.623684] Failure writing to cs5535 codec
[ 7.626644] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.630515] Failure writing to cs5535 codec
[ 7.633476] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.639622] Failure writing to cs5535 codec
[ 7.644306] Failure writing to cs5535 codec
[ 7.648178] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.652552] Failure writing to cs5535 codec
[ 7.657231] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.663125] Failure writing to cs5535 codec
[ 7.667803] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.671673] Failure writing to cs5535 codec
[ 7.674636] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.678506] Failure writing to cs5535 codec
[ 7.681467] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.695341] Failure writing to cs5535 codec
[ 7.700105] Failure writing to cs5535 codec
[ 7.703934] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.708578] Failure writing to cs5535 codec
[ 7.713289] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.719192] Failure writing to cs5535 codec
[ 7.723877] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.727748] Failure writing to cs5535 codec
[ 7.730712] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.734579] Failure writing to cs5535 codec
[ 7.737541] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.743688] Failure writing to cs5535 codec
[ 7.748412] Failure writing to cs5535 codec
[ 7.753114] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.760566] Failure writing to cs5535 codec
[ 7.765246] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.771128] Failure writing to cs5535 codec
[ 7.775819] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.779688] Failure writing to cs5535 codec
[ 7.782650] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.786519] Failure writing to cs5535 codec
[ 7.789482] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.795625] Failure writing to cs5535 codec
[ 7.800312] Failure writing to cs5535 codec
[ 7.804182] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.808562] Failure writing to cs5535 codec
[ 7.813261] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.819146] Failure writing to cs5535 codec
[ 7.823833] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.827702] Failure writing to cs5535 codec
[ 7.830664] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.834535] Failure writing to cs5535 codec
[ 7.837497] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.843640] Failure writing to cs5535 codec
[ 7.848326] Failure writing to cs5535 codec
[ 7.852197] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.856564] Failure writing to cs5535 codec
[ 7.861251] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.867134] Failure writing to cs5535 codec
[ 7.871823] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.875693] Failure writing to cs5535 codec
[ 7.878653] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.882524] Failure writing to cs5535 codec
[ 7.885488] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.891631] Failure writing to cs5535 codec
[ 7.896316] Failure writing to cs5535 codec
[ 7.900188] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.904566] Failure writing to cs5535 codec
[ 7.909265] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.915150] Failure writing to cs5535 codec
[ 7.919839] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.923708] Failure writing to cs5535 codec
[ 7.926670] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.930540] Failure writing to cs5535 codec
[ 7.933502] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.939645] Failure writing to cs5535 codec
[ 7.944331] Failure writing to cs5535 codec
[ 7.948203] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 7.952570] Failure writing to cs5535 codec
[ 7.957256] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 7.963140] Failure writing to cs5535 codec
[ 7.967830] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 7.971699] Failure writing to cs5535 codec
[ 7.974661] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 7.978531] Failure writing to cs5535 codec
[ 7.981492] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 7.987636] Failure writing to cs5535 codec
[ 7.992322] Failure writing to cs5535 codec
[ 7.996194] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 8.000571] Failure writing to cs5535 codec
[ 8.005272] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 8.011157] Failure writing to cs5535 codec
[ 8.015846] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 8.019715] Failure writing to cs5535 codec
[ 8.022676] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 8.026546] Failure writing to cs5535 codec
[ 8.029509] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 8.035651] Failure writing to cs5535 codec
[ 8.040338] Failure writing to cs5535 codec
[ 8.044210] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 8.048574] Failure writing to cs5535 codec
[ 8.053262] Failure reading codec reg 0x0,Last value=0xff80ffff
[ 8.059146] Failure writing to cs5535 codec
[ 8.063836] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 8.067705] Failure writing to cs5535 codec
[ 8.070692] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 8.074562] Failure writing to cs5535 codec
[ 8.077525] Failure reading codec reg 0x3c,Last value=0xff80ffff
[ 8.084461] Failure writing to cs5535 codec
[ 8.089162] Failure writing to cs5535 codec
[ 8.093850] Failure reading codec reg 0x1c,Last value=0xff80ffff
[ 8.100468] AC'97 0 does not respond - RESET
[ 8.105409] Failure writing to cs5535 codec
[ 8.110096] Failure reading codec reg 0x7c,Last value=0xff80ffff
[ 8.116240] Failure writing to cs5535 codec
[ 8.120111] Failure reading codec reg 0x7e,Last value=0xff80ffff
[ 8.122956] AC'97 0 access is not valid [0xffffffff], removing mixer.
[ 8.126943] mixer failed
[ 8.130282] cs5535audio: probe of 0000:00:0f.3 failed with error -5
done.
Activating swap...done.
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux 2.20.1
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Cleaning up ifupdown....
Setting up networking....
Configuring network interfaces...done.
Cleaning up temporary files....
Setting up ALSA...warning: 'alsactl restore' failed with error message 'alsactl: load_state:1686: No soundcards found...'...done.
Setting kernel variables ...done.
Give root password for maintenance
(or type Control-D to continue):
GNU GRUB version 1.99-14
+--------------------------------------------------------------------------+||||||||||||||||||||||||+--------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the commands
before booting or 'c' for a command-line.
Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) The highlighted entry will be executed automatically in 5s. Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Loading Linux 3.2.0-1-486 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1-486 (Debian 3.2.6-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 Fri Feb 17 05:23:41 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0010000000 page 2M
[ 0.000000] kernel direct mapping tables up to 10000000 @ 17fc000-1800000
[ 0.000000] RAMDISK: 0f3ed000 - 0fcf3000
[ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 0 - 10000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] On node 0 totalpages: 65424
[ 0.000000] free_area_init_node: node 0, pgdat c13bf2f8, node_mem_map cfdff200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64912
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-486 root=UUID=8aa1c103-24fd-4367-9659-f572d602f750 ro single console=ttyS0,38400n8 debug
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 245316k/262144k available (2560k kernel code, 16380k reserved, 1306k data, 444k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] .init : 0xc13c7000 - 0xc1436000 ( 444 kB)
[ 0.000000] .data : 0xc128032c - 0xc13c6b40 (1306 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128032c (2560 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cec06000 soft=cec08000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.020 MHz processor.
[ 0.012007] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.04 BogoMIPS (lpj=1992080)
[ 0.020014] pid_max: default: 32768 minimum: 301
[ 0.024225] Security Framework initialized
[ 0.028025] AppArmor: AppArmor disabled by boot time parameter
[ 0.032078] Mount-cache hash table entries: 512
[ 0.036406] Initializing cgroup subsys cpuacct
[ 0.040024] Initializing cgroup subsys memory
[ 0.044039] Initializing cgroup subsys devices
[ 0.048017] Initializing cgroup subsys freezer
[ 0.052016] Initializing cgroup subsys net_cls
[ 0.056016] Initializing cgroup subsys blkio
[ 0.060153] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
[ 0.073478] Performance Events: no PMU driver, software events only.
[ 0.080384] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.084557] devtmpfs: initialized
[ 0.089497] print_constraints: dummy:
[ 0.092275] NET: Registered protocol family 16
[ 0.096588] EISA bus registered
[ 0.100904] PCI: PCI BIOS revision 2.10 entry at 0xfcc2b, last bus=0
[ 0.104019] PCI: Using configuration type 1 for base access
[ 0.113624] bio: create slab <bio-0> at 0
[ 0.116355] ACPI: Interpreter disabled.
[ 0.120328] vgaarb: loaded
[ 0.124287] PCI: Probing PCI hardware
[ 0.128022] PCI: Probing PCI hardware (bus 00)
[ 0.132255] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600
[ 0.136050] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f]
[ 0.140182] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010
[ 0.144062] pci 0000:00:01.2: reg 10: [mem 0xefff4000-0xefff7fff]
[ 0.148245] pci 0000:00:09.0: [1106:3053] type 0 class 0x000200
[ 0.152046] pci 0000:00:09.0: reg 10: [io 0x1000-0x10ff]
[ 0.156035] pci 0000:00:09.0: reg 14: [mem 0xe0000000-0xe00000ff]
[ 0.160108] pci 0000:00:09.0: supports D1 D2
[ 0.164027] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168028] pci 0000:00:09.0: PME# disabled
[ 0.172081] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601
[ 0.176120] pci 0000:00:0f.0: reg 10: [io 0x6000-0x6007]
[ 0.180109] pci 0000:00:0f.0: reg 14: [io 0x6100-0x61ff]
[ 0.184111] pci 0000:00:0f.0: reg 18: [io 0x6200-0x623f]
[ 0.188163] pci 0000:00:0f.0: reg 20: [io 0x9d00-0x9d7f]
[ 0.192110] pci 0000:00:0f.0: reg 24: [io 0x9c00-0x9c3f]
[ 0.196154] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101
[ 0.204093] pci 0000:00:0f.2: reg 20: [io 0xff00-0xff0f]
[ 0.208183] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401
[ 0.212089] pci 0000:00:0f.3: reg 10: [io 0xfe00-0xfe7f]
[ 0.216325] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03
[ 0.220098] pci 0000:00:0f.4: reg 10: [mem 0xefffe000-0xefffefff]
[ 0.224317] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.228034] pci 0000:00:0f.4: PME# disabled
[ 0.232101] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03
[ 0.236101] pci 0000:00:0f.5: reg 10: [mem 0xefffd000-0xefffdfff]
[ 0.240326] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.244036] pci 0000:00:0f.5: PME# disabled
[ 0.250010] PCI: pci_cache_line_size set to 32 bytes
[ 0.252662] Switching to clocksource pit
[ 0.264033] pnp: PnP ACPI: disabled
[ 0.266540] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.271742] PnPBIOS: PnP BIOS support was not detected.
[ 0.288327] PCI: max bus depth: 0 pci_try_num: 1
[ 0.290227] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.294970] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.297988] NET: Registered protocol family 2
[ 0.303373] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.309177] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.310534] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.313993] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.321058] TCP reno registered
[ 0.322502] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.328035] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.331112] NET: Registered protocol family 1
[ 0.336404] PCI: CLS 32 bytes, default 32
[ 0.340723] Unpacking initramfs...
[ 2.387570] Freeing initrd memory: 9240k freed
[ 2.403364] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.407592] audit: initializing netlink socket (disabled)
[ 2.411844] type=2000 audit(1330777889.408:1): initialized
[ 2.565492] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.569109] VFS: Disk quotas dquot_6.5.2
[ 2.573041] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.576875] msgmni hn set to 497
[ 2.580901] alg: No test for stdrng (krng)
[ 2.585325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.587520] io scheduler noop registered
[ 2.591316] io scheduler deadline registered
[ 2.596248] io scheduler cfq registered (default)
[ 2.599606] isapnp: Scanning for PnP cards...
[ 2.960286] isapnp: No Plug & Play device found
[ 2.962161] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.973508] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.977453] Linux agpgart interface v0.103
[ 2.978997] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.984250] i8042: No controller found
[ 2.987897] mousedev: PS/2 mouse device common for all mice
[ 2.993117] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.996244] rtc0: alarms up to one day, 114 bytes nvram
[ 3.000237] EISA: Probing bus 0 at eisa.0
[ 3.004290] Cannot allocate resource for EISA slot 1
[ 3.007246] Cannot allocate resource for EISA slot 6
[ 3.010168] EISA: Detected 0 cards.
[ 3.016648] cpuidle: using governor ladder
[ 3.020968] cpuidle: using governor menu
[ 3.026430] TCP cubic registered
[ 3.032267] NET: Registered protocol family 10
[ 3.041330] Mobile IPv6
[ 3.044705] NET: Registered protocol family 17
[ 3.046072] Registering the dns_resolver key type
[ 3.052274] Using IPI Shortcut mode
[ 3.055344] PM: Hibernation image not present or could not be loaded.
[ 3.058709] registered taskstats version 1
[ 3.063594] rtc_cmos rtc_cmos: setting system clock to 2012-03-03 12:31:32 UTC (1330777892)
[ 3.068855] Initializing network drop monitor service
[ 3.072566] Freeing unused kernel memory: 444k freed
[ 3.076347] Write protecting the kernel text: 2564k
[ 3.079185] Write protecting the kernel read-only data: 1044k
Loading, please wait...
[ 3.126244] udevd[42]: starting version 175
[ 3.264725] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 3.336118] via-rhine 0000:00:09.0: setting latency timer to 64
[ 3.401296] via-rhine 0000:00:09.0: eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:00:13:00:00, IRQ 10
[ 3.405081] via-rhine 0000:00:09.0: eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1
[ 3.407118] Switching to clocksource tsc
[ 3.464171] SCSI subsystem initialized
[ 3.477234] usbcore: registered new interface driver usbfs
[ 3.585148] usbcore: registered new interface driver hub
[ 3.602746] usbcore: registered new device driver usb
[ 3.621373] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.645438] libata version 3.00 loaded.
[ 3.659844] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 3.677356] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 3.695684] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.741762] ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
[ 3.769726] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.787076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.807446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.829093] usb usb1: Product: EHCI Host Controller
[ 3.843731] usb usb1: Manufacturer: Linux 3.2.0-1-486 ehci_hcd
[ 3.861227] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.876364] hub 1-0:1.0: USB hub found
[ 3.887649] hub 1-0:1.0: 4 ports detected
[ 3.900048] pata_amd 0000:00:0f.2: version 0.4.1
[ 3.918420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.940346] scsi0 : pata_amd
[ 3.949880] scsi1 : pata_amd
[ 3.959160] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.980061] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 4.005664] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 4.023207] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 4.048711] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.070965] ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
[ 4.173719] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.194076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.215727] usb usb2: Product: OHCI Host Controller
[ 4.230366] usb usb2: Manufacturer: Linux 3.2.0-1-486 ohci_hcd
[ 4.247863] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.262907] hub 2-0:1.0: USB hub found
[ 4.274211] hub 2-0:1.0: 4 ports detected
[ 4.318850] ata1.00: CFA: TS8GCF133, 20101110, max UDMA/66
[ 4.335311] ata1.00: 15662304 sectors, multi 0: LBA
[ 4.366027] ata1.00: configured for UDMA/66
[ 4.379028] scsi 0:0:0:0: Direct-Access ATA TS8GCF133 2010 PQ: 0 ANSI: 5
[ 4.404895] ata2: port disabled--ignoring
[ 4.464197] sd 0:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4.488159] sd 0:0:0:0: [sda] Write Protect is off
[ 4.502572] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.517873] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.548615] sda: sda1 sda2
[ 4.559157] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.945582] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 4.966212] EXT4-fs (sda1): write access will be enabled during recovery
[ 5.009881] Clocksource tsc unstable (delta = 148048492 ns)
[ 5.026835] Switching to clocksource pit
[ 5.081190] EXT4-fs (sda1): recovery complete
[ 5.090062] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 5.853392] udevd[176]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 6.187205] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff]
[ 6.193677] cs5535-gpio cs5535-gpio: GPIO support successfully loaded.
[ 6.197493] AMD Geode RNG detected
[ 6.280090] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 6.349733] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 6.415839] udevd[196]: renamed network interface eth0 to eth3
[ 6.495052] Intel AES-NI instructions are not detected.
[ 6.862167] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0x623f]
GNU GRUB version 1.99-14
+--------------------------------------------------------------------------+||||||||||||||||||||||||+--------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the commands
before booting or 'c' for a command-line.
Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) The highlighted entry will be executed automatically in 5s. The highlighted entry will be executed automatically in 4s. Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) Loading Linux 2.6.32-5-686 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:04:25 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0010000000 page 2M
[ 0.000000] kernel direct mapping tables up to 10000000 @ 7000-c000
[ 0.000000] RAMDISK: 0f511000 - 0fd01d49
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 0 - 10000000
[ 0.000000] node 0 low ram: 00000000 - 10000000
[ 0.000000] node 0 bootmap 00002000 - 00004000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0010000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[ 0.000000] #4 [000f511000 - 000fd01d49] RAMDISK ==> [000f511000 - 000fd01d49]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [00014cd000 - 00014d3000] BRK ==> [00014cd000 - 00014d3000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem 0x00010000 -> 0x00010000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] On node 0 totalpages: 65440
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d4000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64928
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=8aa1c103-24fd-4367-9659-f572d602f750 ro single console=ttyS0,38400n8 debug
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 246032k/262144k available (2506k kernel code, 15424k reserved, 1326k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff3fe000 ( 747 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272a57 - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272a57 (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.063 MHz processor.
[ 0.012010] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.12 BogoMIPS (lpj=1992252)
[ 0.020063] Security Framework initialized
[ 0.024024] SELinux: Disabled at boot.
[ 0.028035] Mount-cache hash table entries: 512
[ 0.036088] Initializing cgroup subsys ns
[ 0.040017] Initializing cgroup subsys cpuacct
[ 0.044028] Initializing cgroup subsys devices
[ 0.048015] Initializing cgroup subsys freezer
[ 0.052014] Initializing cgroup subsys net_cls
[ 0.056080] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[ 0.060017] CPU: L2 Cache: 128K (32 bytes/line)
[ 0.064034] Performance Events: no PMU driver, software events only.
[ 0.072016] Checking 'hlt' instruction... OK.
[ 0.093444] SMP alternatives: switching to UP code
[ 0.112829] Freeing SMP alternatives: 13k freed
[ 0.116206] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.120016] weird, boot CPU (#0) not listed by the BIOS.
[ 0.124012] SMP motherboard not detected.
[ 0.128013] Local APIC not detected. Using dummy APIC emulation.
[ 0.132010] SMP disabled
[ 0.136386] Brought up 1 CPUs
[ 0.140020] Total of 1 processors activated (996.12 BogoMIPS).
[ 0.144059] CPU0 attaching NULL sched-domain.
[ 0.148409] devtmpfs: initialized
[ 0.156861] regulator: core version 0.5
[ 0.160283] NET: Registered protocol family 16
[ 0.165168] PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0
[ 0.168017] PCI: Using configuration type 1 for base access
[ 0.177124] bio: create slab <bio-0> at 0
[ 0.180284] ACPI: Interpreter disabled.
[ 0.184232] vgaarb: loaded
[ 0.188286] PCI: Probing PCI hardware
[ 0.192030] PCI: Probing PCI hardware (bus 00)
[ 0.196173] pci 0000:00:01.0: reg 10 io port: [0xac1c-0xac1f]
[ 0.200184] pci 0000:00:01.2: reg 10 32bit mmio: [0xefff4000-0xefff7fff]
[ 0.204196] pci 0000:00:09.0: reg 10 io port: [0x1000-0x10ff]
[ 0.208025] pci 0000:00:09.0: reg 14 32bit mmio: [0xe0000000-0xe00000ff]
[ 0.212069] pci 0000:00:09.0: supports D1 D2
[ 0.216017] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220019] pci 0000:00:09.0: PME# disabled
[ 0.224119] pci 0000:00:0f.0: reg 10 io port: [0x6000-0x6007]
[ 0.228062] pci 0000:00:0f.0: reg 14 io port: [0x6100-0x61ff]
[ 0.232063] pci 0000:00:0f.0: reg 18 io port: [0x6200-0x623f]
[ 0.236076] pci 0000:00:0f.0: reg 20 io port: [0x9d00-0x9d7f]
[ 0.240061] pci 0000:00:0f.0: reg 24 io port: [0x9c00-0x9c3f]
[ 0.244192] pci 0000:00:0f.2: reg 20 io port: [0xff00-0xff0f]
[ 0.248187] pci 0000:00:0f.4: reg 10 32bit mmio: [0xefffe000-0xefffefff]
[ 0.252160] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.256022] pci 0000:00:0f.4: PME# disabled
[ 0.260149] pci 0000:00:0f.5: reg 10 32bit mmio: [0xefffd000-0xefffdfff]
[ 0.264166] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.268021] pci 0000:00:0f.5: PME# disabled
[ 0.273653] Switching to clocksource tsc
[ 0.282497] pnp: PnP ACPI: disabled
[ 0.292976] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.310152] PnPBIOS: PnP BIOS support was not detected.
[ 0.326834] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.343328] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.362036] NET: Registered protocol family 2
[ 0.375664] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.398056] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.419383] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.438913] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.457973] TCP reno registered
[ 0.467752] NET: Registered protocol family 1
[ 0.481204] Unpacking initramfs...
[ 2.168169] Freeing initrd memory: 8131k freed
[ 2.189326] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.213135] audit: initializing netlink socket (disabled)
[ 2.229366] type=2000 audit(1330780517.229:1): initialized
[ 2.276716] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.306227] VFS: Disk quotas dquot_6.5.2
[ 2.318400] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.338385] msgmni has been set to 497
[ 2.350642] alg: No test for stdrng (krng)
[ 2.363055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.385248] io scheduler noop registered
[ 2.397013] io scheduler anticipatory registered
[ 2.410869] io scheduler deadline registered
[ 2.423959] io scheduler cfq registered (default)
[ 2.438717] isapnp: Scanning for PnP cards...
[ 2.477727] Clocksource tsc unstable (delta = 171993015 ns)
[ 2.517890] Switching to clocksource pit
[ 2.836099] isapnp: No Plug & Play device found
[ 2.850400] Linux agpgart interface v0.103
[ 2.855379] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.858711] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 2.865162] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 2.868940] PNP: No PS/2 controller found. Probing ports directly.
[ 2.872088] i8042.c: No controller found.
[ 2.876383] mice: PS/2 mouse device common for all mice
[ 2.880395] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.884062] rtc0: alarms up to one day, 114 bytes nvram
[ 2.887459] cpuidle: using governor ladder
[ 2.891570] cpuidle: using governor menu
[ 2.895556] No iBFT detected.
[ 2.902992] TCP cubic registered
[ 2.909772] NET: Registered protocol family 10
[ 2.920586] Mobile IPv6
[ 2.923968] NET: Registered protocol family 17
[ 2.929373] Using IPI No-Shortcut mode
[ 2.933310] PM: Resume from disk failed.
[ 2.936863] registered taskstats version 1
[ 2.941877] rtc_cmos rtc_cmos: setting system clock to 2012-03-03 13:15:20 UTC (1330780520)
[ 2.947209] Initalizing network drop monitor service
[ 2.950921] Freeing unused kernel memory: 380k freed
[ 2.958051] Write protecting the kernel text: 2508k
[ 2.964875] Write protecting the kernel read-only data: 920k
Loading, please wait...
[ 3.001914] <30>udevd[47]: starting version 175
[ 3.579532] usbcore: registered new interface driver usbfs
[ 3.584940] usbcore: registered new interface driver hub
[ 3.589936] usbcore: registered new device driver usb
[ 3.629108] SCSI subsystem initialized
[ 3.656889] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.660656] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 3.664500] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 3.666174] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.681986] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 3.866900] ehci_hcd 0000:00:0f.5: irq 12, io mem 0xefffd000
[ 3.873623] libata version 3.00 loaded.
[ 3.899591] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.904968] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.909353] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.913333] usb usb1: Product: EHCI Host Controller
[ 3.917689] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 3.921674] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.927179] usb usb1: configuration #1 chosen from 1 choice
[ 3.932313] hub 1-0:1.0: USB hub found
[ 3.935910] hub 1-0:1.0: 4 ports detected
[ 3.939952] via-rhine 0000:00:09.0: setting latency timer to 64
[ 3.971390] eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:00:13:00:00, IRQ 10.
[ 3.977199] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 3.993478] pata_amd 0000:00:0f.2: version 0.4.1
[ 3.997714] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.002494] scsi0 : pata_amd
[ 4.008114] scsi1 : pata_amd
[ 4.013311] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 4.016773] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 4.019358] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 4.024895] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 4.030067] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.036330] ohci_hcd 0000:00:0f.4: irq 12, io mem 0xefffe000
[ 4.125884] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.130277] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.135953] usb usb2: Product: OHCI Host Controller
[ 4.139938] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 4.144401] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.148386] usb usb2: configuration #1 chosen from 1 choice
[ 4.152084] hub 2-0:1.0: USB hub found
[ 4.155693] hub 2-0:1.0: 4 ports detected
[ 4.194238] ata1.00: CFA: TS8GCF133, 20101110, max UDMA/66
[ 4.198737] ata1.00: 15662304 sectors, multi 0: LBA
[ 4.222203] ata1.00: configured for UDMA/66
[ 4.227227] scsi 0:0:0:0: Direct-Access ATA TS8GCF133 2010 PQ: 0 ANSI: 5
[ 4.232938] ata2: port disabled. ignoring.
[ 4.340017] sd 0:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4.344045] sd 0:0:0:0: [sda] Write Protect is off
[ 4.346727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.353786] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.358306] sda: sda1 sda2
[ 4.371103] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 5.000966] EXT4-fs (sda1): mounted filesystem with ordered data mode
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 5.744913] <30>udevd[189]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 6.116769] cs5535_gpio: base=0x6100 mask=0xb003c66 major=252
[ 6.150978] AMD Geode RNG detected
[ 6.202464] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 6.518232] padlock: VIA PadLock not detected.
[ 6.600370] geode-aes: GEODE AES engine enabled.
done.
Activating swap...done.
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux 2.20.1
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Cleaning up ifupdown....
Setting up networking....
Configuring network interfaces...done.
Cleaning up temporary files....
Setting up ALSA...done (none loaded).
Setting kernel variables ...done.
[ 8.800205] eth0: link down
[ 8.804857] ADDRCONF(NETDEV_UP): eth0: link is not ready
Give root password for maintenance
(or type Control-D to continue):
GNU GRUB version 1.99-14
+--------------------------------------------------------------------------+||||||||||||||||||||||||+--------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the commands
before booting or 'c' for a command-line.
Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Debian GNU/Linux, with Linux 2.6.32-5-686 Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode) The highlighted entry will be executed automatically in 5s. Debian GNU/Linux, with Linux 3.2.0-1-486 Debian GNU/Linux, with Linux 3.2.0-1-486 (recovery mode) Loading Linux 3.2.0-1-486 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1-486 (Debian 3.2.6-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-14) ) #1 Fri Feb 17 05:23:41 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0010000000 page 2M
[ 0.000000] kernel direct mapping tables up to 10000000 @ 17fc000-1800000
[ 0.000000] RAMDISK: 0f3ed000 - 0fcf3000
[ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 0 - 10000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] On node 0 totalpages: 65424
[ 0.000000] free_area_init_node: node 0, pgdat c13bf2f8, node_mem_map cfdff200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64912
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-486 root=UUID=8aa1c103-24fd-4367-9659-f572d602f750 ro single console=ttyS0,38400n8 debug
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 245316k/262144k available (2560k kernel code, 16380k reserved, 1306k data, 444k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] .init : 0xc13c7000 - 0xc1436000 ( 444 kB)
[ 0.000000] .data : 0xc128032c - 0xc13c6b40 (1306 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128032c (2560 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cec06000 soft=cec08000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.051 MHz processor.
[ 0.012008] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.10 BogoMIPS (lpj=1992204)
[ 0.020014] pid_max: default: 32768 minimum: 301
[ 0.024225] Security Framework initialized
[ 0.028025] AppArmor: AppArmor disabled by boot time parameter
[ 0.032080] Mount-cache hash table entries: 512
[ 0.036406] Initializing cgroup subsys cpuacct
[ 0.040023] Initializing cgroup subsys memory
[ 0.044039] Initializing cgroup subsys devices
[ 0.048017] Initializing cgroup subsys freezer
[ 0.052016] Initializing cgroup subsys net_cls
[ 0.056016] Initializing cgroup subsys blkio
[ 0.060152] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
[ 0.073478] Performance Events: no PMU driver, software events only.
[ 0.080383] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.084559] devtmpfs: initialized
[ 0.089493] print_constraints: dummy:
[ 0.092274] NET: Registered protocol family 16
[ 0.096588] EISA bus registered
[ 0.100919] PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0
[ 0.104019] PCI: Using configuration type 1 for base access
[ 0.113641] bio: create slab <bio-0> at 0
[ 0.116356] ACPI: Interpreter disabled.
[ 0.120328] vgaarb: loaded
[ 0.124288] PCI: Probing PCI hardware
[ 0.128021] PCI: Probing PCI hardware (bus 00)
[ 0.132251] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600
[ 0.136049] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f]
[ 0.140185] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010
[ 0.144064] pci 0000:00:01.2: reg 10: [mem 0xefff4000-0xefff7fff]
[ 0.148244] pci 0000:00:09.0: [1106:3053] type 0 class 0x000200
[ 0.152045] pci 0000:00:09.0: reg 10: [io 0x1000-0x10ff]
[ 0.156035] pci 0000:00:09.0: reg 14: [mem 0xe0000000-0xe00000ff]
[ 0.160107] pci 0000:00:09.0: supports D1 D2
[ 0.164027] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168028] pci 0000:00:09.0: PME# disabled
[ 0.172080] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601
[ 0.176120] pci 0000:00:0f.0: reg 10: [io 0x6000-0x6007]
[ 0.180109] pci 0000:00:0f.0: reg 14: [io 0x6100-0x61ff]
[ 0.184111] pci 0000:00:0f.0: reg 18: [io 0x6200-0x623f]
[ 0.188163] pci 0000:00:0f.0: reg 20: [io 0x9d00-0x9d7f]
[ 0.192110] pci 0000:00:0f.0: reg 24: [io 0x9c00-0x9c3f]
[ 0.196153] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101
[ 0.204140] pci 0000:00:0f.2: reg 20: [io 0xff00-0xff0f]
[ 0.208197] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03
[ 0.212096] pci 0000:00:0f.4: reg 10: [mem 0xefffe000-0xefffefff]
[ 0.216309] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.220034] pci 0000:00:0f.4: PME# disabled
[ 0.224095] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03
[ 0.228100] pci 0000:00:0f.5: reg 10: [mem 0xefffd000-0xefffdfff]
[ 0.236195] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.240034] pci 0000:00:0f.5: PME# disabled
[ 0.248842] PCI: pci_cache_line_size set to 32 bytes
[ 0.256390] Switching to clocksource pit
[ 0.268023] pnp: PnP ACPI: disabled
[ 0.274513] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.279718] PnPBIOS: PnP BIOS support was not detected.
[ 0.296294] PCI: max bus depth: 0 pci_try_num: 1
[ 0.302200] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.306947] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.309966] NET: Registered protocol family 2
[ 0.315352] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.317152] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.322510] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.325969] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.329035] TCP reno registered
[ 0.334480] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.336012] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.343091] NET: Registered protocol family 1
[ 0.344372] PCI: CLS 32 bytes, default 32
[ 0.348699] Unpacking initramfs...
[ 2.398842] Freeing initrd memory: 9240k freed
[ 2.410586] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.414837] audit: initializing netlink socket (disabled)
[ 2.419085] type=2000 audit(1330780548.416:1): initialized
[ 2.568696] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.576402] VFS: Disk quotas dquot_6.5.2
[ 2.580314] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.588189] msgmni has been set to 497
[ 2.596270] alg: No test for stdrng (krng)
[ 2.600702] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.606896] io scheduler noop registered
[ 2.610693] io scheduler deadline registered
[ 2.615628] io scheduler cfq registered (default)
[ 2.618957] isapnp: Scanning for PnP cards...
[ 2.975648] isapnp: No Plug & Play device found
[ 2.977510] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.980573] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 2.987423] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 2.991630] Linux agpgart interface v0.103
[ 2.997183] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.002421] i8042: No controller found
[ 3.006072] mousedev: PS/2 mouse device common for all mice
[ 3.011286] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 3.014390] rtc0: alarms up to one day, 114 bytes nvram
[ 3.018382] EISA: Probing bus 0 at eisa.0
[ 3.022440] Cannot allocate resource for EISA slot 1
[ 3.025394] Cannot allocate resource for EISA slot 6
[ 3.028316] EISA: Detected 0 cards.
[ 3.034796] cpuidle: using governor ladder
[ 3.039118] cpuidle: using governor menu
[ 3.044570] TCP cubic registered
[ 3.050417] NET: Registered protocol family 10
[ 3.059374] Mobile IPv6
[ 3.062749] NET: Registered protocol family 17
[ 3.064117] Registering the dns_resolver key type
[ 3.070317] Using IPI Shortcut mode
[ 3.073391] PM: Hibernation image not present or could not be loaded.
[ 3.076755] registered taskstats version 1
[ 3.081623] rtc_cmos rtc_cmos: setting system clock to 2012-03-03 13:15:52 UTC (1330780552)
[ 3.086868] Initializing network drop monitor service
[ 3.090586] Freeing unused kernel memory: 444k freed
[ 3.094362] Write protecting the kernel text: 2564k
[ 3.097204] Write protecting the kernel read-only data: 1044k
Loading, please wait...
[ 3.144621] udevd[42]: starting version 175
[ 3.291032] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 3.370784] via-rhine 0000:00:09.0: setting latency timer to 64
[ 3.411524] via-rhine 0000:00:09.0: eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:00:13:00:00, IRQ 10
[ 3.415309] via-rhine 0000:00:09.0: eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[ 3.417332] Switching to clocksource tsc
[ 3.476932] usbcore: registered new interface driver usbfs
[ 3.494064] SCSI subsystem initialized
[ 3.590170] usbcore: registered new interface driver hub
[ 3.606318] usbcore: registered new device driver usb
[ 3.623758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.647722] libata version 3.00 loaded.
[ 3.662897] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 3.680412] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 3.698674] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 3.744111] ehci_hcd 0000:00:0f.5: irq 12, io mem 0xefffd000
[ 3.772072] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 3.789418] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.809787] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.831436] usb usb1: Product: EHCI Host Controller
[ 3.846071] usb usb1: Manufacturer: Linux 3.2.0-1-486 ehci_hcd
[ 3.863566] usb usb1: SerialNumber: 0000:00:0f.5
[ 3.878733] hub 1-0:1.0: USB hub found
[ 3.890013] hub 1-0:1.0: 4 ports detected
[ 3.902409] pata_amd 0000:00:0f.2: version 0.4.1
[ 3.933031] scsi0 : pata_amd
[ 3.942503] scsi1 : pata_amd
[ 3.951755] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.972640] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 3.998646] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.017340] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 4.034851] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 4.050558] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.072800] ohci_hcd 0000:00:0f.4: irq 12, io mem 0xefffe000
[ 4.176042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.196396] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.218044] usb usb2: Product: OHCI Host Controller
[ 4.232683] usb usb2: Manufacturer: Linux 3.2.0-1-486 ohci_hcd
[ 4.250177] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.265226] hub 2-0:1.0: USB hub found
[ 4.276524] hub 2-0:1.0: 4 ports detected
[ 4.316445] ata1.00: CFA: TS8GCF133, 20101110, max UDMA/66
[ 4.332919] ata1.00: 15662304 sectors, multi 0: LBA
[ 4.356344] ata1.00: configured for UDMA/66
[ 4.369355] scsi 0:0:0:0: Direct-Access ATA TS8GCF133 2010 PQ: 0 ANSI: 5
[ 4.395219] ata2: port disabled--ignoring
[ 4.454486] sd 0:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4.478434] sd 0:0:0:0: [sda] Write Protect is off
[ 4.492837] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.508132] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.538851] sda: sda1 sda2
[ 4.549419] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.936142] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 4.956780] EXT4-fs (sda1): write access will be enabled during recovery
[ 5.016153] Clocksource tsc unstable (delta = 108006330 ns)
[ 5.033106] Switching to clocksource pit
[ 5.765095] EXT4-fs (sda1): recovery complete
[ 5.782013] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[ 6.543746] udevd[172]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 6.873679] AMD Geode RNG detected
[ 6.890156] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff]
[ 6.892634] cs5535-gpio cs5535-gpio: GPIO support successfully loaded.
[ 6.975224] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 7.006231] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 7.170854] Intel AES-NI instructions are not detected.
[ 7.431959] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0x623f]
[ 7.434962] cs5535-mfgpt cs5535-mfgpt: 8 MFGPT timers available
[ 7.450471] geode-aes: GEODE AES engine enabled.
[ 7.468396] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
done.
Activating swap...done.
[ 7.745814] EXT4-fs (sda1): re-mounted. Opts: (null)
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux 2.20.1
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Cleaning up ifupdown....
Setting up networking....
Configuring network interfaces...done.
Cleaning up temporary files....
Setting up ALSA...done (none loaded).
Setting kernel variables ...done.
[ 9.726569] via-rhine 0000:00:09.0: eth0: link down
[ 9.729570] ADDRCONF(NETDEV_UP): eth0: link is not ready
Give root password for maintenance
(or type Control-D to continue):
Reply to: