Bug#661920: linux-image-2.6.32-5-amd64: mounting some CDs lead to "Unhandled sense code"s which make autodetection fail
Package: linux-2.6
Version: 2.6.32-41
Severity: normal
When using some CDs there are "Unhandled sense code" messges for
the device. This leads to Plasma's autodetection of the device to fail
and does not display the device.
There is a very good chance the CD can still be mounted manually.
I am opening this report, because in #583949 Ben Hutchings recommend it.
Also because I believe this is related to software somehow and not gone.
It probably will take some effort by the Debian, kernel and Free Software
communities to get a closer grip on this defect.
Any hints towards further analysis are highly appreciated!
Bernhard
Details:
I have two drives available for the testing on an amd machine,
running an amd kernel with 32bit userspace.
One drive is build in, the other is usb.
Both show the symptoms.
If I have a CD that is affected, it will have problems in both drives.
Booting into windows XP, there is no issue.
Running grml96_2011.12.iso from an usb stick there is no
issue, it has linux-image-3.1.0-3-grml-amd64, but has not autodetection anyway.
The symptoms:
Putting the CD in the drive, it will take some time, more than usual
a few seconds more. Then the syslog shows a number of blocks like:
sr 6:0:0:0: [sr1] Unhandled sense code
sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr1] Sense Key : Medium Error [current]
sr 6:0:0:0: [sr1] Add. Sense: L-EC uncorrectable error
sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 02 55 a0 00 00 02 00 00 00
end_request: I/O error, dev sr1, sector 611968
Buffer I/O error on device sr1, logical block 76496
sr 6:0:0:0: [sr1] Unhandled sense code
sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr1] Sense Key : Medium Error [current]
sr 6:0:0:0: [sr1] Add. Sense: L-EC uncorrectable error
sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 02 55 a0 00 00 02 00 00 00
end_request: I/O error, dev sr1, sector 611968
Buffer I/O error on device sr1, logical block 76496
Maybe 3 or more. No device appears in the Plasma gui.
A manual "mount /mnt/cdrom" usually succeeds.
Expected would be that there are no messages and the device is coming up
(fast) in the gui and can be mounted from there.
Further details: I had problems with burned CDs from both drives.
However it is also possible to burn CDs which are accepted fine
(which I did today twice).
It is unclear which CDs have this issue.
And it is strange that the data can still be read manually
and read by windows xp.
I've tried linux-image-3.2.0-0.bpo.1-amd64
(3.2.4-1~bpo60+1 Debian Backports:squeeze-backports)
which did not help.
Given the number of issues that are related to this,
it seems less likely that I really got unlucky with a number of suboptimal
CD media. Even if so, there still is an issue as windows XP and
manual mount read the CD fine.
Infos about the two drives:
cdrdao drive-info --device /dev/sr0
Cdrdao version 1.2.3 - (C) Andreas Mueller <andreas@daneb.de>
/dev/sr0: TSSTcorp CDDVDW SH-S203D Rev: SB00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
Maximum reading speed: 8468 kB/s
Current reading speed: 8468 kB/s
Maximum writing speed: 8468 kB/s
Current writing speed: 8468 kB/s
BurnProof supported: yes
JustLink supported: yes
JustSpeed supported: no
cdrdao drive-info --device /dev/sr1
Cdrdao version 1.2.3 - (C) Andreas Mueller <andreas@daneb.de>
/dev/sr1: TSSTcorp CDDVDW SE-S204N Rev: TS00
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
Maximum reading speed: 8468 kB/s
Current reading speed: 8468 kB/s
Maximum writing speed: 8468 kB/s
Current writing speed: 8468 kB/s
BurnProof supported: yes
JustLink supported: yes
JustSpeed supported: no
Here are related issue reports:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=583949
2.6.32-3-amd64 can't read DVDs/CDs (sometimes)
From: Ben Hutchings <ben@decadent.org.uk>
If anyone is still having trouble reading CDs or DVDs in the current
kernel version in stable (2.6.32-35) or unstable (3.0.0-1), please open
a *new* bug report.
There is a new one:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=641288
(linux-image-2.6.32-5-686: Can not read appendable cdroms/dvds)
Though it is unsure if this is the same issue as appendable CDs are
addressed in particular.
http://forum.kde.org/viewtopic.php?f=19&t=91402#
CD Dvd drive not working in KDE 4.5.x
The solution here seems to have been to disable some sort of autodetection.
http://www.linuxquestions.org/questions/slackware-14/slackware64-current-doesnt-read-cd-r-disks-as-well-as-slack-12-1-does-801015/
http://www.linuxquestions.org/questions/slackware-14/cd-mounting-errors-iso9660-812240/page3.html
http://www.linuxquestions.org/questions/slackware-14/slack-13-1-does-not-recognize-mounted-cd-810509/
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 17:15:00 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=9a88ef7c-9a1f-4436-9f31-a77a9725cd3d ro quiet
** Not tainted
** Kernel log:
** Model information
sys_vendor: MICRO-STAR INTERANTIONAL CO.,LTD
product_name: MS-7368
product_version: 1.0
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: V1.5
board_vendor: MICRO-STAR INTERANTIONAL CO.,LTD
board_name: MS-7368
board_version: 1.0
** Loaded modules:
Module Size Used by
isofs 27432 0
ip6table_filter 2384 0
ip6_tables 14883 1 ip6table_filter
iptable_filter 2258 0
ip_tables 13691 1 iptable_filter
ebtable_nat 1588 0
ebtables 13901 1 ebtable_nat
x_tables 12685 3 ip6_tables,ip_tables,ebtables
kvm_amd 31862 0
kvm 214152 1 kvm_amd
fuse 50732 1
nls_utf8 1208 1
nls_cp437 5817 1
vfat 7836 1
fat 39990 1 vfat
xfs 434953 5
exportfs 3122 1 xfs
snd_hda_codec_atihdmi 2251 1
snd_hda_codec_realtek 235218 1
snd_hda_intel 20035 2
snd_hda_codec 53892 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5220 1 snd_hda_codec
snd_pcm_oss 32415 0
snd_mixer_oss 12478 1 snd_pcm_oss
snd_pcm 60151 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4256 0
snd_rawmidi 15323 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 41281 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15502 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
radeon 574492 2
ttm 40162 1 radeon
snd 45998 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
drm_kms_helper 20289 1 radeon
i2c_piix4 8328 0
soundcore 4566 1 snd
drm 141911 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 4209 1 radeon
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
i2c_core 15451 5 radeon,drm_kms_helper,i2c_piix4,drm,i2c_algo_bit
psmouse 49937 0
processor 29871 0
k8temp 3283 0
serio_raw 3752 0
pcspkr 1699 0
edac_core 29197 0
hid_apple 4594 0
evdev 7352 10
edac_mce_amd 6433 0
button 4650 0
usbhid 33276 0
hid 63209 2 hid_apple,usbhid
ext3 106534 1
jbd 37077 1 ext3
mbcache 5050 1 ext3
dm_mod 53594 20
usb_storage 40121 0
sg 23893 0
sd_mod 29713 5
crc_t10dif 1276 1 sd_mod
sr_mod 12250 0
cdrom 28631 1 sr_mod
ata_generic 3239 0
ohci_hcd 19343 0
ahci 32822 4
firewire_ohci 19628 0
firewire_core 36704 1 firewire_ohci
r8169 36840 0
crc_itu_t 1307 1 firewire_core
mii 3210 1 r8169
pata_atiixp 3489 0
thermal 11610 0
thermal_sys 11942 2 processor,thermal
ehci_hcd 32081 0
libata 133264 3 ata_generic,ahci,pata_atiixp
usbcore 122834 5 usbhid,usb_storage,ohci_hcd,ehci_hcd
nls_base 6377 6 isofs,nls_utf8,nls_cp437,vfat,fat,usbcore
scsi_mod 126261 5 usb_storage,sg,sd_mod,sr_mod,libata
** Network interface configuration:
** Network status:
*** IP interfaces and addresses:
*** Device statistics:
*** Protocol statistics:
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1002:7913] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7327]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 7000 [size=16]
Region 5: Memory at fe8ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: <access denied>
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Micro-Star International Co., Ltd. Device [1462:7368]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: Micro-Star International Co., Ltd. K9AG Neo2 [1462:7368]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 13fd:2040 Initio Corporation
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.4
APT prefers stable
APT policy: (550, 'stable')
Architecture: i386 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii linux-base 3.4~bpo60+1 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-41 Binary firmware for various driver
ii libc6-i686 2.11.3-2 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
Versions of packages linux-image-2.6.32-5-amd64 is related to:
ii firmware-linux 0.28+squeeze1 Binary firmware for various driver
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
* linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
Reply to: