[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#642911: marked as done (TX watchdog timeout on RTL8168B)



Your message dated Sun, 19 Feb 2012 20:18:33 -0600
with message-id <20120220021832.GF969@burratino>
and subject line Re: TX watchdog timeout on RTL8168B
has caused the Debian Bug report #642911,
regarding TX watchdog timeout on RTL8168B
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
642911: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=642911
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-35squeeze2
Severity: important



-- dmesg output when error occured:
[10547.092995] r8169: eth0: link up
[10553.286740] r8169: eth0: link up
[10715.593791] ------------[ cut here ]------------
[10715.593832] WARNING: at
/build/buildd-linux-2.6_2.6.32-35squeeze2-i386-XoyoyB/linux-2.6-2.6.32/debian/build/source_i386_none/net/
sched/sch_generic.c:261 dev_watchdog+0xbd/0x15d()
[10715.593853] Hardware name: CM-iAM/SBC-FITPC2i
[10715.593865] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
[10715.593877] Modules linked in: nfs fscache nls_utf8 sg sr_mod cdrom
usb_storage isofs udf crc_itu_t sco bridge stp bnep l2cap blu
etooth parport_pc ppdev lp parport cpufreq_userspace
cpufreq_conservative cpufreq_stats cpufreq_powersave nfsd lockd nfs_acl
auth_rp
cgss sunrpc exportfs fuse ext2 coretemp acpi_cpufreq loop rt2870sta(C)
arc4 ecb snd_usb_audio rt2800usb snd_usb_lib rt2x00usb snd_se
q_midi snd_hda_codec_realtek snd_hda_intel rt2x00lib snd_seq_midi_event
mac80211 snd_hda_codec uvcvideo cfg80211 snd_rawmidi snd_pcm
 snd_hwdep snd_seq usbhid videodev rfkill snd_timer snd_seq_device
psmouse snd crc_ccitt serio_raw evdev i2c_isch cdc_acm v4l1_compa
t soundcore hid battery ac button processor pcspkr snd_page_alloc
i2c_core video output ext4 mbcache jbd2 crc16 sd_mod crc_t10dif at
a_generic pata_sch libata uhci_hcd thermal sdhci_pci sdhci scsi_mod
r8169 ehci_hcd mii mmc_core led_class usbcore nls_base thermal_s
ys [last unloaded: scsi_wait_scan]
[10715.594268] Pid: 0, comm: swapper Tainted: G         C 2.6.32-5-686 #1
[10715.594280] Call Trace:
[10715.594309]  [<c1030709>] ? warn_slowpath_common+0x5e/0x8a
[10715.594330]  [<c11e8eb8>] ? dev_watchdog+0x0/0x15d
[10715.594349]  [<c1030767>] ? warn_slowpath_fmt+0x26/0x2a
[10715.594368]  [<c11e8f75>] ? dev_watchdog+0xbd/0x15d
[10715.594393]  [<c1020039>] ? load_balance_rt+0x0/0x3
[10715.594414]  [<c104148a>] ? insert_work+0x71/0x78
[10715.594435]  [<c103af4c>] ? run_timer_softirq+0x16a/0x1eb
[10715.594457]  [<c10357da>] ? __do_softirq+0xaa/0x156
[10715.594477]  [<c10358b7>] ? do_softirq+0x31/0x3c
[10715.594495]  [<c1035991>] ? irq_exit+0x26/0x58
[10715.594516]  [<c1004699>] ? do_IRQ+0x78/0x89
[10715.594535]  [<c10037f0>] ? common_interrupt+0x30/0x38
[10715.594604]  [<f7fe20f9>] ? acpi_idle_enter_bm+0x261/0x29c [processor]
[10715.594631]  [<c11c69c9>] ? cpuidle_idle_call+0x68/0xbb
[10715.594651]  [<c1002388>] ? cpu_idle+0x89/0xa5
[10715.594673]  [<c13bf806>] ? start_kernel+0x318/0x31d
[10715.594686] ---[ end trace 74ae8a61fd1c8ad1 ]---
[10715.619380] r8169: eth0: link up

-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-35squeeze2) (dannf@debian.org)
(gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:51:05 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686
root=UUID=c8369b5c-f8fa-42d3-a640-ed1feff58e85 ro pcie_aspm=off quiet

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[    8.856720] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.894044] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
[    8.895052] usbcore: registered new interface driver cdc_acm
[    8.895533] cdc_acm: v0.26:USB Abstract Control Model driver for USB
modems and ISDN adapters
[    9.009516] Linux video capture interface: v2.00
[    9.096311] cfg80211: Using static regulatory domain info
[    9.096318] cfg80211: Regulatory domain: US
[    9.096323]  (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[    9.096331]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    9.096338]  (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    9.096345]  (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    9.096352]  (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    9.096359]  (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    9.096367]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    9.096619] cfg80211: Calling CRDA for country: US
[    9.490509] uvcvideo: Found UVC 1.00 device WC060 Series HD Webcam
(177f:0060)
[    9.493141] input: WC060 Series HD Webcam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
[    9.493393] usbcore: registered new interface driver uvcvideo
[    9.493544] USB Video Class driver (v0.1.0)
[    9.837538] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[    9.837622] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.840912] phy0: Selected rate control algorithm 'minstrel'
[    9.842895] Registered led device: rt2800usb-phy0::radio
[    9.842943] Registered led device: rt2800usb-phy0::assoc
[    9.842991] Registered led device: rt2800usb-phy0::quality
[    9.843563] usbcore: registered new interface driver rt2800usb
[    9.985348] rt2870sta: module is from the staging directory, the
quality is unknown, you have been warned.
[    9.996976] rtusb init --->
[    9.997135] usbcore: registered new interface driver rt2870
[   10.204541] hda_codec: ALC662 rev1: BIOS auto-probing.
[   10.206514] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[   10.794546] usbcore: registered new interface driver snd-usb-audio
[   11.407776] Adding 3906552k swap on /dev/sda2.  Priority:-1 extents:1
across:3906552k
[   11.825167] loop: module loaded
[   13.938701] r8169: eth0: link down
[   13.939194] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.432594] fuse init (API version 7.13)
[   16.797262] RPC: Registered udp transport module.
[   16.797269] RPC: Registered tcp transport module.
[   16.797273] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.098293] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   17.414527] svc: failed to register lockdv1 RPC service (errno 97).
[   17.417639] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[   17.549776] NFSD: starting 90-second grace period
[   19.314878] Bluetooth: Core ver 2.15
[   19.315462] NET: Registered protocol family 31
[   19.315476] Bluetooth: HCI device and connection manager initialized
[   19.315492] Bluetooth: HCI socket layer initialized
[   19.462223] Bluetooth: L2CAP ver 2.14
[   19.462237] Bluetooth: L2CAP socket layer initialized
[   19.760566] Bluetooth: RFCOMM TTY layer initialized
[   19.760578] Bluetooth: RFCOMM socket layer initialized
[   19.760583] Bluetooth: RFCOMM ver 1.11
[   20.031845] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.031851] Bluetooth: BNEP filters: protocol multicast
[   20.117107] Bridge firewalling registered
[   20.266813] Bluetooth: SCO (Voice Link) ver 0.6
[   20.266819] Bluetooth: SCO socket layer initialized
[   20.543047] lp: driver loaded but no devices found
[   20.640278] ppdev: user-space parallel port driver
[   96.860129] usb 1-1: USB disconnect, address 2
[   96.860145] usb 1-1.1: USB disconnect, address 5
[   96.861262] usb 1-1.3: USB disconnect, address 6
[   96.891066] usb 1-1.4: USB disconnect, address 7
[   97.132311] usb 1-1: new high speed USB device using ehci_hcd and
address 9
[   97.266713] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[   97.266731] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[   97.266745] usb 1-1: Product: USB2.0 Hub
[   97.267168] usb 1-1: configuration #1 chosen from 1 choice
[   97.267922] hub 1-1:1.0: USB hub found
[   97.269558] hub 1-1:1.0: 4 ports detected
[   97.540859] usb 1-1.1: new high speed USB device using ehci_hcd and
address 10
[   97.634837] usb 1-1.1: New USB device found, idVendor=05e3,
idProduct=0608
[   97.634855] usb 1-1.1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[   97.634869] usb 1-1.1: Product: USB2.0 Hub
[   97.635310] usb 1-1.1: configuration #1 chosen from 1 choice
[   97.637874] hub 1-1.1:1.0: USB hub found
[   97.638272] hub 1-1.1:1.0: 4 ports detected
[   97.712864] usb 1-1.3: new high speed USB device using ehci_hcd and
address 11
[   97.861587] usb 1-1.3: New USB device found, idVendor=177f,
idProduct=0060
[   97.861606] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[   97.861620] usb 1-1.3: Product: WC060 Series HD Webcam
[   97.861630] usb 1-1.3: Manufacturer: Sweex
[   97.862075] usb 1-1.3: configuration #1 chosen from 1 choice
[   97.864749] uvcvideo: Found UVC 1.00 device WC060 Series HD Webcam
(177f:0060)
[   97.867683] input: WC060 Series HD Webcam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[   98.948819] usb 1-1.4: new full speed USB device using ehci_hcd and
address 12
[   99.045589] usb 1-1.4: New USB device found, idVendor=03eb,
idProduct=204b
[   99.045608] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[   99.045621] usb 1-1.4: Product: CUL868
[   99.045630] usb 1-1.4: Manufacturer: busware.de
[   99.046077] usb 1-1.4: configuration #1 chosen from 1 choice
[   99.046778] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
[  146.358948] r8169: eth0: link up
[  146.359889] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6446.200217] rt2800usb 1-7:1.0: firmware: requesting rt2870.bin
[ 6446.520840] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8310.840938] cfg80211: Calling CRDA for country: DE
[ 8320.957189] wlan0: no IPv6 routers present
[ 9590.696055] wlan0: no IPv6 routers present

** Model information
not available

** Loaded modules:
Module                  Size  Used by
isofs                  24608  0
udf                    63002  0
crc_itu_t               1035  1 udf
parport_pc             15799  0
ppdev                   4058  0
lp                      5570  0
parport                22554  3 parport_pc,ppdev,lp
sco                     5885  2
bridge                 33051  0
stp                      996  1 bridge
bnep                    7468  2
rfcomm                 25215  0
l2cap                  21721  4 bnep,rfcomm
bluetooth              36335  6 sco,bnep,rfcomm,l2cap
cpufreq_userspace       1488  0
cpufreq_conservative     4018  0
cpufreq_stats           1940  0
cpufreq_powersave        602  0
nfsd                  194111  11
lockd                  49481  1 nfsd
nfs_acl                 1695  1 nfsd
auth_rpcgss            25284  1 nfsd
sunrpc                134944  10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs                2626  1 nfsd
fuse                   44304  1
ext2                   46277  1
coretemp                3401  0
acpi_cpufreq            4959  1
loop                    9773  0
snd_hda_codec_realtek   163306  1
rt2870sta             326811  0
snd_hda_intel          16831  0
arc4                     974  2
snd_usb_audio          50678  0
snd_hda_codec          46002  2 snd_hda_codec_realtek,snd_hda_intel
snd_usb_lib            11200  1 snd_usb_audio
ecb                     1405  2
snd_seq_midi            3576  0
rt2800usb              24927  0
snd_pcm                47226  3 snd_hda_intel,snd_usb_audio,snd_hda_codec
psmouse                44817  0
uvcvideo               45526  0
snd_seq_midi_event      3684  1 snd_seq_midi
rt2x00usb               5729  1 rt2800usb
snd_rawmidi            12513  2 snd_usb_lib,snd_seq_midi
snd_seq                35495  2 snd_seq_midi,snd_seq_midi_event
rt2x00lib              19109  2 rt2800usb,rt2x00usb
mac80211              123746  2 rt2x00usb,rt2x00lib
snd_hwdep               4054  2 snd_usb_audio,snd_hda_codec
cfg80211               87797  2 rt2x00lib,mac80211
rfkill                 10280  3 bluetooth,cfg80211
snd_timer              12258  2 snd_pcm,snd_seq
videodev               25569  1 uvcvideo
crc_ccitt               1039  2 rt2870sta,rt2800usb
i2c_isch                2690  0
v4l1_compat            10250  2 uvcvideo,videodev
snd_seq_device          3673  3 snd_seq_midi,snd_rawmidi,snd_seq
serio_raw               2916  0
i2c_core               12795  2 videodev,i2c_isch
cdc_acm                12582  0
evdev                   5609  2
pcspkr                  1207  0
snd                    34431  10
snd_hda_codec_realtek,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_pcm,snd_rawmidi,snd_seq,snd_hwdep,snd_timer,snd_seq_device
soundcore               3450  1 snd
video                  14605  0
button                  3598  0
ac                      1640  0
snd_page_alloc          5061  2 snd_hda_intel,snd_pcm
battery                 3782  0
output                  1204  1 video
processor              26343  3 acpi_cpufreq
usbhid                 28040  0
hid                    50925  1 usbhid
ext4                  256968  1
mbcache                 3762  2 ext2,ext4
jbd2                   56219  1 ext4
crc16                   1027  2 l2cap,ext4
sd_mod                 26021  4
crc_t10dif              1012  1 sd_mod
ata_generic             2247  0
pata_sch                1546  4
uhci_hcd               16073  0
thermal                 9206  0
r8168                 137847  0
sdhci_pci               4589  0
sdhci                  12187  1 sdhci_pci
libata                115913  2 ata_generic,pata_sch
thermal_sys             9378  3 video,processor,thermal
ehci_hcd               28749  0
r8169                  25294  0
mii                     2714  1 r8169
mmc_core               38781  1 sdhci
led_class               1757  2 rt2x00lib,sdhci
scsi_mod              104889  2 sd_mod,libata
usbcore                98865  11
rt2870sta,snd_usb_audio,snd_usb_lib,rt2800usb,uvcvideo,rt2x00usb,cdc_acm,usbhid,uhci_hcd,ehci_hcd
nls_base                4541  3 isofs,udf,usbcore

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
#iface eth0 inet dhcp
iface eth0 inet static
        address 192.168.178.13
        netmask 255.255.255.0
        network 192.168.178.0
        broadcast 192.168.178.255
        gateway 192.168.178.1
        up ip -6 addr add 2001:4dd0:f934:1000:201:c0ff:fe08:aa31/64 dev eth0
        # dns-* options are implemented by the resolvconf package, if
installed
        #dns-nameservers 192.168.178.1
        #dns-search gkehrer.local


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
    link/ether 00:01:c0:08:aa:31 brd ff:ff:ff:ff:ff:ff
    inet 192.168.178.13/24 brd 192.168.178.255 scope global eth0
    inet6 2001:xxxx:xxxx:xxxx:201:c0ff:fe08:aa31/64 scope global
       valid_lft forever preferred_lft forever
    inet6 fe80::201:c0ff:fe08:aa31/64 scope link
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 00:01:c0:08:aa:32 brd ff:ff:ff:ff:ff:ff
4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000
    link/ether 00:0d:f0:95:86:b4 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global wlan0
5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
    link/ether 2e:61:60:3e:bc:1e brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed
multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:   27504     342    0    0    0     0          0         0   
27504     342    0    0    0     0       0          0
  eth0:12385839   32654    0    0    0     0          0         0 
5972630   31301    0    0    0     0       0          0
  eth1:       0       0    0    0    0     0          0         0       
0       0    0    0    0     0       0          0
 wlan0:       0       0    0    0    0     0          0         0   
30750     147    0    0    0     0       0          0
  pan0:       0       0    0    0    0     0          0         0       
0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    27679 total packets received
    0 forwarded
    0 incoming packets discarded
    27667 incoming packets delivered
    30799 requests sent out
Icmp:
    179 ICMP messages received
    76 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 97
        echo requests: 79
        echo replies: 3
    103 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 97
        echo request: 3
        echo replies: 3
IcmpMsg:
        InType0: 3
        InType3: 97
        InType8: 79
        OutType0: 3
        OutType3: 97
        OutType8: 3
Tcp:
    15 active connections openings
    10 passive connection openings
    1 failed connection attempts
    6 connection resets received
    3 connections established
    26177 segments received
    29995 segments send out
    2 segments retransmited
    0 bad segments received.
    350 resets sent
Udp:
    1010 packets received
    77 packets to unknown port received.
    0 packet receive errors
    568 packets sent
UdpLite:
TcpExt:
    4 TCP sockets finished time wait in fast timer
    116 delayed acks sent
    3 packets directly queued to recvmsg prequeue.
    3 bytes directly received in process context from prequeue
    6187 packet headers predicted
    15428 acknowledgments not containing data payload received
    200 predicted acknowledgments
    2 other TCP timeouts
    11 DSACKs sent for old packets
    2 DSACKs received
    2 connections reset due to unexpected data
    TCPDSACKIgnoredOld: 2
IpExt:
    InMcastPkts: 309
    OutMcastPkts: 243
    InBcastPkts: 919
    OutBcastPkts: 198
    InOctets: 11708859
    OutOctets: 5528113
    InMcastOctets: 19965
    OutMcastOctets: 16537
    InBcastOctets: 307676
    OutBcastOctets: 37580

*** Device features:
eth0: 0x180
eth1: 0x180
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH
Poulsbo) [8086:8100] (rev 07)
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:02.0 VGA compatible controller [0300]: Intel Corporation System
Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07)
(prog-if 00 [VGA controller])
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 7
        Region 0: Memory at d8080000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at 1800 [size=8]
        Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=128M]
        Region 3: Memory at d8020000 (32-bit, non-prefetchable) [size=128K]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [b0] Vendor Specific Information: Len=07 <?>
        Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000

00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub
(SCH Poulsbo) HD Audio Controller [8086:811b] (rev 07)
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at d8010000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] Express (v1) Root Complex Integrated
Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
Latency L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM L0s Enabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
                VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
                        Ctrl:   Enable+ ID=1 ArbSelect=Fixed TC/VC=80
                        Status: NegoPending- InProgress-
        Capabilities: [130 v1] Root Complex Link
                Desc:   PortNumber=0f ComponentID=00 EltType=Config
                Link0:  Desc:   TargetPort=00 TargetComponent=00
AssocRCRB- LinkType=MemMapped LinkValid+
                        Addr:   0000000000000000
        Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 1 [8086:8110] (rev 07) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d8100000-d81fffff
        Prefetchable memory behind bridge: d8500000-d85fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
                        ClockPM+ Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
                        Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt-
HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [90] Subsystem: Intel Corporation Device [8086:8119]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 2 [8086:8112] (rev 07) (prog-if 00 [Normal
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: d8200000-d82fffff
        Prefetchable memory behind bridge: d8600000-d86fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
                        ClockPM+ Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
                        Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt-
HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [90] Subsystem: Intel Corporation Device [8086:8119]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB UHCI #1 [8086:8114] (rev 07) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at 1820 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB UHCI #2 [8086:8115] (rev 07) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 1840 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB UHCI #3 [8086:8116] (rev 07) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 1860 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation System Controller Hub
(SCH Poulsbo) USB EHCI #1 [8086:8117] (rev 07) (prog-if 20 [EHCI])
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 21
        Region 0: Memory at d8014000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd

00:1e.0 SD Host controller [0805]: Intel Corporation System Controller
Hub (SCH Poulsbo) SDIO Controller #1 [8086:811c] (rev 07) (prog-if 01)
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at d8014400 (32-bit, non-prefetchable) [size=256]
        Kernel driver in use: sdhci-pci

00:1e.1 SD Host controller [0805]: Intel Corporation System Controller
Hub (SCH Poulsbo) SDIO Controller #2 [8086:811d] (rev 07) (prog-if 01)
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 20
        Region 0: Memory at d8014800 (32-bit, non-prefetchable) [size=256]
        Kernel driver in use: sdhci-pci

00:1e.2 SD Host controller [0805]: Intel Corporation System Controller
Hub (SCH Poulsbo) SDIO Controller #3 [8086:811e] (rev 07) (prog-if 01)
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at d8014c00 (32-bit, non-prefetchable) [size=256]
        Kernel driver in use: sdhci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH
Poulsbo) LPC Bridge [8086:8119] (rev 07)
        Subsystem: Intel Corporation System Controller Hub (SCH Poulsbo)
LPC Bridge [8086:8119]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Kernel driver in use: isch_smbus

00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub
(SCH Poulsbo) IDE Controller [8086:811a] (rev 07) (prog-if 80 [Master])
        Subsystem: Intel Corporation Device [8086:8119]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [size=1]
        Region 4: I/O ports at 1810 [size=16]
        Kernel driver in use: pata_sch

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
        Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller [10ec:8168]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 24
        Region 0: I/O ports at 2000 [size=256]
        Region 2: Memory at d8100000 (64-bit, non-prefetchable) [size=4K]
        Region 4: Memory at d8500000 (64-bit, prefetchable) [size=64K]
        [virtual] Expansion ROM at d8520000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0300c  Data: 4159
        Capabilities: [70] Express (v1) Endpoint, MSI 01
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [d0] Vital Product Data
                Unknown small resource type 05, will not decode more.
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 36-12-26-00-68-4c-e0-00
        Kernel driver in use: r8169

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
        Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller [10ec:8168]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 25
        Region 0: I/O ports at 3000 [size=256]
        Region 2: Memory at d8200000 (64-bit, non-prefetchable) [size=4K]
        Region 4: Memory at d8600000 (64-bit, prefetchable) [size=64K]
        [virtual] Expansion ROM at d8620000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0300c  Data: 4161
        Capabilities: [70] Express (v1) Endpoint, MSI 01
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [d0] Vital Product Data
                Unknown small resource type 05, will not decode more.
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+
ChkEn-
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 36-12-26-00-68-4c-e0-00
        Kernel driver in use: r8169


** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 012: ID 03eb:204b Atmel Corp. LUFA USB to Serial Adapter
Project
Bus 001 Device 011: ID 177f:0060 Sweex
Bus 001 Device 010: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 009: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 008: ID 0557:2213 ATEN International Co., Ltd
Bus 001 Device 004: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070
Wireless Adapter
Bus 001 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.2
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-686 depends on:
ii  debconf [debconf-2.0]  1.5.36.1          Debian configuration
management sy
ii  initramfs-tools [linux 0.98.8            tools for generating an
initramfs
ii  linux-base             2.6.32-35squeeze2 Linux image base package
ii  module-init-tools      3.12-1            tools for managing Linux
kernel mo

Versions of packages linux-image-2.6.32-5-686 recommends:
pn  firmware-linux-free           <none>     (no description available)
ii  libc6-i686                    2.11.2-10  Embedded GNU C Library:
Shared lib

Versions of packages linux-image-2.6.32-5-686 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
ii  firmware-ralink               0.28       Binary firmware for Ralink
wireles
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
  linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
  linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
  linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:




--- End Message ---
--- Begin Message ---
Version: 3.2.6-1

Hi,

Gerd wrote:

> Today I updated to the latest sid kernel (3.2.0-1-686-pae #1 SMP Fri
> Feb 17 06:27:21 UTC 2012)<br>
> The first tests I've done so far by transfering ~30 GB with samba
> showed no more error messages in<br>
> the logs and the eth0 interface is stable. I'll keep the system up and
> running to see if all works OK.<br>

Thanks for checking.  Marking accordingly.

> <br>
> If there are any backports of the fix to the 3.0 and 2.6 kernels I can
> test them as well if you like.<br>

Excellent.  Will respond in a separate message.

> The only thing that's currently not working is the green transfer LED
> when the connection is to my GBit<br>
> switch. If the connection is to an 100MBit switch the LED is working as
> expected.<br>

Feel free to file a separate bug (severity 'minor') if you'd like to
pursue that, and we can try to get it fixed.

Thanks,
Jonathan


--- End Message ---

Reply to: