On Ne 19.úno, maximilian attems wrote: > On Sun, Feb 19, 2012 at 01:22:55PM +0100, Miroslav Jezbera wrote: > > Package: linux-source-3.2 > > Version: 3.2.6-1 > > Severity: important > > Tags: upstream > > > > KMS does not work in newer kernels for Radeon 9250. > > attached dmesg in working and not working case might be nice. > > > I am building custom kernel > > from debian sources, but with same config kernel built from last linux-source-3.2 does not work with X11 - only black screen is shown. > > Adding nomodeset kernel option helps. I have tested almost all kernels I have built. I don't know why, but nomodeset option is not working anymore - it does not help. Also kernel 3.2.1 runs X only in one case. But all 3.1 kernels and 3.3.0-rc1 kernel were working correctly. I have tested boot in text and start gdm manually/restart gdm remotely - screen is still black & I can't switch to another VT. > do you happen to have linux-firmware-nonfree installed? ii firmware-linux 0.35 Binary firmware for various drivers in the Linux kernel ii firmware-linux-free 3 Binary firmware for various drivers in the Linux kernel ii firmware-linux-nonfr 0.35 Binary firmware for various drivers in the Linux kernel > > These kernel sources are ok: > > linux-source-3.1 3.1.8-2 > > linux-source-3.2 3.2.1-2 > > linux-3.3.0-rc1 linux-stable.git > > > > git log --max-count=1: > > ====================================================== > > commit dcd6c92267155e70a94b3927bce681ce74b80d1f > > Author: Linus Torvalds <torvalds@linux-foundation.org> > > Date: Thu Jan 19 15:04:48 2012 -0800 > > > > Linux 3.3-rc1 > > ====================================================== > > what is that reference related for? I have tested upstream kernel - 3.3.0-rc1 was working. I am not familiar with git, so I have searched for svn info equivalent. I have added this log to show version of upstream kernel, that I was testing. > > In these kernel sources is bug: > > linux-source-3.2 3.2.4-1 & 3.2.6-1 > > > > kind regards > > -- > maks -- Jezz mail: jezz@hkfree.org jabber: jezz@njs.netlab.cz
KF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007ff30000 - 000000007fffffff hpet clockevent registered Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x00000000 window] pnp 00:00: [mem 0x80000000-0xffefffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0060] pnp 00:03: [io 0x0064] pnp 00:03: [irq 1] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:04: [irq 12] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0-0x00ff] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x03f8-0x03ff] pnp 00:07: [irq 4] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:08: [io 0x0000-0xffffffff disabled] pnp 00:08: [io 0x0680-0x06ff] pnp 00:08: [io 0x0290-0x0297] system 00:08: [io 0x0680-0x06ff] has been reserved system 00:08: [io 0x0290-0x0297] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x003f] pnp 00:09: [io 0x0044-0x005f] pnp 00:09: [io 0x0062-0x0063] pnp 00:09: [io 0x0065-0x006f] pnp 00:09: [io 0x0072-0x007f] pnp 00:09: [io 0x0080] pnp 00:09: [io 0x0084-0x0086] pnp 00:09: [io 0x0088] pnp 00:09: [io 0x008c-0x008e] pnp 00:09: [io 0x0090-0x009f] pnp 00:09: [io 0x00a2-0x00bf] pnp 00:09: [io 0x00e0-0x00ef] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x0800-0x087f] pnp 00:09: [io 0x0000-0xffffffff disabled] pnp 00:09: [io 0x0480-0x04bf] pnp 00:09: [mem 0xfed20000-0xfed8ffff] pnp 00:09: [mem 0xffb00000-0xffbfffff] system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x0800-0x087f] has been reserved system 00:09: [io 0x0480-0x04bf] has been reserved system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [mem 0xfec00000-0xfec00fff] pnp 00:0a: [mem 0xfee00000-0xfee00fff] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0x00000000-0x0009ffff] pnp 00:0b: [mem 0x000c0000-0x000dffff] pnp 00:0b: [mem 0x000e0000-0x000fffff] pnp 00:0b: [mem 0x00100000-0x7ffeffff] pnp 00:0b: [mem 0xfff00000-0xffffffff] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0b: [mem 0x00100000-0x7ffeffff] could not be reserved system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff]) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xf7efffff pref] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1e.0: PCI bridge to [bus 03-03] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xf7efffff pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 16 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 2724k freed highmem bounce pool size: 64 pages SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled msgmni has been set to 1734 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Uniform Multi-Platform E-IDE driver i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 300k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 udevd[379]: starting version 175 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e1000 0000:02:01.0: setting latency timer to 64 libata version 3.00 loaded. ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 uhci_hcd: USB Universal Host Controller Interface driver scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA ata2.00: ATAPI: TSSTcorp CDDVDW SH-S202N, SB01, max UDMA/66 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST380021A 3.19 PQ: 0 ANSI: 5 ata2.00: configured for UDMA/66 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202N SB01 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sda: sda1 sda2 < sda5 sda6 > sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:11:2f:63:ec:48 e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection usb 2-1: new low-speed USB device number 2 using uhci_hcd Refined TSC clocksource calibration: 2792.999 MHz. Switching to clocksource tsc generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550 FW:828.D2.I USB FW:D2] on usb-0000:00:1d.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver XFS (sda3): Mounting Filesystem XFS (sda3): Ending clean mount udevd[583]: starting version 175 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input4 b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 2 b2c2_flexcop_pci 0000:03:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 DVB: registering new adapter (FlexCop Digital TV device) b2c2-flexcop: MAC address = 00:d0:d7:16:5c:86 CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) CX24123: wrong demod revision: 87 b2c2-flexcop: found 'Zarlink MT352 DVB-T' . DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 snd_intel8x0 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 51001 usecs (2458 samples) intel8x0: clocking to 48000 Real Time Clock Driver v1.12b Adding 1001916k swap on /dev/sda6. Priority:-1 extents:1 across:1001916k lirc_dev: IR Remote Control driver registered, major 253 lirc_serial: module is from the staging directory, the quality is unknown, you have been warned. lirc_serial: auto-detected active low receiver lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0 w83627hf: w83627hf: Found W83627THF chip at 0x290 ide-cd driver 5.00 NET: Registered protocol family 10 XFS (sda4): Mounting Filesystem XFS (sda4): Ending clean mount fuse init (API version 7.17) ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x1458:0x4054). [drm] register mmio base: 0xFE8F0000 [drm] register mmio size: 65536 agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode radeon 0000:01:00.0: putting AGP V3 device into 8x mode radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 444170 kiB. [TTM] Zone highmem: Available graphics memory: 1037678 kiB. [TTM] Initializing pool allocator. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 64M of GTT memory ready. radeon 0000:01:00.0: WB disabled [drm] Loading R200 Microcode [drm] radeon: ring at 0x00000000F8001000 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] DFP1: INTERNAL_TMDS1 [drm] Connector 2: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_DAC2 [drm] fb mappable at 0xE8040000 [drm] vram apper at 0xE8000000 [drm] size 7057408 [drm] fb depth is 24 [drm] pitch is 6720 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 210x65 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
H] (IRQs 3 4 5 6 7 10 *11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007ff30000 - 000000007fffffff hpet clockevent registered Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x00000000 window] pnp 00:00: [mem 0x80000000-0xffefffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0060] pnp 00:03: [io 0x0064] pnp 00:03: [irq 1] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:04: [irq 12] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0-0x00ff] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x03f8-0x03ff] pnp 00:07: [irq 4] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:08: [io 0x0000-0xffffffff disabled] pnp 00:08: [io 0x0680-0x06ff] pnp 00:08: [io 0x0290-0x0297] system 00:08: [io 0x0680-0x06ff] has been reserved system 00:08: [io 0x0290-0x0297] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x003f] pnp 00:09: [io 0x0044-0x005f] pnp 00:09: [io 0x0062-0x0063] pnp 00:09: [io 0x0065-0x006f] pnp 00:09: [io 0x0072-0x007f] pnp 00:09: [io 0x0080] pnp 00:09: [io 0x0084-0x0086] pnp 00:09: [io 0x0088] pnp 00:09: [io 0x008c-0x008e] pnp 00:09: [io 0x0090-0x009f] pnp 00:09: [io 0x00a2-0x00bf] pnp 00:09: [io 0x00e0-0x00ef] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x0800-0x087f] pnp 00:09: [io 0x0000-0xffffffff disabled] pnp 00:09: [io 0x0480-0x04bf] pnp 00:09: [mem 0xfed20000-0xfed8ffff] pnp 00:09: [mem 0xffb00000-0xffbfffff] system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x0800-0x087f] has been reserved system 00:09: [io 0x0480-0x04bf] has been reserved system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [mem 0xfec00000-0xfec00fff] pnp 00:0a: [mem 0xfee00000-0xfee00fff] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0x00000000-0x0009ffff] pnp 00:0b: [mem 0x000c0000-0x000dffff] pnp 00:0b: [mem 0x000e0000-0x000fffff] pnp 00:0b: [mem 0x00100000-0x7ffeffff] pnp 00:0b: [mem 0xfff00000-0xffffffff] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0b: [mem 0x00100000-0x7ffeffff] could not be reserved system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xf7efffff pref] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1e.0: PCI bridge to [bus 03-03] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xf7efffff pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 16 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 2688k freed highmem bounce pool size: 64 pages SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled msgmni has been set to 1734 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 296k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 udevd[374]: starting version 175 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub SCSI subsystem initialized usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported libata version 3.00 loaded. e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000 0000:02:01.0: setting latency timer to 64 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: setting latency timer to 64 uhci_hcd: USB Universal Host Controller Interface driver scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ata2.00: ATAPI: TSSTcorp CDDVDW SH-S202N, SB01, max UDMA/66 ata2.00: configured for UDMA/66 ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST380021A 3.19 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202N SB01 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sda: sda1 sda2 < sda5 sda6 > sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:11:2f:63:ec:48 e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection usb 2-1: new low-speed USB device number 2 using uhci_hcd Refined TSC clocksource calibration: 2792.999 MHz. Switching to clocksource tsc generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550 FW:828.D2.I USB FW:D2] on usb-0000:00:1d.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver XFS (sda3): Mounting Filesystem XFS (sda3): Ending clean mount udevd[584]: starting version 175 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input4 b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 2 DVB: registering new adapter (FlexCop Digital TV device) b2c2-flexcop: MAC address = 00:d0:d7:16:5c:86 CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) CX24123: wrong demod revision: 87 snd_intel8x0 0000:00:1f.5: setting latency timer to 64 b2c2-flexcop: found 'Zarlink MT352 DVB-T' . DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete intel8x0_measure_ac97_clock: measured 50134 usecs (2416 samples) intel8x0: clocking to 48000 Real Time Clock Driver v1.12b Adding 1001916k swap on /dev/sda6. Priority:-1 extents:1 across:1001916k lirc_dev: IR Remote Control driver registered, major 253 lirc_serial: module is from the staging directory, the quality is unknown, you have been warned. lirc_serial: auto-detected active low receiver lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0 w83627hf: w83627hf: Found W83627THF chip at 0x290 NET: Registered protocol family 10 XFS (sda4): Mounting Filesystem XFS (sda4): Ending clean mount fuse init (API version 7.18) ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5 [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x1458:0x4054). [drm] register mmio base: 0xFE8F0000 [drm] register mmio size: 65536 agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode radeon 0000:01:00.0: putting AGP V3 device into 8x mode radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 444190 kiB. [TTM] Zone highmem: Available graphics memory: 1037698 kiB. [TTM] Initializing pool allocator. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 64M of GTT memory ready. [drm] radeon: ib pool ready. radeon 0000:01:00.0: WB disabled [drm] fence driver on ring 0 use gpu addr 0xf8000000 and cpu addr 0xf8008000 [drm] Loading R200 Microcode [drm] radeon: ring at 0x00000000F8001000 [drm] ring test succeeded in 1 usecs [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] DFP1: INTERNAL_TMDS1 [drm] Connector 2: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_DAC2 [drm] fb mappable at 0xE8040000 [drm] vram apper at 0xE8000000 [drm] size 7057408 [drm] fb depth is 24 [drm] pitch is 6720 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 210x65 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.13.0 20080528 for 0000:01:00.0 on minor 0 usb 1-4: new high-speed USB device number 3 using ehci_hcd Initializing USB Mass Storage driver... scsi2 : usb-storage 1-4:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 2:0:0:0: Direct-Access Samsung M3 Station 3 1AQ1 PQ: 0 ANSI: 0 sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 2:0:0:0: [sdb] No Caching mode page present sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] No Caching mode page present sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] No Caching mode page present sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Attached SCSI disk XFS (sdb1): Mounting Filesystem XFS (sdb1): Ending clean mount PPP generic driver version 2.4.2 PPP MPPE Compression module registered
15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007ff30000 - 000000007fffffff hpet clockevent registered Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x00000000 window] pnp 00:00: [mem 0x80000000-0xffefffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0060] pnp 00:03: [io 0x0064] pnp 00:03: [irq 1] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:04: [irq 12] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0-0x00ff] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x03f8-0x03ff] pnp 00:07: [irq 4] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:08: [io 0x0000-0xffffffff disabled] pnp 00:08: [io 0x0680-0x06ff] pnp 00:08: [io 0x0290-0x0297] system 00:08: [io 0x0680-0x06ff] has been reserved system 00:08: [io 0x0290-0x0297] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x003f] pnp 00:09: [io 0x0044-0x005f] pnp 00:09: [io 0x0062-0x0063] pnp 00:09: [io 0x0065-0x006f] pnp 00:09: [io 0x0072-0x007f] pnp 00:09: [io 0x0080] pnp 00:09: [io 0x0084-0x0086] pnp 00:09: [io 0x0088] pnp 00:09: [io 0x008c-0x008e] pnp 00:09: [io 0x0090-0x009f] pnp 00:09: [io 0x00a2-0x00bf] pnp 00:09: [io 0x00e0-0x00ef] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x0800-0x087f] pnp 00:09: [io 0x0000-0xffffffff disabled] pnp 00:09: [io 0x0480-0x04bf] pnp 00:09: [mem 0xfed20000-0xfed8ffff] pnp 00:09: [mem 0xffb00000-0xffbfffff] system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x0800-0x087f] has been reserved system 00:09: [io 0x0480-0x04bf] has been reserved system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [mem 0xfec00000-0xfec00fff] pnp 00:0a: [mem 0xfee00000-0xfee00fff] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0x00000000-0x0009ffff] pnp 00:0b: [mem 0x000c0000-0x000dffff] pnp 00:0b: [mem 0x000e0000-0x000fffff] pnp 00:0b: [mem 0x00100000-0x7ffeffff] pnp 00:0b: [mem 0xfff00000-0xffffffff] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0b: [mem 0x00100000-0x7ffeffff] could not be reserved system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff]) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xf7efffff pref] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1e.0: PCI bridge to [bus 03-03] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xf7efffff pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 16 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 2724k freed highmem bounce pool size: 64 pages SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled msgmni has been set to 1734 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Uniform Multi-Platform E-IDE driver i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 296k freed udevd[371]: starting version 175 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported SCSI subsystem initialized ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e1000 0000:02:01.0: setting latency timer to 64 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA ata2.00: ATAPI: TSSTcorp CDDVDW SH-S202N, SB01, max UDMA/66 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST380021A 3.19 PQ: 0 ANSI: 5 ata2.00: configured for UDMA/66 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202N SB01 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sda: sda1 sda2 < sda5 sda6 > sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:11:2f:63:ec:48 e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection usb 2-1: new low speed USB device number 2 using uhci_hcd Refined TSC clocksource calibration: 2792.999 MHz. Switching to clocksource tsc generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550 FW:828.D2.I USB FW:D2] on usb-0000:00:1d.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver XFS (sda3): Mounting Filesystem XFS (sda3): Ending clean mount udevd[572]: starting version 175 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] Linux agpgart interface v0.103 ACPI: acpi_idle registered with cpuidle i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input4 b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 2 b2c2_flexcop_pci 0000:03:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 DVB: registering new adapter (FlexCop Digital TV device) b2c2-flexcop: MAC address = 00:d0:d7:16:5c:86 CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) CX24123: wrong demod revision: 87 snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 snd_intel8x0 0000:00:1f.5: setting latency timer to 64 b2c2-flexcop: found 'Zarlink MT352 DVB-T' . DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete intel8x0_measure_ac97_clock: measured 50008 usecs (2410 samples) intel8x0: clocking to 48000 Real Time Clock Driver v1.12b Adding 1001916k swap on /dev/sda6. Priority:-1 extents:1 across:1001916k lirc_dev: IR Remote Control driver registered, major 253 lirc_serial: module is from the staging directory, the quality is unknown, you have been warned. lirc_serial: auto-detected active low receiver lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0 w83627hf: w83627hf: Found W83627THF chip at 0x290 ide-cd driver 5.00 NET: Registered protocol family 10 XFS (sda4): Mounting Filesystem XFS (sda4): Ending clean mount fuse init (API version 7.17) ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.2 input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x1458:0x4054). [drm] register mmio base: 0xFE8F0000 [drm] register mmio size: 65536 agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode radeon 0000:01:00.0: putting AGP V3 device into 8x mode radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 444170 kiB. [TTM] Zone highmem: Available graphics memory: 1037678 kiB. [TTM] Initializing pool allocator. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 64M of GTT memory ready. radeon 0000:01:00.0: WB disabled [drm] Loading R200 Microcode [drm] radeon: ring at 0x00000000F8001000 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] DFP1: INTERNAL_TMDS1 [drm] Connector 2: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_DAC2 [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [drm] Radeon display connector DVI-I-1: Found valid EDID [drm] fb mappable at 0xE8040000 [drm] vram apper at 0xE8000000 [drm] size 7057408 [drm] fb depth is 24 [drm] pitch is 6720 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 210x65 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 0
15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007ff30000 - 000000007fffffff hpet clockevent registered Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x00000000 window] pnp 00:00: [mem 0x80000000-0xffefffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0060] pnp 00:03: [io 0x0064] pnp 00:03: [irq 1] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:04: [irq 12] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0-0x00ff] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x03f8-0x03ff] pnp 00:07: [irq 4] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:08: [io 0x0000-0xffffffff disabled] pnp 00:08: [io 0x0680-0x06ff] pnp 00:08: [io 0x0290-0x0297] system 00:08: [io 0x0680-0x06ff] has been reserved system 00:08: [io 0x0290-0x0297] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x003f] pnp 00:09: [io 0x0044-0x005f] pnp 00:09: [io 0x0062-0x0063] pnp 00:09: [io 0x0065-0x006f] pnp 00:09: [io 0x0072-0x007f] pnp 00:09: [io 0x0080] pnp 00:09: [io 0x0084-0x0086] pnp 00:09: [io 0x0088] pnp 00:09: [io 0x008c-0x008e] pnp 00:09: [io 0x0090-0x009f] pnp 00:09: [io 0x00a2-0x00bf] pnp 00:09: [io 0x00e0-0x00ef] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x0800-0x087f] pnp 00:09: [io 0x0000-0xffffffff disabled] pnp 00:09: [io 0x0480-0x04bf] pnp 00:09: [mem 0xfed20000-0xfed8ffff] pnp 00:09: [mem 0xffb00000-0xffbfffff] system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x0800-0x087f] has been reserved system 00:09: [io 0x0480-0x04bf] has been reserved system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [mem 0xfec00000-0xfec00fff] pnp 00:0a: [mem 0xfee00000-0xfee00fff] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0x00000000-0x0009ffff] pnp 00:0b: [mem 0x000c0000-0x000dffff] pnp 00:0b: [mem 0x000e0000-0x000fffff] pnp 00:0b: [mem 0x00100000-0x7ffeffff] pnp 00:0b: [mem 0xfff00000-0xffffffff] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0b: [mem 0x00100000-0x7ffeffff] could not be reserved system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff]) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xf7efffff pref] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1e.0: PCI bridge to [bus 03-03] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xf7efffff pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 1, 8192 bytes) UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 16 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 2712k freed highmem bounce pool size: 64 pages SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled msgmni has been set to 1734 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Uniform Multi-Platform E-IDE driver i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 296k freed udevd[371]: starting version 175 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub SCSI subsystem initialized usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800 libata version 3.00 loaded. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e1000 0000:02:01.0: setting latency timer to 64 scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ata1.00: ATA-5: ST380021A, 3.19, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST380021A 3.19 PQ: 0 ANSI: 5 ata2.00: ATAPI: TSSTcorp CDDVDW SH-S202N, SB01, max UDMA/66 ata2.00: configured for UDMA/66 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202N SB01 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sda: sda1 sda2 < sda5 sda6 > sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:11:2f:63:ec:48 e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection usb 2-1: new low speed USB device number 2 using uhci_hcd Refined TSC clocksource calibration: 2792.999 MHz. Switching to clocksource tsc generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550 FW:828.D2.I USB FW:D2] on usb-0000:00:1d.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver XFS (sda3): Mounting Filesystem XFS (sda3): Ending clean mount udevd[579]: starting version 175 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 865 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input4 b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 2 b2c2_flexcop_pci 0000:03:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 DVB: registering new adapter (FlexCop Digital TV device) b2c2-flexcop: MAC address = 00:d0:d7:16:5c:86 CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) CX24123: wrong demod revision: 87 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 b2c2-flexcop: found 'Zarlink MT352 DVB-T' . DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)... b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 snd_intel8x0 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50039 usecs (2412 samples) intel8x0: clocking to 48000 Real Time Clock Driver v1.12b Adding 1001916k swap on /dev/sda6. Priority:-1 extents:1 across:1001916k lirc_dev: IR Remote Control driver registered, major 253 lirc_serial: module is from the staging directory, the quality is unknown, you have been warned. lirc_serial: auto-detected active low receiver lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0 w83627hf: w83627hf: Found W83627THF chip at 0x290 ide-cd driver 5.00 NET: Registered protocol family 10 XFS (sda4): Mounting Filesystem XFS (sda4): Ending clean mount fuse init (API version 7.17) ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.2 input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x1458:0x4054). [drm] register mmio base: 0xFE8F0000 [drm] register mmio size: 65536 agpgart-intel 0000:00:00.0: AGP 3.0 bridge agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode radeon 0000:01:00.0: putting AGP V3 device into 8x mode radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 444170 kiB. [TTM] Zone highmem: Available graphics memory: 1037678 kiB. [TTM] Initializing pool allocator. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 64M of GTT memory ready. radeon 0000:01:00.0: WB disabled [drm] Loading R200 Microcode [drm] radeon: ring at 0x00000000F8001000 [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] DVI-I [drm] HPD1 [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] DFP1: INTERNAL_TMDS1 [drm] Connector 2: [drm] S-video [drm] Encoders: [drm] TV1: INTERNAL_DAC2 [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID [drm] Radeon display connector DVI-I-1: Found valid EDID [drm] fb mappable at 0xE8040000 [drm] vram apper at 0xE8000000 [drm] size 7057408 [drm] fb depth is 24 [drm] pitch is 6720 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 210x65 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 0
Attachment:
signature.asc
Description: Digital signature