Bug#638863: Partially fixed
Hi,
after upgrading to version 3.2.0-1 of the kernel, one of the two error
messages during startup is gone - the corresponding patch by Bjorn Helgaas has
been accepted upstream.
However, the timer error is still present:
$ dmesg | fgrep TCO
[ 11.915459] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 11.915563] SP5100 TCO timer: mmio address 0xfec000f0 already in use
(I attached the full dmesg log)
Bjorn also wrote patches for these, which I attached as well - however, the
upstream discussion about them just stopped at some point, and/or the patches
got lost while kernel.org was down. I do not know how this is usually handled.
Kind regards,
Ralf
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1-amd64 (Debian 3.2.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Sun Feb 5 15:17:15 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=063a7f00-8498-4d36-ba06-e09e819487aa ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000acb70000 (usable)
[ 0.000000] BIOS-e820: 00000000acb70000 - 00000000acb80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000acb80000 - 00000000afd4f000 (usable)
[ 0.000000] BIOS-e820: 00000000afd4f000 - 00000000afdcf000 (reserved)
[ 0.000000] BIOS-e820: 00000000afdcf000 - 00000000afecf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afecf000 - 00000000afeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Hewlett-Packard Compaq 615/308C, BIOS 68GVV Ver. F.0F 12/17/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 4 base 00FFE00000 mask FFFFE00000 write-protect
[ 0.000000] 5 base 00FFF40000 mask FFFFFF0000 write-protect
[ 0.000000] 6 base 00ACB70000 mask FFFFFF0000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000aff00000
[ 0.000000] 0000000000 - 00afe00000 page 2M
[ 0.000000] 00afe00000 - 00aff00000 page 4k
[ 0.000000] kernel direct mapping tables up to aff00000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ afd49000-afd4f000
[ 0.000000] RAMDISK: 36a46000 - 3751b000
[ 0.000000] ACPI: RSDP 00000000000f69a0 00014 (v00 HP )
[ 0.000000] ACPI: RSDT 00000000afefe038 00040 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000afefd000 00074 (v01 HP 0944 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 00000000afee2000 17A07 (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: FACS 00000000afea1000 00040
[ 0.000000] ACPI: APIC 00000000afefc000 00084 (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000afefb000 0003C (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: MSCT 00000000afee0000 0004E (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 00000000afedf000 00038 (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000afede000 002B4 (v01 AMD PowerNow 00000001 AMD 00000001)
[ 0.000000] ACPI: SRAT 00000000afedd000 000A0 (v03 AMD ANT 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-140000000
[ 0.000000] NUMA: Node 0 [0,c0000000) + [100000000,140000000) -> [0,140000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ba00000-ffff88013effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000acb70
[ 0.000000] 0: 0x000acb80 -> 0x000afd4f
[ 0.000000] 0: 0x000afeff -> 0x000aff00
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 982223
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 701816 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000acb70000 - 00000000acb80000
[ 0.000000] PM: Registered nosave memory: 00000000afd4f000 - 00000000afdcf000
[ 0.000000] PM: Registered nosave memory: 00000000afdcf000 - 00000000afecf000
[ 0.000000] PM: Registered nosave memory: 00000000afecf000 - 00000000afeff000
[ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb01000
[ 0.000000] PM: Registered nosave memory: 00000000feb01000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 964298
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-amd64 root=UUID=063a7f00-8498-4d36-ba06-e09e819487aa ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3787484k/5242880k available (3368k kernel code, 1313988k absent, 141408k reserved, 3361k data, 568k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2199.509 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.01 BogoMIPS (lpj=8798036)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004103] Security Framework initialized
[ 0.004110] AppArmor: AppArmor disabled by boot time parameter
[ 0.004549] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007587] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009600] Mount-cache hash table entries: 256
[ 0.009816] Initializing cgroup subsys cpuacct
[ 0.009823] Initializing cgroup subsys memory
[ 0.009845] Initializing cgroup subsys devices
[ 0.009851] Initializing cgroup subsys freezer
[ 0.009854] Initializing cgroup subsys net_cls
[ 0.009857] Initializing cgroup subsys blkio
[ 0.009911] tseg: 00aff00000
[ 0.009914] CPU: Physical Processor ID: 0
[ 0.009916] CPU: Processor Core ID: 0
[ 0.009919] mce: CPU supports 5 MCE banks
[ 0.010460] ACPI: Core revision 20110623
[ 0.020580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061655] CPU0: AMD Athlon(tm)X2 DualCore QL-66 stepping 01
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152008] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.152008] Measured 27224151 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.152008] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.152039] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152068] Brought up 2 CPUs
[ 0.152071] Total of 2 processors activated (8788.08 BogoMIPS).
[ 0.152691] devtmpfs: initialized
[ 0.156630] PM: Registering ACPI NVS region at acb70000 (65536 bytes)
[ 0.156630] PM: Registering ACPI NVS region at afdcf000 (1048576 bytes)
[ 0.156630] print_constraints: dummy:
[ 0.156630] NET: Registered protocol family 16
[ 0.156630] TOM: 00000000c0000000 aka 3072M
[ 0.156630] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.156630] TOM2: 0000000140000000 aka 5120M
[ 0.156688] Extended Config Space enabled on 0 nodes
[ 0.156704] ACPI: bus type pci registered
[ 0.156813] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.156817] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.194011] PCI: Using configuration type 1 for base access
[ 0.194860] bio: create slab <bio-0> at 0
[ 0.194860] ACPI: Added _OSI(Module Device)
[ 0.194860] ACPI: Added _OSI(Processor Device)
[ 0.194860] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.194860] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.196687] ACPI: EC: Look up EC in DSDT
[ 0.348086] ACPI: Interpreter enabled
[ 0.348092] ACPI: (supports S0 S3 S4 S5)
[ 0.348125] ACPI: Using IOAPIC for interrupt routing
[ 0.354098] ACPI: Power Resource [APPR] (off)
[ 0.433786] ACPI: Power Resource [PFN0] (off)
[ 0.433867] ACPI: Power Resource [PFN1] (off)
[ 0.433944] ACPI: Power Resource [PFN2] (off)
[ 0.434020] ACPI: Power Resource [PFN3] (off)
[ 0.436038] ACPI: Power Resource [PFN4] (off)
[ 0.436653] ACPI: Power Resource [PFN6] (off)
[ 0.436731] ACPI: Power Resource [PFN7] (off)
[ 0.436808] ACPI: Power Resource [PFN8] (off)
[ 0.436885] ACPI: Power Resource [PFN9] (off)
[ 0.436961] ACPI: Power Resource [PFNA] (off)
[ 0.437013] ACPI: Power Resource [PGF0] (off)
[ 0.437861] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.438229] ACPI: No dock devices found.
[ 0.438232] HEST: Table not found.
[ 0.438237] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.438370] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.438639] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.438643] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.438646] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.438649] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.438652] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.438654] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.438657] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.438660] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.438663] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.438666] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.438669] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.438671] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.438674] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.438677] pci_root PNP0A03:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.438680] pci_root PNP0A03:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.438683] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.438686] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfffdffff]
[ 0.438689] pci_root PNP0A03:00: host bridge window [mem 0xffe00000-0xffffffff]
[ 0.438694] pci_root PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xffe00000-0xffffffff] ignored
[ 0.438702] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[ 0.438708] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000ec000-0x000effff] (conflicts with reserved [mem 0x000ef000-0x000fffff])
[ 0.438730] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.438821] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
[ 0.438918] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[ 0.438975] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.438980] pci 0000:00:04.0: PME# disabled
[ 0.439040] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
[ 0.439094] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.439098] pci 0000:00:07.0: PME# disabled
[ 0.439157] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.439217] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.439221] pci 0000:00:09.0: PME# disabled
[ 0.439295] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.439320] pci 0000:00:11.0: reg 10: [io 0x6018-0x601f]
[ 0.439332] pci 0000:00:11.0: reg 14: [io 0x6024-0x6027]
[ 0.439345] pci 0000:00:11.0: reg 18: [io 0x6010-0x6017]
[ 0.439357] pci 0000:00:11.0: reg 1c: [io 0x6020-0x6023]
[ 0.439370] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 0.439382] pci 0000:00:11.0: reg 24: [mem 0xd4409000-0xd44093ff]
[ 0.439458] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.439475] pci 0000:00:12.0: reg 10: [mem 0xd4408000-0xd4408fff]
[ 0.439559] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.439577] pci 0000:00:12.1: reg 10: [mem 0xd4407000-0xd4407fff]
[ 0.439668] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.439693] pci 0000:00:12.2: reg 10: [mem 0xd4409500-0xd44095ff]
[ 0.439797] pci 0000:00:12.2: supports D1 D2
[ 0.439800] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.439805] pci 0000:00:12.2: PME# disabled
[ 0.439834] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.439852] pci 0000:00:13.0: reg 10: [mem 0xd4406000-0xd4406fff]
[ 0.439937] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.439954] pci 0000:00:13.1: reg 10: [mem 0xd4405000-0xd4405fff]
[ 0.440068] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.440092] pci 0000:00:13.2: reg 10: [mem 0xd4409400-0xd44094ff]
[ 0.440196] pci 0000:00:13.2: supports D1 D2
[ 0.440199] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.440204] pci 0000:00:13.2: PME# disabled
[ 0.440237] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.440368] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.440396] pci 0000:00:14.2: reg 10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.440479] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.440484] pci 0000:00:14.2: PME# disabled
[ 0.440504] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.440603] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.440663] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.440680] pci 0000:00:14.5: reg 10: [mem 0xd4404000-0xd4404fff]
[ 0.440770] pci 0000:00:18.0: [1022:1300] type 0 class 0x000600
[ 0.440809] pci 0000:00:18.1: [1022:1301] type 0 class 0x000600
[ 0.440839] pci 0000:00:18.2: [1022:1302] type 0 class 0x000600
[ 0.440870] pci 0000:00:18.3: [1022:1303] type 0 class 0x000600
[ 0.440909] pci 0000:00:18.4: [1022:1304] type 0 class 0x000600
[ 0.441018] pci 0000:01:05.0: [1002:9612] type 0 class 0x000300
[ 0.441031] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.441039] pci 0000:01:05.0: reg 14: [io 0x5000-0x50ff]
[ 0.441046] pci 0000:01:05.0: reg 18: [mem 0xd4300000-0xd430ffff]
[ 0.441063] pci 0000:01:05.0: reg 24: [mem 0xd4200000-0xd42fffff]
[ 0.441091] pci 0000:01:05.0: supports D1 D2
[ 0.441173] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.441179] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.441183] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.441188] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.441334] pci 0000:02:00.0: [11ab:4357] type 0 class 0x000200
[ 0.441380] pci 0000:02:00.0: reg 10: [mem 0xd3100000-0xd3103fff 64bit]
[ 0.441394] pci 0000:02:00.0: reg 18: [io 0x3000-0x30ff]
[ 0.441536] pci 0000:02:00.0: supports D1 D2
[ 0.441538] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.441545] pci 0000:02:00.0: PME# disabled
[ 0.448094] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.448100] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.448104] pci 0000:00:04.0: bridge window [mem 0xd3100000-0xd41fffff]
[ 0.448109] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.448147] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.448152] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.448156] pci 0000:00:07.0: bridge window [mem 0xd2100000-0xd30fffff]
[ 0.448161] pci 0000:00:07.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.448296] pci 0000:06:00.0: [14e4:4315] type 0 class 0x000280
[ 0.448318] pci 0000:06:00.0: reg 10: [mem 0xd2000000-0xd2003fff 64bit]
[ 0.448427] pci 0000:06:00.0: supports D1 D2
[ 0.456110] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.456117] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 0.456226] pci 0000:00:14.4: PCI bridge to [bus 80-8f] (subtractive decode)
[ 0.456232] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.456241] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.456244] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.456247] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.456251] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.456254] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.456257] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.456261] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.456264] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.456267] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.456271] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.456274] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.456277] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.456280] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.456284] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.456287] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.456345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.456438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX0._PRT]
[ 0.456499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.456575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB9_._PRT]
[ 0.456643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.456794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.456833] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.456837] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.456840] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.465629] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465692] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465813] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465872] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465932] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.465991] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.466050] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.466355] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.466355] vgaarb: loaded
[ 0.466355] vgaarb: bridge control possible 0000:01:05.0
[ 0.466355] PCI: Using ACPI for IRQ routing
[ 0.477275] PCI: pci_cache_line_size set to 64 bytes
[ 0.477633] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.477636] reserve RAM buffer: 00000000acb70000 - 00000000afffffff
[ 0.477641] reserve RAM buffer: 00000000afd4f000 - 00000000afffffff
[ 0.477645] reserve RAM buffer: 00000000aff00000 - 00000000afffffff
[ 0.477850] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.477856] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.479886] Switching to clocksource hpet
[ 0.482672] pnp: PnP ACPI init
[ 0.482702] ACPI: bus type pnp registered
[ 0.482886] pnp 00:00: [bus 00-ff]
[ 0.482890] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.482893] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.482898] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.482902] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.482905] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.482908] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.482911] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.482913] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.482916] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.482919] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.482922] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.482925] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.482928] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.482931] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.482934] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.482937] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.482940] pnp 00:00: [mem 0xf0000000-0xfffdffff window]
[ 0.482943] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.482946] pnp 00:00: [mem 0xffe00000-0xffffffff]
[ 0.483082] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.483285] pnp 00:01: [io 0x0000-0x000f]
[ 0.483288] pnp 00:01: [io 0x0081-0x008f]
[ 0.483291] pnp 00:01: [io 0x00c0-0x00df]
[ 0.483294] pnp 00:01: [dma 4]
[ 0.483342] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.483354] pnp 00:02: [io 0x00f0-0x00fe]
[ 0.483403] pnp 00:02: [irq 13]
[ 0.483455] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.483467] pnp 00:03: [io 0x0061]
[ 0.483512] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.483572] pnp 00:04: [io 0x0010-0x001f]
[ 0.483575] pnp 00:04: [io 0x002e-0x002f]
[ 0.483577] pnp 00:04: [io 0x004e-0x004f]
[ 0.483580] pnp 00:04: [io 0x0072-0x0073]
[ 0.483583] pnp 00:04: [io 0x0080]
[ 0.483585] pnp 00:04: [io 0x00b0-0x00b1]
[ 0.483589] pnp 00:04: [io 0x0092]
[ 0.483592] pnp 00:04: [io 0x0400-0x04cf]
[ 0.483595] pnp 00:04: [io 0x04d0-0x04d1]
[ 0.483597] pnp 00:04: [io 0x04d6]
[ 0.483600] pnp 00:04: [io 0x0680-0x06ff]
[ 0.483603] pnp 00:04: [io 0x077a]
[ 0.483606] pnp 00:04: [io 0x0c00-0x0c01]
[ 0.483608] pnp 00:04: [io 0x0c14]
[ 0.483611] pnp 00:04: [io 0x0c50-0x0c52]
[ 0.483613] pnp 00:04: [io 0x0c6c]
[ 0.483616] pnp 00:04: [io 0x0c6f]
[ 0.483619] pnp 00:04: [io 0x0cd0-0x0cdb]
[ 0.483621] pnp 00:04: [io 0x0220-0x0227]
[ 0.483624] pnp 00:04: [io 0x0260-0x0273]
[ 0.483627] pnp 00:04: [io 0x0800]
[ 0.483629] pnp 00:04: [io 0x0804]
[ 0.483632] pnp 00:04: [io 0x087f]
[ 0.483635] pnp 00:04: [io 0x0cdc-0x0cdf]
[ 0.483637] pnp 00:04: [io 0x00b8]
[ 0.483640] pnp 00:04: [io 0x0022-0x0023]
[ 0.483643] pnp 00:04: [io 0x0b00-0x0b0f]
[ 0.483645] pnp 00:04: [io 0x0b20-0x0b3f]
[ 0.483648] pnp 00:04: [io 0x0200-0x027f]
[ 0.483767] system 00:04: [io 0x0400-0x04cf] has been reserved
[ 0.483771] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.483774] system 00:04: [io 0x04d6] has been reserved
[ 0.483778] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.483781] system 00:04: [io 0x077a] has been reserved
[ 0.483784] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.483788] system 00:04: [io 0x0c14] has been reserved
[ 0.483791] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.483794] system 00:04: [io 0x0c6c] has been reserved
[ 0.483797] system 00:04: [io 0x0c6f] has been reserved
[ 0.483801] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.483804] system 00:04: [io 0x0220-0x0227] has been reserved
[ 0.483807] system 00:04: [io 0x0260-0x0273] has been reserved
[ 0.483811] system 00:04: [io 0x0800] has been reserved
[ 0.483814] system 00:04: [io 0x0804] has been reserved
[ 0.483817] system 00:04: [io 0x087f] has been reserved
[ 0.483822] system 00:04: [io 0x0cdc-0x0cdf] has been reserved
[ 0.483826] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 0.483830] system 00:04: [io 0x0b20-0x0b3f] has been reserved
[ 0.483833] system 00:04: [io 0x0200-0x027f] could not be reserved
[ 0.483837] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.483893] pnp 00:05: [mem 0x00000000-0x0009ffff]
[ 0.483896] pnp 00:05: [mem 0x000ec000-0x000fffff]
[ 0.483899] pnp 00:05: [mem 0x00100000-0xbfffffff]
[ 0.483902] pnp 00:05: [mem 0xe0000000-0xefffffff]
[ 0.483904] pnp 00:05: [mem 0xfeb00000-0xfeb00fff]
[ 0.483907] pnp 00:05: [mem 0xfec00000-0xfec00fff]
[ 0.483909] pnp 00:05: [mem 0xfee00000-0xfee00fff]
[ 0.483923] pnp 00:05: [mem 0xffe00000-0xffffffff]
[ 0.484045] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.484050] system 00:05: [mem 0x000ec000-0x000fffff] could not be reserved
[ 0.484053] system 00:05: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.484057] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.484061] system 00:05: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.484064] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.484068] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.484072] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.484075] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.484144] pnp 00:06: [io 0x0070-0x0071]
[ 0.484150] pnp 00:06: [irq 8]
[ 0.484204] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.484326] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.484375] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.484414] pnp 00:08: [io 0x0060]
[ 0.484417] pnp 00:08: [io 0x0064]
[ 0.484456] pnp 00:08: [irq 1]
[ 0.484511] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.484560] pnp 00:09: [irq 12]
[ 0.484614] pnp 00:09: Plug and Play ACPI device, IDs SYN0159 SYN0100 SYN0002 PNP0f13 (active)
[ 0.485596] pnp: PnP ACPI: found 10 devices
[ 0.485599] ACPI: ACPI bus type pnp unregistered
[ 0.494442] PCI: max bus depth: 1 pci_try_num: 2
[ 0.494519] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.494523] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.494528] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.494533] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.494539] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.494543] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 0.494547] pci 0000:00:04.0: bridge window [mem 0xd3100000-0xd41fffff]
[ 0.494552] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.494557] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 0.494561] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.494565] pci 0000:00:07.0: bridge window [mem 0xd2100000-0xd30fffff]
[ 0.494570] pci 0000:00:07.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.494575] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.494580] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 0.494587] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[ 0.494625] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 0.494649] pci 0000:00:01.0: setting latency timer to 64
[ 0.494657] pci 0000:00:04.0: setting latency timer to 64
[ 0.494663] pci 0000:00:07.0: setting latency timer to 64
[ 0.494670] pci 0000:00:09.0: setting latency timer to 64
[ 0.494680] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.494683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.494686] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.494689] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.494692] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.494695] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.494698] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.494701] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.494704] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.494707] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.494709] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.494712] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.494715] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.494718] pci_bus 0000:00: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.494721] pci_bus 0000:00: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.494724] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.494727] pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
[ 0.494730] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.494734] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.494736] pci_bus 0000:02: resource 1 [mem 0xd3100000-0xd41fffff]
[ 0.494739] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.494743] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.494746] pci_bus 0000:03: resource 1 [mem 0xd2100000-0xd30fffff]
[ 0.494749] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.494752] pci_bus 0000:06: resource 1 [mem 0xd2000000-0xd20fffff]
[ 0.494755] pci_bus 0000:80: resource 0 [io 0x1000-0x1fff]
[ 0.494758] pci_bus 0000:80: resource 4 [io 0x0000-0x0cf7]
[ 0.494761] pci_bus 0000:80: resource 5 [io 0x0d00-0xffff]
[ 0.494764] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.494766] pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.494769] pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.494772] pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.494775] pci_bus 0000:80: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.494778] pci_bus 0000:80: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.494781] pci_bus 0000:80: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.494784] pci_bus 0000:80: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.494787] pci_bus 0000:80: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.494790] pci_bus 0000:80: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.494793] pci_bus 0000:80: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.494796] pci_bus 0000:80: resource 17 [mem 0xc0000000-0xdfffffff]
[ 0.494799] pci_bus 0000:80: resource 18 [mem 0xf0000000-0xffffffff]
[ 0.494937] NET: Registered protocol family 2
[ 0.495177] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.497227] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.502421] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.503046] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.503049] TCP reno registered
[ 0.503069] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.503125] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.503390] NET: Registered protocol family 1
[ 0.503407] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.724084] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.780069] pci 0000:01:05.0: Boot video device
[ 0.780158] Unpacking initramfs...
[ 1.096811] Freeing initrd memory: 11092k freed
[ 1.105080] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.105086] Placing 64MB software IO TLB between ffff8800a8b70000 - ffff8800acb70000
[ 1.105089] software IO TLB at phys 0xa8b70000 - 0xacb70000
[ 1.105934] audit: initializing netlink socket (disabled)
[ 1.105952] type=2000 audit(1329208617.104:1): initialized
[ 1.138277] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.173077] VFS: Disk quotas dquot_6.5.2
[ 1.173157] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.173296] msgmni has been set to 7419
[ 1.173612] alg: No test for stdrng (krng)
[ 1.173674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.173681] io scheduler noop registered
[ 1.173683] io scheduler deadline registered
[ 1.173744] io scheduler cfq registered (default)
[ 1.173895] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.173946] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 1.174020] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.174056] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.174130] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.174168] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[ 1.174457] ERST: Table is not found!
[ 1.174459] GHES: HEST is not enabled!
[ 1.174600] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.220872] Linux agpgart interface v0.103
[ 1.221049] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.222961] i8042: Detected active multiplexing controller, rev 1.1
[ 1.223980] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.224018] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.224064] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.224100] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.224136] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.224360] mousedev: PS/2 mouse device common for all mice
[ 1.224458] rtc_cmos 00:06: RTC can wake from S4
[ 1.224600] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.224632] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.224646] cpuidle: using governor ladder
[ 1.224648] cpuidle: using governor menu
[ 1.224929] TCP cubic registered
[ 1.225038] NET: Registered protocol family 10
[ 1.225667] Mobile IPv6
[ 1.225670] NET: Registered protocol family 17
[ 1.225675] Registering the dns_resolver key type
[ 1.225914] PM: Hibernation image not present or could not be loaded.
[ 1.225928] registered taskstats version 1
[ 1.243731] rtc_cmos 00:06: setting system clock to 2012-02-14 08:36:57 UTC (1329208617)
[ 1.243815] Initializing network drop monitor service
[ 1.245215] Freeing unused kernel memory: 568k freed
[ 1.245527] Write protecting the kernel read-only data: 6144k
[ 1.249032] Freeing unused kernel memory: 712k freed
[ 1.252787] Freeing unused kernel memory: 684k freed
[ 1.263499] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.360412] udevd[52]: starting version 175
[ 1.419722] sky2: driver version 1.30
[ 1.419859] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.419912] sky2 0000:02:00.0: setting latency timer to 64
[ 1.420079] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
[ 1.433590] usbcore: registered new interface driver usbfs
[ 1.433626] usbcore: registered new interface driver hub
[ 1.438761] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.439359] usbcore: registered new device driver usb
[ 1.439443] sky2 0000:02:00.0: eth0: addr d8:d3:85:1c:55:54
[ 1.440292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.440381] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.440411] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.440416] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.440450] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.440502] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.440541] QUIRK: Enable AMD PLL fix
[ 1.440545] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.440603] ehci_hcd 0000:00:12.2: debug port 1
[ 1.440635] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd4409500
[ 1.442004] SCSI subsystem initialized
[ 1.445764] b43-pci-bridge 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.445781] b43-pci-bridge 0000:06:00.0: setting latency timer to 64
[ 1.452175] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.452222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.452225] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452228] usb usb1: Product: EHCI Host Controller
[ 1.452231] usb usb1: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd
[ 1.452233] usb usb1: SerialNumber: 0000:00:12.2
[ 1.452468] hub 1-0:1.0: USB hub found
[ 1.452477] hub 1-0:1.0: 6 ports detected
[ 1.452676] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.452763] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 1.452767] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.452781] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.452793] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.452821] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.452837] ehci_hcd 0000:00:13.2: debug port 1
[ 1.452871] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4409400
[ 1.458076] libata version 3.00 loaded.
[ 1.464056] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.464129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.464132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.464135] usb usb2: Product: EHCI Host Controller
[ 1.464138] usb usb2: Manufacturer: Linux 3.2.0-1-amd64 ehci_hcd
[ 1.464140] usb usb2: SerialNumber: 0000:00:13.2
[ 1.464304] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 1.464318] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 1.464326] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 1.464333] hub 2-0:1.0: USB hub found
[ 1.464336] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 1.464345] hub 2-0:1.0: 6 ports detected
[ 1.465511] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.465577] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.465609] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.465614] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.465632] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.465682] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd4408000
[ 1.492401] ACPI: Fan [FAN0] (off)
[ 1.492484] ACPI: Fan [FAN1] (off)
[ 1.492550] ACPI: Fan [FAN2] (off)
[ 1.492616] ACPI: Fan [FAN3] (off)
[ 1.492681] ACPI: Fan [FAN4] (off)
[ 1.492749] ACPI: Fan [FAN6] (off)
[ 1.492812] ACPI: Fan [FAN7] (off)
[ 1.492875] ACPI: Fan [FAN8] (off)
[ 1.492940] ACPI: Fan [FAN9] (off)
[ 1.493003] ACPI: Fan [FANA] (off)
[ 1.493047] ACPI: Fan [FANG] (off)
[ 1.514227] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.514232] ACPI: Thermal Zone [CPUZ] (43 C)
[ 1.515617] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.515620] ACPI: Thermal Zone [GFXZ] (30 C)
[ 1.520787] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
[ 1.524655] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.524661] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.524664] usb usb3: Product: OHCI Host Controller
[ 1.524667] usb usb3: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.524669] usb usb3: SerialNumber: 0000:00:12.0
[ 1.524856] hub 3-0:1.0: USB hub found
[ 1.524899] hub 3-0:1.0: 3 ports detected
[ 1.525006] ahci 0000:00:11.0: version 3.0
[ 1.525074] ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.525215] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.525220] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio ccc
[ 1.535537] scsi0 : ahci
[ 1.537780] scsi1 : ahci
[ 1.537968] ata1: SATA max UDMA/133 abar m1024@0xd4409000 port 0xd4409100 irq 20
[ 1.537973] ata2: SATA max UDMA/133 abar m1024@0xd4409000 port 0xd4409180 irq 20
[ 1.538109] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.538191] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 1.538196] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.538214] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.538250] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd4407000
[ 1.596107] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.596112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.596115] usb usb4: Product: OHCI Host Controller
[ 1.596118] usb usb4: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.596120] usb usb4: SerialNumber: 0000:00:12.1
[ 1.596345] hub 4-0:1.0: USB hub found
[ 1.596354] hub 4-0:1.0: 3 ports detected
[ 1.596512] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.596594] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.596598] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.596610] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.596639] ohci_hcd 0000:00:13.0: irq 17, io mem 0xd4406000
[ 1.656092] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.656098] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.656101] usb usb5: Product: OHCI Host Controller
[ 1.656103] usb usb5: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.656106] usb usb5: SerialNumber: 0000:00:13.0
[ 1.656295] hub 5-0:1.0: USB hub found
[ 1.656307] hub 5-0:1.0: 3 ports detected
[ 1.656420] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.656501] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 1.656505] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.656517] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.656550] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd4405000
[ 1.716065] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.716068] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.716071] usb usb6: Product: OHCI Host Controller
[ 1.716073] usb usb6: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.716076] usb usb6: SerialNumber: 0000:00:13.1
[ 1.716215] hub 6-0:1.0: USB hub found
[ 1.716223] hub 6-0:1.0: 3 ports detected
[ 1.716355] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.716372] ohci_hcd 0000:00:14.5: setting latency timer to 64
[ 1.716376] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.716385] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.716417] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd4404000
[ 1.764068] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.776063] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.776066] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.776069] usb usb7: Product: OHCI Host Controller
[ 1.776072] usb usb7: Manufacturer: Linux 3.2.0-1-amd64 ohci_hcd
[ 1.776074] usb usb7: SerialNumber: 0000:00:14.5
[ 1.776214] hub 7-0:1.0: USB hub found
[ 1.776221] hub 7-0:1.0: 2 ports detected
[ 1.860119] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.862429] ata1.00: ATA-8: WDC WD3200BEKT-60V5T1, 12.01A12, max UDMA/100
[ 1.862433] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.864081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.864760] ata1.00: configured for UDMA/100
[ 1.865057] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 12.0 PQ: 0 ANSI: 5
[ 1.877098] ata2.00: ATAPI: hp DVD RW AD-7581S, 4H73, max UDMA/100
[ 1.890673] ata2.00: configured for UDMA/100
[ 1.894227] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7581S 4H73 PQ: 0 ANSI: 5
[ 1.897489] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
[ 1.897495] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.898586] hub 1-1:1.0: USB hub found
[ 1.898724] hub 1-1:1.0: 4 ports detected
[ 1.905045] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.905192] sd 0:0:0:0: [sda] Write Protect is off
[ 1.905198] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.905247] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.907373] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.907377] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.907528] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.953010] sda: sda1 sda2 sda3 < sda5 >
[ 1.953648] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.008091] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 2.179568] usb 2-2: New USB device found, idVendor=04f2, idProduct=b159
[ 2.179574] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.179578] usb 2-2: Product: CNF8243
[ 2.179580] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.179582] usb 2-2: SerialNumber: SN0001
[ 2.515250] PM: Starting manual resume from disk
[ 2.515257] PM: Hibernation image partition 8:2 present
[ 2.515259] PM: Looking for hibernation image.
[ 2.515661] PM: Image not found (code -22)
[ 2.515667] PM: Hibernation image not present or could not be loaded.
[ 2.521335] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.521343] PM: Marking nosave pages: 00000000acb70000 - 00000000acb80000
[ 2.521347] PM: Marking nosave pages: 00000000afd4f000 - 00000000afeff000
[ 2.521357] PM: Marking nosave pages: 00000000aff00000 - 0000000100000000
[ 2.523000] PM: Basic memory bitmaps created
[ 2.543006] PM: Basic memory bitmaps freed
[ 2.556089] usb 6-3: new full-speed USB device number 2 using ohci_hcd
[ 2.585687] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.729113] usb 6-3: New USB device found, idVendor=03f0, idProduct=231d
[ 2.729119] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.729122] usb 6-3: Product: HP Integrated Module
[ 2.729124] usb 6-3: Manufacturer: Broadcom Corp
[ 2.816641] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.935253] usb 1-1.2: New USB device found, idVendor=046a, idProduct=0023
[ 2.935259] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.024745] usb 1-1.3: new low-speed USB device number 4 using ehci_hcd
[ 3.137599] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c069
[ 3.137605] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.137609] usb 1-1.3: Product: USB Laser Mouse
[ 3.137611] usb 1-1.3: Manufacturer: Logitech
[ 10.765548] udevd[334]: starting version 175
[ 11.355338] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 11.355348] ACPI: Sleep Button [SLPB]
[ 11.355430] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 11.355510] ACPI: Lid Switch [LID]
[ 11.355602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 11.355607] ACPI: Power Button [PWRF]
[ 11.377430] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.468379] acpi device:02: registered as cooling_device13
[ 11.468900] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input4
[ 11.468908] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
[ 11.482047] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 11.482325] ACPI: Battery Slot [BAT0] (battery present)
[ 11.483105] wmi: Mapper loaded
[ 11.490741] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 11.554372] ACPI: AC Adapter [AC] (on-line)
[ 11.587610] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.628608] cfg80211: Calling CRDA to update world regulatory domain
[ 11.792246] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 11.915459] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 11.915563] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 11.975530] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 12.008443] cfg80211: World regulatory domain updated:
[ 12.008449] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.008453] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.008456] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.008459] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.008462] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.008465] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.096567] Disabling lock debugging due to kernel taint
[ 12.096600] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 12.096969] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.097582] Registered led device: b43-phy0::tx
[ 12.097610] Registered led device: b43-phy0::rx
[ 12.097633] Registered led device: b43-phy0::radio
[ 12.097654] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 12.300406] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 12.342772] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 12.347624] [fglrx] Maximum main memory to use for locked dma buffers: 3553 MBytes.
[ 12.347723] [fglrx] vendor: 1002 device: 9612 count: 1
[ 12.348375] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
[ 12.348393] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.348399] pci 0000:01:05.0: setting latency timer to 64
[ 12.348914] [fglrx] Kernel PAT support is enabled
[ 12.348944] [fglrx] module loaded - fglrx 8.93.4 [Dec 5 2011] with 1 minors
[ 12.660121] Bluetooth: Core ver 2.16
[ 12.660212] NET: Registered protocol family 31
[ 12.660215] Bluetooth: HCI device and connection manager initialized
[ 12.660220] Bluetooth: HCI socket layer initialized
[ 12.660223] Bluetooth: L2CAP socket layer initialized
[ 12.660236] Bluetooth: SCO socket layer initialized
[ 12.692609] Linux media interface: v0.10
[ 12.714588] Linux video capture interface: v2.00
[ 12.729977] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.828717] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0/input/input8
[ 12.829034] generic-usb 0003:046D:C069.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.2-1.3/input0
[ 12.829137] usbcore: registered new interface driver usbhid
[ 12.829140] usbhid: USB HID core driver
[ 12.865410] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input9
[ 12.865550] cherry 0003:046A:0023.0001: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:12.2-1.2/input0
[ 12.875433] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 12.875973] input: HID 046a:0023 as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2:1.1/input/input10
[ 12.876173] cherry 0003:046A:0023.0002: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:12.2-1.2/input1
[ 12.924589] usbcore: registered new interface driver btusb
[ 12.933007] input: CNF8243 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input11
[ 12.933119] usbcore: registered new interface driver uvcvideo
[ 12.933121] USB Video Class driver (1.1.1)
[ 13.108168] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0
[ 13.108181] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0
[ 13.108192] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.193014] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12
[ 13.208246] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 13.208382] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 13.768215] hp_wmi: Unknown event_id - 0 - 0x0
[ 13.768256] hp_wmi: Unknown event_id - 0 - 0x0
[ 13.853750] Adding 4095996k swap on /dev/sda2. Priority:-1 extents:1 across:4095996k
[ 13.861168] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 13.955218] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.068983] device-mapper: uevent: version 1.0.3
[ 14.069095] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 34.606981] Intel AES-NI instructions are not detected.
[ 34.678034] padlock_sha: VIA PadLock Hash Engine not detected.
[ 35.189703] loop: module loaded
[ 35.743342] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 36.373508] fuse init (API version 7.17)
[ 37.880468] sky2 0000:02:00.0: eth0: enabling interface
[ 37.881324] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.280138] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 38.681366] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 38.801743] [fglrx] GART Table is not in FRAME_BUFFER range
[ 38.802120] [fglrx] Could not enable MSI; System prevented initialization
[ 38.802750] [fglrx] Firegl kernel thread PID: 1666
[ 38.802912] [fglrx] Firegl kernel thread PID: 1667
[ 38.802987] [fglrx] Firegl kernel thread PID: 1668
[ 38.803154] [fglrx] IRQ 18 Enabled
[ 39.090090] [fglrx] Gart USWC size:1160 M.
[ 39.090096] [fglrx] Gart cacheable size:459 M.
[ 39.090102] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 39.090105] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 39.815371] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 43.781444] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.782311] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 43.854167] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 43.854171] Bluetooth: BNEP filters: protocol multicast
[ 43.883302] Bluetooth: RFCOMM TTY layer initialized
[ 43.883310] Bluetooth: RFCOMM socket layer initialized
[ 43.883313] Bluetooth: RFCOMM ver 1.11
[ 44.137597] lp: driver loaded but no devices found
[ 44.164509] ppdev: user-space parallel port driver
[ 47.690898] powernow-k8: Found 1 AMD Athlon(tm)X2 DualCore QL-66 (2 cpu cores) (version 2.20.00)
[ 47.691164] powernow-k8: 0 : pstate 0 (2200 MHz)
[ 47.691166] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 48.294268] vboxdrv: Found 2 processor cores.
[ 48.294629] vboxdrv: fAsync=1 offMin=0x19f5417 offMax=0x19f5417
[ 48.294782] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 48.294784] vboxdrv: Successfully loaded version 4.1.8_Debian (interface 0x00190000).
[ 48.621790] vboxpci: IOMMU not found (not registered)
From eb3a3d7bb1e0a020f2611395b35ad1bfb378e0d2 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bhelgaas at>
Date: Thu, 25 Aug 2011 23:05:39 +0000
Subject: [PATCH 1/2] x86, ioapic: Reserve only 128 bytes for IOAPICs
Previously we reserved 1024 bytes, but that's more space than the IOAPIC
consumes, and it can cause conflicts with nearby devices. The known
requirement is 68 bytes (sizeof(struct io_apic)), and rounding up to a
power-of-2 gives us 128.
The bug reported below is caused by the following assignments (the IOAPIC
power-on default and the watchdog address recommended in the AMD SP5100
BIOS Developer's Guide):
IOAPIC[0] at [mem 0xfec00000-0xfec003ff]
SP5100 TCO timer at [mem 0xfec000f0-0xfec000f7]
Reported-by: Ralf Jung ralfjung-e <at> gmx.de
Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863
Cc: Cyrill Gorcunov <gorcunov <at> openvz.org>
Cc: Yinghai Lu <yinghai <at> kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas <at> google.com>
---
arch/x86/include/asm/apicdef.h | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 3925d80..b8ee286 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -12,10 +12,11 @@
#define APIC_DEFAULT_PHYS_BASE 0xfee00000
/*
- * This is the IO-APIC register space as specified
- * by Intel docs:
+ * I/O APICs are accessed indirectly via an index/data pair and an EOI
+ * register. For example, see sec 13.5.1, "APIC Register Map," in the
+ * Intel ICH10 datasheet and the struct io_apic definition.
*/
-#define IO_APIC_SLOT_SIZE 1024
+#define IO_APIC_SLOT_SIZE 128
#define APIC_ID 0x20
--
1.7.9
From 3c6f4d287e34f664c54e98f6e2afef811523039b Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bhelgaas at>
Date: Thu, 25 Aug 2011 23:05:45 +0000
Subject: [PATCH 2/2] x86, ioapic: Announce resources reserved for IOAPICs
Delay the IOAPIC output a bit so we can print the actual resources we
reserve.
Signed-off-by: Bjorn Helgaas <bhelgaas <at> google.com>
---
arch/x86/kernel/apic/io_apic.c | 13 ++++++++-----
1 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 6d939d7..4d74b88 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3871,6 +3871,7 @@ void __init ioapic_and_gsi_init(void)
{
unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
struct resource *ioapic_res;
+ struct mp_ioapic_gsi *gsi_cfg;
int i;
ioapic_res = ioapic_setup_resources(nr_ioapics);
@@ -3903,6 +3904,13 @@ fake_ioapic_page:
ioapic_res->start = ioapic_phys;
ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1;
+
+ gsi_cfg = mp_ioapic_gsi_routing(i);
+
+ printk(KERN_INFO "IOAPIC[%d]: id %d v%d %pR GSI %d-%d\n",
+ i, mpc_ioapic_id(i), mpc_ioapic_ver(i), ioapic_res,
+ gsi_cfg->gsi_base, gsi_cfg->gsi_end);
+
ioapic_res++;
}
@@ -4011,11 +4019,6 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
if (gsi_cfg->gsi_end >= gsi_top)
gsi_top = gsi_cfg->gsi_end + 1;
- printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
- "GSI %d-%d\n", idx, mpc_ioapic_id(idx),
- mpc_ioapic_ver(idx), mpc_ioapic_addr(idx),
- gsi_cfg->gsi_base, gsi_cfg->gsi_end);
-
nr_ioapics++;
}
--
1.7.9
Reply to: