Your message dated Sat, 11 Feb 2012 14:09:01 -0600 with message-id <20120211200901.GH6944@burratino> and subject line Re: (Solved) Re: brcmsmac: "firmware bug" warning when connecting, hang when unloading brcmsmac driver unless near AP has caused the Debian Bug report #637240, regarding [regression] Compaq Mini CQ10 hangs after soft reset to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 637240: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637240 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.0.0-1-686-pae: Several problems after updating to kernel 3.0
- From: Camaleón <noelamac@gmail.com>
- Date: Tue, 09 Aug 2011 21:59:15 +0200
- Message-id: <20110809195915.2540.57743.reportbug@stt300.linux.site>
Package: linux-2.6 Version: 3.0.0-1 Severity: important Tags: wheezy After updating to latest kernel I faced these problems: 1. NetworkManager seems non-operative (meaning that no wireless network is available anymore) 2. System hangs at rebooting, which requires me to hard reset the computer I am attaching full dmesg and an image for the hanging at reboot. This is a Compaq Mini CQ10 netbook (Atom). This system is currently running 2.6.39 kernel. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information not available ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at 94180000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 30c0 [size=8] Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at 94000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at 94100000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at 94200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 93000000-93ffffff Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 92000000-92ffffff Prefetchable memory behind bridge: 0000000091000000-0000000091ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 3080 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 3060 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 3040 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 3020 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at 94204400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at 30b8 [size=8] Region 1: I/O ports at 30cc [size=4] Region 2: I/O ports at 30b0 [size=8] Region 3: I/O ports at 30c8 [size=4] Region 4: I/O ports at 30a0 [size=16] Region 5: Memory at 94204000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 3000 [size=32] Kernel driver in use: i801_smbus 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at 90004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at 90000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 01:00.1 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5288] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at 93000000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:145c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at 92000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1122 Syntek -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.39-2-686-pae (SMP w/2 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.3 Linux image base package ii module-init-tools 3.16-1 tools for managing Linux kernel mo Versions of packages linux-image-3.0.0-1-686-pae recommends: ii firmware-linux-free 3 Binary firmware for various driver ii libc6-i686 2.13-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-3.0.0-1-686-pae suggests: ii grub-pc 1.99-9 GRand Unified Bootloader, version pn linux-doc-3.0.0 <none> (no description available) Versions of packages linux-image-3.0.0-1-686-pae is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) ii firmware-ralink 0.33 Binary firmware for Ralink wireles pn xen-hypervisor <none> (no description available) -- debconf information excludedAttachment: reboot_hangs.JPG
Description: JPEG image[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-1-686-pae (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-3) ) #1 SMP Sun Jul 24 14:27:32 UTC 2011 [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f43f000 (usable) [ 0.000000] BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved) [ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5f7000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f5f7000 - 000000007f600000 (usable) [ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Hewlett-Packard Compaq Mini CQ10-500 /148A, BIOS F.14 11/12/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask 0FFE00000 write-protect [ 0.000000] 1 base 000000000 mask 0C0000000 write-back [ 0.000000] 2 base 040000000 mask 0C0000000 write-back [ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 37b6a000 - 37dad000 [ 0.000000] Allocated new RAMDISK: 377bb000 - 379fd217 [ 0.000000] Move RAMDISK from 0000000037b6a000 - 0000000037dac216 to 377bb000 - 379fd216 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 7f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 7f5f5000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 7f5e6000 0BA96 (v01 HP SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: FACS 7f589000 00040 [ 0.000000] ACPI: HPET 7f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 7f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 7f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 7f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: BOOT 7f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 7f5e3000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7f5e2000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7f5e1000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117) [ 0.000000] ACPI: WDAT 7f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1148MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007f600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f43f [ 0.000000] 0: 0x0007f5f7 -> 0x0007f600 [ 0.000000] On node 0 totalpages: 521175 [ 0.000000] free_area_init_node: node 0, pgdat c141c980, node_mem_map f67ca200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2297 pages used for memmap [ 0.000000] HighMem zone: 291153 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s28864 r0 d24384 u524288 [ 0.000000] pcpu-alloc: s28864 r0 d24384 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517098 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f600) [ 0.000000] Memory: 2059732k/2086912k available (2764k kernel code, 24968k reserved, 1474k data, 404k init, 1173800k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc1424000 - 0xc1489000 ( 404 kB) [ 0.000000] .data : 0xc12b326c - 0xc1423b80 (1474 kB) [ 0.000000] .text : 0xc1000000 - 0xc12b326c (2764 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:1280 [ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.409 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.81 BogoMIPS (lpj=6649636) [ 0.004016] pid_max: default: 32768 minimum: 301 [ 0.004125] Security Framework initialized [ 0.004133] SELinux: Disabled at boot. [ 0.004183] Mount-cache hash table entries: 512 [ 0.008012] Initializing cgroup subsys cpuacct [ 0.008062] Initializing cgroup subsys memory [ 0.008093] Initializing cgroup subsys devices [ 0.008099] Initializing cgroup subsys freezer [ 0.008104] Initializing cgroup subsys net_cls [ 0.008109] Initializing cgroup subsys blkio [ 0.008171] Disabled fast string operations [ 0.008180] CPU: Physical Processor ID: 0 [ 0.008184] CPU: Processor Core ID: 0 [ 0.008189] mce: CPU supports 5 MCE banks [ 0.008201] CPU0: Thermal monitoring handled by SMI [ 0.008208] using mwait in idle threads. [ 0.008723] ACPI: Core revision 20110413 [ 0.024112] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067543] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a [ 0.068003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.068003] ... version: 3 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 000000007fffffff [ 0.068003] ... fixed-purpose events: 3 [ 0.068003] ... event mask: 0000000700000003 [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] CPU 1 irqstacks, hard=f60f4000 soft=f60f6000 [ 0.068003] Booting Node 0, Processors #1 [ 0.068003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.008000] Disabled fast string operations [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.160062] NMI watchdog enabled, takes one hw-pmu counter. [ 0.160138] Brought up 2 CPUs [ 0.160146] Total of 2 processors activated (6650.14 BogoMIPS). [ 0.160876] devtmpfs: initialized [ 0.160876] PM: Registering ACPI NVS region at 7f4bf000 (1048576 bytes) [ 0.160876] print_constraints: dummy: [ 0.160876] NET: Registered protocol family 16 [ 0.160924] ACPI: bus type pci registered [ 0.161193] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.161202] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.161206] PCI: Using MMCONFIG for extended config space [ 0.161211] PCI: Using configuration type 1 for base access [ 0.164147] bio: create slab <bio-0> at 0 [ 0.167193] ACPI: EC: Look up EC in DSDT [ 0.170626] ACPI: Executed 1 blocks of module-level executable AML code [ 0.175005] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.175994] ACPI: SSDT 7f494c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.176812] ACPI: Dynamic OEM Table Load: [ 0.176820] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.177120] ACPI: SSDT 7f493e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.177873] ACPI: Dynamic OEM Table Load: [ 0.177880] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.200644] ACPI: SSDT 7f494f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.201428] ACPI: Dynamic OEM Table Load: [ 0.201435] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.201712] ACPI: SSDT 7f492f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.202466] ACPI: Dynamic OEM Table Load: [ 0.202473] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 1.028509] ACPI: Interpreter enabled [ 1.028521] ACPI: (supports S0 S3 S4 S5) [ 1.028596] ACPI: Using IOAPIC for interrupt routing [ 1.042927] ACPI: Power Resource [FN00] (on) [ 1.043693] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 1.044090] ACPI: No dock devices found. [ 1.044096] HEST: Table not found. [ 1.044105] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.045101] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-352) [ 1.045120] \_SB_.PCI0:_OSC evaluation returned wrong type [ 1.045124] _OSC request data:1 8 1f [ 1.045135] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.046816] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.046824] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.046831] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.046839] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 1.046866] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600 [ 1.046928] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300 [ 1.046944] pci 0000:00:02.0: reg 10: [mem 0x94180000-0x941fffff] [ 1.046954] pci 0000:00:02.0: reg 14: [io 0x30c0-0x30c7] [ 1.046965] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref] [ 1.046975] pci 0000:00:02.0: reg 1c: [mem 0x94000000-0x940fffff] [ 1.047021] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380 [ 1.047035] pci 0000:00:02.1: reg 10: [mem 0x94100000-0x9417ffff] [ 1.047145] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 1.047172] pci 0000:00:1b.0: reg 10: [mem 0x94200000-0x94203fff 64bit] [ 1.047261] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.047270] pci 0000:00:1b.0: PME# disabled [ 1.047308] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 1.047398] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.047406] pci 0000:00:1c.0: PME# disabled [ 1.047445] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 1.047536] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.047544] pci 0000:00:1c.1: PME# disabled [ 1.047589] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 1.047650] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] [ 1.047704] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 1.047766] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] [ 1.047817] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 1.047878] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] [ 1.047932] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 1.048000] pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f] [ 1.048080] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 1.048769] pci 0000:00:1d.7: reg 10: [mem 0x94204400-0x942047ff] [ 1.052758] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.052768] pci 0000:00:1d.7: PME# disabled [ 1.052804] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 1.052902] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601 [ 1.053067] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106 [ 1.053093] pci 0000:00:1f.2: reg 10: [io 0x30b8-0x30bf] [ 1.053108] pci 0000:00:1f.2: reg 14: [io 0x30cc-0x30cf] [ 1.053122] pci 0000:00:1f.2: reg 18: [io 0x30b0-0x30b7] [ 1.053137] pci 0000:00:1f.2: reg 1c: [io 0x30c8-0x30cb] [ 1.053151] pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af] [ 1.053168] pci 0000:00:1f.2: reg 24: [mem 0x94204000-0x942043ff] [ 1.053214] pci 0000:00:1f.2: PME# supported from D3hot [ 1.053222] pci 0000:00:1f.2: PME# disabled [ 1.053250] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 1.053326] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] [ 1.053511] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200 [ 1.053580] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff] [ 1.053693] pci 0000:01:00.0: reg 18: [mem 0x90004000-0x90004fff 64bit pref] [ 1.053769] pci 0000:01:00.0: reg 20: [mem 0x90000000-0x90003fff 64bit pref] [ 1.053973] pci 0000:01:00.0: supports D1 D2 [ 1.053979] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.053997] pci 0000:01:00.0: PME# disabled [ 1.054176] pci 0000:01:00.1: [10ec:5288] type 0 class 0x00ff00 [ 1.054245] pci 0000:01:00.1: reg 10: [mem 0x93000000-0x9300ffff] [ 1.054647] pci 0000:01:00.1: supports D1 D2 [ 1.054653] pci 0000:01:00.1: PME# supported from D1 D2 D3hot D3cold [ 1.054670] pci 0000:01:00.1: PME# disabled [ 1.054891] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.054900] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.054909] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] [ 1.054921] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 1.055031] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280 [ 1.055080] pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92003fff 64bit] [ 1.055263] pci 0000:02:00.0: supports D1 D2 [ 1.055366] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.055374] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 1.055383] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] [ 1.055394] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 1.055492] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 1.055501] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.055510] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.055523] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.055530] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.055536] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.055543] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.055550] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 1.055577] pci_bus 0000:00: on NUMA node 0 [ 1.055585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.055919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 1.056189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 1.056336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 1.056676] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-352) [ 1.056694] \_SB_.PCI0:_OSC evaluation returned wrong type [ 1.056698] _OSC request data:1 1f 1f [ 1.056709] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.056856] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-352) [ 1.056873] \_SB_.PCI0:_OSC evaluation returned wrong type [ 1.056877] _OSC request data:1 0 1d [ 1.056887] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d [ 1.056891] ACPI _OSC control for PCIe not granted, disabling ASPM [ 1.063749] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 1.063904] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 1.064077] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 1.064232] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 1.064384] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 1.064537] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 1.064694] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 1.064849] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 1.065117] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.065139] vgaarb: loaded [ 1.065143] vgaarb: bridge control possible 0000:00:02.0 [ 1.065241] PCI: Using ACPI for IRQ routing [ 1.074158] PCI: pci_cache_line_size set to 64 bytes [ 1.074299] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 1.074306] reserve RAM buffer: 000000007f43f000 - 000000007fffffff [ 1.074313] reserve RAM buffer: 000000007f600000 - 000000007fffffff [ 1.074592] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.074609] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.074620] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.080113] Switching to clocksource hpet [ 1.083062] pnp: PnP ACPI init [ 1.083099] ACPI: bus type pnp registered [ 1.083868] Switched to NOHz mode on CPU #0 [ 1.084002] Switched to NOHz mode on CPU #1 [ 1.084909] pnp 00:00: [bus 00-ff] [ 1.084917] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.084923] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.084929] pnp 00:00: [io 0x0d00-0xffff window] [ 1.084935] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.084941] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 1.084947] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 1.084957] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 1.084963] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 1.084969] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 1.084975] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 1.084981] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 1.084988] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 1.084994] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 1.085000] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 1.085006] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 1.085012] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 1.085018] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 1.085024] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 1.085149] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.085472] pnp 00:01: [io 0x002e-0x002f] [ 1.085479] pnp 00:01: [io 0x004e-0x004f] [ 1.085484] pnp 00:01: [io 0x0061] [ 1.085489] pnp 00:01: [io 0x0070] [ 1.085494] pnp 00:01: [io 0x0080] [ 1.085499] pnp 00:01: [io 0x0092] [ 1.085504] pnp 00:01: [io 0x00b2-0x00b3] [ 1.085509] pnp 00:01: [io 0x0063] [ 1.085514] pnp 00:01: [io 0x0065] [ 1.085519] pnp 00:01: [io 0x0067] [ 1.085524] pnp 00:01: [io 0x0600-0x060f] [ 1.085530] pnp 00:01: [io 0x0610] [ 1.085535] pnp 00:01: [io 0x0800-0x080f] [ 1.085540] pnp 00:01: [io 0x0810-0x0817] [ 1.085545] pnp 00:01: [io 0x0400-0x047f] [ 1.085551] pnp 00:01: [io 0x0500-0x053f] [ 1.085556] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 1.085562] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 1.085568] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 1.085574] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 1.085579] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 1.085585] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 1.085591] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 1.085735] system 00:01: [io 0x0600-0x060f] has been reserved [ 1.085742] system 00:01: [io 0x0610] has been reserved [ 1.085749] system 00:01: [io 0x0800-0x080f] has been reserved [ 1.085756] system 00:01: [io 0x0810-0x0817] has been reserved [ 1.085764] system 00:01: [io 0x0400-0x047f] has been reserved [ 1.085771] system 00:01: [io 0x0500-0x053f] has been reserved [ 1.085779] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 1.085787] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.085794] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 1.085801] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.085809] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.085817] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.085824] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.085832] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.085860] pnp 00:02: [io 0x0000-0x001f] [ 1.085866] pnp 00:02: [io 0x0081-0x0091] [ 1.085871] pnp 00:02: [io 0x0093-0x009f] [ 1.085877] pnp 00:02: [io 0x00c0-0x00df] [ 1.085882] pnp 00:02: [dma 4] [ 1.085951] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.086016] pnp 00:03: [io 0x0070-0x0077] [ 1.086093] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.086258] pnp 00:04: [irq 0 disabled] [ 1.086275] pnp 00:04: [irq 8] [ 1.086281] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 1.086355] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.086388] pnp 00:05: [io 0x00f0] [ 1.086403] pnp 00:05: [irq 13] [ 1.086476] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.086507] pnp 00:06: [mem 0xff800000-0xffffffff] [ 1.086578] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) [ 1.086634] pnp 00:07: [io 0x0060] [ 1.086639] pnp 00:07: [io 0x0064] [ 1.086651] pnp 00:07: [irq 1] [ 1.086728] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.086777] pnp 00:08: [irq 12] [ 1.086855] pnp 00:08: Plug and Play ACPI device, IDs SYN1e33 SYN1e00 SYN0002 PNP0f13 (active) [ 1.087037] pnp: PnP ACPI: found 9 devices [ 1.087041] ACPI: ACPI bus type pnp unregistered [ 1.087048] PnPBIOS: Disabled by ACPI PNP [ 1.126259] PCI: max bus depth: 1 pci_try_num: 2 [ 1.126308] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.126316] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.126327] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] [ 1.126337] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 1.126349] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.126357] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 1.126367] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] [ 1.126376] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 1.126388] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 1.126393] pci 0000:00:1e.0: bridge window [io disabled] [ 1.126402] pci 0000:00:1e.0: bridge window [mem disabled] [ 1.126409] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.126442] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.126453] pci 0000:00:1c.0: setting latency timer to 64 [ 1.126471] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.126480] pci 0000:00:1c.1: setting latency timer to 64 [ 1.126493] pci 0000:00:1e.0: setting latency timer to 64 [ 1.126502] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.126508] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.126514] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.126521] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 1.126527] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 1.126533] pci_bus 0000:01: resource 1 [mem 0x93000000-0x93ffffff] [ 1.126540] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref] [ 1.126547] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 1.126553] pci_bus 0000:02: resource 1 [mem 0x92000000-0x92ffffff] [ 1.126559] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref] [ 1.126566] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 1.126572] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 1.126578] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 1.126585] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff] [ 1.126732] NET: Registered protocol family 2 [ 1.126954] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.127648] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.128632] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.129063] TCP: Hash tables configured (established 131072 bind 65536) [ 1.129069] TCP reno registered [ 1.129077] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.129095] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.129569] NET: Registered protocol family 1 [ 1.129607] pci 0000:00:02.0: Boot video device [ 1.144096] PCI: CLS 64 bytes, default 64 [ 1.144203] Unpacking initramfs... [ 1.261138] Freeing initrd memory: 2316k freed [ 1.262817] Simple Boot Flag at 0x44 set to 0x1 [ 1.263741] audit: initializing netlink socket (disabled) [ 1.263763] type=2000 audit(1312911628.256:1): initialized [ 1.295566] highmem bounce pool size: 64 pages [ 1.295578] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.304844] VFS: Disk quotas dquot_6.5.2 [ 1.305015] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.305257] msgmni has been set to 1734 [ 1.305692] alg: No test for stdrng (krng) [ 1.305777] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.305785] io scheduler noop registered [ 1.305789] io scheduler deadline registered [ 1.305825] io scheduler cfq registered (default) [ 1.306012] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.306085] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 1.306214] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.306281] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 1.306665] ERST: Table is not found! [ 1.306695] isapnp: Scanning for PnP cards... [ 1.660530] isapnp: No Plug & Play device found [ 1.660680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.661944] Linux agpgart interface v0.103 [ 1.662179] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 1.662396] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.662657] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.662888] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 1.663217] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 1.668691] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.668709] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.669016] mousedev: PS/2 mouse device common for all mice [ 1.669134] rtc_cmos 00:03: RTC can wake from S4 [ 1.669303] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.669342] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.669370] cpuidle: using governor ladder [ 1.669375] cpuidle: using governor menu [ 1.670018] TCP cubic registered [ 1.670128] NET: Registered protocol family 10 [ 1.671684] Mobile IPv6 [ 1.671691] NET: Registered protocol family 17 [ 1.671701] Registering the dns_resolver key type [ 1.671741] Using IPI No-Shortcut mode [ 1.671971] PM: Hibernation image not present or could not be loaded. [ 1.671993] registered taskstats version 1 [ 1.677160] rtc_cmos 00:03: setting system clock to 2011-08-09 17:40:29 UTC (1312911629) [ 1.677266] Initializing network drop monitor service [ 1.677510] Freeing unused kernel memory: 404k freed [ 1.677866] Write protecting the kernel text: 2768k [ 1.677941] Write protecting the kernel read-only data: 1068k [ 1.677946] NX-protecting the kernel data: 3376k [ 1.708482] udevd[48]: starting version 172 [ 1.794986] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.827694] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20110413/nspredef-456) [ 1.827716] ACPI: [Package] has zero elements (f59c0ca0) [ 1.827802] ACPI: Invalid active0 threshold [ 1.832103] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.832112] ACPI: Thermal Zone [THRM] (46 C) [ 1.884386] SCSI subsystem initialized [ 1.899547] libata version 3.00 loaded. [ 1.902058] ahci 0000:00:1f.2: version 3.0 [ 1.902091] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.902187] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.902372] ahci: SSS flag set, parallel bus scan disabled [ 1.902430] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.902442] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.902456] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.904531] scsi0 : ahci [ 1.904892] scsi1 : ahci [ 1.905153] scsi2 : ahci [ 1.905418] scsi3 : ahci [ 1.906202] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 42 [ 1.906215] ata2: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204180 irq 42 [ 1.906223] ata3: DUMMY [ 1.906228] ata4: DUMMY [ 2.260040] Refined TSC clocksource calibration: 1662.681 MHz. [ 2.260052] Switching to clocksource tsc [ 2.396034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.396860] ata1.00: unexpected _GTF length (4) [ 2.446288] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133 [ 2.446295] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.448075] ata1.00: unexpected _GTF length (4) [ 2.448419] ata1.00: configured for UDMA/133 [ 2.448711] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5 [ 2.768036] ata2: SATA link down (SStatus 0 SControl 300) [ 2.780672] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.780894] sd 0:0:0:0: [sda] Write Protect is off [ 2.780905] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.781014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.903366] sda: sda1 sda2 [ 2.904263] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.366117] PM: Starting manual resume from disk [ 3.366125] PM: Hibernation image partition 8:1 present [ 3.366129] PM: Looking for hibernation image. [ 3.366475] PM: Image not found (code -22) [ 3.366480] PM: Hibernation image not present or could not be loaded. [ 3.376810] REISERFS (device sda2): found reiserfs format "3.6" with standard journal [ 3.376839] REISERFS (device sda2): using ordered data mode [ 3.383898] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 3.384818] REISERFS (device sda2): checking transaction log (sda2) [ 3.455988] REISERFS (device sda2): Using r5 hash to sort names [ 5.409438] udevd[227]: starting version 172 [ 6.225400] ACPI: acpi_idle registered with cpuidle [ 6.250133] Marking TSC unstable due to TSC halts in idle [ 6.257854] Switching to clocksource hpet [ 6.266669] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 6.266688] ACPI: Power Button [PWRB] [ 6.266906] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 6.268444] ACPI: Lid Switch [LID0] [ 6.268726] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.268742] ACPI: Power Button [PWRF] [ 6.346432] wmi: Mapper loaded [ 6.348923] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.349006] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.349135] r8169 0000:01:00.0: setting latency timer to 64 [ 6.349158] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default [ 6.349365] r8169 0000:01:00.0: irq 43 for MSI/MSI-X [ 6.351058] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8306000, 68:b5:99:d3:c1:d8, XID 04000000 IRQ 43 [ 6.358493] ACPI: AC Adapter [AC] (on-line) [ 6.409574] ACPI: Battery Slot [BAT0] (battery present) [ 6.671238] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.763109] usbcore: registered new interface driver usbfs [ 6.763877] usbcore: registered new interface driver hub [ 6.764048] usbcore: registered new device driver usb [ 6.816754] input: HP WMI hotkeys as /devices/virtual/input/input5 [ 6.922465] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.922533] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.922580] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.922590] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.922696] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 6.922752] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 6.922773] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.926672] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 6.926717] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400 [ 6.940107] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.940215] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.940225] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.940232] usb usb1: Product: EHCI Host Controller [ 6.940239] usb usb1: Manufacturer: Linux 3.0.0-1-686-pae ehci_hcd [ 6.940246] usb usb1: SerialNumber: 0000:00:1d.7 [ 6.940663] hub 1-0:1.0: USB hub found [ 6.940681] hub 1-0:1.0: 8 ports detected [ 6.941303] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.952204] cfg80211: Calling CRDA to update world regulatory domain [ 7.022714] uhci_hcd: USB Universal Host Controller Interface driver [ 7.022821] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.022845] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7.022855] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.022888] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.022943] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 [ 7.023063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.023072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.023080] usb usb2: Product: UHCI Host Controller [ 7.023087] usb usb2: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd [ 7.023094] usb usb2: SerialNumber: 0000:00:1d.0 [ 7.023483] hub 2-0:1.0: USB hub found [ 7.023501] hub 2-0:1.0: 2 ports detected [ 7.023757] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.023781] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 7.023791] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.023825] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 7.023912] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060 [ 7.024103] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.024113] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.024121] usb usb3: Product: UHCI Host Controller [ 7.024128] usb usb3: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd [ 7.024135] usb usb3: SerialNumber: 0000:00:1d.1 [ 7.024571] hub 3-0:1.0: USB hub found [ 7.024589] hub 3-0:1.0: 2 ports detected [ 7.024817] uhci_hcd 0000:00:1d.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.024840] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 7.024852] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.024880] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 7.024971] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040 [ 7.025093] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.025103] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.025112] usb usb4: Product: UHCI Host Controller [ 7.025119] usb usb4: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd [ 7.025127] usb usb4: SerialNumber: 0000:00:1d.2 [ 7.025516] hub 4-0:1.0: USB hub found [ 7.025533] hub 4-0:1.0: 2 ports detected [ 7.025766] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 7.025788] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 7.025799] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.025827] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 7.025916] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020 [ 7.026033] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.026043] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.026050] usb usb5: Product: UHCI Host Controller [ 7.026057] usb usb5: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd [ 7.026063] usb usb5: SerialNumber: 0000:00:1d.3 [ 7.026511] hub 5-0:1.0: USB hub found [ 7.026529] hub 5-0:1.0: 2 ports detected [ 7.226650] [drm] Initialized drm 1.1.0 20060810 [ 7.252108] usb 1-8: new high speed USB device number 2 using ehci_hcd [ 7.327252] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. [ 7.397579] i915 0000:00:02.0: power state changed by ACPI to D0 [ 7.397592] i915 0000:00:02.0: power state changed by ACPI to D0 [ 7.397605] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.397613] i915 0000:00:02.0: setting latency timer to 64 [ 7.404121] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned. [ 7.418971] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10 [ 7.419004] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.419020] brcmsmac 0000:02:00.0: setting latency timer to 64 [ 7.452264] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 7.452276] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.452281] [drm] Driver supports precise vblank timestamp query. [ 7.452371] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.454661] usb 1-8: New USB device found, idVendor=174f, idProduct=1122 [ 7.454670] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.454678] usb 1-8: Product: HP Webcam [ 7.454683] usb 1-8: Manufacturer: D-MAX [ 7.454689] usb 1-8: SerialNumber: 00 [ 7.616233] Linux media interface: v0.10 [ 7.627138] Linux video capture interface: v2.00 [ 7.644861] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400 [ 7.690302] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 7.779067] [drm] initialized overlay support [ 7.796226] uvcvideo: Found UVC 1.00 device HP Webcam (174f:1122) [ 7.798361] fbcon: inteldrmfb (fb0) is primary device [ 7.810030] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7 [ 7.810254] usbcore: registered new interface driver uvcvideo [ 7.810260] USB Video Class driver (v1.1.0) [ 7.853941] Console: switching to colour frame buffer device 128x37 [ 7.866892] fb0: inteldrmfb frame buffer device [ 7.866899] drm: registered panic notifier [ 7.875498] acpi device:21: registered as cooling_device2 [ 7.876194] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 7.876355] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 7.876487] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.998841] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.004512] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.004629] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 8.004695] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.102313] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 8.120480] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 8.120784] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 8.883961] cfg80211: World regulatory domain updated: [ 8.883969] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.883977] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.883983] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.883989] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.883996] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.884003] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.884083] cfg80211: Calling CRDA for country: US [ 8.896911] cfg80211: Regulatory domain changed to country: US [ 8.896922] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.896932] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8.896942] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 8.896951] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.896960] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.896970] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.896979] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 8.898929] cfg80211: Calling CRDA for country: EU [ 8.910480] cfg80211: Regulatory domain changed to country: EU [ 8.910488] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.910495] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.910501] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.910507] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.910512] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 10.158750] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k [ 10.618757] loop: module loaded [ 12.124754] fuse init (API version 7.16) [ 13.945497] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 15.409094] r8169 0000:01:00.0: eth0: link down [ 15.409481] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.483912] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) [ 15.486977] ieee80211 phy0: wl_ops_config: change monitor mode: false (implement) [ 15.490118] ieee80211 phy0: wl_ops_config: change power-save mode: false (implement) [ 15.493819] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) [ 15.497257] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.801360] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) [ 17.861726] apm: BIOS not found. [ 19.012598] Bluetooth: Core ver 2.16 [ 19.012676] NET: Registered protocol family 31 [ 19.012682] Bluetooth: HCI device and connection manager initialized [ 19.012690] Bluetooth: HCI socket layer initialized [ 19.012695] Bluetooth: L2CAP socket layer initialized [ 19.012798] Bluetooth: SCO socket layer initialized [ 19.061474] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.061482] Bluetooth: BNEP filters: protocol multicast [ 19.062687] Bluetooth: RFCOMM TTY layer initialized [ 19.062703] Bluetooth: RFCOMM socket layer initialized [ 19.062709] Bluetooth: RFCOMM ver 1.11
--- End Message ---
--- Begin Message ---
- To: Camaleón <noelamac@gmail.com>
- Cc: 637240-done@bugs.debian.org
- Subject: Re: (Solved) Re: brcmsmac: "firmware bug" warning when connecting, hang when unloading brcmsmac driver unless near AP
- From: Jonathan Nieder <jrnieder@gmail.com>
- Date: Sat, 11 Feb 2012 14:09:01 -0600
- Message-id: <20120211200901.GH6944@burratino>
- In-reply-to: <[🔎] CAKprTDEwMO10t4N-iDLSgT+zgCpU3GA7ouvwynM3b+1MR-ZweQ@mail.gmail.com>
- References: <[🔎] CAKprTDG+KH6G6jT0sQPoYbkc1B_rSrzRwyubA5MDR28iRprV8A@mail.gmail.com> <[🔎] 20120211113938.GF3987@burratino> <[🔎] 20120211115903.GA4977@stt008.linux.site> <[🔎] 20120211120848.GH3987@burratino> <[🔎] CAKprTDEwMO10t4N-iDLSgT+zgCpU3GA7ouvwynM3b+1MR-ZweQ@mail.gmail.com>
Version: 3.2.4-1 Camaleón wrote: > It works! :-) > > root@stt300:~# uname -a > Linux stt300 3.2.0-1-686-pae #1 SMP Sun Feb 5 23:52:49 UTC 2012 i686 GNU/Linux > > root@stt300:~# dpkg -l | grep -i -e linux-image-3.2 > ii linux-image-3.2.0-1-686-pae 3.2.4-1 > Linux 3.2 for modern PCs Nice to hear. Thanks for testing.
--- End Message ---
