Bug#659378: [xen dom0] gnome-shell fails to start
On 02/10/2012 09:41 PM, Jonathan Nieder wrote:
> Hi,
>
> Panayiotis Karabassis wrote:
>
>> Program received signal SIGSEGV, Segmentation fault.
>> 0x00007fffe9310674 in ?? ()
>> from /usr/lib/x86_64-linux-gnu/libnvidia-glcore.so.290.10
>
> You're using the nvidia driver; this is not going to work.
Are you sure? On my laptop which has the same configuration (Wheezy,
nvidia, gnome-shell) I can login without problems (I haven't tried
setting up a domU though).
> Can you
> reproduce this using nouveau?
With nouveau the X server doesn't start at all. It just shows a flashing
underscore in the top-left corner (no errors in Xorg.0.log though). With
nvidia the crash happens after login and before the interface appears.
> What is your graphics card? (Please
> attach output from
>
> reportbug --template linux-image-$(uname -r)
>
> so we can get to know your hardware.)
I hope I did it right, I redirected output to a file.
> Hope that helps,
> Jonathan
--
Many thanks,
Panayiotis Karabassis
-- Package-specific info:
** Version:
Linux version 3.1.0-1-amd64 (Debian 3.1.8-2) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Tue Jan 10 05:01:58 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/lvm--athens0-root ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 5.727404] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.727746] Registered led device: rt61pci-phy0::radio
[ 5.727759] Registered led device: rt61pci-phy0::assoc
[ 5.762299] nvidia 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.762306] nvidia 0000:05:00.0: setting latency timer to 64
[ 5.762310] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.762455] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
[ 6.058853] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.143957] snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.143961] hda_intel: Disabling MSI
[ 6.144013] snd_hda_intel 0000:05:00.1: setting latency timer to 64
[ 6.157861] Linux media interface: v0.10
[ 6.165891] Linux video capture interface: v2.00
[ 6.389281] cfg80211: World regulatory domain updated:
[ 6.389284] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.389286] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.389288] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.389290] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.389291] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.389293] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.724063] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.828070] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.932073] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.036064] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.084280] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card0/input6
[ 7.084348] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card0/input7
[ 7.084408] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card0/input8
[ 7.084476] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card0/input9
[ 7.136177] 2:3:2: cannot get freq at ep 0x86
[ 7.275242] cannot find the slot for index 0 (range 0-2), error: -16
[ 7.275264] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[ 7.275294] cannot create card instance 0
[ 7.275341] snd-usb-audio: probe of 4-2:1.0 failed with error -5
[ 7.275367] usbcore: registered new interface driver snd-usb-audio
[ 7.290677] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input10
[ 7.290733] usbcore: registered new interface driver uvcvideo
[ 7.290735] USB Video Class driver (1.1.1)
[ 8.331986] EXT3-fs (dm-0): using internal journal
[ 8.414653] loop: module loaded
[ 8.951973] Adding 7811068k swap on /dev/mapper/lvm--athens0-swap. Priority:-1 extents:1 across:7811068k
[ 10.381989] kjournald starting. Commit interval 5 seconds
[ 10.400273] EXT3-fs (dm-1): using internal journal
[ 10.400277] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 10.417052] kjournald starting. Commit interval 5 seconds
[ 10.428268] EXT3-fs (dm-2): using internal journal
[ 10.428271] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 10.445072] kjournald starting. Commit interval 5 seconds
[ 10.445374] EXT3-fs (dm-4): using internal journal
[ 10.445377] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 10.450392] kjournald starting. Commit interval 5 seconds
[ 10.450777] EXT3-fs (dm-5): using internal journal
[ 10.450780] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 11.744613] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.001887] u32 classifier
[ 12.001889] Performance counters on
[ 12.001890] input device check on
[ 12.001891] Actions configured
[ 12.013309] HTB: quantum of class 20001 is big. Consider r2q change.
[ 12.731224] RPC: Registered named UNIX socket transport module.
[ 12.731227] RPC: Registered udp transport module.
[ 12.731229] RPC: Registered tcp transport module.
[ 12.731230] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.747894] FS-Cache: Loaded
[ 12.762238] FS-Cache: Netfs 'nfs' registered for caching
[ 12.772975] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.925752] fuse init (API version 7.17)
[ 13.000113] wlan0: direct probe to 98:fc:11:d5:7b:75 (try 1/3)
[ 13.003644] wlan0: direct probe responded
[ 13.036071] wlan0: authenticate with 98:fc:11:d5:7b:75 (try 1)
[ 13.042216] wlan0: authenticated
[ 13.056096] wlan0: associate with 98:fc:11:d5:7b:75 (try 1)
[ 13.058326] wlan0: RX AssocResp from 98:fc:11:d5:7b:75 (capab=0x411 status=0 aid=2)
[ 13.058329] wlan0: associated
[ 13.058933] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.141898] Intel AES-NI instructions are not detected.
[ 13.224938] padlock_aes: VIA PadLock not detected.
[ 14.953052] powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6 cpu cores) (version 2.20.00)
[ 14.953063] powernow-k8: Core Performance Boosting: on.
[ 14.953098] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 14.953100] powernow-k8: 1 : pstate 1 (2200 MHz)
[ 14.953126] powernow-k8: 2 : pstate 2 (1500 MHz)
[ 14.953127] powernow-k8: 3 : pstate 3 (800 MHz)
[ 22.534147] postgres (2188): /proc/2188/oom_adj is deprecated, please use /proc/2188/oom_score_adj instead.
[ 23.536030] wlan0: no IPv6 routers present
[ 27.387485] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 27.413876] NFSD: starting 90-second grace period
[ 27.496151] Bluetooth: Core ver 2.16
[ 27.496168] NET: Registered protocol family 31
[ 27.496170] Bluetooth: HCI device and connection manager initialized
[ 27.496172] Bluetooth: HCI socket layer initialized
[ 27.496174] Bluetooth: L2CAP socket layer initialized
[ 27.496178] Bluetooth: SCO socket layer initialized
[ 27.559566] Bluetooth: RFCOMM TTY layer initialized
[ 27.559579] Bluetooth: RFCOMM socket layer initialized
[ 27.559585] Bluetooth: RFCOMM ver 1.11
[ 27.852268] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.852277] Bluetooth: BNEP filters: protocol multicast
[ 28.574862] lp: driver loaded but no devices found
[ 28.599600] ppdev: user-space parallel port driver
[ 325.660085] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1102
board_vendor: ASUSTeK Computer INC.
board_name: M4A87TD/USB3
board_version: Rev 1.xx
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
crc16
powernow_k8
mperf
cpufreq_stats
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
binfmt_misc
cryptd
aes_x86_64
aes_generic
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
cls_tcindex
sch_sfq
sch_htb
sch_dsmark
act_police
cls_u32
sch_ingress
loop
snd_hda_codec_hdmi
uvcvideo
videodev
media
v4l2_compat_ioctl32
snd_hda_codec_via
snd_usb_audio
snd_usbmidi_lib
snd_hda_intel
snd_hda_codec
snd_pcm_oss
snd_hwdep
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
psmouse
nvidia (P)
arc4
rt61pci
crc_itu_t
rt2x00pci
rt2x00lib
mac80211
evdev
snd_timer
snd_seq_device
pcspkr
processor
thermal_sys
wmi
sp5100_tco
cfg80211
button
serio_raw
snd
i2c_piix4
rfkill
k10temp
asus_atk0110
soundcore
edac_core
snd_page_alloc
i2c_core
eeprom_93cx6
edac_mce_amd
ext3
jbd
mbcache
usbhid
hid
dm_mod
raid1
md_mod
sd_mod
sr_mod
crc_t10dif
cdrom
ata_generic
xhci_hcd
ohci_hcd
pata_jmicron
r8169
mii
ehci_hcd
ahci
libahci
pata_atiixp
libata
usbcore
scsi_mod
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.1.0-1-amd64 (SMP w/6 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.1.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.1.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.1.0-1-amd64 suggests:
pn grub-pc 1.98+20100804-14+squeeze1
pn linux-doc-3.1 <none>
Versions of packages linux-image-3.1.0-1-amd64 is related to:
ii firmware-bnx2 <none>
ii firmware-bnx2x <none>
ii firmware-ipw2x00 <none>
ii firmware-ivtv <none>
ii firmware-iwlwifi <none>
ii firmware-linux <none>
ii firmware-linux-nonfree 0.35
ii firmware-qlogic <none>
ii firmware-ralink 0.35
ii xen-hypervisor-4.0-amd64 [xen-hypervisor] 4.0.1-4
-- debconf information:
linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false
linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true
linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64:
Reply to: