[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#656476: Sundance network driver (D-Link DFE-580TX) timeouts rendering interface unusable



> Oh well, we also must make sure we held np->lock in TX completion when
> doing our test to eventually call netif_wake_queue(), I missed it was
> released too early.
>
> here is a more complete patch.

I applied the patch, recompiled the module, loaded it into the kernel and started testing traffic on the interface with the following result :

[ 1124.008030] ------------[ cut here ]------------
[ 1124.008101] WARNING: at /build/buildd-linux-2.6_3.2.1-2-i386-4wAPNj/linux-2.6-3.2.1/debian/build/source_i386_none/net/sched/sch_generic.c:255 dev_watchdog+0xb1/0x104()
[ 1124.008201] Hardware name:
[ 1124.008252] NETDEV WATCHDOG: eth1 (sundance): transmit queue 0 timed out
[ 1124.008309] Modules linked in: sundance(O) p4_clockmod cpufreq_powersave cpufreq_userspace cpufreq_conservative cpufreq_stats speedstep_lib mperf fuse w83627ehf hwmon_vid coretemp loop ohci_hcd snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus snd_pcm usbcore snd_seq snd_timer snd_seq_device shpchp psmouse snd sis900 pci_hotplug serio_raw pcspkr mii evdev soundcore parport_pc snd_page_alloc parport processor tpm_tis tpm tpm_bios thermal_sys button usb_common ext3 jbd mbcache sd_mod crc_t10dif ata_generic sata_sis pata_sis libata scsi_mod [last unloaded: sundance]
[ 1124.010147] Pid: 5122, comm: gnome-terminal Tainted: G           O 3.2.0-1-686-pae #1
[ 1124.010219] Call Trace:
[ 1124.010286]  [<c1038280>] ? warn_slowpath_common+0x68/0x79
[ 1124.010344]  [<c1229e38>] ? dev_watchdog+0xb1/0x104
[ 1124.010399]  [<c10382f9>] ? warn_slowpath_fmt+0x29/0x2d
[ 1124.010455]  [<c1229e38>] ? dev_watchdog+0xb1/0x104
[ 1124.010511]  [<c103ccb5>] ? local_bh_enable+0x2/0x2
[ 1124.010567]  [<c1041e78>] ? run_timer_softirq+0x150/0x1f3
[ 1124.010622]  [<c1229d87>] ? netif_tx_unlock+0x3a/0x3a
[ 1124.010678]  [<c103ccb5>] ? local_bh_enable+0x2/0x2
[ 1124.010733]  [<c103cd49>] ? __do_softirq+0x94/0x12f
[ 1124.010788]  [<c103ccb5>] ? local_bh_enable+0x2/0x2
[ 1124.010841]  <IRQ>  [<c103cf3a>] ? irq_exit+0x32/0x80
[ 1124.010931]  [<c101e6f4>] ? smp_apic_timer_interrupt+0x5b/0x65
[ 1124.012339]  [<c12b9b11>] ? apic_timer_interrupt+0x31/0x38
[ 1124.012397]  [<c12b007b>] ? set_cpu_sibling_map+0x200/0x250
[ 1124.012452] ---[ end trace d55b57d11770d7d5 ]---

After this the same repeat of transmit timeouts (as posted earlier) in the log untill I down the interface.

Mike.


Reply to: