On 1/23/2012 6:21 PM, Jonathan Nieder wrote:
Hi, Harry Coin wrote:I first saw this problem after a routine synaptic update to the latest linux version in squeeze.What were the Linux versions before and after? (/var/log/dpkg.log* might help.)
See below
Creating the file /etc/modprobe.d/bttv.conf with this content: softdep bttv post: drm softdep bt878 post: drm then update-grub2 resolves the problem. HTH![...]** Tainted: P (1) * Proprietary module has been loaded.Please test without the nvidia driver. If it works, we can pass it to the nvidia driver maintainers, and otherwise, we will be in much better shape to investigate this or get help from upstream.
This same problem happened on 3 other computers, none of which have nvidia graphics cards, and it happened on this computer in exactly the same way before loading the nvidia driver. In fact I thought since it looked drm related perhaps going to the non-open driver might solve it, but it changed nothing.
The other computers that had the problem were backend digital video recording systems, old dell optiplex gx110 gx1p and gx200. No add-ins save an DVICO bttv card and a ivtv hauppage 150 each. The all worked fine for a couple years actually, then sooner or later after a reboot they all failed in the exact same way -- the big difference was the change to the boot screen appearance during startup, the 25x80 shifted to the drm/kms and the bt878 died. I'm thinking i2c contention of some sort.
That's a problem locating which linux image update created the issue since reboots didn't necessarily follow updates-- six months between updates and more between reboots was typical. I see the second attempt to fix things with modprobe softdeps November 28th of last year (forcing the bttv to depend on the ethernet driver, just because it loaded later on. Some boots that worked, some boots that didn't. Putting it after drm has made it work all the time on the xw6000). Related, the problem appeared first around 2/19 or perhaps a few weeks earlier last year, it was worked-around then with a drm/kms related modprobe option i915-kms.conf: options i915 modeset=1
Here's a dmesg and lspci on a gx110 that worked for a long time, then failed (not the hp xw6000 I reported about earlier with the same problem). Attached is a tar of dpkg.log on a related system (gx1p).
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-39squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 11 12:29:30 UTC 2012
[ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000feae000 (usable) [ 0.000000] BIOS-e820: 000000000feae000 - 0000000010000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0xfeae max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 00FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000feae000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000fc00000 page 2M [ 0.000000] 000fc00000 - 000feae000 page 4k [ 0.000000] kernel direct mapping tables up to feae000 @ 7000-d000 [ 0.000000] RAMDISK: 0b6ee000 - 0bf42086 [ 0.000000] ACPI: RSDP 000fd790 00014 (v00 DELL )[ 0.000000] ACPI: RSDT 000fd7a4 00028 (v01 DELL GX110 00000007 ASL 00000061) [ 0.000000] ACPI: FACP 000fd7cc 00074 (v01 DELL GX110 00000007 ASL 00000061) [ 0.000000] ACPI: DSDT fffe6000 017FA (v01 DELL dt_ex 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 0feae000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 254MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0feae000 [ 0.000000] low ram: 0 - 0feae000 [ 0.000000] node 0 low ram: 00000000 - 0feae000 [ 0.000000] node 0 bootmap 00002000 - 00003fd8 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000feae000][ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014cccf4] TEXT DATA BSS ==> [0001000000 - 00014cccf4] [ 0.000000] #4 [000b6ee000 - 000bf42086] RAMDISK ==> [000b6ee000 - 000bf42086] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00014cd000 - 00014d316c] BRK ==> [00014cd000 - 00014d316c] [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
[ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000feae [ 0.000000] HighMem 0x0000feae -> 0x0000feae [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0000feae [ 0.000000] On node 0 totalpages: 65102[ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d5000
[ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3968 pages, LIFO batch:0 [ 0.000000] Normal zone: 478 pages used for memmap [ 0.000000] Normal zone: 60624 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- reenabling. [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:efb00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64592 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=6216981c-0e04-42ba-9594-69124e315f5c ro lapic
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)[ 0.000000] Memory: 244244k/260792k available (2504k kernel code, 15832k reserved, 1328k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xd06ae000 - 0xff3fe000 ( 749 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfeae000 ( 254 MB) [ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB) [ 0.000000] .data : 0xc1272289 - 0xc13be480 (1328 kB) [ 0.000000] .text : 0xc1000000 - 0xc1272289 (2504 kB)[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 730.856 MHz processor.[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 1461.71 BogoMIPS (lpj=2923424)
[ 0.004194] Security Framework initialized [ 0.004274] SELinux: Disabled at boot. [ 0.004353] Mount-cache hash table entries: 512 [ 0.004844] Initializing cgroup subsys ns [ 0.004917] Initializing cgroup subsys cpuacct [ 0.004984] Initializing cgroup subsys devices [ 0.005049] Initializing cgroup subsys freezer [ 0.005110] Initializing cgroup subsys net_cls [ 0.005247] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.005341] CPU: L2 cache: 256K [ 0.005407] mce: CPU supports 5 MCE banks [ 0.005520] Performance Events: p6 PMU driver. [ 0.005648] ... version: 0 [ 0.005707] ... bit width: 32 [ 0.005766] ... generic registers: 2 [ 0.005826] ... value mask: 00000000ffffffff [ 0.005890] ... max period: 000000007fffffff [ 0.005952] ... fixed-purpose events: 0 [ 0.006012] ... event mask: 0000000000000003 [ 0.006085] Checking 'hlt' instruction... OK. [ 0.020828] SMP alternatives: switching to UP code [ 0.029419] Freeing SMP alternatives: 13k freed [ 0.029536] ACPI: Core revision 20090903 [ 0.045403] ACPI: setting ELCR to 0200 (from 0e20) [ 0.046040] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.046108] weird, boot CPU (#0) not listed by the BIOS. [ 0.046170] SMP motherboard not detected. [ 0.048001] SMP disabled [ 0.048001] Brought up 1 CPUs [ 0.048001] Total of 1 processors activated (1461.71 BogoMIPS). [ 0.048001] CPU0 attaching NULL sched-domain. [ 0.048001] devtmpfs: initialized [ 0.048001] regulator: core version 0.5 [ 0.048001] NET: Registered protocol family 16 [ 0.048113] ACPI: bus type pci registered [ 0.073943] PCI: PCI BIOS revision 2.10 entry at 0xfc0be, last bus=1 [ 0.074011] PCI: Using configuration type 1 for base access [ 0.075496] bio: create slab <bio-0> at 0 [ 0.076510] ACPI: EC: Look up EC in DSDT [ 0.083710] ACPI: Interpreter enabled [ 0.083790] ACPI: (supports S0 S1 S4 S5) [ 0.084015] ACPI: Using PIC for interrupt routing [ 0.092290] ACPI: No dock devices found. [ 0.092422] ACPI: PCI Root Bridge [PCI0] (0000:00)[ 0.092680] pci 0000:00:01.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff]
[ 0.092695] pci 0000:00:01.0: reg 14 32bit mmio: [0xff000000-0xff07ffff] [ 0.092948] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.093030] pci 0000:00:1f.3: reg 20 io port: [0xdcd0-0xdcdf][ 0.093142] pci 0000:01:07.0: reg 10 32bit mmio pref: [0xf8001000-0xf8001fff] [ 0.093261] pci 0000:01:07.1: reg 10 32bit mmio pref: [0xf8000000-0xf8000fff]
[ 0.093391] pci 0000:01:0c.0: reg 10 io port: [0xec80-0xecff] [ 0.093407] pci 0000:01:0c.0: reg 14 32bit mmio: [0xfdfffc00-0xfdfffc7f][ 0.093442] pci 0000:01:0c.0: reg 30 32bit mmio pref: [0xfe000000-0xfe01ffff]
[ 0.093470] pci 0000:01:0c.0: supports D1 D2 [ 0.093478] pci 0000:01:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.093549] pci 0000:01:0c.0: PME# disabled [ 0.093650] pci 0000:00:1e.0: transparent bridge [ 0.093716] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.093728] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd000000-0xfeffffff][ 0.093741] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf8000000-0xf80fffff]
[ 0.093759] pci_bus 0000:00: on NUMA node 0 [ 0.093773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.094272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT][ 0.097745] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.098623] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.099508] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 0.100401] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.101163] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.101263] vgaarb: loaded [ 0.101612] PCI: Using ACPI for IRQ routing [ 0.102072] Switching to clocksource tsc [ 0.104382] pnp: PnP ACPI init [ 0.104535] ACPI: bus type pnp registered [ 0.115606] pnp: PnP ACPI: found 13 devices [ 0.115683] ACPI: ACPI bus type pnp unregistered [ 0.115753] PnPBIOS: Disabled by ACPI PNP [ 0.115855] system 00:00: iomem range 0x0-0x9ffff could not be reserved[ 0.115928] system 00:00: iomem range 0x100000-0xffffff could not be reserved [ 0.116000] system 00:00: iomem range 0x1000000-0xfeadfff could not be reserved [ 0.116087] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.116159] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.116230] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.116324] system 00:0c: ioport range 0x800-0x85f has been reserved [ 0.116394] system 00:0c: ioport range 0xc00-0xc7f has been reserved [ 0.116463] system 00:0c: ioport range 0x860-0x8ff has been reserved [ 0.151886] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.151960] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.152031] pci 0000:00:1e.0: MEM window: 0xfd000000-0xfeffffff [ 0.152101] pci 0000:00:1e.0: PREFETCH window: 0xf8000000-0xf80fffff [ 0.152191] pci 0000:00:1e.0: setting latency timer to 64 [ 0.152207] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.152217] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.152230] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.152240] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfeffffff] [ 0.152250] pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xf80fffff] [ 0.152259] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.152269] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.152394] NET: Registered protocol family 2[ 0.152785] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.153932] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.154194] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.154450] TCP: Hash tables configured (established 8192 bind 8192) [ 0.154517] TCP reno registered [ 0.154850] NET: Registered protocol family 1 [ 0.154981] pci 0000:00:01.0: Boot video device [ 0.155208] Unpacking initramfs... [ 0.999031] Freeing initrd memory: 8528k freed [ 1.048491] audit: initializing netlink socket (disabled) [ 1.048620] type=2000 audit(1327212504.045:1): initialized [ 1.063648] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.069451] VFS: Disk quotas dquot_6.5.2 [ 1.069755] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.070107] msgmni has been set to 494 [ 1.072226] alg: No test for stdrng (krng)[ 1.072426] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.072515] io scheduler noop registered [ 1.072576] io scheduler anticipatory registered [ 1.072637] io scheduler deadline registered [ 1.072854] io scheduler cfq registered (default) [ 1.073462] isapnp: Scanning for PnP cards... [ 1.427348] isapnp: No Plug & Play device found [ 1.432680] Linux agpgart interface v0.103 [ 1.432980] agpgart-intel 0000:00:00.0: Intel i810 Chipset [ 1.438585] pci 0000:00:01.0: detected 4MB dedicated video ram [ 1.440763] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000 [ 1.441071] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.441298] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.442308] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.445881] serial 00:0a: activated [ 1.446174] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A[ 1.446729] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.449089] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.449167] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.449610] mice: PS/2 mouse device common for all mice [ 1.449979] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.450078] rtc0: alarms up to one day, 242 bytes nvram [ 1.450178] cpuidle: using governor ladder [ 1.450239] cpuidle: using governor menu [ 1.450307] No iBFT detected. [ 1.451821] TCP cubic registered [ 1.452519] NET: Registered protocol family 10 [ 1.455451] Mobile IPv6 [ 1.455515] NET: Registered protocol family 17 [ 1.455623] Using IPI No-Shortcut mode [ 1.455985] PM: Resume from disk failed. [ 1.456083] registered taskstats version 1[ 1.456572] rtc_cmos 00:05: setting system clock to 2012-01-22 06:08:25 UTC (1327212505)
[ 1.456775] Initalizing network drop monitor service [ 1.456933] Freeing unused kernel memory: 380k freed [ 1.458792] Write protecting the kernel text: 2508k [ 1.458937] Write protecting the kernel read-only data: 924k[ 1.480541] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.532364] udev[46]: starting version 164 [ 2.101426] SCSI subsystem initialized [ 2.238257] libata version 3.00 loaded. [ 2.273643] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 2.273730] PCI: setting IRQ 5 as level-triggered[ 2.273743] 3c59x 0000:01:0c.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 2.273859] 3c59x: Donald Becker and others. [ 2.273938] 0000:01:0c.0: 3Com PCI 3c905C Tornado at d0894c00. [ 2.297702] ata_piix 0000:00:1f.1: version 2.13 [ 2.297877] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.298129] scsi0 : ata_piix [ 2.298918] scsi1 : ata_piix[ 2.299301] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.299378] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.300714] ata2: port disabled. ignoring. [ 2.474873] ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100 [ 2.474959] ata1.00: 625142448 sectors, multi 8: LBA48 [ 2.480689] ata1.00: configured for UDMA/66[ 2.481168] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJB-0 00.0 PQ: 0 ANSI: 5 [ 2.534651] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.534977] sd 0:0:0:0: [sda] Write Protect is off [ 2.535044] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 2.535142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.535766] sda: sda1 sda2 < sda5 > [ 2.565049] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.224056] floppy0: no floppy controllers found [ 5.322417] PM: Starting manual resume from disk [ 5.322518] PM: Resume from partition 8:5 [ 5.322524] PM: Checking hibernation image. [ 5.323007] PM: Error -22 checking image file [ 5.323013] PM: Resume from disk failed. [ 5.438401] kjournald starting. Commit interval 5 seconds [ 5.438509] EXT3-fs: mounted filesystem with writeback data mode. [ 7.171206] udev[210]: starting version 164 [ 8.068573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.155504] input: PC Speaker as /devices/platform/pcspkr/input/input1[ 8.207334] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 8.207739] ACPI: Power Button [PWRF] [ 8.237868] processor LNXCPU:00: registered as cooling_device0[ 8.271743] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.368721] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.411228] parport_pc 00:0b: activated [ 8.411340] parport_pc 00:0b: reported by Plug and Play ACPI[ 8.414359] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 8.435320] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 8.435403] PCI: setting IRQ 10 as level-triggered[ 8.435420] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 8.435528] i801_smbus 0000:00:1f.3: Enabling SMBus device [ 8.442823] Intel 82802 RNG detected [ 9.181994] Linux video capture interface: v2.00[ 9.185966] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 9.381704] bttv: driver version 0.9.18 loaded [ 9.381781] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 9.382877] bttv: Bt8xx card found (0). [ 9.384449] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 9.384526] PCI: setting IRQ 11 as level-triggered[ 9.384540] bttv 0000:01:07.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 9.384643] bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 11, latency: 64, mmio: 0xf8001000 [ 9.384835] bttv0: detected: DViCO FusionHDTV 5 Lite [card=135], PCI subsystem ID is 18ac:d500
[ 9.384925] bttv0: using: DViCO FusionHDTV 5 Lite [card=135,autodetected] [ 9.384996] IRQ 11/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 9.385132] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 9.385514] bttv0: tuner type=64 [ 11.204065] floppy0: no floppy controllers found [ 39.444039] bt878: gave up waiting for init of module bttv. [ 39.444131] bt878: Unknown symbol bttv_read_gpio [ 69.444051] bt878: gave up waiting for init of module bttv. [ 69.444137] bt878: Unknown symbol bttv_write_gpio [ 99.444042] bt878: gave up waiting for init of module bttv. [ 99.444134] bt878: Unknown symbol bttv_gpio_enable [ 99.462755] bttv0: audio absent, no audio device found! [ 99.539027] tuner 1-0043: chip found @ 0x86 (bt878 #0 [sw]) [ 99.549930] tda9887 1-0043: creating new instance [ 99.550007] tda9887 1-0043: tda988[5/6/7] found [ 99.557539] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 99.575590] tuner-simple 1-0061: creating new instance [ 99.575673] tuner-simple 1-0061: type set to 64 (LG TDVS-H06xF) [ 99.577362] bttv0: registered device video1 [ 99.577641] bttv0: registered device vbi0 [ 99.578824] bttv0: add subdevice "dvb0" [ 99.633956] bt878: AUDIO driver version 0.0.0 loaded [ 99.634103] bt878: Bt878 AUDIO function found (0).[ 99.634203] bt878 0000:01:07.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 99.634293] bt878_probe: card id=[0xd50018ac],[ DViCO FusionHDTV 5 Lite ] has DVB functions. [ 99.634390] bt878(0): Bt878 (rev 17) at 01:07.1, irq: 11, latency: 64, memory: 0xf8000000
[ 99.634561] IRQ 11/bt878: IRQF_DISABLED is not guaranteed on shared IRQs [ 99.800695] DVB: registering new adapter (bttv0) [ 100.071176] tuner-simple 1-0061: attaching existing instance [ 100.071259] tuner-simple 1-0061: type set to 64 (LG TDVS-H06xF)[ 100.071350] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... [ 100.808650] Adding 746980k swap on /dev/sda5. Priority:-1 extents:1 across:746980k
[ 101.064264] EXT3 FS on sda1, internal journal [ 101.311374] loop: module loaded [ 102.793354] RPC: Registered udp transport module. [ 102.793448] RPC: Registered tcp transport module. [ 102.793509] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 103.073954] eth0: setting full-duplex. [ 103.187363] Slow work thread pool: Starting up [ 103.188908] Slow work thread pool: Ready [ 103.189220] FS-Cache: Loaded [ 103.566772] FS-Cache: Netfs 'nfs' registered for caching [ 103.671623] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 104.369108] fuse init (API version 7.13) [ 105.359407] svc: failed to register lockdv1 RPC service (errno 97).[ 105.367819] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 105.388762] NFSD: starting 90-second grace period [ 112.420410] lirc_dev: IR Remote Control driver registered, major 61 [ 112.940070] lirc_serial: auto-detected active high receiver [ 112.940159] lirc_dev: lirc_register_plugin: sample_rate: 0 [ 113.780042] eth0: no IPv6 routers present00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)
Subsystem: Dell OptiPlex GX110
Flags: bus master, fast devsel, latency 0
Kernel driver in use: agpgart-intel
00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC)
Chipset Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell OptiPlex GX110
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Memory at ff000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [dc] Power Management version 1
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd000000-feffffff
Prefetchable memory behind bridge: f8000000-f80fffff
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02)
(prog-if 80 [Master])
Subsystem: Intel Corporation 82801AA IDE Controller
Flags: bus master, medium devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)
Subsystem: Intel Corporation 82801AA SMBus Controller
Flags: medium devsel, IRQ 10
I/O ports at dcd0 [size=16]
Kernel driver in use: i801_smbus
01:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
Subsystem: DViCO Corporation DViCO FusionHDTV5 Lite
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at f8001000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: bttv
01:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
Subsystem: DViCO Corporation DViCO FusionHDTV5 Lite
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at f8000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: bt878
01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 78)
Subsystem: Dell OptiPlex GX110
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at ec80 [size=128]
Memory at fdfffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at fe000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: 3c59x
Thanks and hope that helps, Jonathan
Attachment:
dpkg.tar
Description: Binary data