--- Begin Message ---
Package: linux-2.6
Version: 2.6.39-3~bpo60+1
Severity: normal
When I press the power button to resume the system from suspend, the
power light was on and the screen left black. There was no effect whatever
keyboard I pressed, even though the magic key SysRq + ... is invalid. So
I must press the power button for a long time to shutdown the system.
I'm sure the problem is about kernel because there's no such problem in
linux kernel 2.6.38 or 3.0.
-- Package-specific info:
** Version:
Linux version 2.6.39-bpo.2-686-pae (Debian 2.6.39-3~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Thu Aug 4 11:02:22 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.39-bpo.2-686-pae root=UUID=4a6467bf-103c-4dd5-b8dc-bde482eb469f ro quiet
** Not tainted
** Kernel log:
[ 1.981746] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 1.981917] generic-usb 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 1.982097] usbcore: registered new interface driver usbhid
[ 1.982100] usbhid: USB HID core driver
[ 3.968703] EXT4-fs (sda8): INFO: recovery required on readonly filesystem
[ 3.968707] EXT4-fs (sda8): write access will be enabled during recovery
[ 4.449053] EXT4-fs (sda8): recovery complete
[ 4.453729] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 6.235859] udev[315]: starting version 164
[ 6.843337] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 6.843396] ACPI: Lid Switch [LID0]
[ 6.843504] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 6.843511] ACPI: Power Button [PWRB]
[ 6.843610] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 6.843615] ACPI: Sleep Button [SLPB]
[ 6.843747] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.843751] ACPI: Power Button [PWRF]
[ 7.229722] ACPI: AC Adapter [ADP1] (on-line)
[ 7.276120] lib80211: common routines for IEEE802.11 drivers
[ 7.276124] lib80211_crypt: registered algorithm 'NULL'
[ 7.292777] ACPI: Battery Slot [BAT1] (battery present)
[ 7.515391] cfg80211: Calling CRDA to update world regulatory domain
[ 7.658142] ACPI: acpi_idle registered with cpuidle
[ 7.658477] Marking TSC unstable due to TSC halts in idle
[ 7.659906] Switching to clocksource hpet
[ 7.857131] libipw: 802.11 data/management/control stack, git-1.1.13
[ 7.857135] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 7.873831] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.948398] [drm] Initialized drm 1.1.0 20060810
[ 7.976135] yenta_cardbus 0000:06:09.0: CardBus bridge found [144d:c502]
[ 8.009680] intel_rng: FWH not detected
[ 8.113121] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 8.113126] yenta_cardbus 0000:06:09.0: Socket status: 30000006
[ 8.113131] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 8.113143] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 8.113148] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff
[ 8.118406] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0xb8000000-0xb80fffff]
[ 8.118410] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb8000000-0xb80fffff: excluding 0xb8000000-0xb800ffff
[ 8.118429] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x25ffffff pref]
[ 8.118433] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x25ffffff: excluding 0x20000000-0x25ffffff
[ 8.155938] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 8.155942] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 8.156080] ipw2200 0000:06:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.156107] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 8.160220] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.402602] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.402610] i915 0000:00:02.0: setting latency timer to 64
[ 8.404589] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.404593] [drm] Driver supports precise vblank timestamp query.
[ 8.439040] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 8.440607] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 8.441292] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 8.441858] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 8.442487] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xd8000-0xfffff
[ 8.442551] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 8.442616] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 8.442685] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.470771] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.471196] [drm] initialized overlay support
[ 8.785665] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[ 8.976031] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xae6eb1, caps: 0x944713/0xc0000/0x0
[ 9.004969] fbcon: inteldrmfb (fb0) is primary device
[ 9.007664] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[ 9.014947] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 9.044527] fixme: max PWM is zero.
[ 9.048539] Console: switching to colour frame buffer device 128x48
[ 9.052650] fb0: inteldrmfb frame buffer device
[ 9.052652] drm: registered panic notifier
[ 9.056056] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 9.056158] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 9.056537] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.884977] EXT4-fs (sda8): re-mounted. Opts: (null)
[ 11.151019] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 11.372213] loop: module loaded
[ 12.196891] EXT3-fs: barriers not enabled
[ 12.197096] kjournald starting. Commit interval 5 seconds
[ 12.197401] EXT3-fs (sda6): using internal journal
[ 12.197404] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 12.948656] fuse init (API version 7.16)
[ 16.095468] Bluetooth: Core ver 2.16
[ 16.095495] NET: Registered protocol family 31
[ 16.095497] Bluetooth: HCI device and connection manager initialized
[ 16.095501] Bluetooth: HCI socket layer initialized
[ 16.095503] Bluetooth: L2CAP socket layer initialized
[ 16.095694] Bluetooth: SCO socket layer initialized
[ 16.161523] Bluetooth: RFCOMM TTY layer initialized
[ 16.161528] Bluetooth: RFCOMM socket layer initialized
[ 16.161530] Bluetooth: RFCOMM ver 1.11
[ 16.212284] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.212287] Bluetooth: BNEP filters: protocol multicast
[ 16.284563] Bridge firewalling registered
[ 19.046254] tun: Universal TUN/TAP device driver, 1.6
[ 19.046261] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 21.074904] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.652350] lib80211_crypt: registered algorithm 'CCMP'
[ 23.877580] Intel AES-NI instructions are not detected.
[ 23.916995] padlock_aes: VIA PadLock not detected.
[ 24.055944] lib80211_crypt: registered algorithm 'TKIP'
[ 32.048071] eth1: no IPv6 routers present
[ 42.656029] teredo: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
michael_mic 12490 4
arc4 12418 2
ecb 12649 2
lib80211_crypt_tkip 12939 1
cryptd 14071 0
aes_i586 16608 1
aes_generic 37066 1 aes_i586
lib80211_crypt_ccmp 12677 1
tun 17663 2
acpi_cpufreq 12737 1
mperf 12387 1 acpi_cpufreq
cpufreq_powersave 12422 0
cpufreq_conservative 12987 0
cpufreq_stats 12711 0
cpufreq_userspace 12520 0
bridge 59217 0
stp 12368 1 bridge
bnep 17147 2
rfcomm 31961 0
bluetooth 92361 8 bnep,rfcomm
fuse 55666 1
ext3 102125 1
jbd 40818 1 ext3
loop 17777 0
firewire_sbp2 17514 0
joydev 16906 0
i915 286502 2
drm_kms_helper 26550 1 i915
tpm_tis 12949 0
pcspkr 12515 0
ipw2200 113855 0
psmouse 45863 0
evdev 17180 19
serio_raw 12758 0
tpm 17476 1 tpm_tis
rng_core 12550 0
tpm_bios 12799 1 tpm
yenta_socket 22152 0
pcmcia_rsrc 17314 1 yenta_socket
drm 129190 3 i915,drm_kms_helper
i2c_i801 12670 0
i2c_algo_bit 12706 1 i915
libipw 25874 1 ipw2200
i2c_core 19022 5 i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
processor 26983 2 acpi_cpufreq
cfg80211 107076 2 ipw2200,libipw
rfkill 18510 3 bluetooth,cfg80211
battery 12957 0
video 17345 1 i915
lib80211 12870 4 lib80211_crypt_tkip,lib80211_crypt_ccmp,ipw2200,libipw
ac 12552 0
power_supply 13283 2 battery,ac
button 12783 1 i915
ext4 275094 1
mbcache 12810 2 ext3,ext4
jbd2 55701 1 ext4
crc16 12327 2 bluetooth,ext4
usbhid 35206 0
hid 59841 1 usbhid
sg 21385 0
sr_mod 17418 0
sd_mod 35060 3
crc_t10dif 12332 1 sd_mod
cdrom 34631 1 sr_mod
ata_generic 12439 0
ata_piix 21079 2
libata 132100 2 ata_generic,ata_piix
b44 22672 0
uhci_hcd 21850 0
ehci_hcd 34885 0
ssb 42722 1 b44
sdhci_pci 13000 0
sdhci 21405 1 sdhci_pci
scsi_mod 134453 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore 99225 4 usbhid,uhci_hcd,ehci_hcd
pcmcia 32024 1 ssb
firewire_ohci 26332 0
thermal 13058 0
mmc_core 56896 2 ssb,sdhci
fan 12594 0
thermal_sys 17667 4 processor,video,fan,thermal
pcmcia_core 17973 3 yenta_socket,pcmcia_rsrc,pcmcia
firewire_core 42365 2 firewire_sbp2,firewire_ohci
mii 12595 1 b44
crc_itu_t 12331 1 firewire_core
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:00:f0:7e:c3:5c brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:13:ce:f6:7a:dd brd ff:ff:ff:ff:ff:ff
inet 192.168.0.103/24 brd 192.168.0.255 scope global eth1
inet6 fe80::213:ceff:fef6:7add/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether c2:79:43:3a:7f:88 brd ff:ff:ff:ff:ff:ff
6: teredo: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1280 qdisc pfifo_fast state UNKNOWN qlen 500
link/none
inet6 2001:0:4137:9e76:3885:537b:8b19:f474/32 scope global
valid_lft forever preferred_lft forever
inet6 fe80::ffff:ffff:ffff/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 680 8 0 0 0 0 0 0 680 8 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth1: 25415 144 2 2 0 0 0 0 15750 143 0 1 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
teredo: 0 0 0 0 0 0 0 0 144 3 0 0 0 0 0 0
*** Protocol statistics:
Ip:
150 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
119 incoming packets delivered
125 requests sent out
Icmp:
4 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 4
4 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 4
IcmpMsg:
InType3: 4
OutType3: 4
Tcp:
3 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
16 segments received
17 segments send out
0 segments retransmited
0 bad segments received.
1 resets sent
Udp:
93 packets received
4 packets to unknown port received.
0 packet receive errors
101 packets sent
UdpLite:
TcpExt:
3 packet headers predicted
6 acknowledgments not containing data payload received
IpExt:
InMcastPkts: 11
OutMcastPkts: 13
InOctets: 26018
OutOctets: 11403
InMcastOctets: 2565
OutMcastOctets: 2653
*** Device features:
eth0: 0x4000
eth1: 0x6000
lo: 0x201b7c65
pan0: 0xff78e5
teredo: 0x4000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at b0000000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 26000000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: b4000000-b7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b8000000-b80fffff
Prefetchable memory behind bridge: 0000000020000000-0000000025ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: i801_smbus
06:05.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
Subsystem: Samsung Electronics Co Ltd Device [144d:c01a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 22
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at 24000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: b44
06:07.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Samsung P35 integrated WLAN [8086:2731]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at b8002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
06:09.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
Subsystem: Samsung Electronics Co Ltd Device [144d:c502]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 000da000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
06:09.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c018]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at b8003000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:09.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
Subsystem: Samsung Electronics Co Ltd X20 IV [144d:c018]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin C routed to IRQ 18
Region 0: Memory at b8003800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
06:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
Subsystem: Samsung Electronics Co Ltd X20 IV [144d:c018]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at b8003c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
** Sound cards:
-- System Information:
Debian Release: 6.0.3
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 'proposed-updates')
Architecture: i386 (i686)
Kernel: Linux 2.6.39-bpo.2-686-pae (SMP w/1 CPU core)
Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-bpo.2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs
ii linux-base 3.4~bpo60+1 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-bpo.2-686-pae recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.39-bpo.2-686-pae suggests:
ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version
pn linux-doc-2.6. <none> (no description available)
Versions of packages linux-image-2.6.39-bpo.2-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
ii firmware-ipw2x00 0.32~bpo60+1 Binary firmware for Intel Pro Wire
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-bpo.2-686-pae/postinst/ignoring-ramdisk:
linux-image-2.6.39-bpo.2-686-pae/prerm/removing-running-kernel-2.6.39-bpo.2-686-pae: true
linux-image-2.6.39-bpo.2-686-pae/postinst/depmod-error-initrd-2.6.39-bpo.2-686-pae: false
linux-image-2.6.39-bpo.2-686-pae/postinst/missing-firmware-2.6.39-bpo.2-686-pae:
--- End Message ---