Bug#656877: linux-image-2.6.32-5-kirkwood: Unable to modprobe sd_mod and thus to mount USB devices
Package: linux-2.6
Version: 2.6.32-39squeeze1
Severity: grave
Justification: renders package unusable
# modprobe sd_mod
FATAL: Error inserting sd_mod (/lib/modules/2.6.32-5-kirkwood/kernel/drivers/scsi/sd_mod.ko): Unknown symbol in module, or unknown parameter (see dmesg)
# dmesg|tail
[…]
[ 1213.753328] sd_mod: Unknown symbol scsi_verify_blk_ioctl
[ 1213.764231] sd_mod: Unknown symbol scsi_cmd_blk_ioctl
-- Package-specific info:
** Version:
Linux version 2.6.32-5-kirkwood (Debian 2.6.32-38) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Mon Oct 3 16:55:04 UTC 2011
** Command line:
console=ttyS0,115200
** Not tainted
** Kernel log:
[ 0.250978] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.251157] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.251167] TCP reno registered
[ 0.251316] NET: Registered protocol family 1
[ 0.251488] Unpacking initramfs...
[ 0.390735] Freeing initrd memory: 2284K
[ 0.390844] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.391091] audit: initializing netlink socket (disabled)
[ 0.391124] type=2000 audit(0.380:1): initialized
[ 0.397586] VFS: Disk quotas dquot_6.5.2
[ 0.397846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.397962] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.398624] msgmni has been set to 1006
[ 0.400343] alg: No test for stdrng (krng)
[ 0.400463] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.400475] io scheduler noop registered
[ 0.400482] io scheduler anticipatory registered
[ 0.400490] io scheduler deadline registered
[ 0.400676] io scheduler cfq registered (default)
[ 0.406702] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.407174] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 0.723343] console [ttyS0] enabled
[ 0.727411] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
[ 0.736108] Scanning device for bad blocks
[ 0.891983] Creating 3 MTD partitions on "orion_nand":
[ 0.897156] 0x000000000000-0x000000100000 : "u-boot"
[ 0.902708] 0x000000100000-0x000000500000 : "uImage"
[ 0.908185] 0x000000500000-0x000020000000 : "root"
[ 0.914405] mice: PS/2 mouse device common for all mice
[ 0.919923] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 0.925872] i2c /dev entries driver
[ 0.929572] cpuidle: using governor ladder
[ 0.933800] cpuidle: using governor menu
[ 0.937857] Registered led device: plug:green:health
[ 0.942893] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 0.949309] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[ 0.995647] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 1.035645] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 1.075645] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[ 1.115645] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[ 1.122313] TCP cubic registered
[ 1.125554] NET: Registered protocol family 17
[ 1.130050] Gating clock of unused units
[ 1.130058] before: 0x00dfc3fd
[ 1.130065] after: 0x00c7c1d9
[ 1.130364] registered taskstats version 1
[ 1.135158] rtc-mv rtc-mv: setting system clock to 2012-01-22 14:51:58 UTC (1327243918)
[ 1.143273] Initalizing network drop monitor service
[ 1.148329] Freeing init memory: 124K
[ 1.226056] udev[44]: starting version 164
[ 1.451840] mmc0: mvsdio driver initialized, using GPIO 47 for card detection
[ 1.562507] mmc0: new high speed SDHC card at address e5bf
[ 1.581543] mmcblk0: mmc0:e5bf SD08G 7.68 GiB
[ 1.586216] mmcblk0: p1 p2 p3 p4
[ 1.942157] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 2.567629] udev[150]: starting version 164
[ 3.010261] SCSI subsystem initialized
[ 3.222025] libata version 3.00 loaded.
[ 3.297493] usbcore: registered new interface driver usbfs
[ 3.313053] usbcore: registered new interface driver hub
[ 3.339601] usbcore: registered new device driver usb
[ 3.367004] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.385160] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 3.392179] mv643xx_eth smi: probed
[ 3.396231] sata_mv sata_mv.0: version 1.28
[ 3.400553] sata_mv sata_mv.0: slots 32 ports 2
[ 3.406589] scsi0 : sata_mv
[ 3.410032] scsi1 : sata_mv
[ 3.413253] ata1: SATA max UDMA/133 irq 21
[ 3.417411] ata2: SATA max UDMA/133 irq 21
[ 3.421587] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 3.427789] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 3.455647] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 3.475611] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 3.481616] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.488457] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.495724] usb usb1: Product: Marvell Orion EHCI
[ 3.500454] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
[ 3.506850] usb usb1: SerialNumber: orion-ehci.0
[ 3.512399] usb usb1: configuration #1 chosen from 1 choice
[ 3.518327] hub 1-0:1.0: USB hub found
[ 3.522126] hub 1-0:1.0: 1 port detected
[ 3.533816] net eth0: port 0 with MAC address f0:ad:4e:00:2d:53
[ 3.775629] ata1: SATA link down (SStatus 0 SControl F300)
[ 4.125627] ata2: SATA link down (SStatus 0 SControl F300)
[ 4.749791] loop: module loaded
[ 5.825220] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode
[ 5.914087] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode
[ 8.575215] eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 19.159419] NET: Registered protocol family 10
[ 20.916604] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.585751] eth0: no IPv6 routers present
[ 37.737987] sd_mod: Unknown symbol scsi_verify_blk_ioctl
[ 37.748886] sd_mod: Unknown symbol scsi_cmd_blk_ioctl
[ 45.031556] sd_mod: Unknown symbol scsi_verify_blk_ioctl
[ 45.042446] sd_mod: Unknown symbol scsi_cmd_blk_ioctl
[ 1204.513382] sd_mod: Unknown symbol scsi_verify_blk_ioctl
[ 1204.524281] sd_mod: Unknown symbol scsi_cmd_blk_ioctl
[ 1213.753328] sd_mod: Unknown symbol scsi_verify_blk_ioctl
[ 1213.764231] sd_mod: Unknown symbol scsi_cmd_blk_ioctl
** Model information
Processor : Feroceon 88FR131 rev 1 (v5l)
Hardware : Marvell eSATA SheevaPlug Reference Board
Revision : 0000
** Loaded modules:
Module Size Used by
crc_t10dif 1106 0
xt_multiport 2341 1
iptable_filter 2012 1
ip_tables 9004 1 iptable_filter
x_tables 10753 2 xt_multiport,ip_tables
ipv6 253946 18
ext2 55355 1
loop 11435 0
hmac 2475 0
ehci_hcd 36541 0
sata_mv 24406 0
sha1_generic 1717 0
mv643xx_eth 22574 0
usbcore 122759 2 ehci_hcd
libata 137954 1 sata_mv
libphy 14844 1 mv643xx_eth
nls_base 5367 1 usbcore
inet_lro 5060 1 mv643xx_eth
mv_cesa 9270 0
scsi_mod 124300 1 libata
aes_generic 32820 1 mv_cesa
ext4 288561 3
mbcache 4860 2 ext2,ext4
jbd2 64191 1 ext4
mmc_block 7658 5
mvsdio 5318 0
mmc_core 50218 2 mmc_block,mvsdio
** PCI devices:
** Sound cards:
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: armel (armv5tel)
Kernel: Linux 2.6.32-5-kirkwood
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-39squeeze1 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-kirkwood recommends:
pn firmware-linux-free <none> (no description available)
ii uboot-mkimage 0.4 generate kernel image for U-Boot
Versions of packages linux-image-2.6.32-5-kirkwood suggests:
pn fdutils <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-kirkwood is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-kirkwood/postinst/depmod-error-initrd-2.6.32-5-kirkwood: false
linux-image-2.6.32-5-kirkwood/postinst/ignoring-do-bootloader-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/postinst/missing-firmware-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/prerm/removing-running-kernel-2.6.32-5-kirkwood: true
Reply to: