Package: linux-2.6
Version: 3.1.8-2
Severity: normal
Dear Debian folks,
suspending and resuming a lot, it happens once to me, that the network
device did not come back correctly.
[55463.662649] r8169 0000:02:00.0: eth0: link down
[55463.662669] r8169 0000:02:00.0: eth0: link down
[55463.663980] ADDRCONF(NETDEV_UP): eth0: link is not ready
I had to unplug the network cable and plug it in again.
[55579.968121] r8169 0000:02:00.0: eth0: link down
[55581.637656] r8169 0000:02:00.0: eth0: link up
[55581.638481] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Normally the resume process looks like this, that means the link is
*automatically* up after two seconds.
[69302.909251] r8169 0000:02:00.0: eth0: link down
[69302.909270] r8169 0000:02:00.0: eth0: link down
[69302.910529] ADDRCONF(NETDEV_UP): eth0: link is not ready
[69304.585998] r8169 0000:02:00.0: eth0: link up
[69304.586445] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Hints for debugging would be great.
Thanks,
Paul
$ dmesg # after resume
[…]
[44540.458145] i2c i2c-4: sendbytes: NAK bailout.
[55413.314370] ata1: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[55413.314378] ata1: SError: { HostInt }
[55413.314385] ata1: hard resetting link
[55413.804040] ata1: softreset failed (device not ready)
[55413.804054] ata1: applying PMP SRST workaround and retrying
[55413.976119] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[55413.982660] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[55413.988624] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[55413.988631] ata1.00: configured for UDMA/100
[55414.004055] ata1: EH complete
[55417.669609] PM: Syncing filesystems ... done.
[55418.038042] PM: Preparing system for mem sleep
[55418.241813] Freezing user space processes ... (elapsed 0.27 seconds) done.
[55418.512040] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[55418.528037] PM: Entering mem sleep
[55418.528062] Suspending console(s) (use no_console_suspend to debug)
[55418.528498] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[55418.528660] sd 0:0:0:0: [sda] Stopping disk
[55418.538829] i8042 aux 00:0a: wake-up capability disabled by ACPI
[55418.538912] parport_pc 00:09: disabled
[55418.538986] serial 00:08: disabled
[55418.539011] serial 00:08: wake-up capability disabled by ACPI
[55418.540082] ehci_hcd 0000:00:13.5: PCI INT D disabled
[55418.540094] ohci_hcd 0000:00:13.4: PCI INT C disabled
[55418.540106] ohci_hcd 0000:00:13.3: PCI INT B disabled
[55418.540117] ohci_hcd 0000:00:13.2: PCI INT C disabled
[55418.540128] ohci_hcd 0000:00:13.1: PCI INT B disabled
[55418.540254] pata_atiixp 0000:00:14.1: PCI INT A disabled
[55418.604094] ohci_hcd 0000:00:13.0: PCI INT A disabled
[55418.640114] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[55418.799155] radeon 0000:01:05.0: PCI INT A disabled
[55418.966650] ahci 0000:00:12.0: PCI INT A disabled
[55418.966679] PM: suspend of devices complete after 438.412 msecs
[55418.966878] r8169 0000:02:00.0: PME# enabled
[55418.966894] pcieport 0000:00:07.0: wake-up capability enabled by ACPI
[55418.996204] PM: late suspend of devices complete after 29.519 msecs
[55418.996289] ACPI: Preparing to enter system sleep state S3
[55418.996393] PM: Saving platform NVS memory
[55418.996448] Disabling non-boot CPUs ...
[55419.184016] CPU 1 is now offline
[55419.184831] ACPI: Low-level resume complete
[55419.184831] PM: Restoring platform NVS memory
[55419.184831] Enabling non-boot CPUs ...
[55419.184831] Booting Node 0 Processor 1 APIC 0x1
[55419.184831] smpboot cpu 1: start_ip = 9a000
[55419.082905] Calibrating delay loop (skipped) already calibrated this CPU
[55419.196721] NMI watchdog enabled, takes one hw-pmu counter.
[55419.196914] CPU1 is up
[55419.197227] ACPI: Waking up from system sleep state S3
[55419.197384] pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[55419.197419] pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[55419.197463] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100)
[55419.197483] ahci 0000:00:12.0: set SATA to AHCI mode
[55419.197508] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[55419.197538] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[55419.197568] ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[55419.197597] ohci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[55419.197627] ohci_hcd 0000:00:13.4: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[55419.197664] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[55419.198129] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[55419.198252] r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[55419.198269] r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xfdfff004)
[55419.198276] r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xdc01)
[55419.198281] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[55419.198288] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[55419.198425] PM: early resume of devices complete after 1.077 msecs
[55419.198558] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[55419.198628] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[55419.198654] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[55419.198736] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[55419.198755] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[55419.198816] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[55419.198829] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[55419.198967] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[55419.199050] pcieport 0000:00:07.0: wake-up capability disabled by ACPI
[55419.199056] r8169 0000:02:00.0: PME# disabled
[55419.199785] sd 0:0:0:0: [sda] Starting disk
[55419.200025] Switched to NOHz mode on CPU #1
[55419.200565] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[55419.200589] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[55419.201779] serial 00:08: activated
[55419.202198] parport_pc 00:09: activated
[55419.301077] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[55419.308737] radeon 0000:01:05.0: WB enabled
[55419.308753] [drm] radeon: ring at 0x0000000080001000
[55419.308771] [drm] ring test succeeded in 1 usecs
[55419.308783] [drm] ib test succeeded in 0 usecs
[55419.364489] ata5.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[55419.364494] ata5.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[55419.400484] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[55419.400489] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[55419.408443] ata5.00: configured for UDMA/33
[55419.424437] ata5.01: configured for UDMA/33
[55419.516045] ata4: SATA link down (SStatus 0 SControl 300)
[55419.516075] ata3: SATA link down (SStatus 0 SControl 300)
[55419.516107] ata2: SATA link down (SStatus 0 SControl 300)
[55419.636029] usb 2-1: reset low speed USB device number 2 using ohci_hcd
[55420.076034] usb 2-2: reset full speed USB device number 3 using ohci_hcd
[55429.208019] ata1: softreset failed (device not ready)
[55433.004017] ata1: softreset failed (device not ready)
[55433.004021] ata1: applying PMP SRST workaround and retrying
[55433.176028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[55433.181689] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[55433.187735] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[55433.187738] ata1.00: configured for UDMA/100
[55433.237645] PM: resume of devices complete after 14039.156 msecs
[55433.237917] PM: Finishing wakeup.
[55433.237918] Restarting tasks ... done.
[55463.662649] r8169 0000:02:00.0: eth0: link down
[55463.662669] r8169 0000:02:00.0: eth0: link down
[55463.663980] ADDRCONF(NETDEV_UP): eth0: link is not ready
[55579.968121] r8169 0000:02:00.0: eth0: link down
[55581.637656] r8169 0000:02:00.0: eth0: link up
[55581.638481] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
-- Package-specific info:
** Version:
Linux version 3.1.0-1-amd64 (Debian 3.1.8-2) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Tue Jan 10 06:25:07 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/joe-root ro quiet
** Not tainted
** Kernel log:
[81124.576599] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[81124.576781] sd 0:0:0:0: [sda] Stopping disk
[81124.586548] i8042 aux 00:0a: wake-up capability disabled by ACPI
[81124.586631] parport_pc 00:09: disabled
[81124.586706] serial 00:08: disabled
[81124.586732] serial 00:08: wake-up capability disabled by ACPI
[81124.587605] ehci_hcd 0000:00:13.5: PCI INT D disabled
[81124.587617] ohci_hcd 0000:00:13.4: PCI INT C disabled
[81124.587630] ohci_hcd 0000:00:13.3: PCI INT B disabled
[81124.587642] ohci_hcd 0000:00:13.2: PCI INT C disabled
[81124.587653] ohci_hcd 0000:00:13.1: PCI INT B disabled
[81124.587785] pata_atiixp 0000:00:14.1: PCI INT A disabled
[81124.648098] ohci_hcd 0000:00:13.0: PCI INT A disabled
[81124.688118] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[81124.785825] radeon 0000:01:05.0: PCI INT A disabled
[81125.015388] ahci 0000:00:12.0: PCI INT A disabled
[81125.015416] PM: suspend of devices complete after 439.145 msecs
[81125.015611] r8169 0000:02:00.0: PME# enabled
[81125.015627] pcieport 0000:00:07.0: wake-up capability enabled by ACPI
[81125.044203] PM: late suspend of devices complete after 28.783 msecs
[81125.044290] ACPI: Preparing to enter system sleep state S3
[81125.044394] PM: Saving platform NVS memory
[81125.044448] Disabling non-boot CPUs ...
[81125.088871] CPU 1 is now offline
[81125.089756] ACPI: Low-level resume complete
[81125.089756] PM: Restoring platform NVS memory
[81125.089756] Enabling non-boot CPUs ...
[81125.089756] Booting Node 0 Processor 1 APIC 0x1
[81125.089756] smpboot cpu 1: start_ip = 9a000
[81125.088844] Calibrating delay loop (skipped) already calibrated this CPU
[81125.104021] Switched to NOHz mode on CPU #1
[81125.219670] NMI watchdog enabled, takes one hw-pmu counter.
[81125.219911] CPU1 is up
[81125.220330] ACPI: Waking up from system sleep state S3
[81125.220474] pci 0000:00:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[81125.220502] pcieport 0000:00:07.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[81125.220541] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100)
[81125.220561] ahci 0000:00:12.0: set SATA to AHCI mode
[81125.220585] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[81125.220614] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[81125.220642] ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[81125.220671] ohci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[81125.220699] ohci_hcd 0000:00:13.4: restoring config space at offset 0x1 (was 0x2a00007, writing 0x2a00003)
[81125.220734] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[81125.220767] piix4_smbus 0000:00:14.0: restoring config space at offset 0x5 (was 0x0, writing 0xffffffff)
[81125.220776] piix4_smbus 0000:00:14.0: restoring config space at offset 0x1 (was 0x2300403, writing 0xffffffff)
[81125.220834] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[81125.220938] r8169 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[81125.220955] r8169 0000:02:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xfdfff004)
[81125.220962] r8169 0000:02:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xdc01)
[81125.220968] r8169 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[81125.220976] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[81125.221111] PM: early resume of devices complete after 0.670 msecs
[81125.221233] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[81125.221273] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[81125.221309] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[81125.221332] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[81125.221337] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[81125.221360] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[81125.221382] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[81125.221411] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[81125.221434] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[81125.221481] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[81125.221981] pcieport 0000:00:07.0: wake-up capability disabled by ACPI
[81125.221988] r8169 0000:02:00.0: PME# disabled
[81125.222082] sd 0:0:0:0: [sda] Starting disk
[81125.224409] serial 00:08: activated
[81125.224815] parport_pc 00:09: activated
[81125.325116] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[81125.332781] radeon 0000:01:05.0: WB enabled
[81125.332819] [drm] radeon: ring at 0x0000000080001000
[81125.332837] [drm] ring test succeeded in 1 usecs
[81125.332857] [drm] ib test succeeded in 0 usecs
[81125.388485] ata5.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[81125.388491] ata5.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[81125.402451] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[81125.402456] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[81125.408557] ata5.00: configured for UDMA/33
[81125.424418] ata5.01: configured for UDMA/33
[81125.540042] ata3: SATA link down (SStatus 0 SControl 300)
[81125.540073] ata2: SATA link down (SStatus 0 SControl 300)
[81125.540103] ata4: SATA link down (SStatus 0 SControl 300)
[81125.660037] usb 2-1: reset low speed USB device number 2 using ohci_hcd
[81126.100036] usb 2-2: reset full speed USB device number 3 using ohci_hcd
[81135.232018] ata1: softreset failed (device not ready)
[81138.748017] ata1: softreset failed (device not ready)
[81138.748021] ata1: applying PMP SRST workaround and retrying
[81138.920028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[81138.926489] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[81138.932452] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[81138.932456] ata1.00: configured for UDMA/100
[81138.983486] PM: resume of devices complete after 13762.309 msecs
[81138.983764] PM: Finishing wakeup.
[81138.983766] Restarting tasks ... done.
[81196.764877] r8169 0000:02:00.0: eth0: link down
[81196.764899] r8169 0000:02:00.0: eth0: link down
[81196.766149] ADDRCONF(NETDEV_UP): eth0: link is not ready
[81198.431155] r8169 0000:02:00.0: eth0: link up
[81198.431996] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[81208.672046] eth0: no IPv6 routers present
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies, LTD
bios_version: ASUS M2A-VM ACPI BIOS Revision 1604
board_vendor: ASUSTeK Computer INC.
board_name: M2A-VM
board_version: 1.XX
** Loaded modules:
binfmt_misc
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
powernow_k8
mperf
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
reiserfs
xfs
fuse
kvm_amd
kvm
loop
firewire_sbp2
firewire_core
crc_itu_t
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
radeon
snd_hwdep
snd_pcm_oss
snd_mixer_oss
ttm
snd_pcm
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
drm_kms_helper
snd_seq
drm
snd_timer
snd_seq_device
snd
psmouse
soundcore
evdev
snd_page_alloc
sp5100_tco
i2c_algo_bit
i2c_piix4
k8temp
power_supply
i2c_core
parport_pc
parport
edac_core
edac_mce_amd
serio_raw
asus_atk0110
processor
button
shpchp
pci_hotplug
ext3
jbd
mbcache
sha256_generic
cryptd
aes_x86_64
aes_generic
cbc
dm_crypt
dm_mod
raid1
md_mod
usbhid
hid
sd_mod
crc_t10dif
sr_mod
cdrom
ata_generic
pata_atiixp
thermal
ahci
libahci
fan
thermal_sys
ohci_hcd
libata
ehci_hcd
scsi_mod
usbcore
r8169
mii
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fda00000-fdbfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at fc00 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f400 [size=8]
Region 3: I/O ports at f000 [size=4]
Region 4: I/O ports at ec00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:13.0 USB controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.4 USB controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at e400 [size=16]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon X1200 Series] [1002:791e] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at fdbf0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at cc00 [size=256]
Region 5: Memory at fda00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at dc00 [size=256]
Region 2: Memory at fdfff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (x86_64)
Kernel: Linux 3.1.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.1.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.1.0-1-amd64 recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-24
Versions of packages linux-image-3.1.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.1 <none>
Versions of packages linux-image-3.1.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux 0.34
pn firmware-linux-nonfree 0.34
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information excluded
Attachment:
signature.asc
Description: This is a digitally signed message part