Bug#652276: linux-image-3.1.0-1-686-pae: Odd end of system initialization : sometimes console switch on tty other than tty1
Package: linux-2.6
Version: 3.1.1-1
Severity: normal
Tags: upstream
Dear Maintainer,
At the end of system initialization, the console on which it leads is not always
tty1. Often tty2, tty3, and tty4. This is random but not systematic. I have not
noticed any special connection with upgrade. I use console-tools package. This
bug is not serious but it is strange and it may hide another problem.
We've had talks about this with Jonathan Nieder, and he had identified it with a
similar kernel bug :
http://thread.gmane.org/gmane.linux.kernel/914150
I send a report like he suggest.
Regards,
-- Package-specific info:
** Version:
Linux version 3.1.0-1-686-pae (Debian 3.1.1-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:24:20 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=fea5336a-726d-4e2c-a0cc-61b633ddcbaa ro drm.debug=0x86
** Not tainted
** Kernel log:
[ 2.580754] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.592102] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.592119] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.603145] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.614145] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 2.625079] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.635974] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.646802] usb usb4: Product: UHCI Host Controller
[ 2.657533] usb usb4: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 2.668374] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.679889] hub 4-0:1.0: USB hub found
[ 2.690758] hub 4-0:1.0: 2 ports detected
[ 2.701661] usb 1-4: new high speed USB device number 3 using ehci_hcd
[ 2.861923] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[ 2.873092] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.884091] usb 1-4: Product: 802.11 n WLAN
[ 2.894940] usb 1-4: Manufacturer: Ralink
[ 2.905636] usb 1-4: SerialNumber: 1.0
[ 3.028109] usb 2-2: new full speed USB device number 2 using uhci_hcd
[ 3.209205] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
[ 3.220044] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.231006] usb 2-2: Product: Generic USB Hub
[ 3.241909] usb 2-2: Manufacturer: ALCOR
[ 3.256355] hub 2-2:1.0: USB hub found
[ 3.269179] hub 2-2:1.0: 4 ports detected
[ 3.561210] usb 2-2.1: new low speed USB device number 3 using uhci_hcd
[ 3.781209] usb 2-2.1: New USB device found, idVendor=1e54, idProduct=2030
[ 3.792253] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.803323] usb 2-2.1: Product: USB Keyboard
[ 3.814203] usb 2-2.1: Manufacturer: TypeMatrix.com
[ 3.884257] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input0
[ 3.896078] generic-usb 0003:1E54:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input0
[ 3.921191] usb 2-2.3: new low speed USB device number 4 using uhci_hcd
[ 3.997208] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input1
[ 4.010320] generic-usb 0003:1E54:2030.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input1
[ 4.035949] usbcore: registered new interface driver usbhid
[ 4.049112] usbhid: USB HID core driver
[ 4.119208] usb 2-2.3: New USB device found, idVendor=045e, idProduct=0040
[ 4.132337] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.145417] usb 2-2.3: Product: Microsoft Wheel Mouse Optical®
[ 4.158369] usb 2-2.3: Manufacturer: Microsoft
[ 4.188999] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
[ 4.216337] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.0-2.3/input0
[ 4.288147] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 4.345921] ata1.00: ATA-8: TOSHIBA MK1235GSL, PV010J, max UDMA/100
[ 4.360351] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.375732] ata1.00: configured for UDMA/100
[ 4.390625] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1235GS PV01 PQ: 0 ANSI: 5
[ 6.484124] ata2: SATA link down (SStatus 0 SControl 0)
[ 6.718012] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 6.733453] sd 0:0:0:0: [sda] Write Protect is off
[ 6.748199] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.748317] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.814684] sda: sda1 sda2 < sda5 >
[ 6.831309] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.418925] PM: Starting manual resume from disk
[ 7.434222] PM: Hibernation image partition 8:5 present
[ 7.434232] PM: Looking for hibernation image.
[ 7.434659] PM: Image not found (code -22)
[ 7.434666] PM: Hibernation image not present or could not be loaded.
[ 7.540654] kjournald starting. Commit interval 5 seconds
[ 7.541104] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.392415] udevd[224]: starting version 175
[ 11.546291] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 11.586055] ACPI: Sleep Button [SLPB]
[ 11.610466] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 11.632593] ACPI: Power Button [PWRB]
[ 11.653245] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 11.670285] ACPI: Lid Switch [LID]
[ 11.878742] ACPI: acpi_idle yielding to intel_idle
[ 11.917003] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 12.739146] Error: Driver 'pcspkr' is already registered, aborting...
[ 13.148457] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.165202] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 13.209180] cfg80211: Calling CRDA to update world regulatory domain
[ 13.367470] hda_codec: ALC888: BIOS auto-probing.
[ 13.383376] hda_codec: ALC888: SKU not ready 0x00000100
[ 13.403557] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 13.426871] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.476165] usb 1-4: reset high speed USB device number 3 using ehci_hcd
[ 13.824886] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.827196] Registered led device: rt2800usb-phy0::radio
[ 13.827315] Registered led device: rt2800usb-phy0::assoc
[ 13.827455] Registered led device: rt2800usb-phy0::quality
[ 13.827860] usbcore: registered new interface driver rt2800usb
[ 15.766140] Adding 2650688k swap on /dev/sda5. Priority:-1 extents:1 across:2650688k
[ 16.228174] EXT3-fs (sda1): using internal journal
[ 16.415246] loop: module loaded
[ 19.641378] r8169 0000:01:00.0: eth0: link down
[ 19.656047] r8169 0000:01:00.0: eth0: link down
[ 19.669946] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.908119] fuse init (API version 7.17)
[ 21.401898] r8169 0000:01:00.0: eth0: link up
[ 21.414587] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.746355] lp: driver loaded but no devices found
[ 24.063818] ppdev: user-space parallel port driver
[ 24.380396] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[ 24.393550] parport0: irq 7 detected
[ 24.502010] lp0: using parport0 (polling).
[ 32.128071] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
acpi_cpufreq 12807 1
mperf 12421 1 acpi_cpufreq
cpufreq_stats 12762 0
cpufreq_conservative 12987 0
cpufreq_userspace 12520 0
cpufreq_powersave 12422 0
parport_pc 22036 1
ppdev 12651 0
lp 12797 2
parport 31254 3 parport_pc,ppdev,lp
binfmt_misc 12813 1
fuse 52153 1
loop 17804 0
kvm_intel 112185 0
kvm 230097 1 kvm_intel
arc4 12418 2
snd_hda_codec_realtek 196824 1
rt2800usb 17546 0
rt2800lib 39000 1 rt2800usb
crc_ccitt 12331 1 rt2800lib
rt2x00usb 13384 1 rt2800usb
rt2x00lib 29031 3 rt2800usb,rt2800lib,rt2x00usb
mac80211 166120 3 rt2800lib,rt2x00usb,rt2x00lib
cfg80211 113073 2 rt2x00lib,mac80211
rfkill 18516 1 cfg80211
snd_hda_intel 21725 0
joydev 17010 0
snd_hda_codec 58429 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 12943 1 snd_hda_codec
snd_pcm 53258 2 snd_hda_intel,snd_hda_codec
snd_timer 22356 1 snd_pcm
snd 38551 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
i2c_isch 12482 0
soundcore 12921 1 snd
video 17412 0
i2c_core 19116 1 i2c_isch
pcspkr 12515 0
evdev 17225 5
processor 27389 1 acpi_cpufreq
lpc_sch 12426 0
thermal_sys 17752 2 video,processor
snd_page_alloc 12867 2 snd_hda_intel,snd_pcm
psmouse 46143 0
mfd_core 12537 1 lpc_sch
button 12817 0
serio_raw 12738 0
ext3 138178 1
jbd 47307 1 ext3
mbcache 12897 1 ext3
sd_mod 35425 3
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
usbhid 31523 0
hid 60120 1 usbhid
uhci_hcd 22337 0
pata_sch 12454 0
sata_sil24 13284 2
libata 124945 3 ata_generic,pata_sch,sata_sil24
ehci_hcd 35509 0
scsi_mod 135128 2 sd_mod,libata
usbcore 100005 6 rt2800usb,rt2x00usb,usbhid,uhci_hcd,ehci_hcd
r8169 37301 0
mii 12595 1 r8169
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH Poulsbo) [8086:8100] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe980000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at c880 [size=8]
Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=256M]
Region 3: Memory at fe940000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller [8086:811b] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe938000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 [8086:8110] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: cff00000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 2 [8086:8112] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 80000000-801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 [8086:8114] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 [8086:8115] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 [8086:8116] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 [8086:8117] (rev 07) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe937c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119] (rev 07)
Subsystem: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: lpc_sch
00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller [8086:811a] (rev 07) (prog-if 80 [Master])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: pata_sch
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E Adapter [Trendnet] [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at dd00 [size=256]
Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at cfff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller [1095:3132] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller [1095:3132]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at febffc00 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Region 4: I/O ports at e880 [size=128]
Expansion ROM at feb00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil24
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 002 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 002 Device 003: ID 1e54:2030 TypeMatrix 2030 USB Keyboard
Bus 002 Device 004: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (650, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.1.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.1.0-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.1.0-1-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-21
Versions of packages linux-image-3.1.0-1-686-pae suggests:
ii grub-pc 1.99-14
ii linux-doc-3.1 3.1.1-1
Versions of packages linux-image-3.1.0-1-686-pae is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic <none>
pn firmware-ralink 0.34
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.1.0-1-686-pae/prerm/removing-running-kernel-3.1.0-1-686-pae: true
linux-image-3.1.0-1-686-pae/postinst/missing-firmware-3.1.0-1-686-pae:
linux-image-3.1.0-1-686-pae/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-686-pae/postinst/depmod-error-initrd-3.1.0-1-686-pae: false
*** Detailled dmesg
*** /home/lkppo/debian_bug/3dmesg-3.1.0-1-686-pae
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1-686-pae (Debian 3.1.1-1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Mon Nov 14 08:24:20 UTC 2011
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[ 0.000000] BIOS-e820: 000000003f680000 - 000000003f690000 (reserved)
[ 0.000000] BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f69e000 - 000000003f6d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e0000 (reserved)
[ 0.000000] BIOS-e820: 000000003f6e8000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/19/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36d50000 - 376a0000
[ 0.000000] ACPI: RSDP 000f9080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 3f690100 0005C (v01 111909 XSDT1533 20091119 MSFT 00000097)
[ 0.000000] ACPI: FACP 3f690290 000F4 (v04 111909 FACP1533 20091119 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f690430 03D87 (v02 7652I 7652I102 00000102 INTL 20051117)
[ 0.000000] ACPI: FACS 3f69e000 00040
[ 0.000000] ACPI: APIC 3f690390 0005C (v02 111909 APIC1533 20091119 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f6903f0 0003C (v01 111909 OEMMCFG 20091119 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f69e040 0012C (v01 111909 OEMB1533 20091119 MSFT 00000097)
[ 0.000000] ACPI: HPET 3f6941c0 00038 (v01 111909 OEMHPET 20091119 MSFT 00000097)
[ 0.000000] ACPI: GSCI 3f69e170 02024 (v01 111909 GMCHSCI 20091119 MSFT 00000097)
[ 0.000000] ACPI: SSDT 3f6a0470 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 124MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003f680
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003f680
[ 0.000000] On node 0 totalpages: 259597
[ 0.000000] free_area_init_node: node 0, pgdat c1436800, node_mem_map f6560200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 250 pages used for memmap
[ 0.000000] HighMem zone: 31624 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6200000 s31744 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s31744 r0 d21504 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257567
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=fea5336a-726d-4e2c-a0cc-61b633ddcbaa ro drm.debug=0x86
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003f680)
[ 0.000000] Memory: 1014408k/1038848k available (2765k kernel code, 23980k reserved, 1578k data, 404k init, 127496k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc143e000 - 0xc14a3000 ( 404 kB)
[ 0.000000] .data : 0xc12b34ec - 0xc143dec0 (1578 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b34ec (2765 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1097.282 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2194.56 BogoMIPS (lpj=4389128)
[ 0.004037] pid_max: default: 32768 minimum: 301
[ 0.004203] Security Framework initialized
[ 0.004293] Mount-cache hash table entries: 512
[ 0.008276] Initializing cgroup subsys cpuacct
[ 0.008366] Initializing cgroup subsys memory
[ 0.008421] Initializing cgroup subsys devices
[ 0.008437] Initializing cgroup subsys freezer
[ 0.008451] Initializing cgroup subsys net_cls
[ 0.008466] Initializing cgroup subsys blkio
[ 0.008561] Disabled fast string operations
[ 0.008581] CPU: Physical Processor ID: 0
[ 0.008594] CPU: Processor Core ID: 0
[ 0.008608] mce: CPU supports 5 MCE banks
[ 0.008634] CPU0: Thermal monitoring enabled (TM1)
[ 0.008652] using mwait in idle threads.
[ 0.009457] ACPI: Core revision 20110623
[ 0.020200] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020623] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063159] CPU0: Intel(R) Atom(TM) CPU Z510 @ 1.10GHz stepping 02
[ 0.064003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.064003] ... version: 3
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] CPU 1 irqstacks, hard=f5cb4000 soft=f5cb6000
[ 0.064003] Booting Node 0, Processors #1 Ok.
[ 0.064003] smpboot cpu 1: start_ip = 99000
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.156097] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156231] Brought up 2 CPUs
[ 0.156253] Total of 2 processors activated (4389.09 BogoMIPS).
[ 0.157353] devtmpfs: initialized
[ 0.157353] PM: Registering ACPI NVS region at 3f69e000 (204800 bytes)
[ 0.157353] print_constraints: dummy:
[ 0.157353] NET: Registered protocol family 16
[ 0.160242] ACPI: bus type pci registered
[ 0.160662] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.160689] PCI: not using MMCONFIG
[ 0.161009] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.161116] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.161131] PCI: Using configuration type 1 for base access
[ 0.162627] bio: create slab <bio-0> at 0
[ 0.162627] ACPI: Added _OSI(Module Device)
[ 0.162627] ACPI: Added _OSI(Processor Device)
[ 0.162627] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.162627] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.166295] ACPI: EC: Look up EC in DSDT
[ 0.169251] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.174129] ACPI Warning: Incorrect checksum in table [OEMB] - 0x47, should be 0x98 (20110623/tbutils-314)
[ 0.175131] ACPI: SSDT 3f6a0270 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.175848] ACPI: Dynamic OEM Table Load:
[ 0.175874] ACPI: SSDT (null) 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.176811] ACPI: SSDT 3f6a01a0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.177499] ACPI: Dynamic OEM Table Load:
[ 0.177519] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.178055] ACPI: Interpreter enabled
[ 0.178084] ACPI: (supports S0 S3 S4 S5)
[ 0.178164] ACPI: Using IOAPIC for interrupt routing
[ 0.178264] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.182299] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.182324] PCI: Using MMCONFIG for extended config space
[ 0.183620] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.195258] ACPI: No dock devices found.
[ 0.195279] HEST: Table not found.
[ 0.195300] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.195652] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.196406] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.196429] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.196448] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.196470] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.196492] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0xdfffffff]
[ 0.196513] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.196546] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000ce800-0x000d27ff])
[ 0.196606] pci 0000:00:00.0: [8086:8100] type 0 class 0x000600
[ 0.196723] pci 0000:00:02.0: [8086:8108] type 0 class 0x000300
[ 0.196759] pci 0000:00:02.0: reg 10: [mem 0xfe980000-0xfe9fffff]
[ 0.196780] pci 0000:00:02.0: reg 14: [io 0xc880-0xc887]
[ 0.196799] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff]
[ 0.196819] pci 0000:00:02.0: reg 1c: [mem 0xfe940000-0xfe97ffff]
[ 0.196973] pci 0000:00:1b.0: [8086:811b] type 0 class 0x000403
[ 0.197006] pci 0000:00:1b.0: reg 10: [mem 0xfe938000-0xfe93bfff 64bit]
[ 0.197096] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 0.197108] pci 0000:00:1b.0: PME# disabled
[ 0.197151] pci 0000:00:1c.0: [8086:8110] type 1 class 0x000604
[ 0.197240] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.197251] pci 0000:00:1c.0: PME# disabled
[ 0.197297] pci 0000:00:1c.1: [8086:8112] type 1 class 0x000604
[ 0.197385] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.197396] pci 0000:00:1c.1: PME# disabled
[ 0.197443] pci 0000:00:1d.0: [8086:8114] type 0 class 0x000c03
[ 0.197505] pci 0000:00:1d.0: reg 20: [io 0xc480-0xc49f]
[ 0.197564] pci 0000:00:1d.1: [8086:8115] type 0 class 0x000c03
[ 0.197628] pci 0000:00:1d.1: reg 20: [io 0xc080-0xc09f]
[ 0.197685] pci 0000:00:1d.2: [8086:8116] type 0 class 0x000c03
[ 0.197748] pci 0000:00:1d.2: reg 20: [io 0xb880-0xb89f]
[ 0.197828] pci 0000:00:1d.7: [8086:8117] type 0 class 0x000c03
[ 0.197871] pci 0000:00:1d.7: reg 10: [mem 0xfe937c00-0xfe937fff]
[ 0.198013] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.198026] pci 0000:00:1d.7: PME# disabled
[ 0.198065] pci 0000:00:1f.0: [8086:8119] type 0 class 0x000601
[ 0.198182] pci 0000:00:1f.1: [8086:811a] type 0 class 0x000101
[ 0.198248] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.198391] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.198423] pci 0000:01:00.0: reg 10: [io 0xdd00-0xddff]
[ 0.198470] pci 0000:01:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit]
[ 0.198503] pci 0000:01:00.0: reg 20: [mem 0xcfff0000-0xcfffffff 64bit pref]
[ 0.198528] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.198591] pci 0000:01:00.0: supports D1 D2
[ 0.198600] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.198612] pci 0000:01:00.0: PME# disabled
[ 0.204055] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.204077] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.204089] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.204102] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff pref]
[ 0.204223] pci 0000:02:00.0: [1095:3132] type 0 class 0x000180
[ 0.204269] pci 0000:02:00.0: reg 10: [mem 0xfebffc00-0xfebffc7f 64bit]
[ 0.204305] pci 0000:02:00.0: reg 18: [mem 0xfebf8000-0xfebfbfff 64bit]
[ 0.204331] pci 0000:02:00.0: reg 20: [io 0xe880-0xe8ff]
[ 0.204373] pci 0000:02:00.0: reg 30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.204437] pci 0000:02:00.0: supports D1 D2
[ 0.204472] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.204512] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.204531] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.204543] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.204570] pci_bus 0000:00: on NUMA node 0
[ 0.204583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.204982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP4._PRT]
[ 0.205120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP5._PRT]
[ 0.205244] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.205267] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.205287] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.217162] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.217374] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.217576] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.217778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.217980] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.218191] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.218402] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.218612] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.218944] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.218944] vgaarb: loaded
[ 0.218944] vgaarb: bridge control possible 0000:00:02.0
[ 0.218944] PCI: Using ACPI for IRQ routing
[ 0.218944] PCI: pci_cache_line_size set to 64 bytes
[ 0.218944] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.218944] reserve RAM buffer: 000000003f680000 - 000000003fffffff
[ 0.218944] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.218944] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.218944] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.224084] Switching to clocksource hpet
[ 0.227741] Switched to NOHz mode on CPU #0
[ 0.227848] Switched to NOHz mode on CPU #1
[ 0.229621] pnp: PnP ACPI init
[ 0.229693] ACPI: bus type pnp registered
[ 0.230131] pnp 00:00: [bus 00-ff]
[ 0.230143] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.230153] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.230162] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.230172] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.230181] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.230191] pnp 00:00: [mem 0x3f800000-0xdfffffff window]
[ 0.230201] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.230369] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.230684] pnp 00:01: [mem 0x40000000-0x7fffffff]
[ 0.230695] pnp 00:01: [mem 0x3f800000-0x3fffffff]
[ 0.230844] system 00:01: [mem 0x40000000-0x7fffffff] has been reserved
[ 0.230868] system 00:01: [mem 0x3f800000-0x3fffffff] has been reserved
[ 0.230889] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230998] pnp 00:02: [io 0x0070-0x0071]
[ 0.231028] pnp 00:02: [irq 8]
[ 0.231126] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.231305] pnp 00:03: [io 0x0061]
[ 0.231425] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.231466] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.231484] pnp 00:04: [irq 13]
[ 0.231585] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.231932] pnp 00:05: [io 0x0000-0xffffffffffffffff disabled]
[ 0.231948] pnp 00:05: [io 0x0a00-0x0a0f]
[ 0.231957] pnp 00:05: [io 0x0a10-0x0a1f]
[ 0.232161] system 00:05: [io 0x0a00-0x0a0f] has been reserved
[ 0.232190] system 00:05: [io 0x0a10-0x0a1f] has been reserved
[ 0.232211] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232628] pnp 00:06: [io 0x0010-0x001f]
[ 0.232638] pnp 00:06: [io 0x0022-0x003f]
[ 0.232647] pnp 00:06: [io 0x0044-0x005f]
[ 0.232655] pnp 00:06: [io 0x0063]
[ 0.232662] pnp 00:06: [io 0x0065]
[ 0.232670] pnp 00:06: [io 0x0067-0x006f]
[ 0.232678] pnp 00:06: [io 0x0072-0x007f]
[ 0.232686] pnp 00:06: [io 0x0080]
[ 0.232694] pnp 00:06: [io 0x0084-0x0086]
[ 0.232702] pnp 00:06: [io 0x0088]
[ 0.232710] pnp 00:06: [io 0x008c-0x008e]
[ 0.232718] pnp 00:06: [io 0x0090-0x009f]
[ 0.232726] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.232735] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.232743] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.232751] pnp 00:06: [io 0x0900-0x09f3]
[ 0.232759] pnp 00:06: [io 0x0400-0x043f]
[ 0.232768] pnp 00:06: [io 0x0480-0x04bf]
[ 0.232777] pnp 00:06: [mem 0xf0000000-0xf0003fff]
[ 0.232949] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.232971] system 00:06: [io 0x0900-0x09f3] has been reserved
[ 0.232990] system 00:06: [io 0x0400-0x043f] has been reserved
[ 0.233009] system 00:06: [io 0x0480-0x04bf] has been reserved
[ 0.233029] system 00:06: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.233049] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.233138] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.233239] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.233433] pnp 00:08: [mem 0xff800000-0xffbfffff]
[ 0.233443] pnp 00:08: [mem 0xffc00000-0xffffffff]
[ 0.233551] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.233725] pnp 00:09: [mem 0xffc00000-0xffbfffff disabled]
[ 0.233863] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.234205] pnp 00:0a: [io 0x0060]
[ 0.234214] pnp 00:0a: [io 0x0064]
[ 0.234224] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.234233] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.234377] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.234401] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.234422] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.234560] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.234704] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.234727] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.235254] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.235265] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.235274] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.235283] pnp 00:0c: [mem 0x00100000-0x3f7fffff]
[ 0.235293] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.235436] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.235459] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.235480] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.235500] system 00:0c: [mem 0x00100000-0x3f7fffff] could not be reserved
[ 0.235521] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.236059] pnp: PnP ACPI: found 13 devices
[ 0.236075] ACPI: ACPI bus type pnp unregistered
[ 0.236094] PnPBIOS: Disabled by ACPI PNP
[ 0.280384] PCI: max bus depth: 1 pci_try_num: 2
[ 0.280439] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff pref]
[ 0.280468] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.280487] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.280509] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.280530] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff pref]
[ 0.280558] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.280575] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.280597] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.280618] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff pref]
[ 0.280679] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.280702] pci 0000:00:1c.0: setting latency timer to 64
[ 0.280727] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.280748] pci 0000:00:1c.1: setting latency timer to 64
[ 0.280760] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.280769] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.280779] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.280789] pci_bus 0000:00: resource 7 [mem 0x3f800000-0xdfffffff]
[ 0.280798] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff]
[ 0.280808] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.280818] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.280828] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff pref]
[ 0.280838] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.280847] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.280857] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff pref]
[ 0.281064] NET: Registered protocol family 2
[ 0.281385] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.282398] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.283914] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.284779] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.284810] TCP reno registered
[ 0.284839] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.284880] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.285463] NET: Registered protocol family 1
[ 0.285539] pci 0000:00:02.0: Boot video device
[ 0.285713] PCI: CLS 32 bytes, default 64
[ 0.285889] Unpacking initramfs...
[ 1.000820] Freeing initrd memory: 9536k freed
[ 1.018727] audit: initializing netlink socket (disabled)
[ 1.018785] type=2000 audit(1323976540.012:1): initialized
[ 1.065130] highmem bounce pool size: 64 pages
[ 1.065162] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.072912] VFS: Disk quotas dquot_6.5.2
[ 1.073201] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.073594] msgmni has been set to 1750
[ 1.074240] alg: No test for stdrng (krng)
[ 1.074375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.074400] io scheduler noop registered
[ 1.074413] io scheduler deadline registered
[ 1.074471] io scheduler cfq registered (default)
[ 1.075117] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 1.075135] vesafb: scrolling: redraw
[ 1.075152] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.075847] vesafb: framebuffer at 0x3f800000, mapped to 0xf8280000, using 1536k, total 1536k
[ 1.104897] Console: switching to colour frame buffer device 128x48
[ 1.133794] fb0: VESA VGA frame buffer device
[ 1.134120] intel_idle: MWAIT substates: 0x3020220
[ 1.134142] intel_idle: v0.4 model 0x1C
[ 1.134149] intel_idle: lapic_timer_reliable_states 0x2
[ 1.134191] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.134724] ERST: Table is not found!
[ 1.134933] GHES: HEST is not enabled!
[ 1.135186] isapnp: Scanning for PnP cards...
[ 1.447082] isapnp: No Plug & Play device found
[ 1.447627] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.468684] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.492639] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.497253] Linux agpgart interface v0.103
[ 1.498204] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.501591] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.501891] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.502703] mousedev: PS/2 mouse device common for all mice
[ 1.503162] rtc_cmos 00:02: RTC can wake from S4
[ 1.503691] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.504104] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.504831] cpuidle: using governor ladder
[ 1.505586] cpuidle: using governor menu
[ 1.506652] TCP cubic registered
[ 1.507001] NET: Registered protocol family 10
[ 1.509392] Mobile IPv6
[ 1.509546] NET: Registered protocol family 17
[ 1.520506] Registering the dns_resolver key type
[ 1.531857] Using IPI No-Shortcut mode
[ 1.543217] PM: Hibernation image not present or could not be loaded.
[ 1.543260] registered taskstats version 1
[ 1.558473] rtc_cmos 00:02: setting system clock to 2011-12-15 19:15:41 UTC (1323976541)
[ 1.569743] Initializing network drop monitor service
[ 1.581167] Freeing unused kernel memory: 404k freed
[ 1.592755] Write protecting the kernel text: 2768k
[ 1.603970] Write protecting the kernel read-only data: 1088k
[ 1.614953] NX-protecting the kernel data: 3376k
[ 1.683629] udevd[48]: starting version 175
[ 1.803738] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.853117] usbcore: registered new interface driver usbfs
[ 1.888743] SCSI subsystem initialized
[ 1.925123] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.962629] usbcore: registered new interface driver hub
[ 1.998233] usbcore: registered new device driver usb
[ 2.002427] r8169 0000:01:00.0: setting latency timer to 64
[ 2.002528] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 2.004727] r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xf825a000, 00:50:c2:20:2d:f1, XID 1c4000c0 IRQ 40
[ 2.024390] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.025000] libata version 3.00 loaded.
[ 2.038512] pata_sch 0000:00:1f.1: version 0.2
[ 2.038708] pata_sch 0000:00:1f.1: setting latency timer to 64
[ 2.040382] scsi0 : pata_sch
[ 2.055549] scsi1 : pata_sch
[ 2.071304] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.084316] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.100106] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.114438] sata_sil24 0000:02:00.0: version 1.1
[ 2.114484] sata_sil24 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.128459] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.141384] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.141404] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.154120] sata_sil24 0000:02:00.0: setting latency timer to 64
[ 2.155285] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.166900] scsi2 : sata_sil24
[ 2.167680] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.171586] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.171657] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe937c00
[ 2.201124] scsi3 : sata_sil24
[ 2.204067] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.204208] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.204219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.204229] usb usb1: Product: EHCI Host Controller
[ 2.204238] usb usb1: Manufacturer: Linux 3.1.0-1-686-pae ehci_hcd
[ 2.204247] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.280729] ata3: SATA max UDMA/100 host m128@0xfebffc00 port 0xfebf8000 irq 17
[ 2.281417] hub 1-0:1.0: USB hub found
[ 2.281440] hub 1-0:1.0: 8 ports detected
[ 2.315803] ata4: SATA max UDMA/100 host m128@0xfebffc00 port 0xfebfa000 irq 17
[ 2.316117] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.316146] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.316158] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.316203] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.316317] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c480
[ 2.316473] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.316485] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.316495] usb usb2: Product: UHCI Host Controller
[ 2.316503] usb usb2: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 2.316512] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.436697] hub 2-0:1.0: USB hub found
[ 2.448875] hub 2-0:1.0: 2 ports detected
[ 2.460839] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.472775] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.472791] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.485190] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.497250] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c080
[ 2.509253] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.521285] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.533317] usb usb3: Product: UHCI Host Controller
[ 2.533328] usb usb3: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 2.533338] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.534276] hub 3-0:1.0: USB hub found
[ 2.534299] hub 3-0:1.0: 2 ports detected
[ 2.534588] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.534614] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.534627] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.534660] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.534763] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 2.534906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.534917] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.534927] usb usb4: Product: UHCI Host Controller
[ 2.534936] usb usb4: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 2.534945] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.535782] hub 4-0:1.0: USB hub found
[ 2.535803] hub 4-0:1.0: 2 ports detected
[ 2.760122] usb 1-4: new high speed USB device number 3 using ehci_hcd
[ 2.921762] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[ 2.933256] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.944630] usb 1-4: Product: 802.11 n WLAN
[ 2.955876] usb 1-4: Manufacturer: Ralink
[ 2.967034] usb 1-4: SerialNumber: 1.0
[ 3.220106] usb 2-2: new full speed USB device number 2 using uhci_hcd
[ 3.401454] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
[ 3.412589] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.423730] usb 2-2: Product: Generic USB Hub
[ 3.434796] usb 2-2: Manufacturer: ALCOR
[ 3.448631] hub 2-2:1.0: USB hub found
[ 3.460456] hub 2-2:1.0: 4 ports detected
[ 3.753478] usb 2-2.1: new low speed USB device number 3 using uhci_hcd
[ 3.969488] usb 2-2.1: New USB device found, idVendor=1e54, idProduct=2030
[ 3.980371] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.991125] usb 2-2.1: Product: USB Keyboard
[ 4.001759] usb 2-2.1: Manufacturer: TypeMatrix.com
[ 4.084517] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input0
[ 4.096171] generic-usb 0003:1E54:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input0
[ 4.119435] usb 2-2.3: new low speed USB device number 4 using uhci_hcd
[ 4.187290] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input1
[ 4.200754] generic-usb 0003:1E54:2030.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input1
[ 4.226045] usbcore: registered new interface driver usbhid
[ 4.239022] usbhid: USB HID core driver
[ 4.312489] usb 2-2.3: New USB device found, idVendor=045e, idProduct=0040
[ 4.325666] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.338616] usb 2-2.3: Product: Microsoft Wheel Mouse Optical®
[ 4.351479] usb 2-2.3: Manufacturer: Microsoft
[ 4.370312] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
[ 4.397556] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.0-2.3/input0
[ 4.580127] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 4.639215] ata3.00: ATA-8: TOSHIBA MK1235GSL, PV010J, max UDMA/100
[ 4.653625] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.668939] ata3.00: configured for UDMA/100
[ 4.683807] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1235GS PV01 PQ: 0 ANSI: 5
[ 6.776138] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.844251] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 6.859761] sd 2:0:0:0: [sda] Write Protect is off
[ 6.874623] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.874755] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.950798] sda: sda1 sda2 < sda5 >
[ 6.967226] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.685527] PM: Starting manual resume from disk
[ 7.700880] PM: Hibernation image partition 8:5 present
[ 7.700887] PM: Looking for hibernation image.
[ 7.723912] PM: Image not found (code -22)
[ 7.723920] PM: Hibernation image not present or could not be loaded.
[ 7.805349] kjournald starting. Commit interval 5 seconds
[ 7.805677] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.742889] udevd[226]: starting version 175
[ 11.981822] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 12.025304] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 12.042681] ACPI: Sleep Button [SLPB]
[ 12.060163] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 12.082546] ACPI: Power Button [PWRB]
[ 12.104067] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 12.122843] ACPI: Lid Switch [LID]
[ 12.256846] ACPI: acpi_idle yielding to intel_idle
[ 13.061354] Error: Driver 'pcspkr' is already registered, aborting...
[ 13.313062] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.330048] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 13.373747] cfg80211: Calling CRDA to update world regulatory domain
[ 13.638943] hda_codec: ALC888: BIOS auto-probing.
[ 13.655085] hda_codec: ALC888: SKU not ready 0x00000100
[ 13.675352] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 13.698629] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.728119] usb 1-4: reset high speed USB device number 3 using ehci_hcd
[ 14.089340] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.091661] Registered led device: rt2800usb-phy0::radio
[ 14.091782] Registered led device: rt2800usb-phy0::assoc
[ 14.091904] Registered led device: rt2800usb-phy0::quality
[ 14.092426] usbcore: registered new interface driver rt2800usb
[ 16.130883] Adding 2650688k swap on /dev/sda5. Priority:-1 extents:1 across:2650688k
[ 16.599995] EXT3-fs (sda1): using internal journal
[ 16.782078] loop: module loaded
[ 20.023201] r8169 0000:01:00.0: eth0: link down
[ 20.024026] r8169 0000:01:00.0: eth0: link down
[ 20.050342] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.258429] fuse init (API version 7.17)
[ 21.689511] r8169 0000:01:00.0: eth0: link up
[ 21.690756] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.157095] lp: driver loaded but no devices found
[ 24.357318] ppdev: user-space parallel port driver
[ 24.403068] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[ 24.403644] parport0: irq 7 detected
[ 24.502135] lp0: using parport0 (polling).
[ 31.808050] eth0: no IPv6 routers present
Reply to: