Bug#641749: ath3k_load_firmware: Can't change to loading configuration err
>> 4. Another thing to try would be downgrading just udev and libudev0
>> to the versions in squeeze from wheezy.
I was able to try wheezy with a downgraded udev to version 164 from
squeeze, but using Sid's kernel 3.1.4. Sadly, I get the same problem!
(this is rather upsetting, since I'm using the same combination on
squeeze and I get no problems). Below is a summary of the important
messages, but I've attached a dmesg.log.
[ 1.729138] udev[57]: starting version 164
[ 13.522969] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 18.541566] Bluetooth: Can't change to loading configuration err
[ 18.541690] ath3k: probe of 1-1.3:1.0 failed with error -110
[ 18.541733] usbcore: registered new interface driver ath3k
Next step I will try to use kernel 3.2 from experimental. And I will
try to use newest udev.
Thanks
Andres
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1-amd64 (Debian 3.1.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Tue Nov 29 13:47:12 UTC 2011
[ 0.000000] Command line: initrd=/live/initrd.img boot=live config quiet BOOT_IMAGE=/live/vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b3594000 (usable)
[ 0.000000] BIOS-e820: 00000000b3594000 - 00000000b3596000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3596000 - 00000000b35de000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35de000 - 00000000b35e8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b35e8000 - 00000000b35eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35eb000 - 00000000b361a000 (reserved)
[ 0.000000] BIOS-e820: 00000000b361a000 - 00000000b361c000 (usable)
[ 0.000000] BIOS-e820: 00000000b361c000 - 00000000b3626000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b3626000 - 00000000b3647000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3647000 - 00000000b368a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b368a000 - 00000000b3800000 (usable)
[ 0.000000] BIOS-e820: 00000000b7e00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M., BIOS Spring Peak 01/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0B4000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 138000000 mask FF8000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b4000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcd20] fcd20
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b3800000
[ 0.000000] 0000000000 - 00b3800000 page 2M
[ 0.000000] kernel direct mapping tables up to b3800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ b37fa000-b3800000
[ 0.000000] RAMDISK: 7f492000 - 7ffff000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 ALASKA)
[ 0.000000] ACPI: XSDT 00000000b35de080 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000b35e6e90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xB361DF40/0x00000000B361DF80, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000b35de168 08D23 (v02 ALASKA A M I 00000018 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000b361df40 00040
[ 0.000000] ACPI: APIC 00000000b35e6f88 00072 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000b35e7000 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000b35e7108 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000b35e7148 00038 (v01 ALASKA A M I 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000b35e7180 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133a00000-ffff8801371fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000b3594
[ 0.000000] 0: 0x000b361a -> 0x000b361c
[ 0.000000] 0: 0x000b368a -> 0x000b3800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 964246
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 716612 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b3594000 - 00000000b3596000
[ 0.000000] PM: Registered nosave memory: 00000000b3596000 - 00000000b35de000
[ 0.000000] PM: Registered nosave memory: 00000000b35de000 - 00000000b35e8000
[ 0.000000] PM: Registered nosave memory: 00000000b35e8000 - 00000000b35eb000
[ 0.000000] PM: Registered nosave memory: 00000000b35eb000 - 00000000b361a000
[ 0.000000] PM: Registered nosave memory: 00000000b361c000 - 00000000b3626000
[ 0.000000] PM: Registered nosave memory: 00000000b3626000 - 00000000b3647000
[ 0.000000] PM: Registered nosave memory: 00000000b3647000 - 00000000b368a000
[ 0.000000] PM: Registered nosave memory: 00000000b3800000 - 00000000b7e00000
[ 0.000000] PM: Registered nosave memory: 00000000b7e00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s80768 r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s80768 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 946769
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/live/initrd.img boot=live config quiet BOOT_IMAGE=/live/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3712964k/5111808k available (3291k kernel code, 1254824k absent, 144020k reserved, 3428k data, 556k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1330.373 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.74 BogoMIPS (lpj=5321492)
[ 0.000011] pid_max: default: 32768 minimum: 301
[ 0.000078] Security Framework initialized
[ 0.000626] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002453] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003325] Mount-cache hash table entries: 256
[ 0.003510] Initializing cgroup subsys cpuacct
[ 0.003518] Initializing cgroup subsys memory
[ 0.003536] Initializing cgroup subsys devices
[ 0.003541] Initializing cgroup subsys freezer
[ 0.003544] Initializing cgroup subsys net_cls
[ 0.003548] Initializing cgroup subsys blkio
[ 0.003595] CPU: Physical Processor ID: 0
[ 0.003598] CPU: Processor Core ID: 0
[ 0.003606] mce: CPU supports 9 MCE banks
[ 0.003624] CPU0: Thermal monitoring enabled (TM1)
[ 0.003635] using mwait in idle threads.
[ 0.004284] ACPI: Core revision 20110623
[ 0.013253] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052904] CPU0: Intel(R) Core(TM) i3 CPU U 380 @ 1.33GHz stepping 05
[ 0.159047] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.159059] ... version: 3
[ 0.159061] ... bit width: 48
[ 0.159063] ... generic registers: 4
[ 0.159066] ... value mask: 0000ffffffffffff
[ 0.159069] ... max period: 000000007fffffff
[ 0.159071] ... fixed-purpose events: 3
[ 0.159073] ... event mask: 000000070000000f
[ 0.159338] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.159522] Booting Node 0, Processors #1
[ 0.159526] smpboot cpu 1: start_ip = 95000
[ 0.267079] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.267270] #2
[ 0.267273] smpboot cpu 2: start_ip = 95000
[ 0.374939] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.375144] #3 Ok.
[ 0.375147] smpboot cpu 3: start_ip = 95000
[ 0.482865] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.482924] Brought up 4 CPUs
[ 0.482928] Total of 4 processors activated (10641.58 BogoMIPS).
[ 0.485895] devtmpfs: initialized
[ 0.491995] PM: Registering ACPI NVS region at b3596000 (294912 bytes)
[ 0.492026] PM: Registering ACPI NVS region at b35e8000 (12288 bytes)
[ 0.492030] PM: Registering ACPI NVS region at b361c000 (40960 bytes)
[ 0.492036] PM: Registering ACPI NVS region at b3647000 (274432 bytes)
[ 0.492285] print_constraints: dummy:
[ 0.492381] NET: Registered protocol family 16
[ 0.492536] ACPI: bus type pci registered
[ 0.492638] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.492644] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.553414] PCI: Using configuration type 1 for base access
[ 0.554333] bio: create slab <bio-0> at 0
[ 0.554497] ACPI: Added _OSI(Module Device)
[ 0.554501] ACPI: Added _OSI(Processor Device)
[ 0.554505] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.554509] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.556797] ACPI: EC: Look up EC in DSDT
[ 0.559034] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.566820] ACPI: SSDT 00000000b361cc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.567508] ACPI: Dynamic OEM Table Load:
[ 0.567512] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.567563] ACPI Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20110623/tbutils-314)
[ 0.567571] ACPI: SSDT 00000000b361de18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.568122] ACPI: Dynamic OEM Table Load:
[ 0.568126] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.571445] ACPI: Interpreter enabled
[ 0.571453] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.571532] ACPI: Using IOAPIC for interrupt routing
[ 0.572022] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.676242] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.676567] ACPI: No dock devices found.
[ 0.676570] HEST: Table not found.
[ 0.676575] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.676844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.677050] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.677055] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.677059] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.677063] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 0.677083] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.677112] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.677143] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.677161] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.677172] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.677181] pci 0000:00:02.0: reg 20: [io 0xf080-0xf087]
[ 0.677267] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.677303] pci 0000:00:16.0: reg 10: [mem 0xfe509000-0xfe50900f 64bit]
[ 0.677401] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.677408] pci 0000:00:16.0: PME# disabled
[ 0.677462] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.677492] pci 0000:00:1a.0: reg 10: [mem 0xfe508000-0xfe5083ff]
[ 0.677601] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.677607] pci 0000:00:1a.0: PME# disabled
[ 0.677648] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.677676] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
[ 0.677770] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.677777] pci 0000:00:1b.0: PME# disabled
[ 0.677814] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.677910] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.677917] pci 0000:00:1c.0: PME# disabled
[ 0.677961] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.678059] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.678067] pci 0000:00:1c.4: PME# disabled
[ 0.678118] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.678150] pci 0000:00:1d.0: reg 10: [mem 0xfe507000-0xfe5073ff]
[ 0.678259] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.678266] pci 0000:00:1d.0: PME# disabled
[ 0.678298] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.678394] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 0.678546] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 0.678581] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 0.678595] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 0.678609] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 0.678625] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 0.678646] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.678661] pci 0000:00:1f.2: reg 24: [mem 0xfe506000-0xfe5067ff]
[ 0.678723] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.678729] pci 0000:00:1f.2: PME# disabled
[ 0.678761] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.678789] pci 0000:00:1f.3: reg 10: [mem 0xfe505000-0xfe5050ff 64bit]
[ 0.678826] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.678888] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.678923] pci 0000:00:1f.6: reg 10: [mem 0xfe504000-0xfe504fff 64bit]
[ 0.679632] pci 0000:01:00.0: [10ec:8172] type 0 class 0x000280
[ 0.680184] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.680570] pci 0000:01:00.0: reg 14: [mem 0xfe400000-0xfe403fff]
[ 0.683647] pci 0000:01:00.0: supports D1 D2
[ 0.683651] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.683764] pci 0000:01:00.0: PME# disabled
[ 0.684915] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.684923] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.684929] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.685090] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.685162] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.685287] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.685365] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.685588] pci 0000:02:00.0: supports D1 D2
[ 0.685591] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.685607] pci 0000:02:00.0: PME# disabled
[ 0.685777] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.685785] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.685798] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.685891] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.685909] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.685913] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.685918] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.685923] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.685952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.686386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.686616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.686702] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.686960] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.687269] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.697201] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.697290] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.697376] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.697460] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.697544] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.697628] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.697712] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.697796] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.697985] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.697998] vgaarb: loaded
[ 0.698000] vgaarb: bridge control possible 0000:00:02.0
[ 0.698058] PCI: Using ACPI for IRQ routing
[ 0.709647] PCI: Discovered peer bus ff
[ 0.709703] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.709736] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.709769] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.709799] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.709828] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.709857] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.710132] PCI: pci_cache_line_size set to 64 bytes
[ 0.710329] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.710333] reserve RAM buffer: 00000000b3594000 - 00000000b3ffffff
[ 0.710341] reserve RAM buffer: 00000000b361c000 - 00000000b3ffffff
[ 0.710346] reserve RAM buffer: 00000000b3800000 - 00000000b3ffffff
[ 0.710519] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.710529] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.712560] Switching to clocksource hpet
[ 0.714448] Switched to NOHz mode on CPU #0
[ 0.714550] Switched to NOHz mode on CPU #2
[ 0.714579] Switched to NOHz mode on CPU #1
[ 0.714602] Switched to NOHz mode on CPU #3
[ 0.715425] pnp: PnP ACPI init
[ 0.715446] ACPI: bus type pnp registered
[ 0.715554] pnp 00:00: [bus 00-ff]
[ 0.715558] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.715562] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.715566] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.715569] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.715573] pnp 00:00: [mem 0x00000000 window]
[ 0.715577] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 0.715662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.715756] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.715760] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.715763] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.715768] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.715772] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.715841] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.715846] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.715851] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.715856] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.715861] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.715866] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.716045] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.716049] pnp 00:02: [io 0x0a00-0x0a1f]
[ 0.716053] pnp 00:02: [io 0x0a20-0x0a3f]
[ 0.716118] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 0.716123] system 00:02: [io 0x0a20-0x0a3f] has been reserved
[ 0.716128] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.716173] pnp 00:03: [io 0x0060]
[ 0.716176] pnp 00:03: [io 0x0064]
[ 0.716190] pnp 00:03: [irq 1]
[ 0.716240] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.716308] pnp 00:04: [irq 12]
[ 0.716356] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.716377] pnp 00:05: [dma 4]
[ 0.716381] pnp 00:05: [io 0x0000-0x000f]
[ 0.716385] pnp 00:05: [io 0x0081-0x0083]
[ 0.716388] pnp 00:05: [io 0x0087]
[ 0.716391] pnp 00:05: [io 0x0089-0x008b]
[ 0.716394] pnp 00:05: [io 0x008f]
[ 0.716397] pnp 00:05: [io 0x00c0-0x00df]
[ 0.716438] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.716456] pnp 00:06: [io 0x0070-0x0071]
[ 0.716465] pnp 00:06: [irq 8]
[ 0.716503] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.716519] pnp 00:07: [io 0x0061]
[ 0.716584] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.716616] pnp 00:08: [io 0x0010-0x001f]
[ 0.716620] pnp 00:08: [io 0x0022-0x003f]
[ 0.716623] pnp 00:08: [io 0x0044-0x005f]
[ 0.716627] pnp 00:08: [io 0x0072-0x007f]
[ 0.716630] pnp 00:08: [io 0x0080]
[ 0.716633] pnp 00:08: [io 0x0084-0x0086]
[ 0.716636] pnp 00:08: [io 0x0088]
[ 0.716639] pnp 00:08: [io 0x008c-0x008e]
[ 0.716642] pnp 00:08: [io 0x0090-0x009f]
[ 0.716645] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.716648] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.716653] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.716726] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.716731] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.716749] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.716758] pnp 00:09: [irq 13]
[ 0.716801] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.717999] pnp 00:0a: [io 0x0400-0x047f]
[ 0.718004] pnp 00:0a: [io 0x1180-0x119f]
[ 0.718007] pnp 00:0a: [io 0x0500-0x057f]
[ 0.718011] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.718015] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.718018] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.718022] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.718098] system 00:0a: [io 0x0400-0x047f] has been reserved
[ 0.718103] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.718108] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.718114] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.718119] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.718124] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.718129] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.718134] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.718339] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.718400] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.757340] pnp: PnP ACPI: found 12 devices
[ 0.757345] ACPI: ACPI bus type pnp unregistered
[ 0.766243] PCI: max bus depth: 1 pci_try_num: 2
[ 0.766287] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.766293] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.766302] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.766317] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.766322] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.766334] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.766346] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.766384] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.766393] pci 0000:00:1c.0: setting latency timer to 64
[ 0.766405] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.766411] pci 0000:00:1c.4: setting latency timer to 64
[ 0.766423] pci 0000:00:1e.0: setting latency timer to 64
[ 0.766429] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.766433] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.766436] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.766440] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.766444] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.766448] pci_bus 0000:01: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.766451] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.766455] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.766459] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.766463] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.766466] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.766470] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.766474] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
[ 0.766477] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.766592] NET: Registered protocol family 2
[ 0.766833] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.768469] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.771667] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.772059] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.772063] TCP reno registered
[ 0.772079] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.772119] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.772325] NET: Registered protocol family 1
[ 0.772352] pci 0000:00:02.0: Boot video device
[ 1.028349] PCI: CLS 64 bytes, default 64
[ 1.028418] Unpacking initramfs...
[ 1.448535] Freeing initrd memory: 11700k freed
[ 1.452288] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.452296] Placing 64MB software IO TLB between ffff8800af594000 - ffff8800b3594000
[ 1.452300] software IO TLB at phys 0xaf594000 - 0xb3594000
[ 1.453200] audit: initializing netlink socket (disabled)
[ 1.453221] type=2000 audit(1323118677.296:1): initialized
[ 1.488315] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.509222] VFS: Disk quotas dquot_6.5.2
[ 1.509276] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.509400] msgmni has been set to 7274
[ 1.509657] alg: No test for stdrng (krng)
[ 1.509712] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.509718] io scheduler noop registered
[ 1.509720] io scheduler deadline registered
[ 1.509752] io scheduler cfq registered (default)
[ 1.509913] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.509990] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.510116] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.510180] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 1.510332] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.510336] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.510344] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.510374] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.510378] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.510386] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.510531] intel_idle: MWAIT substates: 0x1120
[ 1.510534] intel_idle: v0.4 model 0x25
[ 1.510536] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.510639] ERST: Table is not found!
[ 1.510642] GHES: HEST is not enabled!
[ 1.510767] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.664152] Linux agpgart interface v0.103
[ 1.664275] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.664456] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.665605] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.665853] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.666062] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.674976] i8042: Detected active multiplexing controller, rev 1.1
[ 1.677894] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.677907] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.677921] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.677929] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.677935] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.678244] mousedev: PS/2 mouse device common for all mice
[ 1.678301] rtc_cmos 00:06: RTC can wake from S4
[ 1.678478] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.678517] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.678778] cpuidle: using governor ladder
[ 1.679063] cpuidle: using governor menu
[ 1.679385] TCP cubic registered
[ 1.679572] NET: Registered protocol family 10
[ 1.680560] Mobile IPv6
[ 1.680568] NET: Registered protocol family 17
[ 1.680579] Registering the dns_resolver key type
[ 1.681308] PM: Hibernation image not present or could not be loaded.
[ 1.681344] registered taskstats version 1
[ 1.690625] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.693034] rtc_cmos 00:06: setting system clock to 2011-12-05 20:57:58 UTC (1323118678)
[ 1.693135] Initializing network drop monitor service
[ 1.695407] Freeing unused kernel memory: 556k freed
[ 1.695533] Write protecting the kernel read-only data: 6144k
[ 1.701315] Freeing unused kernel memory: 788k freed
[ 1.706439] Freeing unused kernel memory: 700k freed
[ 1.729138] udev[57]: starting version 164
[ 1.784921] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.784988] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.785069] r8169 0000:02:00.0: setting latency timer to 64
[ 1.785293] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.786207] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc9000064c000, 1c:6f:65:90:94:af, XID 0c200000 IRQ 42
[ 1.798370] usbcore: registered new interface driver usbfs
[ 1.798415] usbcore: registered new interface driver hub
[ 1.800475] usbcore: registered new device driver usb
[ 1.801414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.801464] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.801504] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.801512] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.801568] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.801628] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.805632] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.805668] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe508000
[ 1.811658] SCSI subsystem initialized
[ 1.814519] libata version 3.00 loaded.
[ 1.819384] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.819442] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.819446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.819450] usb usb1: Product: EHCI Host Controller
[ 1.819453] usb usb1: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[ 1.819457] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.819760] hub 1-0:1.0: USB hub found
[ 1.819772] hub 1-0:1.0: 2 ports detected
[ 1.819912] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.819946] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.819952] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.819964] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.820009] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.824027] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.824055] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe507000
[ 1.839458] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.839535] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.839541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.839545] usb usb2: Product: EHCI Host Controller
[ 1.839548] usb usb2: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[ 1.839552] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.839768] hub 2-0:1.0: USB hub found
[ 1.839781] hub 2-0:1.0: 2 ports detected
[ 1.839951] ahci 0000:00:1f.2: version 3.0
[ 1.839979] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.840060] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.840162] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[ 1.840170] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 1.840180] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.848190] scsi0 : ahci
[ 1.848442] scsi1 : ahci
[ 1.848631] scsi2 : ahci
[ 1.848840] scsi3 : ahci
[ 1.848978] scsi4 : ahci
[ 1.849240] ata1: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506100 irq 43
[ 1.849245] ata2: DUMMY
[ 1.849247] ata3: DUMMY
[ 1.849249] ata4: DUMMY
[ 1.849253] ata5: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506300 irq 43
[ 2.131109] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.167013] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.167045] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.167460] ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10302, max UDMA/133
[ 2.167466] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.168029] ata1.00: configured for UDMA/133
[ 2.168340] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
[ 2.173856] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.174042] sd 0:0:0:0: [sda] Write Protect is off
[ 2.174047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.174101] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.175038] sda: sda1 sda2 < sda5 >
[ 2.176291] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.263516] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.263522] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.263968] hub 1-1:1.0: USB hub found
[ 2.264135] hub 1-1:1.0: 6 ports detected
[ 2.363775] Uniform Multi-Platform E-IDE driver
[ 2.364345] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 2.364366] Probing IDE interface ide0...
[ 2.374932] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.450750] Refined TSC clocksource calibration: 1330.149 MHz.
[ 2.450758] Switching to clocksource tsc
[ 2.507247] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.507252] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.507681] hub 2-1:1.0: USB hub found
[ 2.507867] hub 2-1:1.0: 8 ports detected
[ 2.578821] usb 1-1.3: new full speed USB device number 3 using ehci_hcd
[ 2.671224] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3000
[ 2.671230] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.778607] usb 2-1.2: new high speed USB device number 3 using ehci_hcd
[ 2.872053] usb 2-1.2: New USB device found, idVendor=1e3d, idProduct=2088
[ 2.872064] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.872073] usb 2-1.2: Product: V88
[ 2.872079] usb 2-1.2: Manufacturer: V88
[ 2.872085] usb 2-1.2: SerialNumber: 2508130005D81807
[ 2.876386] usbcore: registered new interface driver uas
[ 2.877641] Initializing USB Mass Storage driver...
[ 2.877846] scsi5 : usb-storage 2-1.2:1.0
[ 2.878009] usbcore: registered new interface driver usb-storage
[ 2.878013] USB Mass Storage support registered.
[ 2.926274] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.926307] Probing IDE interface ide1...
[ 2.942447] usb 2-1.5: new high speed USB device number 4 using ehci_hcd
[ 3.485678] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.497674] usb 2-1.5: New USB device found, idVendor=174f, idProduct=1420
[ 3.497680] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.497684] usb 2-1.5: Product: USB Camera Device
[ 3.497687] usb 2-1.5: Manufacturer: Syntek
[ 3.497690] usb 2-1.5: SerialNumber: STK00001
[ 3.603257] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.874231] scsi 5:0:0:0: Direct-Access V88 V88 5.00 PQ: 0 ANSI: 2
[ 3.874418] scsi: killing requests for dead queue
[ 3.874586] scsi: killing requests for dead queue
[ 3.874740] scsi: killing requests for dead queue
[ 3.874897] scsi: killing requests for dead queue
[ 3.875049] scsi: killing requests for dead queue
[ 3.875213] scsi: killing requests for dead queue
[ 3.875313] scsi: killing requests for dead queue
[ 3.875541] scsi: killing requests for dead queue
[ 3.876546] sd 5:0:0:0: [sdb] 2046976 512-byte logical blocks: (1.04 GB/999 MiB)
[ 3.877089] sd 5:0:0:0: [sdb] Write Protect is off
[ 3.877108] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 3.877617] sd 5:0:0:0: [sdb] No Caching mode page present
[ 3.877687] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3.880486] sd 5:0:0:0: [sdb] No Caching mode page present
[ 3.880569] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3.881435] sdb: sdb1
[ 3.884112] sd 5:0:0:0: [sdb] No Caching mode page present
[ 3.884179] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 3.884247] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 4.794408] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4.797769] ISO 9660 Extensions: RRIP_1991A
[ 4.809422] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.810968] aufs 3.1-20111031
[ 4.826203] loop: module loaded
[ 4.892387] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 11.942069] udev[950]: starting version 164
[ 12.064835] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 12.064849] ACPI: Power Button [PWRB]
[ 12.064961] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 12.066012] ACPI: Lid Switch [LID0]
[ 12.066127] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 12.066133] ACPI: Power Button [PWRF]
[ 12.090020] ACPI: acpi_idle yielding to intel_idle
[ 12.122090] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 12.163924] ACPI: Battery Slot [BAT1] (battery present)
[ 12.164187] wmi: Mapper loaded
[ 12.221103] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 12.231617] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[ 12.231633] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 12.231692] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 12.231904] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 12.243707] cfg80211: Calling CRDA to update world regulatory domain
[ 12.275577] ACPI: AC Adapter [AC] (on-line)
[ 12.311548] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.396362] asus_wmi: Asus Management GUID not found
[ 12.431828] [drm] Initialized drm 1.1.0 20060810
[ 12.673347] rtl8192se 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.673465] rtl8192se 0000:01:00.0: setting latency timer to 64
[ 12.693846] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.694060] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 12.694152] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 12.710846] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[ 12.710851] Loading firmware rtlwifi/rtl8192sefw.bin
[ 12.716509] Linux media interface: v0.10
[ 12.812385] Linux video capture interface: v2.00
[ 12.836951] uvcvideo: Found UVC 1.00 device USB Camera Device (174f:1420)
[ 12.934587] input: USB Camera Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5
[ 12.934705] usbcore: registered new interface driver uvcvideo
[ 12.934709] USB Video Class driver (1.1.1)
[ 12.944114] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 12.944945] hda_codec: ALC269: SKU not ready 0x598301f0
[ 12.945534] hda_codec: ALC269VB: BIOS auto-probing.
[ 12.947676] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 12.962543] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
[ 12.963097] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 12.963491] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 12.966690] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 12.966827] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 12.966968] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.967138] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.967508] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.967518] i915 0000:00:02.0: setting latency timer to 64
[ 13.056705] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 13.056712] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 13.057445] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 13.057483] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.057486] [drm] Driver supports precise vblank timestamp query.
[ 13.057540] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 13.212585] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0
[ 13.257946] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[ 13.470999] usb 1-1.3: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq 6 len 1024 ret -110
[ 13.509241] Bluetooth: Core ver 2.16
[ 13.509273] NET: Registered protocol family 31
[ 13.509276] Bluetooth: HCI device and connection manager initialized
[ 13.509280] Bluetooth: HCI socket layer initialized
[ 13.509283] Bluetooth: L2CAP socket layer initialized
[ 13.509290] Bluetooth: SCO socket layer initialized
[ 13.522969] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 13.603506] fbcon: inteldrmfb (fb0) is primary device
[ 13.881402] Console: switching to colour frame buffer device 170x48
[ 13.888335] fb0: inteldrmfb frame buffer device
[ 13.888337] drm: registered panic notifier
[ 13.890774] acpi device:3e: registered as cooling_device4
[ 13.891283] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 13.891386] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.891488] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.426590] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 18.541566] Bluetooth: Can't change to loading configuration err
[ 18.541690] ath3k: probe of 1-1.3:1.0 failed with error -110
[ 18.541733] usbcore: registered new interface driver ath3k
[ 19.230608] fuse init (API version 7.17)
[ 21.451027] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.617747] r8169 0000:02:00.0: eth0: link down
[ 21.618439] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.230136] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 44.068430] wlan0: direct probe to 00:26:cb:ab:00:f0 (try 1/3)
[ 44.265134] wlan0: direct probe to 00:26:cb:ab:00:f0 (try 2/3)
[ 44.464915] wlan0: direct probe to 00:26:cb:ab:00:f0 (try 3/3)
[ 44.664651] wlan0: direct probe to 00:26:cb:ab:00:f0 timed out
[ 50.755632] wlan0: direct probe to 00:26:cb:ab:04:30 (try 1/3)
[ 50.953910] wlan0: direct probe to 00:26:cb:ab:04:30 (try 2/3)
[ 51.153672] wlan0: direct probe to 00:26:cb:ab:04:30 (try 3/3)
[ 51.353410] wlan0: direct probe to 00:26:cb:ab:04:30 timed out
[ 57.664067] wlan0: direct probe to 00:26:cb:4e:07:10 (try 1/3)
[ 57.862334] wlan0: direct probe to 00:26:cb:4e:07:10 (try 2/3)
[ 58.062170] wlan0: direct probe to 00:26:cb:4e:07:10 (try 3/3)
[ 58.261893] wlan0: direct probe to 00:26:cb:4e:07:10 timed out
[ 64.568702] wlan0: authenticate with 00:26:cb:4e:2d:90 (try 1)
[ 64.570335] wlan0: authenticated
[ 64.601664] wlan0: associate with 00:26:cb:4e:2d:90 (try 1)
[ 64.606393] wlan0: RX AssocResp from 00:26:cb:4e:2d:90 (capab=0x421 status=0 aid=1)
[ 64.606399] wlan0: associated
[ 64.618628] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 74.711919] wlan0: no IPv6 routers present
[ 154.011122] wlan0: direct probe to 00:26:cb:ab:00:40 (try 1/3)
[ 154.209232] wlan0: direct probe to 00:26:cb:ab:00:40 (try 2/3)
[ 154.409042] wlan0: direct probe to 00:26:cb:ab:00:40 (try 3/3)
[ 154.608803] wlan0: direct probe to 00:26:cb:ab:00:40 timed out
[ 160.711835] wlan0: deauthenticating from 00:26:cb:4e:2d:90 by local choice (reason=2)
[ 160.718275] cfg80211: Calling CRDA for country: EC
[ 160.723534] wlan0: authenticate with 00:26:cb:4e:2d:90 (try 1)
[ 160.725739] wlan0: authenticated
[ 160.766819] wlan0: associate with 00:26:cb:4e:2d:90 (try 1)
[ 160.771600] wlan0: RX ReassocResp from 00:26:cb:4e:2d:90 (capab=0x421 status=0 aid=1)
[ 160.771607] wlan0: associated
Reply to: