Bug#650916: linux-image-3.1.0-1-amd64: WARNING in iommu/dmar.c when VT-d is enabled in BIOS
Package: linux-2.6
Version: 3.1.4-1
Severity: minor
Hi,
When I enable VT-d in the BIOS, the linux kernel produces the following WARNING on boot,
resulting in a tainted kernel:
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /home/blank/debian/kernel/release/linux-2.6/linux-2.6-3.1.4/debian/build/source_amd64_none/drivers/iommu/dmar.c:634 warn_invalid_dmar+0x77/0x85()
[ 0.000000] Hardware name: System Product Name
[ 0.000000] Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
[ 0.000000] BIOS vendor: American Megatrends Inc.; Ver: 1504 ; Product Version: System Version
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 3.1.0-1-amd64 #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81045775>] ? warn_slowpath_common+0x78/0x8c
[ 0.000000] [<ffffffff810457d7>] ? warn_slowpath_fmt_taint+0x3d/0x42
[ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8
[ 0.000000] [<ffffffff816b7917>] ? __early_set_fixmap+0x89/0x8d
[ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8
[ 0.000000] [<ffffffff816b7917>] ? __early_set_fixmap+0x89/0x8d
[ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8
[ 0.000000] [<ffffffff8125710d>] ? warn_invalid_dmar+0x77/0x85
[ 0.000000] [<ffffffff816b7d24>] ? early_iounmap+0xc5/0x114
[ 0.000000] [<ffffffff816d7748>] ? check_zero_address+0xb0/0xeb
[ 0.000000] [<ffffffff81336c66>] ? bad_to_user+0x620/0x620
[ 0.000000] [<ffffffff816d7794>] ? detect_intel_iommu+0x11/0xa6
[ 0.000000] [<ffffffff816abd7b>] ? pci_iommu_alloc+0x3f/0x67
[ 0.000000] [<ffffffff816b76f6>] ? mem_init+0x14/0xe5
[ 0.000000] [<ffffffff816a5961>] ? start_kernel+0x1d0/0x3c8
[ 0.000000] [<ffffffff816a5140>] ? early_idt_handlers+0x140/0x140
[ 0.000000] [<ffffffff816a53c4>] ? x86_64_start_kernel+0x104/0x111
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
I guess this is caused by a buggy bios (as indicated) and nothing can be done from the kernel side?
Except maybe the kernel shouldn't produce a WARNING (and kernel taint) because of this?
The motherboard in question is an ASUS P7P55D-E running bios version 1504, which is the latest version.
I've always had this error, even with previous bios versions and earlier kernel versions. Even
the (pre-)squeeze kernels had this. Feel free to simply close this if the WARNING is the expected
behaviour on broken bioses.
The reportbug output below is taken when the VT-d feature is disabled. I'll attach the dmesg output
from a boot into single user with VT-d enabled.
Regards,
Rik
-- Package-specific info:
** Version:
Linux version 3.1.0-1-amd64 (Debian 3.1.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Tue Nov 29 13:47:12 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/vg_saturn-root ro quiet ipv6.disable=1
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 7.207264] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.207379] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
[ 7.226581] snd_bt87x 0000:0a:02.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.226664] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 7.314649] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.314690] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 7.314708] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.319399] Linux media interface: v0.10
[ 7.436454] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.436457] hda_intel: Disabling MSI
[ 7.436545] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 7.630927] Linux video capture interface: v2.00
[ 7.696180] IR NEC protocol handler initialized
[ 7.717961] bttv: driver version 0.9.19 loaded
[ 7.717963] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 7.717992] bttv: Bt8xx card found (0).
[ 7.718000] bttv 0000:0a:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.718008] bttv0: Bt878 (rev 2) at 0000:0a:02.0, irq: 17, latency: 64, mmio: 0xf4ffe000
[ 7.718022] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 7.718024] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[ 7.718046] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
[ 7.720526] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 7.753588] tveeprom 1-0050: Hauppauge model 61204, rev B1M , serial# 3176099
[ 7.753591] tveeprom 1-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5)
[ 7.753593] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 7.753595] tveeprom 1-0050: audio processor is None (idx 0)
[ 7.753597] tveeprom 1-0050: has no radio
[ 7.753598] bttv0: Hauppauge eeprom indicates model#61204
[ 7.753600] bttv0: tuner type=5
[ 7.753996] IR RC5(x) protocol handler initialized
[ 7.778717] i2c-core: driver [msp3400] using legacy suspend method
[ 7.778719] i2c-core: driver [msp3400] using legacy resume method
[ 7.781435] IR RC6 protocol handler initialized
[ 7.792918] IR JVC protocol handler initialized
[ 7.794042] IR Sony protocol handler initialized
[ 7.795126] IR MCE Keyboard/mouse protocol handler initialized
[ 7.797549] lirc_dev: IR Remote Control driver registered, major 249
[ 7.797952] IR LIRC bridge handler initialized
[ 7.800315] bttv0: audio absent, no audio device found!
[ 7.805792] i2c-core: driver [tuner] using legacy suspend method
[ 7.805794] i2c-core: driver [tuner] using legacy resume method
[ 7.810468] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 7.858129] tuner-simple 1-0061: creating new instance
[ 7.858131] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 7.858866] bttv0: registered device video0
[ 7.858905] bttv0: registered device vbi0
[ 7.858926] bttv0: PLL: 28636363 => 35468950 .. ok
[ 8.031777] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.135553] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.243297] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.354953] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.403488] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input4
[ 8.403973] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input5
[ 8.404114] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input6
[ 8.404188] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input7
[ 8.982317] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 9.174193] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 9.298966] loop: module loaded
[ 10.102460] Adding 8388604k swap on /dev/mapper/vg_saturn-swap. Priority:-1 extents:1 across:8388604k
[ 10.709952] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 10.775254] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.815603] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.866797] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.506336] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.590444] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.171983] Bridge firewalling registered
[ 12.180976] device eth0 entered promiscuous mode
[ 12.289163] r8169 0000:02:00.0: eth0: link down
[ 12.289169] r8169 0000:02:00.0: eth0: link down
[ 15.051347] r8169 0000:02:00.0: eth0: link up
[ 15.052763] br0: port 1(eth0) entering forwarding state
[ 15.052768] br0: port 1(eth0) entering forwarding state
[ 20.383729] RPC: Registered named UNIX socket transport module.
[ 20.383731] RPC: Registered udp transport module.
[ 20.383732] RPC: Registered tcp transport module.
[ 20.383734] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.438913] FS-Cache: Loaded
[ 20.464674] FS-Cache: Netfs 'nfs' registered for caching
[ 20.479805] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 21.230866] fuse init (API version 7.17)
[ 25.312015] Bluetooth: Core ver 2.16
[ 25.312027] NET: Registered protocol family 31
[ 25.312029] Bluetooth: HCI device and connection manager initialized
[ 25.312031] Bluetooth: HCI socket layer initialized
[ 25.312032] Bluetooth: L2CAP socket layer initialized
[ 25.312036] Bluetooth: SCO socket layer initialized
[ 25.351611] Bluetooth: RFCOMM TTY layer initialized
[ 25.351620] Bluetooth: RFCOMM socket layer initialized
[ 25.351622] Bluetooth: RFCOMM ver 1.11
[ 25.394337] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.394341] Bluetooth: BNEP filters: protocol multicast
[ 26.323402] lp: driver loaded but no devices found
[ 26.339876] ppdev: user-space parallel port driver
[ 34.573641] Ebtables v2.0 registered
[ 34.624611] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 43.925622] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0
[ 44.019799] EXT4-fs (md0): re-mounted. Opts: commit=0
[ 44.612025] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 44.688185] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[ 44.689748] EXT4-fs (dm-1): re-mounted. Opts: commit=0
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1504
board_vendor: ASUSTeK Computer INC.
board_name: P7P55D-E
board_version: Rev 1.xx
** Loaded modules:
ip6_tables
ebtable_nat
ebtables
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
rfkill
acpi_cpufreq
mperf
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
bridge
stp
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
iptable_filter
ip_tables
x_tables
dm_crypt
loop
firewire_sbp2
kvm_intel
kvm
snd_hda_codec_hdmi
tuner_simple
tuner_types
tuner
ir_lirc_codec
lirc_dev
ir_mce_kbd_decoder
tvaudio
ir_sony_decoder
tda7432
ir_jvc_decoder
ir_rc6_decoder
msp3400
ir_rc5_decoder
bttv
ir_nec_decoder
i2c_algo_bit
videobuf_dma_sg
videobuf_core
btcx_risc
rc_core
tveeprom
v4l2_common
videodev
snd_hda_codec_via
media
snd_hda_intel
snd_hda_codec
v4l2_compat_ioctl32
snd_bt87x
nvidia (P)
snd_hwdep
i7core_edac
snd_pcm
snd_seq
snd_timer
snd_seq_device
iTCO_wdt
edac_core
evdev
i2c_i801
processor
snd
iTCO_vendor_support
asus_atk0110
thermal_sys
soundcore
snd_page_alloc
i2c_core
button
ext4
mbcache
jbd2
crc16
btrfs
zlib_deflate
crc32c
libcrc32c
dm_mod
raid1
raid0
md_mod
sr_mod
cdrom
sd_mod
crc_t10dif
usb_storage
usbhid
hid
uas
firewire_ohci
firewire_core
crc_itu_t
ahci
libahci
xhci_hcd
ehci_hcd
libata
scsi_mod
r8169
mii
usbcore
** Network interface configuration:
auto lo
iface lo inet loopback
up /sbin/iptables-restore < /etc/network/iptables
auto eth0
iface eth0 inet manual
auto br0
iface br0 inet dhcp
bridge_ports eth0
bridge_maxwait 0
bridge_fd 0
bridge_hello 0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP qlen 1000
link/ether e0:cb:4e:25:19:a7 brd ff:ff:ff:ff:ff:ff
3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether e0:cb:4e:25:19:a7 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.5/24 brd 192.168.0.255 scope global br0
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 11208 148 0 0 0 0 0 0 11208 148 0 0 0 0 0 0
eth0: 2253001 2114 0 0 0 0 0 0 305814 1949 0 0 0 0 0 0
br0: 2200791 1846 0 1 0 0 0 0 305562 1947 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2037 total packets received
0 forwarded
0 incoming packets discarded
2037 incoming packets delivered
2083 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
133 active connections openings
14 passive connection openings
4 failed connection attempts
0 connection resets received
70 connections established
1851 segments received
1891 segments send out
12 segments retransmited
0 bad segments received.
25 resets sent
Udp:
169 packets received
0 packets to unknown port received.
0 packet receive errors
174 packets sent
UdpLite:
TcpExt:
24 TCP sockets finished time wait in fast timer
22 delayed acks sent
Quick ack mode was activated 18 times
1106 packet headers predicted
185 acknowledgments not containing data payload received
2 predicted acknowledgments
10 congestion windows recovered without slow start after partial ack
12 other TCP timeouts
18 DSACKs sent for old packets
2 DSACKs received
2 connections reset due to unexpected data
TCPSackShiftFallback: 1
IpExt:
InMcastPkts: 46
OutMcastPkts: 42
InBcastPkts: 9
OutBcastPkts: 7
InOctets: 2216560
OutOctets: 288576
InMcastOctets: 4693
OutMcastOctets: 4565
InBcastOctets: 984
OutBcastOctets: 328
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f6000000-f7cfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
Subsystem: Device [0043:0083]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Subsystem: Device [0043:0083]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
Subsystem: Device [0043:0083]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5ffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:8375]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f5ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f4c00000-f4dfffff
Prefetchable memory behind bridge: 00000000f5000000-00000000f51fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f4800000-f49fffff
Prefetchable memory behind bridge: 00000000f4a00000-00000000f4bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4400000-f45fffff
Prefetchable memory behind bridge: 00000000f4600000-00000000f47fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f4000000-f41fffff
Prefetchable memory behind bridge: 00000000f4200000-00000000f43fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f7e00000-f7efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 05) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 05) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 [8086:3b50] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7d00000-f7dfffff
Prefetchable memory behind bridge: 00000000f4e00000-00000000f4efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f5ffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 00000000f4f00000-00000000f4ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 51
Region 0: I/O ports at b880 [size=8]
Region 1: I/O ports at b800 [size=4]
Region 2: I/O ports at b480 [size=8]
Region 3: I/O ports at b400 [size=4]
Region 4: I/O ports at b080 [size=32]
Region 5: Memory at f5ff7000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f5ffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ffe0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation GT216 [GeForce GT 220] [10de:0a20] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:832f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
[virtual] Expansion ROM at f7c00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be2] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:832f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7cfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at f4eff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f4ef8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at f7df0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8413]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7efe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
0a:02.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f4ffe000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: bttv
0a:02.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f4fff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: snd_bt87x
0a:04.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7fff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c51] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: i7core_edac
3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 004 Device 004: ID 0424:2640 Standard Microsystems Corp. USB 2.0 Hub
Bus 004 Device 005: ID 0424:4060 Standard Microsystems Corp. Ultra Fast Media Reader
Bus 004 Device 006: ID 046d:c401 Logitech, Inc. TrackMan Marble Wheel
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.1.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.1.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.1.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.1.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.1 <none>
Versions of packages linux-image-3.1.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv 0.34
pn firmware-iwlwifi <none>
pn firmware-linux 0.34
pn firmware-linux-nonfree 0.34
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false
linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true
linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1-amd64 (Debian 3.1.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Tue Nov 29 13:47:12 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/vg_saturn-root ro ipv6.disable=1 single
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe70000 (usable)
[ 0.000000] BIOS-e820: 00000000dfe70000 - 00000000dfe88000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfe88000 - 00000000dfedc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfedc000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P7P55D-E, BIOS 1504 12/14/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe70000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfe70000 page 4k
[ 0.000000] kernel direct mapping tables up to dfe70000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ dfe66000-dfe70000
[ 0.000000] RAMDISK: 368ee000 - 3746f000
[ 0.000000] ACPI: RSDP 00000000000fb920 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000dfe70100 0006C (v01 121410 XSDT1514 20101214 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dfe70290 000F4 (v03 121410 FACP1514 20101214 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dfe704a0 0EF6A (v01 A1511 A1511001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000dfe88000 00040
[ 0.000000] ACPI: APIC 00000000dfe70390 000CC (v01 121410 APIC1514 20101214 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dfe70460 0003C (v01 121410 OEMMCFG 20101214 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dfe88040 00072 (v01 121410 OEMB1514 20101214 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000dfe7f410 00038 (v01 121410 OEMHPET 20101214 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000dfe880c0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000dfe7f6b0 00034 (v06 121410 PerfTune 20101214 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000dfe7f6f0 000B0 (v01 121410 OEMOSFR 20101214 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000dfe89760 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217600000-ffff88021e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dfe70
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2096638
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898728 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfe70000 - 00000000dfe88000
[ 0.000000] PM: Registered nosave memory: 00000000dfe88000 - 00000000dfedc000
[ 0.000000] PM: Registered nosave memory: 00000000dfedc000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021fc00000 s80768 r8192 d21632 u131072
[ 0.000000] pcpu-alloc: s80768 r8192 d21632 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066169
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.0-1-amd64 root=/dev/mapper/vg_saturn-root ro ipv6.disable=1 single
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /home/blank/debian/kernel/release/linux-2.6/linux-2.6-3.1.4/debian/build/source_amd64_none/drivers/iommu/dmar.c:634 warn_invalid_dmar+0x77/0x85()
[ 0.000000] Hardware name: System Product Name
[ 0.000000] Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
[ 0.000000] BIOS vendor: American Megatrends Inc.; Ver: 1504 ; Product Version: System Version
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 3.1.0-1-amd64 #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81045775>] ? warn_slowpath_common+0x78/0x8c
[ 0.000000] [<ffffffff810457d7>] ? warn_slowpath_fmt_taint+0x3d/0x42
[ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8
[ 0.000000] [<ffffffff816b7917>] ? __early_set_fixmap+0x89/0x8d
[ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8
[ 0.000000] [<ffffffff816b7917>] ? __early_set_fixmap+0x89/0x8d
[ 0.000000] [<ffffffff81326c31>] ? __pte+0x7/0x8
[ 0.000000] [<ffffffff8125710d>] ? warn_invalid_dmar+0x77/0x85
[ 0.000000] [<ffffffff816b7d24>] ? early_iounmap+0xc5/0x114
[ 0.000000] [<ffffffff816d7748>] ? check_zero_address+0xb0/0xeb
[ 0.000000] [<ffffffff81336c66>] ? bad_to_user+0x620/0x620
[ 0.000000] [<ffffffff816d7794>] ? detect_intel_iommu+0x11/0xa6
[ 0.000000] [<ffffffff816abd7b>] ? pci_iommu_alloc+0x3f/0x67
[ 0.000000] [<ffffffff816b76f6>] ? mem_init+0x14/0xe5
[ 0.000000] [<ffffffff816a5961>] ? start_kernel+0x1d0/0x3c8
[ 0.000000] [<ffffffff816a5140>] ? early_idt_handlers+0x140/0x140
[ 0.000000] [<ffffffff816a53c4>] ? x86_64_start_kernel+0x104/0x111
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] Memory: 8181744k/8912896k available (3291k kernel code, 526344k absent, 204808k reserved, 3428k data, 556k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2675.167 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5350.33 BogoMIPS (lpj=10700668)
[ 0.000125] pid_max: default: 32768 minimum: 301
[ 0.000218] Security Framework initialized
[ 0.000923] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002537] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003305] Mount-cache hash table entries: 256
[ 0.003467] Initializing cgroup subsys cpuacct
[ 0.003530] Initializing cgroup subsys memory
[ 0.003601] Initializing cgroup subsys devices
[ 0.003661] Initializing cgroup subsys freezer
[ 0.003721] Initializing cgroup subsys net_cls
[ 0.003780] Initializing cgroup subsys blkio
[ 0.003863] CPU: Physical Processor ID: 0
[ 0.003921] CPU: Processor Core ID: 0
[ 0.003982] mce: CPU supports 9 MCE banks
[ 0.004048] CPU0: Thermal monitoring enabled (TM1)
[ 0.004113] using mwait in idle threads.
[ 0.004497] ACPI: Core revision 20110623
[ 0.112816] DMAR: Host address width 36
[ 0.112876] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.112945] DMAR: parse DMAR table failure.
[ 0.113005] Switched APIC routing to physical flat.
[ 0.113387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.153050] CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05
[ 0.259931] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[ 0.260171] ... version: 3
[ 0.260230] ... bit width: 48
[ 0.260289] ... generic registers: 4
[ 0.260347] ... value mask: 0000ffffffffffff
[ 0.260407] ... max period: 000000007fffffff
[ 0.260467] ... fixed-purpose events: 3
[ 0.260526] ... event mask: 000000070000000f
[ 0.260819] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.260967] Booting Node 0, Processors #1
[ 0.261054] smpboot cpu 1: start_ip = 99000
[ 0.371815] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.371970] #2
[ 0.372014] smpboot cpu 2: start_ip = 99000
[ 0.479599] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.479752] #3
[ 0.479796] smpboot cpu 3: start_ip = 99000
[ 0.587281] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.587370] Brought up 4 CPUs
[ 0.587427] Total of 4 processors activated (21399.27 BogoMIPS).
[ 0.589329] devtmpfs: initialized
[ 0.592603] PM: Registering ACPI NVS region at dfe88000 (344064 bytes)
[ 0.598553] print_constraints: dummy:
[ 0.598658] NET: Registered protocol family 16
[ 0.598798] ACPI: bus type pci registered
[ 0.598911] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.598991] PCI: not using MMCONFIG
[ 0.599049] PCI: Using configuration type 1 for base access
[ 0.599632] bio: create slab <bio-0> at 0
[ 0.599775] ACPI: Added _OSI(Module Device)
[ 0.599835] ACPI: Added _OSI(Processor Device)
[ 0.599895] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.599955] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.601187] ACPI: EC: Look up EC in DSDT
[ 0.602355] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.612984] ACPI: SSDT 00000000dfe88150 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.613484] ACPI: Dynamic OEM Table Load:
[ 0.613622] ACPI: SSDT (null) 01130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.613862] ACPI: SSDT 00000000dfe89280 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.614303] ACPI: Dynamic OEM Table Load:
[ 0.614441] ACPI: SSDT (null) 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.614910] ACPI: Interpreter enabled
[ 0.614971] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.615252] ACPI: Using IOAPIC for interrupt routing
[ 0.615331] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.616626] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.627825] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.628032] ACPI: No dock devices found.
[ 0.628091] HEST: Table not found.
[ 0.628149] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.628422] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.628649] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.628713] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.628776] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.628853] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.628930] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.629007] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed8ffff]
[ 0.629093] pci 0000:00:00.0: [8086:d131] type 0 class 0x000600
[ 0.629136] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604
[ 0.629171] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.629174] pci 0000:00:03.0: PME# disabled
[ 0.629192] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880
[ 0.629239] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880
[ 0.629285] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880
[ 0.629330] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880
[ 0.629374] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880
[ 0.629412] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880
[ 0.629470] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.629489] pci 0000:00:1a.0: reg 10: [mem 0xf5ffe000-0xf5ffe3ff]
[ 0.629554] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.629558] pci 0000:00:1a.0: PME# disabled
[ 0.629580] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.629593] pci 0000:00:1b.0: reg 10: [mem 0xf5ff8000-0xf5ffbfff 64bit]
[ 0.629641] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.629644] pci 0000:00:1b.0: PME# disabled
[ 0.629663] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.629711] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.629715] pci 0000:00:1c.0: PME# disabled
[ 0.629734] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.629782] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.629785] pci 0000:00:1c.1: PME# disabled
[ 0.629804] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 0.629852] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.629856] pci 0000:00:1c.2: PME# disabled
[ 0.629874] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.629923] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.629926] pci 0000:00:1c.3: PME# disabled
[ 0.629945] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.629992] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.629996] pci 0000:00:1c.4: PME# disabled
[ 0.630014] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[ 0.630062] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.630065] pci 0000:00:1c.5: PME# disabled
[ 0.630084] pci 0000:00:1c.6: [8086:3b4e] type 1 class 0x000604
[ 0.630132] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.630135] pci 0000:00:1c.6: PME# disabled
[ 0.630154] pci 0000:00:1c.7: [8086:3b50] type 1 class 0x000604
[ 0.630201] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.630204] pci 0000:00:1c.7: PME# disabled
[ 0.630228] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.630247] pci 0000:00:1d.0: reg 10: [mem 0xf5ffd000-0xf5ffd3ff]
[ 0.630312] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.630316] pci 0000:00:1d.0: PME# disabled
[ 0.630334] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.630384] pci 0000:00:1f.0: [8086:3b02] type 0 class 0x000601
[ 0.630489] pci 0000:00:1f.2: [8086:3b22] type 0 class 0x000106
[ 0.630505] pci 0000:00:1f.2: reg 10: [io 0xb880-0xb887]
[ 0.630512] pci 0000:00:1f.2: reg 14: [io 0xb800-0xb803]
[ 0.630519] pci 0000:00:1f.2: reg 18: [io 0xb480-0xb487]
[ 0.630526] pci 0000:00:1f.2: reg 1c: [io 0xb400-0xb403]
[ 0.630533] pci 0000:00:1f.2: reg 20: [io 0xb080-0xb09f]
[ 0.630540] pci 0000:00:1f.2: reg 24: [mem 0xf5ff7000-0xf5ff77ff]
[ 0.630569] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.630572] pci 0000:00:1f.2: PME# disabled
[ 0.630587] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.630601] pci 0000:00:1f.3: reg 10: [mem 0xf5ffc000-0xf5ffc0ff 64bit]
[ 0.630619] pci 0000:00:1f.3: reg 20: [io 0xffe0-0xffff]
[ 0.630677] pci 0000:01:00.0: [10de:0a20] type 0 class 0x000300
[ 0.630686] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.630695] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.630705] pci 0000:01:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.630711] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f]
[ 0.630718] pci 0000:01:00.0: reg 30: [mem 0xf7c00000-0xf7c7ffff pref]
[ 0.630757] pci 0000:01:00.1: [10de:0be2] type 0 class 0x000403
[ 0.630766] pci 0000:01:00.1: reg 10: [mem 0xf7cfc000-0xf7cfffff]
[ 0.635136] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.635206] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.635209] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf7cfffff]
[ 0.635213] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf3ffffff 64bit pref]
[ 0.635249] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
[ 0.635352] pci 0000:00:1c.1: PCI bridge to [bus 08-08]
[ 0.635452] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[ 0.635553] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.635678] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[ 0.635703] pci 0000:05:00.0: reg 10: [mem 0xf7efe000-0xf7efffff 64bit]
[ 0.635806] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.635811] pci 0000:05:00.0: PME# disabled
[ 0.643123] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.643195] pci 0000:00:1c.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.643235] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.643335] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 0.643453] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.643468] pci 0000:02:00.0: reg 10: [io 0xd800-0xd8ff]
[ 0.643494] pci 0000:02:00.0: reg 18: [mem 0xf4eff000-0xf4efffff 64bit pref]
[ 0.643511] pci 0000:02:00.0: reg 20: [mem 0xf4ef8000-0xf4efbfff 64bit pref]
[ 0.643523] pci 0000:02:00.0: reg 30: [mem 0xf7df0000-0xf7dfffff pref]
[ 0.643559] pci 0000:02:00.0: supports D1 D2
[ 0.643561] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.643566] pci 0000:02:00.0: PME# disabled
[ 0.651112] pci 0000:00:1c.7: PCI bridge to [bus 02-02]
[ 0.651183] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.651186] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.651191] pci 0000:00:1c.7: bridge window [mem 0xf4e00000-0xf4efffff 64bit pref]
[ 0.651219] pci 0000:0a:02.0: [109e:036e] type 0 class 0x000400
[ 0.651231] pci 0000:0a:02.0: reg 10: [mem 0xf4ffe000-0xf4ffefff pref]
[ 0.651288] pci 0000:0a:02.1: [109e:0878] type 0 class 0x000480
[ 0.651300] pci 0000:0a:02.1: reg 10: [mem 0xf4fff000-0xf4ffffff pref]
[ 0.651367] pci 0000:0a:04.0: [1106:3044] type 0 class 0x000c00
[ 0.651383] pci 0000:0a:04.0: reg 10: [mem 0xf7fff000-0xf7fff7ff]
[ 0.651393] pci 0000:0a:04.0: reg 14: [io 0xec00-0xec7f]
[ 0.651447] pci 0000:0a:04.0: supports D2
[ 0.651449] pci 0000:0a:04.0: PME# supported from D2 D3hot D3cold
[ 0.651453] pci 0000:0a:04.0: PME# disabled
[ 0.651488] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.651554] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.651558] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.651563] pci 0000:00:1e.0: bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
[ 0.651565] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.651567] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.651569] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.651572] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.651574] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.651576] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
[ 0.651612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.651819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 0.651901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT]
[ 0.651934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT]
[ 0.651968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT]
[ 0.652003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.652036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 0.652069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 0.652102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[ 0.652143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[ 0.652183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.652330] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.652598] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.652676] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.665151] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.665690] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.665906] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.666444] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.666982] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.667618] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.668156] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.668695] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.669280] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.669361] vgaarb: loaded
[ 0.669417] vgaarb: bridge control possible 0000:01:00.0
[ 0.669504] PCI: Using ACPI for IRQ routing
[ 0.670737] PCI: Discovered peer bus 3f
[ 0.670821] pci 0000:3f:00.0: [8086:2c51] type 0 class 0x000600
[ 0.670838] pci 0000:3f:00.1: [8086:2c81] type 0 class 0x000600
[ 0.670855] pci 0000:3f:02.0: [8086:2c90] type 0 class 0x000600
[ 0.670870] pci 0000:3f:02.1: [8086:2c91] type 0 class 0x000600
[ 0.670886] pci 0000:3f:03.0: [8086:2c98] type 0 class 0x000600
[ 0.670901] pci 0000:3f:03.1: [8086:2c99] type 0 class 0x000600
[ 0.670917] pci 0000:3f:03.4: [8086:2c9c] type 0 class 0x000600
[ 0.670933] pci 0000:3f:04.0: [8086:2ca0] type 0 class 0x000600
[ 0.670948] pci 0000:3f:04.1: [8086:2ca1] type 0 class 0x000600
[ 0.670963] pci 0000:3f:04.2: [8086:2ca2] type 0 class 0x000600
[ 0.670978] pci 0000:3f:04.3: [8086:2ca3] type 0 class 0x000600
[ 0.670994] pci 0000:3f:05.0: [8086:2ca8] type 0 class 0x000600
[ 0.671010] pci 0000:3f:05.1: [8086:2ca9] type 0 class 0x000600
[ 0.671025] pci 0000:3f:05.2: [8086:2caa] type 0 class 0x000600
[ 0.671040] pci 0000:3f:05.3: [8086:2cab] type 0 class 0x000600
[ 0.671360] PCI: pci_cache_line_size set to 64 bytes
[ 0.671460] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.671462] reserve RAM buffer: 00000000dfe70000 - 00000000dfffffff
[ 0.671562] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.671632] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.672053] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.675076] hpet: hpet2 irq 40 for MSI
[ 0.675225] hpet: hpet3 irq 41 for MSI
[ 0.679236] hpet: hpet4 irq 42 for MSI
[ 0.683130] hpet: hpet5 irq 43 for MSI
[ 0.683156] Switching to clocksource hpet
[ 0.684616] pnp: PnP ACPI init
[ 0.684682] ACPI: bus type pnp registered
[ 0.684824] pnp 00:00: [bus 00-ff]
[ 0.684826] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.684828] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.684831] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.684833] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.684835] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.684836] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.684838] pnp 00:00: [mem 0xfc000000-0xfed8ffff window]
[ 0.684876] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.684885] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.684928] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.684992] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.685020] pnp 00:02: [dma 4]
[ 0.685021] pnp 00:02: [io 0x0000-0x000f]
[ 0.685023] pnp 00:02: [io 0x0081-0x0083]
[ 0.685025] pnp 00:02: [io 0x0087]
[ 0.685027] pnp 00:02: [io 0x0089-0x008b]
[ 0.685028] pnp 00:02: [io 0x008f]
[ 0.685030] pnp 00:02: [io 0x00c0-0x00df]
[ 0.685052] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.685061] pnp 00:03: [io 0x0070-0x0071]
[ 0.685067] pnp 00:03: [irq 8]
[ 0.685088] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.685096] pnp 00:04: [io 0x0061]
[ 0.685117] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.685125] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.685130] pnp 00:05: [irq 13]
[ 0.685150] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.685330] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.685332] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.685334] pnp 00:06: [io 0x0290-0x029f]
[ 0.685380] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.685443] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.685608] pnp 00:07: [io 0x0010-0x001f]
[ 0.685609] pnp 00:07: [io 0x0022-0x003f]
[ 0.685611] pnp 00:07: [io 0x0044-0x004d]
[ 0.685613] pnp 00:07: [io 0x0050-0x005f]
[ 0.685614] pnp 00:07: [io 0x0063]
[ 0.685616] pnp 00:07: [io 0x0065]
[ 0.685617] pnp 00:07: [io 0x0067-0x006f]
[ 0.685619] pnp 00:07: [io 0x0072-0x007f]
[ 0.685620] pnp 00:07: [io 0x0080]
[ 0.685623] pnp 00:07: [io 0x0084-0x0086]
[ 0.685624] pnp 00:07: [io 0x0088]
[ 0.685626] pnp 00:07: [io 0x008c-0x008e]
[ 0.685627] pnp 00:07: [io 0x0090-0x009f]
[ 0.685629] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.685630] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.685632] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.685634] pnp 00:07: [io 0x0800-0x087f]
[ 0.685635] pnp 00:07: [io 0xffe0-0xffdf disabled]
[ 0.685637] pnp 00:07: [io 0x0500-0x057f]
[ 0.685638] pnp 00:07: [io 0x0600-0x0607]
[ 0.685640] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.685642] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.685644] pnp 00:07: [mem 0xfed40000-0xfed8ffff]
[ 0.685707] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.685770] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.685833] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.685897] system 00:07: [io 0x0600-0x0607] has been reserved
[ 0.685960] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.686024] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.686088] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.686152] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.686216] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.686241] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.686289] pnp 00:09: [mem 0xffa00000-0xffbfffff]
[ 0.686291] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.686314] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.686352] pnp 00:0a: [mem 0xffc00000-0xffdfffff]
[ 0.686398] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.686463] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.686714] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.686719] pnp 00:0b: [irq 4]
[ 0.686721] pnp 00:0b: [dma 0 disabled]
[ 0.686785] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.686864] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.686866] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.686913] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.686977] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.687051] Switched to NOHz mode on CPU #0
[ 0.687108] Switched to NOHz mode on CPU #3
[ 0.687142] Switched to NOHz mode on CPU #1
[ 0.687185] Switched to NOHz mode on CPU #2
[ 0.687295] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.687325] pnp 00:0d: [io 0x0060]
[ 0.687327] pnp 00:0d: [io 0x0064]
[ 0.687332] pnp 00:0d: [irq 1]
[ 0.687362] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.687410] pnp 00:0e: [mem 0xf8000000-0xfbffffff]
[ 0.687457] system 00:0e: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.687521] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.687691] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.687693] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.687695] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.687696] pnp 00:0f: [mem 0x00100000-0xdfffffff]
[ 0.687698] pnp 00:0f: [mem 0xfed90000-0xffffffff]
[ 0.687758] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.687823] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.687887] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.687952] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.688017] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.688082] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.688204] pnp: PnP ACPI: found 16 devices
[ 0.688263] ACPI: ACPI bus type pnp unregistered
[ 0.694634] PCI: max bus depth: 1 pci_try_num: 2
[ 0.694693] pci 0000:00:1c.3: BAR 14: assigned [mem 0xf4000000-0xf41fffff]
[ 0.694758] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
[ 0.694837] pci 0000:00:1c.3: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.694900] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf4400000-0xf45fffff]
[ 0.694964] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref]
[ 0.695042] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.695105] pci 0000:00:1c.1: BAR 14: assigned [mem 0xf4800000-0xf49fffff]
[ 0.695170] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4a00000-0xf4bfffff 64bit pref]
[ 0.695255] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.695318] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4c00000-0xf4dfffff]
[ 0.695383] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf5000000-0xf51fffff 64bit pref]
[ 0.695462] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.695525] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.695587] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.695650] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf7cfffff]
[ 0.695715] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf3ffffff 64bit pref]
[ 0.695794] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
[ 0.695855] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.695919] pci 0000:00:1c.0: bridge window [mem 0xf4c00000-0xf4dfffff]
[ 0.695984] pci 0000:00:1c.0: bridge window [mem 0xf5000000-0xf51fffff 64bit pref]
[ 0.696064] pci 0000:00:1c.1: PCI bridge to [bus 08-08]
[ 0.696126] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.696191] pci 0000:00:1c.1: bridge window [mem 0xf4800000-0xf49fffff]
[ 0.696256] pci 0000:00:1c.1: bridge window [mem 0xf4a00000-0xf4bfffff 64bit pref]
[ 0.696336] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[ 0.696397] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.696461] pci 0000:00:1c.2: bridge window [mem 0xf4400000-0xf45fffff]
[ 0.696526] pci 0000:00:1c.2: bridge window [mem 0xf4600000-0xf47fffff 64bit pref]
[ 0.696606] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.696667] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.696732] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf41fffff]
[ 0.696796] pci 0000:00:1c.3: bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
[ 0.696877] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.696940] pci 0000:00:1c.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.697008] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.697076] pci 0000:00:1c.6: PCI bridge to [bus 03-03]
[ 0.697144] pci 0000:00:1c.7: PCI bridge to [bus 02-02]
[ 0.697206] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
[ 0.697270] pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.697335] pci 0000:00:1c.7: bridge window [mem 0xf4e00000-0xf4efffff 64bit pref]
[ 0.697416] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.697477] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.697542] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.697607] pci 0000:00:1e.0: bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
[ 0.697695] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.697760] pci 0000:00:03.0: setting latency timer to 64
[ 0.697765] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.697831] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.697896] pci 0000:00:1c.0: setting latency timer to 64
[ 0.697900] pci 0000:00:1c.1: enabling device (0104 -> 0107)
[ 0.697963] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.698028] pci 0000:00:1c.1: setting latency timer to 64
[ 0.698032] pci 0000:00:1c.2: enabling device (0104 -> 0107)
[ 0.698099] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.698163] pci 0000:00:1c.2: setting latency timer to 64
[ 0.698168] pci 0000:00:1c.3: enabling device (0104 -> 0107)
[ 0.698234] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.698299] pci 0000:00:1c.3: setting latency timer to 64
[ 0.698304] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.698368] pci 0000:00:1c.4: setting latency timer to 64
[ 0.698373] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.698438] pci 0000:00:1c.5: setting latency timer to 64
[ 0.698443] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.698507] pci 0000:00:1c.6: setting latency timer to 64
[ 0.698512] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.698577] pci 0000:00:1c.7: setting latency timer to 64
[ 0.698582] pci 0000:00:1e.0: setting latency timer to 64
[ 0.698585] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.698587] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.698589] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.698591] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.698592] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 0.698594] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.698596] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.698598] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf7cfffff]
[ 0.698600] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf3ffffff 64bit pref]
[ 0.698602] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
[ 0.698603] pci_bus 0000:09: resource 1 [mem 0xf4c00000-0xf4dfffff]
[ 0.698605] pci_bus 0000:09: resource 2 [mem 0xf5000000-0xf51fffff 64bit pref]
[ 0.698607] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.698609] pci_bus 0000:08: resource 1 [mem 0xf4800000-0xf49fffff]
[ 0.698611] pci_bus 0000:08: resource 2 [mem 0xf4a00000-0xf4bfffff 64bit pref]
[ 0.698612] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.698614] pci_bus 0000:07: resource 1 [mem 0xf4400000-0xf45fffff]
[ 0.698616] pci_bus 0000:07: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref]
[ 0.698618] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.698619] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf41fffff]
[ 0.698621] pci_bus 0000:06: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
[ 0.698623] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.698625] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.698627] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.698629] pci_bus 0000:02: resource 2 [mem 0xf4e00000-0xf4efffff 64bit pref]
[ 0.698630] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
[ 0.698632] pci_bus 0000:0a: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.698634] pci_bus 0000:0a: resource 2 [mem 0xf4f00000-0xf4ffffff 64bit pref]
[ 0.698636] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.698638] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.698639] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.698641] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.698643] pci_bus 0000:0a: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 0.698645] pci_bus 0000:0a: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.698646] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff]
[ 0.698648] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.698699] NET: Registered protocol family 2
[ 0.698942] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.699880] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.702258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.702601] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.708425] TCP reno registered
[ 0.708495] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.708616] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.708833] NET: Registered protocol family 1
[ 0.708985] pci 0000:01:00.0: Boot video device
[ 0.709044] PCI: CLS 32 bytes, default 64
[ 0.709077] Unpacking initramfs...
[ 0.924585] Freeing initrd memory: 11780k freed
[ 0.926286] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.926353] Placing 64MB software IO TLB between ffff8800dbe66000 - ffff8800dfe66000
[ 0.926430] software IO TLB at phys 0xdbe66000 - 0xdfe66000
[ 0.926936] audit: initializing netlink socket (disabled)
[ 0.927010] type=2000 audit(1322994694.676:1): initialized
[ 0.949513] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.968322] VFS: Disk quotas dquot_6.5.2
[ 0.968410] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.968530] msgmni has been set to 16002
[ 0.968705] alg: No test for stdrng (krng)
[ 0.968789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.968867] io scheduler noop registered
[ 0.968926] io scheduler deadline registered
[ 0.968998] io scheduler cfq registered (default)
[ 0.969522] intel_idle: MWAIT substates: 0x1120
[ 0.969528] intel_idle: v0.4 model 0x1E
[ 0.969529] intel_idle: lapic_timer_reliable_states 0x2
[ 0.969575] ERST: Table is not found!
[ 0.969633] GHES: HEST is not enabled!
[ 0.969745] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.990141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.130840] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.166437] Linux agpgart interface v0.103
[ 1.166613] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.166677] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.167232] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.167375] mousedev: PS/2 mouse device common for all mice
[ 1.167469] rtc_cmos 00:03: RTC can wake from S4
[ 1.167619] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.167704] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.167865] cpuidle: using governor ladder
[ 1.168064] cpuidle: using governor menu
[ 1.168269] TCP cubic registered
[ 1.168326] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 1.168403] Mobile IPv6
[ 1.168459] mip6_init: can't add xfrm type(destopt)
[ 1.168519] NET: Registered protocol family 17
[ 1.168581] Registering the dns_resolver key type
[ 1.169019] PM: Hibernation image not present or could not be loaded.
[ 1.169039] registered taskstats version 1
[ 1.177757] rtc_cmos 00:03: setting system clock to 2011-12-04 10:31:35 UTC (1322994695)
[ 1.177866] Initializing network drop monitor service
[ 1.179362] Freeing unused kernel memory: 556k freed
[ 1.179483] Write protecting the kernel read-only data: 6144k
[ 1.182974] Freeing unused kernel memory: 788k freed
[ 1.185977] Freeing unused kernel memory: 700k freed
[ 1.193526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.243609] udevd[62]: starting version 175
[ 1.266851] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.266934] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.267022] r8169 0000:02:00.0: setting latency timer to 64
[ 1.267071] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1.267235] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000c1c000, e0:cb:4e:25:19:a7, XID 083000c0 IRQ 45
[ 1.268156] SCSI subsystem initialized
[ 1.271629] usbcore: registered new interface driver usbfs
[ 1.271706] usbcore: registered new interface driver hub
[ 1.274514] usbcore: registered new device driver usb
[ 1.274877] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.274959] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.275039] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.275042] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.275122] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.275225] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.276470] libata version 3.00 loaded.
[ 1.279213] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 1.280563] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5ffe000
[ 1.289250] firewire_ohci 0000:0a:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.293954] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.294042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.294106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.294183] usb usb1: Product: EHCI Host Controller
[ 1.294244] usb usb1: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[ 1.294306] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.294495] hub 1-0:1.0: USB hub found
[ 1.294558] hub 1-0:1.0: 2 ports detected
[ 1.294690] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.294765] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.294768] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.294834] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.294933] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.298879] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 1.298893] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5ffd000
[ 1.314148] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.314239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.314303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.314380] usb usb2: Product: EHCI Host Controller
[ 1.314441] usb usb2: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[ 1.314502] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.314815] hub 2-0:1.0: USB hub found
[ 1.314885] hub 2-0:1.0: 2 ports detected
[ 1.315052] ahci 0000:00:1f.2: version 3.0
[ 1.315067] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 1.315165] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 1.315193] ahci: SSS flag set, parallel bus scan disabled
[ 1.330135] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.330215] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
[ 1.330297] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.349967] firewire_ohci: Added fw-ohci device 0000:0a:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 1.370510] scsi0 : ahci
[ 1.371029] scsi1 : ahci
[ 1.371327] scsi2 : ahci
[ 1.371597] scsi3 : ahci
[ 1.371887] scsi4 : ahci
[ 1.372057] scsi5 : ahci
[ 1.372244] ata1: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7100 irq 46
[ 1.372322] ata2: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7180 irq 46
[ 1.372401] ata3: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7200 irq 46
[ 1.372480] ata4: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7280 irq 46
[ 1.372559] ata5: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7300 irq 46
[ 1.372638] ata6: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7380 irq 46
[ 1.372730] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.372808] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 1.372812] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.372878] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 1.373109] xhci_hcd 0000:05:00.0: irq 16, io mem 0xf7efe000
[ 1.373225] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X
[ 1.373230] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
[ 1.373235] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 1.373239] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 1.373245] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
[ 1.373330] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.373395] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.373472] usb usb3: Product: xHCI Host Controller
[ 1.373532] usb usb3: Manufacturer: Linux 3.1.0-1-amd64 xhci_hcd
[ 1.373594] usb usb3: SerialNumber: 0000:05:00.0
[ 1.373748] xHCI xhci_add_endpoint called for root hub
[ 1.373750] xHCI xhci_check_bandwidth called for root hub
[ 1.373784] hub 3-0:1.0: USB hub found
[ 1.373849] hub 3-0:1.0: 2 ports detected
[ 1.373959] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.374023] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[ 1.376442] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.376507] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.376583] usb usb4: Product: xHCI Host Controller
[ 1.376644] usb usb4: Manufacturer: Linux 3.1.0-1-amd64 xhci_hcd
[ 1.376706] usb usb4: SerialNumber: 0000:05:00.0
[ 1.376878] xHCI xhci_add_endpoint called for root hub
[ 1.376880] xHCI xhci_check_bandwidth called for root hub
[ 1.376904] hub 4-0:1.0: USB hub found
[ 1.376971] hub 4-0:1.0: 2 ports detected
[ 1.605393] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.737416] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.737489] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.737894] hub 1-1:1.0: USB hub found
[ 1.738153] hub 1-1:1.0: 6 ports detected
[ 1.848932] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 1.849252] firewire_core: created device fw0: GUID 001e8c0000c23e4a, S400
[ 1.860897] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.866788] ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
[ 1.866861] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.872918] ata1.00: configured for UDMA/133
[ 1.873351] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 1.920660] Refined TSC clocksource calibration: 2674.967 MHz.
[ 1.920732] Switching to clocksource tsc
[ 1.980912] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.980986] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.981513] hub 2-1:1.0: USB hub found
[ 1.981774] hub 2-1:1.0: 8 ports detected
[ 2.252088] usb 2-1.7: new high speed USB device number 3 using ehci_hcd
[ 2.344159] usb 2-1.7: New USB device found, idVendor=0424, idProduct=2514
[ 2.344233] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.344642] hub 2-1.7:1.0: USB hub found
[ 2.344889] hub 2-1.7:1.0: 3 ports detected
[ 2.363779] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.369663] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
[ 2.369736] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.375573] ata2.00: configured for UDMA/133
[ 2.375945] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 2.615334] usb 2-1.7.1: new high speed USB device number 4 using ehci_hcd
[ 2.727351] usb 2-1.7.1: New USB device found, idVendor=0424, idProduct=2640
[ 2.727426] usb 2-1.7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.727840] hub 2-1.7.1:1.0: USB hub found
[ 2.728092] hub 2-1.7.1:1.0: 3 ports detected
[ 2.866711] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.869857] ata3.00: ATAPI: PLEXTOR BD-R PX-B940SA, 1.03, max UDMA/100
[ 2.873229] ata3.00: configured for UDMA/100
[ 2.883479] scsi 2:0:0:0: CD-ROM PLEXTOR BD-R PX-B940SA 1.03 PQ: 0 ANSI: 5
[ 2.998546] usb 2-1.7.1.1: new high speed USB device number 5 using ehci_hcd
[ 3.137003] usb 2-1.7.1.1: New USB device found, idVendor=0424, idProduct=4060
[ 3.137091] usb 2-1.7.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.137173] usb 2-1.7.1.1: Product: Ultra Fast Media Reader
[ 3.137234] usb 2-1.7.1.1: Manufacturer: Generic
[ 3.137294] usb 2-1.7.1.1: SerialNumber: 000000264001
[ 3.139671] usbcore: registered new interface driver uas
[ 3.201957] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.222075] usb 2-1.7.1.2: new low speed USB device number 6 using ehci_hcd
[ 3.335461] usb 2-1.7.1.2: New USB device found, idVendor=046d, idProduct=c401
[ 3.335550] usb 2-1.7.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.335632] usb 2-1.7.1.2: Product: USB-PS/2 Trackball
[ 3.335692] usb 2-1.7.1.2: Manufacturer: Logitech
[ 3.521281] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.840603] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.841796] Initializing USB Mass Storage driver...
[ 3.842060] scsi6 : usb-storage 2-1.7.1.1:1.0
[ 3.842184] usbcore: registered new interface driver usb-storage
[ 3.842247] USB Mass Storage support registered.
[ 3.843871] input: Logitech USB-PS/2 Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.1/2-1.7.1.2/2-1.7.1.2:1.0/input/input1
[ 3.844092] generic-usb 0003:046D:C401.0001: input,hidraw0: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:1d.0-1.7.1.2/input0
[ 3.844193] usbcore: registered new interface driver usbhid
[ 3.844255] usbhid: USB HID core driver
[ 3.844266] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.844283] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.844302] sd 0:0:0:0: [sda] Write Protect is off
[ 3.844304] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.844318] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.844320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.844323] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.844338] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.849117] sdb: sdb1 sdb2 sdb3 sdb4
[ 3.850057] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.861482] sda: sda1 sda2 sda3 sda4
[ 3.862835] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.879420] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.879525] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.879779] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.296891] md: raid0 personality registered for level 0
[ 4.298391] md: raid1 personality registered for level 1
[ 4.339910] md: md0 stopped.
[ 4.340741] md: bind<sdb2>
[ 4.341003] md: bind<sda2>
[ 4.342540] bio: create slab <bio-1> at 1
[ 4.342659] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.342732] md0: detected capacity change from 0 to 262078464
[ 4.343331] md0: unknown partition table
[ 4.346589] md: md1 stopped.
[ 4.347178] md: bind<sdb3>
[ 4.347348] md: bind<sda3>
[ 4.348752] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.348826] md1: detected capacity change from 0 to 644245028864
[ 4.349486] md1: unknown partition table
[ 4.414623] md: md2 stopped.
[ 4.415195] md: bind<sdb4>
[ 4.415356] md: bind<sda4>
[ 4.417011] md/raid0:md2: looking at sda4
[ 4.417071] md/raid0:md2: comparing sda4(275273600) with sda4(275273600)
[ 4.417175] md/raid0:md2: END
[ 4.417232] md/raid0:md2: ==> UNIQUE
[ 4.417290] md/raid0:md2: 1 zones
[ 4.417348] md/raid0:md2: looking at sdb4
[ 4.417407] md/raid0:md2: comparing sdb4(275273600) with sda4(275273600)
[ 4.417510] md/raid0:md2: EQUAL
[ 4.417604] md/raid0:md2: FINAL 1 zones
[ 4.417664] md/raid0:md2: done.
[ 4.417721] md/raid0:md2: md_size is 550547200 sectors.
[ 4.417782] ******* md2 configuration *********
[ 4.417841] zone0=[sda4/sdb4/]
[ 4.418017] zone offset=0kb device offset=0kb size=275273600kb
[ 4.418080] **********************************
[ 4.418080]
[ 4.418196] md2: detected capacity change from 0 to 281880166400
[ 4.419271] md2: unknown partition table
[ 4.421146] device-mapper: uevent: version 1.0.3
[ 4.421431] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 4.724617] Btrfs loaded
[ 4.846375] scsi 6:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0
[ 4.846672] scsi: killing requests for dead queue
[ 4.846926] scsi: killing requests for dead queue
[ 4.847230] scsi: killing requests for dead queue
[ 4.847381] scsi: killing requests for dead queue
[ 4.847561] scsi: killing requests for dead queue
[ 4.847732] scsi: killing requests for dead queue
[ 4.847911] scsi: killing requests for dead queue
[ 4.848092] scsi: killing requests for dead queue
[ 4.859364] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 5.074030] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.298681] udevd[406]: starting version 175
[ 6.804787] ACPI: acpi_idle yielding to intel_idle
[ 6.811956] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.812039] ACPI: Power Button [PWRB]
[ 6.812128] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.812206] ACPI: Power Button [PWRF]
[ 6.881469] ATK0110 ATK0110:00: EC enabled
[ 6.958258] iTCO_vendor_support: vendor-support=0
[ 6.986769] EDAC MC: Ver: 2.1.0
[ 7.013778] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.074679] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 7.074807] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
[ 7.074945] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.133574] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 7.133668] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 7.133752] EDAC i7core: Driver loaded.
[ 7.310975] snd_bt87x 0000:0a:02.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.311171] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 7.417658] nvidia: module license 'NVIDIA' taints kernel.
[ 7.510687] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.510760] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.510763] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.510925] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
[ 7.664274] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.664402] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 7.664456] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.681203] Linux media interface: v0.10
[ 7.703869] Linux video capture interface: v2.00
[ 7.845806] IR NEC protocol handler initialized
[ 7.846381] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.846459] hda_intel: Disabling MSI
[ 7.846839] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 7.853937] IR RC5(x) protocol handler initialized
[ 7.877946] IR RC6 protocol handler initialized
[ 7.884725] bttv: driver version 0.9.19 loaded
[ 7.884786] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 7.884873] bttv: Bt8xx card found (0).
[ 7.884938] bttv 0000:0a:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.885006] bttv0: Bt878 (rev 2) at 0000:0a:02.0, irq: 17, latency: 64, mmio: 0xf4ffe000
[ 7.885134] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 7.890958] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[ 7.891041] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
[ 7.893521] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 7.926354] tveeprom 1-0050: Hauppauge model 61204, rev B1M , serial# 3176099
[ 7.926419] tveeprom 1-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5)
[ 7.926496] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 7.926558] tveeprom 1-0050: audio processor is None (idx 0)
[ 7.926620] tveeprom 1-0050: has no radio
[ 7.926678] bttv0: Hauppauge eeprom indicates model#61204
[ 7.926739] bttv0: tuner type=5
[ 7.932708] IR JVC protocol handler initialized
[ 7.934521] IR Sony protocol handler initialized
[ 7.956623] IR MCE Keyboard/mouse protocol handler initialized
[ 7.991693] i2c-core: driver [msp3400] using legacy suspend method
[ 7.991756] i2c-core: driver [msp3400] using legacy resume method
[ 7.991865] lirc_dev: IR Remote Control driver registered, major 249
[ 8.054881] IR LIRC bridge handler initialized
[ 8.112196] bttv0: audio absent, no audio device found!
[ 8.114223] i2c-core: driver [tuner] using legacy suspend method
[ 8.114286] i2c-core: driver [tuner] using legacy resume method
[ 8.119104] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 8.148272] tuner-simple 1-0061: creating new instance
[ 8.148334] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 8.149192] bttv0: registered device video0
[ 8.149378] bttv0: registered device vbi0
[ 8.149464] bttv0: PLL: 28636363 => 35468950 .. ok
[ 8.442844] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.546727] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.650405] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.754189] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.803066] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input4
[ 8.803374] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input5
[ 8.803653] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input6
[ 8.803935] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card2/input7
[ 9.418975] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 9.627138] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 9.788517] loop: module loaded
[ 10.540474] Adding 8388604k swap on /dev/mapper/vg_saturn-swap. Priority:-1 extents:1 across:8388604k
[ 11.121746] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 11.185181] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.201680] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.228765] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.833896] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.902794] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.548795] Bridge firewalling registered
[ 12.557825] device eth0 entered promiscuous mode
[ 12.658117] r8169 0000:02:00.0: eth0: link down
[ 12.658183] r8169 0000:02:00.0: eth0: link down
[ 15.337322] r8169 0000:02:00.0: eth0: link up
[ 15.338709] br0: port 1(eth0) entering forwarding state
[ 15.338774] br0: port 1(eth0) entering forwarding state
[ 21.431339] RPC: Registered named UNIX socket transport module.
[ 21.431415] RPC: Registered udp transport module.
[ 21.431474] RPC: Registered tcp transport module.
[ 21.431534] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.501816] FS-Cache: Loaded
[ 21.527790] FS-Cache: Netfs 'nfs' registered for caching
[ 21.542472] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.268720] fuse init (API version 7.17)
Reply to: