Bug#650771: Info received (Patch doesn't solve the problem)
And one more datapoint:
To send the previous message, I had booted 2.6.39-bpo.2-amd64, for which I have both the r8169 and the r8168 driver. It uses the r8169 by default, with the r8168 blacklisted. In this configuration, I had the problem. To get networking working again, I did:
sudo ifdown eth0
sudo rmmod r8169
sudo modprobe r8168
sudo ifup eth0
Then I rebooted the system and booted into the patched 2.6.39. So far, no problems (on boots that have the problem, "link up" messages usually start appearing soon after booting).
dmesg attached
So, to summarize, I've tested with the following kernel configurations:
2.6.39-bpo.2-amd64 with r8169 as shipped by Debian
2.6.39-bpo.2-amd64 with r8168 driver downloaded from Realtek
2.6.39 with unpatched r8169
2.6.39 with patched r8169
With all of these, the problem occurs on some boots and not on others.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39 (inglorion@mithrandir) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Dec 2 21:09:09 PST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.39 root=/dev/mapper/vg--alpha-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M5A87, BIOS 0404 04/19/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ cff8d000-cff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ 22fffe000-230000000
[ 0.000000] RAMDISK: 3784e000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb850 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 00054 (v01 041911 XSDT1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 041911 FACP1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff90460 0CCC6 (v01 A1866 A1866001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cffa8000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0008C (v01 041911 APIC1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90420 0003C (v01 041911 OEMMCFG 20110419 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 041911 OEMB1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff9f8b0 00038 (v01 041911 OEMHPET 20110419 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9f8f0 00898 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fff9000 - 000000022fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096922
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2fa00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83840 r8192 d22656 u262144
[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065557
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39 root=/dev/mapper/vg--alpha-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c0000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c4000000
[ 0.000000] Memory: 8122152k/9175040k available (3273k kernel code, 787352k absent, 265536k reserved, 3416k data, 596k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2400.006 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.01 BogoMIPS (lpj=9600024)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004087] Security Framework initialized
[ 0.004091] SELinux: Disabled at boot.
[ 0.004737] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008131] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009444] Mount-cache hash table entries: 256
[ 0.009570] Initializing cgroup subsys ns
[ 0.009573] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009576] Initializing cgroup subsys cpuacct
[ 0.009580] Initializing cgroup subsys memory
[ 0.009591] Initializing cgroup subsys devices
[ 0.009593] Initializing cgroup subsys freezer
[ 0.009595] Initializing cgroup subsys net_cls
[ 0.009598] Initializing cgroup subsys blkio
[ 0.009635] tseg: 0000000000
[ 0.009646] CPU: Physical Processor ID: 0
[ 0.009647] CPU: Processor Core ID: 0
[ 0.009649] mce: CPU supports 6 MCE banks
[ 0.009658] using C1E aware idle routine
[ 0.010355] ACPI: Core revision 20110316
[ 0.016057] Setting APIC routing to flat
[ 0.016312] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056277] CPU0: AMD Athlon(tm) II X4 610e Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 95000
[ 0.148026] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148028] System has AMD C1E enabled
[ 0.148043] Switch to broadcast mode on CPU1
[ 0.148119] #2
[ 0.148120] smpboot cpu 2: start_ip = 95000
[ 0.240034] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240050] Switch to broadcast mode on CPU2
[ 0.240124] #3
[ 0.240126] smpboot cpu 3: start_ip = 95000
[ 0.332045] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332064] Brought up 4 CPUs
[ 0.332063] Switch to broadcast mode on CPU3
[ 0.332072] Total of 4 processors activated (19199.84 BogoMIPS).
[ 0.332548] Switch to broadcast mode on CPU0
[ 0.332548] devtmpfs: initialized
[ 0.335007] PM: Registering ACPI NVS region at cffa8000 (163840 bytes)
[ 0.335007] print_constraints: dummy:
[ 0.335007] NET: Registered protocol family 16
[ 0.335007] node 0 link 0: io port [1000, ffffff]
[ 0.335007] TOM: 00000000d0000000 aka 3328M
[ 0.335007] Fam 10h mmconf [e0000000, efffffff]
[ 0.335007] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.335007] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.335007] node 0 link 0: mmio [a0000, bffff]
[ 0.335007] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.335007] TOM2: 0000000230000000 aka 8960M
[ 0.335007] bus: [00, 1f] on node 0 link 0
[ 0.335007] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.335007] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.335007] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.335007] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
[ 0.335007] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.335007] Extended Config Space enabled on 1 nodes
[ 0.336033] ACPI: bus type pci registered
[ 0.336078] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.336081] PCI: not using MMCONFIG
[ 0.336082] PCI: Using configuration type 1 for base access
[ 0.336084] PCI: Using configuration type 1 for extended access
[ 0.336529] bio: create slab <bio-0> at 0
[ 0.336874] ACPI: EC: Look up EC in DSDT
[ 0.337982] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.452436] ACPI: Interpreter enabled
[ 0.452440] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.452464] ACPI: Using IOAPIC for interrupt routing
[ 0.452490] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.453345] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.486083] ACPI: No dock devices found.
[ 0.486085] HEST: Table not found.
[ 0.486088] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.486300] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.486491] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.486494] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.486496] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.486499] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.486501] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.486503] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.486518] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.486555] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.486577] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.486580] pci 0000:00:02.0: PME# disabled
[ 0.486594] pci 0000:00:04.0: [1002:597a] type 1 class 0x000604
[ 0.486616] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.486619] pci 0000:00:04.0: PME# disabled
[ 0.486635] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.486657] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.486659] pci 0000:00:0a.0: PME# disabled
[ 0.486681] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.486696] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.486703] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.486711] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.486719] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.486726] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.486734] pci 0000:00:11.0: reg 24: [mem 0xfe9ffc00-0xfe9fffff]
[ 0.486770] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.486780] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.486833] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.486848] pci 0000:00:12.2: reg 10: [mem 0xfe9ff800-0xfe9ff8ff]
[ 0.486899] pci 0000:00:12.2: supports D1 D2
[ 0.486901] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.486904] pci 0000:00:12.2: PME# disabled
[ 0.486923] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.486934] pci 0000:00:13.0: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.486987] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.487001] pci 0000:00:13.2: reg 10: [mem 0xfe9ff400-0xfe9ff4ff]
[ 0.487052] pci 0000:00:13.2: supports D1 D2
[ 0.487054] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.487058] pci 0000:00:13.2: PME# disabled
[ 0.487075] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.487132] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.487148] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.487191] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.487194] pci 0000:00:14.2: PME# disabled
[ 0.487206] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.487263] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.487294] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.487305] pci 0000:00:14.5: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.487355] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.487365] pci 0000:00:16.0: reg 10: [mem 0xfe9f3000-0xfe9f3fff]
[ 0.487418] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.487433] pci 0000:00:16.2: reg 10: [mem 0xfe9ff000-0xfe9ff0ff]
[ 0.487484] pci 0000:00:16.2: supports D1 D2
[ 0.487486] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.487489] pci 0000:00:16.2: PME# disabled
[ 0.487506] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.487521] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.487534] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.487547] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.487561] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.487604] pci 0000:01:00.0: [1002:68ba] type 0 class 0x000300
[ 0.487617] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.487626] pci 0000:01:00.0: reg 18: [mem 0xfeae0000-0xfeafffff 64bit]
[ 0.487633] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.487645] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.487660] pci 0000:01:00.0: supports D1 D2
[ 0.487679] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.487691] pci 0000:01:00.1: reg 10: [mem 0xfeabc000-0xfeabffff 64bit]
[ 0.487730] pci 0000:01:00.1: supports D1 D2
[ 0.492061] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.492067] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.492070] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.492074] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.492119] pci 0000:02:00.0: [1b21:1042] type 0 class 0x000c03
[ 0.492137] pci 0000:02:00.0: reg 10: [mem 0xfebf0000-0xfebf7fff 64bit]
[ 0.492209] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.492213] pci 0000:02:00.0: PME# disabled
[ 0.500062] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.500067] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.500070] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.500074] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.500116] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.500130] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.500150] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.500163] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.500200] pci 0000:03:00.0: supports D1 D2
[ 0.500201] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.500205] pci 0000:03:00.0: PME# disabled
[ 0.508066] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.508071] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.508074] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.508078] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.508131] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.508135] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.508139] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.508142] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.508145] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.508148] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.508150] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.508153] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.508156] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.508158] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.508174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.508443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.508481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.508521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.508562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.508767] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.508939] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.514021] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.514083] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.514145] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.514206] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *9 10 11 14 15)
[ 0.514254] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.514292] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.514329] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.514367] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.514466] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.514469] vgaarb: loaded
[ 0.514502] PCI: Using ACPI for IRQ routing
[ 0.514504] PCI: pci_cache_line_size set to 64 bytes
[ 0.514573] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.514575] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.514672] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.514675] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.516068] Switching to clocksource hpet
[ 0.517494] pnp: PnP ACPI init
[ 0.517512] ACPI: bus type pnp registered
[ 0.517648] pnp 00:00: [bus 00-ff]
[ 0.517650] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.517652] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.517655] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.517657] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.517659] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.517661] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.517663] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.517717] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.517762] pnp 00:01: [dma 4]
[ 0.517764] pnp 00:01: [io 0x0000-0x000f]
[ 0.517766] pnp 00:01: [io 0x0081-0x0083]
[ 0.517768] pnp 00:01: [io 0x0087]
[ 0.517770] pnp 00:01: [io 0x0089-0x008b]
[ 0.517772] pnp 00:01: [io 0x008f]
[ 0.517774] pnp 00:01: [io 0x00c0-0x00df]
[ 0.517799] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.517809] pnp 00:02: [io 0x0070-0x0071]
[ 0.517819] pnp 00:02: [irq 8]
[ 0.517844] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.517852] pnp 00:03: [io 0x0061]
[ 0.517876] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.517885] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.517889] pnp 00:04: [irq 13]
[ 0.517914] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.518249] pnp 00:05: [io 0x0378-0x037f]
[ 0.518254] pnp 00:05: [irq 7]
[ 0.518256] pnp 00:05: [dma 0 disabled]
[ 0.518383] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.518436] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.518439] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.518441] pnp 00:06: [io 0x0290-0x029f]
[ 0.518501] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.518503] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.518544] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.518571] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.518846] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.518850] pnp 00:08: [irq 4]
[ 0.518852] pnp 00:08: [dma 0 disabled]
[ 0.518936] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.519018] pnp 00:09: [io 0x0060]
[ 0.519020] pnp 00:09: [io 0x0064]
[ 0.519022] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.519024] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.519071] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.519074] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.519076] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.519233] pnp 00:0a: [io 0x0010-0x001f]
[ 0.519235] pnp 00:0a: [io 0x0022-0x003f]
[ 0.519236] pnp 00:0a: [io 0x0062-0x0063]
[ 0.519238] pnp 00:0a: [io 0x0065-0x006f]
[ 0.519240] pnp 00:0a: [io 0x0072-0x007f]
[ 0.519242] pnp 00:0a: [io 0x0080]
[ 0.519244] pnp 00:0a: [io 0x0084-0x0086]
[ 0.519245] pnp 00:0a: [io 0x0088]
[ 0.519247] pnp 00:0a: [io 0x008c-0x008e]
[ 0.519249] pnp 00:0a: [io 0x0090-0x009f]
[ 0.519251] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.519253] pnp 00:0a: [io 0x00b1]
[ 0.519254] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.519256] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.519258] pnp 00:0a: [io 0x040b]
[ 0.519260] pnp 00:0a: [io 0x04d6]
[ 0.519262] pnp 00:0a: [io 0x0c00-0x0c01]
[ 0.519263] pnp 00:0a: [io 0x0c14]
[ 0.519266] pnp 00:0a: [io 0x0c50-0x0c51]
[ 0.519268] pnp 00:0a: [io 0x0c52]
[ 0.519270] pnp 00:0a: [io 0x0c6c]
[ 0.519271] pnp 00:0a: [io 0x0c6f]
[ 0.519273] pnp 00:0a: [io 0x0cd0-0x0cd1]
[ 0.519275] pnp 00:0a: [io 0x0cd2-0x0cd3]
[ 0.519277] pnp 00:0a: [io 0x0cd4-0x0cd5]
[ 0.519278] pnp 00:0a: [io 0x0cd6-0x0cd7]
[ 0.519280] pnp 00:0a: [io 0x0cd8-0x0cdf]
[ 0.519282] pnp 00:0a: [io 0x0b00-0x0b3f]
[ 0.519284] pnp 00:0a: [io 0x0800-0x089f]
[ 0.519286] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.519288] pnp 00:0a: [io 0x0b00-0x0b1f]
[ 0.519290] pnp 00:0a: [io 0x0b20-0x0b3f]
[ 0.519292] pnp 00:0a: [io 0x0900-0x090f]
[ 0.519294] pnp 00:0a: [io 0x0910-0x091f]
[ 0.519296] pnp 00:0a: [io 0xfe00-0xfefe]
[ 0.519297] pnp 00:0a: [io 0x0060]
[ 0.519299] pnp 00:0a: [io 0x0064]
[ 0.519301] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.519303] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.519306] pnp 00:0a: [mem 0xfec10000-0xfec1001f]
[ 0.519308] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.519310] pnp 00:0a: [mem 0xfed80000-0xfed80fff]
[ 0.519312] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.519318] Switched to NOHz mode on CPU #3
[ 0.519326] Switched to NOHz mode on CPU #0
[ 0.519332] Switched to NOHz mode on CPU #1
[ 0.519336] Switched to NOHz mode on CPU #2
[ 0.519367] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.519370] system 00:0a: [io 0x040b] has been reserved
[ 0.519372] system 00:0a: [io 0x04d6] has been reserved
[ 0.519375] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.519377] system 00:0a: [io 0x0c14] has been reserved
[ 0.519380] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.519382] system 00:0a: [io 0x0c52] has been reserved
[ 0.519384] system 00:0a: [io 0x0c6c] has been reserved
[ 0.519387] system 00:0a: [io 0x0c6f] has been reserved
[ 0.519389] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.519392] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.519394] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.519397] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.519399] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.519402] system 00:0a: [io 0x0b00-0x0b3f] has been reserved
[ 0.519404] system 00:0a: [io 0x0800-0x089f] has been reserved
[ 0.519407] system 00:0a: [io 0x0b00-0x0b1f] has been reserved
[ 0.519409] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.519412] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.519415] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.519418] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.519421] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.519424] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.519426] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.519429] system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.519432] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.519467] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.519512] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.519515] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.519622] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.519625] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.519627] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.519629] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[ 0.519632] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.519678] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.519681] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.519683] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.519686] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.519689] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.519692] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.519785] pnp: PnP ACPI: found 13 devices
[ 0.519786] ACPI: ACPI bus type pnp unregistered
[ 0.525828] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.525831] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.525834] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.525837] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.525841] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.525843] pci 0000:00:04.0: bridge window [io disabled]
[ 0.525846] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.525848] pci 0000:00:04.0: bridge window [mem pref disabled]
[ 0.525852] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.525854] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.525857] pci 0000:00:0a.0: bridge window [mem disabled]
[ 0.525859] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.525863] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.525865] pci 0000:00:14.4: bridge window [io disabled]
[ 0.525869] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.525872] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.525892] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.525896] pci 0000:00:02.0: setting latency timer to 64
[ 0.525905] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.525907] pci 0000:00:04.0: setting latency timer to 64
[ 0.525912] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.525915] pci 0000:00:0a.0: setting latency timer to 64
[ 0.525921] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.525924] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.525926] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.525928] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.525931] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.525933] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.525935] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.525937] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.525940] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.525942] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.525945] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.525947] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.525950] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.525952] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.525954] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.525956] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.525959] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.525961] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.526071] NET: Registered protocol family 2
[ 0.526301] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.527817] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.530712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.531070] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.531073] TCP reno registered
[ 0.531091] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.531161] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.531426] NET: Registered protocol family 1
[ 1.388152] pci 0000:01:00.0: Boot video device
[ 1.388186] PCI: CLS 64 bytes, default 64
[ 1.388231] Unpacking initramfs...
[ 1.556505] Freeing initrd memory: 7816k freed
[ 1.560351] PCI-DMA: Disabling AGP.
[ 1.560463] PCI-DMA: aperture base @ c0000000 size 65536 KB
[ 1.560464] PCI-DMA: using GART IOMMU.
[ 1.560468] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.564211] audit: initializing netlink socket (disabled)
[ 1.564227] type=2000 audit(1322867441.560:1): initialized
[ 1.575355] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.576547] VFS: Disk quotas dquot_6.5.2
[ 1.576607] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.576682] msgmni has been set to 16007
[ 1.576938] alg: No test for stdrng (krng)
[ 1.576988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.576992] io scheduler noop registered
[ 1.576993] io scheduler deadline registered
[ 1.577017] io scheduler cfq registered (default)
[ 1.577215] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.577244] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.577377] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.577396] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 1.577495] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.577516] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.577644] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.577648] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.577651] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.577654] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.577668] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 1.577670] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.577673] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 1.577685] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.577687] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.577689] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.577775] ERST: Table is not found!
[ 1.577844] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.598213] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.704596] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.704909] Linux agpgart interface v0.103
[ 1.705003] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.707968] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.707978] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.708172] mousedev: PS/2 mouse device common for all mice
[ 1.708213] rtc_cmos 00:02: RTC can wake from S4
[ 1.708376] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.708400] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.708415] cpuidle: using governor ladder
[ 1.708417] cpuidle: using governor menu
[ 1.708689] TCP cubic registered
[ 1.708783] NET: Registered protocol family 10
[ 1.709433] Mobile IPv6
[ 1.709435] NET: Registered protocol family 17
[ 1.709439] Registering the dns_resolver key type
[ 1.709550] PM: Hibernation image not present or could not be loaded.
[ 1.709560] registered taskstats version 1
[ 1.710220] rtc_cmos 00:02: setting system clock to 2011-12-02 23:10:42 UTC (1322867442)
[ 1.710246] Initializing network drop monitor service
[ 1.711317] Freeing unused kernel memory: 596k freed
[ 1.711476] Write protecting the kernel read-only data: 6144k
[ 1.714794] Freeing unused kernel memory: 804k freed
[ 1.718430] Freeing unused kernel memory: 836k freed
[ 1.735454] udev[84]: starting version 164
[ 1.775392] SCSI subsystem initialized
[ 1.790286] libata version 3.00 loaded.
[ 1.796615] ahci 0000:00:11.0: version 3.0
[ 1.796645] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.796768] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.796771] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.797672] scsi0 : ahci
[ 1.797895] scsi1 : ahci
[ 1.798070] scsi2 : ahci
[ 1.798253] scsi3 : ahci
[ 1.798433] scsi4 : ahci
[ 1.798615] scsi5 : ahci
[ 1.798703] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 19
[ 1.798707] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 19
[ 1.798710] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 19
[ 1.798713] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 19
[ 1.798716] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff00 irq 19
[ 1.798719] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff80 irq 19
[ 2.120108] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.120145] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.124132] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.288096] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.288470] ata1.00: ATA-9: M4-CT128M4SSD2, 0002, max UDMA/100
[ 2.288474] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.288883] ata1.00: configured for UDMA/100
[ 2.289085] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0002 PQ: 0 ANSI: 5
[ 2.296093] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.296115] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.296419] ata4.00: ATAPI: ATAPI iHAS124 B, AL0R, max UDMA/100
[ 2.296856] ata2.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
[ 2.296860] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.297171] ata4.00: configured for UDMA/100
[ 2.297716] ata2.00: configured for UDMA/133
[ 2.297831] scsi 1:0:0:0: Direct-Access ATA ST1000DL002-9TT1 CC32 PQ: 0 ANSI: 5
[ 2.299170] scsi 3:0:0:0: CD-ROM ATAPI iHAS124 B AL0R PQ: 0 ANSI: 5
[ 2.307346] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.307389] sd 0:0:0:0: [sda] Write Protect is off
[ 2.307394] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.307409] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.307432] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.307465] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.307468] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.307481] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.307591] sda: detected capacity change from 0 to 128035676160
[ 2.307628] sdb: detected capacity change from 0 to 1000204886016
[ 2.307852] sda: sda1 sda2
[ 2.308122] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.362199] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[ 2.362808] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.560107] Refined TSC clocksource calibration: 2399.957 MHz.
[ 2.560114] Switching to clocksource tsc
[ 2.817307] device-mapper: uevent: version 1.0.3
[ 2.817381] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.998537] PM: Starting manual resume from disk
[ 2.998540] PM: Hibernation image partition 254:1 present
[ 2.998542] PM: Looking for hibernation image.
[ 3.015077] PM: Image not found (code -22)
[ 3.015080] PM: Hibernation image not present or could not be loaded.
[ 3.040172] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.215244] udev[355]: starting version 164
[ 3.263635] ACPI: acpi_idle registered with cpuidle
[ 3.265065] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.265073] ACPI: Power Button [PWRB]
[ 3.267302] ACPI: processor limited to max C-state 1
[ 3.272120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.272128] ACPI: Power Button [PWRF]
[ 3.286024] wmi: Mapper loaded
[ 3.292893] MCE: In-kernel MCE decoding enabled.
[ 3.304595] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.308734] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.308763] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.308820] r8169 0000:03:00.0: setting latency timer to 64
[ 3.308827] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
[ 3.308884] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 3.308991] r8169 0000:03:00.0: eth0: Features changed: 0x00004980 -> 0x00004180
[ 3.309447] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc900117e6000, f4:6d:04:d3:08:de, XID 0c900800 IRQ 43
[ 3.318168] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.323043] sr0: scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.323048] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.323208] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.358769] usbcore: registered new interface driver usbfs
[ 3.358804] usbcore: registered new interface driver hub
[ 3.360749] usbcore: registered new device driver usb
[ 3.362940] EDAC MC: Ver: 2.1.0 Dec 2 2011
[ 3.370887] AMD64 EDAC driver v3.4.0
[ 3.371089] EDAC amd64: DRAM ECC enabled.
[ 3.371097] EDAC amd64: F10h detected (node 0).
[ 3.371112] EDAC MC: DCT0 chip selects:
[ 3.371114] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 3.371116] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 3.371118] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 3.371119] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 3.371121] EDAC MC: DCT1 chip selects:
[ 3.371123] EDAC amd64: MC: 0: 2048MB 1: 2048MB
[ 3.371125] EDAC amd64: MC: 2: 2048MB 3: 2048MB
[ 3.371127] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 3.371128] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 3.371130] EDAC amd64: using x4 syndromes.
[ 3.371131] EDAC amd64: MCT channel count: 1
[ 3.371151] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
[ 3.371202] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 3.377972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.380263] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.380310] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 3.380353] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.382544] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.382591] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.382648] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.408089] parport_pc 00:05: reported by Plug and Play ACPI
[ 3.408142] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 3.408288] [drm] Initialized drm 1.1.0 20060810
[ 3.412080] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.412117] QUIRK: Enable AMD PLL fix
[ 3.412128] ehci_hcd 0000:00:12.2: debug port 1
[ 3.412154] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff800
[ 3.419407] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.424046] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.424079] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.424082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.424084] usb usb1: Product: EHCI Host Controller
[ 3.424086] usb usb1: Manufacturer: Linux 2.6.39 ehci_hcd
[ 3.424088] usb usb1: SerialNumber: 0000:00:12.2
[ 3.424231] hub 1-0:1.0: USB hub found
[ 3.424235] hub 1-0:1.0: 5 ports detected
[ 3.424375] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.424425] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.424438] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.430856] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.430891] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 3.430894] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.430918] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 3.448719] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.452102] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.452133] ehci_hcd 0000:00:13.2: debug port 1
[ 3.452150] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe9ff400
[ 3.461781] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfebf0000
[ 3.461865] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 3.461871] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 3.461876] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 3.461881] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 3.461887] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 3.461972] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.461975] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.461977] usb usb3: Product: xHCI Host Controller
[ 3.461979] usb usb3: Manufacturer: Linux 2.6.39 xhci_hcd
[ 3.461980] usb usb3: SerialNumber: 0000:02:00.0
[ 3.462096] xHCI xhci_add_endpoint called for root hub
[ 3.462098] xHCI xhci_check_bandwidth called for root hub
[ 3.462126] hub 3-0:1.0: USB hub found
[ 3.462133] hub 3-0:1.0: 2 ports detected
[ 3.462192] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.462198] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 3.464133] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.464160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.464163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.464165] usb usb2: Product: EHCI Host Controller
[ 3.464167] usb usb2: Manufacturer: Linux 2.6.39 ehci_hcd
[ 3.464169] usb usb2: SerialNumber: 0000:00:13.2
[ 3.464302] hub 2-0:1.0: USB hub found
[ 3.464306] hub 2-0:1.0: 5 ports detected
[ 3.464471] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.464501] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 3.464520] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 3.476111] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.476115] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.476117] usb usb4: Product: xHCI Host Controller
[ 3.476119] usb usb4: Manufacturer: Linux 2.6.39 xhci_hcd
[ 3.476120] usb usb4: SerialNumber: 0000:02:00.0
[ 3.476252] xHCI xhci_add_endpoint called for root hub
[ 3.476254] xHCI xhci_check_bandwidth called for root hub
[ 3.476281] hub 4-0:1.0: USB hub found
[ 3.476287] hub 4-0:1.0: 2 ports detected
[ 3.480084] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.480113] ehci_hcd 0000:00:16.2: debug port 1
[ 3.480130] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe9ff000
[ 3.492135] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 3.492163] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.492166] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.492168] usb usb5: Product: EHCI Host Controller
[ 3.492170] usb usb5: Manufacturer: Linux 2.6.39 ehci_hcd
[ 3.492172] usb usb5: SerialNumber: 0000:00:16.2
[ 3.492316] hub 5-0:1.0: USB hub found
[ 3.492320] hub 5-0:1.0: 4 ports detected
[ 3.492631] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.521067] [drm] radeon kernel modesetting enabled.
[ 3.521284] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.521290] radeon 0000:01:00.0: setting latency timer to 64
[ 3.521502] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BA).
[ 3.521539] [drm] register mmio base: 0xFEAE0000
[ 3.521540] [drm] register mmio size: 131072
[ 3.526045] ATOM BIOS: GV
[ 3.526072] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.526074] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 3.526311] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.526315] [drm] RAM width 128bits DDR
[ 3.526396] [TTM] Zone kernel: Available graphics memory: 4099078 kiB.
[ 3.526398] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 3.526400] [TTM] Initializing pool allocator.
[ 3.526428] [drm] radeon: 1024M of VRAM memory ready
[ 3.526432] [drm] radeon: 512M of GTT memory ready.
[ 3.526449] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.526451] [drm] Driver supports precise vblank timestamp query.
[ 3.526487] radeon 0000:01:00.0: irq 49 for MSI/MSI-X
[ 3.526492] radeon 0000:01:00.0: radeon: using MSI.
[ 3.526521] [drm] radeon: irq initialized.
[ 3.526525] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.527571] [drm] Loading JUNIPER Microcode
[ 3.539338] hda_codec: ALC887-VD: BIOS auto-probing.
[ 3.543952] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 3.546160] radeon 0000:01:00.0: WB enabled
[ 3.562253] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.562295] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.562312] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 3.562328] [drm] ring test succeeded in 1 usecs
[ 3.562437] [drm] radeon: ib pool ready.
[ 3.562494] [drm] ib test succeeded in 0 usecs
[ 3.562500] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 3.562906] [drm] Radeon Display Connectors
[ 3.562908] [drm] Connector 0:
[ 3.562909] [drm] DisplayPort
[ 3.562910] [drm] HPD4
[ 3.562913] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 3.562914] [drm] Encoders:
[ 3.562916] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.562917] [drm] Connector 1:
[ 3.562919] [drm] HDMI-A
[ 3.562920] [drm] HPD5
[ 3.562922] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 3.562923] [drm] Encoders:
[ 3.562924] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.562926] [drm] Connector 2:
[ 3.562927] [drm] DVI-I
[ 3.562928] [drm] HPD1
[ 3.562930] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 3.562932] [drm] Encoders:
[ 3.562933] [drm] DFP3: INTERNAL_UNIPHY1
[ 3.562934] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 3.562936] [drm] Connector 3:
[ 3.562937] [drm] DVI-I
[ 3.562938] [drm] HPD6
[ 3.562940] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 3.562942] [drm] Encoders:
[ 3.562943] [drm] DFP4: INTERNAL_UNIPHY
[ 3.562944] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.572057] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe9fe000
[ 3.632032] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.632035] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.632037] usb usb6: Product: OHCI Host Controller
[ 3.632039] usb usb6: Manufacturer: Linux 2.6.39 ohci_hcd
[ 3.632041] usb usb6: SerialNumber: 0000:00:12.0
[ 3.632165] hub 6-0:1.0: USB hub found
[ 3.632170] hub 6-0:1.0: 5 ports detected
[ 3.644031] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.644059] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.644070] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 3.672032] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fd000
[ 3.732045] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.732047] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.732049] usb usb7: Product: OHCI Host Controller
[ 3.732051] usb usb7: Manufacturer: Linux 2.6.39 ohci_hcd
[ 3.732053] usb usb7: SerialNumber: 0000:00:13.0
[ 3.732143] hub 7-0:1.0: USB hub found
[ 3.732148] hub 7-0:1.0: 5 ports detected
[ 3.740060] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 3.744026] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.744039] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 3.744047] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 3.780063] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fc000
[ 3.839994] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.840010] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.840012] usb usb8: Product: OHCI Host Controller
[ 3.840014] usb usb8: Manufacturer: Linux 2.6.39 ohci_hcd
[ 3.840016] usb usb8: SerialNumber: 0000:00:14.5
[ 3.840108] hub 8-0:1.0: USB hub found
[ 3.840113] hub 8-0:1.0: 2 ports detected
[ 3.852040] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.852054] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 3.852062] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 3.874007] usb 1-1: New USB device found, idVendor=04a9, idProduct=1909
[ 3.874011] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.874014] usb 1-1: Product: CanoScan
[ 3.874015] usb 1-1: Manufacturer: Canon
[ 3.876066] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe9f3000
[ 3.935994] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.936009] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.936011] usb usb9: Product: OHCI Host Controller
[ 3.936013] usb usb9: Manufacturer: Linux 2.6.39 ohci_hcd
[ 3.936015] usb usb9: SerialNumber: 0000:00:16.0
[ 3.936114] hub 9-0:1.0: USB hub found
[ 3.936119] hub 9-0:1.0: 4 ports detected
[ 4.116493] [drm] Internal thermal controller with fan control
[ 4.116544] [drm] radeon: power management initialized
[ 4.205626] [drm] fb mappable at 0xD0141000
[ 4.205629] [drm] vram apper at 0xD0000000
[ 4.205630] [drm] size 8294400
[ 4.205631] [drm] fb depth is 24
[ 4.205633] [drm] pitch is 7680
[ 4.205718] fbcon: radeondrmfb (fb0) is primary device
[ 4.360070] usb 6-2: new full speed USB device number 2 using ohci_hcd
[ 4.419480] Console: switching to colour frame buffer device 240x67
[ 4.426692] fb0: radeondrmfb frame buffer device
[ 4.426694] drm: registered panic notifier
[ 4.426704] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
[ 4.426884] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.426967] HDA Intel 0000:01:00.1: irq 50 for MSI/MSI-X
[ 4.426989] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 4.535077] usb 6-2: New USB device found, idVendor=0764, idProduct=0501
[ 4.535081] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.535083] usb 6-2: Product: CRDA103.981
[ 4.535085] usb 6-2: Manufacturer: CP850PFCLCD
[ 4.535087] usb 6-2: SerialNumber: CPS
[ 4.589223] generic-usb 0003:0764:0501.0001: hiddev0,hidraw0: USB HID v1.10 Device [CP850PFCLCD CRDA103.981] on usb-0000:00:12.0-2/input0
[ 4.589243] usbcore: registered new interface driver usbhid
[ 4.589245] usbhid: USB HID core driver
[ 4.812070] usb 6-5: new low speed USB device number 3 using ohci_hcd
[ 4.918930] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 4.942572] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 4.962572] loop: module loaded
[ 4.974596] powernow-k8: Found 1 AMD Athlon(tm) II X4 610e Processor (4 cpu cores) (version 2.20.00)
[ 4.974654] powernow-k8: 0 : pstate 0 (2400 MHz)
[ 4.974656] powernow-k8: 1 : pstate 1 (1900 MHz)
[ 4.974658] powernow-k8: 2 : pstate 2 (1700 MHz)
[ 4.974660] powernow-k8: 3 : pstate 3 (800 MHz)
[ 4.989057] usb 6-5: New USB device found, idVendor=045e, idProduct=0780
[ 4.989068] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.989075] usb 6-5: Product: Comfort Curve Keyboard 3000
[ 4.989081] usb 6-5: Manufacturer: Microsoft
[ 5.008393] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input4
[ 5.008648] generic-usb 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:12.0-5/input0
[ 5.019424] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/input/input5
[ 5.019646] generic-usb 0003:045E:0780.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:12.0-5/input1
[ 5.284121] usb 7-1: new low speed USB device number 2 using ohci_hcd
[ 5.315404] Adding 16777212k swap on /dev/mapper/vg--linux-swap. Priority:-1 extents:1 across:16777212k
[ 5.407890] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.422529] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.461086] usb 7-1: New USB device found, idVendor=045e, idProduct=077b
[ 5.461097] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.461105] usb 7-1: Product: Comfort Mouse 3000
[ 5.461110] usb 7-1: Manufacturer: Microsoft
[ 5.476535] input: Microsoft Comfort Mouse 3000 as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input6
[ 5.476831] generic-usb 0003:045E:077B.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Comfort Mouse 3000] on usb-0000:00:13.0-1/input0
[ 6.053394] lp0: using parport0 (interrupt-driven).
[ 6.057573] ppdev: user-space parallel port driver
[ 6.392491] sshd (1175): /proc/1175/oom_adj is deprecated, please use /proc/1175/oom_score_adj instead.
[ 6.444685] r8169 0000:03:00.0: eth0: link down
[ 6.444701] r8169 0000:03:00.0: eth0: link down
[ 6.447308] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.681928] r8169 0000:03:00.0: eth0: link up
[ 8.684506] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.120079] eth0: no IPv6 routers present
Reply to: