Bug#650771: Info received (r8169 connectivity intermittent, link up messages in syslog)
So far (first boot), no problems with the patch from http://article.gmane.org/gmane.linux.kernel/1222924
I've tried to stress the system by doing flood pings and downloading multiple large files at the same time. Everything has held up so far.
$ uptime
21:41:12 up 25 min, 6 users, load average: 0.00, 0.01, 0.05
$ ifconfig eth0
eth0 Link encap:Ethernet HWaddr f4:6d:04:d3:08:de
inet addr:192.168.11.46 Bcast:192.168.11.255 Mask:255.255.255.0
inet6 addr: fe80::f66d:4ff:fed3:8de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:674317 errors:0 dropped:0 overruns:0 frame:0
TX packets:344137 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1010008762 (963.2 MiB) TX bytes:23711528 (22.6 MiB)
Interrupt:43 Base address:0xe000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39 (inglorion@mithrandir) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Dec 2 21:09:09 PST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.39 root=/dev/mapper/vg--alpha-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M5A87, BIOS 0404 04/19/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ cff8d000-cff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ 22fffe000-230000000
[ 0.000000] RAMDISK: 3784e000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb850 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 00054 (v01 041911 XSDT1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 041911 FACP1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff90460 0CCC6 (v01 A1866 A1866001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cffa8000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0008C (v01 041911 APIC1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90420 0003C (v01 041911 OEMMCFG 20110419 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 041911 OEMB1732 20110419 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff9f8b0 00038 (v01 041911 OEMHPET 20110419 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9f8f0 00898 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fff9000 - 000000022fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096922
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2fa00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83840 r8192 d22656 u262144
[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065557
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39 root=/dev/mapper/vg--alpha-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c0000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c4000000
[ 0.000000] Memory: 8122152k/9175040k available (3273k kernel code, 787352k absent, 265536k reserved, 3416k data, 596k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2399.977 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.95 BogoMIPS (lpj=9599908)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004085] Security Framework initialized
[ 0.004089] SELinux: Disabled at boot.
[ 0.004733] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008123] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009435] Mount-cache hash table entries: 256
[ 0.009561] Initializing cgroup subsys ns
[ 0.009564] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009567] Initializing cgroup subsys cpuacct
[ 0.009571] Initializing cgroup subsys memory
[ 0.009581] Initializing cgroup subsys devices
[ 0.009584] Initializing cgroup subsys freezer
[ 0.009586] Initializing cgroup subsys net_cls
[ 0.009589] Initializing cgroup subsys blkio
[ 0.009626] tseg: 0000000000
[ 0.009637] CPU: Physical Processor ID: 0
[ 0.009638] CPU: Processor Core ID: 0
[ 0.009640] mce: CPU supports 6 MCE banks
[ 0.009648] using C1E aware idle routine
[ 0.010346] ACPI: Core revision 20110316
[ 0.016058] Setting APIC routing to flat
[ 0.016313] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056251] CPU0: AMD Athlon(tm) II X4 610e Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 95000
[ 0.148026] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148028] System has AMD C1E enabled
[ 0.148043] Switch to broadcast mode on CPU1
[ 0.148119] #2
[ 0.148121] smpboot cpu 2: start_ip = 95000
[ 0.240032] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240051] Switch to broadcast mode on CPU2
[ 0.240125] #3
[ 0.240126] smpboot cpu 3: start_ip = 95000
[ 0.332046] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332064] Switch to broadcast mode on CPU3
[ 0.332069] Brought up 4 CPUs
[ 0.332072] Total of 4 processors activated (19199.80 BogoMIPS).
[ 0.332545] Switch to broadcast mode on CPU0
[ 0.332545] devtmpfs: initialized
[ 0.335004] PM: Registering ACPI NVS region at cffa8000 (163840 bytes)
[ 0.335004] print_constraints: dummy:
[ 0.335004] NET: Registered protocol family 16
[ 0.335004] node 0 link 0: io port [1000, ffffff]
[ 0.335004] TOM: 00000000d0000000 aka 3328M
[ 0.335004] Fam 10h mmconf [e0000000, efffffff]
[ 0.335004] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.335004] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.335004] node 0 link 0: mmio [a0000, bffff]
[ 0.335004] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.335004] TOM2: 0000000230000000 aka 8960M
[ 0.335004] bus: [00, 1f] on node 0 link 0
[ 0.335004] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.335004] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.335004] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.335004] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
[ 0.335004] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.335004] Extended Config Space enabled on 1 nodes
[ 0.335004] ACPI: bus type pci registered
[ 0.336069] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.336072] PCI: not using MMCONFIG
[ 0.336074] PCI: Using configuration type 1 for base access
[ 0.336075] PCI: Using configuration type 1 for extended access
[ 0.336520] bio: create slab <bio-0> at 0
[ 0.336879] ACPI: EC: Look up EC in DSDT
[ 0.337988] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.444434] ACPI: Interpreter enabled
[ 0.444438] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.444463] ACPI: Using IOAPIC for interrupt routing
[ 0.444488] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.445343] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.478068] ACPI: No dock devices found.
[ 0.478070] HEST: Table not found.
[ 0.478074] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.478285] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.478475] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.478478] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.478480] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.478483] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.478485] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.478488] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.478501] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.478539] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.478562] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.478565] pci 0000:00:02.0: PME# disabled
[ 0.478579] pci 0000:00:04.0: [1002:597a] type 1 class 0x000604
[ 0.478601] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.478603] pci 0000:00:04.0: PME# disabled
[ 0.478620] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.478641] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.478644] pci 0000:00:0a.0: PME# disabled
[ 0.478666] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.478680] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.478688] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.478696] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.478703] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.478711] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.478719] pci 0000:00:11.0: reg 24: [mem 0xfe9ffc00-0xfe9fffff]
[ 0.478755] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.478765] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.478818] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.478833] pci 0000:00:12.2: reg 10: [mem 0xfe9ff800-0xfe9ff8ff]
[ 0.478884] pci 0000:00:12.2: supports D1 D2
[ 0.478886] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.478889] pci 0000:00:12.2: PME# disabled
[ 0.478909] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.478919] pci 0000:00:13.0: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.478972] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.478987] pci 0000:00:13.2: reg 10: [mem 0xfe9ff400-0xfe9ff4ff]
[ 0.479038] pci 0000:00:13.2: supports D1 D2
[ 0.479040] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.479043] pci 0000:00:13.2: PME# disabled
[ 0.479060] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.479118] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.479134] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.479177] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.479180] pci 0000:00:14.2: PME# disabled
[ 0.479192] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.479249] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.479281] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.479291] pci 0000:00:14.5: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.479342] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.479352] pci 0000:00:16.0: reg 10: [mem 0xfe9f3000-0xfe9f3fff]
[ 0.479405] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.479420] pci 0000:00:16.2: reg 10: [mem 0xfe9ff000-0xfe9ff0ff]
[ 0.479471] pci 0000:00:16.2: supports D1 D2
[ 0.479473] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.479476] pci 0000:00:16.2: PME# disabled
[ 0.479492] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.479507] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.479520] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.479533] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.479549] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.479592] pci 0000:01:00.0: [1002:68ba] type 0 class 0x000300
[ 0.479604] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.479614] pci 0000:01:00.0: reg 18: [mem 0xfeae0000-0xfeafffff 64bit]
[ 0.479621] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.479632] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.479648] pci 0000:01:00.0: supports D1 D2
[ 0.479667] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.479679] pci 0000:01:00.1: reg 10: [mem 0xfeabc000-0xfeabffff 64bit]
[ 0.479718] pci 0000:01:00.1: supports D1 D2
[ 0.484060] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.484066] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.484069] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.484073] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.484120] pci 0000:02:00.0: [1b21:1042] type 0 class 0x000c03
[ 0.484138] pci 0000:02:00.0: reg 10: [mem 0xfebf0000-0xfebf7fff 64bit]
[ 0.484209] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.484214] pci 0000:02:00.0: PME# disabled
[ 0.492062] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.492067] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.492070] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.492074] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.492116] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.492129] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.492149] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.492162] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.492199] pci 0000:03:00.0: supports D1 D2
[ 0.492201] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.492205] pci 0000:03:00.0: PME# disabled
[ 0.500065] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.500071] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.500074] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.500078] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.500131] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.500135] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.500138] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.500142] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.500145] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.500148] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.500150] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.500153] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.500155] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.500158] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.500173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.500443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.500481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.500522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.500563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.500767] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.500939] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.506017] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.506079] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.506141] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.506202] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *9 10 11 14 15)
[ 0.506250] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.506288] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.506325] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.506363] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.506461] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.506465] vgaarb: loaded
[ 0.506498] PCI: Using ACPI for IRQ routing
[ 0.506501] PCI: pci_cache_line_size set to 64 bytes
[ 0.506569] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.506572] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.506669] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.506673] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.508067] Switching to clocksource hpet
[ 0.509484] pnp: PnP ACPI init
[ 0.509503] ACPI: bus type pnp registered
[ 0.509641] pnp 00:00: [bus 00-ff]
[ 0.509643] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.509645] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.509647] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.509650] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.509652] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.509654] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.509656] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.509709] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.509754] pnp 00:01: [dma 4]
[ 0.509756] pnp 00:01: [io 0x0000-0x000f]
[ 0.509758] pnp 00:01: [io 0x0081-0x0083]
[ 0.509760] pnp 00:01: [io 0x0087]
[ 0.509762] pnp 00:01: [io 0x0089-0x008b]
[ 0.509763] pnp 00:01: [io 0x008f]
[ 0.509765] pnp 00:01: [io 0x00c0-0x00df]
[ 0.509790] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.509801] pnp 00:02: [io 0x0070-0x0071]
[ 0.509810] pnp 00:02: [irq 8]
[ 0.509836] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.509844] pnp 00:03: [io 0x0061]
[ 0.509868] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.509876] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.509880] pnp 00:04: [irq 13]
[ 0.509905] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.510240] pnp 00:05: [io 0x0378-0x037f]
[ 0.510244] pnp 00:05: [irq 7]
[ 0.510246] pnp 00:05: [dma 0 disabled]
[ 0.510372] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.510425] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.510428] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.510430] pnp 00:06: [io 0x0290-0x029f]
[ 0.510489] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.510492] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.510533] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.510560] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.510835] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.510839] pnp 00:08: [irq 4]
[ 0.510841] pnp 00:08: [dma 0 disabled]
[ 0.510925] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.511007] pnp 00:09: [io 0x0060]
[ 0.511009] pnp 00:09: [io 0x0064]
[ 0.511011] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.511013] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.511060] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.511063] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.511065] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.511222] pnp 00:0a: [io 0x0010-0x001f]
[ 0.511224] pnp 00:0a: [io 0x0022-0x003f]
[ 0.511226] pnp 00:0a: [io 0x0062-0x0063]
[ 0.511227] pnp 00:0a: [io 0x0065-0x006f]
[ 0.511229] pnp 00:0a: [io 0x0072-0x007f]
[ 0.511231] pnp 00:0a: [io 0x0080]
[ 0.511233] pnp 00:0a: [io 0x0084-0x0086]
[ 0.511235] pnp 00:0a: [io 0x0088]
[ 0.511237] pnp 00:0a: [io 0x008c-0x008e]
[ 0.511238] pnp 00:0a: [io 0x0090-0x009f]
[ 0.511240] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.511242] pnp 00:0a: [io 0x00b1]
[ 0.511244] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.511246] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.511247] pnp 00:0a: [io 0x040b]
[ 0.511249] pnp 00:0a: [io 0x04d6]
[ 0.511251] pnp 00:0a: [io 0x0c00-0x0c01]
[ 0.511252] pnp 00:0a: [io 0x0c14]
[ 0.511255] pnp 00:0a: [io 0x0c50-0x0c51]
[ 0.511257] pnp 00:0a: [io 0x0c52]
[ 0.511259] pnp 00:0a: [io 0x0c6c]
[ 0.511261] pnp 00:0a: [io 0x0c6f]
[ 0.511262] pnp 00:0a: [io 0x0cd0-0x0cd1]
[ 0.511264] pnp 00:0a: [io 0x0cd2-0x0cd3]
[ 0.511266] pnp 00:0a: [io 0x0cd4-0x0cd5]
[ 0.511268] pnp 00:0a: [io 0x0cd6-0x0cd7]
[ 0.511270] pnp 00:0a: [io 0x0cd8-0x0cdf]
[ 0.511271] pnp 00:0a: [io 0x0b00-0x0b3f]
[ 0.511273] pnp 00:0a: [io 0x0800-0x089f]
[ 0.511275] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.511277] pnp 00:0a: [io 0x0b00-0x0b1f]
[ 0.511279] pnp 00:0a: [io 0x0b20-0x0b3f]
[ 0.511281] pnp 00:0a: [io 0x0900-0x090f]
[ 0.511283] pnp 00:0a: [io 0x0910-0x091f]
[ 0.511285] pnp 00:0a: [io 0xfe00-0xfefe]
[ 0.511287] pnp 00:0a: [io 0x0060]
[ 0.511288] pnp 00:0a: [io 0x0064]
[ 0.511290] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.511293] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.511295] pnp 00:0a: [mem 0xfec10000-0xfec1001f]
[ 0.511297] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.511299] pnp 00:0a: [mem 0xfed80000-0xfed80fff]
[ 0.511301] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.511320] Switched to NOHz mode on CPU #3
[ 0.511329] Switched to NOHz mode on CPU #0
[ 0.511334] Switched to NOHz mode on CPU #1
[ 0.511339] Switched to NOHz mode on CPU #2
[ 0.511368] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.511371] system 00:0a: [io 0x040b] has been reserved
[ 0.511373] system 00:0a: [io 0x04d6] has been reserved
[ 0.511376] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.511378] system 00:0a: [io 0x0c14] has been reserved
[ 0.511380] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.511383] system 00:0a: [io 0x0c52] has been reserved
[ 0.511385] system 00:0a: [io 0x0c6c] has been reserved
[ 0.511388] system 00:0a: [io 0x0c6f] has been reserved
[ 0.511390] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.511392] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.511395] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.511397] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.511400] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.511402] system 00:0a: [io 0x0b00-0x0b3f] has been reserved
[ 0.511405] system 00:0a: [io 0x0800-0x089f] has been reserved
[ 0.511408] system 00:0a: [io 0x0b00-0x0b1f] has been reserved
[ 0.511410] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.511413] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.511416] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.511418] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.511422] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.511424] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.511427] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.511430] system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.511433] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.511468] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.511514] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.511516] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.511625] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.511627] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.511629] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.511631] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[ 0.511634] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.511681] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.511683] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.511686] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.511689] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.511692] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.511694] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.511789] pnp: PnP ACPI: found 13 devices
[ 0.511791] ACPI: ACPI bus type pnp unregistered
[ 0.517814] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.517817] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.517820] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.517823] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.517827] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.517829] pci 0000:00:04.0: bridge window [io disabled]
[ 0.517832] pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.517834] pci 0000:00:04.0: bridge window [mem pref disabled]
[ 0.517838] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.517840] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.517843] pci 0000:00:0a.0: bridge window [mem disabled]
[ 0.517846] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.517849] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.517851] pci 0000:00:14.4: bridge window [io disabled]
[ 0.517855] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.517858] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.517878] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.517882] pci 0000:00:02.0: setting latency timer to 64
[ 0.517891] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.517893] pci 0000:00:04.0: setting latency timer to 64
[ 0.517898] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.517901] pci 0000:00:0a.0: setting latency timer to 64
[ 0.517907] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.517910] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.517912] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.517914] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.517916] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.517919] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.517921] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.517923] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.517926] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.517928] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.517931] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.517933] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.517936] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.517938] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.517940] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.517942] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.517945] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.517947] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.518057] NET: Registered protocol family 2
[ 0.518288] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.519802] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.522668] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.523023] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.523025] TCP reno registered
[ 0.523044] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.523113] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.523378] NET: Registered protocol family 1
[ 1.400150] pci 0000:01:00.0: Boot video device
[ 1.400184] PCI: CLS 64 bytes, default 64
[ 1.400229] Unpacking initramfs...
[ 1.568575] Freeing initrd memory: 7816k freed
[ 1.572432] PCI-DMA: Disabling AGP.
[ 1.572540] PCI-DMA: aperture base @ c0000000 size 65536 KB
[ 1.572541] PCI-DMA: using GART IOMMU.
[ 1.572544] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.576297] audit: initializing netlink socket (disabled)
[ 1.576314] type=2000 audit(1322860519.572:1): initialized
[ 1.587443] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.588569] VFS: Disk quotas dquot_6.5.2
[ 1.588624] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.588699] msgmni has been set to 16007
[ 1.588991] alg: No test for stdrng (krng)
[ 1.589047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.589051] io scheduler noop registered
[ 1.589053] io scheduler deadline registered
[ 1.589077] io scheduler cfq registered (default)
[ 1.589286] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.589315] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.589453] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.589472] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 1.589576] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.589596] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.589723] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.589727] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.589729] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.589732] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.589745] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 1.589747] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.589749] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 1.589763] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.589765] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.589767] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.589855] ERST: Table is not found!
[ 1.589922] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.610283] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.736592] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.736873] Linux agpgart interface v0.103
[ 1.736965] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.739932] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.739942] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.740139] mousedev: PS/2 mouse device common for all mice
[ 1.740181] rtc_cmos 00:02: RTC can wake from S4
[ 1.740347] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.740369] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.740384] cpuidle: using governor ladder
[ 1.740386] cpuidle: using governor menu
[ 1.740656] TCP cubic registered
[ 1.740752] NET: Registered protocol family 10
[ 1.741403] Mobile IPv6
[ 1.741405] NET: Registered protocol family 17
[ 1.741409] Registering the dns_resolver key type
[ 1.741519] PM: Hibernation image not present or could not be loaded.
[ 1.741528] registered taskstats version 1
[ 1.742191] rtc_cmos 00:02: setting system clock to 2011-12-02 21:15:20 UTC (1322860520)
[ 1.742218] Initializing network drop monitor service
[ 1.743285] Freeing unused kernel memory: 596k freed
[ 1.743447] Write protecting the kernel read-only data: 6144k
[ 1.746765] Freeing unused kernel memory: 804k freed
[ 1.750402] Freeing unused kernel memory: 836k freed
[ 1.767412] udev[84]: starting version 164
[ 1.806713] SCSI subsystem initialized
[ 1.822136] libata version 3.00 loaded.
[ 1.828454] ahci 0000:00:11.0: version 3.0
[ 1.828479] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.828610] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.828614] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.829503] scsi0 : ahci
[ 1.829736] scsi1 : ahci
[ 1.829913] scsi2 : ahci
[ 1.830096] scsi3 : ahci
[ 1.830273] scsi4 : ahci
[ 1.830454] scsi5 : ahci
[ 1.830539] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 19
[ 1.830542] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 19
[ 1.830545] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 19
[ 1.830549] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 19
[ 1.830552] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff00 irq 19
[ 1.830554] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff80 irq 19
[ 2.148110] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.152108] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.152138] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.320158] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.320533] ata1.00: ATA-9: M4-CT128M4SSD2, 0002, max UDMA/100
[ 2.320537] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.320942] ata1.00: configured for UDMA/100
[ 2.321139] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0002 PQ: 0 ANSI: 5
[ 2.324120] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.324670] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.324838] ata2.00: ATA-8: ST1000DL002-9TT153, CC32, max UDMA/133
[ 2.324842] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.325688] ata2.00: configured for UDMA/133
[ 2.325802] scsi 1:0:0:0: Direct-Access ATA ST1000DL002-9TT1 CC32 PQ: 0 ANSI: 5
[ 2.327235] ata4.00: ATAPI: ATAPI iHAS124 B, AL0R, max UDMA/100
[ 2.328094] ata4.00: configured for UDMA/100
[ 2.330111] scsi 3:0:0:0: CD-ROM ATAPI iHAS124 B AL0R PQ: 0 ANSI: 5
[ 2.337517] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.337526] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.337567] sd 0:0:0:0: [sda] Write Protect is off
[ 2.337571] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.337584] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.337620] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.337625] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.337688] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.337769] sda: detected capacity change from 0 to 128035676160
[ 2.337928] sdb: detected capacity change from 0 to 1000204886016
[ 2.338027] sda: sda1 sda2
[ 2.338292] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.396567] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[ 2.397182] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.572109] Refined TSC clocksource calibration: 2399.956 MHz.
[ 2.572116] Switching to clocksource tsc
[ 2.753064] device-mapper: uevent: version 1.0.3
[ 2.753137] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.941730] PM: Starting manual resume from disk
[ 2.941735] PM: Hibernation image partition 254:1 present
[ 2.941737] PM: Looking for hibernation image.
[ 2.958549] PM: Image not found (code -22)
[ 2.958552] PM: Hibernation image not present or could not be loaded.
[ 2.983544] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.159945] udev[360]: starting version 164
[ 3.208715] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.208722] ACPI: Power Button [PWRB]
[ 3.208783] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.208786] ACPI: Power Button [PWRF]
[ 3.237613] ACPI: acpi_idle registered with cpuidle
[ 3.244537] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.247464] ACPI: processor limited to max C-state 1
[ 3.253412] wmi: Mapper loaded
[ 3.259218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.259261] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.259337] r8169 0000:03:00.0: setting latency timer to 64
[ 3.259345] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
[ 3.259405] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 3.259526] r8169 0000:03:00.0: eth0: Features changed: 0x00004980 -> 0x00004180
[ 3.260062] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc900117ae000, f4:6d:04:d3:08:de, XID 0c900800 IRQ 43
[ 3.270327] MCE: In-kernel MCE decoding enabled.
[ 3.276514] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.301381] usbcore: registered new interface driver usbfs
[ 3.301410] usbcore: registered new interface driver hub
[ 3.301488] usbcore: registered new device driver usb
[ 3.315241] parport_pc 00:05: reported by Plug and Play ACPI
[ 3.315290] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 3.338771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.340951] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.340986] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 3.341017] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.346896] sr0: scsi3-mmc drive: 94x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.346901] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.347043] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.353357] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.353398] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.353465] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.354513] EDAC MC: Ver: 2.1.0 Dec 2 2011
[ 3.354818] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.354846] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 3.354850] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.354862] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 3.356039] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.356069] QUIRK: Enable AMD PLL fix
[ 3.356080] ehci_hcd 0000:00:12.2: debug port 1
[ 3.356103] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff800
[ 3.368019] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.368047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.368050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.368052] usb usb1: Product: EHCI Host Controller
[ 3.368054] usb usb1: Manufacturer: Linux 2.6.39 ehci_hcd
[ 3.368056] usb usb1: SerialNumber: 0000:00:12.2
[ 3.368189] hub 1-0:1.0: USB hub found
[ 3.368193] hub 1-0:1.0: 5 ports detected
[ 3.368325] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.368369] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.368381] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 3.370314] [drm] Initialized drm 1.1.0 20060810
[ 3.380237] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.381417] AMD64 EDAC driver v3.4.0
[ 3.385711] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfebf0000
[ 3.385798] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 3.385803] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 3.385808] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 3.385812] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 3.385818] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 3.385895] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.385898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.385900] usb usb2: Product: xHCI Host Controller
[ 3.385902] usb usb2: Manufacturer: Linux 2.6.39 xhci_hcd
[ 3.385903] usb usb2: SerialNumber: 0000:02:00.0
[ 3.386034] xHCI xhci_add_endpoint called for root hub
[ 3.386036] xHCI xhci_check_bandwidth called for root hub
[ 3.386062] hub 2-0:1.0: USB hub found
[ 3.386068] hub 2-0:1.0: 2 ports detected
[ 3.386130] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 3.386141] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 3.388094] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.388125] ehci_hcd 0000:00:13.2: debug port 1
[ 3.388141] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe9ff400
[ 3.389306] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.400053] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.400057] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.400060] usb usb4: Product: xHCI Host Controller
[ 3.400062] usb usb4: Manufacturer: Linux 2.6.39 xhci_hcd
[ 3.400063] usb usb4: SerialNumber: 0000:02:00.0
[ 3.400171] xHCI xhci_add_endpoint called for root hub
[ 3.400173] xHCI xhci_check_bandwidth called for root hub
[ 3.400199] hub 4-0:1.0: USB hub found
[ 3.400204] hub 4-0:1.0: 2 ports detected
[ 3.404061] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.404095] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.404098] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.404100] usb usb3: Product: EHCI Host Controller
[ 3.404102] usb usb3: Manufacturer: Linux 2.6.39 ehci_hcd
[ 3.404104] usb usb3: SerialNumber: 0000:00:13.2
[ 3.404282] hub 3-0:1.0: USB hub found
[ 3.404287] hub 3-0:1.0: 5 ports detected
[ 3.404790] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.404845] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 3.404869] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 3.424108] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.424139] ehci_hcd 0000:00:16.2: debug port 1
[ 3.424156] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe9ff000
[ 3.436125] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 3.436158] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.436161] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.436163] usb usb5: Product: EHCI Host Controller
[ 3.436165] usb usb5: Manufacturer: Linux 2.6.39 ehci_hcd
[ 3.436167] usb usb5: SerialNumber: 0000:00:16.2
[ 3.436313] hub 5-0:1.0: USB hub found
[ 3.436323] hub 5-0:1.0: 4 ports detected
[ 3.436697] EDAC amd64: DRAM ECC enabled.
[ 3.436708] EDAC amd64: F10h detected (node 0).
[ 3.436725] EDAC MC: DCT0 chip selects:
[ 3.436726] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 3.436728] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 3.436730] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 3.436731] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 3.436733] EDAC MC: DCT1 chip selects:
[ 3.436735] EDAC amd64: MC: 0: 2048MB 1: 2048MB
[ 3.436737] EDAC amd64: MC: 2: 2048MB 3: 2048MB
[ 3.436738] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 3.436740] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 3.436741] EDAC amd64: using x4 syndromes.
[ 3.436743] EDAC amd64: MCT channel count: 1
[ 3.436775] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
[ 3.436852] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.436856] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 3.436900] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.436921] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 3.452164] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe9fe000
[ 3.476033] [drm] radeon kernel modesetting enabled.
[ 3.476250] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.476256] radeon 0000:01:00.0: setting latency timer to 64
[ 3.476465] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BA).
[ 3.476502] [drm] register mmio base: 0xFEAE0000
[ 3.476504] [drm] register mmio size: 131072
[ 3.481009] ATOM BIOS: GV
[ 3.481032] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.481035] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 3.481272] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.481275] [drm] RAM width 128bits DDR
[ 3.481354] [TTM] Zone kernel: Available graphics memory: 4099078 kiB.
[ 3.481356] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 3.481358] [TTM] Initializing pool allocator.
[ 3.481386] [drm] radeon: 1024M of VRAM memory ready
[ 3.481391] [drm] radeon: 512M of GTT memory ready.
[ 3.481409] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.481410] [drm] Driver supports precise vblank timestamp query.
[ 3.481447] radeon 0000:01:00.0: irq 49 for MSI/MSI-X
[ 3.481452] radeon 0000:01:00.0: radeon: using MSI.
[ 3.481480] [drm] radeon: irq initialized.
[ 3.481485] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.482571] [drm] Loading JUNIPER Microcode
[ 3.497049] radeon 0000:01:00.0: WB enabled
[ 3.517167] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.517170] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.517172] usb usb6: Product: OHCI Host Controller
[ 3.517174] usb usb6: Manufacturer: Linux 2.6.39 ohci_hcd
[ 3.517176] usb usb6: SerialNumber: 0000:00:12.0
[ 3.517305] hub 6-0:1.0: USB hub found
[ 3.517311] hub 6-0:1.0: 5 ports detected
[ 3.517401] [drm] ring test succeeded in 1 usecs
[ 3.517521] [drm] radeon: ib pool ready.
[ 3.517586] [drm] ib test succeeded in 0 usecs
[ 3.517592] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 3.518004] [drm] Radeon Display Connectors
[ 3.518005] [drm] Connector 0:
[ 3.518006] [drm] DisplayPort
[ 3.518008] [drm] HPD4
[ 3.518010] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 3.518011] [drm] Encoders:
[ 3.518013] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.518014] [drm] Connector 1:
[ 3.518015] [drm] HDMI-A
[ 3.518016] [drm] HPD5
[ 3.518018] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 3.518020] [drm] Encoders:
[ 3.518021] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.518022] [drm] Connector 2:
[ 3.518024] [drm] DVI-I
[ 3.518025] [drm] HPD1
[ 3.518027] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 3.518028] [drm] Encoders:
[ 3.518029] [drm] DFP3: INTERNAL_UNIPHY1
[ 3.518031] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 3.518032] [drm] Connector 3:
[ 3.518033] [drm] DVI-I
[ 3.518034] [drm] HPD6
[ 3.518036] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 3.518038] [drm] Encoders:
[ 3.518039] [drm] DFP4: INTERNAL_UNIPHY
[ 3.518041] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.528021] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.528074] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.528088] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 3.544033] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fd000
[ 3.604030] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.604032] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.604035] usb usb7: Product: OHCI Host Controller
[ 3.604037] usb usb7: Manufacturer: Linux 2.6.39 ohci_hcd
[ 3.604038] usb usb7: SerialNumber: 0000:00:13.0
[ 3.604153] hub 7-0:1.0: USB hub found
[ 3.604158] hub 7-0:1.0: 5 ports detected
[ 3.612049] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.612063] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 3.612072] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 3.660063] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fc000
[ 3.684067] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 3.719991] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.719994] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.720009] usb usb8: Product: OHCI Host Controller
[ 3.720011] usb usb8: Manufacturer: Linux 2.6.39 ohci_hcd
[ 3.720013] usb usb8: SerialNumber: 0000:00:14.5
[ 3.720105] hub 8-0:1.0: USB hub found
[ 3.720110] hub 8-0:1.0: 2 ports detected
[ 3.732058] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.732071] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 3.732079] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 3.756063] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe9f3000
[ 3.816016] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.816019] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.816021] usb usb9: Product: OHCI Host Controller
[ 3.816023] usb usb9: Manufacturer: Linux 2.6.39 ohci_hcd
[ 3.816025] usb usb9: SerialNumber: 0000:00:16.0
[ 3.816117] hub 9-0:1.0: USB hub found
[ 3.816121] hub 9-0:1.0: 4 ports detected
[ 3.817954] usb 1-1: New USB device found, idVendor=04a9, idProduct=1909
[ 3.817959] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.817961] usb 1-1: Product: CanoScan
[ 3.817963] usb 1-1: Manufacturer: Canon
[ 3.820035] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.862679] hda_codec: ALC887-VD: BIOS auto-probing.
[ 3.867233] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 4.068516] [drm] Internal thermal controller with fan control
[ 4.068568] [drm] radeon: power management initialized
[ 4.157659] [drm] fb mappable at 0xD0141000
[ 4.157661] [drm] vram apper at 0xD0000000
[ 4.157663] [drm] size 8294400
[ 4.157664] [drm] fb depth is 24
[ 4.157666] [drm] pitch is 7680
[ 4.157746] fbcon: radeondrmfb (fb0) is primary device
[ 4.304070] usb 6-2: new full speed USB device number 2 using ohci_hcd
[ 4.371473] Console: switching to colour frame buffer device 240x67
[ 4.378734] fb0: radeondrmfb frame buffer device
[ 4.378735] drm: registered panic notifier
[ 4.378746] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
[ 4.379004] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.379092] HDA Intel 0000:01:00.1: irq 50 for MSI/MSI-X
[ 4.379114] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 4.479229] usb 6-2: New USB device found, idVendor=0764, idProduct=0501
[ 4.479233] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.479236] usb 6-2: Product: CRDA103.981
[ 4.479238] usb 6-2: Manufacturer: CP850PFCLCD
[ 4.479239] usb 6-2: SerialNumber: CPS
[ 4.533377] generic-usb 0003:0764:0501.0001: hiddev0,hidraw0: USB HID v1.10 Device [CP850PFCLCD CRDA103.981] on usb-0000:00:12.0-2/input0
[ 4.533396] usbcore: registered new interface driver usbhid
[ 4.533398] usbhid: USB HID core driver
[ 4.748075] usb 6-5: new low speed USB device number 3 using ohci_hcd
[ 4.925224] usb 6-5: New USB device found, idVendor=045e, idProduct=0780
[ 4.925228] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.925230] usb 6-5: Product: Comfort Curve Keyboard 3000
[ 4.925232] usb 6-5: Manufacturer: Microsoft
[ 4.972171] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input4
[ 4.972274] generic-usb 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:12.0-5/input0
[ 4.982368] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.1/input/input5
[ 4.982462] generic-usb 0003:045E:0780.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:12.0-5/input1
[ 5.092078] usb 5-1: new high speed USB device number 2 using ehci_hcd
[ 5.226327] usb 5-1: New USB device found, idVendor=0421, idProduct=01c7
[ 5.226331] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.226333] usb 5-1: Product: N900 (Storage Mode)
[ 5.226335] usb 5-1: Manufacturer: Nokia
[ 5.226337] usb 5-1: SerialNumber: 372041756775
[ 5.233131] usbcore: registered new interface driver uas
[ 5.243405] Initializing USB Mass Storage driver...
[ 5.243606] scsi6 : usb-storage 5-1:1.0
[ 5.243808] usbcore: registered new interface driver usb-storage
[ 5.243811] USB Mass Storage support registered.
[ 5.492074] usb 7-1: new low speed USB device number 2 using ohci_hcd
[ 5.661066] usb 7-1: New USB device found, idVendor=045e, idProduct=077b
[ 5.661069] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.661071] usb 7-1: Product: Comfort Mouse 3000
[ 5.661073] usb 7-1: Manufacturer: Microsoft
[ 5.675566] input: Microsoft Comfort Mouse 3000 as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input6
[ 5.675684] generic-usb 0003:045E:077B.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Comfort Mouse 3000] on usb-0000:00:13.0-1/input0
[ 6.240964] scsi 6:0:0:0: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2
[ 6.241452] scsi 6:0:0:1: Direct-Access Nokia N900 031 PQ: 0 ANSI: 2
[ 6.241918] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6.242070] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 6.246941] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 6.247661] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 6.670761] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 6.694420] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 6.716189] loop: module loaded
[ 6.726073] powernow-k8: Found 1 AMD Athlon(tm) II X4 610e Processor (4 cpu cores) (version 2.20.00)
[ 6.726141] powernow-k8: 0 : pstate 0 (2400 MHz)
[ 6.726143] powernow-k8: 1 : pstate 1 (1900 MHz)
[ 6.726145] powernow-k8: 2 : pstate 2 (1700 MHz)
[ 6.726146] powernow-k8: 3 : pstate 3 (800 MHz)
[ 7.071434] Adding 16777212k swap on /dev/mapper/vg--linux-swap. Priority:-1 extents:1 across:16777212k
[ 7.166259] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.180858] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 7.404764] r8169 0000:03:00.0: eth0: link down
[ 7.404783] r8169 0000:03:00.0: eth0: link down
[ 7.407381] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.802633] lp0: using parport0 (interrupt-driven).
[ 7.807588] ppdev: user-space parallel port driver
[ 8.143608] sshd (1216): /proc/1216/oom_adj is deprecated, please use /proc/1216/oom_score_adj instead.
[ 9.614426] r8169 0000:03:00.0: eth0: link up
[ 9.617036] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.480045] eth0: no IPv6 routers present
Reply to: