Bug#647770: linux-image-2.6.32-5-amd64: Random system freeze after "ohci_hcd 0000:00:12.0: HC died; cleaning up"
Package: linux-2.6
Version: 2.6.32-38
Severity: important
Completely random, my system freezes. After that even magic alt+print can't
help, only reset. Logs are clear. Then, I could catch something over the
netconsole. As I think, the bug could be somewhere at drivers/usb/host/ohci-
hcd.c. That occurs as said completely random, no correlation to using of usb.
Original kernel log from the system:
Nov 5 19:55:38 et kernel: imklog 4.6.4, log source = /proc/kmsg started.
Nov 5 19:55:38 et kernel: [ 0.000000] Initializing cgroup subsys cpuset
Nov 5 19:55:38 et kernel: [ 0.000000] Initializing cgroup subsys cpu
Nov 5 19:55:38 et kernel: [ 0.000000] Linux version 2.6.32-5-amd64 (Debian
2.6.32-38) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP
Mon Oct 3 03:59:20 UTC 2011
Nov 5 19:55:38 et kernel: [ 0.000000] Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=09bd4fd5-1239-4a49-afb0-7fbe0f216358 ro debug ignore_loglevel
Nov 5 19:55:38 et kernel: [ 0.000000] KERNEL supported cpus:
Nov 5 19:55:38 et kernel: [ 0.000000] Intel GenuineIntel
Nov 5 19:55:38 et kernel: [ 0.000000] AMD AuthenticAMD
Nov 5 19:55:38 et kernel: [ 0.000000] Centaur CentaurHauls
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-provided physical RAM map:
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-e820: 00000000000e6000 -
0000000000100000 (reserved)
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-e820: 0000000000100000 -
00000000cff90000 (usable)
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-e820: 00000000cff90000 -
00000000cff9e000 (ACPI data)
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-e820: 00000000cff9e000 -
00000000cffe0000 (ACPI NVS)
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-e820: 00000000cffe0000 -
00000000d0000000 (reserved)
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-e820: 00000000fff00000 -
0000000100000000 (reserved)
Nov 5 19:55:38 et kernel: [ 0.000000] BIOS-e820: 0000000100000000 -
0000000130000000 (usable)
Nov 5 19:55:38 et kernel: [ 0.000000] debug: ignoring loglevel setting.
Nov 5 19:55:38 et kernel: [ 0.000000] DMI present.
Nov 5 19:55:38 et kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt
low RAM, working around it.
Nov 5 19:55:38 et kernel: [ 0.000000] e820 update range: 0000000000000000 -
0000000000010000 (usable) ==> (reserved)
Nov 5 19:55:38 et kernel: [ 0.000000] last_pfn = 0x130000 max_arch_pfn =
0x400000000
Nov 5 19:55:38 et kernel: [ 0.000000] MTRR default type: uncachable
Nov 5 19:55:38 et kernel: [ 0.000000] MTRR fixed ranges enabled:
Nov 5 19:55:38 et kernel: [ 0.000000] 00000-9FFFF write-back
Nov 5 19:55:38 et kernel: [ 0.000000] A0000-EFFFF uncachable
Nov 5 19:55:38 et kernel: [ 0.000000] F0000-FFFFF write-protect
Nov 5 19:55:38 et kernel: [ 0.000000] MTRR variable ranges enabled:
Nov 5 19:55:38 et kernel: [ 0.000000] 0 base 000000000000 mask
FFFF80000000 write-back
Nov 5 19:55:38 et kernel: [ 0.000000] 1 base 000080000000 mask
FFFFC0000000 write-back
Nov 5 19:55:38 et kernel: [ 0.000000] 2 base 0000C0000000 mask
FFFFF0000000 write-back
Nov 5 19:55:38 et kernel: [ 0.000000] 3 disabled
Nov 5 19:55:38 et kernel: [ 0.000000] 4 disabled
Nov 5 19:55:38 et kernel: [ 0.000000] 5 disabled
Nov 5 19:55:38 et kernel: [ 0.000000] 6 disabled
Nov 5 19:55:38 et kernel: [ 0.000000] 7 disabled
Nov 5 19:55:38 et kernel: [ 0.000000] TOM2: 0000000130000000 aka 4864M
Nov 5 19:55:38 et kernel: [ 0.000000] x86 PAT enabled: cpu 0, old
0x7040600070406, new 0x7010600070106
Nov 5 19:55:38 et kernel: [ 0.000000] e820 update range: 00000000d0000000 -
0000000100000000 (usable) ==> (reserved)
Nov 5 19:55:38 et kernel: [ 0.000000] last_pfn = 0xcff90 max_arch_pfn =
0x400000000
Nov 5 19:55:38 et kernel: [ 0.000000] initial memory mapped : 0 - 20000000
Nov 5 19:55:38 et kernel: [ 0.000000] Using GB pages for direct mapping
Nov 5 19:55:38 et kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000cff90000
Nov 5 19:55:38 et kernel: [ 0.000000] 0000000000 - 00c0000000 page 1G
Nov 5 19:55:38 et kernel: [ 0.000000] 00c0000000 - 00cfe00000 page 2M
Nov 5 19:55:38 et kernel: [ 0.000000] 00cfe00000 - 00cff90000 page 4k
Nov 5 19:55:38 et kernel: [ 0.000000] kernel direct mapping tables up to
cff90000 @ 10000-13000
Nov 5 19:55:38 et kernel: [ 0.000000] init_memory_mapping:
0000000100000000-0000000130000000
Nov 5 19:55:38 et kernel: [ 0.000000] 0100000000 - 0130000000 page 2M
Nov 5 19:55:38 et kernel: [ 0.000000] kernel direct mapping tables up to
130000000 @ 12000-14000
Nov 5 19:55:38 et kernel: [ 0.000000] RAMDISK: 3771d000 - 37feff4e
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: RSDP 00000000000fad70 00014
(v00 ACPIAM)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: RSDT 00000000cff90000 0003C
(v01 7599MS A7599100 20090918 MSFT 00000097)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: FACP 00000000cff90200 00084
(v01 7599MS A7599100 20090918 MSFT 00000097)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI Warning: Optional field
Pm2ControlBlock has zero address or length: 0000000000000000/1
(20090903/tbfadt-557)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: DSDT 00000000cff90450 098AD
(v01 A7599 A7599100 00000100 INTL 20051117)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: FACS 00000000cff9e000 00040
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: APIC 00000000cff90390 0007C
(v01 7599MS A7599100 20090918 MSFT 00000097)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: MCFG 00000000cff90410 0003C
(v01 7599MS OEMMCFG 20090918 MSFT 00000097)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: OEMB 00000000cff9e040 00072
(v01 7599MS A7599100 20090918 MSFT 00000097)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: HPET 00000000cff99d00 00038
(v01 7599MS OEMHPET 20090918 MSFT 00000097)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: SSDT 00000000cff99d40 00458
(v01 A M I POWERNOW 00000001 AMD 00000001)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Nov 5 19:55:38 et kernel: [ 0.000000] Scanning NUMA topology in Northbridge
24
Nov 5 19:55:38 et kernel: [ 0.000000] No NUMA configuration found
Nov 5 19:55:38 et kernel: [ 0.000000] Faking a node at
0000000000000000-0000000130000000
Nov 5 19:55:38 et kernel: [ 0.000000] Bootmem setup node 0
0000000000000000-0000000130000000
Nov 5 19:55:38 et kernel: [ 0.000000] NODE_DATA [0000000000013000 -
000000000001afff]
Nov 5 19:55:38 et kernel: [ 0.000000] bootmap [000000000001b000 -
0000000000040fff] pages 26
Nov 5 19:55:38 et kernel: [ 0.000000] (8 early reservations) ==> bootmem
[0000000000 - 0130000000]
Nov 5 19:55:38 et kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS
data page ==> [0000000000 - 0000001000]
Nov 5 19:55:38 et kernel: [ 0.000000] #1 [0000006000 - 0000008000]
TRAMPOLINE ==> [0000006000 - 0000008000]
Nov 5 19:55:38 et kernel: [ 0.000000] #2 [0001000000 - 000168a594]
TEXT DATA BSS ==> [0001000000 - 000168a594]
Nov 5 19:55:38 et kernel: [ 0.000000] #3 [003771d000 - 0037feff4e]
RAMDISK ==> [003771d000 - 0037feff4e]
Nov 5 19:55:38 et kernel: [ 0.000000] #4 [000009fc00 - 0000100000]
BIOS reserved ==> [000009fc00 - 0000100000]
Nov 5 19:55:38 et kernel: [ 0.000000] #5 [000168b000 - 000168b1a7]
BRK ==> [000168b000 - 000168b1a7]
Nov 5 19:55:38 et kernel: [ 0.000000] #6 [0000010000 - 0000012000]
PGTABLE ==> [0000010000 - 0000012000]
Nov 5 19:55:38 et kernel: [ 0.000000] #7 [0000012000 - 0000013000]
PGTABLE ==> [0000012000 - 0000013000]
Nov 5 19:55:38 et kernel: [ 0.000000] found SMP MP-table at
[ffff8800000ff780] ff780
Nov 5 19:55:38 et kernel: [ 0.000000] [ffffea0000000000-ffffea00043fffff]
PMD -> [ffff880001800000-ffff8800051fffff] on node 0
Nov 5 19:55:38 et kernel: [ 0.000000] Zone PFN ranges:
Nov 5 19:55:38 et kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Nov 5 19:55:38 et kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Nov 5 19:55:38 et kernel: [ 0.000000] Normal 0x00100000 -> 0x00130000
Nov 5 19:55:38 et kernel: [ 0.000000] Movable zone start PFN for each node
Nov 5 19:55:38 et kernel: [ 0.000000] early_node_map[3] active PFN ranges
Nov 5 19:55:38 et kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Nov 5 19:55:38 et kernel: [ 0.000000] 0: 0x00000100 -> 0x000cff90
Nov 5 19:55:38 et kernel: [ 0.000000] 0: 0x00100000 -> 0x00130000
Nov 5 19:55:38 et kernel: [ 0.000000] On node 0 totalpages: 1048351
Nov 5 19:55:38 et kernel: [ 0.000000] DMA zone: 56 pages used for memmap
Nov 5 19:55:38 et kernel: [ 0.000000] DMA zone: 102 pages reserved
Nov 5 19:55:38 et kernel: [ 0.000000] DMA zone: 3825 pages, LIFO batch:0
Nov 5 19:55:38 et kernel: [ 0.000000] DMA32 zone: 14280 pages used for
memmap
Nov 5 19:55:38 et kernel: [ 0.000000] DMA32 zone: 833480 pages, LIFO
batch:31
Nov 5 19:55:38 et kernel: [ 0.000000] Normal zone: 2688 pages used for
memmap
Nov 5 19:55:38 et kernel: [ 0.000000] Normal zone: 193920 pages, LIFO
batch:31
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x00] enabled)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x01] enabled)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x82] disabled)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x83] disabled)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05]
lapic_id[0x84] disabled)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06]
lapic_id[0x85] disabled)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: IOAPIC (id[0x02]
address[0xfec00000] gsi_base[0])
Nov 5 19:55:38 et kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 33,
address 0xfec00000, GSI 0-23
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 9 low level)
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: IRQ0 used by override.
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: IRQ2 used by override.
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: IRQ9 used by override.
Nov 5 19:55:38 et kernel: [ 0.000000] Using ACPI (MADT) for SMP
configuration information
Nov 5 19:55:38 et kernel: [ 0.000000] ACPI: HPET id: 0x8300 base:
0xfed00000
Nov 5 19:55:38 et kernel: [ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
Nov 5 19:55:38 et kernel: [ 0.000000] nr_irqs_gsi: 24
Nov 5 19:55:38 et kernel: [ 0.000000] PM: Registered nosave memory:
000000000009f000 - 00000000000a0000
Nov 5 19:55:38 et kernel: [ 0.000000] PM: Registered nosave memory:
00000000000a0000 - 00000000000e6000
Nov 5 19:55:38 et kernel: [ 0.000000] PM: Registered nosave memory:
00000000000e6000 - 0000000000100000
Nov 5 19:55:38 et kernel: [ 0.000000] PM: Registered nosave memory:
00000000cff90000 - 00000000cff9e000
Nov 5 19:55:38 et kernel: [ 0.000000] PM: Registered nosave memory:
00000000cff9e000 - 00000000cffe0000
Nov 5 19:55:38 et kernel: [ 0.000000] PM: Registered nosave memory:
00000000cffe0000 - 00000000d0000000
Nov 5 19:55:38 et kernel: [ 0.000000] PM: Registered nosave memory:
00000000d0000000 - 00000000fff00000
Nov 5 19:55:38 et kernel: [ 0.000000] PM: Registered nosave memory:
00000000fff00000 - 0000000100000000
Nov 5 19:55:38 et kernel: [ 0.000000] Allocating PCI resources starting at
d0000000 (gap: d0000000:2ff00000)
Nov 5 19:55:38 et kernel: [ 0.000000] Booting paravirtualized kernel on
bare hardware
Nov 5 19:55:38 et kernel: [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:6 nr_node_ids:1
Nov 5 19:55:38 et kernel: [ 0.000000] PERCPU: Embedded 30 pages/cpu
@ffff880005400000 s90328 r8192 d24360 u262144
Nov 5 19:55:38 et kernel: [ 0.000000] pcpu-alloc: s90328 r8192 d24360
u262144 alloc=1*2097152
Nov 5 19:55:38 et kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
Nov 5 19:55:38 et kernel: [ 0.000000] Built 1 zonelists in Node order,
mobility grouping on. Total pages: 1031225
Nov 5 19:55:38 et kernel: [ 0.000000] Policy zone: Normal
Nov 5 19:55:38 et kernel: [ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=09bd4fd5-1239-4a49-afb0-7fbe0f216358 ro debug ignore_loglevel
Nov 5 19:55:38 et kernel: [ 0.000000] PID hash table entries: 4096 (order:
3, 32768 bytes)
Nov 5 19:55:38 et kernel: [ 0.000000] Initializing CPU#0
Nov 5 19:55:38 et kernel: [ 0.000000] Checking aperture...
Nov 5 19:55:38 et kernel: [ 0.000000] No AGP bridge found
Nov 5 19:55:38 et kernel: [ 0.000000] Node 0: aperture @ 20000000 size 32
MB
Nov 5 19:55:38 et kernel: [ 0.000000] Aperture pointing to e820 RAM.
Ignoring.
Nov 5 19:55:38 et kernel: [ 0.000000] Your BIOS doesn't leave a aperture
memory hole
Nov 5 19:55:38 et kernel: [ 0.000000] Please enable the IOMMU option in the
BIOS setup
Nov 5 19:55:38 et kernel: [ 0.000000] This costs you 64 MB of RAM
Nov 5 19:55:38 et kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM
@ 20000000
Nov 5 19:55:38 et kernel: [ 0.000000] PM: Registered nosave memory:
0000000020000000 - 0000000024000000
Nov 5 19:55:38 et kernel: [ 0.000000] Memory: 4051596k/4980736k available
(3081k kernel code, 787332k absent, 141808k reserved, 1889k data, 592k init)
Nov 5 19:55:38 et kernel: [ 0.000000] SLUB: Genslabs=14, HWalign=64,
Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Nov 5 19:55:38 et kernel: [ 0.000000] Hierarchical RCU implementation.
Nov 5 19:55:38 et kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:456
Nov 5 19:55:38 et kernel: [ 0.000000] spurious 8259A interrupt: IRQ7.
Nov 5 19:55:38 et kernel: [ 0.000000] Console: colour VGA+ 80x25
Nov 5 19:55:38 et kernel: [ 0.000000] console [tty0] enabled
Nov 5 19:55:38 et kernel: [ 0.000000] hpet clockevent registered
Nov 5 19:55:38 et kernel: [ 0.000000] Fast TSC calibration using PIT
Nov 5 19:55:38 et kernel: [ 0.000000] Detected 3007.443 MHz processor.
Nov 5 19:55:38 et kernel: [ 0.008004] Calibrating delay loop (skipped),
value calculated using timer frequency.. 6014.87 BogoMIPS (lpj=12029756)
Nov 5 19:55:38 et kernel: [ 0.008149] Security Framework initialized
Nov 5 19:55:38 et kernel: [ 0.008217] SELinux: Disabled at boot.
Nov 5 19:55:38 et kernel: [ 0.008499] Dentry cache hash table entries:
524288 (order: 10, 4194304 bytes)
Nov 5 19:55:38 et kernel: [ 0.010014] Inode-cache hash table entries:
262144 (order: 9, 2097152 bytes)
Nov 5 19:55:38 et kernel: [ 0.010768] Mount-cache hash table entries: 256
Nov 5 19:55:38 et kernel: [ 0.010938] Initializing cgroup subsys ns
Nov 5 19:55:38 et kernel: [ 0.011004] Initializing cgroup subsys cpuacct
Nov 5 19:55:38 et kernel: [ 0.011070] Initializing cgroup subsys devices
Nov 5 19:55:38 et kernel: [ 0.011136] Initializing cgroup subsys freezer
Nov 5 19:55:38 et kernel: [ 0.011201] Initializing cgroup subsys net_cls
Nov 5 19:55:38 et kernel: [ 0.011282] CPU: L1 I Cache: 64K (64 bytes/line),
D cache 64K (64 bytes/line)
Nov 5 19:55:38 et kernel: [ 0.011350] CPU: L2 Cache: 1024K (64 bytes/line)
Nov 5 19:55:38 et kernel: [ 0.011416] CPU 0/0x0 -> Node 0
Nov 5 19:55:38 et kernel: [ 0.011480] tseg: 0000000000
Nov 5 19:55:38 et kernel: [ 0.011552] CPU: Physical Processor ID: 0
Nov 5 19:55:38 et kernel: [ 0.012006] CPU: Processor Core ID: 0
Nov 5 19:55:38 et kernel: [ 0.012071] mce: CPU supports 6 MCE banks
Nov 5 19:55:38 et kernel: [ 0.012142] Performance Events: AMD PMU driver.
Nov 5 19:55:38 et kernel: [ 0.012259] ... version: 0
Nov 5 19:55:38 et kernel: [ 0.012324] ... bit width: 48
Nov 5 19:55:38 et kernel: [ 0.012388] ... generic registers: 4
Nov 5 19:55:38 et kernel: [ 0.012453] ... value mask:
0000ffffffffffff
Nov 5 19:55:38 et kernel: [ 0.012519] ... max period:
00007fffffffffff
Nov 5 19:55:38 et kernel: [ 0.012585] ... fixed-purpose events: 0
Nov 5 19:55:38 et kernel: [ 0.012649] ... event mask:
000000000000000f
Nov 5 19:55:38 et kernel: [ 0.013239] ACPI: Core revision 20090903
Nov 5 19:55:38 et kernel: [ 0.028026] Setting APIC routing to flat
Nov 5 19:55:38 et kernel: [ 0.028383] ..TIMER: vector=0x30 apic1=0 pin1=2
apic2=-1 pin2=-1
Nov 5 19:55:38 et kernel: [ 0.068137] CPU0: AMD Athlon(tm) II X2 250
Processor stepping 02
Nov 5 19:55:38 et kernel: [ 0.072001] Booting processor 1 APIC 0x1 ip
0x6000
Nov 5 19:55:38 et kernel: [ 0.012000] Initializing CPU#1
Nov 5 19:55:38 et kernel: [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line),
D cache 64K (64 bytes/line)
Nov 5 19:55:38 et kernel: [ 0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
Nov 5 19:55:38 et kernel: [ 0.012000] CPU 1/0x1 -> Node 0
Nov 5 19:55:38 et kernel: [ 0.012000] CPU: Physical Processor ID: 0
Nov 5 19:55:38 et kernel: [ 0.012000] CPU: Processor Core ID: 1
Nov 5 19:55:38 et kernel: [ 0.156048] CPU1: AMD Athlon(tm) II X2 250
Processor stepping 02
Nov 5 19:55:38 et kernel: [ 0.156602] checking TSC synchronization [CPU#0
-> CPU#1]: passed.
Nov 5 19:55:38 et kernel: [ 0.160010] Brought up 2 CPUs
Nov 5 19:55:38 et kernel: [ 0.160075] Total of 2 processors activated
(12030.03 BogoMIPS).
Nov 5 19:55:38 et kernel: [ 0.160481] CPU0 attaching sched-domain:
Nov 5 19:55:38 et kernel: [ 0.160549] domain 0: span 0-1 level MC
Nov 5 19:55:38 et kernel: [ 0.160664] groups: group ffff88000540fbf0 cpus
0 group ffff88000544fbf0 cpus 1
Nov 5 19:55:38 et kernel: [ 0.160896] CPU1 attaching sched-domain:
Nov 5 19:55:38 et kernel: [ 0.160960] domain 0: span 0-1 level MC
Nov 5 19:55:38 et kernel: [ 0.161075] groups: group ffff88000544fbf0 cpus
1 group ffff88000540fbf0 cpus 0
Nov 5 19:55:38 et kernel: [ 0.161357] devtmpfs: initialized
Nov 5 19:55:38 et kernel: [ 0.164128] regulator: core version 0.5
Nov 5 19:55:38 et kernel: [ 0.164141] NET: Registered protocol family 16
Nov 5 19:55:38 et kernel: [ 0.164264] node 0 link 0: io port [1000, ffffff]
Nov 5 19:55:38 et kernel: [ 0.164330] TOM: 00000000d0000000 aka 3328M
Nov 5 19:55:38 et kernel: [ 0.164395] Fam 10h mmconf [e0000000, efffffff]
Nov 5 19:55:38 et kernel: [ 0.164462] node 0 link 0: mmio [e0000000,
efffffff] ==> none
Nov 5 19:55:38 et kernel: [ 0.164579] node 0 link 0: mmio [f0000000,
ffffffff]
Nov 5 19:55:38 et kernel: [ 0.164695] node 0 link 0: mmio [a0000, bffff]
Nov 5 19:55:38 et kernel: [ 0.164811] node 0 link 0: mmio [d0000000,
dfffffff]
Nov 5 19:55:38 et kernel: [ 0.164927] TOM2: 0000000130000000 aka 4864M
Nov 5 19:55:38 et kernel: [ 0.164992] bus: [00,07] on node 0 link 0
Nov 5 19:55:38 et kernel: [ 0.165057] bus: 00 index 0 io port: [0, ffff]
Nov 5 19:55:38 et kernel: [ 0.165122] bus: 00 index 1 mmio: [f0000000,
ffffffff]
Nov 5 19:55:38 et kernel: [ 0.165188] bus: 00 index 2 mmio: [a0000, bffff]
Nov 5 19:55:38 et kernel: [ 0.165253] bus: 00 index 3 mmio: [d0000000,
dfffffff]
Nov 5 19:55:38 et kernel: [ 0.165319] bus: 00 index 4 mmio: [130000000,
fcffffffff]
Nov 5 19:55:38 et kernel: [ 0.165396] ACPI: bus type pci registered
Nov 5 19:55:38 et kernel: [ 0.165508] PCI: MCFG configuration 0: base
e0000000 segment 0 buses 0 - 255
Nov 5 19:55:38 et kernel: [ 0.165576] PCI: Not using MMCONFIG.
Nov 5 19:55:38 et kernel: [ 0.165641] PCI: Using configuration type 1 for
base access
Nov 5 19:55:38 et kernel: [ 0.165707] PCI: Using configuration type 1 for
extended access
Nov 5 19:55:38 et kernel: [ 0.165979] bio: create slab <bio-0> at 0
Nov 5 19:55:38 et kernel: [ 0.165979] ACPI: EC: Detected MSI hardware,
enabling workarounds.
Nov 5 19:55:38 et kernel: [ 0.165979] ACPI: EC: Look up EC in DSDT
Nov 5 19:55:38 et kernel: [ 0.168347] ACPI Error (psargs-0359): [ECEN]
Namespace lookup failure, AE_NOT_FOUND
Nov 5 19:55:38 et kernel: [ 0.168527] ACPI Error (psparse-0537): Method
parse/execution failed [\] (Node ffffffff8166d9d0), AE_NOT_FOUND
Nov 5 19:55:38 et kernel: [ 0.168973] ACPI: Executed 4 blocks of module-
level executable AML code
Nov 5 19:55:38 et kernel: [ 0.175644] ACPI: Interpreter enabled
Nov 5 19:55:38 et kernel: [ 0.175709] ACPI: (supports S0 S1 S4 S5)
Nov 5 19:55:38 et kernel: [ 0.175990] ACPI: Using IOAPIC for interrupt
routing
Nov 5 19:55:38 et kernel: [ 0.176043] PCI: MCFG configuration 0: base
e0000000 segment 0 buses 0 - 255
Nov 5 19:55:38 et kernel: [ 0.176973] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.177156] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.177336] ACPI Error (psparse-0537): Method
parse/execution failed [\PRID.P_D0._STA] (Node ffff88012fa4a860), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.177586] ACPI Error (uteval-0250): Method
execution failed [\PRID.P_D0._STA] (Node ffff88012fa4a860), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.177825] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.178006] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.178186] ACPI Error (psparse-0537): Method
parse/execution failed [\PRID.P_D1._STA] (Node ffff88012fa4a940), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.178435] ACPI Error (uteval-0250): Method
execution failed [\PRID.P_D1._STA] (Node ffff88012fa4a940), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.178675] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.178857] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.179037] ACPI Error (psparse-0537): Method
parse/execution failed [\SECD.S_D0._STA] (Node ffff88012fa4ab20), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.179285] ACPI Error (uteval-0250): Method
execution failed [\SECD.S_D0._STA] (Node ffff88012fa4ab20), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.179524] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.179705] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.179884] ACPI Error (psparse-0537): Method
parse/execution failed [\SECD.S_D1._STA] (Node ffff88012fa4ac00), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.180197] ACPI Error (uteval-0250): Method
execution failed [\SECD.S_D1._STA] (Node ffff88012fa4ac00), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.181377] PCI: MCFG area at e0000000 reserved
in ACPI motherboard resources
Nov 5 19:55:38 et kernel: [ 0.186536] PCI: Using MMCONFIG at e0000000 -
efffffff
Nov 5 19:55:38 et kernel: [ 0.191333] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.191516] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.191696] ACPI Error (psparse-0537): Method
parse/execution failed [\PRID.P_D0._STA] (Node ffff88012fa4a860), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.191953] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.192130] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.192310] ACPI Error (psparse-0537): Method
parse/execution failed [\PRID.P_D1._STA] (Node ffff88012fa4a940), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.192588] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.192769] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.192948] ACPI Error (psparse-0537): Method
parse/execution failed [\SECD.S_D0._STA] (Node ffff88012fa4ab20), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.193205] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.193387] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.193566] ACPI Error (psparse-0537): Method
parse/execution failed [\SECD.S_D1._STA] (Node ffff88012fa4ac00), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.193891] ACPI Warning: Incorrect checksum in
table [OEMB] - 77, should be 76 (20090903/tbutils-314)
Nov 5 19:55:38 et kernel: [ 0.194145] ACPI: No dock devices found.
Nov 5 19:55:38 et kernel: [ 0.194333] ACPI: PCI Root Bridge [PCI0]
(0000:00)
Nov 5 19:55:38 et kernel: [ 0.194433] pci 0000:00:00.0: reg 1c 64bit mmio:
[0xe0000000-0xffffffff]
Nov 5 19:55:38 et kernel: [ 0.194551] pci 0000:00:02.0: PME# supported from
D0 D3hot D3cold
Nov 5 19:55:38 et kernel: [ 0.194619] pci 0000:00:02.0: PME# disabled
Nov 5 19:55:38 et kernel: [ 0.194718] pci 0000:00:06.0: PME# supported from
D0 D3hot D3cold
Nov 5 19:55:38 et kernel: [ 0.194785] pci 0000:00:06.0: PME# disabled
Nov 5 19:55:38 et kernel: [ 0.194907] pci 0000:00:11.0: reg 10 io port:
[0xc000-0xc007]
Nov 5 19:55:38 et kernel: [ 0.194978] pci 0000:00:11.0: reg 14 io port:
[0xb000-0xb003]
Nov 5 19:55:38 et kernel: [ 0.195050] pci 0000:00:11.0: reg 18 io port:
[0xa000-0xa007]
Nov 5 19:55:38 et kernel: [ 0.195121] pci 0000:00:11.0: reg 1c io port:
[0x9000-0x9003]
Nov 5 19:55:38 et kernel: [ 0.195192] pci 0000:00:11.0: reg 20 io port:
[0x8000-0x800f]
Nov 5 19:55:38 et kernel: [ 0.195264] pci 0000:00:11.0: reg 24 32bit mmio:
[0xf9fffc00-0xf9ffffff]
Nov 5 19:55:38 et kernel: [ 0.195346] pci 0000:00:11.0: set SATA to AHCI
mode
Nov 5 19:55:38 et kernel: [ 0.195460] pci 0000:00:12.0: reg 10 32bit mmio:
[0xf9ffe000-0xf9ffefff]
Nov 5 19:55:38 et kernel: [ 0.195578] pci 0000:00:12.1: reg 10 32bit mmio:
[0xf9ffd000-0xf9ffdfff]
Nov 5 19:55:38 et kernel: [ 0.195714] pci 0000:00:12.2: reg 10 32bit mmio:
[0xf9fff800-0xf9fff8ff]
Nov 5 19:55:38 et kernel: [ 0.195830] pci 0000:00:12.2: supports D1 D2
Nov 5 19:55:38 et kernel: [ 0.195895] pci 0000:00:12.2: PME# supported from
D0 D1 D2 D3hot
Nov 5 19:55:38 et kernel: [ 0.195964] pci 0000:00:12.2: PME# disabled
Nov 5 19:55:38 et kernel: [ 0.196032] pci 0000:00:13.0: reg 10 32bit mmio:
[0xf9ffc000-0xf9ffcfff]
Nov 5 19:55:38 et kernel: [ 0.196150] pci 0000:00:13.1: reg 10 32bit mmio:
[0xf9ffb000-0xf9ffbfff]
Nov 5 19:55:38 et kernel: [ 0.196287] pci 0000:00:13.2: reg 10 32bit mmio:
[0xf9fff400-0xf9fff4ff]
Nov 5 19:55:38 et kernel: [ 0.196403] pci 0000:00:13.2: supports D1 D2
Nov 5 19:55:38 et kernel: [ 0.196468] pci 0000:00:13.2: PME# supported from
D0 D1 D2 D3hot
Nov 5 19:55:38 et kernel: [ 0.196537] pci 0000:00:13.2: PME# disabled
Nov 5 19:55:38 et kernel: [ 0.196712] pci 0000:00:14.1: reg 10 io port:
[0x00-0x07]
Nov 5 19:55:38 et kernel: [ 0.196783] pci 0000:00:14.1: reg 14 io port:
[0x00-0x03]
Nov 5 19:55:38 et kernel: [ 0.196854] pci 0000:00:14.1: reg 18 io port:
[0x00-0x07]
Nov 5 19:55:38 et kernel: [ 0.196924] pci 0000:00:14.1: reg 1c io port:
[0x00-0x03]
Nov 5 19:55:38 et kernel: [ 0.196995] pci 0000:00:14.1: reg 20 io port:
[0xff00-0xff0f]
Nov 5 19:55:38 et kernel: [ 0.197124] pci 0000:00:14.2: reg 10 64bit mmio:
[0xf9ff4000-0xf9ff7fff]
Nov 5 19:55:38 et kernel: [ 0.197231] pci 0000:00:14.2: PME# supported from
D0 D3hot D3cold
Nov 5 19:55:38 et kernel: [ 0.197300] pci 0000:00:14.2: PME# disabled
Nov 5 19:55:38 et kernel: [ 0.197464] pci 0000:00:14.5: reg 10 32bit mmio:
[0xf9ffa000-0xf9ffafff]
Nov 5 19:55:38 et kernel: [ 0.197680] pci 0000:01:00.0: reg 10 32bit mmio:
[0xfd000000-0xfdffffff]
Nov 5 19:55:38 et kernel: [ 0.197757] pci 0000:01:00.0: reg 14 64bit mmio
pref: [0xd0000000-0xdfffffff]
Nov 5 19:55:38 et kernel: [ 0.197833] pci 0000:01:00.0: reg 1c 64bit mmio:
[0xfa000000-0xfbffffff]
Nov 5 19:55:38 et kernel: [ 0.197905] pci 0000:01:00.0: reg 24 io port:
[0xd800-0xd87f]
Nov 5 19:55:38 et kernel: [ 0.197976] pci 0000:01:00.0: reg 30 32bit mmio
pref: [0xfe9e0000-0xfe9fffff]
Nov 5 19:55:38 et kernel: [ 0.204089] pci 0000:00:02.0: bridge io port:
[0xd000-0xdfff]
Nov 5 19:55:38 et kernel: [ 0.204159] pci 0000:00:02.0: bridge 32bit mmio:
[0xfa000000-0xfe9fffff]
Nov 5 19:55:38 et kernel: [ 0.204229] pci 0000:00:02.0: bridge 64bit mmio
pref: [0xd0000000-0xdfffffff]
Nov 5 19:55:38 et kernel: [ 0.204332] pci 0000:02:00.0: reg 10 io port:
[0xe800-0xe8ff]
Nov 5 19:55:38 et kernel: [ 0.204411] pci 0000:02:00.0: reg 18 64bit mmio
pref: [0xf8fff000-0xf8ffffff]
Nov 5 19:55:38 et kernel: [ 0.204487] pci 0000:02:00.0: reg 20 64bit mmio
pref: [0xf8ff8000-0xf8ffbfff]
Nov 5 19:55:38 et kernel: [ 0.204560] pci 0000:02:00.0: reg 30 32bit mmio
pref: [0xfeae0000-0xfeafffff]
Nov 5 19:55:38 et kernel: [ 0.204656] pci 0000:02:00.0: supports D1 D2
Nov 5 19:55:38 et kernel: [ 0.204720] pci 0000:02:00.0: PME# supported from
D0 D1 D2 D3hot D3cold
Nov 5 19:55:38 et kernel: [ 0.204790] pci 0000:02:00.0: PME# disabled
Nov 5 19:55:38 et kernel: [ 0.212087] pci 0000:00:06.0: bridge io port:
[0xe000-0xefff]
Nov 5 19:55:38 et kernel: [ 0.212157] pci 0000:00:06.0: bridge 32bit mmio:
[0xfea00000-0xfeafffff]
Nov 5 19:55:38 et kernel: [ 0.212226] pci 0000:00:06.0: bridge 64bit mmio
pref: [0xf8f00000-0xf8ffffff]
Nov 5 19:55:38 et kernel: [ 0.216058] pci 0000:03:07.0: reg 10 32bit mmio:
[0xfebf0000-0xfebfffff]
Nov 5 19:55:38 et kernel: [ 0.216237] pci 0000:00:14.4: transparent bridge
Nov 5 19:55:38 et kernel: [ 0.216306] pci 0000:00:14.4: bridge 32bit mmio:
[0xfeb00000-0xfebfffff]
Nov 5 19:55:38 et kernel: [ 0.216393] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
Nov 5 19:55:38 et kernel: [ 0.216657] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCE2._PRT]
Nov 5 19:55:38 et kernel: [ 0.216770] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCE6._PRT]
Nov 5 19:55:38 et kernel: [ 0.216898] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P0PC._PRT]
Nov 5 19:55:38 et kernel: [ 0.222932] ACPI: PCI Interrupt Link [LNKA] (IRQs
4 *7 10 11 12 14 15)
Nov 5 19:55:38 et kernel: [ 0.223524] ACPI: PCI Interrupt Link [LNKB] (IRQs
4 7 *10 11 12 14 15)
Nov 5 19:55:38 et kernel: [ 0.224074] ACPI: PCI Interrupt Link [LNKC] (IRQs
4 7 *10 11 12 14 15)
Nov 5 19:55:38 et kernel: [ 0.224663] ACPI: PCI Interrupt Link [LNKD] (IRQs
4 7 10 *11 12 14 15)
Nov 5 19:55:38 et kernel: [ 0.225252] ACPI: PCI Interrupt Link [LNKE] (IRQs
4 7 10 11 12 14 15) *0, disabled.
Nov 5 19:55:38 et kernel: [ 0.225953] ACPI: PCI Interrupt Link [LNKF] (IRQs
4 7 10 11 12 14 15) *0, disabled.
Nov 5 19:55:38 et kernel: [ 0.226653] ACPI: PCI Interrupt Link [LNKG] (IRQs
10 *11 12 14 15)
Nov 5 19:55:38 et kernel: [ 0.227142] ACPI: PCI Interrupt Link [LNKH] (IRQs
4 7 10 11 12 14 15) *0, disabled.
Nov 5 19:55:38 et kernel: [ 0.227845] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Nov 5 19:55:38 et kernel: [ 0.227924] vgaarb: loaded
Nov 5 19:55:38 et kernel: [ 0.228031] PCI: Using ACPI for IRQ routing
Nov 5 19:55:38 et kernel: [ 0.228096] pci 0000:00:00.0: BAR 3: address
space collision on of device [0xe0000000-0xffffffff]
Nov 5 19:55:38 et kernel: [ 0.228175] pci 0000:00:00.0: BAR 3: can't
allocate resource
Nov 5 19:55:38 et kernel: [ 0.228368] hpet0: at MMIO 0xfed00000, IRQs 2, 8,
0, 0
Nov 5 19:55:38 et kernel: [ 0.228686] hpet0: 4 comparators, 32-bit
14.318180 MHz counter
Nov 5 19:55:38 et kernel: [ 0.230773] Switching to clocksource tsc
Nov 5 19:55:38 et kernel: [ 0.230847] pnp: PnP ACPI init
Nov 5 19:55:38 et kernel: [ 0.230847] ACPI: bus type pnp registered
Nov 5 19:55:38 et kernel: [ 0.230847] pnp 00:0d: mem resource (0x0-0x9ffff)
overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Nov 5 19:55:38 et kernel: [ 0.230847] pnp 00:0d: mem resource
(0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Nov 5 19:55:38 et kernel: [ 0.230882] pnp 00:0d: mem resource
(0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Nov 5 19:55:38 et kernel: [ 0.230963] pnp 00:0d: mem resource
(0x100000-0xcfffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
Nov 5 19:55:38 et kernel: [ 0.231259] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.231442] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.231622] ACPI Error (psparse-0537): Method
parse/execution failed [\PRID.P_D0._STA] (Node ffff88012fa4a860), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.231872] ACPI Error (uteval-0250): Method
execution failed [\PRID.P_D0._STA] (Node ffff88012fa4a860), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.232111] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.232293] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.232473] ACPI Error (psparse-0537): Method
parse/execution failed [\PRID.P_D1._STA] (Node ffff88012fa4a940), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.232721] ACPI Error (uteval-0250): Method
execution failed [\PRID.P_D1._STA] (Node ffff88012fa4a940), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.232962] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.233144] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.233324] ACPI Error (psparse-0537): Method
parse/execution failed [\SECD.S_D0._STA] (Node ffff88012fa4ab20), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.233572] ACPI Error (uteval-0250): Method
execution failed [\SECD.S_D0._STA] (Node ffff88012fa4ab20), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.233820] ACPI Error: No handler for Region
[SACS] (ffff88012fa4f318) [PCI_Config] (20090903/evregion-319)
Nov 5 19:55:38 et kernel: [ 0.234002] ACPI Error: Region PCI_Config(2) has
no handler (20090903/exfldio-295)
Nov 5 19:55:38 et kernel: [ 0.234182] ACPI Error (psparse-0537): Method
parse/execution failed [\SECD.S_D1._STA] (Node ffff88012fa4ac00), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.234430] ACPI Error (uteval-0250): Method
execution failed [\SECD.S_D1._STA] (Node ffff88012fa4ac00), AE_NOT_EXIST
Nov 5 19:55:38 et kernel: [ 0.234663] pnp: PnP ACPI: found 14 devices
Nov 5 19:55:38 et kernel: [ 0.234728] ACPI: ACPI bus type pnp unregistered
Nov 5 19:55:38 et kernel: [ 0.234801] system 00:07: iomem range
0xfec00000-0xfec00fff could not be reserved
Nov 5 19:55:38 et kernel: [ 0.234879] system 00:07: iomem range
0xfee00000-0xfee00fff has been reserved
Nov 5 19:55:38 et kernel: [ 0.234950] system 00:08: ioport range
0x4d0-0x4d1 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235018] system 00:08: ioport range 0x40b-
0x40b has been reserved
Nov 5 19:55:38 et kernel: [ 0.235085] system 00:08: ioport range
0x4d6-0x4d6 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235153] system 00:08: ioport range
0xc00-0xc01 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235220] system 00:08: ioport range
0xc14-0xc14 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235288] system 00:08: ioport range
0xc50-0xc51 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235355] system 00:08: ioport range
0xc52-0xc52 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235423] system 00:08: ioport range 0xc6c-
0xc6c has been reserved
Nov 5 19:55:38 et kernel: [ 0.235490] system 00:08: ioport range 0xc6f-
0xc6f has been reserved
Nov 5 19:55:38 et kernel: [ 0.235558] system 00:08: ioport range
0xcd0-0xcd1 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235625] system 00:08: ioport range
0xcd2-0xcd3 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235693] system 00:08: ioport range
0xcd4-0xcd5 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235761] system 00:08: ioport range
0xcd6-0xcd7 has been reserved
Nov 5 19:55:38 et kernel: [ 0.235828] system 00:08: ioport range
0xcd8-0xcdf has been reserved
Nov 5 19:55:38 et kernel: [ 0.235896] system 00:08: ioport range
0x800-0x89f has been reserved
Nov 5 19:55:38 et kernel: [ 0.235964] system 00:08: ioport range
0xb00-0xb0f has been reserved
Nov 5 19:55:38 et kernel: [ 0.236031] system 00:08: ioport range
0xb20-0xb3f has been reserved
Nov 5 19:55:38 et kernel: [ 0.236099] system 00:08: ioport range
0x900-0x90f has been reserved
Nov 5 19:55:38 et kernel: [ 0.236166] system 00:08: ioport range
0x910-0x91f has been reserved
Nov 5 19:55:38 et kernel: [ 0.236234] system 00:08: ioport range
0xfe00-0xfefe has been reserved
Nov 5 19:55:38 et kernel: [ 0.236302] system 00:08: iomem range
0xffb80000-0xffbfffff has been reserved
Nov 5 19:55:38 et kernel: [ 0.236370] system 00:08: iomem range
0xfec10000-0xfec1001f has been reserved
Nov 5 19:55:38 et kernel: [ 0.236440] system 00:0b: ioport range
0x600-0x6df has been reserved
Nov 5 19:55:38 et kernel: [ 0.236507] system 00:0b: ioport range
0xae0-0xaef has been reserved
Nov 5 19:55:38 et kernel: [ 0.236576] system 00:0c: iomem range
0xe0000000-0xefffffff has been reserved
Nov 5 19:55:38 et kernel: [ 0.236646] system 00:0d: iomem range
0xfec00000-0xffffffff could not be reserved
Nov 5 19:55:38 et kernel: [ 0.241411] pci 0000:00:02.0: PCI bridge,
secondary bus 0000:01
Nov 5 19:55:38 et kernel: [ 0.241481] pci 0000:00:02.0: IO window:
0xd000-0xdfff
Nov 5 19:55:38 et kernel: [ 0.241548] pci 0000:00:02.0: MEM window:
0xfa000000-0xfe9fffff
Nov 5 19:55:38 et kernel: [ 0.241616] pci 0000:00:02.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
Nov 5 19:55:38 et kernel: [ 0.241696] pci 0000:00:06.0: PCI bridge,
secondary bus 0000:02
Nov 5 19:55:38 et kernel: [ 0.241763] pci 0000:00:06.0: IO window:
0xe000-0xefff
Nov 5 19:55:38 et kernel: [ 0.241830] pci 0000:00:06.0: MEM window:
0xfea00000-0xfeafffff
Nov 5 19:55:38 et kernel: [ 0.241898] pci 0000:00:06.0: PREFETCH window:
0x000000f8f00000-0x000000f8ffffff
Nov 5 19:55:38 et kernel: [ 0.241977] pci 0000:00:14.4: PCI bridge,
secondary bus 0000:03
Nov 5 19:55:38 et kernel: [ 0.242044] pci 0000:00:14.4: IO window:
disabled
Nov 5 19:55:38 et kernel: [ 0.242113] pci 0000:00:14.4: MEM window:
0xfeb00000-0xfebfffff
Nov 5 19:55:38 et kernel: [ 0.242182] pci 0000:00:14.4: PREFETCH window:
disabled
Nov 5 19:55:38 et kernel: [ 0.242259] alloc irq_desc for 18 on node 0
Nov 5 19:55:38 et kernel: [ 0.242324] alloc kstat_irqs on node 0
Nov 5 19:55:38 et kernel: [ 0.242393] pci 0000:00:02.0: PCI INT A -> GSI 18
(level, low) -> IRQ 18
Nov 5 19:55:38 et kernel: [ 0.242461] pci 0000:00:02.0: setting latency
timer to 64
Nov 5 19:55:38 et kernel: [ 0.242531] pci 0000:00:06.0: PCI INT A -> GSI 18
(level, low) -> IRQ 18
Nov 5 19:55:38 et kernel: [ 0.242598] pci 0000:00:06.0: setting latency
timer to 64
Nov 5 19:55:38 et kernel: [ 0.242670] pci_bus 0000:00: resource 0 io:
[0x00-0xffff]
Nov 5 19:55:38 et kernel: [ 0.242737] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
Nov 5 19:55:38 et kernel: [ 0.242805] pci_bus 0000:01: resource 0 io:
[0xd000-0xdfff]
Nov 5 19:55:38 et kernel: [ 0.242871] pci_bus 0000:01: resource 1 mem:
[0xfa000000-0xfe9fffff]
Nov 5 19:55:38 et kernel: [ 0.242939] pci_bus 0000:01: resource 2 pref mem
[0xd0000000-0xdfffffff]
Nov 5 19:55:38 et kernel: [ 0.243007] pci_bus 0000:02: resource 0 io:
[0xe000-0xefff]
Nov 5 19:55:38 et kernel: [ 0.243073] pci_bus 0000:02: resource 1 mem:
[0xfea00000-0xfeafffff]
Nov 5 19:55:38 et kernel: [ 0.243140] pci_bus 0000:02: resource 2 pref mem
[0xf8f00000-0xf8ffffff]
Nov 5 19:55:38 et kernel: [ 0.243208] pci_bus 0000:03: resource 1 mem:
[0xfeb00000-0xfebfffff]
Nov 5 19:55:38 et kernel: [ 0.243275] pci_bus 0000:03: resource 3 io:
[0x00-0xffff]
Nov 5 19:55:38 et kernel: [ 0.243341] pci_bus 0000:03: resource 4 mem:
[0x000000-0xffffffffffffffff]
Nov 5 19:55:38 et kernel: [ 0.243430] NET: Registered protocol family 2
Nov 5 19:55:38 et kernel: [ 0.243606] IP route cache hash table entries:
131072 (order: 8, 1048576 bytes)
Nov 5 19:55:38 et kernel: [ 0.244460] TCP established hash table entries:
524288 (order: 11, 8388608 bytes)
Nov 5 19:55:38 et kernel: [ 0.247412] TCP bind hash table entries: 65536
(order: 8, 1048576 bytes)
Nov 5 19:55:38 et kernel: [ 0.247835] TCP: Hash tables configured
(established 524288 bind 65536)
Nov 5 19:55:38 et kernel: [ 0.247903] TCP reno registered
Nov 5 19:55:38 et kernel: [ 0.248057] NET: Registered protocol family 1
Nov 5 19:55:38 et kernel: [ 0.389065] pci 0000:01:00.0: Boot video device
Nov 5 19:55:38 et kernel: [ 0.389172] Unpacking initramfs...
Nov 5 19:55:38 et kernel: [ 0.528936] Freeing initrd memory: 9035k freed
Nov 5 19:55:38 et kernel: [ 0.532723] PCI-DMA: Disabling AGP.
Nov 5 19:55:38 et kernel: [ 0.532975] PCI-DMA: aperture base @ 20000000
size 65536 KB
Nov 5 19:55:38 et kernel: [ 0.533042] PCI-DMA: using GART IOMMU.
Nov 5 19:55:38 et kernel: [ 0.533107] PCI-DMA: Reserving 64MB of IOMMU area
in the AGP aperture
Nov 5 19:55:38 et kernel: [ 0.534297] audit: initializing netlink socket
(disabled)
Nov 5 19:55:38 et kernel: [ 0.534377] type=2000 audit(1320522923.533:1):
initialized
Nov 5 19:55:38 et kernel: [ 0.536663] HugeTLB registered 2 MB page size,
pre-allocated 0 pages
Nov 5 19:55:38 et kernel: [ 0.537611] VFS: Disk quotas dquot_6.5.2
Nov 5 19:55:38 et kernel: [ 0.537709] Dquot-cache hash table entries: 512
(order 0, 4096 bytes)
Nov 5 19:55:38 et kernel: [ 0.537834] msgmni has been set to 7930
Nov 5 19:55:38 et kernel: [ 0.538079] alg: No test for stdrng (krng)
Nov 5 19:55:38 et kernel: [ 0.538214] Block layer SCSI generic (bsg) driver
version 0.4 loaded (major 253)
Nov 5 19:55:38 et kernel: [ 0.538295] io scheduler noop registered
Nov 5 19:55:38 et kernel: [ 0.538360] io scheduler anticipatory registered
Nov 5 19:55:38 et kernel: [ 0.538425] io scheduler deadline registered
Nov 5 19:55:38 et kernel: [ 0.538508] io scheduler cfq registered (default)
Nov 5 19:55:38 et kernel: [ 0.538701] alloc irq_desc for 24 on node 0
Nov 5 19:55:38 et kernel: [ 0.538770] alloc kstat_irqs on node 0
Nov 5 19:55:38 et kernel: [ 0.538840] pcieport 0000:00:02.0: irq 24 for
MSI/MSI-X
Nov 5 19:55:38 et kernel: [ 0.538909] pcieport 0000:00:02.0: setting
latency timer to 64
Nov 5 19:55:38 et kernel: [ 0.539092] alloc irq_desc for 25 on node 0
Nov 5 19:55:38 et kernel: [ 0.539157] alloc kstat_irqs on node 0
Nov 5 19:55:38 et kernel: [ 0.539224] pcieport 0000:00:06.0: irq 25 for
MSI/MSI-X
Nov 5 19:55:38 et kernel: [ 0.539293] pcieport 0000:00:06.0: setting
latency timer to 64
Nov 5 19:55:38 et kernel: [ 0.540253] Linux agpgart interface v0.103
Nov 5 19:55:38 et kernel: [ 0.540345] Serial: 8250/16550 driver, 4 ports,
IRQ sharing enabled
Nov 5 19:55:38 et kernel: [ 0.540505] serial8250: ttyS0 at I/O 0x3f8 (irq =
4) is a 16550A
Nov 5 19:55:38 et kernel: [ 0.540783] 00:05: ttyS0 at I/O 0x3f8 (irq = 4)
is a 16550A
Nov 5 19:55:38 et kernel: [ 0.540967] input: Macintosh mouse button
emulation as /devices/virtual/input/input0
Nov 5 19:55:38 et kernel: [ 0.541079] PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Nov 5 19:55:38 et kernel: [ 0.541561] serio: i8042 KBD port at 0x60,0x64
irq 1
Nov 5 19:55:38 et kernel: [ 0.541641] serio: i8042 AUX port at 0x60,0x64
irq 12
Nov 5 19:55:38 et kernel: [ 0.547581] mice: PS/2 mouse device common for
all mice
Nov 5 19:55:38 et kernel: [ 0.547685] rtc_cmos 00:02: RTC can wake from S4
Nov 5 19:55:38 et kernel: [ 0.547781] rtc_cmos 00:02: rtc core: registered
rtc_cmos as rtc0
Nov 5 19:55:38 et kernel: [ 0.547870] rtc0: alarms up to one month, y3k,
114 bytes nvram, hpet irqs
Nov 5 19:55:38 et kernel: [ 0.547945] cpuidle: using governor ladder
Nov 5 19:55:38 et kernel: [ 0.548009] cpuidle: using governor menu
Nov 5 19:55:38 et kernel: [ 0.548076] No iBFT detected.
Nov 5 19:55:38 et kernel: [ 0.548347] TCP cubic registered
Nov 5 19:55:38 et kernel: [ 0.548476] NET: Registered protocol family 10
Nov 5 19:55:38 et kernel: [ 0.549006] Mobile IPv6
Nov 5 19:55:38 et kernel: [ 0.549081] NET: Registered protocol family 17
Nov 5 19:55:38 et kernel: [ 0.549190] PM: Resume from disk failed.
Nov 5 19:55:38 et kernel: [ 0.549260] registered taskstats version 1
Nov 5 19:55:38 et kernel: [ 0.549628] rtc_cmos 00:02: setting system clock
to 2011-11-05 19:55:24 UTC (1320522924)
Nov 5 19:55:38 et kernel: [ 0.549732] Initalizing network drop monitor
service
Nov 5 19:55:38 et kernel: [ 0.549824] Freeing unused kernel memory: 592k
freed
Nov 5 19:55:38 et kernel: [ 0.550032] Write protecting the kernel read-only
data: 4236k
Nov 5 19:55:38 et kernel: [ 0.565443] udev[82]: starting version 164
Nov 5 19:55:38 et kernel: [ 0.572078] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input1
Nov 5 19:55:38 et kernel: [ 0.627006] usbcore: registered new interface
driver usbfs
Nov 5 19:55:38 et kernel: [ 0.627091] usbcore: registered new interface
driver hub
Nov 5 19:55:38 et kernel: [ 0.627232] usbcore: registered new device driver
usb
Nov 5 19:55:38 et kernel: [ 0.635006] ehci_hcd: USB 2.0 'Enhanced' Host
Controller (EHCI) Driver
Nov 5 19:55:38 et kernel: [ 0.635392] SCSI subsystem initialized
Nov 5 19:55:38 et kernel: [ 0.641038] alloc irq_desc for 17 on node 0
Nov 5 19:55:38 et kernel: [ 0.641104] alloc kstat_irqs on node 0
Nov 5 19:55:38 et kernel: [ 0.641173] ehci_hcd 0000:00:12.2: PCI INT B ->
GSI 17 (level, low) -> IRQ 17
Nov 5 19:55:38 et kernel: [ 0.641267] ehci_hcd 0000:00:12.2: EHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.641350] ehci_hcd 0000:00:12.2: new USB bus
registered, assigned bus number 1
Nov 5 19:55:38 et kernel: [ 0.641460] ehci_hcd 0000:00:12.2: debug port 1
Nov 5 19:55:38 et kernel: [ 0.641542] ehci_hcd 0000:00:12.2: irq 17, io mem
0xf9fff800
Nov 5 19:55:38 et kernel: [ 0.645101] libata version 3.00 loaded.
Nov 5 19:55:38 et kernel: [ 0.646394] r8169 Gigabit Ethernet driver 2.3LK-
NAPI loaded
Nov 5 19:55:38 et kernel: [ 0.646489] r8169 0000:02:00.0: PCI INT A -> GSI
18 (level, low) -> IRQ 18
Nov 5 19:55:38 et kernel: [ 0.646606] r8169 0000:02:00.0: setting latency
timer to 64
Nov 5 19:55:38 et kernel: [ 0.646704] alloc irq_desc for 26 on node 0
Nov 5 19:55:38 et kernel: [ 0.646770] alloc kstat_irqs on node 0
Nov 5 19:55:38 et kernel: [ 0.646844] r8169 0000:02:00.0: irq 26 for
MSI/MSI-X
Nov 5 19:55:38 et kernel: [ 0.647302] r8169 0000:02:00.0: eth0:
RTL8168d/8111d at 0xffffc9000065e000, 40:61:86:37:df:d0, XID 081000c0 IRQ 26
Nov 5 19:55:38 et kernel: [ 0.653059] ehci_hcd 0000:00:12.2: USB 2.0
started, EHCI 1.00
Nov 5 19:55:38 et kernel: [ 0.653147] usb usb1: New USB device found,
idVendor=1d6b, idProduct=0002
Nov 5 19:55:38 et kernel: [ 0.653215] usb usb1: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 5 19:55:38 et kernel: [ 0.653293] usb usb1: Product: EHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.653359] usb usb1: Manufacturer: Linux
2.6.32-5-amd64 ehci_hcd
Nov 5 19:55:38 et kernel: [ 0.653426] usb usb1: SerialNumber: 0000:00:12.2
Nov 5 19:55:38 et kernel: [ 0.653557] usb usb1: configuration #1 chosen
from 1 choice
Nov 5 19:55:38 et kernel: [ 0.653648] hub 1-0:1.0: USB hub found
Nov 5 19:55:38 et kernel: [ 0.653718] hub 1-0:1.0: 6 ports detected
Nov 5 19:55:38 et kernel: [ 0.653894] alloc irq_desc for 16 on node 0
Nov 5 19:55:38 et kernel: [ 0.653959] alloc kstat_irqs on node 0
Nov 5 19:55:38 et kernel: [ 0.654029] pata_atiixp 0000:00:14.1: PCI INT A
-> GSI 16 (level, low) -> IRQ 16
Nov 5 19:55:38 et kernel: [ 0.654126] pata_atiixp 0000:00:14.1: setting
latency timer to 64
Nov 5 19:55:38 et kernel: [ 0.654270] scsi0 : pata_atiixp
Nov 5 19:55:38 et kernel: [ 0.654399] scsi1 : pata_atiixp
Nov 5 19:55:38 et kernel: [ 0.655426] ata1: PATA max UDMA/100 cmd 0x1f0 ctl
0x3f6 bmdma 0xff00 irq 14
Nov 5 19:55:38 et kernel: [ 0.655495] ata2: PATA max UDMA/100 cmd 0x170 ctl
0x376 bmdma 0xff08 irq 15
Nov 5 19:55:38 et kernel: [ 0.655764] ahci 0000:00:11.0: version 3.0
Nov 5 19:55:38 et kernel: [ 0.655835] alloc irq_desc for 22 on node 0
Nov 5 19:55:38 et kernel: [ 0.655900] alloc kstat_irqs on node 0
Nov 5 19:55:38 et kernel: [ 0.655966] ahci 0000:00:11.0: PCI INT A -> GSI
22 (level, low) -> IRQ 22
Nov 5 19:55:38 et kernel: [ 0.656090] alloc irq_desc for 27 on node 0
Nov 5 19:55:38 et kernel: [ 0.656155] alloc kstat_irqs on node 0
Nov 5 19:55:38 et kernel: [ 0.656227] ahci 0000:00:11.0: irq 27 for
MSI/MSI-X
Nov 5 19:55:38 et kernel: [ 0.656362] ahci 0000:00:11.0: AHCI 0001.0100 32
slots 4 ports 3 Gbps 0xf impl SATA mode
Nov 5 19:55:38 et kernel: [ 0.656441] ahci 0000:00:11.0: flags: 64bit ncq
sntf ilck pm led clo pmp pio slum part ccc
Nov 5 19:55:38 et kernel: [ 0.656741] scsi2 : ahci
Nov 5 19:55:38 et kernel: [ 0.656853] scsi3 : ahci
Nov 5 19:55:38 et kernel: [ 0.656962] scsi4 : ahci
Nov 5 19:55:38 et kernel: [ 0.657077] scsi5 : ahci
Nov 5 19:55:38 et kernel: [ 0.657167] ata3: SATA max UDMA/133 abar
m1024@0xf9fffc00 port 0xf9fffd00 irq 27
Nov 5 19:55:38 et kernel: [ 0.657246] ata4: SATA max UDMA/133 abar
m1024@0xf9fffc00 port 0xf9fffd80 irq 27
Nov 5 19:55:38 et kernel: [ 0.657325] ata5: SATA max UDMA/133 abar
m1024@0xf9fffc00 port 0xf9fffe00 irq 27
Nov 5 19:55:38 et kernel: [ 0.657404] ata6: SATA max UDMA/133 abar
m1024@0xf9fffc00 port 0xf9fffe80 irq 27
Nov 5 19:55:38 et kernel: [ 0.657599] alloc irq_desc for 19 on node 0
Nov 5 19:55:38 et kernel: [ 0.657664] alloc kstat_irqs on node 0
Nov 5 19:55:38 et kernel: [ 0.657735] ehci_hcd 0000:00:13.2: PCI INT B ->
GSI 19 (level, low) -> IRQ 19
Nov 5 19:55:38 et kernel: [ 0.657818] ehci_hcd 0000:00:13.2: EHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.657897] ehci_hcd 0000:00:13.2: new USB bus
registered, assigned bus number 2
Nov 5 19:55:38 et kernel: [ 0.658002] ehci_hcd 0000:00:13.2: debug port 1
Nov 5 19:55:38 et kernel: [ 0.658082] ehci_hcd 0000:00:13.2: irq 19, io mem
0xf9fff400
Nov 5 19:55:38 et kernel: [ 0.669052] ehci_hcd 0000:00:13.2: USB 2.0
started, EHCI 1.00
Nov 5 19:55:38 et kernel: [ 0.669141] usb usb2: New USB device found,
idVendor=1d6b, idProduct=0002
Nov 5 19:55:38 et kernel: [ 0.669209] usb usb2: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 5 19:55:38 et kernel: [ 0.669287] usb usb2: Product: EHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.669352] usb usb2: Manufacturer: Linux
2.6.32-5-amd64 ehci_hcd
Nov 5 19:55:38 et kernel: [ 0.669419] usb usb2: SerialNumber: 0000:00:13.2
Nov 5 19:55:38 et kernel: [ 0.669555] usb usb2: configuration #1 chosen
from 1 choice
Nov 5 19:55:38 et kernel: [ 0.669642] hub 2-0:1.0: USB hub found
Nov 5 19:55:38 et kernel: [ 0.669712] hub 2-0:1.0: 6 ports detected
Nov 5 19:55:38 et kernel: [ 0.738847] ohci_hcd: USB 1.1 'Open' Host
Controller (OHCI) Driver
Nov 5 19:55:38 et kernel: [ 0.739038] ohci_hcd 0000:00:12.0: PCI INT A ->
GSI 16 (level, low) -> IRQ 16
Nov 5 19:55:38 et kernel: [ 0.739136] ohci_hcd 0000:00:12.0: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.739222] ohci_hcd 0000:00:12.0: new USB bus
registered, assigned bus number 3
Nov 5 19:55:38 et kernel: [ 0.739331] ohci_hcd 0000:00:12.0: irq 16, io mem
0xf9ffe000
Nov 5 19:55:38 et kernel: [ 0.797053] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0001
Nov 5 19:55:38 et kernel: [ 0.797123] usb usb3: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 5 19:55:38 et kernel: [ 0.797201] usb usb3: Product: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.797267] usb usb3: Manufacturer: Linux
2.6.32-5-amd64 ohci_hcd
Nov 5 19:55:38 et kernel: [ 0.797333] usb usb3: SerialNumber: 0000:00:12.0
Nov 5 19:55:38 et kernel: [ 0.797476] usb usb3: configuration #1 chosen
from 1 choice
Nov 5 19:55:38 et kernel: [ 0.797562] hub 3-0:1.0: USB hub found
Nov 5 19:55:38 et kernel: [ 0.797635] hub 3-0:1.0: 3 ports detected
Nov 5 19:55:38 et kernel: [ 0.797812] ohci_hcd 0000:00:12.1: PCI INT A ->
GSI 16 (level, low) -> IRQ 16
Nov 5 19:55:38 et kernel: [ 0.797898] ohci_hcd 0000:00:12.1: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.797970] ohci_hcd 0000:00:12.1: new USB bus
registered, assigned bus number 4
Nov 5 19:55:38 et kernel: [ 0.798063] ohci_hcd 0000:00:12.1: irq 16, io mem
0xf9ffd000
Nov 5 19:55:38 et kernel: [ 0.817743] ata1.00: ATA-7: ExcelStor Technology
J8160, P22OA60A, max UDMA/133
Nov 5 19:55:38 et kernel: [ 0.817831] ata1.00: 321672960 sectors, multi 16:
LBA48
Nov 5 19:55:38 et kernel: [ 0.833680] ata1.00: configured for UDMA/100
Nov 5 19:55:38 et kernel: [ 0.849185] scsi 0:0:0:0: Direct-Access ATA
ExcelStor Techno P22O PQ: 0 ANSI: 5
Nov 5 19:55:38 et kernel: [ 0.857053] usb usb4: New USB device found,
idVendor=1d6b, idProduct=0001
Nov 5 19:55:38 et kernel: [ 0.857124] usb usb4: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 5 19:55:38 et kernel: [ 0.857201] usb usb4: Product: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.857267] usb usb4: Manufacturer: Linux
2.6.32-5-amd64 ohci_hcd
Nov 5 19:55:38 et kernel: [ 0.857334] usb usb4: SerialNumber: 0000:00:12.1
Nov 5 19:55:38 et kernel: [ 0.857475] usb usb4: configuration #1 chosen
from 1 choice
Nov 5 19:55:38 et kernel: [ 0.857561] hub 4-0:1.0: USB hub found
Nov 5 19:55:38 et kernel: [ 0.857632] hub 4-0:1.0: 3 ports detected
Nov 5 19:55:38 et kernel: [ 0.857808] ohci_hcd 0000:00:13.0: PCI INT A ->
GSI 18 (level, low) -> IRQ 18
Nov 5 19:55:38 et kernel: [ 0.857896] ohci_hcd 0000:00:13.0: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.857969] ohci_hcd 0000:00:13.0: new USB bus
registered, assigned bus number 5
Nov 5 19:55:38 et kernel: [ 0.858070] ohci_hcd 0000:00:13.0: irq 18, io mem
0xf9ffc000
Nov 5 19:55:38 et kernel: [ 0.917057] usb usb5: New USB device found,
idVendor=1d6b, idProduct=0001
Nov 5 19:55:38 et kernel: [ 0.917128] usb usb5: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 5 19:55:38 et kernel: [ 0.917206] usb usb5: Product: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.917271] usb usb5: Manufacturer: Linux
2.6.32-5-amd64 ohci_hcd
Nov 5 19:55:38 et kernel: [ 0.917338] usb usb5: SerialNumber: 0000:00:13.0
Nov 5 19:55:38 et kernel: [ 0.917479] usb usb5: configuration #1 chosen
from 1 choice
Nov 5 19:55:38 et kernel: [ 0.917564] hub 5-0:1.0: USB hub found
Nov 5 19:55:38 et kernel: [ 0.917637] hub 5-0:1.0: 3 ports detected
Nov 5 19:55:38 et kernel: [ 0.917811] ohci_hcd 0000:00:13.1: PCI INT A ->
GSI 18 (level, low) -> IRQ 18
Nov 5 19:55:38 et kernel: [ 0.917898] ohci_hcd 0000:00:13.1: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.917971] ohci_hcd 0000:00:13.1: new USB bus
registered, assigned bus number 6
Nov 5 19:55:38 et kernel: [ 0.918064] ohci_hcd 0000:00:13.1: irq 18, io mem
0xf9ffb000
Nov 5 19:55:38 et kernel: [ 0.977059] usb usb6: New USB device found,
idVendor=1d6b, idProduct=0001
Nov 5 19:55:38 et kernel: [ 0.977132] usb usb6: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 5 19:55:38 et kernel: [ 0.977210] usb usb6: Product: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.977275] usb usb6: Manufacturer: Linux
2.6.32-5-amd64 ohci_hcd
Nov 5 19:55:38 et kernel: [ 0.977342] usb usb6: SerialNumber: 0000:00:13.1
Nov 5 19:55:38 et kernel: [ 0.977486] usb usb6: configuration #1 chosen
from 1 choice
Nov 5 19:55:38 et kernel: [ 0.977573] hub 6-0:1.0: USB hub found
Nov 5 19:55:38 et kernel: [ 0.977645] hub 6-0:1.0: 3 ports detected
Nov 5 19:55:38 et kernel: [ 0.977812] ata6: SATA link down (SStatus 0
SControl 300)
Nov 5 19:55:38 et kernel: [ 0.977852] ata4: SATA link down (SStatus 0
SControl 300)
Nov 5 19:55:38 et kernel: [ 0.977974] ohci_hcd 0000:00:14.5: PCI INT C ->
GSI 18 (level, low) -> IRQ 18
Nov 5 19:55:38 et kernel: [ 0.978061] ohci_hcd 0000:00:14.5: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 0.978135] ohci_hcd 0000:00:14.5: new USB bus
registered, assigned bus number 7
Nov 5 19:55:38 et kernel: [ 0.978229] ohci_hcd 0000:00:14.5: irq 18, io mem
0xf9ffa000
Nov 5 19:55:38 et kernel: [ 1.041058] usb usb7: New USB device found,
idVendor=1d6b, idProduct=0001
Nov 5 19:55:38 et kernel: [ 1.041128] usb usb7: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Nov 5 19:55:38 et kernel: [ 1.041206] usb usb7: Product: OHCI Host
Controller
Nov 5 19:55:38 et kernel: [ 1.041272] usb usb7: Manufacturer: Linux
2.6.32-5-amd64 ohci_hcd
Nov 5 19:55:38 et kernel: [ 1.041338] usb usb7: SerialNumber: 0000:00:14.5
Nov 5 19:55:38 et kernel: [ 1.047255] usb usb7: configuration #1 chosen
from 1 choice
Nov 5 19:55:38 et kernel: [ 1.047342] hub 7-0:1.0: USB hub found
Nov 5 19:55:38 et kernel: [ 1.047416] hub 7-0:1.0: 2 ports detected
Nov 5 19:55:38 et kernel: [ 1.100378] ata3: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
Nov 5 19:55:38 et kernel: [ 1.103180] ata3.00: ATAPI: HL-DT-ST DVDRAM
GH20NS15, IL00, max UDMA/100
Nov 5 19:55:38 et kernel: [ 1.104048] ata5: SATA link up 3.0 Gbps (SStatus
123 SControl 300)
Nov 5 19:55:38 et kernel: [ 1.107059] ata3.00: configured for UDMA/100
Nov 5 19:55:38 et kernel: [ 1.110524] ata5.00: ATA-7: SAMSUNG HD753LJ,
1AA01113, max UDMA7
Nov 5 19:55:38 et kernel: [ 1.110593] ata5.00: 1465149168 sectors, multi
16: LBA48 NCQ (depth 31/32), AA
Nov 5 19:55:38 et kernel: [ 1.117190] ata5.00: configured for UDMA/133
Nov 5 19:55:38 et kernel: [ 1.234888] scsi 2:0:0:0: CD-ROM HL-
DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
Nov 5 19:55:38 et kernel: [ 1.235178] scsi 4:0:0:0: Direct-Access ATA
SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
Nov 5 19:55:38 et kernel: [ 1.241859] sd 0:0:0:0: [sda] 321672960 512-byte
logical blocks: (164 GB/153 GiB)
Nov 5 19:55:38 et kernel: [ 1.241913] sd 4:0:0:0: [sdb] 1465149168 512-byte
logical blocks: (750 GB/698 GiB)
Nov 5 19:55:38 et kernel: [ 1.241944] sd 4:0:0:0: [sdb] Write Protect is
off
Nov 5 19:55:38 et kernel: [ 1.241946] sd 4:0:0:0: [sdb] Mode Sense: 00 3a
00 00
Nov 5 19:55:38 et kernel: [ 1.241957] sd 4:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Nov 5 19:55:38 et kernel: [ 1.242036] sdb:
Nov 5 19:55:38 et kernel: [ 1.242309] sd 0:0:0:0: [sda] Write Protect is
off
Nov 5 19:55:38 et kernel: [ 1.242435] sd 0:0:0:0: [sda] Mode Sense: 00 3a
00 00
Nov 5 19:55:38 et kernel: [ 1.242511] sd 0:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Nov 5 19:55:38 et kernel: [ 1.242686] sda: sdb1
Nov 5 19:55:38 et kernel: [ 1.246710] sd 4:0:0:0: [sdb] Attached SCSI disk
Nov 5 19:55:38 et kernel: [ 1.254856] sda1 sda2 sda3
Nov 5 19:55:38 et kernel: [ 1.255444] sd 0:0:0:0: [sda] Attached SCSI disk
Nov 5 19:55:38 et kernel: [ 1.603217] sr0: scsi3-mmc drive: 48x/48x writer
dvd-ram cd/rw xa/form2 cdda tray
Nov 5 19:55:38 et kernel: [ 1.603299] Uniform CD-ROM driver Revision: 3.20
Nov 5 19:55:38 et kernel: [ 1.603454] sr 2:0:0:0: Attached scsi CD-ROM sr0
Nov 5 19:55:38 et kernel: [ 1.606136] sd 0:0:0:0: Attached scsi generic sg0
type 0
Nov 5 19:55:38 et kernel: [ 1.606330] sr 2:0:0:0: Attached scsi generic sg1
type 5
Nov 5 19:55:38 et kernel: [ 1.606653] sd 4:0:0:0: Attached scsi generic sg2
type 0
Nov 5 19:55:38 et kernel: [ 2.335600] PM: Starting manual resume from disk
Nov 5 19:55:38 et kernel: [ 2.335669] PM: Resume from partition 8:1
Nov 5 19:55:38 et kernel: [ 2.335733] PM: Checking hibernation image.
Nov 5 19:55:38 et kernel: [ 2.346156] PM: Error -22 checking image file
Nov 5 19:55:38 et kernel: [ 2.346224] PM: Resume from disk failed.
Nov 5 19:55:38 et kernel: [ 2.356098] EXT3-fs: INFO: recovery required on
readonly filesystem.
Nov 5 19:55:38 et kernel: [ 2.356168] EXT3-fs: write access will be enabled
during recovery.
Nov 5 19:55:38 et kernel: [ 4.111314] kjournald starting. Commit interval
5 seconds
Nov 5 19:55:38 et kernel: [ 4.111329] EXT3-fs: sda2: orphan cleanup on
readonly fs
Nov 5 19:55:38 et kernel: [ 4.111335] ext3_orphan_cleanup: deleting
unreferenced inode 4153429
Nov 5 19:55:38 et kernel: [ 4.112202] ext3_orphan_cleanup: deleting
unreferenced inode 363133
Nov 5 19:55:38 et kernel: [ 4.112275] ext3_orphan_cleanup: deleting
unreferenced inode 363125
Nov 5 19:55:38 et kernel: [ 4.112349] ext3_orphan_cleanup: deleting
unreferenced inode 363124
Nov 5 19:55:38 et kernel: [ 4.112420] ext3_orphan_cleanup: deleting
unreferenced inode 363113
Nov 5 19:55:38 et kernel: [ 4.112491] ext3_orphan_cleanup: deleting
unreferenced inode 363099
Nov 5 19:55:38 et kernel: [ 4.112561] ext3_orphan_cleanup: deleting
unreferenced inode 363083
Nov 5 19:55:38 et kernel: [ 4.112632] ext3_orphan_cleanup: deleting
unreferenced inode 363082
Nov 5 19:55:38 et kernel: [ 4.112703] ext3_orphan_cleanup: deleting
unreferenced inode 363054
Nov 5 19:55:38 et kernel: [ 4.112773] ext3_orphan_cleanup: deleting
unreferenced inode 363025
Nov 5 19:55:38 et kernel: [ 4.112844] ext3_orphan_cleanup: deleting
unreferenced inode 363022
Nov 5 19:55:38 et kernel: [ 4.112915] ext3_orphan_cleanup: deleting
unreferenced inode 362499
Nov 5 19:55:38 et kernel: [ 4.112986] ext3_orphan_cleanup: deleting
unreferenced inode 363019
Nov 5 19:55:38 et kernel: [ 4.113054] EXT3-fs: sda2: 13 orphan inodes
deleted
Nov 5 19:55:38 et kernel: [ 4.113120] EXT3-fs: recovery complete.
Nov 5 19:55:38 et kernel: [ 4.118095] EXT3-fs: mounted filesystem with
ordered data mode.
Nov 5 19:55:38 et kernel: [ 5.427366] udev[420]: starting version 164
Nov 5 19:55:38 et kernel: [ 5.796562] processor LNXCPU:00: registered as
cooling_device0
Nov 5 19:55:38 et kernel: [ 5.796764] processor LNXCPU:01: registered as
cooling_device1
Nov 5 19:55:38 et kernel: [ 5.798451] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Nov 5 19:55:38 et kernel: [ 5.798572] ACPI: Power Button [PWRB]
Nov 5 19:55:38 et kernel: [ 5.798677] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Nov 5 19:55:38 et kernel: [ 5.798772] ACPI: Power Button [PWRF]
Nov 5 19:55:38 et kernel: [ 5.799460] ACPI: WMI: Mapper loaded
Nov 5 19:55:38 et kernel: [ 6.045083] ACPI: I/O resource piix4_smbus
[0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
Nov 5 19:55:38 et kernel: [ 6.045167] ACPI: If an ACPI driver is available
for this device, you should use it instead of the native driver
Nov 5 19:55:38 et kernel: [ 6.154015] logips2pp: Detected unknown logitech
mouse model 106
Nov 5 19:55:38 et kernel: [ 6.328920] input: PC Speaker as
/devices/platform/pcspkr/input/input4
Nov 5 19:55:38 et kernel: [ 6.329206] EDAC MC: Ver: 2.1.0 Oct 3 2011
Nov 5 19:55:38 et kernel: [ 6.425036] cfg80211: Using static regulatory
domain info
Nov 5 19:55:38 et kernel: [ 6.425105] cfg80211: Regulatory domain: US
Nov 5 19:55:38 et kernel: [ 6.425170] (start_freq - end_freq @
bandwidth), (max_antenna_gain, max_eirp)
Nov 5 19:55:38 et kernel: [ 6.425249] (2402000 KHz - 2472000 KHz @
40000 KHz), (600 mBi, 2700 mBm)
Nov 5 19:55:38 et kernel: [ 6.425317] (5170000 KHz - 5190000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Nov 5 19:55:38 et kernel: [ 6.425385] (5190000 KHz - 5210000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Nov 5 19:55:38 et kernel: [ 6.425452] (5210000 KHz - 5230000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Nov 5 19:55:38 et kernel: [ 6.425520] (5230000 KHz - 5330000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Nov 5 19:55:38 et kernel: [ 6.425588] (5735000 KHz - 5835000 KHz @
40000 KHz), (600 mBi, 3000 mBm)
Nov 5 19:55:38 et kernel: [ 6.425706] cfg80211: Calling CRDA for country:
US
Nov 5 19:55:38 et kernel: [ 6.476148] EDAC amd64_edac: Ver: 3.2.0 Oct 3
2011
Nov 5 19:55:38 et kernel: [ 6.476319] EDAC amd64: This node reports that
Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
Nov 5 19:55:38 et kernel: [ 6.476410] EDAC amd64: ECC disabled in the BIOS
or no ECC capability, module will not load.
Nov 5 19:55:38 et kernel: [ 6.476411] Either enable ECC checking or force
module loading by setting 'ecc_enable_override'.
Nov 5 19:55:38 et kernel: [ 6.476412] (Note that use of the override may
cause unknown side effects.)
Nov 5 19:55:38 et kernel: [ 6.476665] amd64_edac: probe of 0000:00:18.2
failed with error -22
Nov 5 19:55:38 et kernel: [ 6.640325] input: ImExPS/2 Logitech Explorer
Mouse as /devices/platform/i8042/serio1/input/input5
Nov 5 19:55:38 et kernel: [ 6.663045] [drm] Initialized drm 1.1.0 20060810
Nov 5 19:55:38 et kernel: [ 6.834601] ath5k 0000:03:07.0: PCI INT A -> GSI
22 (level, low) -> IRQ 22
Nov 5 19:55:38 et kernel: [ 6.834734] ath5k 0000:03:07.0: registered as
'phy0'
Nov 5 19:55:38 et kernel: [ 7.365986] HDA Intel 0000:00:14.2: PCI INT A ->
GSI 16 (level, low) -> IRQ 16
Nov 5 19:55:38 et kernel: [ 7.437611] ath: EEPROM regdomain: 0x809c
Nov 5 19:55:38 et kernel: [ 7.437676] ath: EEPROM indicates we should
expect a country code
Nov 5 19:55:38 et kernel: [ 7.437743] ath: doing EEPROM country->regdmn map
search
Nov 5 19:55:38 et kernel: [ 7.437809] ath: country maps to regdmn code:
0x52
Nov 5 19:55:38 et kernel: [ 7.437874] ath: Country alpha2 being used: CN
Nov 5 19:55:38 et kernel: [ 7.437938] ath: Regpair used: 0x52
Nov 5 19:55:38 et kernel: [ 7.438066] nouveau 0000:01:00.0: PCI INT A ->
GSI 18 (level, low) -> IRQ 18
Nov 5 19:55:38 et kernel: [ 7.438137] nouveau 0000:01:00.0: setting latency
timer to 64
Nov 5 19:55:38 et kernel: [ 7.443154] [drm] nouveau 0000:01:00.0: Detected
an NV50 generation card (0x092a80a2)
Nov 5 19:55:38 et kernel: [ 7.443865] [drm] nouveau 0000:01:00.0:
Attempting to load BIOS image from PRAMIN
Nov 5 19:55:38 et kernel: [ 7.526194] [drm] nouveau 0000:01:00.0: ...
appears to be valid
Nov 5 19:55:38 et kernel: [ 7.526262] [drm] nouveau 0000:01:00.0: BIT BIOS
found
Nov 5 19:55:38 et kernel: [ 7.526328] [drm] nouveau 0000:01:00.0: Bios
version 62.92.9a.00
Nov 5 19:55:38 et kernel: [ 7.526396] [drm] nouveau 0000:01:00.0: TMDS
table revision 2.0 not currently supported
Nov 5 19:55:38 et kernel: [ 7.526475] [drm] nouveau 0000:01:00.0: Found
Display Configuration Block version 4.0
Nov 5 19:55:38 et kernel: [ 7.526554] [drm] nouveau 0000:01:00.0: DCB
connector table: VHER 0x40 5 16 4
Nov 5 19:55:38 et kernel: [ 7.526623] [drm] nouveau 0000:01:00.0: 0:
0x00001030: type 0x30 idx 0 tag 0x07
Nov 5 19:55:38 et kernel: [ 7.526702] [drm] nouveau 0000:01:00.0: 1:
0x00000100: type 0x00 idx 1 tag 0xff
Nov 5 19:55:38 et kernel: [ 7.526780] [drm] nouveau 0000:01:00.0: 2:
0x00002261: type 0x61 idx 2 tag 0x08
Nov 5 19:55:38 et kernel: [ 7.526858] [drm] nouveau 0000:01:00.0: Raw DCB
entry 0: 04011310 00000028
Nov 5 19:55:38 et kernel: [ 7.526927] [drm] nouveau 0000:01:00.0: Raw DCB
entry 1: 02000300 00020028
Nov 5 19:55:38 et kernel: [ 7.526995] [drm] nouveau 0000:01:00.0: Raw DCB
entry 2: 01000302 00020030
Nov 5 19:55:38 et kernel: [ 7.527063] [drm] nouveau 0000:01:00.0: Raw DCB
entry 3: 02022322 00020010
Nov 5 19:55:38 et kernel: [ 7.527131] [drm] nouveau 0000:01:00.0: Raw DCB
entry 4: 0000000e 00000000
Nov 5 19:55:38 et kernel: [ 7.527206] [drm] nouveau 0000:01:00.0: Parsing
VBIOS init table 0 at offset 0xC7E5
Nov 5 19:55:38 et kernel: [ 7.580231] [drm] nouveau 0000:01:00.0: Parsing
VBIOS init table 1 at offset 0xCD9A
Nov 5 19:55:38 et kernel: [ 7.596031] [drm] nouveau 0000:01:00.0: Parsing
VBIOS init table 2 at offset 0xDB78
Nov 5 19:55:38 et kernel: [ 7.596124] [drm] nouveau 0000:01:00.0: Parsing
VBIOS init table 3 at offset 0xDC76
Nov 5 19:55:38 et kernel: [ 7.602142] hda_codec: ALC888: BIOS auto-probing.
Nov 5 19:55:38 et kernel: [ 7.603694] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:14.2/input/input6
Nov 5 19:55:38 et kernel: [ 7.608714] [drm] nouveau 0000:01:00.0: Parsing
VBIOS init table 4 at offset 0xDEE2
Nov 5 19:55:38 et kernel: [ 7.608796] [drm] nouveau 0000:01:00.0: Parsing
VBIOS init table at offset 0xDF47
Nov 5 19:55:38 et kernel: [ 7.622152] phy0: Selected rate control algorithm
'minstrel'
Nov 5 19:55:38 et kernel: [ 7.622644] ath5k phy0: Atheros AR2413 chip found
(MAC: 0x78, PHY: 0x45)
Nov 5 19:55:38 et kernel: [ 7.622760] cfg80211: Calling CRDA for country:
CN
Nov 5 19:55:38 et kernel: [ 7.636044] [drm] nouveau 0000:01:00.0: 0xDF47:
Condition still not met after 20ms, skipping following opcodes
Nov 5 19:55:38 et kernel: [ 7.636141] [drm] nouveau 0000:01:00.0: 0xB970:
parsing output script 0
Nov 5 19:55:38 et kernel: [ 7.636210] [drm] nouveau 0000:01:00.0: 0xB970:
parsing output script 0
Nov 5 19:55:38 et kernel: [ 7.802370] [TTM] Zone kernel: Available
graphics memory: 2030612 kiB.
Nov 5 19:55:38 et kernel: [ 7.802448] [drm] nouveau 0000:01:00.0: 1024 MiB
VRAM
Nov 5 19:55:38 et kernel: [ 7.813852] [drm] nouveau 0000:01:00.0: 512 MiB
GART (aperture)
Nov 5 19:55:38 et kernel: [ 7.814275] [drm] nouveau 0000:01:00.0:
Allocating FIFO number 1
Nov 5 19:55:38 et kernel: [ 7.817127] [drm] nouveau 0000:01:00.0:
nouveau_channel_alloc: initialised FIFO 1
Nov 5 19:55:38 et kernel: [ 7.817692] [drm] nouveau 0000:01:00.0: Detected
a DAC output
Nov 5 19:55:38 et kernel: [ 7.817760] [drm] nouveau 0000:01:00.0: Detected
a DAC output
Nov 5 19:55:38 et kernel: [ 7.817840] [drm] nouveau 0000:01:00.0: Detected
a TMDS output
Nov 5 19:55:38 et kernel: [ 7.817923] [drm] nouveau 0000:01:00.0: Detected
a TMDS output
Nov 5 19:55:38 et kernel: [ 7.818009] [drm] nouveau 0000:01:00.0: Detected
a VGA connector
Nov 5 19:55:38 et kernel: [ 7.818129] [drm] nouveau 0000:01:00.0: Detected
a DVI-I connector
Nov 5 19:55:38 et kernel: [ 7.818223] [drm] nouveau 0000:01:00.0: Detected
a DVI-D connector
Nov 5 19:55:38 et kernel: [ 8.010387] [drm] nouveau 0000:01:00.0: allocated
1280x1024 fb: 0x40250000, bo ffff88012eb95000
Nov 5 19:55:38 et kernel: [ 8.016398] [drm] nouveau 0000:01:00.0: 0x11C1:
parsing clock script 0
Nov 5 19:55:38 et kernel: [ 8.016900] Console: switching to colour frame
buffer device 160x64
Nov 5 19:55:38 et kernel: [ 8.018565] fb0: nouveaufb frame buffer device
Nov 5 19:55:38 et kernel: [ 8.018576] registered panic notifier
Nov 5 19:55:38 et kernel: [ 8.018587] [drm] Initialized nouveau 0.0.15
20090420 for 0000:01:00.0 on minor 0
Nov 5 19:55:38 et kernel: [ 8.387356] Adding 979924k swap on /dev/sda1.
Priority:-1 extents:1 across:979924k
Nov 5 19:55:38 et kernel: [ 8.481199] EXT3 FS on sda2, internal journal
Nov 5 19:55:38 et kernel: [ 8.549407] loop: module loaded
Nov 5 19:55:38 et kernel: [ 8.585581] netconsole: local port 6666
Nov 5 19:55:38 et kernel: [ 8.585595] netconsole: local IP 10.0.1.1
Nov 5 19:55:38 et kernel: [ 8.585600] netconsole: interface eth0
Nov 5 19:55:38 et kernel: [ 8.585604] netconsole: remote port 6666
Nov 5 19:55:38 et kernel: [ 8.585609] netconsole: remote IP 10.0.1.2
Nov 5 19:55:38 et kernel: [ 8.585614] netconsole: remote ethernet address
00:24:8c:28:09:71
Nov 5 19:55:38 et kernel: [ 8.585621] netconsole: device eth0 not up yet,
forcing it
Nov 5 19:55:38 et kernel: [ 8.585910] r8169 0000:02:00.0: firmware:
requesting rtl_nic/rtl8168d-1.fw
Nov 5 19:55:38 et kernel: [ 8.655553] r8169 0000:02:00.0: eth0: link down
Nov 5 19:55:38 et kernel: [ 8.655939] ADDRCONF(NETDEV_UP): eth0: link is
not ready
Nov 5 19:55:38 et kernel: [ 12.656028] netconsole: timeout waiting for
carrier
Nov 5 19:55:38 et kernel: [ 13.010171] console [netcon0] enabled
Nov 5 19:55:38 et kernel: [ 13.010173] netconsole: network logging started
Nov 5 19:55:38 et kernel: [ 13.506106] kjournald starting. Commit interval
5 seconds
Nov 5 19:55:38 et kernel: [ 13.506430] EXT3 FS on sdb1, internal journal
Nov 5 19:55:38 et kernel: [ 13.506736] EXT3-fs: mounted filesystem with
ordered data mode.
Nov 5 19:55:38 et kernel: [ 14.074298] fuse init (API version 7.13)
Nov 5 19:55:40 et kernel: [ 16.817174] ADDRCONF(NETDEV_UP): wlan0: link is
not ready
Nov 5 19:55:42 et kernel: [ 18.452861] Bluetooth: Core ver 2.15
Nov 5 19:55:42 et kernel: [ 18.452916] NET: Registered protocol family 31
Nov 5 19:55:42 et kernel: [ 18.452919] Bluetooth: HCI device and connection
manager initialized
Nov 5 19:55:42 et kernel: [ 18.452927] Bluetooth: HCI socket layer
initialized
Nov 5 19:55:42 et kernel: [ 18.481571] Bluetooth: L2CAP ver 2.14
Nov 5 19:55:42 et kernel: [ 18.481580] Bluetooth: L2CAP socket layer
initialized
Nov 5 19:55:42 et kernel: [ 18.498982] Bluetooth: RFCOMM TTY layer
initialized
Nov 5 19:55:42 et kernel: [ 18.498992] Bluetooth: RFCOMM socket layer
initialized
Nov 5 19:55:42 et kernel: [ 18.499002] Bluetooth: RFCOMM ver 1.11
Nov 5 19:55:42 et kernel: [ 18.563603] Bluetooth: BNEP (Ethernet Emulation)
ver 1.3
Nov 5 19:55:42 et kernel: [ 18.563612] Bluetooth: BNEP filters: protocol
multicast
Nov 5 19:55:42 et kernel: [ 18.590651] Bridge firewalling registered
Nov 5 19:55:42 et kernel: [ 18.649285] Bluetooth: SCO (Voice Link) ver 0.6
Nov 5 19:55:42 et kernel: [ 18.649294] Bluetooth: SCO socket layer
initialized
Nov 5 19:55:42 et kernel: [ 18.973463] lp: driver loaded but no devices
found
Nov 5 19:55:42 et kernel: [ 19.014238] ppdev: user-space parallel port
driver
Nov 5 19:55:43 et kernel: [ 19.108709] powernow-k8: Found 1 AMD Athlon(tm)
II X2 250 Processor processors (2 cpu cores) (version 2.20.00)
Nov 5 19:55:43 et kernel: [ 19.108762] powernow-k8: 0 : pstate 0 (3000
MHz)
Nov 5 19:55:43 et kernel: [ 19.108765] powernow-k8: 1 : pstate 1 (2300
MHz)
Nov 5 19:55:43 et kernel: [ 19.108768] powernow-k8: 2 : pstate 2 (1800
MHz)
Nov 5 19:55:43 et kernel: [ 19.108774] powernow-k8: 3 : pstate 3 (800
MHz)
Nov 5 19:55:48 et kernel: [ 24.541367] CPU0 attaching NULL sched-domain.
Nov 5 19:55:48 et kernel: [ 24.541403] CPU1 attaching NULL sched-domain.
Nov 5 19:55:48 et kernel: [ 24.564547] CPU0 attaching sched-domain:
Nov 5 19:55:48 et kernel: [ 24.564572] domain 0: span 0-1 level MC
Nov 5 19:55:48 et kernel: [ 24.564598] groups: group ffff88000540fbf0 cpus
0 group ffff88000544fbf0 cpus 1
Nov 5 19:55:48 et kernel: [ 24.564644] CPU1 attaching sched-domain:
Nov 5 19:55:48 et kernel: [ 24.564653] domain 0: span 0-1 level MC
Nov 5 19:55:48 et kernel: [ 24.564671] groups: group ffff88000544fbf0 cpus
1 group ffff88000540fbf0 cpus 0
Nov 5 19:56:02 et kernel: [ 38.206285] wlan0: direct probe to AP
00:24:fe:ac:19:af (try 1)
Nov 5 19:56:02 et kernel: [ 38.208740] wlan0: direct probe responded
Nov 5 19:56:02 et kernel: [ 38.208749] wlan0: authenticate with AP
00:24:fe:ac:19:af (try 1)
Nov 5 19:56:02 et kernel: [ 38.211270] wlan0: authenticated
Nov 5 19:56:02 et kernel: [ 38.211336] wlan0: associate with AP
00:24:fe:ac:19:af (try 1)
Nov 5 19:56:02 et kernel: [ 38.227252] wlan0: RX AssocResp from
00:24:fe:ac:19:af (capab=0x411 status=0 aid=1)
Nov 5 19:56:02 et kernel: [ 38.227262] wlan0: associated
Nov 5 19:56:02 et kernel: [ 38.228256] ADDRCONF(NETDEV_CHANGE): wlan0: link
becomes ready
Nov 5 19:56:02 et kernel: [ 38.510911] padlock: VIA PadLock not detected.
Nov 5 19:56:12 et kernel: [ 48.280040] wlan0: no IPv6 routers present
Nov 5 19:56:36 et kernel: [ 72.511629] r8169 0000:02:00.0: eth0: link up
Nov 5 19:56:36 et kernel: [ 72.512985] ADDRCONF(NETDEV_CHANGE): eth0: link
becomes ready
Nov 5 19:56:37 et kernel: [ 73.058067] r8169 0000:02:00.0: eth0: link down
Nov 5 19:56:38 et kernel: [ 74.650783] r8169 0000:02:00.0: eth0: link up
Nov 5 19:56:40 et kernel: [ 76.706733] r8169 0000:02:00.0: eth0: link down
Nov 5 19:56:44 et kernel: [ 80.278179] r8169 0000:02:00.0: eth0: link up
Nov 5 19:56:47 et kernel: [ 83.160038] eth0: no IPv6 routers present
Nov 5 19:57:39 et kernel: [ 135.590666] process `skype' is using obsolete
setsockopt SO_BSDCOMPAT
Nov 5 19:59:35 et kernel: [ 251.533423] usb 2-1: new high speed USB device
using ehci_hcd and address 2
Nov 5 19:59:35 et kernel: [ 251.667279] usb 2-1: New USB device found,
idVendor=13fe, idProduct=3123
Nov 5 19:59:35 et kernel: [ 251.667292] usb 2-1: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Nov 5 19:59:35 et kernel: [ 251.667306] usb 2-1: Product: STORE N GO
Nov 5 19:59:35 et kernel: [ 251.667308] usb 2-1: Manufacturer: Verbatim
Nov 5 19:59:35 et kernel: [ 251.667311] usb 2-1: SerialNumber: 078A1B760525
Nov 5 19:59:35 et kernel: [ 251.667422] usb 2-1: configuration #1 chosen from
1 choice
Nov 5 19:59:35 et kernel: [ 251.749029] Initializing USB Mass Storage
driver...
Nov 5 19:59:35 et kernel: [ 251.749169] scsi6 : SCSI emulation for USB Mass
Storage devices
Nov 5 19:59:35 et kernel: [ 251.749294] usbcore: registered new interface
driver usb-storage
Nov 5 19:59:35 et kernel: [ 251.749301] USB Mass Storage support registered.
Nov 5 19:59:35 et kernel: [ 251.750872] usb-storage: device found at 2
Nov 5 19:59:35 et kernel: [ 251.750884] usb-storage: waiting for device to
settle before scanning
Nov 5 19:59:40 et kernel: [ 256.748562] usb-storage: device scan complete
Nov 5 19:59:40 et kernel: [ 256.784952] scsi 6:0:0:0: Direct-Access
Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
Nov 5 19:59:40 et kernel: [ 256.785392] sd 6:0:0:0: Attached scsi generic sg3
type 0
Nov 5 19:59:41 et kernel: [ 257.174500] sd 6:0:0:0: [sdc] 15646720 512-byte
logical blocks: (8.01 GB/7.46 GiB)
Nov 5 19:59:41 et kernel: [ 257.175108] sd 6:0:0:0: [sdc] Write Protect is
off
Nov 5 19:59:41 et kernel: [ 257.175120] sd 6:0:0:0: [sdc] Mode Sense: 23 00
00 00
Nov 5 19:59:41 et kernel: [ 257.175130] sd 6:0:0:0: [sdc] Assuming drive
cache: write through
Nov 5 19:59:41 et kernel: [ 257.178762] sd 6:0:0:0: [sdc] Assuming drive
cache: write through
Nov 5 19:59:41 et kernel: [ 257.178788] sdc: sdc1
Nov 5 19:59:41 et kernel: [ 257.211826] sd 6:0:0:0: [sdc] Assuming drive
cache: write through
Nov 5 19:59:41 et kernel: [ 257.211851] sd 6:0:0:0: [sdc] Attached SCSI
removable disk
Nov 5 19:59:57 et kernel: [ 273.728398] usb 2-1: USB disconnect, address 2
Nov 5 20:00:40 et kernel: [ 316.943019] r8169 0000:02:00.0: eth0: link down
Nov 5 20:00:42 et kernel: [ 318.504658] r8169 0000:02:00.0: eth0: link up
Nov 5 21:46:24 et kernel: [ 6660.764078] usb 2-1: new high speed USB device
using ehci_hcd and address 3
Nov 5 21:46:24 et kernel: [ 6660.900011] usb 2-1: New USB device found,
idVendor=13fe, idProduct=3123
Nov 5 21:46:24 et kernel: [ 6660.900030] usb 2-1: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Nov 5 21:46:24 et kernel: [ 6660.900050] usb 2-1: Product: STORE N GO
Nov 5 21:46:24 et kernel: [ 6660.900056] usb 2-1: Manufacturer: Verbatim
Nov 5 21:46:24 et kernel: [ 6660.900066] usb 2-1: SerialNumber: 078A1B760525
Nov 5 21:46:24 et kernel: [ 6660.900264] usb 2-1: configuration #1 chosen from
1 choice
Nov 5 21:46:24 et kernel: [ 6660.900959] scsi7 : SCSI emulation for USB Mass
Storage devices
Nov 5 21:46:24 et kernel: [ 6660.901176] usb-storage: device found at 3
Nov 5 21:46:24 et kernel: [ 6660.901186] usb-storage: waiting for device to
settle before scanning
Nov 5 21:46:29 et kernel: [ 6665.900403] usb-storage: device scan complete
Nov 5 21:46:29 et kernel: [ 6665.936837] scsi 7:0:0:0: Direct-Access
Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
Nov 5 21:46:29 et kernel: [ 6665.938707] sd 7:0:0:0: Attached scsi generic sg3
type 0
Nov 5 21:46:30 et kernel: [ 6666.317522] sd 7:0:0:0: [sdc] 15646720 512-byte
logical blocks: (8.01 GB/7.46 GiB)
Nov 5 21:46:30 et kernel: [ 6666.318140] sd 7:0:0:0: [sdc] Write Protect is
off
Nov 5 21:46:30 et kernel: [ 6666.318164] sd 7:0:0:0: [sdc] Mode Sense: 23 00
00 00
Nov 5 21:46:30 et kernel: [ 6666.318174] sd 7:0:0:0: [sdc] Assuming drive
cache: write through
Nov 5 21:46:30 et kernel: [ 6666.323017] sd 7:0:0:0: [sdc] Assuming drive
cache: write through
Nov 5 21:46:30 et kernel: [ 6666.323043] sdc: sdc1
Nov 5 21:46:30 et kernel: [ 6666.355737] sd 7:0:0:0: [sdc] Assuming drive
cache: write through
Nov 5 21:46:30 et kernel: [ 6666.355761] sd 7:0:0:0: [sdc] Attached SCSI
removable disk
Nov 5 22:10:29 et kernel: [ 8105.722000] UDF-fs: No VRS found
Nov 5 22:10:29 et kernel: [ 8105.722018] UDF-fs: No partition found (1)
Nov 5 22:10:29 et kernel: [ 8105.737404] ISO 9660 Extensions: Microsoft Joliet
Level 3
Nov 5 22:10:29 et kernel: [ 8105.754661] ISOFS: changing to secondary root
Nov 5 22:13:17 et kernel: [ 8273.497946] usb 2-1: USB disconnect, address 3
Saved via Netconsole over LAN:
[13308.522578] ohci_hcd 0000:00:12.0: HC died; cleaning up
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-38) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 03:59:20 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=09bd4fd5-1239-4a49-afb0-7fbe0f216358 ro debug ignore_loglevel
** Not tainted
** Kernel log:
[ 7.180197] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xDF47
[ 7.204029] [drm] nouveau 0000:01:00.0: 0xDF47: Condition still not met after 20ms, skipping following opcodes
[ 7.204120] [drm] nouveau 0000:01:00.0: 0xB970: parsing output script 0
[ 7.204189] [drm] nouveau 0000:01:00.0: 0xB970: parsing output script 0
[ 7.368175] ath5k 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.368303] ath5k 0000:03:07.0: registered as 'phy0'
[ 7.912036] [TTM] Zone kernel: Available graphics memory: 2030612 kiB.
[ 7.912111] [drm] nouveau 0000:01:00.0: 1024 MiB VRAM
[ 7.923300] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 7.923717] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 7.926565] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 7.927079] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 7.927146] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 7.927213] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 7.927280] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 7.927347] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 7.927458] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 7.927546] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 8.050315] ath: EEPROM regdomain: 0x809c
[ 8.050385] ath: EEPROM indicates we should expect a country code
[ 8.050458] ath: doing EEPROM country->regdmn map search
[ 8.056304] ath: country maps to regdmn code: 0x52
[ 8.056376] ath: Country alpha2 being used: CN
[ 8.056446] ath: Regpair used: 0x52
[ 8.084662] phy0: Selected rate control algorithm 'minstrel'
[ 8.085144] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[ 8.085239] cfg80211: Calling CRDA for country: CN
[ 8.172060] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88012e09d800
[ 8.178054] [drm] nouveau 0000:01:00.0: 0x11C1: parsing clock script 0
[ 8.178585] Console: switching to colour frame buffer device 160x64
[ 8.180256] fb0: nouveaufb frame buffer device
[ 8.180266] registered panic notifier
[ 8.180278] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 8.536862] Adding 979924k swap on /dev/sda1. Priority:-1 extents:1 across:979924k
[ 8.672423] EXT3 FS on sda2, internal journal
[ 8.740576] loop: module loaded
[ 8.776735] netconsole: local port 6666
[ 8.776748] netconsole: local IP 10.0.1.1
[ 8.776752] netconsole: interface eth0
[ 8.776757] netconsole: remote port 6666
[ 8.776761] netconsole: remote IP 10.0.1.2
[ 8.776765] netconsole: remote ethernet address 00:24:8c:28:09:71
[ 8.776773] netconsole: device eth0 not up yet, forcing it
[ 8.777062] r8169 0000:02:00.0: firmware: requesting rtl_nic/rtl8168d-1.fw
[ 8.846895] r8169 0000:02:00.0: eth0: link down
[ 8.846910] r8169 0000:02:00.0: eth0: link down
[ 8.847324] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.429526] r8169 0000:02:00.0: eth0: link up
[ 10.429902] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.786215] console [netcon0] enabled
[ 10.786553] netconsole: network logging started
[ 11.394071] kjournald starting. Commit interval 5 seconds
[ 11.394391] EXT3 FS on sdb1, internal journal
[ 11.394695] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.449845] fuse init (API version 7.13)
[ 16.555425] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.235749] Bluetooth: Core ver 2.15
[ 18.235797] NET: Registered protocol family 31
[ 18.235800] Bluetooth: HCI device and connection manager initialized
[ 18.235807] Bluetooth: HCI socket layer initialized
[ 18.469166] Bluetooth: L2CAP ver 2.14
[ 18.469180] Bluetooth: L2CAP socket layer initialized
[ 18.473114] Bluetooth: RFCOMM TTY layer initialized
[ 18.473131] Bluetooth: RFCOMM socket layer initialized
[ 18.473134] Bluetooth: RFCOMM ver 1.11
[ 18.535432] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.535443] Bluetooth: BNEP filters: protocol multicast
[ 18.592950] Bridge firewalling registered
[ 18.802581] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.802591] Bluetooth: SCO socket layer initialized
[ 19.355711] lp: driver loaded but no devices found
[ 19.371432] ppdev: user-space parallel port driver
[ 20.023895] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor processors (2 cpu cores) (version 2.20.00)
[ 20.023949] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 20.023952] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 20.023955] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 20.023961] powernow-k8: 3 : pstate 3 (800 MHz)
[ 20.604365] eth0: no IPv6 routers present
[ 25.731258] CPU0 attaching NULL sched-domain.
[ 25.731290] CPU1 attaching NULL sched-domain.
[ 25.760220] CPU0 attaching sched-domain:
[ 25.760246] domain 0: span 0-1 level MC
[ 25.760261] groups: group ffff88000540fbf0 cpus 0 group ffff88000544fbf0 cpus 1
[ 25.760298] CPU1 attaching sched-domain:
[ 25.760308] domain 0: span 0-1 level MC
[ 25.760323] groups: group ffff88000544fbf0 cpus 1 group ffff88000540fbf0 cpus 0
[ 48.194214] wlan0: direct probe to AP 00:24:fe:ac:19:af (try 1)
[ 48.196558] wlan0: direct probe responded
[ 48.196570] wlan0: authenticate with AP 00:24:fe:ac:19:af (try 1)
[ 48.198611] wlan0: authenticated
[ 48.198644] wlan0: associate with AP 00:24:fe:ac:19:af (try 1)
[ 48.205254] wlan0: RX AssocResp from 00:24:fe:ac:19:af (capab=0x411 status=0 aid=1)
[ 48.205267] wlan0: associated
[ 48.205951] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 48.302420] padlock: VIA PadLock not detected.
[ 58.708038] wlan0: no IPv6 routers present
[ 73.238880] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 2989.596351] r8169 0000:02:00.0: eth0: link down
[ 2991.182657] r8169 0000:02:00.0: eth0: link up
[ 4995.083120] r8169 0000:02:00.0: eth0: link down
** Model information
sys_vendor: MICRO-STAR INTERNATIONAL CO.,LTD
product_name: MS-7599
product_version: 1.0
chassis_vendor: MICRO-STAR INTERNATIONAL CO.,LTD
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: V1.4
board_vendor: MICRO-STAR INTERNATIONAL CO.,LTD
board_name: 770-C45 (MS-7599)
board_version: 1.0
** Loaded modules:
Module Size Used by
aes_x86_64 7340 1
aes_generic 25714 1 aes_x86_64
powernow_k8 10978 0
cpufreq_powersave 902 0
cpufreq_stats 2740 0
cpufreq_conservative 5162 0
cpufreq_userspace 1992 0
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7225 2
bridge 39646 0
stp 1440 1 bridge
bnep 9427 2
rfcomm 29629 0
l2cap 24752 6 bnep,rfcomm
crc16 1319 1 l2cap
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
binfmt_misc 6431 1
fuse 50924 1
netconsole 5923 0
configfs 19924 2 netconsole
loop 11799 0
arc4 1274 2
ecb 1841 2
ath5k 112210 0
mac80211 137372 1 ath5k
nouveau 353128 2
ttm 40162 1 nouveau
drm_kms_helper 20369 1 nouveau
ath 8006 1 ath5k
drm 142279 3 nouveau,ttm,drm_kms_helper
snd_hda_codec_realtek 235618 1
snd_hda_intel 20035 1
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm 60487 2 snd_hda_intel,snd_hda_codec
snd_seq 42881 0
snd_timer 15598 2 snd_pcm,snd_seq
snd_seq_device 4493 1 snd_seq
edac_core 29261 0
k10temp 2715 0
i2c_algo_bit 4225 1 nouveau
i2c_piix4 8328 0
edac_mce_amd 6433 0
cfg80211 101496 3 ath5k,mac80211,ath
rfkill 13044 4 bluetooth,cfg80211
led_class 2433 1 ath5k
i2c_core 15819 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
snd 46526 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 4598 1 snd
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
psmouse 49937 0
pcspkr 1699 0
serio_raw 3752 0
evdev 7352 8
processor 29935 1 powernow_k8
button 4650 1 nouveau
wmi 4323 0
ext3 106710 2
jbd 37221 1 ext3
mbcache 5050 1 ext3
sg 24069 0
sr_mod 12602 0
cdrom 29415 1 sr_mod
sd_mod 29921 5
crc_t10dif 1276 1 sd_mod
ata_generic 3239 0
ohci_hcd 19343 0
thermal 11674 0
ahci 32534 1
pata_atiixp 3489 2
thermal_sys 11942 2 processor,thermal
r8169 36840 0
mii 3210 1 r8169
libata 133776 3 ata_generic,ahci,pata_atiixp
ehci_hcd 32081 0
scsi_mod 126533 4 sg,sr_mod,sd_mod,libata
usbcore 122674 3 ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#allow-hotplug wlan0
#iface wlan0 inet dhcp
# # wireless-* options are implemented by the wireless-tools package
# wireless-mode managed
# wireless-essid Pingus
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 40:61:86:37:df:d0 brd ff:ff:ff:ff:ff:ff
inet6 fe80::4261:86ff:fe37:dfd0/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 94:0c:6d:a7:3b:1f brd ff:ff:ff:ff:ff:ff
inet 192.168.178.22/24 brd 192.168.178.255 scope global wlan0
inet6 fe80::960c:6dff:fea7:3b1f/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 1a:e3:9b:41:b4:3d brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 23096 587 0 0 0 0 0 0 23096 587 0 0 0 0 0 0
eth0: 720 12 0 0 0 0 0 0 97605 881 0 0 0 0 0 0
wlan0:207120165 289565 0 0 0 0 0 0 30020241 134414 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
290012 total packets received
0 forwarded
0 incoming packets discarded
290012 incoming packets delivered
134844 requests sent out
16 dropped because of missing route
Icmp:
14 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 14
15 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 15
IcmpMsg:
InType3: 14
OutType3: 15
Tcp:
232 active connections openings
7 passive connection openings
11 failed connection attempts
1 connection resets received
0 connections established
49829 segments received
28468 segments send out
124 segments retransmited
0 bad segments received.
214 resets sent
Udp:
240122 packets received
16 packets to unknown port received.
0 packet receive errors
106202 packets sent
UdpLite:
TcpExt:
88 TCP sockets finished time wait in fast timer
439 delayed acks sent
Quick ack mode was activated 37 times
44305 packet headers predicted
641 acknowledgments not containing data payload received
794 predicted acknowledgments
37 congestion windows recovered without slow start after partial ack
1 timeouts after SACK recovery
105 other TCP timeouts
39 DSACKs sent for old packets
36 DSACKs received
4 connections reset due to unexpected data
3 connections aborted due to timeout
TCPDSACKIgnoredOld: 4
TCPDSACKIgnoredNoUndo: 6
IpExt:
InMcastPkts: 55
OutMcastPkts: 76
InBcastPkts: 1
InOctets: 203088997
OutOctets: 25737098
InMcastOctets: 6190
OutMcastOctets: 8985
InBcastOctets: 576
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9ffb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f9fff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at f9ff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Subsystem: ATI Technologies Inc Device [1002:4383]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9ffa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce GTS 250] [10de:0615] (rev a2) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device [10b0:0401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at d800 [size=128]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7599]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at f8fff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f8ff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:07.0 Ethernet controller [0200]: Atheros Communications Inc. AR2413 802.11bg NIC [168c:001a] (rev 01)
Subsystem: Atheros Communications Inc. Compex Wireless 802.11 b/g MiniPCI Adapter, Rev A1 [WLM54G] [168c:2052]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-38 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
Reply to: