Bug#609046: linux-image-2.6-686: pata_via module boot fail with vt6415
Hello, again.
Here is boot log.
But I recompiled this kernel from linux-source-2.6 package for using
netconsole to get this log.
I know, I should not send custom kernel log, but a only way to get this I found.
Because this is storage drivers bug, it will never write log anywhere.
Still exact same problem here.
Any suggestions for better way? or is it enough to you?
Hope you've got my situation.
Thank you.
Aki.
------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-custom (2.6.32)
(root@debian-squeeze-i5) (gcc version 4.4.5 (Debian 4.4.5-8) ) #6 SMP
Thu Jan 13 12:21:35 JST 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-custom
root=UUID=7ff802f7-08d7-4eb6-b9b1-4285d1fc8f7d ro
netconsole=6665@10.0.0.1/eth0,6666@10.0.0.2/
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000d6f60000 (usable)
[ 0.000000] BIOS-e820: 00000000d6f60000 - 00000000d6f78000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d6f78000 - 00000000d6fdc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d6fdc000 - 00000000d7800000 (reserved)
[ 0.000000] BIOS-e820: 00000000d7c00000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xd6f60 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000d6f60000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000118000000
[ 0.000000] RAMDISK: 324a5000 - 37fef5a5
[ 0.000000] ACPI: RSDP 00000000000faaf0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000d6f60100 0006C (v01 081810 XSDT1136
20100818 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000d6f60290 000F4 (v03 081810 FACP1136
20100818 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000d6f604a0 0AEE0 (v01 A1577 A1577001
00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000d6f78000 00040
[ 0.000000] ACPI: APIC 00000000d6f60390 000CC (v01 081810 APIC1136
20100818 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000d6f60460 0003C (v01 081810 OEMMCFG
20100818 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000d6f78040 00073 (v01 081810 OEMB1136
20100818 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000d6f6b380 00038 (v01 081810 OEMHPET
20100818 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000d6f780c0 02024 (v01 081810 GMCHSCI
20100818 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000d6f7a0f0 000E0 (v01 AMI OEMDMAR
00000001 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000d6f6b3c0 000B0 (v01 081810 OEMOSFR
20100818 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000d6f7bc00 00363 (v01 DpgPmm CpuPm
00000012 INTL 20060113)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000118000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000118000000
[ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff]
[ 0.000000] bootmap [000000000001d000 - 000000000003ffff] pages 23
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0118000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001681554] TEXT DATA BSS ==>
[0001000000 - 0001681554]
[ 0.000000] #3 [00324a5000 - 0037fef5a5] RAMDISK ==>
[00324a5000 - 0037fef5a5]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==>
[000009f400 - 0000100000]
[ 0.000000] #5 [0001682000 - 00016822bc] BRK ==>
[0001682000 - 00016822bc]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==>
[0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==>
[0000014000 - 0000015000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00118000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000d6f60
[ 0.000000] 0: 0x00100000 -> 0x00118000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000d6f60000 - 00000000d6f78000
[ 0.000000] PM: Registered nosave memory: 00000000d6f78000 - 00000000d6fdc000
[ 0.000000] PM: Registered nosave memory: 00000000d6fdc000 - 00000000d7800000
[ 0.000000] PM: Registered nosave memory: 00000000d7800000 - 00000000d7c00000
[ 0.000000] PM: Registered nosave memory: 00000000d7c00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap:
e0000000:1ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005000000 s90328
r8192 d24360 u131072
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 962887
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-custom
root=UUID=7ff802f7-08d7-4eb6-b9b1-4285d1fc8f7d ro
netconsole=6665@10.0.0.1/eth0,6666@10.0.0.2/
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff8800051fe000 -
ffff8800091fe000
[ 0.000000] software IO TLB at phys 0x51fe000 - 0x91fe000
[ 0.000000] Memory: 3690940k/4587520k available (3073k kernel code,
672836k absent, 223744k reserved, 1869k data, 588k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:536
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3211.482 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated
using timer frequency.. 6422.96 BogoMIPS (lpj=12845928)
[ 0.000109] Security Framework initialized
[ 0.000156] SELinux: Disabled at boot.
[ 0.000384] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.001465] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001992] Mount-cache hash table entries: 256
[ 0.002128] Initializing cgroup subsys ns
[ 0.002173] Initializing cgroup subsys cpuacct
[ 0.002222] Initializing cgroup subsys devices
[ 0.002269] Initializing cgroup subsys freezer
[ 0.002316] Initializing cgroup subsys net_cls
[ 0.002375] CPU: Physical Processor ID: 0
[ 0.002417] CPU: Processor Core ID: 0
[ 0.002462] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002525] CPU: L2 cache: 256K
[ 0.002568] CPU: L3 cache: 4096K
[ 0.002612] CPU 0/0x0 -> Node 0
[ 0.002655] mce: CPU supports 9 MCE banks
[ 0.002707] CPU0: Thermal monitoring enabled (TM1)
[ 0.002756] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6
[ 0.002891] using mwait in idle threads.
[ 0.002935] Performance Events: Westmere events, Intel PMU driver.
[ 0.003021] ... version: 3
[ 0.003066] ... bit width: 48
[ 0.003112] ... generic registers: 4
[ 0.003155] ... value mask: 0000ffffffffffff
[ 0.003203] ... max period: 000000007fffffff
[ 0.003251] ... fixed-purpose events: 3
[ 0.003294] ... event mask: 000000070000000f
[ 0.003944] ACPI: Core revision 20090903
[ 0.034814] DMAR: Host address width 36
[ 0.034860] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.034912] IOMMU fed90000: ver 1:0 cap c9008020e30272 ecap 1000
[ 0.034963] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.035014] IOMMU fed91000: ver 1:0 cap c0000020230272 ecap 1000
[ 0.035065] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.035116] IOMMU fed93000: ver 1:0 cap c9008020630272 ecap 1000
[ 0.035166] DMAR: RMRR base: 0x000000000e4000 end: 0x000000000e7fff
[ 0.035218] DMAR: RMRR base: 0x000000d7c00000 end: 0x000000dfffffff
[ 0.035269] DMAR: RMRR base: 0x000000d6fec000 end: 0x000000d6ffffff
[ 0.035320] DMAR: No ATSR found
[ 0.035370] Setting APIC routing to physical flat
[ 0.037671] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077296] CPU0: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz stepping 05
[ 0.184861] Booting processor 1 APIC 0x4 ip 0x6000
[ 0.195189] Initializing CPU#1
[ 0.272534] CPU: Physical Processor ID: 0
[ 0.272535] CPU: Processor Core ID: 2
[ 0.272536] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.272537] CPU: L2 cache: 256K
[ 0.272538] CPU: L3 cache: 4096K
[ 0.272540] CPU 1/0x4 -> Node 0
[ 0.272549] CPU1: Thermal monitoring enabled (TM1)
[ 0.272552] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6
[ 0.272609] CPU1: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz stepping 05
[ 0.273095] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.293181] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.303344] Initializing CPU#2
[ 0.380232] CPU: Physical Processor ID: 0
[ 0.380233] CPU: Processor Core ID: 0
[ 0.380235] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.380236] CPU: L2 cache: 256K
[ 0.380237] CPU: L3 cache: 4096K
[ 0.380239] CPU 2/0x1 -> Node 0
[ 0.380249] CPU2: Thermal monitoring enabled (TM1)
[ 0.380252] CPU 2 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
[ 0.380332] CPU2: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz stepping 05
[ 0.380822] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.400914] Booting processor 3 APIC 0x5 ip 0x6000
[ 0.411078] Initializing CPU#3
[ 0.487929] CPU: Physical Processor ID: 0
[ 0.487929] CPU: Processor Core ID: 2
[ 0.487931] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.487932] CPU: L2 cache: 256K
[ 0.487933] CPU: L3 cache: 4096K
[ 0.487934] CPU 3/0x5 -> Node 0
[ 0.487944] CPU3: Thermal monitoring enabled (TM1)
[ 0.487946] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
[ 0.487963] CPU3: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz stepping 05
[ 0.488449] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.508481] Brought up 4 CPUs
[ 0.508524] Total of 4 processors activated (25689.71 BogoMIPS).
[ 0.509895] devtmpfs: initialized
[ 0.512880] regulator: core version 0.5
[ 0.512963] NET: Registered protocol family 16
[ 0.513070] ACPI: bus type pci registered
[ 0.513168] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.513221] PCI: Not using MMCONFIG.
[ 0.513266] PCI: Using configuration type 1 for base access
[ 0.513593] bio: create slab <bio-0> at 0
[ 0.516618] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.525130] ACPI: Interpreter enabled
[ 0.525176] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.525320] ACPI: Using IOAPIC for interrupt routing
[ 0.525407] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.528168] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[ 0.529486] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.537184] ACPI Warning: Incorrect checksum in table [OEMB] - 29,
should be 24 (20090903/tbutils-314)
[ 0.538084] ACPI: No dock devices found.
[ 0.538400] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.538623] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.538676] pci 0000:00:16.0: PME# disabled
[ 0.538807] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.538860] pci 0000:00:1a.0: PME# disabled
[ 0.538965] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.539017] pci 0000:00:1b.0: PME# disabled
[ 0.539107] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.539160] pci 0000:00:1c.0: PME# disabled
[ 0.539250] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.539301] pci 0000:00:1c.1: PME# disabled
[ 0.539393] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.539446] pci 0000:00:1c.4: PME# disabled
[ 0.539573] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.539626] pci 0000:00:1d.0: PME# disabled
[ 0.540072] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[ 0.540124] pci 0000:02:00.0: PME# disabled
[ 0.547953] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.548007] pci 0000:01:00.0: PME# disabled
[ 0.555862] pci 0000:00:1e.0: transparent bridge
[ 0.568267] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.568590] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.568774] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.569095] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12
14 15) *0, disabled.
[ 0.569471] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12
14 15) *0, disabled.
[ 0.569847] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.570168] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.570489] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.570791] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.570868] vgaarb: loaded
[ 0.570946] PCI: Using ACPI for IRQ routing
[ 0.571086] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 0.571289] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.584308] Switching to clocksource tsc
[ 0.585134] pnp: PnP ACPI init
[ 0.585183] ACPI: bus type pnp registered
[ 0.588116] pnp: PnP ACPI: found 15 devices
[ 0.588163] ACPI: ACPI bus type pnp unregistered
[ 0.588214] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.588270] system 00:06: ioport range 0x290-0x29f has been reserved
[ 0.588323] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.588375] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.588427] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.588478] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.588532] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.588585] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.588641] system 00:0a: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 0.588713] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.588768] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.588823] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.588875] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.588928] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.588980] system 00:0e: iomem range 0x100000-0xdfffffff could not
be reserved
[ 0.589053] system 00:0e: iomem range 0xfed90000-0xffffffff could
not be reserved
[ 0.593734] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.593786] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.593836] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf01fffff
[ 0.593888] pci 0000:00:1c.0: PREFETCH window:
0x000000f0200000-0x000000f03fffff
[ 0.593964] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.594014] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.594065] pci 0000:00:1c.1: MEM window: 0xf7f00000-0xf7ffffff
[ 0.594116] pci 0000:00:1c.1: PREFETCH window:
0x000000f0400000-0x000000f05fffff
[ 0.594191] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:01
[ 0.594242] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.594292] pci 0000:00:1c.4: MEM window: 0xf0600000-0xf09fffff
[ 0.594344] pci 0000:00:1c.4: PREFETCH window:
0x000000f6f00000-0x000000f6ffffff
[ 0.594419] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.594469] pci 0000:00:1e.0: IO window: disabled
[ 0.594518] pci 0000:00:1e.0: MEM window: disabled
[ 0.594567] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.594623] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.594679] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.594741] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.594799] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.594894] NET: Registered protocol family 2
[ 0.595039] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.595730] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.597695] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.597993] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.598045] TCP reno registered
[ 0.598198] NET: Registered protocol family 1
[ 0.598337] Unpacking initramfs...
[ 1.927962] Freeing initrd memory: 93481k freed
[ 1.943642] audit: initializing netlink socket (disabled)
[ 1.943701] type=2000 audit(1294896836.776:1): initialized
[ 1.945998] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.946862] VFS: Disk quotas dquot_6.5.2
[ 1.946937] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.947065] msgmni has been set to 7391
[ 1.947251] alg: No test for stdrng (krng)
[ 1.947338] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 1.947412] io scheduler noop registered
[ 1.947457] io scheduler anticipatory registered
[ 1.947504] io scheduler deadline registered
[ 1.947568] io scheduler cfq registered (default)
[ 1.948720] Linux agpgart interface v0.103
[ 1.948773] agpgart-intel 0000:00:00.0: Intel IGDNG/D Chipset
[ 1.949466] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 1.997667] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.997750] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.997893] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.998162] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.998302] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 1.998396] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.998459] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.998541] r8169 0000:01:00.0: unknown MAC, using family default
[ 1.998773] eth0: RTL8168b/8111b at 0xffffc90000670000,
xx:xx:xx:xx:xx:xx, XID 0c200000 IRQ 32
[ 2.000732] netconsole: local port 6665
[ 2.002702] netconsole: local IP 10.0.0.1
[ 2.002748] netconsole: interface eth0
[ 2.002792] netconsole: remote port 6666
[ 2.002837] netconsole: remote IP 10.0.0.2
[ 2.002884] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 2.002934] netconsole: device eth0 not up yet, forcing it
[ 2.003129] r8169: eth0: link down
[ 2.003181] r8169: eth0: link down
[ 4.311804] r8169: eth0: link up
[ 4.352581] console [netcon0] enabled
[ 4.352627] netconsole: network logging started
[ 4.352701] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.352753] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 4.353292] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.353399] mice: PS/2 mouse device common for all mice
[ 4.353475] rtc_cmos 00:03: RTC can wake from S4
[ 4.353547] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.353621] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.353680] cpuidle: using governor ladder
[ 4.353728] cpuidle: using governor menu
[ 4.353778] No iBFT detected.
[ 4.354031] TCP cubic registered
[ 4.354141] NET: Registered protocol family 10
[ 4.354520] lo: Disabled Privacy Extensions
[ 4.354907] Mobile IPv6
[ 4.354952] NET: Registered protocol family 17
[ 4.355057] registered taskstats version 1
[ 4.355389] rtc_cmos 00:03: setting system clock to 2011-01-13
05:34:00 UTC (1294896840)
[ 4.355486] Initalizing network drop monitor service
[ 4.355552] Freeing unused kernel memory: 588k freed
[ 4.355665] Write protecting the kernel read-only data: 4204k
[ 4.364542] udev[77]: starting version 164
[ 4.370236] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 4.407792] SCSI subsystem initialized
[ 4.416520] usbcore: registered new interface driver usbfs
[ 4.416603] usbcore: registered new interface driver hub
[ 4.416679] usbcore: registered new device driver usb
[ 4.421277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.421363] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.421478] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 4.421545] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 4.421636] ehci_hcd 0000:00:1a.0: debug port 2
[ 4.425584] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7ef6000
[ 4.437335] pata_via 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.437509] scsi0 : pata_via
[ 4.437632] scsi1 : pata_via
[ 4.437862] ata1: PATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
[ 4.437917] ata2: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
[ 4.442200] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.442278] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.442331] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.442407] usb usb1: Product: EHCI Host Controller
[ 4.442456] usb usb1: Manufacturer: Linux 2.6.32-custom ehci_hcd
[ 4.442509] usb usb1: SerialNumber: 0000:00:1a.0
[ 4.442615] usb usb1: configuration #1 chosen from 1 choice
[ 4.442685] hub 1-0:1.0: USB hub found
[ 4.442735] hub 1-0:1.0: 2 ports detected
[ 4.442829] ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 4.442886] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.443086] scsi2 : ata_piix
[ 4.443165] scsi3 : ata_piix
[ 4.444157] ata3: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb080 irq 21
[ 4.444214] ata4: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xb088 irq 21
[ 4.444309] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.444406] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 4.444463] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 4.444555] ehci_hcd 0000:00:1d.0: debug port 2
[ 4.448504] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7ef5000
[ 4.462231] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.462311] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.462365] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.462439] usb usb2: Product: EHCI Host Controller
[ 4.462489] usb usb2: Manufacturer: Linux 2.6.32-custom ehci_hcd
[ 4.462542] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.462629] usb usb2: configuration #1 chosen from 1 choice
[ 4.462703] hub 2-0:1.0: USB hub found
[ 4.462754] hub 2-0:1.0: 2 ports detected
[ 4.462839] ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 4.462895] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 4.463082] scsi4 : ata_piix
[ 4.463161] scsi5 : ata_piix
[ 4.464116] ata5: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 21
[ 4.464172] ata6: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 21
[ 4.721885] ata1.00: HPA detected: current 160084415, native 160086528
[ 4.721948] ata1.00: ATA-7: Maxtor 6Y080P0, YAR41BW0, max UDMA/133
[ 4.722009] ata1.00: 160084415 sectors, multi 0: LBA
[ 4.722078] ata1.01: ATAPI: RICOH DVD/CDRW MP9200, 1.30, max UDMA/33
[ 4.738107] ata1.00: configured for UDMA/133
[ 4.753449] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 4.753938] ata1.01: configured for UDMA/33
[ 4.754390] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080P0
YAR4 PQ: 0 ANSI: 5
[ 4.755783] scsi 0:0:1:0: CD-ROM RICOH DVD/CDRW
MP9200 1.30 PQ: 0 ANSI: 5
[ 4.791640] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.802142] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.885147] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.885206] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.885301] usb 1-1: configuration #1 chosen from 1 choice
[ 4.885416] hub 1-1:1.0: USB hub found
[ 4.885515] hub 1-1:1.0: 6 ports detected
[ 5.000535] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 5.090896] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 5.090958] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 5.102990] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 5.103052] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 5.107808] sd 0:0:0:0: [sda] 160084415 512-byte logical blocks:
(81.9 GB/76.3 GiB)
[ 5.107932] sd 0:0:0:0: [sda] Write Protect is off
[ 5.108003] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.108198] sda: sda1 sda2 <
[ 5.132585] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 5.132677] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.132779] usb 2-1: configuration #1 chosen from 1 choice
[ 5.133001] hub 2-1:1.0: USB hub found
[ 5.133206] hub 2-1:1.0: 6 ports detected
[ 5.135964] sda5 sda6 >
[ 5.137962] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 5.138022] Uniform CD-ROM driver Revision: 3.20
[ 5.138042] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.140667] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.140746] sr 0:0:1:0: Attached scsi generic sg1 type 5
--- freeze here ---
Reply to: